[yocto] [meta-raspberrypi] raspberry Pi core-image-sato
Gary Thomas
gary at mlbassoc.com
Thu Jul 23 08:11:12 PDT 2015
On 2015-07-23 09:01, Herve Jourdain wrote:
> Hi,
>
> Not sure if it’s the case, because the config.log might give more details, but maybe you can try adding the following to your recipe :
>
> EXTRA_OECONF += “-I${STAGING_DIR_TARGET}/usr/include/interface/vcos/pthreads/ \
>
> -I${STAGING_DIR_TARGET}/usr/include/interface/vmcs_host/linux/"
>
> I needed that to compile other packages that were using EGL.
These should not be needed if you use DEPENDS correctly, bitbake
takes care of them for you.
>
> Once again, just a hint, no warranty whatsoever…
>
> BR,
>
> Hervé
>
> *From:*yocto-bounces at yoctoproject.org <mailto:yocto-bounces at yoctoproject.org> [mailto:yocto-bounces at yoctoproject.org] *On Behalf Of *Edward Vidal
> *Sent:* jeudi 23 juillet 2015 16:38
> *To:* yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> *Subject:* ***SPAM*** [yocto] raspberry Pi core-image-sato
>
> Hi Gary,
>
> Is this the log that you need?
>
> I also ran the bitbake -DD core-image-sato and have the log for that run.
>
> | WARNING: exit code 1 from a shell command.
> | ERROR: oe_runconf failed
> | ERROR: Function failed: do_configure (log file is located at
> /home/vidal/wkg/yocto/RaspberryPi2/poky/build/tmp/work/cortexa7hf-vfp-vfpv4-neon-poky-linux-gnueabi/libepoxy/1.2+gitAUTOINC+20062c25e7-r0/temp/log.do_configure.9672)
> ERROR: Task 4597 (/home/vidal/wkg/yocto/RaspberryPi2/poky/meta/recipes-graphics/libepoxy/libepoxy_git.bb, do_configure) failed with exit code '1'
>
> Let me know what I can provide.
>
> Thanks for the help
>
> Regards,
>
> Edward Vidal Jr.
> e-mail develone at sbcglobal.net <mailto:develone at sbcglobal.net>
> 915-595-1613
>
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the yocto
mailing list