[yocto] Does anybody knows a recipe for open-ath9k-htc-firmware?

[Daniel.]

Ohh I see, thank you so much Gary!

Best regards,
- dhs

2015-07-21 17:47 GMT-03:00 Gary Thomas <gary at mlbassoc.com>:
> On 2015-07-21 14:37, Gary Thomas wrote:
>>
>> On 2015-07-21 12:30, Daniel. wrote:
>>>
>>> Hi all,
>>>
>>> I'm trying to use TPLINK TL-WN722N usb wireless card which is known to
>>> work with ath9k_htc.ko driver and open-ath9k-htc-firmware[1]. I've
>>> compiled the driver built-in with success. When I plug the usb stick I
>>> got this on dmesg:
>>>
>>> usb 2-1.1: ath9k_htc: Firmware htc_9271.fw requested
>>> usb 2-1.1: Direct firmware load failed with error -2
>>> usb 2-1.1: Falling back to user helper
>>> usb 2-1.1: ath9k_htc: Failed to get firmware htc_9271.fw
>>> usb 2-1.1: ath9k_htc: USB layer deinitialized
>>>
>>>
>>> So firmware is missing. Does anybody knows a recipe for it?
>>> Best regards,
>>> - dhs
>>>
>>> [1] https://wireless.wiki.kernel.org/en/users/drivers/ath9k_htc/devices
>>>
>>
>> You need to install the linux-firmware-ath9k package which has this file
>>
>
> Note: this package is built from the linux-firmware recipe, i.e.
>   % bitbake linux-firmware
>
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto



-- 
"Do or do not. There is no try"
  Yoda Master