[yocto] dansguardian

[Mahdi Saadat]

Hi Paul
Thanks for your response the log file is as below:
DEBUG: Executing python function rootfs_process_ignore
DEBUG: Python function rootfs_process_ignore finished
DEBUG: Executing python function rootfs_runtime_mapping
DEBUG: Python function rootfs_runtime_mapping finished
DEBUG: Executing python function do_rootfs
NOTE: configuring RPM platform settings
NOTE: configuring RPM system provides
NOTE: configuring RPM DB settings
NOTE: configuring Smart settings
NOTE: Note: adding Smart channel nimak (45)
NOTE: Note: adding Smart channel core2_32 (40)
NOTE: Note: adding Smart channel all (35)
NOTE: adding Smart RPM DB channel
NOTE: Note: configuring RPM cross-install scriptlet_wrapper
NOTE: ###### Generate rootfs #######
NOTE: Executing
'/home/nimak/poky/build/tmp/sysroots/x86_64-linux/usr/bin/createrepo
--update -q /home/nimak/poky/build/tmp/deploy/rpm/all' ...
NOTE: Executing
'/home/nimak/poky/build/tmp/sysroots/x86_64-linux/usr/bin/createrepo
--update -q /home/nimak/poky/build/tmp/deploy/rpm/nimak' ...
NOTE: Executing
'/home/nimak/poky/build/tmp/sysroots/x86_64-linux/usr/bin/createrepo
--update -q /home/nimak/poky/build/tmp/deploy/rpm/core2_32' .$
NOTE: Installing the following packages: iptables run-postinsts dansguardian
squid clamav snort packagegroup-core-boot
ERROR: dansguardian not found in the base feeds (nimak core2-32-intel-common
core2-32 i586 x86 noarch any all).
acl-2.2.52-r0 at core2_32 acl-dbg-2.2.52-r0 at core2_32 acl-dev-2.2.52-r0 at core2_32
acl-doc-2.2.52-r0 at core2_32 acl-locale-de-2.2.52-r0 at core2_32 acl-local$
DEBUG: Python function do_rootfs finished
ERROR: Function failed: do_rootfs

---------------
Regards
Mahdi 

-----Original Message-----
From: Paul Eggleton [mailto:paul.eggleton at linux.intel.com] 
Sent: Monday, January 26, 2015 2:18 PM
To: Mahdi Saadat
Cc: yocto at yoctoproject.org
Subject: Re: [yocto] dansguardian

Hi Mahdi,

On Saturday 24 January 2015 11:05:45 Mahdi Saadat wrote:
> Does anyone knows about how put dansguardian on core-image-minimal?
> I Did some steps on creating the recipe but had some errors on config
stage.

You'll need to be a bit more specific about the errors you received before
anyone will be able to help.

Cheers,
Paul

-- 

Paul Eggleton
Intel Open Source Technology Centre