[yocto] raspberry Pi core-image-sato booted okay

[Edward Vidal]

i Gary,

I added to my the 2 lines mentioned in the e-mail to my conf/local.conf

PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"

I had saved the original local.conf in ~/wkg/yocto/local.conf before making any changes.

diff -u ~/wkg/yocto/local.conf conf/local.conf
--- /home/vidal/wkg/yocto/local.conf    2015-07-21 08:15:40.228867905 -0600
+++ conf/local.conf    2015-07-23 09:11:45.095116784 -0600
@@ -10,6 +10,25 @@
 # default values are provided as comments to show people example syntax. Enabling
 # the option is a question of removing the # character and making any change to the
 # variable as required.
+PREFERRED_PROVIDER_virtual/egl ?= "vc-graphics-hardfp"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "vc-graphics-hardfp"
+#
+# Parallelism Options
+#
+# These two options control how much parallelism BitBake should use. The first 
+# option determines how many tasks bitbake should run in parallel:
+#
+BB_NUMBER_THREADS = "12"
+# 
+# The second option controls how many processes make should run in parallel when
+# running compile tasks:
+#
+PARALLEL_MAKE = "-j 12"
+#
+# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
+# be appropriate for example.
+
+#
 
 #
 # Machine Selection
@@ -34,7 +53,10 @@
 #MACHINE ?= "edgerouter"
 #
 # This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86"
+#MACHINE ??= "qemux86"
+#MACHINE = "raspberrypi2"
+MACHINE ??= "raspberrypi2"
+GPU_MEM = "16"
 
 #
 # Where to place downloads
@@ -48,7 +70,7 @@
 # The default is a downloads directory under TOPDIR which is the build directory.
 #
 #DL_DIR ?= "${TOPDIR}/downloads"
-
+DL_DIR ?= "/home/vidal/wkg/yocto/downloads"
 #
 # Where to place shared-state files
 #

bitbake userland -c cleansstate

bitbake core-image-sato  

WARNING: QA Issue: gstreamer1.0-plugins-bad: configure was passed unrecognised options: --with-egl-window-system [unknown-configure-option]
NOTE: Tasks Summary: Attempted 5356 tasks of which 4131 didn't need to be rerun and all succeeded.

Summary: There was 1 WARNING message shown.
As root I created the SD 


dd if=tmp/deploy/images/raspberrypi2/core-image-sato-raspberrypi2.rpi-sdimg | pv | sudo dd of=/dev/sdb bs=16M

The Raspberry Pi 2 B boot to graphical sato interface.

Is there anything else that I can provide.
How do you when to use -c cleansstate on a recipe?  This appears to be a handy command.Thanks for all the help!!
Regards
 Edward Vidal Jr.
e-mail develone at sbcglobal.net
915-595-1613
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150723/28c6509d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: local.conf
Type: application/octet-stream
Size: 10703 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150723/28c6509d/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bblayers.conf
Type: application/octet-stream
Size: 531 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150723/28c6509d/attachment-0001.obj>