[yocto] [meta-security][PATCH] clamav: updated reciped
Armin Kuster
akuster808 at gmail.com
Sun Jan 11 11:27:29 PST 2015
added packaged define and init scripts.
patches are all debian
Signed-off-by: Armin Kuster <akuster808 at gmail.com>
---
...paths-in-sample-conf-file-to-match-Debian.patch | 40 +
...itional-n-after-the-number-in-the-pidfile.patch | 56 +
...increment-test-timeout-from-40secs-to-5mi.patch | 30 +
.../clamav-0.98.5/0004-Fix-compiling-on-Hurd.patch | 50 +
.../0005-Workaround-a-bug-in-libc-on-Hurd.patch | 35 +
...necessary-harmful-flags-from-libclamav.pc.patch | 22 +
.../0007-libclamav-use-libmspack.patch | 4042 ++
...m-systemd-support-for-clamav-daemon-and-c.patch | 655 +
...-fix-ssize_t-size_t-off_t-printf-modifier.patch | 478 +
...VM-linker-flag-because-llvm-config-return.patch | 26 +
...ck-library-from-upstream-without-unnecess.patch | 56090 +++++++++++++++++++
...e-internal-libmspack-if-the-external-is-n.patch | 106 +
...13-fix-autoreconf-with-embedded-libmspack.patch | 27 +
...ONFIG_SRCDIR-llvm-configure-from-libclama.patch | 23 +
...low-to-specificy-a-group-for-the-socket-o.patch | 229 +
...er-add-additinal-SMFIF_-flags-before-invo.patch | 86 +
.../0017-Bump-.so-version-number.patch | 22 +
.../0018-llvm-don-t-use-system-libs.patch | 26 +
.../clamav-0.98.5/clamav-0001-clamdscan.patch | 21 +
.../clamav/clamav-0.98.5/clamav-freshclam.service | 12 +
.../clamav/clamav-0.98.5/clamav-milter.conf.sample | 293 +
.../clamav/clamav-0.98.5/clamav.service | 17 +
recipes-security/clamav/clamav-0.98.5/clamd.conf | 595 +
.../clamav/clamav-0.98.5/freshclam.conf | 224 +
recipes-security/clamav/clamav-0.98.5/series | 18 +
.../clamav/clamav-0.98.5/volatiles.03_clamav | 3 +
recipes-security/clamav/clamav_0.98.5.bb | 135 +
27 files changed, 63361 insertions(+)
create mode 100644 recipes-security/clamav/clamav-0.98.5/0001-Change-paths-in-sample-conf-file-to-match-Debian.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0002-Add-an-additional-n-after-the-number-in-the-pidfile.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0003-unit_tests-increment-test-timeout-from-40secs-to-5mi.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0004-Fix-compiling-on-Hurd.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0005-Workaround-a-bug-in-libc-on-Hurd.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0006-remove-unnecessary-harmful-flags-from-libclamav.pc.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0007-libclamav-use-libmspack.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0008-Add-upstream-systemd-support-for-clamav-daemon-and-c.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0009-fix-ssize_t-size_t-off_t-printf-modifier.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0010-hardcode-LLVM-linker-flag-because-llvm-config-return.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0011-Add-libmspack-library-from-upstream-without-unnecess.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0012-allow-to-use-internal-libmspack-if-the-external-is-n.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0013-fix-autoreconf-with-embedded-libmspack.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0014-remove-AC_CONFIG_SRCDIR-llvm-configure-from-libclama.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0015-bb-10731-Allow-to-specificy-a-group-for-the-socket-o.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0016-clamav-milter-add-additinal-SMFIF_-flags-before-invo.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0017-Bump-.so-version-number.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/0018-llvm-don-t-use-system-libs.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/clamav-0001-clamdscan.patch
create mode 100644 recipes-security/clamav/clamav-0.98.5/clamav-freshclam.service
create mode 100644 recipes-security/clamav/clamav-0.98.5/clamav-milter.conf.sample
create mode 100644 recipes-security/clamav/clamav-0.98.5/clamav.service
create mode 100644 recipes-security/clamav/clamav-0.98.5/clamd.conf
create mode 100644 recipes-security/clamav/clamav-0.98.5/freshclam.conf
create mode 100644 recipes-security/clamav/clamav-0.98.5/series
create mode 100644 recipes-security/clamav/clamav-0.98.5/volatiles.03_clamav
create mode 100644 recipes-security/clamav/clamav_0.98.5.bb
diff --git a/recipes-security/clamav/clamav-0.98.5/0001-Change-paths-in-sample-conf-file-to-match-Debian.patch b/recipes-security/clamav/clamav-0.98.5/0001-Change-paths-in-sample-conf-file-to-match-Debian.patch
new file mode 100644
index 0000000..afbd402
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0001-Change-paths-in-sample-conf-file-to-match-Debian.patch
@@ -0,0 +1,40 @@
+From a6d6189e25d0a1053dc1aaff1b4c71f84b4599cf Mon Sep 17 00:00:00 2001
+From: Scott Kitterman <scott at kitterman.com>
+Date: Mon, 10 Mar 2014 19:20:18 -0400
+Subject: Change paths in sample conf file to match Debian
+
+---
+ etc/clamav-milter.conf.sample | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/etc/clamav-milter.conf.sample b/etc/clamav-milter.conf.sample
+index b7d66a4f9641..ed0d519ffb9b 100644
+--- a/etc/clamav-milter.conf.sample
++++ b/etc/clamav-milter.conf.sample
+@@ -64,7 +64,7 @@ Example
+ # daemon (main thread).
+ #
+ # Default: disabled
+-#PidFile /var/run/clamav-milter.pid
++#PidFile /var/run/clamav/clamav-milter.pid
+
+ # Optional path to the global temporary directory.
+ # Default: system specific (usually /tmp or /var/tmp).
+@@ -90,7 +90,7 @@ Example
+ # with the same socket: clamd servers will be selected in a round-robin fashion.
+ #
+ # Default: no default
+-#ClamdSocket tcp:scanner.mydomain:7357
++ClamdSocket /var/run/clamav/clamd
+
+
+ ##
+@@ -212,7 +212,7 @@ Example
+ # A full path is required.
+ #
+ # Default: disabled
+-#LogFile /tmp/clamav-milter.log
++#LogFile /var/log/clamav/clamav-milter.log
+
+ # By default the log file is locked for writing - the lock protects against
+ # running clamav-milter multiple times.
diff --git a/recipes-security/clamav/clamav-0.98.5/0002-Add-an-additional-n-after-the-number-in-the-pidfile.patch b/recipes-security/clamav/clamav-0.98.5/0002-Add-an-additional-n-after-the-number-in-the-pidfile.patch
new file mode 100644
index 0000000..6055bd1
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0002-Add-an-additional-n-after-the-number-in-the-pidfile.patch
@@ -0,0 +1,56 @@
+From 3ae8ea99a010e5c513aa48c3bfa15a65772f742b Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Sat, 29 Mar 2014 15:52:55 +0100
+Subject: Add an additional \n after the number in the pidfile
+
+start-stop-daemon works without the \n in the file but pkill does not.
+Also the output of cat $PifFile looks better :)
+
+https://bugzilla.clamav.net/show_bug.cgi?id=10907
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ clamav-milter/clamav-milter.c | 2 +-
+ clamd/server-th.c | 2 +-
+ freshclam/freshclam.c | 2 +-
+ 3 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/clamav-milter/clamav-milter.c b/clamav-milter/clamav-milter.c
+index b6ac9e157872..2c7a4d7d3414 100644
+--- a/clamav-milter/clamav-milter.c
++++ b/clamav-milter/clamav-milter.c
+@@ -381,7 +381,7 @@ int main(int argc, char **argv) {
+ if((fd = fopen(opt->strarg, "w")) == NULL) {
+ logg("!Can't save PID in file %s\n", opt->strarg);
+ } else {
+- if (fprintf(fd, "%u", (unsigned int)getpid())<0) {
++ if (fprintf(fd, "%u\n", (unsigned int)getpid())<0) {
+ logg("!Can't save PID in file %s\n", opt->strarg);
+ }
+ fclose(fd);
+diff --git a/clamd/server-th.c b/clamd/server-th.c
+index 7ec5ae80cd64..d97cd6fb34e1 100644
+--- a/clamd/server-th.c
++++ b/clamd/server-th.c
+@@ -1034,7 +1034,7 @@ int recvloop_th(int *socketds, unsigned nsockets, struct cl_engine *engine, unsi
+ if((fd = fopen(opt->strarg, "w")) == NULL) {
+ logg("!Can't save PID in file %s\n", opt->strarg);
+ } else {
+- if (fprintf(fd, "%u", (unsigned int) mainpid)<0) {
++ if (fprintf(fd, "%u\n", (unsigned int) mainpid)<0) {
+ logg("!Can't save PID in file %s\n", opt->strarg);
+ }
+ fclose(fd);
+diff --git a/freshclam/freshclam.c b/freshclam/freshclam.c
+index 1a3279966720..166586bf6447 100644
+--- a/freshclam/freshclam.c
++++ b/freshclam/freshclam.c
+@@ -135,7 +135,7 @@ writepid (const char *pidfile)
+ }
+ else
+ {
+- fprintf (fd, "%d", (int) getpid ());
++ fprintf (fd, "%d\n", (int) getpid ());
+ fclose (fd);
+ }
+ umask (old_umask);
diff --git a/recipes-security/clamav/clamav-0.98.5/0003-unit_tests-increment-test-timeout-from-40secs-to-5mi.patch b/recipes-security/clamav/clamav-0.98.5/0003-unit_tests-increment-test-timeout-from-40secs-to-5mi.patch
new file mode 100644
index 0000000..3251278
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0003-unit_tests-increment-test-timeout-from-40secs-to-5mi.patch
@@ -0,0 +1,30 @@
+From d5febd3fab63a6dc4af148ab1b94fe8a85412b46 Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Fri, 25 Apr 2014 22:06:23 +0200
+Subject: unit_tests: increment test-timeout from 40secs to 5mins
+
+I see now and then that tests on the slower archs (arm*, mips) fail due to
+the timeout restriction. Often a second build even on the same buildd
+succeeds. I think that the buildd is either close to the limit or has
+something else (another sbuild running) going so it does not finish the
+test in 40secs.
+Therefore I raise the bar to a 5 minutes limit. The worst thing that can
+happen is, that it takes more than 4 minutes before an enless loop will
+be detected.
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ unit_tests/preload_run.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/unit_tests/preload_run.sh b/unit_tests/preload_run.sh
+index 8b8c8e3954dd..365b3a8e0edb 100755
+--- a/unit_tests/preload_run.sh
++++ b/unit_tests/preload_run.sh
+@@ -5,5 +5,5 @@
+ ulimit -c 0 || true
+ LD_PRELOAD=$LIBPRELOAD
+ export LD_PRELOAD
+-export CK_DEFAULT_TIMEOUT=40
++export CK_DEFAULT_TIMEOUT=300
+ exec $@
diff --git a/recipes-security/clamav/clamav-0.98.5/0004-Fix-compiling-on-Hurd.patch b/recipes-security/clamav/clamav-0.98.5/0004-Fix-compiling-on-Hurd.patch
new file mode 100644
index 0000000..de68367
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0004-Fix-compiling-on-Hurd.patch
@@ -0,0 +1,50 @@
+From db4079249ca4ead5821ce6e1d32edad84c2579aa Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Sat, 21 Jun 2014 17:00:47 +0200
+Subject: Fix compiling on Hurd.
+
+The header linux/sockios.h is not available on Hurd.
+---
+ libclamav/hostid.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/libclamav/hostid.c b/libclamav/hostid.c
+index bf988de2d6fd..e683539eaf41 100644
+--- a/libclamav/hostid.c
++++ b/libclamav/hostid.c
+@@ -47,7 +47,7 @@
+ #include <ifaddrs.h>
+ #endif
+
+-#if defined(SIOCGIFHWADDR)
++#if defined(SIOCGIFHWADDR) && !defined(__GNU__)
+ #if defined(_AIX)
+ #include <sys/ndd_var.h>
+ #include <sys/kinfo.h>
+@@ -116,7 +116,7 @@ struct device *get_devices(void)
+ uint8_t *mac;
+ int sock;
+
+-#if defined(SIOCGIFHWADDR)
++#if defined(SIOCGIFHWADDR) && !defined(__GNU__)
+ struct ifreq ifr;
+ #else
+ struct sockaddr_dl *sdl;
+@@ -155,7 +155,7 @@ struct device *get_devices(void)
+ * Instead, Linux uses its own ioctl. This code only runs if we're not Linux,
+ * Windows, or FreeBSD.
+ */
+-#if !defined(SIOCGIFHWADDR)
++#if !defined(SIOCGIFHWADDR) || defined(__GNU__)
+ for (i=0; i < ndevices; i++) {
+ if (!(strcmp(devices[i].name, addr->ifa_name))) {
+ sdl = (struct sockaddr_dl *)(addr->ifa_addr);
+@@ -180,7 +180,7 @@ struct device *get_devices(void)
+ }
+
+ /* This is the Linux version of getting the MAC addresses */
+-#if defined(SIOCGIFHWADDR)
++#if defined(SIOCGIFHWADDR) && !defined(__GNU__)
+ for (i=0; i < ndevices; i++) {
+ if (!(devices[i].name))
+ continue;
diff --git a/recipes-security/clamav/clamav-0.98.5/0005-Workaround-a-bug-in-libc-on-Hurd.patch b/recipes-security/clamav/clamav-0.98.5/0005-Workaround-a-bug-in-libc-on-Hurd.patch
new file mode 100644
index 0000000..c02d2b2
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0005-Workaround-a-bug-in-libc-on-Hurd.patch
@@ -0,0 +1,35 @@
+From b8e7d19ec50c30c59fa1038cd9da6d37c2176833 Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Sat, 21 Jun 2014 17:02:06 +0200
+Subject: Workaround a bug in libc on Hurd
+
+The send() function, when asked to send 0 characters, doesn't trigger a corresponding recv(), except on Hurd.
+
+This breaks the communication between clamd and clamdscan.
+
+See: https://bugs.debian.org/752237
+---
+ clamd/scanner.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/clamd/scanner.c b/clamd/scanner.c
+index cd3d07c4ad3e..d531c4420686 100644
+--- a/clamd/scanner.c
++++ b/clamd/scanner.c
+@@ -119,6 +119,7 @@ int scan_callback(STATBUF *sb, char *filename, const char *msg, enum cli_ftw_rea
+
+ /* detect disconnected socket,
+ * this should NOT detect half-shutdown sockets (SHUT_WR) */
++#if !defined(__GNU__)
+ if (send(scandata->conn->sd, &ret, 0, 0) == -1 && errno != EINTR) {
+ logg("$Client disconnected while command was active!\n");
+ thrmgr_group_terminate(scandata->conn->group);
+@@ -126,7 +127,7 @@ int scan_callback(STATBUF *sb, char *filename, const char *msg, enum cli_ftw_rea
+ free(filename);
+ return CL_BREAK;
+ }
+-
++#endif
+ if (thrmgr_group_need_terminate(scandata->conn->group)) {
+ logg("^Client disconnected while scanjob was active\n");
+ if (reason == visit_file)
diff --git a/recipes-security/clamav/clamav-0.98.5/0006-remove-unnecessary-harmful-flags-from-libclamav.pc.patch b/recipes-security/clamav/clamav-0.98.5/0006-remove-unnecessary-harmful-flags-from-libclamav.pc.patch
new file mode 100644
index 0000000..95ffd39
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0006-remove-unnecessary-harmful-flags-from-libclamav.pc.patch
@@ -0,0 +1,22 @@
+From 0fd50756af998fabc3393f67ff8b78a4855303d9 Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Mon, 4 Aug 2014 22:44:40 +0200
+Subject: remove unnecessary/harmful flags from libclamav.pc
+
+---
+ libclamav.pc.in | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/libclamav.pc.in b/libclamav.pc.in
+index 27db30e757ff..19ef1e4e0399 100644
+--- a/libclamav.pc.in
++++ b/libclamav.pc.in
+@@ -6,6 +6,6 @@ includedir=@includedir@
+ Name: libclamav
+ Description: A GPL virus scanner
+ Version: @PACKAGE_VERSION@
+-Libs: -L${libdir} -lclamav @LIBCLAMAV_LIBS@
+-Cflags: -I${includedir} @CFLAGS@
++Libs: -L${libdir} -lclamav
++Cflags: -I${includedir}
+
diff --git a/recipes-security/clamav/clamav-0.98.5/0007-libclamav-use-libmspack.patch b/recipes-security/clamav/clamav-0.98.5/0007-libclamav-use-libmspack.patch
new file mode 100644
index 0000000..83f30fb
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0007-libclamav-use-libmspack.patch
@@ -0,0 +1,4042 @@
+From bffbaabfbb139ef1596d8b20f0275293cecd9297 Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Wed, 30 Jul 2014 08:35:16 +0200
+Subject: libclamav: use libmspack
+
+This patch provides support for upstream / external libmspack version
+libmspack 0.4 (current). The old in-tree version of libmspack is removed
+while no loner used.
+
+BTS: #675558
+clamav: https://bugzilla.clamav.net/show_bug.cgi?id=11062
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ configure.ac | 3 +
+ libclamav/Makefile.am | 11 +-
+ libclamav/cab.c | 684 -----------------
+ libclamav/cab.h | 81 --
+ libclamav/chmunpack.h | 122 ---
+ libclamav/libmspack.c | 525 +++++++++++++
+ libclamav/libmspack.h | 7 +
+ libclamav/mspack.c | 2026 -------------------------------------------------
+ libclamav/mspack.h | 294 -------
+ libclamav/scanners.c | 146 +---
+ 10 files changed, 541 insertions(+), 3358 deletions(-)
+ delete mode 100644 libclamav/cab.c
+ delete mode 100644 libclamav/cab.h
+ delete mode 100644 libclamav/chmunpack.h
+ create mode 100644 libclamav/libmspack.c
+ create mode 100644 libclamav/libmspack.h
+ delete mode 100644 libclamav/mspack.c
+ delete mode 100644 libclamav/mspack.h
+
+diff --git a/configure.ac b/configure.ac
+index e230f939c2d3..41043753fc92 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -174,6 +174,9 @@ if test "$enable_llvm" = "yes" && test "$subdirfailed" != "no"; then
+ fi
+ AM_CONDITIONAL([ENABLE_LLVM],
+ [test "$subdirfailed" != "yes" && test "$enable_llvm" != "no"])
++
++PKG_CHECK_MODULES([LIBMSPACK], [libmspack])
++
+ no_recursion="yes";
+ AC_OUTPUT([libclamav/Makefile])
+
+diff --git a/libclamav/Makefile.am b/libclamav/Makefile.am
+index 1aab51bd6ccc..538e83dcdd03 100644
+--- a/libclamav/Makefile.am
++++ b/libclamav/Makefile.am
+@@ -147,6 +147,9 @@ if VERSIONSCRIPT
+ libclamav_la_LDFLAGS += -Wl, at VERSIONSCRIPTFLAG@, at top_srcdir@/libclamav/libclamav.map
+ endif
+
++libclamav_la_CFLAGS += $(LIBMSPACK_CFLAGS)
++libclamav_la_LDFLAGS += $(LIBMSPACK_LIBS)
++
+ include_HEADERS = clamav.h
+
+ libclamav_la_SOURCES = \
+@@ -204,8 +207,8 @@ libclamav_la_SOURCES = \
+ upx.h \
+ htmlnorm.c \
+ htmlnorm.h \
+- chmunpack.c \
+- chmunpack.h \
++ libmspack.c \
++ libmspack.h \
+ rebuildpe.c \
+ rebuildpe.h \
+ petite.c \
+@@ -283,10 +286,6 @@ libclamav_la_SOURCES = \
+ regex_list.h \
+ regex_suffix.c \
+ regex_suffix.h \
+- mspack.c \
+- mspack.h \
+- cab.c \
+- cab.h \
+ entconv.c \
+ entconv.h \
+ entitylist.h \
+diff --git a/libclamav/cab.c b/libclamav/cab.c
+deleted file mode 100644
+index 6d2eade7d4ea..000000000000
+--- a/libclamav/cab.c
++++ /dev/null
+@@ -1,684 +0,0 @@
+-/*
+- * Copyright (C) 2007-2008 Sourcefire, Inc.
+- *
+- * Authors: Tomasz Kojm
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+- * MA 02110-1301, USA.
+- */
+-
+-#if HAVE_CONFIG_H
+-#include "clamav-config.h"
+-#endif
+-
+-#include <stdio.h>
+-#include <string.h>
+-#include <ctype.h>
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-#ifdef HAVE_UNISTD_H
+-#include <unistd.h>
+-#endif
+-#include <fcntl.h>
+-
+-#include "clamav.h"
+-#include "cltypes.h"
+-#include "others.h"
+-#include "mspack.h"
+-#include "cab.h"
+-
+-#define EC32(x) cli_readint32(&x) /* Convert little endian to host */
+-#define EC16(x) cli_readint16(&x)
+-
+-/* hard limits */
+-#define CAB_FOLDER_LIMIT 5000
+-#define CAB_FILE_LIMIT 5000
+-
+-/* Cabinet format data structures */
+-
+-struct cab_hdr {
+- uint32_t signature; /* file signature */
+- uint32_t res1; /* reserved */
+- uint32_t cbCabinet; /* size of cabinet file */
+- uint32_t res2; /* reserved */
+- uint32_t coffFiles; /* offset of the first file entry */
+- uint32_t res3; /* reserved */
+- uint8_t versionMinor; /* file format version, minor */
+- uint8_t versionMajor; /* file format version, major */
+- uint16_t cFolders; /* number of folder entries */
+- uint16_t cFiles; /* number of file entries */
+- uint16_t flags; /* option flags */
+- uint16_t setID; /* multiple cabs related */
+- uint16_t iCabinet; /* multiple cabs related */
+-};
+-
+-struct cab_hdr_opt {
+- uint16_t cbCFHeader; /* size of reserved header area */
+- uint8_t cbCFFolder; /* size of reserved folder area */
+- uint8_t cbCFData; /* size of reserved block area */
+-};
+-
+-struct cab_folder_hdr
+-{
+- uint32_t coffCabStart; /* offset of the first data block */
+- uint16_t cCFData; /* number of data blocks */
+- uint16_t typeCompress; /* compression type */
+-};
+-
+-struct cab_file_hdr
+-{
+- uint32_t cbFile; /* uncompressed size */
+- uint32_t uoffFolderStart; /* uncompressed offset of file in folder */
+- uint16_t iFolder; /* folder index */
+- uint16_t date; /* date stamp */
+- uint16_t time; /* time stamp */
+- uint16_t attribs; /* attribute flags */
+-};
+-
+-struct cab_block_hdr
+-{
+- uint32_t csum; /* data block checksum */
+- uint16_t cbData; /* number of compressed bytes */
+- uint16_t cbUncomp; /* number of uncompressed bytes */
+-};
+-
+-static char *cab_readstr(fmap_t *map, off_t *offset, int *ret)
+-{
+- int i;
+- const char *str;
+- char *retstr;
+-
+- if(!(str = fmap_need_offstr(map, *offset, 256))) {
+- *ret = CL_EFORMAT;
+- return NULL;
+- }
+-
+- i = strlen(str) + 1;
+- if(i>=255) {
+- fmap_unneed_ptr(map, str, i);
+- *ret = CL_EFORMAT;
+- return NULL;
+- }
+-
+- *offset += i;
+- if((retstr = cli_malloc(i)))
+- memcpy(retstr, str, i);
+- fmap_unneed_ptr(map, str, i);
+-
+- if(!retstr) {
+- *ret = CL_EMEM;
+- return NULL;
+- }
+-
+- *ret = CL_SUCCESS;
+- return retstr;
+-}
+-
+-static int cab_chkname(char *name, int san)
+-{
+- size_t i, len = strlen(name);
+-
+-
+- for(i = 0; i < len; i++) {
+- if(!san && (strchr("%/*?|\\\"+=<>;:\t ", name[i]) || !isascii(name[i]))) {
+- cli_dbgmsg("cab_chkname: File name contains disallowed characters\n");
+- return 1;
+- } else if(san && !isalnum(name[i])) {
+- name[i] = '*';
+- }
+- }
+-
+- return 0;
+-}
+-
+-void cab_free(struct cab_archive *cab)
+-{
+- struct cab_folder *folder;
+- struct cab_file *file;
+-
+-
+- if(cab->state) {
+- if(cab->state->stream) {
+- switch(cab->state->cmethod & 0x000f) {
+- case 0x0001:
+- mszip_free(cab->state->stream);
+- break;
+- case 0x0002:
+- qtm_free(cab->state->stream);
+- break;
+- case 0x0003:
+- lzx_free(cab->state->stream);
+- }
+- }
+- free(cab->state);
+- }
+-
+- while(cab->folders) {
+- folder = cab->folders;
+- cab->folders = cab->folders->next;
+- free(folder);
+- }
+-
+- while(cab->files) {
+- file = cab->files;
+- cab->files = cab->files->next;
+- free(file->name);
+- free(file);
+- }
+-}
+-
+-int cab_open(fmap_t *map, off_t offset, struct cab_archive *cab)
+-{
+- unsigned int i, folders = 0;
+- struct cab_file *file, *lfile = NULL;
+- struct cab_folder *folder, *lfolder = NULL;
+- const struct cab_hdr *hdr;
+- const struct cab_hdr_opt *hdr_opt;
+- uint16_t fidx;
+- uint32_t coffFiles;
+- char *pt;
+- int ret;
+- off_t resfold = 0, rsize, cur_offset = offset;
+-
+- if(!(hdr=fmap_need_off_once(map, cur_offset, sizeof(*hdr)))) {
+- cli_dbgmsg("cab_open: Can't read cabinet header\n");
+- return CL_EFORMAT; /* most likely a corrupted file */
+- }
+- cur_offset += sizeof(*hdr);
+-
+- if(EC32(hdr->signature) != 0x4643534d) {
+- cli_dbgmsg("cab_open: Incorrect CAB signature\n");
+- return CL_EFORMAT;
+- } else {
+- cli_dbgmsg("CAB: -------------- Cabinet file ----------------\n");
+- }
+-
+- rsize = map->len;
+-
+- memset(cab, 0, sizeof(struct cab_archive));
+-
+- cab->length = EC32(hdr->cbCabinet);
+- cli_dbgmsg("CAB: Cabinet length: %u\n", cab->length);
+- if((off_t) cab->length > rsize) {
+- cli_dbgmsg("CAB: Truncating file size from %lu to %lu\n", (unsigned long int) cab->length, (unsigned long int) rsize);
+- cab->length = (uint32_t) rsize;
+- }
+-
+- cab->nfolders = EC16(hdr->cFolders);
+- if(!cab->nfolders) {
+- cli_dbgmsg("cab_open: No folders in cabinet (fake cab?)\n");
+- return CL_EFORMAT;
+- } else {
+- cli_dbgmsg("CAB: Folders: %u\n", cab->nfolders);
+- if(cab->nfolders > CAB_FOLDER_LIMIT) {
+- cab->nfolders = CAB_FOLDER_LIMIT;
+- cli_dbgmsg("CAB: *** Number of folders limited to %u ***\n", cab->nfolders);
+- }
+- }
+-
+- cab->nfiles = EC16(hdr->cFiles);
+- if(!cab->nfiles) {
+- cli_dbgmsg("cab_open: No files in cabinet (fake cab?)\n");
+- return CL_EFORMAT;
+- } else {
+- cli_dbgmsg("CAB: Files: %u\n", cab->nfiles);
+- if(cab->nfiles > CAB_FILE_LIMIT) {
+- cab->nfiles = CAB_FILE_LIMIT;
+- cli_dbgmsg("CAB: *** Number of files limited to %u ***\n", cab->nfiles);
+- }
+- }
+-
+- cli_dbgmsg("CAB: File format version: %u.%u\n", hdr->versionMajor, hdr->versionMinor);
+-
+- cab->flags = EC16(hdr->flags);
+- coffFiles = EC16(hdr->coffFiles);
+-
+- if(cab->flags & 0x0004) {
+- if(!(hdr_opt = fmap_need_off_once(map, cur_offset, sizeof(*hdr_opt)))) {
+- cli_dbgmsg("cab_open: Can't read file header (fake cab?)\n");
+- return CL_EFORMAT; /* most likely a corrupted file */
+- }
+-
+- cab->reshdr = EC16(hdr_opt->cbCFHeader);
+- resfold = hdr_opt->cbCFFolder;
+- cab->resdata = hdr_opt->cbCFData;
+-
+- cur_offset += sizeof(*hdr_opt) + cab->reshdr;
+- if(cab->reshdr) {
+- if(cab->reshdr >= rsize) {
+- cli_dbgmsg("cab_open: Can't lseek to %u (fake cab?)\n", cab->reshdr);
+- return CL_EFORMAT; /* most likely a corrupted file */
+- }
+- }
+- }
+-
+- if(cab->flags & 0x0001) { /* preceding cabinet */
+- /* name */
+- pt = cab_readstr(map, &cur_offset, &ret);
+- if(ret)
+- return ret;
+- if(cab_chkname(pt, 0))
+- cli_dbgmsg("CAB: Invalid name of preceding cabinet\n");
+- else
+- cli_dbgmsg("CAB: Preceding cabinet name: %s\n", pt);
+- free(pt);
+- /* info */
+- pt = cab_readstr(map, &cur_offset, &ret);
+- if(ret)
+- return ret;
+- if(cab_chkname(pt, 0))
+- cli_dbgmsg("CAB: Invalid info for preceding cabinet\n");
+- else
+- cli_dbgmsg("CAB: Preceding cabinet info: %s\n", pt);
+- free(pt);
+- }
+-
+- if(cab->flags & 0x0002) { /* next cabinet */
+- /* name */
+- pt = cab_readstr(map, &cur_offset, &ret);
+- if(ret)
+- return ret;
+- if(cab_chkname(pt, 0))
+- cli_dbgmsg("CAB: Invalid name of next cabinet\n");
+- else
+- cli_dbgmsg("CAB: Next cabinet name: %s\n", pt);
+- free(pt);
+- /* info */
+- pt = cab_readstr(map, &cur_offset, &ret);
+- if(ret)
+- return ret;
+- if(cab_chkname(pt, 0))
+- cli_dbgmsg("CAB: Invalid info for next cabinet\n");
+- else
+- cli_dbgmsg("CAB: Next cabinet info: %s\n", pt);
+- free(pt);
+- }
+-
+- /* folders */
+- for(i = 0; i < cab->nfolders; i++) {
+- const struct cab_folder_hdr *folder_hdr;
+-
+- if(!(folder_hdr = fmap_need_off_once(map, cur_offset, sizeof(*folder_hdr)))) {
+- cli_dbgmsg("cab_open: Can't read header for folder %u\n", i);
+- break;
+- }
+-
+- cur_offset += sizeof(*folder_hdr) + resfold;
+-
+- if(EC32(folder_hdr->coffCabStart) + offset > rsize) {
+- cli_dbgmsg("CAB: Folder out of file\n");
+- continue;
+- }
+-
+- if((EC16(folder_hdr->typeCompress) & 0x000f) > 3) {
+- cli_dbgmsg("CAB: Unknown compression method\n");
+- continue;
+- }
+-
+- folder = (struct cab_folder *) cli_calloc(1, sizeof(struct cab_folder));
+- if(!folder) {
+- cli_errmsg("cab_open: Can't allocate memory for folder\n");
+- cab_free(cab);
+- return CL_EMEM;
+- }
+-
+- folder->cab = (struct cab_archive *) cab;
+- folder->offset = (off_t) EC32(folder_hdr->coffCabStart) + offset;
+- folder->nblocks = EC16(folder_hdr->cCFData);
+- folder->cmethod = EC16(folder_hdr->typeCompress);
+-
+- cli_dbgmsg("CAB: Folder record %u\n", i);
+- cli_dbgmsg("CAB: Folder offset: %u\n", (unsigned int) folder->offset);
+- cli_dbgmsg("CAB: Folder compression method: %d\n", folder->cmethod);
+-
+- if(!lfolder)
+- cab->folders = folder;
+- else
+- lfolder->next = folder;
+-
+- lfolder = folder;
+- folders++;
+- }
+- cli_dbgmsg("CAB: Recorded folders: %u\n", folders);
+-
+- /* files */
+- if(cab->nfolders != folders) {
+- if(coffFiles >= rsize) {
+- cli_dbgmsg("cab_open: Can't lseek to hdr.coffFiles\n");
+- cab_free(cab);
+- return CL_EFORMAT;
+- }
+- cur_offset = coffFiles;
+- }
+- for(i = 0; i < cab->nfiles; i++) {
+- const struct cab_file_hdr *file_hdr;
+-
+- if(!(file_hdr = fmap_need_off_once(map, cur_offset, sizeof(*file_hdr)))) {
+- cli_dbgmsg("cab_open: Can't read file %u header\n", i);
+- break;
+- }
+- cur_offset += sizeof(*file_hdr);
+-
+- file = (struct cab_file *) cli_calloc(1, sizeof(struct cab_file));
+- if(!file) {
+- cli_errmsg("cab_open: Can't allocate memory for file\n");
+- cab_free(cab);
+- return CL_EMEM;
+- }
+-
+- file->cab = cab;
+- cab->map = map;
+- file->offset = EC32(file_hdr->uoffFolderStart);
+- file->length = EC32(file_hdr->cbFile);
+- file->attribs = EC16(file_hdr->attribs);
+- fidx = EC16(file_hdr->iFolder);
+- file->error = CL_SUCCESS;
+-
+- file->name = cab_readstr(map, &cur_offset, &ret);
+- if(ret) {
+- free(file);
+- continue;
+- }
+- cab_chkname(file->name, 1);
+-
+- cli_dbgmsg("CAB: File record %u\n", i);
+- cli_dbgmsg("CAB: File name: %s\n", file->name);
+- cli_dbgmsg("CAB: File offset: %u\n", (unsigned int) file->offset);
+- cli_dbgmsg("CAB: File folder index: %u\n", fidx);
+- cli_dbgmsg("CAB: File attribs: 0x%x\n", file->attribs);
+- if(file->attribs & 0x01)
+- cli_dbgmsg("CAB: * file is read-only\n");
+- if(file->attribs & 0x02)
+- cli_dbgmsg("CAB: * file is hidden\n");
+- if(file->attribs & 0x04)
+- cli_dbgmsg("CAB: * file is a system file\n");
+- if(file->attribs & 0x20)
+- cli_dbgmsg("CAB: * file modified since last backup\n");
+- if(file->attribs & 0x40)
+- cli_dbgmsg("CAB: * file to be run after extraction\n");
+- if(file->attribs & 0x80)
+- cli_dbgmsg("CAB: * file name contains UTF\n");
+-
+- /* folder index */
+- if(fidx < 0xfffd) {
+- if(fidx > cab->nfolders) {
+- cli_dbgmsg("cab_open: File %s is not associated with any folder\n", file->name);
+- free(file->name);
+- free(file);
+- continue;
+- }
+-
+- file->folder = cab->folders;
+- while(file->folder && fidx--)
+- file->folder = file->folder->next;
+-
+- if(!file->folder) {
+- cli_dbgmsg("cab_open: Folder not found for file %s\n", file->name);
+- free(file->name);
+- free(file);
+- continue;
+- }
+-
+- } else {
+- cli_dbgmsg("CAB: File is split *skipping*\n");
+- free(file->name);
+- free(file);
+- continue;
+- }
+-
+- if(!lfile)
+- cab->files = file;
+- else
+- lfile->next = file;
+-
+- lfile = file;
+-
+- }
+-
+- return CL_SUCCESS;
+-}
+-
+-static int cab_read_block(struct cab_file *file)
+-{
+- const struct cab_block_hdr *block_hdr;
+- struct cab_state *state = file->cab->state;
+-
+- if(!(block_hdr = fmap_need_off_once(file->cab->map, file->cab->cur_offset, sizeof(*block_hdr)))) {
+- cli_dbgmsg("cab_read_block: Can't read block header\n");
+- return CL_EFORMAT; /* most likely a corrupted file */
+- }
+-
+- file->cab->cur_offset += sizeof(*block_hdr) + file->cab->resdata;
+- state->blklen = EC16(block_hdr->cbData);
+- state->outlen = EC16(block_hdr->cbUncomp);
+-
+- if(fmap_readn(file->cab->map, state->block, file->cab->cur_offset, state->blklen) != state->blklen) {
+- cli_dbgmsg("cab_read_block: Can't read block data\n");
+- return CL_EFORMAT; /* most likely a corrupted file */
+- }
+-
+- file->cab->cur_offset += state->blklen;
+- state->pt = state->end = state->block;
+- state->end += state->blklen;
+-
+- return CL_SUCCESS;
+-}
+-
+-static int cab_read(struct cab_file *file, unsigned char *buffer, int bytes)
+-{
+- uint16_t todo, left;
+-
+-
+- if((file->cab->state->blknum > file->folder->nblocks) && !file->lread) {
+- file->error = CL_BREAK;
+- return -1;
+- }
+-
+- todo = bytes;
+- while(todo > 0) {
+- left = file->cab->state->end - file->cab->state->pt;
+-
+- if(left) {
+- if(left > todo)
+- left = todo;
+-
+- memcpy(buffer, file->cab->state->pt, left);
+- file->cab->state->pt += left;
+- buffer += left;
+- todo -= left;
+-
+- } else {
+- if(file->cab->state->blknum++ >= file->folder->nblocks)
+- break;
+-
+- file->error = cab_read_block(file);
+- if(file->error)
+- return -1;
+-
+- if((file->folder->cmethod & 0x000f) == 0x0002) /* Quantum hack */
+- *file->cab->state->end++ = 0xff;
+-
+- if(file->cab->state->blknum >= file->folder->nblocks) {
+- if((file->folder->cmethod & 0x000f) == 0x0003) { /* LZX hack */
+- lzx_set_output_length(file->cab->state->stream, (off_t) ((file->cab->state->blknum - 1) * 32768 + file->cab->state->outlen));
+- }
+- } else {
+- if(file->cab->state->outlen != 32768) {
+- cli_dbgmsg("cab_read: WARNING: partial data block\n");
+- }
+- }
+- }
+- }
+-
+- return file->lread = bytes - todo;
+-}
+-
+-static int cab_unstore(struct cab_file *file)
+-{
+- int todo, bread, bytes = file->length;
+- unsigned char buff[4096];
+-
+-
+- if(bytes < 0) {
+- cli_dbgmsg("cab_unstore: bytes < 0\n");
+- return CL_EFORMAT;
+- }
+-
+- todo = MIN((unsigned int) bytes, file->max_size);
+-
+- while(1) {
+-
+- if((unsigned int) todo <= sizeof(buff))
+- bread = todo;
+- else
+- bread = sizeof(buff);
+-
+- if((bread = cab_read(file, buff, bread)) == -1) {
+- cli_dbgmsg("cab_unstore: cab_read failed\n");
+- return file->error;
+- } else if(cli_writen(file->ofd, buff, bread) != bread) {
+- cli_warnmsg("cab_unstore: Can't write %d bytes to descriptor %d\n", bread, file->ofd);
+- return CL_EWRITE;
+- }
+-
+- todo -= bread;
+-
+- if(!bread || todo <= 0)
+- break;
+- }
+-
+- return CL_SUCCESS;
+-}
+-
+-#define CAB_CHGFOLDER \
+- if(!file->cab->actfol || (file->folder != file->cab->actfol) \
+- || (file->cab->state && file->cab->state->cmethod != file->folder->cmethod)) { \
+- if(file->cab->state) { \
+- if(file->cab->state->stream) { \
+- switch(file->cab->state->cmethod & 0x000f) { \
+- case 0x0001: \
+- mszip_free(file->cab->state->stream); \
+- break; \
+- case 0x0002: \
+- qtm_free(file->cab->state->stream); \
+- break; \
+- case 0x0003: \
+- lzx_free(file->cab->state->stream); \
+- } \
+- } \
+- free(file->cab->state); \
+- file->cab->state = NULL; \
+- } \
+- file->cab->cur_offset = file->folder->offset; \
+- file->cab->state = (struct cab_state *) cli_calloc(1, sizeof(struct cab_state)); \
+- if(!file->cab->state) { \
+- cli_errmsg("cab_extract: Can't allocate memory for internal state\n"); \
+- close(file->ofd); \
+- return CL_EMEM; \
+- } \
+- file->cab->state->cmethod = file->folder->cmethod; \
+- switch(file->folder->cmethod & 0x000f) { \
+- case 0x0001: \
+- file->cab->state->stream = (struct mszip_stream *) mszip_init(file->ofd, 4096, 1, file, &cab_read); \
+- break; \
+- case 0x0002: \
+- file->cab->state->stream = (struct qtm_stream *) qtm_init(file->ofd, (int) (file->folder->cmethod >> 8) & 0x1f, 4096, file, &cab_read); \
+- break; \
+- case 0x0003: \
+- file->cab->state->stream = (struct lzx_stream *) lzx_init(file->ofd, (int) (file->folder->cmethod >> 8) & 0x1f, 0, 4096, 0, file, &cab_read); \
+- } \
+- if((file->folder->cmethod & 0x000f) && !file->cab->state->stream) { \
+- close(file->ofd); \
+- return CL_EUNPACK; \
+- } \
+- file->cab->actfol = file->folder; \
+- } else { \
+- if(file->cab->state && file->cab->state->stream) { \
+- switch(file->cab->state->cmethod & 0x000f) { \
+- case 0x0001: \
+- ((struct mszip_stream *) file->cab->state->stream)->ofd = file->ofd; \
+- break; \
+- case 0x0002: \
+- ((struct qtm_stream *) file->cab->state->stream)->ofd = file->ofd; \
+- break; \
+- case 0x0003: \
+- ((struct lzx_stream *) file->cab->state->stream)->ofd = file->ofd; \
+- break; \
+- } \
+- } \
+- }
+-
+-
+-int cab_extract(struct cab_file *file, const char *name)
+-{
+- int ret;
+-
+-
+- if(!file || !name) {
+- cli_errmsg("cab_extract: !file || !name\n");
+- return CL_ENULLARG;
+- }
+-
+- if(!file->folder) {
+- cli_errmsg("cab_extract: file->folder == NULL\n");
+- return CL_ENULLARG;
+- }
+-
+- file->ofd = open(name, O_WRONLY|O_CREAT|O_TRUNC|O_BINARY, S_IRWXU);
+- if(file->ofd == -1) {
+- cli_errmsg("cab_extract: Can't open file %s in write mode\n", name);
+- return CL_ECREAT;
+- }
+-
+- switch(file->folder->cmethod & 0x000f) {
+- case 0x0000: /* STORE */
+- cli_dbgmsg("CAB: Compression method: STORED\n");
+- CAB_CHGFOLDER;
+- if(file->length > file->cab->length) {
+- cli_dbgmsg("cab_extract: Stored file larger than archive itself, trimming down\n");
+- file->length = file->cab->length;
+- }
+- ret = cab_unstore(file);
+- break;
+-
+- case 0x0001: /* MSZIP */
+- cli_dbgmsg("CAB: Compression method: MSZIP\n");
+- CAB_CHGFOLDER;
+- ret = mszip_decompress(file->cab->state->stream, file->length);
+- break;
+-
+- case 0x0002: /* QUANTUM */
+- cli_dbgmsg("CAB: Compression method: QUANTUM\n");
+- CAB_CHGFOLDER;
+- ret = qtm_decompress(file->cab->state->stream, file->length);
+- break;
+-
+- case 0x0003: /* LZX */
+- cli_dbgmsg("CAB: Compression method: LZX\n");
+- CAB_CHGFOLDER;
+- ret = lzx_decompress(file->cab->state->stream, file->length);
+- break;
+-
+- default:
+- cli_dbgmsg("CAB: Not supported compression method: 0x%x\n", file->folder->cmethod & 0x000f);
+- ret = CL_EFORMAT;
+- }
+-
+- close(file->ofd);
+-
+- if(ret == CL_BREAK)
+- ret = CL_SUCCESS;
+-
+- return ret;
+-}
+diff --git a/libclamav/cab.h b/libclamav/cab.h
+deleted file mode 100644
+index 795900d555e9..000000000000
+--- a/libclamav/cab.h
++++ /dev/null
+@@ -1,81 +0,0 @@
+-/*
+- * Copyright (C) 2007-2008 Sourcefire, Inc.
+- *
+- * Authors: Tomasz Kojm
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+- * MA 02110-1301, USA.
+- */
+-
+-#ifndef __CAB_H
+-#define __CAB_H
+-
+-#include <sys/types.h>
+-#include "cltypes.h"
+-#include "fmap.h"
+-
+-#define CAB_BLOCKMAX 65535
+-#define CAB_INPUTMAX (CAB_BLOCKMAX + 6144)
+-
+-struct cab_archive {
+- struct cab_folder *folders, *actfol;
+- struct cab_file *files;
+- struct cab_state *state;
+- fmap_t *map;
+- off_t cur_offset;
+- uint32_t length;
+- uint16_t nfolders;
+- uint16_t nfiles;
+- uint16_t flags;
+- uint16_t reshdr;
+- uint8_t resdata;
+-};
+-
+-struct cab_state {
+- unsigned char *pt, *end;
+- void *stream;
+- unsigned char block[CAB_INPUTMAX];
+- uint16_t blklen;
+- uint16_t outlen;
+- uint16_t blknum;
+- uint16_t cmethod;
+-};
+-
+-struct cab_file {
+- off_t offset;
+- char *name;
+- uint32_t length;
+- int error;
+- int lread;
+- int ofd;
+- struct cab_folder *folder;
+- struct cab_file *next;
+- struct cab_archive *cab;
+- uint16_t attribs;
+- uint64_t max_size, written_size;
+-};
+-
+-struct cab_folder {
+- struct cab_archive *cab;
+- off_t offset;
+- struct cab_folder *next;
+- uint16_t cmethod;
+- uint16_t nblocks;
+-};
+-
+-int cab_open(fmap_t *map, off_t offset, struct cab_archive *cab);
+-int cab_extract(struct cab_file *file, const char *name);
+-void cab_free(struct cab_archive *cab);
+-
+-#endif
+diff --git a/libclamav/chmunpack.h b/libclamav/chmunpack.h
+deleted file mode 100644
+index 7864386b921f..000000000000
+--- a/libclamav/chmunpack.h
++++ /dev/null
+@@ -1,122 +0,0 @@
+-/*
+- * Extract component parts of MS CHM files
+- *
+- * Copyright (C) 2007-2008 Sourcefire, Inc.
+- *
+- * Authors: Trog
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+- * MA 02110-1301, USA.
+- */
+-
+-#ifndef __CHM_UNPACK_H
+-#define __CHM_UNPACK_H
+-
+-#if HAVE_CONFIG_H
+-#include "clamav-config.h"
+-#endif
+-
+-#include "cltypes.h"
+-#include "others.h"
+-#include "fmap.h"
+-
+-#ifndef HAVE_ATTRIB_PACKED
+-#define __attribute__(x)
+-#endif
+-
+-#ifdef HAVE_PRAGMA_PACK
+-#pragma pack(1)
+-#endif
+-
+-#ifdef HAVE_PRAGMA_PACK_HPPA
+-#pragma pack 1
+-#endif
+-
+-#define CHM_ITSF_MIN_LEN (0x60)
+-typedef struct chm_itsf_header_tag
+-{
+- unsigned char signature[4];
+- int32_t version __attribute__ ((packed));
+- int32_t header_len __attribute__ ((packed));
+- uint32_t unknown __attribute__ ((packed));
+- uint32_t last_modified __attribute__ ((packed));
+- uint32_t lang_id __attribute__ ((packed));
+- unsigned char dir_clsid[16];
+- unsigned char stream_clsid[16];
+- uint64_t sec0_offset __attribute__ ((packed));
+- uint64_t sec0_len __attribute__ ((packed));
+- uint64_t dir_offset __attribute__ ((packed));
+- uint64_t dir_len __attribute__ ((packed));
+- uint64_t data_offset __attribute__ ((packed));
+-} chm_itsf_header_t;
+-
+-#define CHM_ITSP_LEN (0x54)
+-typedef struct chm_itsp_header_tag
+-{
+- unsigned char signature[4];
+- int32_t version __attribute__ ((packed));
+- int32_t header_len __attribute__ ((packed));
+- int32_t unknown1 __attribute__ ((packed));
+- uint32_t block_len __attribute__ ((packed));
+- int32_t blockidx_intvl __attribute__ ((packed));
+- int32_t index_depth __attribute__ ((packed));
+- int32_t index_root __attribute__ ((packed));
+- int32_t index_head __attribute__ ((packed));
+- int32_t index_tail __attribute__ ((packed));
+- int32_t unknown2 __attribute__ ((packed));
+- uint32_t num_blocks __attribute__ ((packed));
+- uint32_t lang_id __attribute__ ((packed));
+- unsigned char system_clsid[16];
+- unsigned char unknown4[16];
+-} chm_itsp_header_t;
+-
+-#ifdef HAVE_PRAGMA_PACK
+-#pragma pack()
+-#endif
+-
+-#ifdef HAVE_PRAGMA_PACK_HPPA
+-#pragma pack
+-#endif
+-
+-typedef struct chm_sys_entry_tag
+-{
+- uint64_t offset;
+- uint64_t length;
+-} chm_sys_entry_t;
+-
+-typedef struct chm_metadata_tag {
+- uint64_t file_length;
+- uint64_t file_offset;
+- chm_sys_entry_t sys_control;
+- chm_sys_entry_t sys_content;
+- chm_sys_entry_t sys_reset;
+- off_t m_length;
+- chm_itsf_header_t itsf_hdr;
+- chm_itsp_header_t itsp_hdr;
+- int ufd;
+- int ofd;
+- uint32_t num_chunks;
+- off_t chunk_offset;
+- const char *chunk_data;
+- const char *chunk_current;
+- const char *chunk_end;
+- fmap_t *map;
+- uint16_t chunk_entries;
+-} chm_metadata_t;
+-
+-int cli_chm_open(const char *dirname, chm_metadata_t *metadata, cli_ctx *ctx);
+-int cli_chm_prepare_file(chm_metadata_t *metadata);
+-int cli_chm_extract_file(char *dirname, chm_metadata_t *metadata, cli_ctx *ctx);
+-void cli_chm_close(chm_metadata_t *metadata);
+-#endif
+diff --git a/libclamav/libmspack.c b/libclamav/libmspack.c
+new file mode 100644
+index 000000000000..e94312e6dad3
+--- /dev/null
++++ b/libclamav/libmspack.c
+@@ -0,0 +1,525 @@
++/*
++ * Glue code for libmspack handling.
++ * Author: 웃 Sebastian Andrzej Siewior
++ * ✉ sebastian @ breakpoint ̣cc
++ */
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <sys/stat.h>
++#include <fcntl.h>
++
++#include <mspack.h>
++
++#include "clamav.h"
++#include "fmap.h"
++#include "scanners.h"
++#include "others.h"
++
++enum mspack_type {
++ FILETYPE_DUNNO,
++ FILETYPE_FMAP,
++ FILETYPE_FILENAME,
++};
++
++struct mspack_name {
++ fmap_t *fmap;
++ off_t org;
++};
++
++struct mspack_system_ex {
++ struct mspack_system ops;
++ off_t max_size;
++};
++
++struct mspack_handle {
++ enum mspack_type type;
++
++ fmap_t *fmap;
++ off_t org;
++ off_t offset;
++
++ FILE *f;
++ off_t max_size;
++};
++
++#define container_of(ptr, type, member) ({ \
++ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
++ (type *)( (char *)__mptr - offsetof(type,member) );})
++
++#define min_t(type, x, y) ({ \
++ type __min1 = (x); \
++ type __min2 = (y); \
++ __min1 < __min2 ? __min1: __min2; })
++
++static struct mspack_file *mspack_fmap_open(struct mspack_system *self,
++ const char *filename, int mode)
++{
++ struct mspack_name *mspack_name;
++ struct mspack_handle *mspack_handle;
++ struct mspack_system_ex *self_ex;
++ const char *fmode;
++
++ if (!filename) {
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ return NULL;
++ }
++ mspack_handle = malloc(sizeof(*mspack_handle));
++ if (!mspack_handle) {
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ return NULL;
++ }
++ switch (mode) {
++ case MSPACK_SYS_OPEN_READ:
++ mspack_handle->type = FILETYPE_FMAP;
++
++ mspack_name = (struct mspack_name *)filename;
++ mspack_handle->fmap = mspack_name->fmap;
++ mspack_handle->org = mspack_name->org;
++ mspack_handle->offset = 0;
++
++ return (struct mspack_file *)mspack_handle;
++
++ case MSPACK_SYS_OPEN_WRITE:
++ fmode = "wb";
++ break;
++ case MSPACK_SYS_OPEN_UPDATE:
++ fmode = "r+b";
++ break;
++ case MSPACK_SYS_OPEN_APPEND:
++ fmode = "ab";
++ break;
++ default:
++ cli_dbgmsg("%s() wrong mode\n", __func__);
++ goto out_err;
++ }
++
++ mspack_handle->type = FILETYPE_FILENAME;
++
++ mspack_handle->f = fopen(filename, fmode);
++ if (!mspack_handle->f) {
++ cli_dbgmsg("%s() failed %d\n", __func__, __LINE__);
++ goto out_err;
++ }
++ self_ex = container_of(self, struct mspack_system_ex, ops);
++ mspack_handle->max_size = self_ex->max_size;
++ return (struct mspack_file *)mspack_handle;
++
++out_err:
++ free(mspack_handle);
++ return NULL;
++}
++
++static void mspack_fmap_close(struct mspack_file *file)
++{
++ struct mspack_handle *mspack_handle = (struct mspack_handle *)file;
++
++ if (!mspack_handle)
++ return;
++
++ if (mspack_handle->type == FILETYPE_FILENAME)
++ fclose(mspack_handle->f);
++ free(mspack_handle);
++}
++
++static int mspack_fmap_read(struct mspack_file *file, void *buffer, int bytes)
++{
++ struct mspack_handle *mspack_handle = (struct mspack_handle *)file;
++ off_t offset;
++ size_t count;
++ int ret;
++
++ if (bytes < 0) {
++ cli_dbgmsg("%s() %d\n", __func__, __LINE__);
++ return -1;
++ }
++ if (!mspack_handle) {
++ cli_dbgmsg("%s() %d\n", __func__, __LINE__);
++ return -1;
++ }
++
++ if (mspack_handle->type == FILETYPE_FMAP) {
++ offset = mspack_handle->offset + mspack_handle->org;
++
++ ret = fmap_readn(mspack_handle->fmap, buffer, offset, bytes);
++ if (ret != bytes) {
++ cli_dbgmsg("%s() %d %d, %d\n", __func__, __LINE__, bytes, ret);
++ return ret;
++ }
++
++ mspack_handle->offset += bytes;
++ return bytes;
++ }
++ count = fread(buffer, bytes, 1, mspack_handle->f);
++ if (count < 1) {
++ cli_dbgmsg("%s() %d %d, %zd\n", __func__, __LINE__, bytes, count);
++ return -1;
++ }
++ return bytes;
++}
++
++static int mspack_fmap_write(struct mspack_file *file, void *buffer, int bytes)
++{
++ struct mspack_handle *mspack_handle = (struct mspack_handle *)file;
++ size_t count;
++ off_t max_size;
++
++ if (bytes < 0 || !mspack_handle) {
++ cli_dbgmsg("%s() err %d\n", __func__, __LINE__);
++ return -1;
++ }
++
++ if (mspack_handle->type == FILETYPE_FMAP) {
++ cli_dbgmsg("%s() err %d\n", __func__, __LINE__);
++ return -1;
++ }
++
++ if (!bytes)
++ return 0;
++
++ max_size = mspack_handle->max_size;
++ if (!max_size)
++ return bytes;
++
++ max_size = min_t(off_t, max_size, bytes);
++ mspack_handle->max_size -= max_size;
++
++ count = fwrite(buffer, max_size, 1, mspack_handle->f);
++ if (count < 1) {
++ cli_dbgmsg("%s() err %m <%zd %d>\n", __func__, count, bytes);
++ return -1;
++ }
++
++ return bytes;
++}
++
++static int mspack_fmap_seek(struct mspack_file *file, off_t offset, int mode)
++{
++ struct mspack_handle *mspack_handle = (struct mspack_handle *)file;
++
++ if (!mspack_handle) {
++ cli_dbgmsg("%s() err %d\n", __func__, __LINE__);
++ return -1;
++ }
++
++ if (mspack_handle->type == FILETYPE_FMAP) {
++ off_t new_pos;
++
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START:
++ new_pos = offset;
++ break;
++ case MSPACK_SYS_SEEK_CUR:
++ new_pos = mspack_handle->offset + offset;
++ break;
++ case MSPACK_SYS_SEEK_END:
++ new_pos = mspack_handle->fmap->len + offset;
++ break;
++ default:
++ cli_dbgmsg("%s() err %d\n", __func__, __LINE__);
++ return -1;
++ }
++ if (new_pos < 0 || new_pos > mspack_handle->fmap->len) {
++ cli_dbgmsg("%s() err %d\n", __func__, __LINE__);
++ return -1;
++ }
++
++ mspack_handle->offset = new_pos;
++ return 0;
++ }
++
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START:
++ mode = SEEK_SET;
++ break;
++ case MSPACK_SYS_SEEK_CUR:
++ mode = SEEK_CUR;
++ break;
++ case MSPACK_SYS_SEEK_END:
++ mode = SEEK_END;
++ break;
++ default:
++ cli_dbgmsg("%s() err %d\n", __func__, __LINE__);
++ return -1;
++ }
++
++ return fseeko(mspack_handle->f, offset, mode);
++}
++
++static off_t mspack_fmap_tell(struct mspack_file *file)
++{
++ struct mspack_handle *mspack_handle = (struct mspack_handle *)file;
++
++ if (!mspack_handle)
++ return -1;
++
++ if (mspack_handle->type == FILETYPE_FMAP)
++ return mspack_handle->offset;
++
++ return ftello(mspack_handle->f);
++}
++
++static void mspack_fmap_message(struct mspack_file *file, const char *fmt, ...)
++{
++ cli_dbgmsg("%s() %s\n", __func__, fmt);
++}
++static void *mspack_fmap_alloc(struct mspack_system *self, size_t num)
++{
++ return malloc(num);
++}
++
++static void mspack_fmap_free(void *mem)
++{
++ free(mem);
++}
++
++static void mspack_fmap_copy(void *src, void *dst, size_t num)
++{
++ memcpy(dst, src, num);
++}
++
++static struct mspack_system mspack_sys_fmap_ops = {
++ .open = mspack_fmap_open,
++ .close = mspack_fmap_close,
++ .read = mspack_fmap_read,
++ .write = mspack_fmap_write,
++ .seek = mspack_fmap_seek,
++ .tell = mspack_fmap_tell,
++ .message = mspack_fmap_message,
++ .alloc = mspack_fmap_alloc,
++ .free = mspack_fmap_free,
++ .copy = mspack_fmap_copy,
++};
++
++static int cli_scanfile(const char *filename, cli_ctx *ctx)
++{
++ int fd, ret;
++
++ /* internal version of cl_scanfile with arec/mrec preserved */
++ fd = safe_open(filename, O_RDONLY|O_BINARY);
++ if (fd < 0)
++ return CL_EOPEN;
++
++ ret = cli_magic_scandesc(fd, ctx);
++
++ close(fd);
++ return ret;
++}
++
++int cli_scanmscab(cli_ctx *ctx, off_t sfx_offset)
++{
++ struct mscab_decompressor *cab_d;
++ struct mscabd_cabinet *cab_h;
++ struct mscabd_file *cab_f;
++ int ret;
++ int files;
++ int virus_num = 0;
++ struct mspack_name mspack_fmap = {
++ .fmap = *ctx->fmap,
++ .org = sfx_offset,
++ };
++ struct mspack_system_ex ops_ex = {
++ .ops = mspack_sys_fmap_ops,
++ };
++
++ MSPACK_SYS_SELFTEST(ret);
++ if (ret) {
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ return CL_EUNPACK;
++ }
++
++ cab_d = mspack_create_cab_decompressor(&ops_ex.ops);
++ if (!cab_d) {
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ return CL_EUNPACK;
++ }
++
++ cab_h = cab_d->open(cab_d, (char *)&mspack_fmap);
++ if (!cab_h) {
++ ret = CL_EFORMAT;
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ goto out_dest;
++ }
++ files = 0;
++ for (cab_f = cab_h->files; cab_f; cab_f = cab_f->next) {
++ off_t max_size;
++ char *tmp_fname;
++
++ ret = cli_matchmeta(ctx, cab_f->filename, 0, cab_f->length, 0,
++ files, 0, NULL);
++ if (ret) {
++ if (ret == CL_VIRUS) {
++ virus_num++;
++ if (!SCAN_ALL)
++ break;
++ }
++ goto out_close;
++ }
++
++ if (ctx->engine->maxscansize) {
++ if (ctx->scansize >= ctx->engine->maxscansize) {
++ ret = CL_CLEAN;
++ break;
++ }
++ }
++
++ if (ctx->engine->maxscansize &&
++ ctx->scansize + ctx->engine->maxfilesize >=
++ ctx->engine->maxscansize)
++ max_size = ctx->engine->maxscansize -
++ ctx->scansize;
++ else
++ max_size = ctx->engine->maxfilesize ?
++ ctx->engine->maxfilesize :
++ 0xffffffff;
++
++ tmp_fname = cli_gentemp(ctx->engine->tmpdir);
++ if (!tmp_fname) {
++ ret = CL_EMEM;
++ break;
++ }
++
++ ops_ex.max_size = max_size;
++ /* scan */
++ ret = cab_d->extract(cab_d, cab_f, tmp_fname);
++ if (ret) {
++ /* Failed to extract */
++ cli_dbgmsg("%s() failed to extract %d\n", __func__, ret);
++ } else {
++ ret = cli_scanfile(tmp_fname, ctx);
++ if (ret == CL_VIRUS)
++ virus_num++;
++ }
++ if (!ctx->engine->keeptmp) {
++ if (!access(tmp_fname, R_OK) && cli_unlink(tmp_fname)) {
++ free(tmp_fname);
++ ret = CL_EUNLINK;
++ break;
++ }
++ }
++ free(tmp_fname);
++ files++;
++ if (ret == CL_VIRUS && SCAN_ALL)
++ continue;
++ if (ret)
++ break;
++ }
++
++out_close:
++ cab_d->close(cab_d, cab_h);
++out_dest:
++ mspack_destroy_cab_decompressor(cab_d);
++ if (virus_num)
++ return CL_VIRUS;
++ return ret;
++}
++
++int cli_scanmschm(cli_ctx *ctx)
++{
++ struct mschm_decompressor *mschm_d;
++ struct mschmd_header *mschm_h;
++ struct mschmd_file *mschm_f;
++ int ret;
++ int files;
++ int virus_num = 0;
++ struct mspack_name mspack_fmap = {
++ .fmap = *ctx->fmap,
++ };
++ struct mspack_system_ex ops_ex = {
++ .ops = mspack_sys_fmap_ops,
++ };
++
++ MSPACK_SYS_SELFTEST(ret);
++ if (ret) {
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ return CL_EUNPACK;
++ }
++
++ mschm_d = mspack_create_chm_decompressor(&ops_ex.ops);
++ if (!mschm_d) {
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ return CL_EUNPACK;
++ }
++
++ mschm_h = mschm_d->open(mschm_d, (char *)&mspack_fmap);
++ if (!mschm_h) {
++ ret = CL_EFORMAT;
++ cli_dbgmsg("%s() failed at %d\n", __func__, __LINE__);
++ goto out_dest;
++ }
++ files = 0;
++ for (mschm_f = mschm_h->files; mschm_f; mschm_f = mschm_f->next) {
++ off_t max_size;
++ char *tmp_fname;
++
++ ret = cli_matchmeta(ctx, mschm_f->filename, 0, mschm_f->length,
++ 0, files, 0, NULL);
++ if (ret) {
++ if (ret == CL_VIRUS) {
++ virus_num++;
++ if (!SCAN_ALL)
++ break;
++ }
++ goto out_close;
++ }
++
++ if (ctx->engine->maxscansize) {
++ if (ctx->scansize >= ctx->engine->maxscansize) {
++ ret = CL_CLEAN;
++ break;
++ }
++ }
++
++ if (ctx->engine->maxscansize &&
++ ctx->scansize + ctx->engine->maxfilesize >=
++ ctx->engine->maxscansize)
++ max_size = ctx->engine->maxscansize -
++ ctx->scansize;
++ else
++ max_size = ctx->engine->maxfilesize ?
++ ctx->engine->maxfilesize :
++ 0xffffffff;
++
++ ops_ex.max_size = max_size;
++
++ tmp_fname = cli_gentemp(ctx->engine->tmpdir);
++ if (!tmp_fname) {
++ ret = CL_EMEM;
++ break;
++ }
++
++ /* scan */
++ ret = mschm_d->extract(mschm_d, mschm_f, tmp_fname);
++ if (ret) {
++ /* Failed to extract */
++ cli_dbgmsg("%s() failed to extract %d\n", __func__, ret);
++ } else {
++ ret = cli_scanfile(tmp_fname, ctx);
++ if (ret == CL_VIRUS)
++ virus_num++;
++ }
++ if (!ctx->engine->keeptmp) {
++ if (!access(tmp_fname, R_OK) && cli_unlink(tmp_fname)) {
++ free(tmp_fname);
++ ret = CL_EUNLINK;
++ break;
++ }
++ }
++ free(tmp_fname);
++ files++;
++ if (ret == CL_VIRUS && SCAN_ALL)
++ continue;
++ if (ret)
++ break;
++ }
++
++out_close:
++ mschm_d->close(mschm_d, mschm_h);
++out_dest:
++ mspack_destroy_chm_decompressor(mschm_d);
++ if (virus_num)
++ return CL_VIRUS;
++ return ret;
++
++ return 0;
++}
+diff --git a/libclamav/libmspack.h b/libclamav/libmspack.h
+new file mode 100644
+index 000000000000..07a9442bf253
+--- /dev/null
++++ b/libclamav/libmspack.h
+@@ -0,0 +1,7 @@
++#ifndef __LIBMSPACK_H__
++#define __LIBMSPACK_H__
++
++int cli_scanmscab(cli_ctx *ctx, off_t sfx_offset);
++int cli_scanmschm(cli_ctx *ctx);
++
++#endif
+diff --git a/libclamav/mspack.c b/libclamav/mspack.c
+deleted file mode 100644
+index cc4c0a59fc9a..000000000000
+--- a/libclamav/mspack.c
++++ /dev/null
+@@ -1,2026 +0,0 @@
+-/*
+- * This file includes code from libmspack adapted for libclamav by
+- * tkojm at clamav.net and draynor at sourcefire.com
+- *
+- * Copyright (C) 2003-2004 Stuart Caie
+- *
+- * This library is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU Lesser General Public
+- * License version 2.1 as published by the Free Software Foundation.
+- *
+- * This library is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+- * Lesser General Public License for more details.
+- *
+- * You should have received a copy of the GNU Lesser General Public
+- * License along with this library; if not, write to the Free Software
+- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
+- * USA
+- */
+-
+-#if HAVE_CONFIG_H
+-#include "clamav-config.h"
+-#endif
+-
+-#include <stdio.h>
+-#include <string.h>
+-
+-#include "others.h"
+-#include "clamav.h"
+-#include "mspack.h"
+-
+-#if HAVE_LIMITS_H
+-# include <limits.h>
+-#endif
+-#ifndef CHAR_BIT
+-# define CHAR_BIT (8)
+-#endif
+-
+-
+-/***************************************************************************
+- * MS-ZIP decompression implementation
+- ***************************************************************************
+- * The LZX method was created by Jonathan Forbes and Tomi Poutanen, adapted
+- * by Microsoft Corporation.
+- *
+- * The deflate method was created by Phil Katz. MSZIP is equivalent to the
+- * deflate method.
+- *
+- */
+-
+-/* match lengths for literal codes 257.. 285 */
+-static const unsigned short mszip_lit_lengths[29] = {
+- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27,
+- 31, 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258
+-};
+-
+-/* match offsets for distance codes 0 .. 29 */
+-static const unsigned short mszip_dist_offsets[30] = {
+- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385,
+- 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577
+-};
+-
+-/* extra bits required for literal codes 257.. 285 */
+-static const unsigned char mszip_lit_extrabits[29] = {
+- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2,
+- 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0
+-};
+-
+-/* extra bits required for distance codes 0 .. 29 */
+-static const unsigned char mszip_dist_extrabits[30] = {
+- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6,
+- 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13
+-};
+-
+-/* the order of the bit length Huffman code lengths */
+-static const unsigned char mszip_bitlen_order[19] = {
+- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
+-};
+-
+-/* ANDing with mszip_bit_mask[n] masks the lower n bits */
+-static const unsigned short mszip_bit_mask_tab[17] = {
+- 0x0000, 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+-};
+-
+-#define MSZIP_STORE_BITS do { \
+- zip->i_ptr = i_ptr; \
+- zip->i_end = i_end; \
+- zip->bit_buffer = bit_buffer; \
+- zip->bits_left = bits_left; \
+-} while (0)
+-
+-#define MSZIP_RESTORE_BITS do { \
+- i_ptr = zip->i_ptr; \
+- i_end = zip->i_end; \
+- bit_buffer = zip->bit_buffer; \
+- bits_left = zip->bits_left; \
+-} while (0)
+-
+-#define MSZIP_ENSURE_BITS(nbits) do { \
+- while (bits_left < (nbits)) { \
+- if (i_ptr >= i_end) { \
+- if (mszip_read_input(zip)) return zip->error; \
+- i_ptr = zip->i_ptr; \
+- i_end = zip->i_end; \
+- if(i_ptr == i_end) break; \
+- } \
+- bit_buffer |= *i_ptr++ << bits_left; bits_left += 8; \
+- } \
+-} while (0)
+-
+-#define MSZIP_PEEK_BITS(nbits) (bit_buffer & ((1<<(nbits))-1))
+-#define MSZIP_PEEK_BITS_T(nbits) (bit_buffer & mszip_bit_mask_tab[(nbits)])
+-
+-#define MSZIP_REMOVE_BITS(nbits) ((bit_buffer >>= (nbits)), (bits_left -= (nbits)))
+-
+-#define MSZIP_READ_BITS(val, nbits) do { \
+- MSZIP_ENSURE_BITS(nbits); (val) = MSZIP_PEEK_BITS(nbits); MSZIP_REMOVE_BITS(nbits); \
+-} while (0)
+-
+-#define MSZIP_READ_BITS_T(val, nbits) do { \
+- MSZIP_ENSURE_BITS(nbits); (val) = MSZIP_PEEK_BITS_T(nbits); MSZIP_REMOVE_BITS(nbits); \
+-} while (0)
+-
+-static int mszip_read_input(struct mszip_stream *zip) {
+- int nread = zip->read_cb(zip->file, zip->inbuf, (int)zip->inbuf_size);
+- if (nread < 0) {
+- if (zip->file->error == CL_BREAK) {
+- if ((unsigned int)nread == zip->last) {
+- cli_dbgmsg("mszip_read_input: Two consecutive CL_BREAKs reached.\n");
+- return CL_BREAK;
+- }
+- // Need short circuit to ensure scanning small files
+- cli_dbgmsg("mszip_read_input: First CL_BREAK reached.\n");
+- zip->i_ptr = zip->i_end;
+- zip->last = nread;
+- return CL_SUCCESS;
+- }
+- else
+- return zip->error = CL_EFORMAT;
+- }
+-
+- zip->last = nread;
+- zip->i_ptr = &zip->inbuf[0];
+- zip->i_end = &zip->inbuf[nread];
+-
+- return CL_SUCCESS;
+-}
+-
+-/* inflate() error codes */
+-#define INF_ERR_BLOCKTYPE (-1) /* unknown block type */
+-#define INF_ERR_COMPLEMENT (-2) /* block size complement mismatch */
+-#define INF_ERR_FLUSH (-3) /* error from flush_window() callback */
+-#define INF_ERR_BITBUF (-4) /* too many bits in bit buffer */
+-#define INF_ERR_SYMLENS (-5) /* too many symbols in blocktype 2 header */
+-#define INF_ERR_BITLENTBL (-6) /* failed to build bitlens huffman table */
+-#define INF_ERR_LITERALTBL (-7) /* failed to build literals huffman table */
+-#define INF_ERR_DISTANCETBL (-8) /* failed to build distance huffman table */
+-#define INF_ERR_BITOVERRUN (-9) /* bitlen RLE code goes over table size */
+-#define INF_ERR_BADBITLEN (-10) /* invalid bit-length code */
+-#define INF_ERR_LITCODE (-11) /* out-of-range literal code */
+-#define INF_ERR_DISTCODE (-12) /* out-of-range distance code */
+-#define INF_ERR_DISTANCE (-13) /* somehow, distance is beyond 32k */
+-#define INF_ERR_HUFFSYM (-14) /* out of bits decoding huffman symbol */
+-
+-/* mszip_make_decode_table(nsyms, nbits, length[], table[])
+- *
+- * This function was coded by David Tritscher. It builds a fast huffman
+- * decoding table out of just a canonical huffman code lengths table.
+- *
+- * NOTE: this is NOT identical to the mszip_make_decode_table() in lzxd.c. This
+- * one reverses the quick-lookup bit pattern. Bits are read MSB to LSB in LZX,
+- * but LSB to MSB in MSZIP.
+- *
+- * nsyms = total number of symbols in this huffman tree.
+- * nbits = any symbols with a code length of nbits or less can be decoded
+- * in one lookup of the table.
+- * length = A table to get code lengths from [0 to nsyms-1]
+- * table = The table to fill up with decoded symbols and pointers.
+- *
+- * Returns 0 for OK or 1 for error
+- */
+-static int mszip_make_decode_table(unsigned int nsyms, unsigned int nbits,
+- unsigned char *length, unsigned short *table)
+-{
+- register unsigned int leaf, reverse, fill;
+- register unsigned short sym, next_sym;
+- register unsigned char bit_num;
+- unsigned int pos = 0; /* the current position in the decode table */
+- unsigned int table_mask = 1 << nbits;
+- unsigned int mszip_bit_mask = table_mask >> 1; /* don't do 0 length codes */
+-
+- /* fill entries for codes short enough for a direct mapping */
+- for (bit_num = 1; bit_num <= nbits; bit_num++) {
+- for (sym = 0; sym < nsyms; sym++) {
+- if (length[sym] != bit_num) continue;
+-
+- /* reverse the significant bits */
+- fill = length[sym]; reverse = pos >> (nbits - fill); leaf = 0;
+- do {leaf <<= 1; leaf |= reverse & 1; reverse >>= 1;} while (--fill);
+-
+- if((pos += mszip_bit_mask) > table_mask) return 1; /* table overrun */
+-
+- /* fill all possible lookups of this symbol with the symbol itself */
+- fill = mszip_bit_mask; next_sym = 1 << bit_num;
+- do { table[leaf] = sym; leaf += next_sym; } while (--fill);
+- }
+- mszip_bit_mask >>= 1;
+- }
+-
+- /* exit with success if table is now complete */
+- if (pos == table_mask) return 0;
+-
+- /* mark all remaining table entries as unused */
+- for (sym = pos; sym < table_mask; sym++) {
+- reverse = sym; leaf = 0; fill = nbits;
+- do { leaf <<= 1; leaf |= reverse & 1; reverse >>= 1; } while (--fill);
+- table[leaf] = 0xFFFF;
+- }
+-
+- /* where should the longer codes be allocated from? */
+- next_sym = ((table_mask >> 1) < nsyms) ? nsyms : (table_mask >> 1);
+-
+- /* give ourselves room for codes to grow by up to 16 more bits.
+- * codes now start at bit nbits+16 and end at (nbits+16-codelength) */
+- pos <<= 16;
+- table_mask <<= 16;
+- mszip_bit_mask = 1 << 15;
+-
+- for (bit_num = nbits+1; bit_num <= MSZIP_MAX_HUFFBITS; bit_num++) {
+- for (sym = 0; sym < nsyms; sym++) {
+- if (length[sym] != bit_num) continue;
+-
+- /* leaf = the first nbits of the code, reversed */
+- reverse = pos >> 16; leaf = 0; fill = nbits;
+- do {leaf <<= 1; leaf |= reverse & 1; reverse >>= 1;} while (--fill);
+-
+- for (fill = 0; fill < (bit_num - nbits); fill++) {
+- /* if this path hasn't been taken yet, 'allocate' two entries */
+- if (table[leaf] == 0xFFFF) {
+- table[(next_sym << 1) ] = 0xFFFF;
+- table[(next_sym << 1) + 1 ] = 0xFFFF;
+- table[leaf] = next_sym++;
+- }
+- /* follow the path and select either left or right for next bit */
+- leaf = (table[leaf] << 1) | ((pos >> (15 - fill)) & 1);
+- }
+- table[leaf] = sym;
+-
+- if ((pos += mszip_bit_mask) > table_mask) return 1; /* table overflow */
+- }
+- mszip_bit_mask >>= 1;
+- }
+-
+- /* full table? */
+- return (pos != table_mask) ? 1 : 0;
+-}
+-
+-/* MSZIP_READ_HUFFSYM(tablename, var) decodes one huffman symbol from the
+- * bitstream using the stated table and puts it in var.
+- */
+-#define MSZIP_READ_HUFFSYM(tbl, var) do { \
+- /* huffman symbols can be up to 16 bits long */ \
+- MSZIP_ENSURE_BITS(MSZIP_MAX_HUFFBITS); \
+- /* immediate table lookup of [tablebits] bits of the code */ \
+- sym = zip->tbl##_table[MSZIP_PEEK_BITS(MSZIP_##tbl##_TABLEBITS)]; \
+- /* is the symbol is longer than [tablebits] bits? (i=node index) */ \
+- if (sym >= MSZIP_##tbl##_MAXSYMBOLS) { \
+- /* decode remaining bits by tree traversal */ \
+- i = MSZIP_##tbl##_TABLEBITS - 1; \
+- do { \
+- /* check next bit. error if we run out of bits before decode */ \
+- if (i++ > MSZIP_MAX_HUFFBITS) { \
+- cli_dbgmsg("zip_inflate: out of bits in huffman decode\n"); \
+- return INF_ERR_HUFFSYM; \
+- } \
+- sym = (sym << 1) | ((bit_buffer >> i) & 1); \
+- if(sym >= MSZIP_##tbl##_TABLESIZE) { \
+- cli_dbgmsg("zip_inflate: index out of table\n"); \
+- return INF_ERR_HUFFSYM; \
+- } \
+- /* double node index and add 0 (left branch) or 1 (right) */ \
+- sym = zip->tbl##_table[sym]; \
+- /* while we are still in node indicies, not decoded symbols */ \
+- } while (sym >= MSZIP_##tbl##_MAXSYMBOLS); \
+- } \
+- /* result */ \
+- (var) = sym; \
+- /* look up the code length of that symbol and discard those bits */ \
+- i = zip->tbl##_len[sym]; \
+- MSZIP_REMOVE_BITS(i); \
+-} while (0)
+-
+-static int mszip_read_lens(struct mszip_stream *zip) {
+- /* for the bit buffer and huffman decoding */
+- register unsigned int bit_buffer;
+- register int bits_left;
+- unsigned char *i_ptr, *i_end;
+-
+- /* bitlen Huffman codes -- immediate lookup, 7 bit max code length */
+- unsigned short bl_table[(1 << 7)];
+- unsigned char bl_len[19];
+-
+- unsigned char lens[MSZIP_LITERAL_MAXSYMBOLS + MSZIP_DISTANCE_MAXSYMBOLS];
+- unsigned int lit_codes, dist_codes, code, last_code=0, bitlen_codes, i, run;
+-
+- MSZIP_RESTORE_BITS;
+-
+- /* read the number of codes */
+- MSZIP_READ_BITS(lit_codes, 5); lit_codes += 257;
+- MSZIP_READ_BITS(dist_codes, 5); dist_codes += 1;
+- MSZIP_READ_BITS(bitlen_codes, 4); bitlen_codes += 4;
+- if (lit_codes > MSZIP_LITERAL_MAXSYMBOLS) return INF_ERR_SYMLENS;
+- if (dist_codes > MSZIP_DISTANCE_MAXSYMBOLS) return INF_ERR_SYMLENS;
+-
+- /* read in the bit lengths in their unusual order */
+- for (i = 0; i < bitlen_codes; i++) MSZIP_READ_BITS(bl_len[mszip_bitlen_order[i]], 3);
+- while (i < 19) bl_len[mszip_bitlen_order[i++]] = 0;
+-
+- /* create decoding table with an immediate lookup */
+- if (mszip_make_decode_table(19, 7, &bl_len[0], &bl_table[0])) {
+- return INF_ERR_BITLENTBL;
+- }
+-
+- /* read literal / distance code lengths */
+- for (i = 0; i < (lit_codes + dist_codes); i++) {
+- /* single-level huffman lookup */
+- MSZIP_ENSURE_BITS(7);
+- code = bl_table[MSZIP_PEEK_BITS(7)];
+- MSZIP_REMOVE_BITS(bl_len[code]);
+-
+- if (code < 16) lens[i] = last_code = code;
+- else {
+- switch (code) {
+- case 16: MSZIP_READ_BITS(run, 2); run += 3; code = last_code; break;
+- case 17: MSZIP_READ_BITS(run, 3); run += 3; code = 0; break;
+- case 18: MSZIP_READ_BITS(run, 7); run += 11; code = 0; break;
+- default: cli_dbgmsg("zip_read_lens: bad code!: %u\n", code); return INF_ERR_BADBITLEN;
+- }
+- if ((i + run) > (lit_codes + dist_codes)) return INF_ERR_BITOVERRUN;
+- while (run--) lens[i++] = code;
+- i--;
+- }
+- }
+-
+- /* copy LITERAL code lengths and clear any remaining */
+- i = lit_codes;
+- memcpy(&zip->LITERAL_len[0], &lens[0], i);
+- while (i < MSZIP_LITERAL_MAXSYMBOLS) zip->LITERAL_len[i++] = 0;
+-
+- i = dist_codes;
+- memcpy(&zip->DISTANCE_len[0], &lens[lit_codes], i);
+- while (i < MSZIP_DISTANCE_MAXSYMBOLS) zip->DISTANCE_len[i++] = 0;
+-
+- MSZIP_STORE_BITS;
+- return 0;
+-}
+-
+-static int mspack_write(int fd, const void *buff, unsigned int count, struct cab_file *file)
+-{
+- int ret;
+-
+- if(file->max_size) {
+- if(file->written_size >= file->max_size)
+- return CL_BREAK;
+-
+- if(file->written_size + count > file->max_size)
+- count = file->max_size - file->written_size;
+- }
+- if((ret = cli_writen(fd, buff, count)) > 0)
+- file->written_size += ret;
+-
+- return (ret == -1) ? CL_EWRITE : CL_SUCCESS;
+-}
+-
+-/* a clean implementation of RFC 1951 / inflate */
+-static int mszip_inflate(struct mszip_stream *zip) {
+- unsigned int last_block, block_type, distance, length, this_run, i;
+-
+- /* for the bit buffer and huffman decoding */
+- register unsigned int bit_buffer;
+- register int bits_left;
+- register unsigned short sym;
+- unsigned char *i_ptr, *i_end;
+-
+- MSZIP_RESTORE_BITS;
+-
+- do {
+- /* read in last block bit */
+- MSZIP_READ_BITS(last_block, 1);
+-
+- /* read in block type */
+- MSZIP_READ_BITS(block_type, 2);
+-
+- if (block_type == 0) {
+- /* uncompressed block */
+- unsigned char lens_buf[4];
+-
+- /* go to byte boundary */
+- i = bits_left & 7; MSZIP_REMOVE_BITS(i);
+-
+- /* read 4 bytes of data, emptying the bit-buffer if necessary */
+- for (i = 0; (bits_left >= 8); i++) {
+- if (i == 4) return INF_ERR_BITBUF;
+- lens_buf[i] = MSZIP_PEEK_BITS(8);
+- MSZIP_REMOVE_BITS(8);
+- }
+- if (bits_left != 0) return INF_ERR_BITBUF;
+- while (i < 4) {
+- if (i_ptr >= i_end) {
+- if (mszip_read_input(zip)) return zip->error;
+- i_ptr = zip->i_ptr;
+- i_end = zip->i_end;
+- if(i_ptr == i_end) break;
+- }
+- lens_buf[i++] = *i_ptr++;
+- }
+- if (i < 4) return INF_ERR_BITBUF;
+-
+- /* get the length and its complement */
+- length = lens_buf[0] | (lens_buf[1] << 8);
+- i = lens_buf[2] | (lens_buf[3] << 8);
+- if (length != (~i & 0xFFFF)) return INF_ERR_COMPLEMENT;
+-
+- /* read and copy the uncompressed data into the window */
+- while (length > 0) {
+- if (i_ptr >= i_end) {
+- if (mszip_read_input(zip)) return zip->error;
+- i_ptr = zip->i_ptr;
+- i_end = zip->i_end;
+- if(i_ptr == i_end) break;
+- }
+-
+- this_run = length;
+- if (this_run > (unsigned int)(i_end - i_ptr)) this_run = i_end - i_ptr;
+- if (this_run > (MSZIP_FRAME_SIZE - zip->window_posn))
+- this_run = MSZIP_FRAME_SIZE - zip->window_posn;
+-
+- memcpy(&zip->window[zip->window_posn], i_ptr, this_run);
+- zip->window_posn += this_run;
+- i_ptr += this_run;
+- length -= this_run;
+-
+- if (zip->window_posn == MSZIP_FRAME_SIZE) {
+- if (zip->flush_window(zip, MSZIP_FRAME_SIZE)) return INF_ERR_FLUSH;
+- zip->window_posn = 0;
+- }
+- }
+- }
+- else if ((block_type == 1) || (block_type == 2)) {
+- /* Huffman-compressed LZ77 block */
+- unsigned int window_posn, match_posn, code;
+-
+- if (block_type == 1) {
+- /* block with fixed Huffman codes */
+- i = 0;
+- while (i < 144) zip->LITERAL_len[i++] = 8;
+- while (i < 256) zip->LITERAL_len[i++] = 9;
+- while (i < 280) zip->LITERAL_len[i++] = 7;
+- while (i < 288) zip->LITERAL_len[i++] = 8;
+- for (i = 0; i < 32; i++) zip->DISTANCE_len[i] = 5;
+- }
+- else {
+- /* block with dynamic Huffman codes */
+- MSZIP_STORE_BITS;
+- if ((i = mszip_read_lens(zip))) return i;
+- MSZIP_RESTORE_BITS;
+- }
+-
+- /* now huffman lengths are read for either kind of block,
+- * create huffman decoding tables */
+- if (mszip_make_decode_table(MSZIP_LITERAL_MAXSYMBOLS, MSZIP_LITERAL_TABLEBITS,
+- &zip->LITERAL_len[0], &zip->LITERAL_table[0]))
+- {
+- return INF_ERR_LITERALTBL;
+- }
+-
+- if (mszip_make_decode_table(MSZIP_DISTANCE_MAXSYMBOLS,MSZIP_DISTANCE_TABLEBITS,
+- &zip->DISTANCE_len[0], &zip->DISTANCE_table[0]))
+- {
+- return INF_ERR_DISTANCETBL;
+- }
+-
+- /* decode forever until end of block code */
+- window_posn = zip->window_posn;
+- while (1) {
+- MSZIP_READ_HUFFSYM(LITERAL, code);
+- if (code < 256) {
+- zip->window[window_posn++] = (unsigned char) code;
+- if (window_posn == MSZIP_FRAME_SIZE) {
+- if (zip->flush_window(zip, MSZIP_FRAME_SIZE)) return INF_ERR_FLUSH;
+- window_posn = 0;
+- }
+- }
+- else if (code == 256) {
+- /* END OF BLOCK CODE: loop break point */
+- break;
+- }
+- else {
+- code -= 257;
+- if (code >= 29) return INF_ERR_LITCODE;
+- MSZIP_READ_BITS_T(length, mszip_lit_extrabits[code]);
+- length += mszip_lit_lengths[code];
+-
+- MSZIP_READ_HUFFSYM(DISTANCE, code);
+- if (code >= 30) return INF_ERR_DISTCODE;
+- MSZIP_READ_BITS_T(distance, mszip_dist_extrabits[code]);
+- distance += mszip_dist_offsets[code];
+-
+- /* match position is window position minus distance. If distance
+- * is more than window position numerically, it must 'wrap
+- * around' the frame size. */
+- match_posn = ((distance > window_posn) ? MSZIP_FRAME_SIZE : 0)
+- + window_posn - distance;
+-
+- /* copy match */
+- if (length < 12) {
+- /* short match, use slower loop but no loop setup code */
+- while (length--) {
+- zip->window[window_posn++] = zip->window[match_posn++];
+- match_posn &= MSZIP_FRAME_SIZE - 1;
+-
+- if (window_posn == MSZIP_FRAME_SIZE) {
+- if (zip->flush_window(zip, MSZIP_FRAME_SIZE))
+- return INF_ERR_FLUSH;
+- window_posn = 0;
+- }
+- }
+- }
+- else {
+- /* longer match, use faster loop but with setup expense */
+- unsigned char *runsrc, *rundest;
+- do {
+- this_run = length;
+- if ((match_posn + this_run) > MSZIP_FRAME_SIZE)
+- this_run = MSZIP_FRAME_SIZE - match_posn;
+- if ((window_posn + this_run) > MSZIP_FRAME_SIZE)
+- this_run = MSZIP_FRAME_SIZE - window_posn;
+-
+- rundest = &zip->window[window_posn]; window_posn += this_run;
+- runsrc = &zip->window[match_posn]; match_posn += this_run;
+- length -= this_run;
+- while (this_run--) *rundest++ = *runsrc++;
+-
+- /* flush if necessary */
+- if (window_posn == MSZIP_FRAME_SIZE) {
+- if (zip->flush_window(zip, MSZIP_FRAME_SIZE))
+- return INF_ERR_FLUSH;
+- window_posn = 0;
+- }
+- if (match_posn == MSZIP_FRAME_SIZE) match_posn = 0;
+- } while (length > 0);
+- }
+-
+- } /* else (code >= 257) */
+-
+- } /* while (forever) -- break point at 'code == 256' */
+- zip->window_posn = window_posn;
+- }
+- else {
+- /* block_type == 3 -- bad block type */
+- return INF_ERR_BLOCKTYPE;
+- }
+- } while (!last_block);
+-
+- /* flush the remaining data */
+- if (zip->window_posn) {
+- if (zip->flush_window(zip, zip->window_posn)) return INF_ERR_FLUSH;
+- }
+- MSZIP_STORE_BITS;
+-
+- /* return success */
+- return 0;
+-}
+-
+-/* inflate() calls this whenever the window should be flushed. As
+- * MSZIP only expands to the size of the window, the implementation used
+- * simply keeps track of the amount of data flushed, and if more than 32k
+- * is flushed, an error is raised.
+- */
+-static int mszip_flush_window(struct mszip_stream *zip,
+- unsigned int data_flushed)
+-{
+- zip->bytes_output += data_flushed;
+- if (zip->bytes_output > MSZIP_FRAME_SIZE) {
+- cli_dbgmsg("mszip_flush_window: overflow: %u bytes flushed, total is now %u\n", data_flushed, zip->bytes_output);
+- return 1;
+- }
+- return 0;
+-}
+-
+-struct mszip_stream *mszip_init(int ofd,
+- int input_buffer_size,
+- int repair_mode,
+- struct cab_file *file,
+- int (*read_cb)(struct cab_file *, unsigned char *, int))
+-{
+- struct mszip_stream *zip;
+-
+- input_buffer_size = (input_buffer_size + 1) & -2;
+- if (!input_buffer_size) return NULL;
+-
+- /* allocate decompression state */
+- if (!(zip = cli_calloc(1, sizeof(struct mszip_stream)))) {
+- cli_errmsg("mszip_stream: Unable to allocate zip buffer\n");
+- return NULL;
+- }
+-
+- /* allocate input buffer */
+- zip->inbuf = cli_malloc((size_t) input_buffer_size);
+- if (!zip->inbuf) {
+- cli_errmsg("mszip_stream: Unable to allocate input buffer\n");
+- free(zip);
+- return NULL;
+- }
+-
+- /* initialise decompression state */
+- zip->ofd = ofd;
+- zip->wflag = 1;
+- zip->inbuf_size = input_buffer_size;
+- zip->error = CL_SUCCESS;
+- zip->repair_mode = repair_mode;
+- zip->flush_window = &mszip_flush_window;
+- zip->input_end = 0;
+-
+- zip->i_ptr = zip->i_end = &zip->inbuf[0];
+- zip->o_ptr = zip->o_end = NULL;
+- zip->bit_buffer = 0; zip->bits_left = 0;
+-
+- zip->file = file;
+- zip->read_cb = read_cb;
+-
+- return zip;
+-}
+-
+-int mszip_decompress(struct mszip_stream *zip, uint32_t out_bytes) {
+- /* for the bit buffer */
+- register unsigned int bit_buffer;
+- register int bits_left;
+- unsigned char *i_ptr, *i_end;
+-
+- int i, ret, state, error;
+-
+- /* easy answers */
+- if (!zip) return CL_ENULLARG;
+- if (zip->error) return zip->error;
+-
+- /* flush out any stored-up bytes before we begin */
+- i = zip->o_end - zip->o_ptr;
+- if (((off_t) i > out_bytes) && ((int) out_bytes >= 0)) i = (int) out_bytes;
+- if (i) {
+- if (zip->wflag && (ret = mspack_write(zip->ofd, zip->o_ptr, i, zip->file)) != CL_SUCCESS) {
+- return zip->error = ret;
+- }
+- zip->o_ptr += i;
+- out_bytes -= i;
+- }
+- if (out_bytes == 0) return CL_SUCCESS;
+-
+- while (out_bytes > 0) {
+- /* unpack another block */
+- MSZIP_RESTORE_BITS;
+-
+- /* skip to next read 'CK' header */
+- i = bits_left & 7; MSZIP_REMOVE_BITS(i); /* align to bytestream */
+- state = 0;
+- do {
+- MSZIP_READ_BITS(i, 8);
+- if (i == 'C') state = 1;
+- else if ((state == 1) && (i == 'K')) state = 2;
+- else state = 0;
+- } while (state != 2);
+-
+- /* inflate a block, repair and realign if necessary */
+- zip->window_posn = 0;
+- zip->bytes_output = 0;
+- MSZIP_STORE_BITS;
+- if ((error = mszip_inflate(zip))) {
+- cli_dbgmsg("mszip_decompress: inflate error %d\n", error);
+- if (zip->repair_mode) {
+- cli_dbgmsg("mszip_decompress: MSZIP error, %u bytes of data lost\n",
+- MSZIP_FRAME_SIZE - zip->bytes_output);
+- for (i = zip->bytes_output; i < MSZIP_FRAME_SIZE; i++) {
+- zip->window[i] = '\0';
+- }
+- zip->bytes_output = MSZIP_FRAME_SIZE;
+- }
+- else {
+- return zip->error = (error > 0) ? error : CL_EFORMAT;
+- }
+- }
+- zip->o_ptr = &zip->window[0];
+- zip->o_end = &zip->o_ptr[zip->bytes_output];
+-
+- /* write a frame */
+- i = (out_bytes < (off_t)zip->bytes_output) ?
+- (int)out_bytes : zip->bytes_output;
+- if (zip->wflag && (ret = mspack_write(zip->ofd, zip->o_ptr, i, zip->file)) != CL_SUCCESS) {
+- return zip->error = ret;
+- }
+-
+- /* mspack errors (i.e. read errors) are fatal and can't be recovered */
+- if ((error > 0) && zip->repair_mode) return error;
+-
+- zip->o_ptr += i;
+- out_bytes -= i;
+- }
+-
+- if (out_bytes)
+- cli_dbgmsg("mszip_decompress: bytes left to output\n");
+-
+- return CL_SUCCESS;
+-}
+-
+-void mszip_free(struct mszip_stream *zip) {
+- if (zip) {
+- free(zip->inbuf);
+- free(zip);
+- }
+-}
+-
+-/***************************************************************************
+- * LZX decompression implementation
+- ***************************************************************************
+- * The LZX method was created by Jonathan Forbes and Tomi Poutanen, adapted
+- * by Microsoft Corporation.
+- *
+- */
+-
+-/* LZX decompressor input macros
+- *
+- * LZX_STORE_BITS stores bitstream state in lzx_stream structure
+- * LZX_RESTORE_BITS restores bitstream state from lzx_stream structure
+- * LZX_READ_BITS(var,n) takes N bits from the buffer and puts them in var
+- * LZX_ENSURE_BITS(n) ensures there are at least N bits in the bit buffer.
+- * LZX_PEEK_BITS(n) extracts without removing N bits from the bit buffer
+- * LZX_REMOVE_BITS(n) removes N bits from the bit buffer
+- *
+- */
+-
+-#define LZX_BITBUF_WIDTH (sizeof(bit_buffer) * CHAR_BIT)
+-
+-#define LZX_STORE_BITS do { \
+- lzx->i_ptr = i_ptr; \
+- lzx->i_end = i_end; \
+- lzx->bit_buffer = bit_buffer; \
+- lzx->bits_left = bits_left; \
+-} while (0)
+-
+-#define LZX_RESTORE_BITS do { \
+- i_ptr = lzx->i_ptr; \
+- i_end = lzx->i_end; \
+- bit_buffer = lzx->bit_buffer; \
+- bits_left = lzx->bits_left; \
+-} while (0)
+-
+-#define LZX_ENSURE_BITS(nbits) \
+- while (bits_left < (nbits)) { \
+- if (i_ptr + 1 >= i_end) { \
+- if (lzx_read_input(lzx)) return lzx->error; \
+- i_ptr = lzx->i_ptr; \
+- i_end = lzx->i_end; \
+- } \
+- bit_buffer |= ((i_ptr[1] << 8) | i_ptr[0]) \
+- << (LZX_BITBUF_WIDTH - 16 - bits_left); \
+- bits_left += 16; \
+- i_ptr += 2; \
+- }
+-
+-#define LZX_PEEK_BITS(nbits) (bit_buffer >> (LZX_BITBUF_WIDTH - (nbits)))
+-
+-#define LZX_REMOVE_BITS(nbits) ((bit_buffer <<= (nbits)), (bits_left -= (nbits)))
+-
+-#define LZX_READ_BITS(val, nbits) do { \
+- LZX_ENSURE_BITS(nbits); \
+- (val) = LZX_PEEK_BITS(nbits); \
+- LZX_REMOVE_BITS(nbits); \
+-} while (0)
+-
+-static int lzx_read_input(struct lzx_stream *lzx) {
+- int bread = lzx->read_cb(lzx->file, &lzx->inbuf[0], (int)lzx->inbuf_size);
+- if (bread < 0) {
+- if (lzx->file->error == CL_BREAK)
+- return lzx->error = CL_BREAK;
+- else
+- return lzx->error = CL_EFORMAT;
+- }
+-
+- /* huff decode's ENSURE_BYTES(16) might overrun the input stream, even
+- * if those bits aren't used, so fake 2 more bytes */
+- if (bread == 0) {
+- if (lzx->input_end) {
+- cli_dbgmsg("lzx_read_input: out of input bytes\n");
+- return lzx->error = CL_EREAD;
+- }
+- else {
+- bread = 2;
+- lzx->inbuf[0] = lzx->inbuf[1] = 0;
+- lzx->input_end = 1;
+- }
+- }
+-
+- lzx->i_ptr = &lzx->inbuf[0];
+- lzx->i_end = &lzx->inbuf[bread];
+-
+- return CL_SUCCESS;
+-}
+-
+-/* Huffman decoding macros */
+-
+-/* LZX_READ_HUFFSYM(tablename, var) decodes one huffman symbol from the
+- * bitstream using the stated table and puts it in var.
+- */
+-#define LZX_READ_HUFFSYM(tbl, var) do { \
+- /* huffman symbols can be up to 16 bits long */ \
+- LZX_ENSURE_BITS(16); \
+- /* immediate table lookup of [tablebits] bits of the code */ \
+- sym = lzx->tbl##_table[LZX_PEEK_BITS(LZX_##tbl##_TABLEBITS)]; \
+- /* is the symbol is longer than [tablebits] bits? (i=node index) */ \
+- if (sym >= LZX_##tbl##_MAXSYMBOLS) { \
+- /* decode remaining bits by tree traversal */ \
+- i = 1 << (LZX_BITBUF_WIDTH - LZX_##tbl##_TABLEBITS); \
+- do { \
+- /* one less bit. error if we run out of bits before decode */ \
+- i >>= 1; \
+- if (i == 0) { \
+- cli_dbgmsg("lzx: out of bits in huffman decode\n"); \
+- return lzx->error = CL_EFORMAT; \
+- } \
+- /* double node index and add 0 (left branch) or 1 (right) */ \
+- sym <<= 1; sym |= (bit_buffer & i) ? 1 : 0; \
+- /* hop to next node index / decoded symbol */ \
+- if(sym >= (1 << LZX_##tbl##_TABLEBITS) + (LZX_##tbl##_MAXSYMBOLS * 2)) { \
+- cli_dbgmsg("lzx: index out of table\n"); \
+- return lzx->error = CL_EFORMAT; \
+- } \
+- sym = lzx->tbl##_table[sym]; \
+- /* while we are still in node indicies, not decoded symbols */ \
+- } while (sym >= LZX_##tbl##_MAXSYMBOLS); \
+- } \
+- /* result */ \
+- (var) = sym; \
+- /* look up the code length of that symbol and discard those bits */ \
+- i = lzx->tbl##_len[sym]; \
+- LZX_REMOVE_BITS(i); \
+-} while (0)
+-
+-/* LZX_BUILD_TABLE(tbl) builds a huffman lookup table from code lengths */
+-#define LZX_BUILD_TABLE(tbl) \
+- if (lzx_make_decode_table(LZX_##tbl##_MAXSYMBOLS, LZX_##tbl##_TABLEBITS, \
+- &lzx->tbl##_len[0], &lzx->tbl##_table[0])) \
+- { \
+- cli_dbgmsg("lzx: failed to build %s table\n", #tbl); \
+- return lzx->error = CL_EFORMAT; \
+- }
+-
+-/* lzx_make_decode_table(nsyms, nbits, length[], table[])
+- *
+- * This function was coded by David Tritscher. It builds a fast huffman
+- * decoding table from a canonical huffman code lengths table.
+- *
+- * nsyms = total number of symbols in this huffman tree.
+- * nbits = any symbols with a code length of nbits or less can be decoded
+- * in one lookup of the table.
+- * length = A table to get code lengths from [0 to syms-1]
+- * table = The table to fill up with decoded symbols and pointers.
+- *
+- * Returns 0 for OK or 1 for error
+- */
+-
+-static int lzx_make_decode_table(unsigned int nsyms, unsigned int nbits,
+- unsigned char *length, unsigned short *table)
+-{
+- register unsigned short sym;
+- register unsigned int leaf, fill;
+- register unsigned char bit_num;
+- unsigned int pos = 0; /* the current position in the decode table */
+- unsigned int table_mask = 1 << nbits;
+- unsigned int bit_mask = table_mask >> 1; /* don't do 0 length codes */
+- unsigned int next_symbol = bit_mask; /* base of allocation for long codes */
+-
+- /* fill entries for codes short enough for a direct mapping */
+- for (bit_num = 1; bit_num <= nbits; bit_num++) {
+- for (sym = 0; sym < nsyms; sym++) {
+- if (length[sym] != bit_num) continue;
+- leaf = pos;
+- if((pos += bit_mask) > table_mask) return 1; /* table overrun */
+- /* fill all possible lookups of this symbol with the symbol itself */
+- for (fill = bit_mask; fill-- > 0;) table[leaf++] = sym;
+- }
+- bit_mask >>= 1;
+- }
+-
+- /* full table already? */
+- if (pos == table_mask) return 0;
+-
+- /* clear the remainder of the table */
+- for (sym = pos; sym < table_mask; sym++) table[sym] = 0xFFFF;
+-
+- /* allow codes to be up to nbits+16 long, instead of nbits */
+- pos <<= 16;
+- table_mask <<= 16;
+- bit_mask = 1 << 15;
+-
+- for (bit_num = nbits+1; bit_num <= 16; bit_num++) {
+- for (sym = 0; sym < nsyms; sym++) {
+- if (length[sym] != bit_num) continue;
+-
+- leaf = pos >> 16;
+- for (fill = 0; fill < bit_num - nbits; fill++) {
+- /* if this path hasn't been taken yet, 'allocate' two entries */
+- if (table[leaf] == 0xFFFF) {
+- table[(next_symbol << 1)] = 0xFFFF;
+- table[(next_symbol << 1) + 1] = 0xFFFF;
+- table[leaf] = next_symbol++;
+- }
+- /* follow the path and select either left or right for next bit */
+- leaf = table[leaf] << 1;
+- if ((pos >> (15-fill)) & 1) leaf++;
+- }
+- table[leaf] = sym;
+-
+- if ((pos += bit_mask) > table_mask) return 1; /* table overflow */
+- }
+- bit_mask >>= 1;
+- }
+-
+- /* full table? */
+- if (pos == table_mask) return 0;
+-
+- /* either erroneous table, or all elements are 0 - let's find out. */
+- for (sym = 0; sym < nsyms; sym++) if (length[sym]) return 1;
+- return 0;
+-}
+-
+-/* LZX_READ_LENGTHS(tablename, first, last) reads in code lengths for symbols
+- * first to last in the given table. The code lengths are stored in their
+- * own special LZX way.
+- */
+-#define LZX_READ_LENGTHS(tbl, first, last) do { \
+- LZX_STORE_BITS; \
+- if (lzx_read_lens(lzx, &lzx->tbl##_len[0], (first), \
+- (unsigned int)(last))) return lzx->error; \
+- LZX_RESTORE_BITS; \
+-} while (0)
+-
+-static int lzx_read_lens(struct lzx_stream *lzx, unsigned char *lens,
+- unsigned int first, unsigned int last)
+-{
+- /* bit buffer and huffman symbol decode variables */
+- register unsigned int bit_buffer;
+- register int bits_left, i;
+- register unsigned short sym;
+- unsigned char *i_ptr, *i_end;
+-
+- unsigned int x, y;
+- int z;
+-
+- LZX_RESTORE_BITS;
+-
+- /* read lengths for pretree (20 symbols, lengths stored in fixed 4 bits) */
+- for (x = 0; x < 20; x++) {
+- LZX_READ_BITS(y, 4);
+- lzx->PRETREE_len[x] = y;
+- }
+- LZX_BUILD_TABLE(PRETREE);
+-
+- for (x = first; x < last; ) {
+- LZX_READ_HUFFSYM(PRETREE, z);
+- if (z == 17) {
+- /* code = 17, run of ([read 4 bits]+4) zeros */
+- LZX_READ_BITS(y, 4); y += 4;
+- while (y--) lens[x++] = 0;
+- }
+- else if (z == 18) {
+- /* code = 18, run of ([read 5 bits]+20) zeros */
+- LZX_READ_BITS(y, 5); y += 20;
+- while (y--) lens[x++] = 0;
+- }
+- else if (z == 19) {
+- /* code = 19, run of ([read 1 bit]+4) [read huffman symbol] */
+- LZX_READ_BITS(y, 1); y += 4;
+- LZX_READ_HUFFSYM(PRETREE, z);
+- z = lens[x] - z; if (z < 0) z += 17;
+- while (y--) lens[x++] = z;
+- }
+- else {
+- /* code = 0 to 16, delta current length entry */
+- z = lens[x] - z; if (z < 0) z += 17;
+- lens[x++] = z;
+- }
+- }
+-
+- LZX_STORE_BITS;
+-
+- return CL_SUCCESS;
+-}
+-
+-static void lzx_reset_state(struct lzx_stream *lzx) {
+- int i;
+-
+- lzx->R0 = 1;
+- lzx->R1 = 1;
+- lzx->R2 = 1;
+- lzx->header_read = 0;
+- lzx->block_remaining = 0;
+- lzx->block_type = LZX_BLOCKTYPE_INVALID;
+-
+- /* initialise tables to 0 (because deltas will be applied to them) */
+- for (i = 0; i < LZX_MAINTREE_MAXSYMBOLS; i++) lzx->MAINTREE_len[i] = 0;
+- for (i = 0; i < LZX_LENGTH_MAXSYMBOLS; i++) lzx->LENGTH_len[i] = 0;
+-}
+-
+-/*-------- main LZX code --------*/
+-
+-struct lzx_stream *lzx_init(int ofd,
+- int window_bits,
+- int reset_interval,
+- int input_buffer_size,
+- off_t output_length,
+- struct cab_file *file,
+- int (*read_cb)(struct cab_file *, unsigned char *, int))
+-{
+- unsigned int window_size = 1 << window_bits;
+- struct lzx_stream *lzx;
+- int i, j;
+-
+- /* LZX supports window sizes of 2^15 (32Kb) through 2^21 (2Mb) */
+- if (window_bits < 15 || window_bits > 21) return NULL;
+-
+- input_buffer_size = (input_buffer_size + 1) & -2;
+- if (!input_buffer_size) return NULL;
+-
+- /* allocate decompression state */
+- if (!(lzx = cli_calloc(1, sizeof(struct lzx_stream)))) {
+- return NULL;
+- }
+-
+- for (i = 0, j = 0; i < 51; i += 2) {
+- lzx->extra_bits[i] = j; /* 0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7... */
+- if(i < 50)
+- lzx->extra_bits[i+1] = j;
+- if ((i != 0) && (j < 17)) j++; /* 0,0,1,2,3,4...15,16,17,17,17,17... */
+- }
+-
+- for (i = 0, j = 0; i < 51; i++) {
+- lzx->position_base[i] = j; /* 0,1,2,3,4,6,8,12,16,24,32,... */
+- j += 1 << lzx->extra_bits[i]; /* 1,1,1,1,2,2,4,4,8,8,16,16,32,32,... */
+- }
+-
+- /* allocate decompression window and input buffer */
+- lzx->window = cli_calloc(1, (size_t) window_size);
+- if(!lzx->window) {
+- free(lzx);
+- return NULL;
+- }
+-
+- lzx->inbuf = cli_calloc(1, (size_t) input_buffer_size);
+- if (!lzx->inbuf) {
+- free(lzx->window);
+- free(lzx);
+- return NULL;
+- }
+-
+- /* initialise decompression state */
+- lzx->ofd = ofd;
+- lzx->wflag = 1;
+- lzx->offset = 0;
+- lzx->length = output_length;
+- lzx->file = file;
+- lzx->read_cb = read_cb;
+-
+- lzx->inbuf_size = input_buffer_size;
+- lzx->window_size = 1 << window_bits;
+- lzx->window_posn = 0;
+- lzx->frame_posn = 0;
+- lzx->frame = 0;
+- lzx->reset_interval = reset_interval;
+- lzx->intel_filesize = 0;
+- lzx->intel_curpos = 0;
+-
+- /* window bits: 15 16 17 18 19 20 21
+- * position slots: 30 32 34 36 38 42 50 */
+- lzx->posn_slots = ((window_bits == 21) ? 50 :
+- ((window_bits == 20) ? 42 : (window_bits << 1)));
+- lzx->intel_started = 0;
+- lzx->input_end = 0;
+-
+- lzx->error = CL_SUCCESS;
+-
+- lzx->i_ptr = lzx->i_end = &lzx->inbuf[0];
+- lzx->o_ptr = lzx->o_end = &lzx->e8_buf[0];
+- lzx->bit_buffer = lzx->bits_left = 0;
+-
+- lzx_reset_state(lzx);
+- return lzx;
+-}
+-
+-void lzx_set_output_length(struct lzx_stream *lzx, off_t out_bytes) {
+- if (lzx) lzx->length = out_bytes;
+-}
+-
+-int lzx_decompress(struct lzx_stream *lzx, uint32_t out_bytes) {
+- /* bitstream reading and huffman variables */
+- register unsigned int bit_buffer;
+- register int bits_left, i=0;
+- register unsigned short sym;
+- unsigned char *i_ptr, *i_end;
+-
+- int match_length, length_footer, extra, verbatim_bits, bytes_todo;
+- int this_run, main_element, aligned_bits, j, ret, warned=0;
+- unsigned char *window, *runsrc, *rundest, buf[12];
+- unsigned int frame_size=0, end_frame, match_offset, window_posn;
+- unsigned int R0, R1, R2;
+-
+- /* easy answers */
+- if (!lzx) return CL_ENULLARG;
+- if (lzx->error) return lzx->error;
+-
+- /* flush out any stored-up bytes before we begin */
+- i = lzx->o_end - lzx->o_ptr;
+- if (((off_t) i > out_bytes) && ((int) out_bytes >= 0)) i = (int) out_bytes;
+- if (i) {
+- if (lzx->wflag && (ret = mspack_write(lzx->ofd, lzx->o_ptr, i, lzx->file)) != CL_SUCCESS) {
+- return lzx->error = ret;
+- }
+- lzx->o_ptr += i;
+- lzx->offset += i;
+- out_bytes -= i;
+- }
+- if (out_bytes == 0) return CL_SUCCESS;
+-
+- /* restore local state */
+- LZX_RESTORE_BITS;
+- window = lzx->window;
+- window_posn = lzx->window_posn;
+- R0 = lzx->R0;
+- R1 = lzx->R1;
+- R2 = lzx->R2;
+-
+- end_frame = (unsigned int)((lzx->offset + out_bytes) / LZX_FRAME_SIZE) + 1;
+- cli_dbgmsg("lzx_decompress: end frame = %u\n", end_frame);
+-
+- while (lzx->frame < end_frame) {
+- cli_dbgmsg("lzx_decompress: current frame = %u\n", lzx->frame);
+- /* have we reached the reset interval? (if there is one?) */
+- if (lzx->reset_interval && ((lzx->frame % lzx->reset_interval) == 0)) {
+- if (lzx->block_remaining) {
+- /* this is a file format error, but we need to extract what we can and scan that */
+- cli_dbgmsg("lzx_decompress: %d bytes remaining at reset interval\n", lzx->block_remaining);
+- if (!warned) {
+- cli_dbgmsg("Detected an invalid reset interval during decompression.\n");
+- warned++;
+- }
+- if (!lzx->header_read) {
+- /* cannot continue if no header at all */
+- return lzx->error = CL_EFORMAT;
+- }
+- } else {
+- /* re-read the intel header and reset the huffman lengths */
+- lzx_reset_state(lzx);
+- }
+- }
+-
+- /* read header if necessary */
+- if (!lzx->header_read) {
+- /* read 1 bit. if bit=0, intel filesize = 0.
+- * if bit=1, read intel filesize (32 bits) */
+- j = 0; LZX_READ_BITS(i, 1); if (i) { LZX_READ_BITS(i, 16); LZX_READ_BITS(j, 16); }
+- lzx->intel_filesize = (i << 16) | j;
+- lzx->header_read = 1;
+- }
+-
+- /* calculate size of frame: all frames are 32k except the final frame
+- * which is 32kb or less. this can only be calculated when lzx->length
+- * has been filled in. */
+- frame_size = LZX_FRAME_SIZE;
+- if (lzx->length && (lzx->length - lzx->offset) < (off_t)frame_size) {
+- frame_size = lzx->length - lzx->offset;
+- }
+-
+- /* decode until one more frame is available */
+- bytes_todo = lzx->frame_posn + frame_size - window_posn;
+- while (bytes_todo > 0) {
+- /* initialise new block, if one is needed */
+- if (lzx->block_remaining == 0) {
+- /* realign if previous block was an odd-sized UNCOMPRESSED block */
+- if ((lzx->block_type == LZX_BLOCKTYPE_UNCOMPRESSED) &&
+- (lzx->block_length & 1))
+- {
+- if (i_ptr == i_end) {
+- if (lzx_read_input(lzx)) return lzx->error;
+- i_ptr = lzx->i_ptr;
+- i_end = lzx->i_end;
+- }
+- i_ptr++;
+- }
+-
+- /* read block type (3 bits) and block length (24 bits) */
+- LZX_READ_BITS(lzx->block_type, 3);
+- LZX_READ_BITS(i, 16); LZX_READ_BITS(j, 8);
+- lzx->block_remaining = lzx->block_length = (i << 8) | j;
+-
+- /* read individual block headers */
+- switch (lzx->block_type) {
+- case LZX_BLOCKTYPE_ALIGNED:
+- /* read lengths of and build aligned huffman decoding tree */
+- for (i = 0; i < 8; i++) { LZX_READ_BITS(j, 3); lzx->ALIGNED_len[i] = j; }
+- LZX_BUILD_TABLE(ALIGNED);
+- /* no break -- rest of aligned header is same as verbatim */
+- case LZX_BLOCKTYPE_VERBATIM:
+- /* read lengths of and build main huffman decoding tree */
+- LZX_READ_LENGTHS(MAINTREE, 0, 256);
+- LZX_READ_LENGTHS(MAINTREE, 256, LZX_NUM_CHARS + (lzx->posn_slots << 3));
+- LZX_BUILD_TABLE(MAINTREE);
+- /* if the literal 0xE8 is anywhere in the block... */
+- if (lzx->MAINTREE_len[0xE8] != 0) lzx->intel_started = 1;
+- /* read lengths of and build lengths huffman decoding tree */
+- LZX_READ_LENGTHS(LENGTH, 0, LZX_NUM_SECONDARY_LENGTHS);
+- LZX_BUILD_TABLE(LENGTH);
+- break;
+-
+- case LZX_BLOCKTYPE_UNCOMPRESSED:
+- /* because we can't assume otherwise */
+- lzx->intel_started = 1;
+-
+- /* read 1-16 (not 0-15) bits to align to bytes */
+- LZX_ENSURE_BITS(16);
+- if (bits_left > 16) i_ptr -= 2;
+- bits_left = 0; bit_buffer = 0;
+-
+- /* read 12 bytes of stored R0 / R1 / R2 values */
+- for (rundest = &buf[0], i = 0; i < 12; i++) {
+- if (i_ptr == i_end) {
+- if (lzx_read_input(lzx)) return lzx->error;
+- i_ptr = lzx->i_ptr;
+- i_end = lzx->i_end;
+- }
+- *rundest++ = *i_ptr++;
+- }
+- R0 = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+- R1 = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
+- R2 = buf[8] | (buf[9] << 8) | (buf[10] << 16) | (buf[11] << 24);
+- break;
+-
+- default:
+- cli_dbgmsg("lzx_decompress: bad block type (0x%x)\n", lzx->block_type);
+- return lzx->error = CL_EFORMAT;
+- }
+- }
+-
+- /* decode more of the block:
+- * run = min(what's available, what's needed) */
+- this_run = lzx->block_remaining;
+- if (this_run > bytes_todo) this_run = bytes_todo;
+-
+- /* assume we decode exactly this_run bytes, for now */
+- bytes_todo -= this_run;
+- lzx->block_remaining -= this_run;
+-
+- /* decode at least this_run bytes */
+- switch (lzx->block_type) {
+- case LZX_BLOCKTYPE_VERBATIM:
+- while (this_run > 0) {
+- LZX_READ_HUFFSYM(MAINTREE, main_element);
+- if (main_element < LZX_NUM_CHARS) {
+- /* literal: 0 to LZX_NUM_CHARS-1 */
+- window[window_posn++] = main_element;
+- this_run--;
+- }
+- else {
+- /* match: LZX_NUM_CHARS + ((slot<<3) | length_header (3 bits)) */
+- main_element -= LZX_NUM_CHARS;
+-
+- /* get match length */
+- match_length = main_element & LZX_NUM_PRIMARY_LENGTHS;
+- if (match_length == LZX_NUM_PRIMARY_LENGTHS) {
+- LZX_READ_HUFFSYM(LENGTH, length_footer);
+- match_length += length_footer;
+- }
+- match_length += LZX_MIN_MATCH;
+-
+- /* get match offset */
+- switch ((match_offset = (main_element >> 3))) {
+- case 0: match_offset = R0; break;
+- case 1: match_offset = R1; R1=R0; R0 = match_offset; break;
+- case 2: match_offset = R2; R2=R0; R0 = match_offset; break;
+- case 3: match_offset = 1; R2=R1; R1=R0; R0 = match_offset; break;
+- default:
+- extra = lzx->extra_bits[match_offset];
+- LZX_READ_BITS(verbatim_bits, extra);
+- match_offset = lzx->position_base[match_offset] - 2 + verbatim_bits;
+- R2 = R1; R1 = R0; R0 = match_offset;
+- }
+-
+- if ((window_posn + match_length) > lzx->window_size) {
+- cli_dbgmsg("lzx_decompress: match ran over window wrap\n");
+- return lzx->error = CL_EFORMAT;
+- }
+-
+- /* copy match */
+- rundest = &window[window_posn];
+- i = match_length;
+- /* does match offset wrap the window? */
+- if (match_offset > window_posn) {
+- /* j = length from match offset to end of window */
+- j = match_offset - window_posn;
+- if (j > (int) lzx->window_size) {
+- cli_dbgmsg("lzx_decompress: match offset beyond window boundaries\n");
+- return lzx->error = CL_EFORMAT;
+- }
+- runsrc = &window[lzx->window_size - j];
+- if (j < i) {
+- /* if match goes over the window edge, do two copy runs */
+- i -= j; while (j-- > 0) *rundest++ = *runsrc++;
+- runsrc = window;
+- }
+- while (i-- > 0) *rundest++ = *runsrc++;
+- }
+- else {
+- runsrc = rundest - match_offset;
+- if(i > (int) (lzx->window_size - window_posn))
+- i = lzx->window_size - window_posn;
+- while (i-- > 0) *rundest++ = *runsrc++;
+- }
+-
+- this_run -= match_length;
+- window_posn += match_length;
+- }
+- } /* while (this_run > 0) */
+- break;
+-
+- case LZX_BLOCKTYPE_ALIGNED:
+- while (this_run > 0) {
+- LZX_READ_HUFFSYM(MAINTREE, main_element);
+- if (main_element < LZX_NUM_CHARS) {
+- /* literal: 0 to LZX_NUM_CHARS-1 */
+- window[window_posn++] = main_element;
+- this_run--;
+- }
+- else {
+- /* match: LZX_NUM_CHARS + ((slot<<3) | length_header (3 bits)) */
+- main_element -= LZX_NUM_CHARS;
+-
+- /* get match length */
+- match_length = main_element & LZX_NUM_PRIMARY_LENGTHS;
+- if (match_length == LZX_NUM_PRIMARY_LENGTHS) {
+- LZX_READ_HUFFSYM(LENGTH, length_footer);
+- match_length += length_footer;
+- }
+- match_length += LZX_MIN_MATCH;
+-
+- /* get match offset */
+- switch ((match_offset = (main_element >> 3))) {
+- case 0: match_offset = R0; break;
+- case 1: match_offset = R1; R1 = R0; R0 = match_offset; break;
+- case 2: match_offset = R2; R2 = R0; R0 = match_offset; break;
+- default:
+- extra = lzx->extra_bits[match_offset];
+- match_offset = lzx->position_base[match_offset] - 2;
+- if (extra > 3) {
+- /* verbatim and aligned bits */
+- extra -= 3;
+- LZX_READ_BITS(verbatim_bits, extra);
+- match_offset += (verbatim_bits << 3);
+- LZX_READ_HUFFSYM(ALIGNED, aligned_bits);
+- match_offset += aligned_bits;
+- }
+- else if (extra == 3) {
+- /* aligned bits only */
+- LZX_READ_HUFFSYM(ALIGNED, aligned_bits);
+- match_offset += aligned_bits;
+- }
+- else if (extra > 0) { /* extra==1, extra==2 */
+- /* verbatim bits only */
+- LZX_READ_BITS(verbatim_bits, extra);
+- match_offset += verbatim_bits;
+- }
+- else /* extra == 0 */ {
+- /* ??? not defined in LZX specification! */
+- match_offset = 1;
+- }
+- /* update repeated offset LRU queue */
+- R2 = R1; R1 = R0; R0 = match_offset;
+- }
+-
+- if ((window_posn + match_length) > lzx->window_size) {
+- cli_dbgmsg("lzx_decompress: match ran over window wrap\n");
+- return lzx->error = CL_EFORMAT;
+- }
+-
+- /* copy match */
+- rundest = &window[window_posn];
+- i = match_length;
+- /* does match offset wrap the window? */
+- if (match_offset > window_posn) {
+- /* j = length from match offset to end of window */
+- j = match_offset - window_posn;
+- if (j > (int) lzx->window_size) {
+- cli_dbgmsg("lzx_decompress: match offset beyond window boundaries\n");
+- return lzx->error = CL_EFORMAT;
+- }
+- runsrc = &window[lzx->window_size - j];
+- if (j < i) {
+- /* if match goes over the window edge, do two copy runs */
+- i -= j; while (j-- > 0) *rundest++ = *runsrc++;
+- runsrc = window;
+- }
+- while (i-- > 0) *rundest++ = *runsrc++;
+- }
+- else {
+- runsrc = rundest - match_offset;
+- while (i-- > 0) *rundest++ = *runsrc++;
+- }
+-
+- this_run -= match_length;
+- window_posn += match_length;
+- }
+- } /* while (this_run > 0) */
+- break;
+-
+- case LZX_BLOCKTYPE_UNCOMPRESSED:
+- /* as this_run is limited not to wrap a frame, this also means it
+- * won't wrap the window (as the window is a multiple of 32k) */
+- rundest = &window[window_posn];
+- window_posn += this_run;
+- while (this_run > 0) {
+- if ((i = i_end - i_ptr)) {
+- if (i > this_run) i = this_run;
+- memcpy(rundest, i_ptr, (size_t) i);
+- rundest += i;
+- i_ptr += i;
+- this_run -= i;
+- }
+- else {
+- if (lzx_read_input(lzx)) return lzx->error;
+- i_ptr = lzx->i_ptr;
+- i_end = lzx->i_end;
+- }
+- }
+- break;
+-
+- default:
+- return lzx->error = CL_EFORMAT; /* might as well */
+- }
+-
+- /* did the final match overrun our desired this_run length? */
+- if (this_run < 0) {
+- if ((unsigned int)(-this_run) > lzx->block_remaining) {
+- cli_dbgmsg("lzx_decompress: overrun went past end of block by %d (%d remaining)\n", -this_run, lzx->block_remaining);
+- return lzx->error = CL_EFORMAT;
+- }
+- lzx->block_remaining -= -this_run;
+- }
+- } /* while (bytes_todo > 0) */
+-
+- /* streams don't extend over frame boundaries */
+- if ((window_posn - lzx->frame_posn) != frame_size) {
+- cli_dbgmsg("lzx_decompress: decode beyond output frame limits! %d != %d\n", window_posn - lzx->frame_posn, frame_size);
+- return lzx->error = CL_EFORMAT;
+- }
+-
+- /* re-align input bitstream */
+- if (bits_left > 0) LZX_ENSURE_BITS(16);
+- if (bits_left & 15) LZX_REMOVE_BITS(bits_left & 15);
+-
+- /* check that we've used all of the previous frame first */
+- if (lzx->o_ptr != lzx->o_end) {
+- cli_dbgmsg("lzx_decompress: %ld avail bytes, new %d frame\n", lzx->o_end-lzx->o_ptr, frame_size);
+- return lzx->error = CL_EFORMAT;
+- }
+-
+- /* does this intel block _really_ need decoding? */
+- if (lzx->intel_started && lzx->intel_filesize &&
+- (lzx->frame <= 32768) && (frame_size > 10))
+- {
+- unsigned char *data = &lzx->e8_buf[0];
+- unsigned char *dataend = &lzx->e8_buf[frame_size - 10];
+- signed int curpos = lzx->intel_curpos;
+- signed int filesize = lzx->intel_filesize;
+- signed int abs_off, rel_off;
+-
+- /* copy e8 block to the e8 buffer and tweak if needed */
+- lzx->o_ptr = data;
+- memcpy(data, &lzx->window[lzx->frame_posn], frame_size);
+-
+- while (data < dataend) {
+- if (*data++ != 0xE8) { curpos++; continue; }
+- abs_off = data[0] | (data[1]<<8) | (data[2]<<16) | (data[3]<<24);
+- if ((abs_off >= -curpos) && (abs_off < filesize)) {
+- rel_off = (abs_off >= 0) ? abs_off - curpos : abs_off + filesize;
+- data[0] = (unsigned char) rel_off;
+- data[1] = (unsigned char) (rel_off >> 8);
+- data[2] = (unsigned char) (rel_off >> 16);
+- data[3] = (unsigned char) (rel_off >> 24);
+- }
+- data += 4;
+- curpos += 5;
+- }
+- lzx->intel_curpos += frame_size;
+- }
+- else {
+- lzx->o_ptr = &lzx->window[lzx->frame_posn];
+- if (lzx->intel_filesize) lzx->intel_curpos += frame_size;
+- }
+- lzx->o_end = &lzx->o_ptr[frame_size];
+-
+- /* write a frame */
+- i = (out_bytes < (off_t)frame_size) ? (unsigned int)out_bytes : frame_size;
+- if (lzx->wflag && (ret = mspack_write(lzx->ofd, lzx->o_ptr, i, lzx->file)) != CL_SUCCESS) {
+- return lzx->error = ret;
+- }
+- lzx->o_ptr += i;
+- lzx->offset += i;
+- out_bytes -= i;
+-
+- /* advance frame start position */
+- lzx->frame_posn += frame_size;
+- lzx->frame++;
+-
+- /* wrap window / frame position pointers */
+- if (window_posn == lzx->window_size) window_posn = 0;
+- if (lzx->frame_posn == lzx->window_size) lzx->frame_posn = 0;
+-
+- } /* while (lzx->frame < end_frame) */
+-
+- if (out_bytes)
+- cli_dbgmsg("lzx_decompress: bytes left to output\n");
+-
+- /* store local state */
+- LZX_STORE_BITS;
+- lzx->window_posn = window_posn;
+- lzx->R0 = R0;
+- lzx->R1 = R1;
+- lzx->R2 = R2;
+-
+- return CL_SUCCESS;
+-}
+-
+-void lzx_free(struct lzx_stream *lzx) {
+- if (lzx) {
+- free(lzx->inbuf);
+- free(lzx->window);
+- free(lzx);
+- }
+-}
+-
+-/***************************************************************************
+- * Quantum decompression implementation
+- ***************************************************************************
+- * The Quantum method was created by David Stafford, adapted by Microsoft
+- * Corporation.
+- *
+- * This decompressor is based on an implementation by Matthew Russotto, used
+- * with permission.
+- *
+- * This decompressor was researched and implemented by Matthew Russotto. It
+- * has since been tidied up by Stuart Caie. More information can be found at
+- * http://www.speakeasy.org/~russotto/quantumcomp.html
+- */
+-
+-/* Quantum decompressor bitstream reading macros
+- *
+- * QTM_STORE_BITS stores bitstream state in qtm_stream structure
+- * QTM_RESTORE_BITS restores bitstream state from qtm_stream structure
+- * QTM_READ_BITS(var,n) takes N bits from the buffer and puts them in var
+- * QTM_FILL_BUFFER if there is room for another 16 bits, reads another
+- * 16 bits from the input stream.
+- * QTM_PEEK_BITS(n) extracts without removing N bits from the bit buffer
+- * QTM_REMOVE_BITS(n) removes N bits from the bit buffer
+- *
+- * These bit access routines work by using the area beyond the MSB and the
+- * LSB as a free source of zeroes. This avoids having to mask any bits.
+- * So we have to know the bit width of the bitbuffer variable.
+- */
+-
+-#define QTM_BITBUF_WIDTH (sizeof(unsigned int) * CHAR_BIT)
+-
+-#define QTM_STORE_BITS do { \
+- qtm->i_ptr = i_ptr; \
+- qtm->i_end = i_end; \
+- qtm->bit_buffer = bit_buffer; \
+- qtm->bits_left = bits_left; \
+-} while (0)
+-
+-#define QTM_RESTORE_BITS do { \
+- i_ptr = qtm->i_ptr; \
+- i_end = qtm->i_end; \
+- bit_buffer = qtm->bit_buffer; \
+- bits_left = qtm->bits_left; \
+-} while (0)
+-
+-/* adds 16 bits to bit buffer, if there's space for the new bits */
+-#define QTM_FILL_BUFFER do { \
+- if (bits_left <= (QTM_BITBUF_WIDTH - 16)) { \
+- if (i_ptr >= i_end) { \
+- if (qtm_read_input(qtm)) return qtm->error; \
+- i_ptr = qtm->i_ptr; \
+- i_end = qtm->i_end; \
+- } \
+- bit_buffer |= ((i_ptr[0] << 8) | i_ptr[1]) \
+- << (QTM_BITBUF_WIDTH - 16 - bits_left); \
+- bits_left += 16; \
+- i_ptr += 2; \
+- } \
+-} while (0)
+-
+-#define QTM_PEEK_BITS(n) (bit_buffer >> (QTM_BITBUF_WIDTH - (n)))
+-#define QTM_REMOVE_BITS(n) ((bit_buffer <<= (n)), (bits_left -= (n)))
+-
+-#define QTM_READ_BITS(val, bits) do { \
+- (val) = 0; \
+- for (bits_needed = (bits); bits_needed > 0; bits_needed -= bit_run) { \
+- QTM_FILL_BUFFER; \
+- bit_run = (bits_left < bits_needed) ? bits_left : bits_needed; \
+- (val) = ((val) << bit_run) | QTM_PEEK_BITS(bit_run); \
+- QTM_REMOVE_BITS(bit_run); \
+- } \
+-} while (0)
+-
+-static int qtm_read_input(struct qtm_stream *qtm) {
+- int nread = qtm->read_cb(qtm->file, &qtm->inbuf[0], (int)qtm->inbuf_size);
+- if (nread < 0) {
+- if (qtm->file->error == CL_BREAK)
+- return qtm->error = CL_BREAK;
+- else
+- return qtm->error = CL_EFORMAT;
+- }
+-
+- if (nread == 0) {
+- if (qtm->input_end) {
+- cli_dbgmsg("qtm_read_input: out of input bytes\n");
+- return qtm->error = CL_EREAD;
+- }
+- else {
+- nread = 2;
+- qtm->inbuf[0] = qtm->inbuf[1] = 0;
+- qtm->input_end = 1;
+- }
+- }
+-
+- qtm->i_ptr = &qtm->inbuf[0];
+- qtm->i_end = &qtm->inbuf[nread];
+- return CL_SUCCESS;
+-}
+-
+-/* Arithmetic decoder:
+- *
+- * QTM_GET_SYMBOL(model, var) fetches the next symbol from the stated model
+- * and puts it in var.
+- *
+- * If necessary, qtm_update_model() is called.
+- */
+-#define QTM_GET_SYMBOL(model, var) do { \
+- range = ((H - L) & 0xFFFF) + 1; \
+- symf = ((((C - L + 1) * model.syms[0].cumfreq)-1) / range) & 0xFFFF; \
+- \
+- for (i = 1; i < model.entries; i++) { \
+- if (model.syms[i].cumfreq <= symf) break; \
+- } \
+- (var) = model.syms[i-1].sym; \
+- \
+- range = (H - L) + 1; \
+- symf = model.syms[0].cumfreq; \
+- H = L + ((model.syms[i-1].cumfreq * range) / symf) - 1; \
+- L = L + ((model.syms[i].cumfreq * range) / symf); \
+- \
+- do { model.syms[--i].cumfreq += 8; } while (i > 0); \
+- if (model.syms[0].cumfreq > 3800) qtm_update_model(&model); \
+- \
+- while (1) { \
+- if ((L & 0x8000) != (H & 0x8000)) { \
+- if ((L & 0x4000) && !(H & 0x4000)) { \
+- /* underflow case */ \
+- C ^= 0x4000; L &= 0x3FFF; H |= 0x4000; \
+- } \
+- else break; \
+- } \
+- L <<= 1; H = (H << 1) | 1; \
+- QTM_FILL_BUFFER; \
+- C = (C << 1) | QTM_PEEK_BITS(1); \
+- QTM_REMOVE_BITS(1); \
+- } \
+-} while (0)
+-
+-static void qtm_update_model(struct qtm_model *model) {
+- struct qtm_modelsym tmp;
+- int i, j;
+-
+- if (--model->shiftsleft) {
+- for (i = model->entries - 1; i >= 0; i--) {
+- /* -1, not -2; the 0 entry saves this */
+- model->syms[i].cumfreq >>= 1;
+- if (model->syms[i].cumfreq <= model->syms[i+1].cumfreq) {
+- model->syms[i].cumfreq = model->syms[i+1].cumfreq + 1;
+- }
+- }
+- }
+- else {
+- model->shiftsleft = 50;
+- for (i = 0; i < model->entries; i++) {
+- /* no -1, want to include the 0 entry */
+- /* this converts cumfreqs into frequencies, then shifts right */
+- model->syms[i].cumfreq -= model->syms[i+1].cumfreq;
+- model->syms[i].cumfreq++; /* avoid losing things entirely */
+- model->syms[i].cumfreq >>= 1;
+- }
+-
+- /* now sort by frequencies, decreasing order -- this must be an
+- * inplace selection sort, or a sort with the same (in)stability
+- * characteristics */
+- for (i = 0; i < model->entries - 1; i++) {
+- for (j = i + 1; j < model->entries; j++) {
+- if (model->syms[i].cumfreq < model->syms[j].cumfreq) {
+- tmp = model->syms[i];
+- model->syms[i] = model->syms[j];
+- model->syms[j] = tmp;
+- }
+- }
+- }
+-
+- /* then convert frequencies back to cumfreq */
+- for (i = model->entries - 1; i >= 0; i--) {
+- model->syms[i].cumfreq += model->syms[i+1].cumfreq;
+- }
+- }
+-}
+-
+-/* Initialises a model to decode symbols from [start] to [start]+[len]-1 */
+-static void qtm_init_model(struct qtm_model *model,
+- struct qtm_modelsym *syms, int start, int len)
+-{
+- int i;
+-
+- model->shiftsleft = 4;
+- model->entries = len;
+- model->syms = syms;
+-
+- for (i = 0; i <= len; i++) {
+- syms[i].sym = start + i; /* actual symbol */
+- syms[i].cumfreq = len - i; /* current frequency of that symbol */
+- }
+-}
+-
+-
+-/*-------- main Quantum code --------*/
+-
+-struct qtm_stream *qtm_init(int ofd,
+- int window_bits, int input_buffer_size,
+- struct cab_file *file,
+- int (*read_cb)(struct cab_file *, unsigned char *, int))
+-{
+- unsigned int window_size = 1 << window_bits;
+- struct qtm_stream *qtm;
+- unsigned offset;
+- int i;
+-
+- /* Quantum supports window sizes of 2^10 (1Kb) through 2^21 (2Mb) */
+-
+- /* tk: temporary fix: only process 32KB+ window sizes */
+- if (window_bits < 15 || window_bits > 21) return NULL;
+-
+- input_buffer_size = (input_buffer_size + 1) & -2;
+- if (input_buffer_size < 2) return NULL;
+-
+- /* allocate decompression state */
+- if (!(qtm = cli_calloc(1, sizeof(struct qtm_stream)))) {
+- return NULL;
+- }
+-
+- for (i = 0, offset = 0; i < 42; i++) {
+- qtm->position_base[i] = offset;
+- qtm->extra_bits[i] = ((i < 2) ? 0 : (i - 2)) >> 1;
+- offset += 1 << qtm->extra_bits[i];
+- }
+-
+- for (i = 0, offset = 0; i < 26; i++) {
+- qtm->length_base[i] = offset;
+- qtm->length_extra[i] = (i < 2 ? 0 : i - 2) >> 2;
+- offset += 1 << qtm->length_extra[i];
+- }
+- qtm->length_base[26] = 254; qtm->length_extra[26] = 0;
+-
+- /* allocate decompression window and input buffer */
+- qtm->window = cli_malloc((size_t) window_size);
+- if (!qtm->window) {
+- cli_errmsg("qtm_init: Unable to allocate decompression window\n");
+- free(qtm);
+- return NULL;
+- }
+-
+- qtm->inbuf = cli_malloc((size_t) input_buffer_size);
+- if (!qtm->inbuf) {
+- cli_errmsg("qtm_init: Unable to allocate input buffer\n");
+- free(qtm->window);
+- free(qtm);
+- return NULL;
+- }
+-
+- /* initialise decompression state */
+- qtm->ofd = ofd;
+- qtm->wflag = 1;
+- qtm->inbuf_size = input_buffer_size;
+- qtm->window_size = window_size;
+- qtm->window_posn = 0;
+- qtm->frame_start = 0;
+- qtm->header_read = 0;
+- qtm->error = CL_SUCCESS;
+-
+- qtm->i_ptr = qtm->i_end = &qtm->inbuf[0];
+- qtm->o_ptr = qtm->o_end = &qtm->window[0];
+- qtm->bits_left = 0;
+- qtm->bit_buffer = 0;
+-
+- /* initialise arithmetic coding models
+- * - model 4 depends on window size, ranges from 20 to 24
+- * - model 5 depends on window size, ranges from 20 to 36
+- * - model 6pos depends on window size, ranges from 20 to 42
+- */
+- i = window_bits * 2;
+- qtm_init_model(&qtm->model0, &qtm->m0sym[0], 0, 64);
+- qtm_init_model(&qtm->model1, &qtm->m1sym[0], 64, 64);
+- qtm_init_model(&qtm->model2, &qtm->m2sym[0], 128, 64);
+- qtm_init_model(&qtm->model3, &qtm->m3sym[0], 192, 64);
+- qtm_init_model(&qtm->model4, &qtm->m4sym[0], 0, (i > 24) ? 24 : i);
+- qtm_init_model(&qtm->model5, &qtm->m5sym[0], 0, (i > 36) ? 36 : i);
+- qtm_init_model(&qtm->model6, &qtm->m6sym[0], 0, i);
+- qtm_init_model(&qtm->model6len, &qtm->m6lsym[0], 0, 27);
+- qtm_init_model(&qtm->model7, &qtm->m7sym[0], 0, 7);
+-
+- qtm->file = file;
+- qtm->read_cb = read_cb;
+-
+- /* all ok */
+- return qtm;
+-}
+-
+-int qtm_decompress(struct qtm_stream *qtm, uint32_t out_bytes) {
+- unsigned int frame_start, frame_end, window_posn, match_offset, range;
+- unsigned char *window, *i_ptr, *i_end, *runsrc, *rundest;
+- int i, j, selector, extra, sym, match_length, ret;
+- unsigned short H, L, C, symf;
+-
+- register unsigned int bit_buffer;
+- register unsigned char bits_left;
+- unsigned char bits_needed, bit_run;
+-
+- /* easy answers */
+- if (!qtm) return CL_ENULLARG;
+- if (qtm->error) return qtm->error;
+-
+- /* flush out any stored-up bytes before we begin */
+- i = qtm->o_end - qtm->o_ptr;
+- if (((off_t) i > out_bytes) && ((int) out_bytes >= 0)) i = (int) out_bytes;
+- if (i) {
+- if (qtm->wflag && (ret = mspack_write(qtm->ofd, qtm->o_ptr, i, qtm->file)) != CL_SUCCESS) {
+- return qtm->error = ret;
+- }
+- qtm->o_ptr += i;
+- out_bytes -= i;
+- }
+- if (out_bytes == 0) return CL_SUCCESS;
+-
+- /* restore local state */
+- QTM_RESTORE_BITS;
+- window = qtm->window;
+- window_posn = qtm->window_posn;
+- frame_start = qtm->frame_start;
+- H = qtm->H;
+- L = qtm->L;
+- C = qtm->C;
+-
+- /* while we do not have enough decoded bytes in reserve: */
+- while ((qtm->o_end - qtm->o_ptr) < out_bytes) {
+-
+- /* read header if necessary. Initialises H, L and C */
+- if (!qtm->header_read) {
+- H = 0xFFFF; L = 0; QTM_READ_BITS(C, 16);
+- qtm->header_read = 1;
+- }
+-
+- /* decode more, at most up to to frame boundary */
+- frame_end = window_posn + (out_bytes - (qtm->o_end - qtm->o_ptr));
+- if ((frame_start + QTM_FRAME_SIZE) < frame_end) {
+- frame_end = frame_start + QTM_FRAME_SIZE;
+- }
+- if (frame_end < window_posn) {
+- cli_dbgmsg("qtm_decompress: window position beyond end of frame\n");
+- return qtm->error = CL_EFORMAT;
+- }
+-
+- while (window_posn < frame_end) {
+- QTM_GET_SYMBOL(qtm->model7, selector);
+- if (selector < 4) {
+- struct qtm_model *mdl = (selector == 0) ? &qtm->model0 :
+- ((selector == 1) ? &qtm->model1 :
+- ((selector == 2) ? &qtm->model2 :
+- &qtm->model3));
+- QTM_GET_SYMBOL((*mdl), sym);
+- window[window_posn++] = sym;
+- }
+- else {
+- switch (selector) {
+- case 4: /* selector 4 = fixed length match (3 bytes) */
+- QTM_GET_SYMBOL(qtm->model4, sym);
+- QTM_READ_BITS(extra, qtm->extra_bits[sym]);
+- match_offset = qtm->position_base[sym] + extra + 1;
+- match_length = 3;
+- break;
+-
+- case 5: /* selector 5 = fixed length match (4 bytes) */
+- QTM_GET_SYMBOL(qtm->model5, sym);
+- QTM_READ_BITS(extra, qtm->extra_bits[sym]);
+- match_offset = qtm->position_base[sym] + extra + 1;
+- match_length = 4;
+- break;
+-
+- case 6: /* selector 6 = variable length match */
+- QTM_GET_SYMBOL(qtm->model6len, sym);
+- QTM_READ_BITS(extra, qtm->length_extra[sym]);
+- match_length = qtm->length_base[sym] + extra + 5;
+-
+- QTM_GET_SYMBOL(qtm->model6, sym);
+- QTM_READ_BITS(extra, qtm->extra_bits[sym]);
+- match_offset = qtm->position_base[sym] + extra + 1;
+- break;
+-
+- default:
+- /* should be impossible, model7 can only return 0-6 */
+- return qtm->error = CL_EFORMAT;
+- }
+-
+- if (window_posn + match_length > qtm->window_size) {
+- cli_dbgmsg("qtm_decompress: match ran over window wrap\n");
+- return qtm->error = CL_EFORMAT;
+- }
+-
+- rundest = &window[window_posn];
+- i = match_length;
+- /* does match offset wrap the window? */
+- if (match_offset > window_posn) {
+- /* j = length from match offset to end of window */
+- j = match_offset - window_posn;
+- if (j > (int) qtm->window_size) {
+- cli_dbgmsg("qtm_decompress: match offset beyond window boundaries\n");
+- return qtm->error = CL_EFORMAT;
+- }
+- runsrc = &window[qtm->window_size - j];
+- if (j < i) {
+- /* if match goes over the window edge, do two copy runs */
+- i -= j; while (j-- > 0) *rundest++ = *runsrc++;
+- runsrc = window;
+- }
+- while (i-- > 0) *rundest++ = *runsrc++;
+- }
+- else {
+- runsrc = rundest - match_offset;
+- if(i > (int) (qtm->window_size - window_posn))
+- i = qtm->window_size - window_posn;
+- while (i-- > 0) *rundest++ = *runsrc++;
+- }
+- window_posn += match_length;
+- }
+- } /* while (window_posn < frame_end) */
+-
+- qtm->o_end = &window[window_posn];
+-
+- /* another frame completed? */
+- if ((window_posn - frame_start) >= QTM_FRAME_SIZE) {
+- if ((window_posn - frame_start) != QTM_FRAME_SIZE) {
+- cli_dbgmsg("qtm_decompress: overshot frame alignment\n");
+- return qtm->error = CL_EFORMAT;
+- }
+-
+- /* re-align input */
+- if (bits_left & 7) QTM_REMOVE_BITS(bits_left & 7);
+- do { QTM_READ_BITS(i, 8); } while (i != 0xFF);
+- qtm->header_read = 0;
+-
+- /* window wrap? */
+- if (window_posn == qtm->window_size) {
+- /* flush all currently stored data */
+- i = (qtm->o_end - qtm->o_ptr);
+- if(i <= 0)
+- break;
+- if (qtm->wflag && (ret = mspack_write(qtm->ofd, qtm->o_ptr, i, qtm->file)) != CL_SUCCESS) {
+- return qtm->error = ret;
+- }
+- out_bytes -= i;
+- qtm->o_ptr = &window[0];
+- qtm->o_end = &window[0];
+- window_posn = 0;
+- }
+-
+- frame_start = window_posn;
+- }
+-
+- } /* while (more bytes needed) */
+-
+- if (out_bytes > 0) {
+- i = (int) out_bytes;
+- if (qtm->wflag && (ret = mspack_write(qtm->ofd, qtm->o_ptr, i, qtm->file)) != CL_SUCCESS) {
+- return qtm->error = ret;
+- }
+- qtm->o_ptr += i;
+- }
+-
+- /* store local state */
+- QTM_STORE_BITS;
+- qtm->window_posn = window_posn;
+- qtm->frame_start = frame_start;
+- qtm->H = H;
+- qtm->L = L;
+- qtm->C = C;
+-
+- return CL_SUCCESS;
+-}
+-
+-void qtm_free(struct qtm_stream *qtm) {
+- if (qtm) {
+- free(qtm->window);
+- free(qtm->inbuf);
+- free(qtm);
+- }
+-}
+diff --git a/libclamav/mspack.h b/libclamav/mspack.h
+deleted file mode 100644
+index 0ed472caeea3..000000000000
+--- a/libclamav/mspack.h
++++ /dev/null
+@@ -1,294 +0,0 @@
+-/*
+- * This file includes code from libmspack adapted for libclamav by
+- * tkojm at clamav.net
+- *
+- * Copyright (C) 2003-2004 Stuart Caie
+- *
+- * This library is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU Lesser General Public
+- * License version 2.1 as published by the Free Software Foundation.
+- *
+- * This library is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+- * Lesser General Public License for more details.
+- *
+- * You should have received a copy of the GNU Lesser General Public
+- * License along with this library; if not, write to the Free Software
+- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
+- * USA
+- */
+-
+-#ifndef __MSPACK_H
+-#define __MSPACK_H
+-
+-#include <sys/types.h>
+-#include "cab.h"
+-
+-
+-/***************************************************************************
+- * MS-ZIP decompression definitions *
+- ***************************************************************************/
+-
+-#define MSZIP_FRAME_SIZE (32768) /* size of LZ history window */
+-#define MSZIP_MAX_HUFFBITS (16) /* maximum huffman code length */
+-#define MSZIP_LITERAL_MAXSYMBOLS (288) /* literal/length huffman tree */
+-#define MSZIP_LITERAL_TABLEBITS (9)
+-#define MSZIP_DISTANCE_MAXSYMBOLS (32) /* distance huffman tree */
+-#define MSZIP_DISTANCE_TABLEBITS (6)
+-
+-/* if there are less direct lookup entries than symbols, the longer
+- * code pointers will be <= maxsymbols. This must not happen, or we
+- * will decode entries badly */
+-#if (1 << MSZIP_LITERAL_TABLEBITS) < (MSZIP_LITERAL_MAXSYMBOLS * 2)
+-# define MSZIP_LITERAL_TABLESIZE (MSZIP_LITERAL_MAXSYMBOLS * 4)
+-#else
+-# define MSZIP_LITERAL_TABLESIZE ((1 << MSZIP_LITERAL_TABLEBITS) + \
+- (MSZIP_LITERAL_MAXSYMBOLS * 2))
+-#endif
+-
+-#if (1 << MSZIP_DISTANCE_TABLEBITS) < (MSZIP_DISTANCE_MAXSYMBOLS * 2)
+-# define MSZIP_DISTANCE_TABLESIZE (MSZIP_DISTANCE_MAXSYMBOLS * 4)
+-#else
+-# define MSZIP_DISTANCE_TABLESIZE ((1 << MSZIP_DISTANCE_TABLEBITS) + \
+- (MSZIP_DISTANCE_MAXSYMBOLS * 2))
+-#endif
+-
+-struct mszip_stream {
+- int ofd; /* output file descriptor */
+-
+- /* inflate() will call this whenever the window should be emptied. */
+- int (*flush_window)(struct mszip_stream *, unsigned int);
+-
+- int error, repair_mode, bytes_output, input_end;
+-
+- /* I/O buffering */
+- unsigned char *inbuf, *i_ptr, *i_end, *o_ptr, *o_end;
+- unsigned int bit_buffer, bits_left, inbuf_size;
+-
+- unsigned int window_posn; /* offset within window */
+-
+- /* huffman code lengths */
+- unsigned char LITERAL_len[MSZIP_LITERAL_MAXSYMBOLS];
+- unsigned char DISTANCE_len[MSZIP_DISTANCE_MAXSYMBOLS];
+-
+- /* huffman decoding tables */
+- unsigned short LITERAL_table [MSZIP_LITERAL_TABLESIZE];
+- unsigned short DISTANCE_table[MSZIP_DISTANCE_TABLESIZE];
+-
+- /* 32kb history window */
+- unsigned char window[MSZIP_FRAME_SIZE];
+-
+- /* cabinet related stuff */
+- struct cab_file *file;
+- int (*read_cb)(struct cab_file *, unsigned char *, int);
+-
+- unsigned char wflag; /* write flag */
+- unsigned int last; /* prior end of content buffer */
+-
+-};
+-
+-struct mszip_stream *mszip_init(int ofd,
+- int input_buffer_size,
+- int repair_mode,
+- struct cab_file *file,
+- int (*read_cb)(struct cab_file *, unsigned char *, int));
+-
+-extern int mszip_decompress(struct mszip_stream *zip, uint32_t out_bytes);
+-
+-void mszip_free(struct mszip_stream *zip);
+-
+-
+-/***************************************************************************
+- * Quantum decompression definitions *
+- ***************************************************************************/
+-
+-/* Quantum compression / decompression definitions */
+-
+-#define QTM_FRAME_SIZE (32768)
+-
+-struct qtm_modelsym {
+- unsigned short sym, cumfreq;
+-};
+-
+-struct qtm_model {
+- int shiftsleft, entries;
+- struct qtm_modelsym *syms;
+-};
+-
+-struct qtm_stream {
+- int ofd; /* output file descriptor */
+-
+- unsigned char *window; /* decoding window */
+- unsigned int window_size; /* window size */
+- unsigned int window_posn; /* decompression offset within window */
+- unsigned int frame_start; /* start of current frame within window */
+-
+- unsigned short H, L, C; /* high/low/current: arith coding state */
+- unsigned char header_read; /* have we started decoding a new frame? */
+- unsigned char wflag; /* write flag */
+-
+- int error, input_end;
+-
+- /* data tables */
+- unsigned int position_base[42];
+- unsigned char extra_bits[42], length_base[27], length_extra[27];
+-
+- /* four literal models, each representing 64 symbols
+- * model0 for literals from 0 to 63 (selector = 0)
+- * model1 for literals from 64 to 127 (selector = 1)
+- * model2 for literals from 128 to 191 (selector = 2)
+- * model3 for literals from 129 to 255 (selector = 3) */
+- struct qtm_model model0, model1, model2, model3;
+-
+- /* three match models.
+- * model4 for match with fixed length of 3 bytes
+- * model5 for match with fixed length of 4 bytes
+- * model6 for variable length match, encoded with model6len model */
+- struct qtm_model model4, model5, model6, model6len;
+-
+- /* selector model. 0-6 to say literal (0,1,2,3) or match (4,5,6) */
+- struct qtm_model model7;
+-
+- /* symbol arrays for all models */
+- struct qtm_modelsym m0sym[64 + 1];
+- struct qtm_modelsym m1sym[64 + 1];
+- struct qtm_modelsym m2sym[64 + 1];
+- struct qtm_modelsym m3sym[64 + 1];
+- struct qtm_modelsym m4sym[24 + 1];
+- struct qtm_modelsym m5sym[36 + 1];
+- struct qtm_modelsym m6sym[42 + 1], m6lsym[27 + 1];
+- struct qtm_modelsym m7sym[7 + 1];
+-
+- /* I/O buffers - 1*/
+- unsigned int bit_buffer;
+-
+- /* cabinet related stuff */
+- struct cab_file *file;
+- int (*read_cb)(struct cab_file *, unsigned char *, int);
+-
+- /* I/O buffers - 2*/
+- unsigned char *inbuf, *i_ptr, *i_end, *o_ptr, *o_end;
+- unsigned int inbuf_size;
+- unsigned char bits_left;
+-
+-};
+-
+-extern struct qtm_stream *qtm_init(int ofd,
+- int window_bits,
+- int input_buffer_size,
+- struct cab_file *file,
+- int (*read_cb)(struct cab_file *, unsigned char *, int));
+-
+-extern int qtm_decompress(struct qtm_stream *qtm, uint32_t out_bytes);
+-
+-void qtm_free(struct qtm_stream *qtm);
+-
+-/***************************************************************************
+- * LZX decompression definitions *
+- ***************************************************************************/
+-
+-/* some constants defined by the LZX specification */
+-#define LZX_MIN_MATCH (2)
+-#define LZX_MAX_MATCH (257)
+-#define LZX_NUM_CHARS (256)
+-#define LZX_BLOCKTYPE_INVALID (0) /* also blocktypes 4-7 invalid */
+-#define LZX_BLOCKTYPE_VERBATIM (1)
+-#define LZX_BLOCKTYPE_ALIGNED (2)
+-#define LZX_BLOCKTYPE_UNCOMPRESSED (3)
+-#define LZX_PRETREE_NUM_ELEMENTS (20)
+-#define LZX_ALIGNED_NUM_ELEMENTS (8) /* aligned offset tree #elements */
+-#define LZX_NUM_PRIMARY_LENGTHS (7) /* this one missing from spec! */
+-#define LZX_NUM_SECONDARY_LENGTHS (249) /* length tree #elements */
+-
+-/* LZX huffman defines: tweak tablebits as desired */
+-#define LZX_PRETREE_MAXSYMBOLS (LZX_PRETREE_NUM_ELEMENTS)
+-#define LZX_PRETREE_TABLEBITS (6)
+-#define LZX_MAINTREE_MAXSYMBOLS (LZX_NUM_CHARS + 50*8)
+-#define LZX_MAINTREE_TABLEBITS (12)
+-#define LZX_LENGTH_MAXSYMBOLS (LZX_NUM_SECONDARY_LENGTHS+1)
+-#define LZX_LENGTH_TABLEBITS (12)
+-#define LZX_ALIGNED_MAXSYMBOLS (LZX_ALIGNED_NUM_ELEMENTS)
+-#define LZX_ALIGNED_TABLEBITS (7)
+-#define LZX_LENTABLE_SAFETY (64) /* table decoding overruns are allowed */
+-
+-#define LZX_FRAME_SIZE (32768) /* the size of a frame in LZX */
+-
+-struct lzx_stream {
+- int ofd; /* output file descriptor */
+-
+- off_t offset; /* number of bytes actually output */
+- off_t length; /* overall decompressed length of stream */
+-
+- unsigned char *window; /* decoding window */
+- unsigned int window_size; /* window size */
+- unsigned int window_posn; /* decompression offset within window */
+- unsigned int frame_posn; /* current frame offset within in window */
+- unsigned int frame; /* the number of 32kb frames processed */
+- unsigned int reset_interval; /* which frame do we reset the compressor? */
+-
+- unsigned int R0, R1, R2; /* for the LRU offset system */
+- unsigned int block_length; /* uncompressed length of this LZX block */
+- unsigned int block_remaining; /* uncompressed bytes still left to decode */
+-
+- signed int intel_filesize; /* magic header value used for transform */
+- signed int intel_curpos; /* current offset in transform space */
+-
+- unsigned char intel_started; /* has intel E8 decoding started? */
+- unsigned char block_type; /* type of the current block */
+- unsigned char header_read; /* have we started decoding at all yet? */
+- unsigned char posn_slots; /* how many posn slots in stream? */
+-
+- int error;
+-
+- /* I/O buffering */
+- unsigned char *inbuf, *i_ptr, *i_end, *o_ptr, *o_end;
+- unsigned int bit_buffer, bits_left, inbuf_size;
+-
+- /* huffman code lengths */
+- unsigned char PRETREE_len [LZX_PRETREE_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
+- unsigned char MAINTREE_len [LZX_MAINTREE_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
+- unsigned char LENGTH_len [LZX_LENGTH_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
+- unsigned char ALIGNED_len [LZX_ALIGNED_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
+-
+- /* huffman decoding tables */
+- unsigned short PRETREE_table [(1 << LZX_PRETREE_TABLEBITS) +
+- (LZX_PRETREE_MAXSYMBOLS * 2)];
+- unsigned short MAINTREE_table[(1 << LZX_MAINTREE_TABLEBITS) +
+- (LZX_MAINTREE_MAXSYMBOLS * 2)];
+- unsigned short LENGTH_table [(1 << LZX_LENGTH_TABLEBITS) +
+- (LZX_LENGTH_MAXSYMBOLS * 2)];
+- unsigned short ALIGNED_table [(1 << LZX_ALIGNED_TABLEBITS) +
+- (LZX_ALIGNED_MAXSYMBOLS * 2)];
+- unsigned char input_end; /* have we reached the end of input? */
+- unsigned char wflag; /* write flag */
+-
+- /* this is used purely for doing the intel E8 transform */
+- unsigned char e8_buf[LZX_FRAME_SIZE];
+-
+- unsigned int position_base[51];
+-
+- /* cabinet related stuff */
+- struct cab_file *file;
+- int (*read_cb)(struct cab_file *, unsigned char *, int);
+-
+- unsigned char extra_bits[51];
+-
+-};
+-
+-struct lzx_stream *lzx_init(int ofd,
+- int window_bits,
+- int reset_interval,
+- int input_buffer_size,
+- off_t output_length,
+- struct cab_file *file,
+- int (*read_cb)(struct cab_file *, unsigned char *, int));
+-
+-extern void lzx_set_output_length(struct lzx_stream *lzx,
+- off_t output_length);
+-
+-extern int lzx_decompress(struct lzx_stream *lzx, uint32_t out_bytes);
+-
+-void lzx_free(struct lzx_stream *lzx);
+-
+-#endif
+diff --git a/libclamav/scanners.c b/libclamav/scanners.c
+index fa9063d08018..07a38eedc7a5 100644
+--- a/libclamav/scanners.c
++++ b/libclamav/scanners.c
+@@ -60,7 +60,7 @@
+ #include "vba_extract.h"
+ #include "msexpand.h"
+ #include "mbox.h"
+-#include "chmunpack.h"
++#include "libmspack.h"
+ #include "pe.h"
+ #include "elf.h"
+ #include "filetypes.h"
+@@ -73,8 +73,6 @@
+ #include "sis.h"
+ #include "pdf.h"
+ #include "str.h"
+-#include "mspack.h"
+-#include "cab.h"
+ #include "rtf.h"
+ #include "unarj.h"
+ #include "nsis/nulsft.h"
+@@ -853,82 +851,6 @@ static int cli_scanszdd(cli_ctx *ctx)
+ return ret;
+ }
+
+-static int cli_scanmscab(cli_ctx *ctx, off_t sfx_offset)
+-{
+- char *tempname;
+- int ret;
+- unsigned int files = 0;
+- struct cab_archive cab;
+- struct cab_file *file;
+- unsigned int corrupted_input;
+- unsigned int viruses_found = 0;
+-
+- cli_dbgmsg("in cli_scanmscab()\n");
+-
+- if((ret = cab_open(*ctx->fmap, sfx_offset, &cab)))
+- return ret;
+-
+- for(file = cab.files; file; file = file->next) {
+- files++;
+-
+- if(cli_matchmeta(ctx, file->name, 0, file->length, 0, files, 0, NULL) == CL_VIRUS) {
+- if (!SCAN_ALL) {
+- ret = CL_VIRUS;
+- break;
+- }
+- viruses_found++;
+- }
+-
+- if(ctx->engine->maxscansize && ctx->scansize >= ctx->engine->maxscansize) {
+- ret = CL_CLEAN;
+- break;
+- }
+-
+- if(!(tempname = cli_gentemp(ctx->engine->tmpdir))) {
+- ret = CL_EMEM;
+- break;
+- }
+-
+- if(ctx->engine->maxscansize && ctx->scansize + ctx->engine->maxfilesize >= ctx->engine->maxscansize)
+- file->max_size = ctx->engine->maxscansize - ctx->scansize;
+- else
+- file->max_size = ctx->engine->maxfilesize ? ctx->engine->maxfilesize : 0xffffffff;
+-
+- cli_dbgmsg("CAB: Extracting file %s to %s, size %u, max_size: %u\n", file->name, tempname, file->length, (unsigned int) file->max_size);
+- file->written_size = 0;
+- if((ret = cab_extract(file, tempname))) {
+- cli_dbgmsg("CAB: Failed to extract file: %s\n", cl_strerror(ret));
+- } else {
+- corrupted_input = ctx->corrupted_input;
+- if(file->length != file->written_size) {
+- cli_dbgmsg("CAB: Length from header %u but wrote %u bytes\n", (unsigned int) file->length, (unsigned int) file->written_size);
+- ctx->corrupted_input = 1;
+- }
+- ret = cli_scanfile(tempname, ctx);
+- ctx->corrupted_input = corrupted_input;
+- }
+- if(!ctx->engine->keeptmp) {
+- if (!access(tempname, R_OK) && cli_unlink(tempname)) {
+- free(tempname);
+- ret = CL_EUNLINK;
+- break;
+- }
+- }
+- free(tempname);
+- if(ret == CL_VIRUS) {
+- if (SCAN_ALL)
+- viruses_found++;
+- else
+- break;
+- }
+- }
+-
+- cab_free(&cab);
+- if (viruses_found)
+- return CL_VIRUS;
+- return ret;
+-}
+-
+ static int vba_scandata(const unsigned char *data, unsigned int len, cli_ctx *ctx)
+ {
+ struct cli_matcher *groot = ctx->engine->root[0];
+@@ -1568,72 +1490,6 @@ static int cli_scantar(cli_ctx *ctx, unsigned int posix)
+ return ret;
+ }
+
+-static int cli_scanmschm(cli_ctx *ctx)
+-{
+- int ret = CL_CLEAN, rc;
+- chm_metadata_t metadata;
+- char *dir;
+- unsigned int viruses_found = 0;
+-
+- cli_dbgmsg("in cli_scanmschm()\n");
+-
+- /* generate the temporary directory */
+- if(!(dir = cli_gentemp(ctx->engine->tmpdir)))
+- return CL_EMEM;
+-
+- if(mkdir(dir, 0700)) {
+- cli_dbgmsg("CHM: Can't create temporary directory %s\n", dir);
+- free(dir);
+- return CL_ETMPDIR;
+- }
+-
+- ret = cli_chm_open(dir, &metadata, ctx);
+- if (ret != CL_SUCCESS) {
+- if(!ctx->engine->keeptmp)
+- cli_rmdirs(dir);
+- free(dir);
+- cli_dbgmsg("CHM: Error: %s\n", cl_strerror(ret));
+- return ret;
+- }
+-
+- do {
+- ret = cli_chm_prepare_file(&metadata);
+- if (ret != CL_SUCCESS) {
+- break;
+- }
+- ret = cli_chm_extract_file(dir, &metadata, ctx);
+- if (ret == CL_SUCCESS) {
+- rc = cli_magic_scandesc(metadata.ofd, ctx);
+- close(metadata.ofd);
+- if (rc == CL_VIRUS) {
+- cli_dbgmsg("CHM: infected with %s\n", cli_get_last_virus(ctx));
+- if (SCAN_ALL)
+- viruses_found++;
+- else {
+- ret = CL_VIRUS;
+- break;
+- }
+- }
+- }
+-
+- } while(ret == CL_SUCCESS);
+-
+- cli_chm_close(&metadata);
+-
+- if(!ctx->engine->keeptmp)
+- cli_rmdirs(dir);
+-
+- free(dir);
+-
+- cli_dbgmsg("CHM: Exit code: %d\n", ret);
+- if (ret == CL_BREAK)
+- ret = CL_CLEAN;
+-
+- if (SCAN_ALL && viruses_found)
+- return CL_VIRUS;
+- return ret;
+-}
+-
+ static int cli_scanscrenc(cli_ctx *ctx)
+ {
+ char *tempname;
diff --git a/recipes-security/clamav/clamav-0.98.5/0008-Add-upstream-systemd-support-for-clamav-daemon-and-c.patch b/recipes-security/clamav/clamav-0.98.5/0008-Add-upstream-systemd-support-for-clamav-daemon-and-c.patch
new file mode 100644
index 0000000..2229296
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0008-Add-upstream-systemd-support-for-clamav-daemon-and-c.patch
@@ -0,0 +1,655 @@
+From d2564db5d3f50adc67474ffb22b0ee7027a82828 Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Mon, 11 Aug 2014 23:22:05 +0200
+Subject: Add upstream systemd support for clamav-daemon and clamav-freshclam.
+
+---
+ Makefile.am | 2 +-
+ clamd/Makefile.am | 4 ++
+ clamd/clamav-daemon.service.in | 17 ++++++
+ clamd/clamav-daemon.socket | 12 ++++
+ clamd/clamd.c | 102 +++++++++++++++++++++++++++-------
+ clamd/localserver.c | 34 ++++++++++++
+ clamd/server-th.c | 55 +++++++++++-------
+ clamd/tcpserver.c | 50 +++++++++++++++++
+ configure.ac | 3 +
+ freshclam/Makefile.am | 4 ++
+ freshclam/clamav-freshclam.service.in | 12 ++++
+ freshclam/freshclam.c | 39 +++++++++++--
+ m4/reorganization/libs/systemd.m4 | 18 ++++++
+ shared/misc.h | 8 +++
+ shared/optparser.c | 2 +-
+ 15 files changed, 318 insertions(+), 44 deletions(-)
+ create mode 100644 clamd/clamav-daemon.service.in
+ create mode 100644 clamd/clamav-daemon.socket
+ create mode 100644 freshclam/clamav-freshclam.service.in
+ create mode 100644 m4/reorganization/libs/systemd.m4
+
+diff --git a/Makefile.am b/Makefile.am
+index 2eecd94b668b..017d6327ff58 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -33,7 +33,7 @@ pkgconfig_DATA = libclamav.pc
+ # don't complain that configuration files and databases are not removed, this is intended
+ distuninstallcheck_listfiles = find . -type f ! -name clamd.conf ! -name freshclam.conf ! -name daily.cvd ! -name main.cvd -print
+ DISTCLEANFILES = target.h
+-DISTCHECK_CONFIGURE_FLAGS=--enable-milter --disable-clamav --enable-all-jit-targets --enable-llvm=yes
++DISTCHECK_CONFIGURE_FLAGS=--enable-milter --disable-clamav --enable-all-jit-targets --enable-llvm=yes --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
+ lcov:
+ ($(MAKE); cd unit_tests; $(MAKE) lcov)
+ quick-check:
+diff --git a/clamd/Makefile.am b/clamd/Makefile.am
+index 61bbd69d1133..edc133138e58 100644
+--- a/clamd/Makefile.am
++++ b/clamd/Makefile.am
+@@ -50,6 +50,10 @@ clamd_SOURCES = \
+
+ AM_CFLAGS=@WERR_CFLAGS@
+
++if INSTALL_SYSTEMD_UNITS
++systemdsystemunit_DATA = clamav-daemon.socket clamav-daemon.service
++endif
++
+ endif
+
+ LIBS = $(top_builddir)/libclamav/libclamav.la @CLAMD_LIBS@ @THREAD_LIBS@
+diff --git a/clamd/clamav-daemon.service.in b/clamd/clamav-daemon.service.in
+new file mode 100644
+index 000000000000..0a5d456a2b36
+--- /dev/null
++++ b/clamd/clamav-daemon.service.in
+@@ -0,0 +1,17 @@
++[Unit]
++Description=Clam AntiVirus userspace daemon
++Documentation=man:clamd(8) man:clamd.conf(5) http://www.clamav.net/lang/en/doc/
++Requires=clamav-daemon.socket
++# Check for database existence
++ConditionPathExistsGlob=@DBDIR@/main.{c[vl]d,inc}
++ConditionPathExistsGlob=@DBDIR@/daily.{c[vl]d,inc}
++
++[Service]
++ExecStart=@prefix@/sbin/clamd --foreground=true
++# Reload the database
++ExecReload=/bin/kill -USR2 $MAINPID
++StandardOutput=syslog
++
++[Install]
++WantedBy=multi-user.target
++Also=clamav-daemon.socket
+diff --git a/clamd/clamav-daemon.socket b/clamd/clamav-daemon.socket
+new file mode 100644
+index 000000000000..43a34cd36aad
+--- /dev/null
++++ b/clamd/clamav-daemon.socket
+@@ -0,0 +1,12 @@
++[Unit]
++Description=Socket for Clam AntiVirus userspace daemon
++Documentation=man:clamd(8) man:clamd.conf(5) http://www.clamav.net/lang/en/doc/
++
++[Socket]
++ListenStream=/run/clamav/clamd.ctl
++#ListenStream=127.0.0.1:1024
++ExecStartPost=/bin/chown -R clamav:clamav /run/clamav/
++ExecStopPost=/bin/rm /run/clamav/clamd.ctl
++
++[Install]
++WantedBy=sockets.target
+diff --git a/clamd/clamd.c b/clamd/clamd.c
+index 96204291f433..ec15eacc8c25 100644
+--- a/clamd/clamd.c
++++ b/clamd/clamd.c
+@@ -72,7 +72,7 @@
+ #include "scanner.h"
+
+ short debug_mode = 0, logok = 0;
+-short foreground = 0;
++short foreground = -1;
+ char hostid[37];
+
+ char *get_hostid(void *cbdata);
+@@ -160,6 +160,31 @@ int main(int argc, char **argv)
+ debug_mode = 1;
+ }
+
++ /* check foreground option from command line to override config file */
++ int j;
++ for(j = 0; j < argc; j += 1)
++ {
++ if ((memcmp(argv[j], "--foreground", 12) == 0) || (memcmp(argv[j], "-F", 2) == 0))
++ {
++ /* found */
++ break;
++ }
++ }
++
++ if (j < argc)
++ {
++ if(optget(opts, "Foreground")->enabled)
++ {
++ foreground = 1;
++ }
++ else
++ {
++ foreground = 0;
++ }
++ }
++
++ int num_fd = sd_listen_fds(0);
++
+ /* parse the config file */
+ cfgfile = optget(opts, "config-file")->strarg;
+ pt = strdup(cfgfile);
+@@ -295,7 +320,9 @@ int main(int argc, char **argv)
+ if(optget(opts, "LocalSocket")->enabled)
+ localsock = 1;
+
+- if(!tcpsock && !localsock) {
++ logg("#Received %d file descriptor(s) from systemd.\n", num_fd);
++
++ if(!tcpsock && !localsock && num_fd == 0) {
+ logg("!Please define server type (local and/or TCP).\n");
+ ret = 1;
+ break;
+@@ -577,7 +604,9 @@ int main(int argc, char **argv)
+ break;
+ }
+
+- if(tcpsock) {
++ if(tcpsock || num_fd > 0) {
++ int *t;
++
+ opt = optget(opts, "TCPAddr");
+ if (opt->enabled) {
+ int breakout = 0;
+@@ -604,7 +633,7 @@ int main(int argc, char **argv)
+ }
+ }
+ #ifndef _WIN32
+- if(localsock) {
++ if(localsock && num_fd == 0) {
+ int *t;
+ mode_t sock_mode, umsk = umask(0777); /* socket is created with 000 to avoid races */
+
+@@ -666,8 +695,43 @@ int main(int argc, char **argv)
+ nlsockets++;
+ }
+
++ /* check for local sockets passed by systemd */
++ if (num_fd > 0)
++ {
++ int *t;
++ t = realloc(lsockets, sizeof(int) * (nlsockets + 1));
++ if (!(t)) {
++ ret = 1;
++ break;
++ }
++ lsockets = t;
++
++ lsockets[nlsockets] = localserver(opts);
++ if (lsockets[nlsockets] == -1)
++ {
++ ret = 1;
++ break;
++ }
++ else if (lsockets[nlsockets] > 0)
++ {
++ nlsockets++;
++ }
++ }
++
+ /* fork into background */
+- if(!optget(opts, "Foreground")->enabled) {
++ if (foreground == -1)
++ {
++ if (optget(opts, "Foreground")->enabled)
++ {
++ foreground = 1;
++ }
++ else
++ {
++ foreground = 0;
++ }
++ }
++ if(foreground == 0)
++ {
+ #ifdef C_BSD
+ /* workaround for OpenBSD bug, see https://wwws.clamav.net/bugzilla/show_bug.cgi?id=885 */
+ for(ret=0;(unsigned int)ret<nlsockets;ret++) {
+@@ -701,8 +765,6 @@ int main(int argc, char **argv)
+ if(chdir("/") == -1)
+ logg("^Can't change current working directory to root\n");
+
+- } else {
+- foreground = 1;
+ }
+ #endif
+
+@@ -716,22 +778,24 @@ int main(int argc, char **argv)
+
+ } while (0);
+
+- logg("*Closing the main socket%s.\n", (nlsockets > 1) ? "s" : "");
+-
+- for (i = 0; i < nlsockets; i++) {
+- closesocket(lsockets[i]);
+- }
++ if (num_fd == 0)
++ {
++ logg("*Closing the main socket%s.\n", (nlsockets > 1) ? "s" : "");
+
++ for (i = 0; i < nlsockets; i++) {
++ closesocket(lsockets[i]);
++ }
+ #ifndef _WIN32
+- if(nlsockets && localsock) {
+- opt = optget(opts, "LocalSocket");
++ if(nlsockets && localsock) {
++ opt = optget(opts, "LocalSocket");
+
+- if(unlink(opt->strarg) == -1)
+- logg("!Can't unlink the socket file %s\n", opt->strarg);
+- else
+- logg("Socket file removed.\n");
+- }
++ if(unlink(opt->strarg) == -1)
++ logg("!Can't unlink the socket file %s\n", opt->strarg);
++ else
++ logg("Socket file removed.\n");
++ }
+ #endif
++ }
+
+ free(lsockets);
+
+diff --git a/clamd/localserver.c b/clamd/localserver.c
+index db07415212ad..d963efd244f5 100644
+--- a/clamd/localserver.c
++++ b/clamd/localserver.c
+@@ -39,6 +39,7 @@
+
+ #include "shared/optparser.h"
+ #include "shared/output.h"
++#include "shared/misc.h"
+
+ #include "others.h"
+ #include "server.h"
+@@ -60,6 +61,39 @@ int localserver(const struct optstruct *opts)
+ STATBUF foo;
+ char *estr;
+
++ int num_fd = sd_listen_fds(0);
++ if (num_fd > 2)
++ {
++ logg("!LOCAL: Received more than two file descriptors from systemd.\n");
++ return -1;
++ }
++ else if (num_fd > 0)
++ {
++ /* use socket passed by systemd */
++ int i;
++ for(i = 0; i < num_fd; i += 1)
++ {
++ sockfd = SD_LISTEN_FDS_START + i;
++ if (sd_is_socket(sockfd, AF_UNIX, SOCK_STREAM, 1) == 1)
++ {
++ /* correct socket */
++ break;
++ }
++ else
++ {
++ /* wrong socket */
++ sockfd = -2;
++ }
++ }
++ if (sockfd == -2)
++ {
++ logg("#LOCAL: No local AF_UNIX SOCK_STREAM socket received from systemd.\n");
++ return -2;
++ }
++ logg("#LOCAL: Received AF_UNIX SOCK_STREAM socket from systemd.\n");
++ return sockfd;
++ }
++ /* create socket */
+ memset((char *) &server, 0, sizeof(server));
+ server.sun_family = AF_UNIX;
+ strncpy(server.sun_path, optget(opts, "LocalSocket")->strarg, sizeof(server.sun_path));
+diff --git a/clamd/server-th.c b/clamd/server-th.c
+index d97cd6fb34e1..5c12811b662b 100644
+--- a/clamd/server-th.c
++++ b/clamd/server-th.c
+@@ -48,6 +48,7 @@
+
+ #include "shared/output.h"
+ #include "shared/optparser.h"
++#include "shared/misc.h"
+
+ #include "fan.h"
+ #include "server.h"
+@@ -445,13 +446,19 @@ static void *acceptloop_th(void *arg)
+ }
+ pthread_mutex_unlock(fds->buf_mutex);
+
+- for (i=0;i < fds->nfds; i++) {
+- if (fds->buf[i].fd == -1)
+- continue;
+- logg("$Shutdown: closed fd %d\n", fds->buf[i].fd);
+- shutdown(fds->buf[i].fd, 2);
+- closesocket(fds->buf[i].fd);
++ if (sd_listen_fds(0) == 0)
++ {
++ /* only close the sockets, when not using systemd socket activation */
++ for (i=0;i < fds->nfds; i++)
++ {
++ if (fds->buf[i].fd == -1)
++ continue;
++ logg("$Shutdown: closed fd %d\n", fds->buf[i].fd);
++ shutdown(fds->buf[i].fd, 2);
++ closesocket(fds->buf[i].fd);
++ }
+ }
++
+ fds_free(fds);
+ pthread_mutex_destroy(fds->buf_mutex);
+ pthread_mutex_lock(&exit_mutex);
+@@ -1344,16 +1351,22 @@ int recvloop_th(int *socketds, unsigned nsockets, struct cl_engine *engine, unsi
+ if (progexit) {
+ pthread_mutex_unlock(&exit_mutex);
+ pthread_mutex_lock(fds->buf_mutex);
+- for (i=0;i < fds->nfds; i++) {
+- if (fds->buf[i].fd == -1)
+- continue;
+- thrmgr_group_terminate(fds->buf[i].group);
+- if (thrmgr_group_finished(fds->buf[i].group, EXIT_ERROR)) {
+- logg("$Shutdown closed fd %d\n", fds->buf[i].fd);
+- shutdown(fds->buf[i].fd, 2);
+- closesocket(fds->buf[i].fd);
+- fds->buf[i].fd = -1;
+- }
++ if (sd_listen_fds(0) == 0)
++ {
++ /* only close the sockets, when not using systemd socket activation */
++ for (i=0;i < fds->nfds; i++)
++ {
++ if (fds->buf[i].fd == -1)
++ continue;
++ thrmgr_group_terminate(fds->buf[i].group);
++ if (thrmgr_group_finished(fds->buf[i].group, EXIT_ERROR))
++ {
++ logg("$Shutdown closed fd %d\n", fds->buf[i].fd);
++ shutdown(fds->buf[i].fd, 2);
++ closesocket(fds->buf[i].fd);
++ fds->buf[i].fd = -1;
++ }
++ }
+ }
+ pthread_mutex_unlock(fds->buf_mutex);
+ break;
+@@ -1462,9 +1475,13 @@ int recvloop_th(int *socketds, unsigned nsockets, struct cl_engine *engine, unsi
+ #endif
+ if(dbstat.entries)
+ cl_statfree(&dbstat);
+- logg("*Shutting down the main socket%s.\n", (nsockets > 1) ? "s" : "");
+- for (i = 0; i < nsockets; i++)
+- shutdown(socketds[i], 2);
++ if (sd_listen_fds(0) == 0)
++ {
++ /* only close the sockets, when not using systemd socket activation */
++ logg("*Shutting down the main socket%s.\n", (nsockets > 1) ? "s" : "");
++ for (i = 0; i < nsockets; i++)
++ shutdown(socketds[i], 2);
++ }
+
+ if((opt = optget(opts, "PidFile"))->enabled) {
+ if(unlink(opt->strarg) == -1)
+diff --git a/clamd/tcpserver.c b/clamd/tcpserver.c
+index c3027a85c1f4..81387b3c8512 100644
+--- a/clamd/tcpserver.c
++++ b/clamd/tcpserver.c
+@@ -60,6 +60,56 @@ int tcpserver(int **lsockets, unsigned int *nlsockets, char *ipaddr, const struc
+
+ sockets = *lsockets;
+
++ int num_fd = sd_listen_fds(0);
++ if (num_fd > 2)
++ {
++ logg("!TCP: Received more than two file descriptors from systemd.\n");
++ return -1;
++ }
++ else if (num_fd > 0)
++ {
++ /* use socket passed by systemd */
++ int i;
++ for(i = 0; i < num_fd; i += 1)
++ {
++ sockfd = SD_LISTEN_FDS_START + i;
++ if (sd_is_socket(sockfd, AF_INET, SOCK_STREAM, 1) == 1)
++ {
++ /* correct socket */
++ logg("#TCP: Received AF_INET SOCK_STREAM socket from systemd.\n");
++ break;
++ }
++ else if (sd_is_socket(sockfd, AF_INET6, SOCK_STREAM, 1) == 1)
++ {
++ /* correct socket */
++ logg("#TCP: Received AF_INET6 SOCK_STREAM socket from systemd.\n");
++ break;
++ }
++ else
++ {
++ /* wrong socket */
++ sockfd = -2;
++ }
++ }
++ if (sockfd == -2)
++ {
++ logg("#TCP: No tcp AF_INET/AF_INET6 SOCK_STREAM socket received from systemd.\n");
++ return -2;
++ }
++
++ t = realloc(sockets, sizeof(int) * (*nlsockets + 1));
++ if (!(t)) {
++ return -1;
++ }
++ sockets = t;
++
++ sockets[*nlsockets] = sockfd;
++ (*nlsockets)++;
++ *lsockets = sockets;
++ return 0;
++ }
++
++ /* create socket */
+ snprintf(port, sizeof(port), "%lld", optget(opts, "TCPSocket")->numarg);
+
+ memset(&hints, 0x00, sizeof(struct addrinfo));
+diff --git a/configure.ac b/configure.ac
+index 41043753fc92..02caad29410a 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -86,6 +86,7 @@ AM_MAINTAINER_MODE
+ m4_include([m4/reorganization/libs/libz.m4])
+ m4_include([m4/reorganization/libs/bzip.m4])
+ m4_include([m4/reorganization/libs/unrar.m4])
++m4_include([m4/reorganization/libs/systemd.m4])
+ m4_include([m4/reorganization/code_checks/ipv6.m4])
+ m4_include([m4/reorganization/code_checks/dns.m4])
+ m4_include([m4/reorganization/code_checks/fanotify.m4])
+@@ -137,9 +138,11 @@ clamscan/Makefile
+ database/Makefile
+ docs/Makefile
+ clamd/Makefile
++clamd/clamav-daemon.service
+ clamdscan/Makefile
+ clamsubmit/Makefile
+ clamav-milter/Makefile
++freshclam/clamav-freshclam.service
+ freshclam/Makefile
+ sigtool/Makefile
+ clamconf/Makefile
+diff --git a/freshclam/Makefile.am b/freshclam/Makefile.am
+index 58fc17471c35..051bf3380e98 100644
+--- a/freshclam/Makefile.am
++++ b/freshclam/Makefile.am
+@@ -49,6 +49,10 @@ freshclam_SOURCES = \
+ mirman.c \
+ mirman.h
+
++if INSTALL_SYSTEMD_UNITS
++systemdsystemunit_DATA = clamav-freshclam.service
++endif
++
+ AM_CFLAGS=@WERR_CFLAGS@
+ DEFS = @DEFS@ -DCL_NOTHREADS
+ AM_CPPFLAGS = @SSL_CPPFLAGS@ -I$(top_srcdir) -I$(top_srcdir)/shared -I$(top_srcdir)/libclamav @FRESHCLAM_CPPFLAGS@ @JSON_CPPFLAGS@
+diff --git a/freshclam/clamav-freshclam.service.in b/freshclam/clamav-freshclam.service.in
+new file mode 100644
+index 000000000000..f717cd642106
+--- /dev/null
++++ b/freshclam/clamav-freshclam.service.in
+@@ -0,0 +1,12 @@
++[Unit]
++Description=ClamAV virus database updater
++Documentation=man:freshclam(1) man:freshclam.conf(5) http://www.clamav.net/lang/en/doc/
++# If user wants it run from cron, don't start the daemon.
++ConditionPathExists=!/etc/cron.d/clamav-freshclam
++
++[Service]
++ExecStart=@prefix@/bin/freshclam -d --foreground=true
++StandardOutput=syslog
++
++[Install]
++WantedBy=multi-user.target
+diff --git a/freshclam/freshclam.c b/freshclam/freshclam.c
+index 166586bf6447..f170613877c4 100644
+--- a/freshclam/freshclam.c
++++ b/freshclam/freshclam.c
+@@ -64,7 +64,7 @@
+ static short terminate = 0;
+ extern int active_children;
+
+-static short foreground = 1;
++static short foreground = -1;
+ char updtmpdir[512], dbdir[512];
+ int sigchld_wait = 1;
+ const char *pidfile = NULL;
+@@ -117,7 +117,7 @@ sighandler (int sig)
+ if (pidfile)
+ unlink (pidfile);
+ logg ("Update process terminated\n");
+- exit (2);
++ exit (0);
+ }
+
+ return;
+@@ -322,6 +322,26 @@ main (int argc, char **argv)
+ return 0;
+ }
+
++ /* check foreground option from command line to override config file */
++ int j;
++ for(j = 0; j < argc; j += 1)
++ {
++ if ((memcmp(argv[j], "--foreground", 12) == 0) || (memcmp(argv[j], "-F", 2) == 0))
++ {
++ /* found */
++ break;
++ }
++ }
++
++ if (j < argc) {
++ if(optget(opts, "Foreground")->enabled) {
++ foreground = 1;
++ }
++ else {
++ foreground = 0;
++ }
++ }
++
+ /* parse the config file */
+ cfgfile = optget (opts, "config-file")->strarg;
+ pt = strdup (cfgfile);
+@@ -638,7 +658,19 @@ main (int argc, char **argv)
+ bigsleep = 24 * 3600 / checks;
+
+ #ifndef _WIN32
+- if (!optget (opts, "Foreground")->enabled)
++ /* fork into background */
++ if (foreground == -1)
++ {
++ if (optget(opts, "Foreground")->enabled)
++ {
++ foreground = 1;
++ }
++ else
++ {
++ foreground = 0;
++ }
++ }
++ if(foreground == 0)
+ {
+ if (daemonize () == -1)
+ {
+@@ -646,7 +678,6 @@ main (int argc, char **argv)
+ optfree (opts);
+ return FCE_FAILEDUPDATE;
+ }
+- foreground = 0;
+ mprintf_disabled = 1;
+ }
+ #endif
+diff --git a/m4/reorganization/libs/systemd.m4 b/m4/reorganization/libs/systemd.m4
+new file mode 100644
+index 000000000000..cac5d4272fda
+--- /dev/null
++++ b/m4/reorganization/libs/systemd.m4
+@@ -0,0 +1,18 @@
++dnl Check for systemd-daemon
++PKG_CHECK_MODULES(SYSTEMD, [libsystemd-daemon], [AC_DEFINE([HAVE_SYSTEMD],,[systemd-daemon is supported])], [AC_MSG_RESULT([systemd-daemon is not supported])])
++CLAMD_LIBS="$CLAMD_LIBS $SYSTEMD_LIBS"
++CFLAGS="$CFLAGS $SYSTEMD_CFLAGS"
++
++dnl Check for systemd system unit installation directory (see man 7 daemon)
++AC_ARG_WITH([systemdsystemunitdir], AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),, [with_systemdsystemunitdir=auto])
++AS_IF([test "x$with_systemdsystemunitdir" = "xyes" -o "x$with_systemdsystemunitdir" = "xauto"], [
++ def_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)
++ AS_IF([test "x$def_systemdsystemunitdir" = "x"],
++ [AS_IF([test "x$with_systemdsystemunitdir" = "xyes"], [AC_MSG_ERROR([systemd support requested but pkg-config unable to query systemd package])])
++ with_systemdsystemunitdir=no],
++ [with_systemdsystemunitdir=$def_systemdsystemunitdir])])
++AS_IF([test "x$with_systemdsystemunitdir" != "xno"],
++ [AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])])
++AM_CONDITIONAL(INSTALL_SYSTEMD_UNITS, [test "x$with_systemdsystemunitdir" != "xno"])
++AC_MSG_RESULT([checking for systemd system unit installation directory... $with_systemdsystemunitdir])
++
+diff --git a/shared/misc.h b/shared/misc.h
+index 7f3a9f962d0d..3e093936caa1 100644
+--- a/shared/misc.h
++++ b/shared/misc.h
+@@ -37,6 +37,14 @@
+ # endif
+ #endif
+
++#ifdef HAVE_SYSTEMD
++# include <systemd/sd-daemon.h>
++#else
++# define sd_listen_fds(u) 0
++# define SD_LISTEN_FDS_START 3
++# define sd_is_socket(f, a, s, l) 1
++#endif
++
+ #include <limits.h>
+
+ #ifndef PATH_MAX
+diff --git a/shared/optparser.c b/shared/optparser.c
+index 63c88550d5b8..b61ec832a32f 100644
+--- a/shared/optparser.c
++++ b/shared/optparser.c
+@@ -272,7 +272,7 @@ const struct clam_option __clam_options[] = {
+
+ { "AllowAllMatchScan", NULL, 0, CLOPT_TYPE_BOOL, MATCH_BOOL, 1, NULL, 0, OPT_CLAMD, "Permit use of the ALLMATCHSCAN command.", "yes" },
+
+- { "Foreground", NULL, 0, CLOPT_TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_FRESHCLAM | OPT_MILTER, "Don't fork into background.", "no" },
++ { "Foreground", "foreground", 'F', CLOPT_TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_FRESHCLAM | OPT_MILTER, "Don't fork into background.", "no" },
+
+ { "Debug", NULL, 0, CLOPT_TYPE_BOOL, MATCH_BOOL, 0, NULL, 0, OPT_CLAMD | OPT_FRESHCLAM, "Enable debug messages in libclamav.", "no" },
+
diff --git a/recipes-security/clamav/clamav-0.98.5/0009-fix-ssize_t-size_t-off_t-printf-modifier.patch b/recipes-security/clamav/clamav-0.98.5/0009-fix-ssize_t-size_t-off_t-printf-modifier.patch
new file mode 100644
index 0000000..ee60f92
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0009-fix-ssize_t-size_t-off_t-printf-modifier.patch
@@ -0,0 +1,478 @@
+From 26516ebe7ae678be78e748bc973835844e369f72 Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Sun, 17 Aug 2014 21:24:03 +0200
+Subject: fix ssize_t/size_t/off_t printf modifier
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes a segfault on ARM, Sparc, … if 64bit off_t is used. Once LFS
+is enabled then off_t becomes 64bit and there is no portable way to express
+it except to cast the variable to signed long long. However with LFS
+enabled we can spare that cast.
+The 32bit Architectures may explode here because the earlier 64bit off_t
+consumes two argument slots and the filename (on which glibc uses
+strlen()) becomes invalid.
+
+In brief:
+ssize_t -> %zd
+size_t -> %zu
+off_t -> %llu (with LFS enabled)
+
+https://bugzilla.clamav.net/show_bug.cgi?id=11092
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ clamd/clamd.c | 2 +-
+ clamd/server-th.c | 3 ++-
+ libclamav/adc.c | 5 +++--
+ libclamav/asn1.c | 3 ++-
+ libclamav/bytecode.c | 4 ++--
+ libclamav/bytecode_api.c | 2 +-
+ libclamav/hashtab.c | 32 +++++++++++++++++++++-----------
+ libclamav/jsparse/js-norm.c | 6 ++++--
+ libclamav/matcher.c | 6 ++++--
+ libclamav/pdf.c | 29 +++++++++++++++++++----------
+ libclamav/regex_list.c | 5 ++++-
+ libclamav/scanners.c | 5 +++--
+ shared/misc.h | 4 ++++
+ shared/output.c | 3 ++-
+ sigtool/sigtool.c | 3 ++-
+ 15 files changed, 74 insertions(+), 38 deletions(-)
+
+diff --git a/clamd/clamd.c b/clamd/clamd.c
+index ec15eacc8c25..8c87e1bb9a87 100644
+--- a/clamd/clamd.c
++++ b/clamd/clamd.c
+@@ -355,7 +355,7 @@ int main(int argc, char **argv)
+
+
+ if(logg_size)
+- logg("#Log file size limited to %u bytes.\n", logg_size);
++ logg("#Log file size limited to %" PRId64 "bytes.\n", logg_size);
+ else
+ logg("#Log file size limit disabled.\n");
+
+diff --git a/clamd/server-th.c b/clamd/server-th.c
+index 5c12811b662b..84086f39fbfb 100644
+--- a/clamd/server-th.c
++++ b/clamd/server-th.c
+@@ -689,7 +689,8 @@ static int handle_stream(client_conn_t *conn, struct fd_buf *buf, const struct o
+ logg("!INSTREAM: Can't write to temporary file.\n");
+ *error = 1;
+ }
+- logg("$Processed %lu bytes of chunkdata, pos %lu\n", cmdlen, pos);
++ logg("$Processed %" _sizet " bytes of chunkdata, pos %" _sizet "\n",
++ cmdlen, pos);
+ pos += cmdlen;
+ if (pos == buf->off) {
+ buf->off = 0;
+diff --git a/libclamav/adc.c b/libclamav/adc.c
+index 6ad00ea96571..684335f1bfb5 100644
+--- a/libclamav/adc.c
++++ b/libclamav/adc.c
+@@ -28,6 +28,7 @@
+ #include <string.h>
+ #endif
+
++#include "shared/misc.h"
+ #include "clamav.h"
+ #include "cltypes.h"
+ #include "others.h"
+@@ -86,8 +87,8 @@ int adc_decompress(adc_stream *strm)
+ return ADC_DATA_ERROR;
+ }
+
+- cli_dbgmsg("adc_decompress: avail_in %lu avail_out %lu state %u\n", strm->avail_in, strm->avail_out, strm->state);
+-
++ cli_dbgmsg("adc_decompress: avail_in %" _sizet " avail_out %" _sizet " state %u\n",
++ strm->avail_in, strm->avail_out, strm->state);
+ while (strm->avail_out) {
+ /* Exit if needs more in bytes and none available */
+ int needsInput;
+diff --git a/libclamav/asn1.c b/libclamav/asn1.c
+index c6cf0dd00c50..e6f55642640d 100644
+--- a/libclamav/asn1.c
++++ b/libclamav/asn1.c
+@@ -24,6 +24,7 @@
+
+ #include <time.h>
+
++#include "shared/misc.h"
+ #include "clamav.h"
+ #include "asn1.h"
+ #include "bignum.h"
+@@ -1481,7 +1482,7 @@ int asn1_check_mscat(struct cl_engine *engine, fmap_t *map, size_t offset, unsig
+ if (engine->dconf->pe & PE_CONF_DISABLECERT)
+ return CL_VIRUS;
+
+- cli_dbgmsg("in asn1_check_mscat (offset: %lu)\n", offset);
++ cli_dbgmsg("in asn1_check_mscat (offset: %" _sizet ")\n", offset);
+ crtmgr_init(&certs);
+ if(crtmgr_add_roots(engine, &certs)) {
+ crtmgr_free(&certs);
+diff --git a/libclamav/bytecode.c b/libclamav/bytecode.c
+index 28d2d716f93b..b34f818fdaba 100644
+--- a/libclamav/bytecode.c
++++ b/libclamav/bytecode.c
+@@ -1489,8 +1489,8 @@ void cli_sigperf_print()
+ cli_infomsg (NULL, "%-*s %*s %*s %*s %*s\n", max_name_len, "=============",
+ 8, "=====", 8, "========", 12, "===========", 9, "=========");
+ while (elem->run_count) {
+- cli_infomsg (NULL, "%-*s %*lu %*lu %*llu %*.2f\n", max_name_len, elem->bc_name,
+- 8, elem->run_count, 8, elem->match_count,
++ cli_infomsg (NULL, "%-*s %*lu %*lu %*" PRIu64 " %*.2f\n", max_name_len,
++ elem->bc_name, 8, elem->run_count, 8, elem->match_count,
+ 12, elem->usecs, 9, (double)elem->usecs/elem->run_count);
+ elem++;
+ }
+diff --git a/libclamav/bytecode_api.c b/libclamav/bytecode_api.c
+index 5bded4ebaca0..72a9393183a2 100644
+--- a/libclamav/bytecode_api.c
++++ b/libclamav/bytecode_api.c
+@@ -122,7 +122,7 @@ int32_t cli_bcapi_seek(struct cli_bc_ctx* ctx, int32_t pos, uint32_t whence)
+ return -1;
+ }
+ if (off < 0 || off > ctx->file_size) {
+- cli_dbgmsg("bcapi_seek: out of file: %ld (max %d)\n",
++ cli_dbgmsg("bcapi_seek: out of file: %" PRId64 " (max %d)\n",
+ off, ctx->file_size);
+ return -1;
+ }
+diff --git a/libclamav/hashtab.c b/libclamav/hashtab.c
+index 88e81ba2c2ef..cafce3ac8927 100644
+--- a/libclamav/hashtab.c
++++ b/libclamav/hashtab.c
+@@ -25,6 +25,7 @@
+ #include <stdio.h>
+ #include <string.h>
+
++#include "shared/misc.h"
+ #include "cltypes.h"
+ #include "clamav.h"
+ #include "others.h"
+@@ -329,9 +330,10 @@ static int cli_hashtab_grow(struct cli_hashtable *s)
+ struct cli_element* htable;
+ size_t i,idx, used = 0;
+
+- cli_dbgmsg("hashtab.c: new capacity: %lu\n",new_capacity);
++ cli_dbgmsg("hashtab.c: new capacity: %" _sizet "\n",new_capacity);
+ if(new_capacity == s->capacity) {
+- cli_errmsg("hashtab.c: capacity problem growing from: %lu\n",s->capacity);
++ cli_errmsg("hashtab.c: capacity problem growing from: %" _sizet
++ "\n", s->capacity);
+ return CL_EMEM;
+ }
+ htable = cli_calloc(new_capacity, sizeof(*s->htable));
+@@ -372,7 +374,7 @@ static int cli_hashtab_grow(struct cli_hashtable *s)
+ s->used = used;
+ s->capacity = new_capacity;
+ s->maxfill = new_capacity*8/10;
+- cli_dbgmsg("Table %p size after grow:%ld\n",(void*)s,s->capacity);
++ cli_dbgmsg("Table %p size after grow: %" _sizet "\n", s, s->capacity);
+ PROFILE_GROW_DONE(s);
+ return CL_SUCCESS;
+ }
+@@ -386,7 +388,7 @@ static int cli_htu32_grow(struct cli_htu32 *s, mpool_t *mempool)
+ const size_t new_capacity = nearest_power(s->capacity + 1);
+ struct cli_htu32_element* htable = mpool_calloc(mempool, new_capacity, sizeof(*s->htable));
+ size_t i,idx, used = 0;
+- cli_dbgmsg("hashtab.c: new capacity: %lu\n",new_capacity);
++ cli_dbgmsg("hashtab.c: new capacity: %" _sizet "\n", new_capacity);
+ if(new_capacity == s->capacity || !htable)
+ return CL_EMEM;
+
+@@ -422,7 +424,7 @@ static int cli_htu32_grow(struct cli_htu32 *s, mpool_t *mempool)
+ s->used = used;
+ s->capacity = new_capacity;
+ s->maxfill = new_capacity*8/10;
+- cli_dbgmsg("Table %p size after grow:%ld\n",(void*)s,s->capacity);
++ cli_dbgmsg("Table %p size after grow: %" _sizet "\n", s, s->capacity);
+ PROFILE_GROW_DONE(s);
+ return CL_SUCCESS;
+ }
+@@ -437,7 +439,9 @@ const struct cli_element* cli_hashtab_insert(struct cli_hashtable *s, const char
+ if(!s)
+ return NULL;
+ if(s->used > s->maxfill) {
+- cli_dbgmsg("hashtab.c:Growing hashtable %p, because it has exceeded maxfill, old size:%ld\n",(void*)s,s->capacity);
++ cli_dbgmsg("hashtab.c:Growing hashtable %p, because it has "
++ "exceeded maxfill, old size: %" _sizet "\n", s,
++ s->capacity);
+ cli_hashtab_grow(s);
+ }
+ do {
+@@ -486,7 +490,8 @@ const struct cli_element* cli_hashtab_insert(struct cli_hashtable *s, const char
+ } while (tries <= s->capacity);
+ /* no free place found*/
+ PROFILE_HASH_EXHAUSTED(s);
+- cli_dbgmsg("hashtab.c: Growing hashtable %p, because its full, old size:%ld.\n",(void*)s,s->capacity);
++ cli_dbgmsg("hashtab.c: Growing hashtable %p, because its full, "
++ "old size: %" _sizet ".\n", s, s->capacity);
+ } while( cli_hashtab_grow(s) >= 0 );
+ cli_warnmsg("hashtab.c: Unable to grow hashtable\n");
+ return NULL;
+@@ -504,7 +509,9 @@ int cli_htu32_insert(struct cli_htu32 *s, const struct cli_htu32_element *item,
+ if(!s)
+ return CL_ENULLARG;
+ if(s->used > s->maxfill) {
+- cli_dbgmsg("hashtab.c:Growing hashtable %p, because it has exceeded maxfill, old size:%ld\n",(void*)s,s->capacity);
++ cli_dbgmsg("hashtab.c:Growing hashtable %p, because it has "
++ "exceeded maxfill, old size: %" _sizet "\n", s,
++ s->capacity);
+ cli_htu32_grow(s, mempool);
+ }
+ do {
+@@ -543,7 +550,8 @@ int cli_htu32_insert(struct cli_htu32 *s, const struct cli_htu32_element *item,
+ } while (tries <= s->capacity);
+ /* no free place found*/
+ PROFILE_HASH_EXHAUSTED(s);
+- cli_dbgmsg("hashtab.c: Growing hashtable %p, because its full, old size:%ld.\n",(void*)s,s->capacity);
++ cli_dbgmsg("hashtab.c: Growing hashtable %p, because its full, "
++ "old size: %" _sizet ".\n", s, s->capacity);
+ } while( (ret = cli_htu32_grow(s, mempool)) >= 0 );
+ cli_warnmsg("hashtab.c: Unable to grow hashtable\n");
+ return ret;
+@@ -632,11 +640,13 @@ int cli_hashtab_generate_c(const struct cli_hashtable *s,const char* name)
+ else if(e->key == DELETED_KEY)
+ printf("\t{DELETED_KEY,0,0},\n");
+ else
+- printf("\t{\"%s\", %ld, %ld},\n", e->key, e->data, e->len);
++ printf("\t{\"%s\", %ld, %" _sizet"},\n", e->key,
++ e->data, e->len);
+ }
+ printf("};\n");
+ printf("const struct cli_hashtable %s = {\n",name);
+- printf("\t%s_elements, %ld, %ld, %ld", name, s->capacity, s->used, s->maxfill);
++ printf("\t%s_elements, %" _sizet ", %" _sizet" , %" _sizet, name,
++ s->capacity, s->used, s->maxfill);
+ printf("\n};\n");
+
+ PROFILE_REPORT(s);
+diff --git a/libclamav/jsparse/js-norm.c b/libclamav/jsparse/js-norm.c
+index 85eba72c2e87..9a56aa34856f 100644
+--- a/libclamav/jsparse/js-norm.c
++++ b/libclamav/jsparse/js-norm.c
+@@ -34,6 +34,7 @@
+ #include <ctype.h>
+ #include <assert.h>
+
++#include "shared/misc.h"
+ #include "clamav.h"
+ #include "cltypes.h"
+ #include "jsparse/lexglobal.h"
+@@ -525,7 +526,8 @@ static int replace_token_range(struct tokens *dst, size_t start, size_t end, con
+ {
+ const size_t len = with ? with->cnt : 0;
+ size_t i;
+- cli_dbgmsg(MODULE "Replacing tokens %lu - %lu with %lu tokens\n",start, end, len);
++ cli_dbgmsg(MODULE "Replacing tokens %" _sizet " - %" _sizet " with %"
++ _sizet " tokens\n", start, end, len);
+ if(start >= dst->cnt || end > dst->cnt)
+ return -1;
+ for(i=start;i<end;i++) {
+@@ -547,7 +549,7 @@ static int append_tokens(struct tokens *dst, const struct tokens *src)
+ return CL_ENULLARG;
+ if(tokens_ensure_capacity(dst, dst->cnt + src->cnt))
+ return CL_EMEM;
+- cli_dbgmsg(MODULE "Appending %lu tokens\n", src->cnt);
++ cli_dbgmsg(MODULE "Appending %" _sizet " tokens\n", src->cnt);
+ memcpy(&dst->data[dst->cnt], src->data, src->cnt * sizeof(dst->data[0]));
+ dst->cnt += src->cnt;
+ return CL_SUCCESS;
+diff --git a/libclamav/matcher.c b/libclamav/matcher.c
+index 3f4f5c1659d5..e684f7122e26 100644
+--- a/libclamav/matcher.c
++++ b/libclamav/matcher.c
+@@ -52,6 +52,7 @@
+ #include "perflogging.h"
+ #include "bytecode_priv.h"
+ #include "bytecode_api_impl.h"
++#include "shared/misc.h"
+
+ #ifdef CLI_PERF_LOGGING
+
+@@ -1069,8 +1070,9 @@ int cli_matchmeta(cli_ctx *ctx, const char *fname, size_t fsizec, size_t fsizer,
+ const struct cli_cdb *cdb;
+ unsigned int viruses_found = 0;
+
+- cli_dbgmsg("CDBNAME:%s:%lu:%s:%lu:%lu:%d:%u:%u:%p\n",
+- cli_ftname(ctx->container_type), fsizec, fname, fsizec, fsizer, encrypted, filepos, res1, res2);
++ cli_dbgmsg("CDBNAME:%s:%" _sizet ":%s:%" _sizet ":%" _sizet ":%d:%u:%u:%p\n",
++ cli_ftname(ctx->container_type), fsizec, fname, fsizec, fsizer,
++ encrypted, filepos, res1, res2);
+
+ if (ctx->engine && ctx->engine->cb_meta)
+ if (ctx->engine->cb_meta(cli_ftname(ctx->container_type), fsizec, fname, fsizer, encrypted, filepos, ctx->cb_ctx) == CL_VIRUS) {
+diff --git a/libclamav/pdf.c b/libclamav/pdf.c
+index 2e469c1e5d56..2de348e7c3fd 100644
+--- a/libclamav/pdf.c
++++ b/libclamav/pdf.c
+@@ -60,6 +60,7 @@
+ #include "rijndael.h"
+ #include "textnorm.h"
+ #include "json_api.h"
++#include "shared/misc.h"
+
+ #ifdef CL_DEBUG
+ /*#define SAVE_TMP
+@@ -1019,10 +1020,12 @@ int pdf_extract_obj(struct pdf_struct *pdf, struct pdf_obj *obj, uint32_t flags)
+
+ orig_length = length;
+ if (length > pdf->size || obj->start + p_stream + length > pdf->size) {
+- cli_dbgmsg("cli_pdf: length out of file: %ld + %ld > %ld\n",
+- p_stream, length, pdf->size);
+- noisy_warnmsg("length out of file, truncated: %ld + %ld > %ld\n",
+- p_stream, length, pdf->size);
++ cli_dbgmsg("cli_pdf: length out of file: %" PRId64 " + %"
++ PRId64 " > % " PRId64 "\n", p_stream,
++ length, pdf->size);
++ noisy_warnmsg("length out of file, truncated: %" PRId64
++ " + %" PRId64 " > %" PRId64 "\n",
++ p_stream, length, pdf->size);
+ length = pdf->size - (obj->start + p_stream);
+ }
+
+@@ -1044,17 +1047,21 @@ int pdf_extract_obj(struct pdf_struct *pdf, struct pdf_obj *obj, uint32_t flags)
+ if (length < 0)
+ length = 0;
+
+- cli_dbgmsg("cli_pdf: calculated length %ld\n", length);
++ cli_dbgmsg("cli_pdf: calculated length %" PRId64 "\n",
++ length);
+ } else {
+ if (size > (size_t)length+2) {
+- cli_dbgmsg("cli_pdf: calculated length %ld < %ld\n",
++ cli_dbgmsg("cli_pdf: calculated length %" PRId64 " < %"
++ _ssizet "\n",
+ length, size);
+ length = size;
+ }
+ }
+
+ if (orig_length && size > (size_t)orig_length + 20) {
+- cli_dbgmsg("cli_pdf: orig length: %ld, length: %ld, size: %ld\n", orig_length, length, size);
++ cli_dbgmsg("cli_pdf: orig length: %" PRId64 ", length: %"
++ PRId64", size: %" _ssizet "\n", orig_length,
++ length, size);
+ pdfobj_flag(pdf, obj, BAD_STREAMLEN);
+ }
+
+@@ -1240,7 +1247,7 @@ int pdf_extract_obj(struct pdf_struct *pdf, struct pdf_obj *obj, uint32_t flags)
+ }
+ } while (0);
+
+- cli_dbgmsg("cli_pdf: extracted %ld bytes %u %u obj to %s\n", sum, obj->id>>8, obj->id&0xff, fullname);
++ cli_dbgmsg("cli_pdf: extracted %" PRId64 " bytes %u %u obj to %p\n", sum, obj->id>>8, obj->id&0xff, fullname);
+
+ if (flags & PDF_EXTRACT_OBJ_SCAN && sum) {
+ int rc2;
+@@ -2493,7 +2500,8 @@ int cli_pdf(const char *dir, cli_ctx *ctx, off_t offset)
+
+ if (pdfver != start || offset) {
+ pdf.flags |= 1 << BAD_PDF_HEADERPOS;
+- cli_dbgmsg("cli_pdf: PDF header is not at position 0: %ld\n",pdfver-start+offset);
++ cli_dbgmsg("cli_pdf: PDF header is not at position 0: %" PRId64 "\n",
++ pdfver - start + offset);
+ #if HAVE_JSON
+ if (pdfobj)
+ cli_jsonbool(pdfobj, "BadVersionLocation", 1);
+@@ -2602,7 +2610,8 @@ int cli_pdf(const char *dir, cli_ctx *ctx, off_t offset)
+ while ((rc = pdf_findobj(&pdf)) > 0) {
+ struct pdf_obj *obj = &pdf.objs[pdf.nobjs-1];
+
+- cli_dbgmsg("cli_pdf: found %d %d obj @%ld\n", obj->id >> 8, obj->id&0xff, obj->start + offset);
++ cli_dbgmsg("cli_pdf: found %d %d obj @%" PRId64 "\n", obj->id >> 8,
++ obj->id & 0xff, obj->start + offset);
+ }
+
+ if (pdf.nobjs)
+diff --git a/libclamav/regex_list.c b/libclamav/regex_list.c
+index f30cc4cd4349..4b27c2974fb6 100644
+--- a/libclamav/regex_list.c
++++ b/libclamav/regex_list.c
+@@ -41,6 +41,7 @@
+ #include <assert.h>
+
+ #include "regex/regex.h"
++#include "shared/misc.h"
+
+ #include "clamav.h"
+ #include "others.h"
+@@ -84,7 +85,9 @@ static inline size_t get_char_at_pos_with_skip(const struct pre_fixup_info* info
+ return (pos <= strlen(buffer)) ? buffer[pos>0 ? pos-1:0] : '\0';
+ }
+ str = info->pre_displayLink.data;
+- cli_dbgmsg("calc_pos_with_skip: skip:%lu, %lu - %lu \"%s\",\"%s\"\n", pos, info->host_start, info->host_end, str, buffer);
++ cli_dbgmsg("calc_pos_with_skip: skip: %" _sizet ", %" _sizet " - %"
++ _sizet " \"%s\",\"%s\"\n", pos, info->host_start,
++ info->host_end, str, buffer);
+ pos += info->host_start;
+ while(str[realpos] && !isalnum(str[realpos])) realpos++;
+ for(; str[realpos] && (pos>0); pos--) {
+diff --git a/libclamav/scanners.c b/libclamav/scanners.c
+index 07a38eedc7a5..49cd70a18d9e 100644
+--- a/libclamav/scanners.c
++++ b/libclamav/scanners.c
+@@ -49,6 +49,7 @@
+ #define DCONF_MAIL ctx->dconf->mail
+ #define DCONF_OTHER ctx->dconf->other
+
++#include "shared/misc.h"
+ #include "clamav.h"
+ #include "others.h"
+ #include "dconf.h"
+@@ -3171,8 +3172,8 @@ int cli_map_scandesc(cl_fmap_t *map, off_t offset, size_t length, cli_ctx *ctx,
+
+ if (!length) length = old_len - offset;
+ if (length > old_len - offset) {
+- cli_dbgmsg("Data truncated: %lu -> %lu\n",
+- (unsigned long)length, old_len - offset);
++ cli_dbgmsg("Data truncated: %" _sizet" -> %" PRIu64" \n", length,
++ old_len - offset);
+ length = old_len - offset;
+ }
+
+diff --git a/shared/misc.h b/shared/misc.h
+index 3e093936caa1..65f8c9ce0382 100644
+--- a/shared/misc.h
++++ b/shared/misc.h
+@@ -51,6 +51,10 @@
+ #define PATH_MAX 1024
+ #endif
+
++#include <inttypes.h>
++#define _sizet "zu"
++#define _ssizet "zd"
++
+ char *freshdbdir(void);
+ void print_version(const char *dbdir);
+ int check_flevel(void);
+diff --git a/shared/output.c b/shared/output.c
+index 5e947a57a6f9..ab054a8bbeee 100644
+--- a/shared/output.c
++++ b/shared/output.c
+@@ -214,7 +214,8 @@ static int rename_logg(STATBUF *sb)
+
+ if (!logg_rotate) {
+ if (logg_fp) {
+- fprintf(logg_fp, "Log size = %zu, max = %zu\n", sb->st_size, logg_size);
++ fprintf(logg_fp, "Log size = %" PRId64 ", max = %" PRId64 "\n",
++ sb->st_size, logg_size);
+ fprintf(logg_fp, "WARNING: Log size limit met but log file rotation turned off. Forcing log file rotation anyways.\n");
+ }
+
+diff --git a/sigtool/sigtool.c b/sigtool/sigtool.c
+index f2135c210e02..d67e662cfea1 100644
+--- a/sigtool/sigtool.c
++++ b/sigtool/sigtool.c
+@@ -373,7 +373,8 @@ static char *getdsig(const char *host, const char *user, const unsigned char *da
+ closesocket(sockd);
+ return NULL;
+ } else {
+- mprintf("Signature received (length = %lu)\n", (unsigned long)strlen(buff) - 10);
++ mprintf("Signature received (length = %" _sizet ")\n",
++ (unsigned long)strlen(buff) - 10);
+ }
+ } else {
+ mprintf("!getdsig: Communication error with remote server\n");
diff --git a/recipes-security/clamav/clamav-0.98.5/0010-hardcode-LLVM-linker-flag-because-llvm-config-return.patch b/recipes-security/clamav/clamav-0.98.5/0010-hardcode-LLVM-linker-flag-because-llvm-config-return.patch
new file mode 100644
index 0000000..9699b50
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0010-hardcode-LLVM-linker-flag-because-llvm-config-return.patch
@@ -0,0 +1,26 @@
+From 86ebd6e3f8fa60d0bdbed10eb10c5a7699b821e4 Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Mon, 25 Aug 2014 22:54:37 +0200
+Subject: hardcode LLVM linker flag, because llvm-config returns only flags for
+ linking statically
+
+this reduces the size of libclamav by more than 80 percent
+---
+ libclamav/c++/configure.ac | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/libclamav/c++/configure.ac b/libclamav/c++/configure.ac
+index a6697ddd8e82..3c7c7e26fbf8 100644
+--- a/libclamav/c++/configure.ac
++++ b/libclamav/c++/configure.ac
+@@ -121,8 +121,8 @@ if test "x$llvmconfig" != "x"; then
+ else
+ AC_SUBST(LLVMCONFIG_LDFLAGS, [`$llvmconfig --ldflags`])
+ fi
+- AC_SUBST(LLVMCONFIG_LIBS, [`$llvmconfig --libs jit nativecodegen scalaropts ipo`])
+- AC_SUBST(LLVMCONFIG_LIBFILES, [`$llvmconfig --libfiles jit nativecodegen scalaropts ipo`])
++ AC_SUBST(LLVMCONFIG_LIBS, [-lLLVM-$llvmver])
++ AC_SUBST(LLVMCONFIG_LIBFILES, [])
+ AC_MSG_NOTICE([CXXFLAGS from llvm-config: $LLVMCONFIG_CXXFLAGS])
+ AC_MSG_NOTICE([LDFLAGS from llvm-config: $LLVMCONFIG_LDFLAGS])
+ AC_MSG_NOTICE([LIBS from llvm-config: $LLVMCONFIG_LIBS])
diff --git a/recipes-security/clamav/clamav-0.98.5/0011-Add-libmspack-library-from-upstream-without-unnecess.patch b/recipes-security/clamav/clamav-0.98.5/0011-Add-libmspack-library-from-upstream-without-unnecess.patch
new file mode 100644
index 0000000..b6df9c2
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0011-Add-libmspack-library-from-upstream-without-unnecess.patch
@@ -0,0 +1,56090 @@
+From e61759267dd586ead646ac7717edf73cf04fe4f3 Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Wed, 30 Jul 2014 21:01:09 +0200
+Subject: Add libmspack library from upstream without unnecessary files
+
+this is from http://www.cabextract.org.uk/libmspack/libmspack-0.4alpha.tar.gz
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ libclamav/libmspack-0.4alpha/AUTHORS | 12 +
+ libclamav/libmspack-0.4alpha/COPYING.LIB | 504 +
+ libclamav/libmspack-0.4alpha/ChangeLog | 491 +
+ libclamav/libmspack-0.4alpha/INSTALL | 370 +
+ libclamav/libmspack-0.4alpha/Makefile.am | 100 +
+ libclamav/libmspack-0.4alpha/Makefile.in | 1371 ++
+ libclamav/libmspack-0.4alpha/NEWS | 0
+ libclamav/libmspack-0.4alpha/README | 130 +
+ libclamav/libmspack-0.4alpha/TODO | 8 +
+ libclamav/libmspack-0.4alpha/aclocal.m4 | 1033 ++
+ libclamav/libmspack-0.4alpha/config.guess | 1530 +++
+ libclamav/libmspack-0.4alpha/config.h.in | 113 +
+ libclamav/libmspack-0.4alpha/config.sub | 1773 +++
+ libclamav/libmspack-0.4alpha/configure | 14567 ++++++++++++++++++++++
+ libclamav/libmspack-0.4alpha/configure.ac | 50 +
+ libclamav/libmspack-0.4alpha/depcomp | 688 +
+ libclamav/libmspack-0.4alpha/install-sh | 520 +
+ libclamav/libmspack-0.4alpha/libmspack.pc.in | 10 +
+ libclamav/libmspack-0.4alpha/ltmain.sh | 9661 ++++++++++++++
+ libclamav/libmspack-0.4alpha/m4/libtool.m4 | 8001 ++++++++++++
+ libclamav/libmspack-0.4alpha/m4/ltoptions.m4 | 384 +
+ libclamav/libmspack-0.4alpha/m4/ltsugar.m4 | 123 +
+ libclamav/libmspack-0.4alpha/m4/ltversion.m4 | 23 +
+ libclamav/libmspack-0.4alpha/m4/lt~obsolete.m4 | 98 +
+ libclamav/libmspack-0.4alpha/missing | 331 +
+ libclamav/libmspack-0.4alpha/mspack/cab.h | 127 +
+ libclamav/libmspack-0.4alpha/mspack/cabc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/cabd.c | 1444 +++
+ libclamav/libmspack-0.4alpha/mspack/chm.h | 122 +
+ libclamav/libmspack-0.4alpha/mspack/chmc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/chmd.c | 1392 +++
+ libclamav/libmspack-0.4alpha/mspack/crc32.c | 95 +
+ libclamav/libmspack-0.4alpha/mspack/crc32.h | 17 +
+ libclamav/libmspack-0.4alpha/mspack/des.h | 15 +
+ libclamav/libmspack-0.4alpha/mspack/hlp.h | 33 +
+ libclamav/libmspack-0.4alpha/mspack/hlpc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/hlpd.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/kwaj.h | 118 +
+ libclamav/libmspack-0.4alpha/mspack/kwajc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/kwajd.c | 561 +
+ libclamav/libmspack-0.4alpha/mspack/lit.h | 35 +
+ libclamav/libmspack-0.4alpha/mspack/litc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/litd.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/lzss.h | 66 +
+ libclamav/libmspack-0.4alpha/mspack/lzssd.c | 93 +
+ libclamav/libmspack-0.4alpha/mspack/lzx.h | 221 +
+ libclamav/libmspack-0.4alpha/mspack/lzxc.c | 18 +
+ libclamav/libmspack-0.4alpha/mspack/lzxd.c | 895 ++
+ libclamav/libmspack-0.4alpha/mspack/mspack.h | 2353 ++++
+ libclamav/libmspack-0.4alpha/mspack/mszip.h | 126 +
+ libclamav/libmspack-0.4alpha/mspack/mszipc.c | 18 +
+ libclamav/libmspack-0.4alpha/mspack/mszipd.c | 514 +
+ libclamav/libmspack-0.4alpha/mspack/oab.h | 60 +
+ libclamav/libmspack-0.4alpha/mspack/oabc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/oabd.c | 408 +
+ libclamav/libmspack-0.4alpha/mspack/qtm.h | 128 +
+ libclamav/libmspack-0.4alpha/mspack/qtmd.c | 489 +
+ libclamav/libmspack-0.4alpha/mspack/readbits.h | 207 +
+ libclamav/libmspack-0.4alpha/mspack/readhuff.h | 173 +
+ libclamav/libmspack-0.4alpha/mspack/sha.h | 15 +
+ libclamav/libmspack-0.4alpha/mspack/system.c | 239 +
+ libclamav/libmspack-0.4alpha/mspack/system.h | 124 +
+ libclamav/libmspack-0.4alpha/mspack/szdd.h | 39 +
+ libclamav/libmspack-0.4alpha/mspack/szddc.c | 24 +
+ libclamav/libmspack-0.4alpha/mspack/szddd.c | 247 +
+ libclamav/libmspack-0.4alpha/test/cabd_md5.c | 161 +
+ libclamav/libmspack-0.4alpha/test/cabd_memory.c | 179 +
+ libclamav/libmspack-0.4alpha/test/cabd_test.c | 386 +
+ libclamav/libmspack-0.4alpha/test/cabrip.c | 81 +
+ libclamav/libmspack-0.4alpha/test/chmd_find.c | 95 +
+ libclamav/libmspack-0.4alpha/test/chmd_md5.c | 67 +
+ libclamav/libmspack-0.4alpha/test/chmd_order.c | 144 +
+ libclamav/libmspack-0.4alpha/test/chminfo.c | 284 +
+ libclamav/libmspack-0.4alpha/test/chmx.c | 216 +
+ libclamav/libmspack-0.4alpha/test/error.h | 22 +
+ libclamav/libmspack-0.4alpha/test/expand.c | 79 +
+ libclamav/libmspack-0.4alpha/test/md5.c | 457 +
+ libclamav/libmspack-0.4alpha/test/md5.h | 165 +
+ libclamav/libmspack-0.4alpha/test/md5_fh.h | 123 +
+ libclamav/libmspack-0.4alpha/test/multifh.c | 435 +
+ libclamav/libmspack-0.4alpha/test/oabx.c | 41 +
+ 81 files changed, 55434 insertions(+)
+ create mode 100644 libclamav/libmspack-0.4alpha/AUTHORS
+ create mode 100644 libclamav/libmspack-0.4alpha/COPYING.LIB
+ create mode 100644 libclamav/libmspack-0.4alpha/ChangeLog
+ create mode 100644 libclamav/libmspack-0.4alpha/INSTALL
+ create mode 100644 libclamav/libmspack-0.4alpha/Makefile.am
+ create mode 100644 libclamav/libmspack-0.4alpha/Makefile.in
+ create mode 100644 libclamav/libmspack-0.4alpha/NEWS
+ create mode 100644 libclamav/libmspack-0.4alpha/README
+ create mode 100644 libclamav/libmspack-0.4alpha/TODO
+ create mode 100644 libclamav/libmspack-0.4alpha/aclocal.m4
+ create mode 100755 libclamav/libmspack-0.4alpha/config.guess
+ create mode 100644 libclamav/libmspack-0.4alpha/config.h.in
+ create mode 100755 libclamav/libmspack-0.4alpha/config.sub
+ create mode 100755 libclamav/libmspack-0.4alpha/configure
+ create mode 100644 libclamav/libmspack-0.4alpha/configure.ac
+ create mode 100755 libclamav/libmspack-0.4alpha/depcomp
+ create mode 100755 libclamav/libmspack-0.4alpha/install-sh
+ create mode 100644 libclamav/libmspack-0.4alpha/libmspack.pc.in
+ create mode 100644 libclamav/libmspack-0.4alpha/ltmain.sh
+ create mode 100644 libclamav/libmspack-0.4alpha/m4/libtool.m4
+ create mode 100644 libclamav/libmspack-0.4alpha/m4/ltoptions.m4
+ create mode 100644 libclamav/libmspack-0.4alpha/m4/ltsugar.m4
+ create mode 100644 libclamav/libmspack-0.4alpha/m4/ltversion.m4
+ create mode 100644 libclamav/libmspack-0.4alpha/m4/lt~obsolete.m4
+ create mode 100755 libclamav/libmspack-0.4alpha/missing
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/cab.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/cabc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/cabd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/chm.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/chmc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/chmd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/crc32.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/crc32.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/des.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/hlp.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/hlpc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/hlpd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/kwaj.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/kwajc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/kwajd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/lit.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/litc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/litd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/lzss.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/lzssd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/lzx.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/lzxc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/lzxd.c
+ create mode 100755 libclamav/libmspack-0.4alpha/mspack/mspack.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/mszip.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/mszipc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/mszipd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/oab.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/oabc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/oabd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/qtm.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/qtmd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/readbits.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/readhuff.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/sha.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/system.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/system.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/szdd.h
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/szddc.c
+ create mode 100644 libclamav/libmspack-0.4alpha/mspack/szddd.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/cabd_md5.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/cabd_memory.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/cabd_test.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/cabrip.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/chmd_find.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/chmd_md5.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/chmd_order.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/chminfo.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/chmx.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/error.h
+ create mode 100644 libclamav/libmspack-0.4alpha/test/expand.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/md5.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/md5.h
+ create mode 100644 libclamav/libmspack-0.4alpha/test/md5_fh.h
+ create mode 100644 libclamav/libmspack-0.4alpha/test/multifh.c
+ create mode 100644 libclamav/libmspack-0.4alpha/test/oabx.c
+
+diff --git a/libclamav/libmspack-0.4alpha/AUTHORS b/libclamav/libmspack-0.4alpha/AUTHORS
+new file mode 100644
+index 000000000000..be28722a8075
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/AUTHORS
+@@ -0,0 +1,12 @@
++Principal author: Stuart Caie
++
++Based on specification documents from Microsoft Corporation and PKWARE.
++
++Contributors:
++- LZX compressor by Matthew Russotto
++- Quantum decompressor by Matthew Russotto
++- old inflate decompressor by Dirk Stoecker / InfoZIP team
++- Huffman table builder adapted from unlzx by Dave Tritscher
++- LZX decompressor fixes by Jae Jung and Igor Glucksmann
++- Debianisation by Markus Sinner
++- Quantum decompressor fix by Larry Frieson
+diff --git a/libclamav/libmspack-0.4alpha/COPYING.LIB b/libclamav/libmspack-0.4alpha/COPYING.LIB
+new file mode 100644
+index 000000000000..b1e3f5a26387
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/COPYING.LIB
+@@ -0,0 +1,504 @@
++ GNU LESSER GENERAL PUBLIC LICENSE
++ Version 2.1, February 1999
++
++ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
++ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ Everyone is permitted to copy and distribute verbatim copies
++ of this license document, but changing it is not allowed.
++
++[This is the first released version of the Lesser GPL. It also counts
++ as the successor of the GNU Library Public License, version 2, hence
++ the version number 2.1.]
++
++ Preamble
++
++ The licenses for most software are designed to take away your
++freedom to share and change it. By contrast, the GNU General Public
++Licenses are intended to guarantee your freedom to share and change
++free software--to make sure the software is free for all its users.
++
++ This license, the Lesser General Public License, applies to some
++specially designated software packages--typically libraries--of the
++Free Software Foundation and other authors who decide to use it. You
++can use it too, but we suggest you first think carefully about whether
++this license or the ordinary General Public License is the better
++strategy to use in any particular case, based on the explanations below.
++
++ When we speak of free software, we are referring to freedom of use,
++not price. Our General Public Licenses are designed to make sure that
++you have the freedom to distribute copies of free software (and charge
++for this service if you wish); that you receive source code or can get
++it if you want it; that you can change the software and use pieces of
++it in new free programs; and that you are informed that you can do
++these things.
++
++ To protect your rights, we need to make restrictions that forbid
++distributors to deny you these rights or to ask you to surrender these
++rights. These restrictions translate to certain responsibilities for
++you if you distribute copies of the library or if you modify it.
++
++ For example, if you distribute copies of the library, whether gratis
++or for a fee, you must give the recipients all the rights that we gave
++you. You must make sure that they, too, receive or can get the source
++code. If you link other code with the library, you must provide
++complete object files to the recipients, so that they can relink them
++with the library after making changes to the library and recompiling
++it. And you must show them these terms so they know their rights.
++
++ We protect your rights with a two-step method: (1) we copyright the
++library, and (2) we offer you this license, which gives you legal
++permission to copy, distribute and/or modify the library.
++
++ To protect each distributor, we want to make it very clear that
++there is no warranty for the free library. Also, if the library is
++modified by someone else and passed on, the recipients should know
++that what they have is not the original version, so that the original
++author's reputation will not be affected by problems that might be
++introduced by others.
++
++ Finally, software patents pose a constant threat to the existence of
++any free program. We wish to make sure that a company cannot
++effectively restrict the users of a free program by obtaining a
++restrictive license from a patent holder. Therefore, we insist that
++any patent license obtained for a version of the library must be
++consistent with the full freedom of use specified in this license.
++
++ Most GNU software, including some libraries, is covered by the
++ordinary GNU General Public License. This license, the GNU Lesser
++General Public License, applies to certain designated libraries, and
++is quite different from the ordinary General Public License. We use
++this license for certain libraries in order to permit linking those
++libraries into non-free programs.
++
++ When a program is linked with a library, whether statically or using
++a shared library, the combination of the two is legally speaking a
++combined work, a derivative of the original library. The ordinary
++General Public License therefore permits such linking only if the
++entire combination fits its criteria of freedom. The Lesser General
++Public License permits more lax criteria for linking other code with
++the library.
++
++ We call this license the "Lesser" General Public License because it
++does Less to protect the user's freedom than the ordinary General
++Public License. It also provides other free software developers Less
++of an advantage over competing non-free programs. These disadvantages
++are the reason we use the ordinary General Public License for many
++libraries. However, the Lesser license provides advantages in certain
++special circumstances.
++
++ For example, on rare occasions, there may be a special need to
++encourage the widest possible use of a certain library, so that it becomes
++a de-facto standard. To achieve this, non-free programs must be
++allowed to use the library. A more frequent case is that a free
++library does the same job as widely used non-free libraries. In this
++case, there is little to gain by limiting the free library to free
++software only, so we use the Lesser General Public License.
++
++ In other cases, permission to use a particular library in non-free
++programs enables a greater number of people to use a large body of
++free software. For example, permission to use the GNU C Library in
++non-free programs enables many more people to use the whole GNU
++operating system, as well as its variant, the GNU/Linux operating
++system.
++
++ Although the Lesser General Public License is Less protective of the
++users' freedom, it does ensure that the user of a program that is
++linked with the Library has the freedom and the wherewithal to run
++that program using a modified version of the Library.
++
++ The precise terms and conditions for copying, distribution and
++modification follow. Pay close attention to the difference between a
++"work based on the library" and a "work that uses the library". The
++former contains code derived from the library, whereas the latter must
++be combined with the library in order to run.
++
++ GNU LESSER GENERAL PUBLIC LICENSE
++ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
++
++ 0. This License Agreement applies to any software library or other
++program which contains a notice placed by the copyright holder or
++other authorized party saying it may be distributed under the terms of
++this Lesser General Public License (also called "this License").
++Each licensee is addressed as "you".
++
++ A "library" means a collection of software functions and/or data
++prepared so as to be conveniently linked with application programs
++(which use some of those functions and data) to form executables.
++
++ The "Library", below, refers to any such software library or work
++which has been distributed under these terms. A "work based on the
++Library" means either the Library or any derivative work under
++copyright law: that is to say, a work containing the Library or a
++portion of it, either verbatim or with modifications and/or translated
++straightforwardly into another language. (Hereinafter, translation is
++included without limitation in the term "modification".)
++
++ "Source code" for a work means the preferred form of the work for
++making modifications to it. For a library, complete source code means
++all the source code for all modules it contains, plus any associated
++interface definition files, plus the scripts used to control compilation
++and installation of the library.
++
++ Activities other than copying, distribution and modification are not
++covered by this License; they are outside its scope. The act of
++running a program using the Library is not restricted, and output from
++such a program is covered only if its contents constitute a work based
++on the Library (independent of the use of the Library in a tool for
++writing it). Whether that is true depends on what the Library does
++and what the program that uses the Library does.
++
++ 1. You may copy and distribute verbatim copies of the Library's
++complete source code as you receive it, in any medium, provided that
++you conspicuously and appropriately publish on each copy an
++appropriate copyright notice and disclaimer of warranty; keep intact
++all the notices that refer to this License and to the absence of any
++warranty; and distribute a copy of this License along with the
++Library.
++
++ You may charge a fee for the physical act of transferring a copy,
++and you may at your option offer warranty protection in exchange for a
++fee.
++
++ 2. You may modify your copy or copies of the Library or any portion
++of it, thus forming a work based on the Library, and copy and
++distribute such modifications or work under the terms of Section 1
++above, provided that you also meet all of these conditions:
++
++ a) The modified work must itself be a software library.
++
++ b) You must cause the files modified to carry prominent notices
++ stating that you changed the files and the date of any change.
++
++ c) You must cause the whole of the work to be licensed at no
++ charge to all third parties under the terms of this License.
++
++ d) If a facility in the modified Library refers to a function or a
++ table of data to be supplied by an application program that uses
++ the facility, other than as an argument passed when the facility
++ is invoked, then you must make a good faith effort to ensure that,
++ in the event an application does not supply such function or
++ table, the facility still operates, and performs whatever part of
++ its purpose remains meaningful.
++
++ (For example, a function in a library to compute square roots has
++ a purpose that is entirely well-defined independent of the
++ application. Therefore, Subsection 2d requires that any
++ application-supplied function or table used by this function must
++ be optional: if the application does not supply it, the square
++ root function must still compute square roots.)
++
++These requirements apply to the modified work as a whole. If
++identifiable sections of that work are not derived from the Library,
++and can be reasonably considered independent and separate works in
++themselves, then this License, and its terms, do not apply to those
++sections when you distribute them as separate works. But when you
++distribute the same sections as part of a whole which is a work based
++on the Library, the distribution of the whole must be on the terms of
++this License, whose permissions for other licensees extend to the
++entire whole, and thus to each and every part regardless of who wrote
++it.
++
++Thus, it is not the intent of this section to claim rights or contest
++your rights to work written entirely by you; rather, the intent is to
++exercise the right to control the distribution of derivative or
++collective works based on the Library.
++
++In addition, mere aggregation of another work not based on the Library
++with the Library (or with a work based on the Library) on a volume of
++a storage or distribution medium does not bring the other work under
++the scope of this License.
++
++ 3. You may opt to apply the terms of the ordinary GNU General Public
++License instead of this License to a given copy of the Library. To do
++this, you must alter all the notices that refer to this License, so
++that they refer to the ordinary GNU General Public License, version 2,
++instead of to this License. (If a newer version than version 2 of the
++ordinary GNU General Public License has appeared, then you can specify
++that version instead if you wish.) Do not make any other change in
++these notices.
++
++ Once this change is made in a given copy, it is irreversible for
++that copy, so the ordinary GNU General Public License applies to all
++subsequent copies and derivative works made from that copy.
++
++ This option is useful when you wish to copy part of the code of
++the Library into a program that is not a library.
++
++ 4. You may copy and distribute the Library (or a portion or
++derivative of it, under Section 2) in object code or executable form
++under the terms of Sections 1 and 2 above provided that you accompany
++it with the complete corresponding machine-readable source code, which
++must be distributed under the terms of Sections 1 and 2 above on a
++medium customarily used for software interchange.
++
++ If distribution of object code is made by offering access to copy
++from a designated place, then offering equivalent access to copy the
++source code from the same place satisfies the requirement to
++distribute the source code, even though third parties are not
++compelled to copy the source along with the object code.
++
++ 5. A program that contains no derivative of any portion of the
++Library, but is designed to work with the Library by being compiled or
++linked with it, is called a "work that uses the Library". Such a
++work, in isolation, is not a derivative work of the Library, and
++therefore falls outside the scope of this License.
++
++ However, linking a "work that uses the Library" with the Library
++creates an executable that is a derivative of the Library (because it
++contains portions of the Library), rather than a "work that uses the
++library". The executable is therefore covered by this License.
++Section 6 states terms for distribution of such executables.
++
++ When a "work that uses the Library" uses material from a header file
++that is part of the Library, the object code for the work may be a
++derivative work of the Library even though the source code is not.
++Whether this is true is especially significant if the work can be
++linked without the Library, or if the work is itself a library. The
++threshold for this to be true is not precisely defined by law.
++
++ If such an object file uses only numerical parameters, data
++structure layouts and accessors, and small macros and small inline
++functions (ten lines or less in length), then the use of the object
++file is unrestricted, regardless of whether it is legally a derivative
++work. (Executables containing this object code plus portions of the
++Library will still fall under Section 6.)
++
++ Otherwise, if the work is a derivative of the Library, you may
++distribute the object code for the work under the terms of Section 6.
++Any executables containing that work also fall under Section 6,
++whether or not they are linked directly with the Library itself.
++
++ 6. As an exception to the Sections above, you may also combine or
++link a "work that uses the Library" with the Library to produce a
++work containing portions of the Library, and distribute that work
++under terms of your choice, provided that the terms permit
++modification of the work for the customer's own use and reverse
++engineering for debugging such modifications.
++
++ You must give prominent notice with each copy of the work that the
++Library is used in it and that the Library and its use are covered by
++this License. You must supply a copy of this License. If the work
++during execution displays copyright notices, you must include the
++copyright notice for the Library among them, as well as a reference
++directing the user to the copy of this License. Also, you must do one
++of these things:
++
++ a) Accompany the work with the complete corresponding
++ machine-readable source code for the Library including whatever
++ changes were used in the work (which must be distributed under
++ Sections 1 and 2 above); and, if the work is an executable linked
++ with the Library, with the complete machine-readable "work that
++ uses the Library", as object code and/or source code, so that the
++ user can modify the Library and then relink to produce a modified
++ executable containing the modified Library. (It is understood
++ that the user who changes the contents of definitions files in the
++ Library will not necessarily be able to recompile the application
++ to use the modified definitions.)
++
++ b) Use a suitable shared library mechanism for linking with the
++ Library. A suitable mechanism is one that (1) uses at run time a
++ copy of the library already present on the user's computer system,
++ rather than copying library functions into the executable, and (2)
++ will operate properly with a modified version of the library, if
++ the user installs one, as long as the modified version is
++ interface-compatible with the version that the work was made with.
++
++ c) Accompany the work with a written offer, valid for at
++ least three years, to give the same user the materials
++ specified in Subsection 6a, above, for a charge no more
++ than the cost of performing this distribution.
++
++ d) If distribution of the work is made by offering access to copy
++ from a designated place, offer equivalent access to copy the above
++ specified materials from the same place.
++
++ e) Verify that the user has already received a copy of these
++ materials or that you have already sent this user a copy.
++
++ For an executable, the required form of the "work that uses the
++Library" must include any data and utility programs needed for
++reproducing the executable from it. However, as a special exception,
++the materials to be distributed need not include anything that is
++normally distributed (in either source or binary form) with the major
++components (compiler, kernel, and so on) of the operating system on
++which the executable runs, unless that component itself accompanies
++the executable.
++
++ It may happen that this requirement contradicts the license
++restrictions of other proprietary libraries that do not normally
++accompany the operating system. Such a contradiction means you cannot
++use both them and the Library together in an executable that you
++distribute.
++
++ 7. You may place library facilities that are a work based on the
++Library side-by-side in a single library together with other library
++facilities not covered by this License, and distribute such a combined
++library, provided that the separate distribution of the work based on
++the Library and of the other library facilities is otherwise
++permitted, and provided that you do these two things:
++
++ a) Accompany the combined library with a copy of the same work
++ based on the Library, uncombined with any other library
++ facilities. This must be distributed under the terms of the
++ Sections above.
++
++ b) Give prominent notice with the combined library of the fact
++ that part of it is a work based on the Library, and explaining
++ where to find the accompanying uncombined form of the same work.
++
++ 8. You may not copy, modify, sublicense, link with, or distribute
++the Library except as expressly provided under this License. Any
++attempt otherwise to copy, modify, sublicense, link with, or
++distribute the Library is void, and will automatically terminate your
++rights under this License. However, parties who have received copies,
++or rights, from you under this License will not have their licenses
++terminated so long as such parties remain in full compliance.
++
++ 9. You are not required to accept this License, since you have not
++signed it. However, nothing else grants you permission to modify or
++distribute the Library or its derivative works. These actions are
++prohibited by law if you do not accept this License. Therefore, by
++modifying or distributing the Library (or any work based on the
++Library), you indicate your acceptance of this License to do so, and
++all its terms and conditions for copying, distributing or modifying
++the Library or works based on it.
++
++ 10. Each time you redistribute the Library (or any work based on the
++Library), the recipient automatically receives a license from the
++original licensor to copy, distribute, link with or modify the Library
++subject to these terms and conditions. You may not impose any further
++restrictions on the recipients' exercise of the rights granted herein.
++You are not responsible for enforcing compliance by third parties with
++this License.
++
++ 11. If, as a consequence of a court judgment or allegation of patent
++infringement or for any other reason (not limited to patent issues),
++conditions are imposed on you (whether by court order, agreement or
++otherwise) that contradict the conditions of this License, they do not
++excuse you from the conditions of this License. If you cannot
++distribute so as to satisfy simultaneously your obligations under this
++License and any other pertinent obligations, then as a consequence you
++may not distribute the Library at all. For example, if a patent
++license would not permit royalty-free redistribution of the Library by
++all those who receive copies directly or indirectly through you, then
++the only way you could satisfy both it and this License would be to
++refrain entirely from distribution of the Library.
++
++If any portion of this section is held invalid or unenforceable under any
++particular circumstance, the balance of the section is intended to apply,
++and the section as a whole is intended to apply in other circumstances.
++
++It is not the purpose of this section to induce you to infringe any
++patents or other property right claims or to contest validity of any
++such claims; this section has the sole purpose of protecting the
++integrity of the free software distribution system which is
++implemented by public license practices. Many people have made
++generous contributions to the wide range of software distributed
++through that system in reliance on consistent application of that
++system; it is up to the author/donor to decide if he or she is willing
++to distribute software through any other system and a licensee cannot
++impose that choice.
++
++This section is intended to make thoroughly clear what is believed to
++be a consequence of the rest of this License.
++
++ 12. If the distribution and/or use of the Library is restricted in
++certain countries either by patents or by copyrighted interfaces, the
++original copyright holder who places the Library under this License may add
++an explicit geographical distribution limitation excluding those countries,
++so that distribution is permitted only in or among countries not thus
++excluded. In such case, this License incorporates the limitation as if
++written in the body of this License.
++
++ 13. The Free Software Foundation may publish revised and/or new
++versions of the Lesser General Public License from time to time.
++Such new versions will be similar in spirit to the present version,
++but may differ in detail to address new problems or concerns.
++
++Each version is given a distinguishing version number. If the Library
++specifies a version number of this License which applies to it and
++"any later version", you have the option of following the terms and
++conditions either of that version or of any later version published by
++the Free Software Foundation. If the Library does not specify a
++license version number, you may choose any version ever published by
++the Free Software Foundation.
++
++ 14. If you wish to incorporate parts of the Library into other free
++programs whose distribution conditions are incompatible with these,
++write to the author to ask for permission. For software which is
++copyrighted by the Free Software Foundation, write to the Free
++Software Foundation; we sometimes make exceptions for this. Our
++decision will be guided by the two goals of preserving the free status
++of all derivatives of our free software and of promoting the sharing
++and reuse of software generally.
++
++ NO WARRANTY
++
++ 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
++WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
++EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
++OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
++KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
++IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
++LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
++THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
++
++ 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
++WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
++AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
++FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
++CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
++LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
++RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
++FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
++SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
++DAMAGES.
++
++ END OF TERMS AND CONDITIONS
++
++ How to Apply These Terms to Your New Libraries
++
++ If you develop a new library, and you want it to be of the greatest
++possible use to the public, we recommend making it free software that
++everyone can redistribute and change. You can do so by permitting
++redistribution under these terms (or, alternatively, under the terms of the
++ordinary General Public License).
++
++ To apply these terms, attach the following notices to the library. It is
++safest to attach them to the start of each source file to most effectively
++convey the exclusion of warranty; and each file should have at least the
++"copyright" line and a pointer to where the full notice is found.
++
++ <one line to give the library's name and a brief idea of what it does.>
++ Copyright (C) <year> <name of author>
++
++ This library is free software; you can redistribute it and/or
++ modify it under the terms of the GNU Lesser General Public
++ License as published by the Free Software Foundation; either
++ version 2.1 of the License, or (at your option) any later version.
++
++ This library is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++ Lesser General Public License for more details.
++
++ You should have received a copy of the GNU Lesser General Public
++ License along with this library; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++
++Also add information on how to contact you by electronic and paper mail.
++
++You should also get your employer (if you work as a programmer) or your
++school, if any, to sign a "copyright disclaimer" for the library, if
++necessary. Here is a sample; alter the names:
++
++ Yoyodyne, Inc., hereby disclaims all copyright interest in the
++ library `Frob' (a library for tweaking knobs) written by James Random Hacker.
++
++ <signature of Ty Coon>, 1 April 1990
++ Ty Coon, President of Vice
++
++That's all there is to it!
++
++
+diff --git a/libclamav/libmspack-0.4alpha/ChangeLog b/libclamav/libmspack-0.4alpha/ChangeLog
+new file mode 100644
+index 000000000000..2d3cf198d499
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/ChangeLog
+@@ -0,0 +1,491 @@
++2013-05-27 Stuart Caie <kyzer at 4u.net>
++
++ * test/oabx.c: added new example command for unpacking OAB files.
++
++2013-05-17 Stuart Caie <kyzer at 4u.net>
++
++ * mspack.h: Support for decompressing a new file format, the Exchange
++ Offline Address Book (OAB). Thanks to David Woodhouse for writing
++ the implementation. I've bumped the version to 0.4alpha in celebration.
++
++2012-04-15 Stuart Caie <kyzer at 4u.net>
++
++ * chmd_read_headers(): More thorough validation of CHM header values.
++ Thanks to Sergei Trofimovich for finding sample files.
++
++ * read_reset_table(): Better test for overflow. Thanks again to
++ Sergei Trofimovich for generating a good example.
++
++ * test/chminfo.c: this test program reads the reset table by itself
++ and was also susceptible to the same overflow problems.
++
++2012-03-16 Stuart Caie <kyzer at 4u.net>
++
++ * Makefile.am, configure.ac: make the GCC warning flags conditional
++ on using the GCC compiler. Thanks to Dagobert Michelsen for letting
++ me know.
++
++2011-11-25 Stuart Caie <kyzer at 4u.net>
++
++ * lzxd_decompress(): Prevent matches that go beyond the start
++ of the LZX stream. Thanks to Sergei Trofimovich for testing
++ with valgrind and finding a corrupt sample file that exercises
++ this scenario.
++
++2011-11-23 Stuart Caie <kyzer at 4u.net>
++
++ * chmd_fast_find(): add a simple check against infinite PGML
++ loops. Thanks to Sergei Trofimovich for finding sample files.
++ Multi-step PGML or PGMI infinite loops remain possible.
++
++2011-06-17 Stuart Caie <kyzer at 4u.net>
++
++ * read_reset_table(): wasn't reading the right offset for getting
++ the LZX uncompressed length. Thanks to Sergei Trofimovich for
++ finding the bug.
++
++2011-05-31 Stuart Caie <kyzer at 4u.net>
++
++ * kwajd.c, mszipd.c: KWAJ type 4 files (MSZIP) are now supported.
++ Thanks to Clive Turvey for sending me the format details.
++
++ * doc/szdd_kwaj_format.html: Updated documentation to cover
++ KWAJ's MSZIP compression.
++
++2011-05-11 Stuart Caie <kyzer at 4u.net>
++
++ * cabd_find(): rethought how large vs small file support is
++ handled, as users were getting "library not compiled to support
++ large files" message on some small files. Now checks for actual
++ off_t overflow, rather than trying to preempt it.
++
++2011-05-10: Stuart Caie <kyzer at 4u.net>
++
++ * chmd.c: implemented fast_find()
++
++ * test/chmx.c: removed the multiple extraction orders, now it just
++ extracts in the fastest order
++
++ * test/chmd_order.c: new program added to test that different
++ extraction orders don't affect the results of extraction
++
++ * test/chmd_find.c: new program to test that fast_find() works.
++ Either supply your own filename to find, or it will try finding
++ every file in the CHM.
++
++ * configure.ac: because CHM fast find requires case-insensitive
++ comparisons, tolower() or towlower() are used where possible.
++ These functions and their headers are checked for.
++
++ * mspack.h: exposed struct mschmd_sec_mscompressed's spaninfo
++ and struct mschmd_header's first_pmgl, last_pmgl and chunk_cache
++ to the world. Check that the CHM decoder version is v2 or higher
++ before using them.
++
++ * system.c: set CHM decoder version to v2
++
++2011-04-27: Stuart Caie <kyzer at 4u.net>
++
++ * many files: Made C++ compilers much happier with libmspack.
++ Changed char * to const char * where possible.
++
++ * mspack.h: Changed user-supplied char * to const char *.
++ Unless you've written your own mspack_system implementation,
++ you will likely be unaffected.
++ If you have written your own mspack_system implementation:
++ 1: change open() so it takes a const char *filename
++ 2: change message() so it takes a const char *format
++ If you cast your function into the mspack_system struct,
++ you can change the cast instead of the function.
++
++2011-04-27: Stuart Caie <kyzer at 4u.net>
++
++ * Makefile.am: changed CFLAGS from "-Wsign-compare -Wconversion
++ -pedantic" to "-W -Wno-unused". This enables more warnings, and
++ disables these specific warnings which are now a hinderance.
++
++2011-04-27: Stuart Caie <kyzer at 4u.net>
++
++ * test/cabrip.c, test/chminfo.c: used macros from system.h for
++ printing offsets and reading 64-bit values, rather than
++ reinvent the wheel.
++
++ * cabd_can_merge_folders(): declare variables at the start of
++ a block so older C compilers won't choke.
++
++ * cabd_find(): avoid compiler complaints about non-initialised
++ variables. We know they'll get initialised before use, but the
++ compiler can't reverse a state machine to draw the same conclusion.
++
++2011-04-26: Stuart Caie <kyzer at 4u.net>
++
++ * configure.ac, mspack/system.h: Added a configure test to get
++ the size of off_t. If off_t is 8 bytes or more, we presume this
++ system has large file support. This fixes LFS detection for Fedora
++ x86_64 and Darwin/Mac OS X, neither of which declare FILESIZEBITS in
++ <limits.h>. It's not against the POSIX standard to do this: "A
++ definition of [FILESIZEBITS] shall be omitted from the <limits.h>
++ header on specific implementations where the corresponding value is
++ equal to or greater than the stated minimum, but where the value can
++ vary depending on the file to which it is applied."
++ (http://pubs.opengroup.org/onlinepubs/009695399/basedefs/limits.h.html)
++ Thanks to Edward Sheldrake for the patch.
++
++2011-04-26: Stuart Caie <kyzer at 4u.net>
++
++ * chmd.c: all 64-bit integer reads are now consolidated into
++ the read_off64() function
++
++ * chmd_read_headers(): this function has been made resilient
++ against accessing memory past the end of a chunk. Thanks to
++ Sergei Trofimovich for sending me examples and analysis.
++
++ * chmd_init_decomp(): this function now reads the SpanInfo file
++ if the ResetTable file isn't available, it also checks that each
++ system file it needs is large enough before accessing it, and
++ some of its code has been split into several new functions:
++ find_sys_file(), read_reset_table() and read_spaninfo()
++
++2011-04-26: Stuart Caie <kyzer at 4u.net>
++
++ * mspack.h, chmd.c: now reads the SpanInfo system file if the
++ ResetTable file isn't available. This adds a new spaninfo pointer
++ into struct mschmd_sec_mscompressed
++
++2011-04-26: Stuart Caie <kyzer at 4u.net>
++
++ * test/chminfo.c: more sanity checks for corrupted CHM files where
++ entries go past the end of a PGML/PGMI chunk, thanks to
++ Sergei Trofimovich for sending me examples and analysis.
++
++2011-04-25: Stuart Caie <kyzer at 4u.net>
++
++ * cabd_merge(): Drew D'Addesio showed me spanning cabinets which
++ don't have all the CFFILE entries they should, but otherwise have
++ all necessary data for extraction. Changed the merging folders
++ test to be less strict; if folders don't exactly match, warn which
++ files are missing, but allow merging if at least one necessary
++ file is present.
++
++2010-09-24: Stuart Caie <kyzer at 4u.net>
++
++ * readhuff.h: Don't let build_decode_table() allow empty trees.
++ It's meant to be special case just for the LZX length tree, so
++ move that logic out to the LZX code. Thanks to Danny Kroshin for
++ discovering the bug.
++
++ * lzxd.c: Allow empty length trees, but not other trees. If
++ the length tree is empty, fail if asked to decode a length symbol.
++ Again, thanks to Danny Kroshin for discovering the bug.
++
++2010-09-20: Stuart Caie <kyzer at 4u.net>
++
++ * Makefile.am: Set EXTRA_DIST so it doesn't include .svn
++ directories in the distribution, but does include docs.
++
++2010-09-20: Stuart Caie <kyzer at 4u.net>
++
++ * Makefile.am, configure.ac: Use modern auto* practises; turn on
++ automake silent rules where possible, use "m4" directory for libtool
++ macros, use LT_INIT instead of AC_PROG_LIBTOOL and use AM_CPPFLAGS
++ instead of INCLUDES. Thanks to Sergei Trofimovich for the patch.
++
++2010-09-15: Stuart Caie <kyzer at 4u.net>
++
++ * many files: Made the code compile with C++
++ - Renamed all 'this' variables/parameters to 'self'
++ - Added casts to all memory allocations.
++ - Added extern "C" to header files with extern declarations.
++ - Made system.c include system.h.
++ - Changed the K&R-style headers to ANSI-style headers in md5.c
++
++2010-08-04: Stuart Caie <kyzer at 4u.net>
++
++ * many files: removed unnecessary <unistd.h> include
++
++2010-07-19: Stuart Caie <kyzer at 4u.net>
++
++ * cabd_md5.c, chmd_md5.c: Replace writing files to disk then
++ MD5summing them, with an MD5summer built into mspack_system.
++ Much, much faster results.
++
++ * qtmd_decompress(): Robert Riebisch pointed out a Quantum
++ data integrity check that could never be tripped, because
++ frame_todo is unsigned, so it will never be decremented
++ below zero. Replaced the check with one that assumes that
++ decrementing past zero wraps frame_todo round to a number
++ more than its maximum value (QTM_FRAME_SIZE).
++
++2010-07-18: Stuart Caie <kyzer at 4u.net>
++
++ * cabd.c: Special logic to pass cabd_sys_read() errors back
++ to cabd_extract() wasn't compatible with the decompressor
++ logic of returning the same error repeatedly once unpacking
++ fails. This meant that if decompressing failed because of
++ a read error, then the next file in the same folder would
++ come back as "no error", but the decompressed wouldn't have
++ even attempted to decompress the file. Added a new state
++ variable, read_error, with the same lifespan as a decompressor,
++ to pass the underlying reason for MSPACK_ERR_READ errors back.
++
++ * mszipd.c: improve MS-ZIP recovery by saving all the bytes
++ decoded prior to a block failing. This requires remembering
++ how far we got through the block, so the code has been made
++ slightly slower (about 0.003 seconds slower per gigabyte
++ unpacked) by removing the local variable window_posn
++ and keeping it in the state structure instead.
++
++2010-07-16: Stuart Caie <kyzer at 4u.net>
++
++ * Makefile.am: strange interactions. When -std=c99 is used,
++ my Ubuntu's <stdio.h> (libc6-dev 2.11.1-0ubuntu7.2) does NOT
++ define fseeko() unless _LARGEFILE_SOURCE is also defined. But
++ configure always uses -std=gnu99, not -std=c99, so its test
++ determines _LARGEFILE_SOURCE isn't needed but HAVE_FSEEKO is
++ true. The implicit fseeko definition has a 32-bit rather than
++ 64-bit offset, which means the mode parameter is interpreted
++ as part of the offset, and the mode is taken from the stack,
++ which is generally 0 (SEEK_SET). This breaks all SEEK_CURs.
++ The code works fine when -std=c99 is not set, so just remove
++ it for the time being.
++
++2010-07-12: Stuart Caie <kyzer at 4u.net>
++
++ * system.c: Reject reading/writing a negative number of bytes.
++
++ * chmd.c: allow zero-length files to be seen. Previously they were
++ skipped because they were mistaken for directory entries.
++
++2010-07-08: Stuart Caie <kyzer at 4u.net>
++
++ * qtmd.c: Larry Frieson found an important bug in the Quantum
++ decoder. Window wraps flush all unwritten data to disk.
++ However, sometimes less data is needed, which makes
++ out_bytes negative, which is then passed to write(). Some
++ write() implementations treat negative sizes it as a large
++ positive integer and segfault trying to write the buffer.
++
++ * Makefile.am, test/*.c: fixed automake file so that the
++ package passes a "make distcheck".
++
++2010-07-07: Stuart Caie <kyzer at 4u.net>
++
++ * doc/szdd_kwaj_format.html: explain SZDD/KWAJ file format.
++
++ * lzssd.c: fixed SZDD decompression bugs.
++
++ * test/chmd_compare: Add scripts for comparing chmd_md5 against
++ Microsoft's own code.
++
++ * test/chmd_md5.c: remove the need to decompress everything
++ twice, as this is already in chmx.c if needed.
++
++2010-07-06: Stuart Caie <kyzer at 4u.net>
++
++ * many files: added SZDD and KWAJ decompression support.
++
++2010-06-18: Stuart Caie <kyzer at 4u.net>
++
++ * system.h: expanded the test for 64-bit largefile support so
++ it also works on 64-bit native operating systems where you
++ don't have to define _FILE_OFFSET_BITS.
++
++2010-06-17: Stuart Caie <kyzer at 4u.net>
++
++ * libmspack.pc.in: Added pkg-config support. Thanks to
++ Patrice Dumas for the patch.
++
++2010-06-14: Stuart Caie <kyzer at 4u.net>
++
++ * qtmd.c, lzxd.c, mszipd.c: created new headers, readbits.h and
++ readhuff.h, which bundle up the bit-reading and huffman-reading
++ code found in the MSZIP, LZX and Quantum decoders.
++
++2010-06-11: Stuart Caie <kyzer at 4u.net>
++
++ * qtmd_static_init(): Removed function in favour of static const
++ tables, same rationale as for lzxd_static_init().
++
++ * qtmd_read_input(), zipd_read_input(): After testing against my
++ set of CABs from the wild, I've found both these functions _need_
++ an extra EOF flag, like lzxd_read_input() has. So I've added
++ it. This means CABs get decoded properly AND there's no reading
++ fictional bytes.
++
++2010-06-03: Stuart Caie <kyzer at 4u.net>
++
++ * test/cabd_md5.c: updated this so it has better output and
++ doesn't need to be in the same directory as the files for multi-
++ part sets.
++
++2010-05-20: Stuart Caie <kyzer at 4u.net>
++
++ * qtmd_read_input(), zipd_read_input(): Both these functions are
++ essentially copies of lzxd_read_input(), but that has a feature
++ they don't have - an extra EOF flag. So if EOF is
++ encountered (sys->read() returns 0 bytes), these don't pass on the
++ error. Their respective bit-reading functions that called them
++ then go on to access at least one byte of the input buffer, which
++ doesn't exist as sys->read() returned 0. Thanks to Michael
++ Vidrevich for spotting this and providing a test case.
++
++2010-05-20: Stuart Caie <kyzer at 4u.net>
++
++ * system.h: It turns out no configure.ac tests are needed to
++ decide between __func__ and __FUNCTION__, so I put the standard
++ one (__func__) back into the D() macro, along with some
++ special-case ifdefs for old versions of GCC.
++
++ * lzxd_static_init(): Removed function in favour of static const
++ tables. Jorge Lodos thinks it causes multithreading problems, I
++ disagree. However, there are speed benefits to declaring the
++ tables as static const.
++
++ * cabd_init_decomp(): Fixed code which never runs but would write
++ to a null pointer if it could. Changed it to an assert() as it
++ will only trip if someone rewrites the internals of cabd.c. Thanks
++ to Jorge Lodos for finding it.
++
++ * inflate(): Fixed an off-by-one error: if the LITERAL table
++ emitted code 286, this would read one byte past the end of
++ lit_extrabits[]. Thanks to Jorge Lodos for finding it.
++
++2010-05-06: Stuart Caie <kyzer at 4u.net>
++
++ * test/cabrip.c, test/chminfo.c: add fseeko() support
++
++2009-06-01: Stuart Caie <kyzer at 4u.net>
++
++ * README: clarify the extended license terms
++
++ * doc, Makefile.am: make the doxygen makefile work when using
++ an alternate build directory
++
++2006-09-20: Stuart Caie <kyzer at 4u.net>
++
++ * system.h: I had a choice of adding more to configure.ac to
++ test for __func__ and __FUNCTION__, or just removing __FUNCTION__
++ from the D() macro. I chose the latter.
++
++ * Makefile.am: Now the --enable-debug in configure will actually
++ apply -DDEBUG to the sources.
++
++2006-09-20: Stuart Caie <kyzer at 4u.net>
++
++ * qtmd_decompress(): Fixed a major bug in the QTM decoder, as
++ reported by Tomasz Kojm last year. Removed the restriction on
++ window sizes as a result. Correctly decodes the XLVIEW cabinets.
++
++2006-08-31: Stuart Caie <kyzer at 4u.net>
++
++ * lzxd_decompress(): Two major bugs fixed. Firstly, the R0/R1/R2
++ local variables weren't set to 1 after lzxd_reset_state().
++ Secondly, the LZX decompression stream can sometimes become
++ odd-aligned (after an uncompressed block) and the next 16 bit
++ fetch needs to be split across two input buffers, ENSURE_BITS()
++ didn't cover this case. Many thanks to Igor Glucksmann for
++ discovering both these bugs.
++
++2005-06-30: Stuart Caie <kyzer at 4u.net>
++
++ * cabd_search(): fixed problems with searching files > 4GB for
++ cabinets.
++
++2005-06-23: Stuart Caie <kyzer at 4u.net>
++
++ * qtmd_init(): The QTM decoder is broken for QTM streams with a
++ window size less than the frame size. Until this is fixed, fail
++ to initialise QTM window sizes less than 15. Thanks to Tomasz Kojm
++ for finding the bug.
++
++2005-03-22: Stuart Caie <kyzer at 4u.net>
++
++ * system.h: now undefs "read", as the latest glibc defines read()
++ as a macro which messes everything up. Thanks to Ville Skyttä for
++ the update.
++
++2005-03-14: Stuart Caie <kyzer at 4u.net>
++
++ * test/multifh.c: write an mspack_system implementation that can
++ handle normal disk files, open file handles, open file descriptors
++ and raw memory all at the same time.
++
++2005-02-24: Stuart Caie <kyzer at 4u.net>
++
++ * chmd_read_headers(): avoid infinite loop when chmhs1_ChunkSize is
++ zero. Thanks to Serge Semashko for the research and discovery.
++
++2005-02-18: Stuart Caie <kyzer at 4u.net>
++
++ * mspack.h: renamed the "interface" parameter of mspack_version() to
++ "entity", as interface is a reserved word in C++. Thanks to Yuriy Z
++ for the discovery.
++
++2004-12-09: Stuart Caie <kyzer at 4u.net>
++
++ * lzss.h, szdd.h, szddd.h: more work on the SZDD/LZSS design.
++
++2004-06-12: Stuart Caie <kyzer at 4u.net>
++
++ * lzxd_static_init(): removed write to lzxd_extra_bits[52], thanks
++ to Nigel Horne from the ClamAV project.
++
++2004-04-23: Stuart Caie <kyzer at 4u.net>
++
++ * mspack.h: changed 'this' parameters to 'self' to allow compiling in
++ C++ compilers, thanks to Michal Cihar for the suggestion.
++
++ * mspack.h, system.h, mspack.def, winbuild.sh: integrated some changes
++ from Petr Blahos to let libmspack build as a Win32 DLL.
++
++ * chmd_fast_find(): added the first part of this code, and comments
++ sufficient to finish it :)
++
++2004-04-08 Stuart Caie <kyzer at 4u.net>
++
++ * test/chminfo.c: added a program for dumping useful data from CHM
++ files, e.g. index entries and reset tables. I wrote this a while ago
++ for investigating a corrupt cabinet, but I never committed it.
++
++2004-03-26 Stuart Caie <kyzer at 4u.net>
++
++ * test/cabd_memory.c: added a new test example which shows an
++ mspack_system implementation that reads and writes from memory only,
++ no file I/O. Even the source code has a little cab file embedded in it.
++
++2004-03-10 Stuart Caie <kyzer at 4u.net>
++
++ * cabd.c: updated the location of the CAB SDK.
++
++ * cabd.c: changed a couple of MSPACK_ERR_READ errors not based on
++ read() failures into MSPACK_ERR_DATAFORMAT errors.
++
++ * mszipd_decompress(): repair mode now aborts after writing a
++ repaired block if the error was a hard error (e.g. read error, out
++ of blocks, etc)
++
++2004-03-08 Stuart Caie <kyzer at 4u.net>
++
++ * Makefile.am: now builds and installs a versioned library.
++
++ * mszipd.c: completed a new MS-ZIP and inflate implementation.
++
++ * system.c: added mspack_version() and committed to a versioned
++ ABI for the library.
++
++ * cabd.c: made mszip repair functionality work correctly.
++
++ * cabd.c: now identifies invalid block headers
++
++ * doc/: API documentation is now included with the library, not
++ just on the web.
++
++ * chmd.c: fixed error messages and 64-bit debug output.
++
++ * chmd.c: now also catches NULL files in section 1.
++
++ * test/chmx.c: now acts more like cabextract.
++
++2003-08-29 Stuart Caie <kyzer at 4u.net>
++
++ * ChangeLog: started keeping a ChangeLog :)
+diff --git a/libclamav/libmspack-0.4alpha/INSTALL b/libclamav/libmspack-0.4alpha/INSTALL
+new file mode 100644
+index 000000000000..a1e89e18ad20
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/INSTALL
+@@ -0,0 +1,370 @@
++Installation Instructions
++*************************
++
++Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
++Inc.
++
++ Copying and distribution of this file, with or without modification,
++are permitted in any medium without royalty provided the copyright
++notice and this notice are preserved. This file is offered as-is,
++without warranty of any kind.
++
++Basic Installation
++==================
++
++ Briefly, the shell commands `./configure; make; make install' should
++configure, build, and install this package. The following
++more-detailed instructions are generic; see the `README' file for
++instructions specific to this package. Some packages provide this
++`INSTALL' file but do not implement all of the features documented
++below. The lack of an optional feature in a given package is not
++necessarily a bug. More recommendations for GNU packages can be found
++in *note Makefile Conventions: (standards)Makefile Conventions.
++
++ The `configure' shell script attempts to guess correct values for
++various system-dependent variables used during compilation. It uses
++those values to create a `Makefile' in each directory of the package.
++It may also create one or more `.h' files containing system-dependent
++definitions. Finally, it creates a shell script `config.status' that
++you can run in the future to recreate the current configuration, and a
++file `config.log' containing compiler output (useful mainly for
++debugging `configure').
++
++ It can also use an optional file (typically called `config.cache'
++and enabled with `--cache-file=config.cache' or simply `-C') that saves
++the results of its tests to speed up reconfiguring. Caching is
++disabled by default to prevent problems with accidental use of stale
++cache files.
++
++ If you need to do unusual things to compile the package, please try
++to figure out how `configure' could check whether to do them, and mail
++diffs or instructions to the address given in the `README' so they can
++be considered for the next release. If you are using the cache, and at
++some point `config.cache' contains results you don't want to keep, you
++may remove or edit it.
++
++ The file `configure.ac' (or `configure.in') is used to create
++`configure' by a program called `autoconf'. You need `configure.ac' if
++you want to change it or regenerate `configure' using a newer version
++of `autoconf'.
++
++ The simplest way to compile this package is:
++
++ 1. `cd' to the directory containing the package's source code and type
++ `./configure' to configure the package for your system.
++
++ Running `configure' might take a while. While running, it prints
++ some messages telling which features it is checking for.
++
++ 2. Type `make' to compile the package.
++
++ 3. Optionally, type `make check' to run any self-tests that come with
++ the package, generally using the just-built uninstalled binaries.
++
++ 4. Type `make install' to install the programs and any data files and
++ documentation. When installing into a prefix owned by root, it is
++ recommended that the package be configured and built as a regular
++ user, and only the `make install' phase executed with root
++ privileges.
++
++ 5. Optionally, type `make installcheck' to repeat any self-tests, but
++ this time using the binaries in their final installed location.
++ This target does not install anything. Running this target as a
++ regular user, particularly if the prior `make install' required
++ root privileges, verifies that the installation completed
++ correctly.
++
++ 6. You can remove the program binaries and object files from the
++ source code directory by typing `make clean'. To also remove the
++ files that `configure' created (so you can compile the package for
++ a different kind of computer), type `make distclean'. There is
++ also a `make maintainer-clean' target, but that is intended mainly
++ for the package's developers. If you use it, you may have to get
++ all sorts of other programs in order to regenerate files that came
++ with the distribution.
++
++ 7. Often, you can also type `make uninstall' to remove the installed
++ files again. In practice, not all packages have tested that
++ uninstallation works correctly, even though it is required by the
++ GNU Coding Standards.
++
++ 8. Some packages, particularly those that use Automake, provide `make
++ distcheck', which can by used by developers to test that all other
++ targets like `make install' and `make uninstall' work correctly.
++ This target is generally not run by end users.
++
++Compilers and Options
++=====================
++
++ Some systems require unusual options for compilation or linking that
++the `configure' script does not know about. Run `./configure --help'
++for details on some of the pertinent environment variables.
++
++ You can give `configure' initial values for configuration parameters
++by setting variables in the command line or in the environment. Here
++is an example:
++
++ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
++
++ *Note Defining Variables::, for more details.
++
++Compiling For Multiple Architectures
++====================================
++
++ You can compile the package for more than one kind of computer at the
++same time, by placing the object files for each architecture in their
++own directory. To do this, you can use GNU `make'. `cd' to the
++directory where you want the object files and executables to go and run
++the `configure' script. `configure' automatically checks for the
++source code in the directory that `configure' is in and in `..'. This
++is known as a "VPATH" build.
++
++ With a non-GNU `make', it is safer to compile the package for one
++architecture at a time in the source code directory. After you have
++installed the package for one architecture, use `make distclean' before
++reconfiguring for another architecture.
++
++ On MacOS X 10.5 and later systems, you can create libraries and
++executables that work on multiple system types--known as "fat" or
++"universal" binaries--by specifying multiple `-arch' options to the
++compiler but only a single `-arch' option to the preprocessor. Like
++this:
++
++ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
++ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
++ CPP="gcc -E" CXXCPP="g++ -E"
++
++ This is not guaranteed to produce working output in all cases, you
++may have to build one architecture at a time and combine the results
++using the `lipo' tool if you have problems.
++
++Installation Names
++==================
++
++ By default, `make install' installs the package's commands under
++`/usr/local/bin', include files under `/usr/local/include', etc. You
++can specify an installation prefix other than `/usr/local' by giving
++`configure' the option `--prefix=PREFIX', where PREFIX must be an
++absolute file name.
++
++ You can specify separate installation prefixes for
++architecture-specific files and architecture-independent files. If you
++pass the option `--exec-prefix=PREFIX' to `configure', the package uses
++PREFIX as the prefix for installing programs and libraries.
++Documentation and other data files still use the regular prefix.
++
++ In addition, if you use an unusual directory layout you can give
++options like `--bindir=DIR' to specify different values for particular
++kinds of files. Run `configure --help' for a list of the directories
++you can set and what kinds of files go in them. In general, the
++default for these options is expressed in terms of `${prefix}', so that
++specifying just `--prefix' will affect all of the other directory
++specifications that were not explicitly provided.
++
++ The most portable way to affect installation locations is to pass the
++correct locations to `configure'; however, many packages provide one or
++both of the following shortcuts of passing variable assignments to the
++`make install' command line to change installation locations without
++having to reconfigure or recompile.
++
++ The first method involves providing an override variable for each
++affected directory. For example, `make install
++prefix=/alternate/directory' will choose an alternate location for all
++directory configuration variables that were expressed in terms of
++`${prefix}'. Any directories that were specified during `configure',
++but not in terms of `${prefix}', must each be overridden at install
++time for the entire installation to be relocated. The approach of
++makefile variable overrides for each directory variable is required by
++the GNU Coding Standards, and ideally causes no recompilation.
++However, some platforms have known limitations with the semantics of
++shared libraries that end up requiring recompilation when using this
++method, particularly noticeable in packages that use GNU Libtool.
++
++ The second method involves providing the `DESTDIR' variable. For
++example, `make install DESTDIR=/alternate/directory' will prepend
++`/alternate/directory' before all installation names. The approach of
++`DESTDIR' overrides is not required by the GNU Coding Standards, and
++does not work on platforms that have drive letters. On the other hand,
++it does better at avoiding recompilation issues, and works well even
++when some directory options were not specified in terms of `${prefix}'
++at `configure' time.
++
++Optional Features
++=================
++
++ If the package supports it, you can cause programs to be installed
++with an extra prefix or suffix on their names by giving `configure' the
++option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
++
++ Some packages pay attention to `--enable-FEATURE' options to
++`configure', where FEATURE indicates an optional part of the package.
++They may also pay attention to `--with-PACKAGE' options, where PACKAGE
++is something like `gnu-as' or `x' (for the X Window System). The
++`README' should mention any `--enable-' and `--with-' options that the
++package recognizes.
++
++ For packages that use the X Window System, `configure' can usually
++find the X include and library files automatically, but if it doesn't,
++you can use the `configure' options `--x-includes=DIR' and
++`--x-libraries=DIR' to specify their locations.
++
++ Some packages offer the ability to configure how verbose the
++execution of `make' will be. For these packages, running `./configure
++--enable-silent-rules' sets the default to minimal output, which can be
++overridden with `make V=1'; while running `./configure
++--disable-silent-rules' sets the default to verbose, which can be
++overridden with `make V=0'.
++
++Particular systems
++==================
++
++ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
++CC is not installed, it is recommended to use the following options in
++order to use an ANSI C compiler:
++
++ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
++
++and if that doesn't work, install pre-built binaries of GCC for HP-UX.
++
++ HP-UX `make' updates targets which have the same time stamps as
++their prerequisites, which makes it generally unusable when shipped
++generated files such as `configure' are involved. Use GNU `make'
++instead.
++
++ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
++parse its `<wchar.h>' header file. The option `-nodtk' can be used as
++a workaround. If GNU CC is not installed, it is therefore recommended
++to try
++
++ ./configure CC="cc"
++
++and if that doesn't work, try
++
++ ./configure CC="cc -nodtk"
++
++ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
++directory contains several dysfunctional programs; working variants of
++these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
++in your `PATH', put it _after_ `/usr/bin'.
++
++ On Haiku, software installed for all users goes in `/boot/common',
++not `/usr/local'. It is recommended to use the following options:
++
++ ./configure --prefix=/boot/common
++
++Specifying the System Type
++==========================
++
++ There may be some features `configure' cannot figure out
++automatically, but needs to determine by the type of machine the package
++will run on. Usually, assuming the package is built to be run on the
++_same_ architectures, `configure' can figure that out, but if it prints
++a message saying it cannot guess the machine type, give it the
++`--build=TYPE' option. TYPE can either be a short name for the system
++type, such as `sun4', or a canonical name which has the form:
++
++ CPU-COMPANY-SYSTEM
++
++where SYSTEM can have one of these forms:
++
++ OS
++ KERNEL-OS
++
++ See the file `config.sub' for the possible values of each field. If
++`config.sub' isn't included in this package, then this package doesn't
++need to know the machine type.
++
++ If you are _building_ compiler tools for cross-compiling, you should
++use the option `--target=TYPE' to select the type of system they will
++produce code for.
++
++ If you want to _use_ a cross compiler, that generates code for a
++platform different from the build platform, you should specify the
++"host" platform (i.e., that on which the generated programs will
++eventually be run) with `--host=TYPE'.
++
++Sharing Defaults
++================
++
++ If you want to set default values for `configure' scripts to share,
++you can create a site shell script called `config.site' that gives
++default values for variables like `CC', `cache_file', and `prefix'.
++`configure' looks for `PREFIX/share/config.site' if it exists, then
++`PREFIX/etc/config.site' if it exists. Or, you can set the
++`CONFIG_SITE' environment variable to the location of the site script.
++A warning: not all `configure' scripts look for a site script.
++
++Defining Variables
++==================
++
++ Variables not defined in a site shell script can be set in the
++environment passed to `configure'. However, some packages may run
++configure again during the build, and the customized values of these
++variables may be lost. In order to avoid this problem, you should set
++them in the `configure' command line, using `VAR=value'. For example:
++
++ ./configure CC=/usr/local2/bin/gcc
++
++causes the specified `gcc' to be used as the C compiler (unless it is
++overridden in the site shell script).
++
++Unfortunately, this technique does not work for `CONFIG_SHELL' due to
++an Autoconf bug. Until the bug is fixed you can use this workaround:
++
++ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
++
++`configure' Invocation
++======================
++
++ `configure' recognizes the following options to control how it
++operates.
++
++`--help'
++`-h'
++ Print a summary of all of the options to `configure', and exit.
++
++`--help=short'
++`--help=recursive'
++ Print a summary of the options unique to this package's
++ `configure', and exit. The `short' variant lists options used
++ only in the top level, while the `recursive' variant lists options
++ also present in any nested packages.
++
++`--version'
++`-V'
++ Print the version of Autoconf used to generate the `configure'
++ script, and exit.
++
++`--cache-file=FILE'
++ Enable the cache: use and save the results of the tests in FILE,
++ traditionally `config.cache'. FILE defaults to `/dev/null' to
++ disable caching.
++
++`--config-cache'
++`-C'
++ Alias for `--cache-file=config.cache'.
++
++`--quiet'
++`--silent'
++`-q'
++ Do not print messages saying which checks are being made. To
++ suppress all normal output, redirect it to `/dev/null' (any error
++ messages will still be shown).
++
++`--srcdir=DIR'
++ Look for the package's source code in directory DIR. Usually
++ `configure' can determine that directory automatically.
++
++`--prefix=DIR'
++ Use DIR as the installation prefix. *note Installation Names::
++ for more details, including other options available for fine-tuning
++ the installation locations.
++
++`--no-create'
++`-n'
++ Run the configure checks, but stop before creating any output
++ files.
++
++`configure' also accepts some other, not widely useful, options. Run
++`configure --help' for more details.
++
+diff --git a/libclamav/libmspack-0.4alpha/Makefile.am b/libclamav/libmspack-0.4alpha/Makefile.am
+new file mode 100644
+index 000000000000..4f249275001a
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/Makefile.am
+@@ -0,0 +1,100 @@
++EXTRA_DIST = $(srcdir)/debian/* $(srcdir)/doc/* $(srcdir)/test/test_files/*/*
++pkgconfigdir = $(libdir)/pkgconfig
++pkgconfig_DATA = libmspack.pc
++
++dist-hook:
++ -rm -f $(distdir)/*.la
++
++ACLOCAL_AMFLAGS = -I m4
++AM_CFLAGS =
++# add "-DMSPACK_NO_DEFAULT_SYSTEM" to remove default mspack_system
++if DEBUG
++AM_CFLAGS += -DDEBUG
++endif
++if GCC
++AM_CFLAGS += -Wall -W -Wno-unused
++endif
++AM_CPPFLAGS = -I$(top_srcdir)/mspack -I$(top_srcdir)/test
++
++lib_LTLIBRARIES = libmspack.la
++include_HEADERS = mspack/mspack.h
++
++noinst_LTLIBRARIES = libmscabd.la libmschmd.la
++noinst_PROGRAMS = test/cabd_md5 test/cabd_memory test/cabd_test \
++ test/cabrip test/chmd_md5 test/chmx test/chminfo \
++ test/multifh test/expand test/chmd_find \
++ test/chmd_order test/oabx
++
++libmspack_la_SOURCES = mspack/mspack.h \
++ mspack/system.h mspack/system.c \
++ mspack/cab.h mspack/cabc.c mspack/cabd.c \
++ mspack/chm.h mspack/chmc.c mspack/chmd.c \
++ mspack/hlp.h mspack/hlpc.c mspack/hlpd.c \
++ mspack/lit.h mspack/litc.c mspack/litd.c \
++ mspack/kwaj.h mspack/kwajc.c mspack/kwajd.c \
++ mspack/szdd.h mspack/szddc.c mspack/szddd.c \
++ mspack/oab.h mspack/oabc.c mspack/oabd.c \
++ mspack/lzx.h mspack/lzxc.c mspack/lzxd.c \
++ mspack/mszip.h mspack/mszipc.c mspack/mszipd.c \
++ mspack/qtm.h mspack/qtmd.c \
++ mspack/readbits.h mspack/readhuff.h \
++ mspack/lzss.h mspack/lzssd.c \
++ mspack/des.h mspack/sha.h \
++ mspack/crc32.c mspack/crc32.h
++libmspack_la_LDFLAGS = -export-symbols-regex '^mspack_' -version-info 1:0:1
++
++libmscabd_la_SOURCES = mspack/mspack.h \
++ mspack/system.h mspack/system.c \
++ mspack/cab.h mspack/cabd.c \
++ mspack/lzx.h mspack/lzxd.c \
++ mspack/mszip.h mspack/mszipd.c \
++ mspack/qtm.h mspack/qtmd.c \
++ mspack/readbits.h mspack/readhuff.h
++libmscabd_la_LDFLAGS = -export-symbols-regex '^mspack_'
++
++libmschmd_la_SOURCES = mspack/mspack.h \
++ mspack/system.h mspack/system.c \
++ mspack/chm.h mspack/chmd.c \
++ mspack/lzx.h mspack/lzxd.c \
++ mspack/readbits.h mspack/readhuff.h
++libmschmd_la_LDFLAGS = -export-symbols-regex '^mspack_'
++
++test_chmx_SOURCES = test/chmx.c test/error.h libmschmd.la
++test_chmx_LDADD = libmschmd.la
++
++test_chmd_md5_SOURCES = test/chmd_md5.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmschmd.la
++test_chmd_md5_LDADD = libmschmd.la
++
++test_cabd_md5_SOURCES = test/cabd_md5.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmscabd.la
++test_cabd_md5_LDADD = libmscabd.la
++
++test_cabd_test_SOURCES= test/cabd_test.c libmscabd.la
++test_cabd_test_LDADD = libmscabd.la
++
++test_cabrip_SOURCES = test/cabrip.c libmscabd.la
++test_cabrip_LDADD = libmscabd.la
++
++test_cabd_memory_SOURCES = test/cabd_memory.c libmscabd.la
++test_cabd_memory_LDADD = libmscabd.la
++
++test_chminfo_SOURCES = test/chminfo.c libmschmd.la
++test_chminfo_LDADD = libmschmd.la
++
++test_multifh_SOURCES = test/multifh.c libmscabd.la
++test_multifh_LDADD = libmscabd.la
++
++test_expand_SOURCES = test/expand.c test/error.h libmspack.la
++test_expand_LDADD = libmspack.la
++
++test_chmd_find_SOURCES = test/chmd_find.c test/error.h libmschmd.la
++test_chmd_find_LDADD = libmschmd.la
++
++test_chmd_order_SOURCES = test/chmd_order.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmschmd.la
++test_chmd_order_LDADD = libmschmd.la
++
++test_oabx_SOURCES = test/oabx.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmspack.la
++test_oabx_LDADD = libmspack.la
+diff --git a/libclamav/libmspack-0.4alpha/Makefile.in b/libclamav/libmspack-0.4alpha/Makefile.in
+new file mode 100644
+index 000000000000..2c1e02e9aa9c
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/Makefile.in
+@@ -0,0 +1,1371 @@
++# Makefile.in generated by automake 1.11.3 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
++# Foundation, Inc.
++# This Makefile.in is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++ at SET_MAKE@
++
++
++
++
++VPATH = @srcdir@
++pkgdatadir = $(datadir)/@PACKAGE@
++pkgincludedir = $(includedir)/@PACKAGE@
++pkglibdir = $(libdir)/@PACKAGE@
++pkglibexecdir = $(libexecdir)/@PACKAGE@
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
++NORMAL_INSTALL = :
++PRE_INSTALL = :
++POST_INSTALL = :
++NORMAL_UNINSTALL = :
++PRE_UNINSTALL = :
++POST_UNINSTALL = :
++build_triplet = @build@
++host_triplet = @host@
++# add "-DMSPACK_NO_DEFAULT_SYSTEM" to remove default mspack_system
++ at DEBUG_TRUE@am__append_1 = -DDEBUG
++ at GCC_TRUE@am__append_2 = -Wall -W -Wno-unused
++noinst_PROGRAMS = test/cabd_md5$(EXEEXT) test/cabd_memory$(EXEEXT) \
++ test/cabd_test$(EXEEXT) test/cabrip$(EXEEXT) \
++ test/chmd_md5$(EXEEXT) test/chmx$(EXEEXT) \
++ test/chminfo$(EXEEXT) test/multifh$(EXEEXT) \
++ test/expand$(EXEEXT) test/chmd_find$(EXEEXT) \
++ test/chmd_order$(EXEEXT) test/oabx$(EXEEXT)
++subdir = .
++DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
++ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
++ $(srcdir)/config.h.in $(srcdir)/libmspack.pc.in \
++ $(top_srcdir)/configure $(top_srcdir)/doc/Doxyfile.in \
++ $(top_srcdir)/doc/Makefile.in AUTHORS COPYING.LIB ChangeLog \
++ INSTALL NEWS TODO config.guess config.sub depcomp install-sh \
++ ltmain.sh missing
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
++ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
++ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
++ $(top_srcdir)/configure.ac
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno config.status.lineno
++mkinstalldirs = $(install_sh) -d
++CONFIG_HEADER = config.h
++CONFIG_CLEAN_FILES = doc/Makefile doc/Doxyfile libmspack.pc
++CONFIG_CLEAN_VPATH_FILES =
++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
++am__vpath_adj = case $$p in \
++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
++ *) f=$$p;; \
++ esac;
++am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
++am__install_max = 40
++am__nobase_strip_setup = \
++ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
++am__nobase_strip = \
++ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
++am__nobase_list = $(am__nobase_strip_setup); \
++ for p in $$list; do echo "$$p $$p"; done | \
++ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
++ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
++ if (++n[$$2] == $(am__install_max)) \
++ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
++ END { for (dir in files) print dir, files[dir] }'
++am__base_list = \
++ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
++ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
++am__uninstall_files_from_dir = { \
++ test -z "$$files" \
++ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
++ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
++ $(am__cd) "$$dir" && rm -f $$files; }; \
++ }
++am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \
++ "$(DESTDIR)$(includedir)"
++LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
++libmscabd_la_LIBADD =
++am_libmscabd_la_OBJECTS = system.lo cabd.lo lzxd.lo mszipd.lo qtmd.lo
++libmscabd_la_OBJECTS = $(am_libmscabd_la_OBJECTS)
++AM_V_lt = $(am__v_lt_ at AM_V@)
++am__v_lt_ = $(am__v_lt_ at AM_DEFAULT_V@)
++am__v_lt_0 = --silent
++libmscabd_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
++ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++ $(libmscabd_la_LDFLAGS) $(LDFLAGS) -o $@
++libmschmd_la_LIBADD =
++am_libmschmd_la_OBJECTS = system.lo chmd.lo lzxd.lo
++libmschmd_la_OBJECTS = $(am_libmschmd_la_OBJECTS)
++libmschmd_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
++ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++ $(libmschmd_la_LDFLAGS) $(LDFLAGS) -o $@
++libmspack_la_LIBADD =
++am_libmspack_la_OBJECTS = system.lo cabc.lo cabd.lo chmc.lo chmd.lo \
++ hlpc.lo hlpd.lo litc.lo litd.lo kwajc.lo kwajd.lo szddc.lo \
++ szddd.lo oabc.lo oabd.lo lzxc.lo lzxd.lo mszipc.lo mszipd.lo \
++ qtmd.lo lzssd.lo crc32.lo
++libmspack_la_OBJECTS = $(am_libmspack_la_OBJECTS)
++libmspack_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
++ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++ $(libmspack_la_LDFLAGS) $(LDFLAGS) -o $@
++PROGRAMS = $(noinst_PROGRAMS)
++am_test_cabd_md5_OBJECTS = cabd_md5.$(OBJEXT) md5.$(OBJEXT)
++test_cabd_md5_OBJECTS = $(am_test_cabd_md5_OBJECTS)
++test_cabd_md5_DEPENDENCIES = libmscabd.la
++am__dirstamp = $(am__leading_dot)dirstamp
++am_test_cabd_memory_OBJECTS = cabd_memory.$(OBJEXT)
++test_cabd_memory_OBJECTS = $(am_test_cabd_memory_OBJECTS)
++test_cabd_memory_DEPENDENCIES = libmscabd.la
++am_test_cabd_test_OBJECTS = cabd_test.$(OBJEXT)
++test_cabd_test_OBJECTS = $(am_test_cabd_test_OBJECTS)
++test_cabd_test_DEPENDENCIES = libmscabd.la
++am_test_cabrip_OBJECTS = cabrip.$(OBJEXT)
++test_cabrip_OBJECTS = $(am_test_cabrip_OBJECTS)
++test_cabrip_DEPENDENCIES = libmscabd.la
++am_test_chmd_find_OBJECTS = chmd_find.$(OBJEXT)
++test_chmd_find_OBJECTS = $(am_test_chmd_find_OBJECTS)
++test_chmd_find_DEPENDENCIES = libmschmd.la
++am_test_chmd_md5_OBJECTS = chmd_md5.$(OBJEXT) md5.$(OBJEXT)
++test_chmd_md5_OBJECTS = $(am_test_chmd_md5_OBJECTS)
++test_chmd_md5_DEPENDENCIES = libmschmd.la
++am_test_chmd_order_OBJECTS = chmd_order.$(OBJEXT) md5.$(OBJEXT)
++test_chmd_order_OBJECTS = $(am_test_chmd_order_OBJECTS)
++test_chmd_order_DEPENDENCIES = libmschmd.la
++am_test_chminfo_OBJECTS = chminfo.$(OBJEXT)
++test_chminfo_OBJECTS = $(am_test_chminfo_OBJECTS)
++test_chminfo_DEPENDENCIES = libmschmd.la
++am_test_chmx_OBJECTS = chmx.$(OBJEXT)
++test_chmx_OBJECTS = $(am_test_chmx_OBJECTS)
++test_chmx_DEPENDENCIES = libmschmd.la
++am_test_expand_OBJECTS = expand.$(OBJEXT)
++test_expand_OBJECTS = $(am_test_expand_OBJECTS)
++test_expand_DEPENDENCIES = libmspack.la
++am_test_multifh_OBJECTS = multifh.$(OBJEXT)
++test_multifh_OBJECTS = $(am_test_multifh_OBJECTS)
++test_multifh_DEPENDENCIES = libmscabd.la
++am_test_oabx_OBJECTS = oabx.$(OBJEXT) md5.$(OBJEXT)
++test_oabx_OBJECTS = $(am_test_oabx_OBJECTS)
++test_oabx_DEPENDENCIES = libmspack.la
++DEFAULT_INCLUDES = -I. at am__isrc@
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__depfiles_maybe = depfiles
++am__mv = mv -f
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
++ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
++ $(AM_CFLAGS) $(CFLAGS)
++AM_V_CC = $(am__v_CC_ at AM_V@)
++am__v_CC_ = $(am__v_CC_ at AM_DEFAULT_V@)
++am__v_CC_0 = @echo " CC " $@;
++AM_V_at = $(am__v_at_ at AM_V@)
++am__v_at_ = $(am__v_at_ at AM_DEFAULT_V@)
++am__v_at_0 = @
++CCLD = $(CC)
++LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
++ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++ $(AM_LDFLAGS) $(LDFLAGS) -o $@
++AM_V_CCLD = $(am__v_CCLD_ at AM_V@)
++am__v_CCLD_ = $(am__v_CCLD_ at AM_DEFAULT_V@)
++am__v_CCLD_0 = @echo " CCLD " $@;
++AM_V_GEN = $(am__v_GEN_ at AM_V@)
++am__v_GEN_ = $(am__v_GEN_ at AM_DEFAULT_V@)
++am__v_GEN_0 = @echo " GEN " $@;
++SOURCES = $(libmscabd_la_SOURCES) $(libmschmd_la_SOURCES) \
++ $(libmspack_la_SOURCES) $(test_cabd_md5_SOURCES) \
++ $(test_cabd_memory_SOURCES) $(test_cabd_test_SOURCES) \
++ $(test_cabrip_SOURCES) $(test_chmd_find_SOURCES) \
++ $(test_chmd_md5_SOURCES) $(test_chmd_order_SOURCES) \
++ $(test_chminfo_SOURCES) $(test_chmx_SOURCES) \
++ $(test_expand_SOURCES) $(test_multifh_SOURCES) \
++ $(test_oabx_SOURCES)
++DIST_SOURCES = $(libmscabd_la_SOURCES) $(libmschmd_la_SOURCES) \
++ $(libmspack_la_SOURCES) $(test_cabd_md5_SOURCES) \
++ $(test_cabd_memory_SOURCES) $(test_cabd_test_SOURCES) \
++ $(test_cabrip_SOURCES) $(test_chmd_find_SOURCES) \
++ $(test_chmd_md5_SOURCES) $(test_chmd_order_SOURCES) \
++ $(test_chminfo_SOURCES) $(test_chmx_SOURCES) \
++ $(test_expand_SOURCES) $(test_multifh_SOURCES) \
++ $(test_oabx_SOURCES)
++DATA = $(pkgconfig_DATA)
++HEADERS = $(include_HEADERS)
++ETAGS = etags
++CTAGS = ctags
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++ if test -d "$(distdir)"; then \
++ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -rf "$(distdir)" \
++ || { sleep 5 && rm -rf "$(distdir)"; }; \
++ else :; fi
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
++ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++AMTAR = @AMTAR@
++AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
++AR = @AR@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
++CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
++CPP = @CPP@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++DLLTOOL = @DLLTOOL@
++DSYMUTIL = @DSYMUTIL@
++DUMPBIN = @DUMPBIN@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
++EXEEXT = @EXEEXT@
++FGREP = @FGREP@
++GREP = @GREP@
++INSTALL = @INSTALL@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++LD = @LD@
++LDFLAGS = @LDFLAGS@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
++LIBTOOL = @LIBTOOL@
++LIPO = @LIPO@
++LN_S = @LN_S@
++LTLIBOBJS = @LTLIBOBJS@
++MAKEINFO = @MAKEINFO@
++MANIFEST_TOOL = @MANIFEST_TOOL@
++MKDIR_P = @MKDIR_P@
++NM = @NM@
++NMEDIT = @NMEDIT@
++OBJDUMP = @OBJDUMP@
++OBJEXT = @OBJEXT@
++OTOOL = @OTOOL@
++OTOOL64 = @OTOOL64@
++PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_URL = @PACKAGE_URL@
++PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
++RANLIB = @RANLIB@
++SED = @SED@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
++VERSION = @VERSION@
++abs_builddir = @abs_builddir@
++abs_srcdir = @abs_srcdir@
++abs_top_builddir = @abs_top_builddir@
++abs_top_srcdir = @abs_top_srcdir@
++ac_ct_AR = @ac_ct_AR@
++ac_ct_CC = @ac_ct_CC@
++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++builddir = @builddir@
++datadir = @datadir@
++datarootdir = @datarootdir@
++docdir = @docdir@
++dvidir = @dvidir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++htmldir = @htmldir@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localedir = @localedir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++pdfdir = @pdfdir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++psdir = @psdir@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++srcdir = @srcdir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++top_build_prefix = @top_build_prefix@
++top_builddir = @top_builddir@
++top_srcdir = @top_srcdir@
++EXTRA_DIST = $(srcdir)/debian/* $(srcdir)/doc/* $(srcdir)/test/test_files/*/*
++pkgconfigdir = $(libdir)/pkgconfig
++pkgconfig_DATA = libmspack.pc
++ACLOCAL_AMFLAGS = -I m4
++AM_CFLAGS = $(am__append_1) $(am__append_2)
++AM_CPPFLAGS = -I$(top_srcdir)/mspack -I$(top_srcdir)/test
++lib_LTLIBRARIES = libmspack.la
++include_HEADERS = mspack/mspack.h
++noinst_LTLIBRARIES = libmscabd.la libmschmd.la
++libmspack_la_SOURCES = mspack/mspack.h \
++ mspack/system.h mspack/system.c \
++ mspack/cab.h mspack/cabc.c mspack/cabd.c \
++ mspack/chm.h mspack/chmc.c mspack/chmd.c \
++ mspack/hlp.h mspack/hlpc.c mspack/hlpd.c \
++ mspack/lit.h mspack/litc.c mspack/litd.c \
++ mspack/kwaj.h mspack/kwajc.c mspack/kwajd.c \
++ mspack/szdd.h mspack/szddc.c mspack/szddd.c \
++ mspack/oab.h mspack/oabc.c mspack/oabd.c \
++ mspack/lzx.h mspack/lzxc.c mspack/lzxd.c \
++ mspack/mszip.h mspack/mszipc.c mspack/mszipd.c \
++ mspack/qtm.h mspack/qtmd.c \
++ mspack/readbits.h mspack/readhuff.h \
++ mspack/lzss.h mspack/lzssd.c \
++ mspack/des.h mspack/sha.h \
++ mspack/crc32.c mspack/crc32.h
++
++libmspack_la_LDFLAGS = -export-symbols-regex '^mspack_' -version-info 1:0:1
++libmscabd_la_SOURCES = mspack/mspack.h \
++ mspack/system.h mspack/system.c \
++ mspack/cab.h mspack/cabd.c \
++ mspack/lzx.h mspack/lzxd.c \
++ mspack/mszip.h mspack/mszipd.c \
++ mspack/qtm.h mspack/qtmd.c \
++ mspack/readbits.h mspack/readhuff.h
++
++libmscabd_la_LDFLAGS = -export-symbols-regex '^mspack_'
++libmschmd_la_SOURCES = mspack/mspack.h \
++ mspack/system.h mspack/system.c \
++ mspack/chm.h mspack/chmd.c \
++ mspack/lzx.h mspack/lzxd.c \
++ mspack/readbits.h mspack/readhuff.h
++
++libmschmd_la_LDFLAGS = -export-symbols-regex '^mspack_'
++test_chmx_SOURCES = test/chmx.c test/error.h libmschmd.la
++test_chmx_LDADD = libmschmd.la
++test_chmd_md5_SOURCES = test/chmd_md5.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmschmd.la
++
++test_chmd_md5_LDADD = libmschmd.la
++test_cabd_md5_SOURCES = test/cabd_md5.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmscabd.la
++
++test_cabd_md5_LDADD = libmscabd.la
++test_cabd_test_SOURCES = test/cabd_test.c libmscabd.la
++test_cabd_test_LDADD = libmscabd.la
++test_cabrip_SOURCES = test/cabrip.c libmscabd.la
++test_cabrip_LDADD = libmscabd.la
++test_cabd_memory_SOURCES = test/cabd_memory.c libmscabd.la
++test_cabd_memory_LDADD = libmscabd.la
++test_chminfo_SOURCES = test/chminfo.c libmschmd.la
++test_chminfo_LDADD = libmschmd.la
++test_multifh_SOURCES = test/multifh.c libmscabd.la
++test_multifh_LDADD = libmscabd.la
++test_expand_SOURCES = test/expand.c test/error.h libmspack.la
++test_expand_LDADD = libmspack.la
++test_chmd_find_SOURCES = test/chmd_find.c test/error.h libmschmd.la
++test_chmd_find_LDADD = libmschmd.la
++test_chmd_order_SOURCES = test/chmd_order.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmschmd.la
++
++test_chmd_order_LDADD = libmschmd.la
++test_oabx_SOURCES = test/oabx.c test/md5.c test/md5.h test/md5_fh.h \
++ test/error.h libmspack.la
++
++test_oabx_LDADD = libmspack.la
++all: config.h
++ $(MAKE) $(AM_MAKEFLAGS) all-am
++
++.SUFFIXES:
++.SUFFIXES: .c .lo .o .obj
++am--refresh: Makefile
++ @:
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
++ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
++ && exit 0; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
++ $(am__cd) $(top_srcdir) && \
++ $(AUTOMAKE) --gnu Makefile
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ echo ' $(SHELL) ./config.status'; \
++ $(SHELL) ./config.status;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++ esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ $(SHELL) ./config.status --recheck
++
++$(top_srcdir)/configure: $(am__configure_deps)
++ $(am__cd) $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
++$(am__aclocal_m4_deps):
++
++config.h: stamp-h1
++ @if test ! -f $@; then rm -f stamp-h1; else :; fi
++ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
++
++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
++ @rm -f stamp-h1
++ cd $(top_builddir) && $(SHELL) ./config.status config.h
++$(srcdir)/config.h.in: $(am__configure_deps)
++ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
++ rm -f stamp-h1
++ touch $@
++
++distclean-hdr:
++ -rm -f config.h stamp-h1
++doc/Makefile: $(top_builddir)/config.status $(top_srcdir)/doc/Makefile.in
++ cd $(top_builddir) && $(SHELL) ./config.status $@
++doc/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/Doxyfile.in
++ cd $(top_builddir) && $(SHELL) ./config.status $@
++libmspack.pc: $(top_builddir)/config.status $(srcdir)/libmspack.pc.in
++ cd $(top_builddir) && $(SHELL) ./config.status $@
++install-libLTLIBRARIES: $(lib_LTLIBRARIES)
++ @$(NORMAL_INSTALL)
++ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
++ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
++ list2=; for p in $$list; do \
++ if test -f $$p; then \
++ list2="$$list2 $$p"; \
++ else :; fi; \
++ done; \
++ test -z "$$list2" || { \
++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
++ }
++
++uninstall-libLTLIBRARIES:
++ @$(NORMAL_UNINSTALL)
++ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
++ for p in $$list; do \
++ $(am__strip_dir) \
++ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
++ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
++ done
++
++clean-libLTLIBRARIES:
++ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
++ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
++ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
++ test "$$dir" != "$$p" || dir=.; \
++ echo "rm -f \"$${dir}/so_locations\""; \
++ rm -f "$${dir}/so_locations"; \
++ done
++
++clean-noinstLTLIBRARIES:
++ -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
++ @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
++ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
++ test "$$dir" != "$$p" || dir=.; \
++ echo "rm -f \"$${dir}/so_locations\""; \
++ rm -f "$${dir}/so_locations"; \
++ done
++libmscabd.la: $(libmscabd_la_OBJECTS) $(libmscabd_la_DEPENDENCIES) $(EXTRA_libmscabd_la_DEPENDENCIES)
++ $(AM_V_CCLD)$(libmscabd_la_LINK) $(libmscabd_la_OBJECTS) $(libmscabd_la_LIBADD) $(LIBS)
++libmschmd.la: $(libmschmd_la_OBJECTS) $(libmschmd_la_DEPENDENCIES) $(EXTRA_libmschmd_la_DEPENDENCIES)
++ $(AM_V_CCLD)$(libmschmd_la_LINK) $(libmschmd_la_OBJECTS) $(libmschmd_la_LIBADD) $(LIBS)
++libmspack.la: $(libmspack_la_OBJECTS) $(libmspack_la_DEPENDENCIES) $(EXTRA_libmspack_la_DEPENDENCIES)
++ $(AM_V_CCLD)$(libmspack_la_LINK) -rpath $(libdir) $(libmspack_la_OBJECTS) $(libmspack_la_LIBADD) $(LIBS)
++
++clean-noinstPROGRAMS:
++ @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
++ echo " rm -f" $$list; \
++ rm -f $$list || exit $$?; \
++ test -n "$(EXEEXT)" || exit 0; \
++ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
++ echo " rm -f" $$list; \
++ rm -f $$list
++test/$(am__dirstamp):
++ @$(MKDIR_P) test
++ @: > test/$(am__dirstamp)
++test/cabd_md5$(EXEEXT): $(test_cabd_md5_OBJECTS) $(test_cabd_md5_DEPENDENCIES) $(EXTRA_test_cabd_md5_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/cabd_md5$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_cabd_md5_OBJECTS) $(test_cabd_md5_LDADD) $(LIBS)
++test/cabd_memory$(EXEEXT): $(test_cabd_memory_OBJECTS) $(test_cabd_memory_DEPENDENCIES) $(EXTRA_test_cabd_memory_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/cabd_memory$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_cabd_memory_OBJECTS) $(test_cabd_memory_LDADD) $(LIBS)
++test/cabd_test$(EXEEXT): $(test_cabd_test_OBJECTS) $(test_cabd_test_DEPENDENCIES) $(EXTRA_test_cabd_test_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/cabd_test$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_cabd_test_OBJECTS) $(test_cabd_test_LDADD) $(LIBS)
++test/cabrip$(EXEEXT): $(test_cabrip_OBJECTS) $(test_cabrip_DEPENDENCIES) $(EXTRA_test_cabrip_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/cabrip$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_cabrip_OBJECTS) $(test_cabrip_LDADD) $(LIBS)
++test/chmd_find$(EXEEXT): $(test_chmd_find_OBJECTS) $(test_chmd_find_DEPENDENCIES) $(EXTRA_test_chmd_find_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/chmd_find$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_chmd_find_OBJECTS) $(test_chmd_find_LDADD) $(LIBS)
++test/chmd_md5$(EXEEXT): $(test_chmd_md5_OBJECTS) $(test_chmd_md5_DEPENDENCIES) $(EXTRA_test_chmd_md5_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/chmd_md5$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_chmd_md5_OBJECTS) $(test_chmd_md5_LDADD) $(LIBS)
++test/chmd_order$(EXEEXT): $(test_chmd_order_OBJECTS) $(test_chmd_order_DEPENDENCIES) $(EXTRA_test_chmd_order_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/chmd_order$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_chmd_order_OBJECTS) $(test_chmd_order_LDADD) $(LIBS)
++test/chminfo$(EXEEXT): $(test_chminfo_OBJECTS) $(test_chminfo_DEPENDENCIES) $(EXTRA_test_chminfo_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/chminfo$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_chminfo_OBJECTS) $(test_chminfo_LDADD) $(LIBS)
++test/chmx$(EXEEXT): $(test_chmx_OBJECTS) $(test_chmx_DEPENDENCIES) $(EXTRA_test_chmx_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/chmx$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_chmx_OBJECTS) $(test_chmx_LDADD) $(LIBS)
++test/expand$(EXEEXT): $(test_expand_OBJECTS) $(test_expand_DEPENDENCIES) $(EXTRA_test_expand_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/expand$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_expand_OBJECTS) $(test_expand_LDADD) $(LIBS)
++test/multifh$(EXEEXT): $(test_multifh_OBJECTS) $(test_multifh_DEPENDENCIES) $(EXTRA_test_multifh_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/multifh$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_multifh_OBJECTS) $(test_multifh_LDADD) $(LIBS)
++test/oabx$(EXEEXT): $(test_oabx_OBJECTS) $(test_oabx_DEPENDENCIES) $(EXTRA_test_oabx_DEPENDENCIES) test/$(am__dirstamp)
++ @rm -f test/oabx$(EXEEXT)
++ $(AM_V_CCLD)$(LINK) $(test_oabx_OBJECTS) $(test_oabx_LDADD) $(LIBS)
++
++mostlyclean-compile:
++ -rm -f *.$(OBJEXT)
++
++distclean-compile:
++ -rm -f *.tab.c
++
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cabc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cabd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cabd_md5.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cabd_memory.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cabd_test.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/cabrip.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chmc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chmd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chmd_find.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chmd_md5.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chmd_order.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chminfo.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/chmx.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/crc32.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/expand.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/hlpc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/hlpd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/kwajc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/kwajd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/litc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/litd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lzssd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lzxc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/lzxd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/md5.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/mszipc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/mszipd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/multifh.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/oabc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/oabd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/oabx.Po at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/qtmd.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/system.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/szddc.Plo at am__quote@
++ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/szddd.Plo at am__quote@
++
++.c.o:
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c $<
++
++.c.obj:
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
++
++.c.lo:
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LTCOMPILE) -c -o $@ $<
++
++system.lo: mspack/system.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT system.lo -MD -MP -MF $(DEPDIR)/system.Tpo -c -o system.lo `test -f 'mspack/system.c' || echo '$(srcdir)/'`mspack/system.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/system.Tpo $(DEPDIR)/system.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/system.c' object='system.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o system.lo `test -f 'mspack/system.c' || echo '$(srcdir)/'`mspack/system.c
++
++cabd.lo: mspack/cabd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd.lo -MD -MP -MF $(DEPDIR)/cabd.Tpo -c -o cabd.lo `test -f 'mspack/cabd.c' || echo '$(srcdir)/'`mspack/cabd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd.Tpo $(DEPDIR)/cabd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/cabd.c' object='cabd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd.lo `test -f 'mspack/cabd.c' || echo '$(srcdir)/'`mspack/cabd.c
++
++lzxd.lo: mspack/lzxd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzxd.lo -MD -MP -MF $(DEPDIR)/lzxd.Tpo -c -o lzxd.lo `test -f 'mspack/lzxd.c' || echo '$(srcdir)/'`mspack/lzxd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzxd.Tpo $(DEPDIR)/lzxd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/lzxd.c' object='lzxd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzxd.lo `test -f 'mspack/lzxd.c' || echo '$(srcdir)/'`mspack/lzxd.c
++
++mszipd.lo: mspack/mszipd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT mszipd.lo -MD -MP -MF $(DEPDIR)/mszipd.Tpo -c -o mszipd.lo `test -f 'mspack/mszipd.c' || echo '$(srcdir)/'`mspack/mszipd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mszipd.Tpo $(DEPDIR)/mszipd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/mszipd.c' object='mszipd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o mszipd.lo `test -f 'mspack/mszipd.c' || echo '$(srcdir)/'`mspack/mszipd.c
++
++qtmd.lo: mspack/qtmd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT qtmd.lo -MD -MP -MF $(DEPDIR)/qtmd.Tpo -c -o qtmd.lo `test -f 'mspack/qtmd.c' || echo '$(srcdir)/'`mspack/qtmd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/qtmd.Tpo $(DEPDIR)/qtmd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/qtmd.c' object='qtmd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o qtmd.lo `test -f 'mspack/qtmd.c' || echo '$(srcdir)/'`mspack/qtmd.c
++
++chmd.lo: mspack/chmd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd.lo -MD -MP -MF $(DEPDIR)/chmd.Tpo -c -o chmd.lo `test -f 'mspack/chmd.c' || echo '$(srcdir)/'`mspack/chmd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd.Tpo $(DEPDIR)/chmd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/chmd.c' object='chmd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd.lo `test -f 'mspack/chmd.c' || echo '$(srcdir)/'`mspack/chmd.c
++
++cabc.lo: mspack/cabc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabc.lo -MD -MP -MF $(DEPDIR)/cabc.Tpo -c -o cabc.lo `test -f 'mspack/cabc.c' || echo '$(srcdir)/'`mspack/cabc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabc.Tpo $(DEPDIR)/cabc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/cabc.c' object='cabc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabc.lo `test -f 'mspack/cabc.c' || echo '$(srcdir)/'`mspack/cabc.c
++
++chmc.lo: mspack/chmc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmc.lo -MD -MP -MF $(DEPDIR)/chmc.Tpo -c -o chmc.lo `test -f 'mspack/chmc.c' || echo '$(srcdir)/'`mspack/chmc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmc.Tpo $(DEPDIR)/chmc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/chmc.c' object='chmc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmc.lo `test -f 'mspack/chmc.c' || echo '$(srcdir)/'`mspack/chmc.c
++
++hlpc.lo: mspack/hlpc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT hlpc.lo -MD -MP -MF $(DEPDIR)/hlpc.Tpo -c -o hlpc.lo `test -f 'mspack/hlpc.c' || echo '$(srcdir)/'`mspack/hlpc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/hlpc.Tpo $(DEPDIR)/hlpc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/hlpc.c' object='hlpc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o hlpc.lo `test -f 'mspack/hlpc.c' || echo '$(srcdir)/'`mspack/hlpc.c
++
++hlpd.lo: mspack/hlpd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT hlpd.lo -MD -MP -MF $(DEPDIR)/hlpd.Tpo -c -o hlpd.lo `test -f 'mspack/hlpd.c' || echo '$(srcdir)/'`mspack/hlpd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/hlpd.Tpo $(DEPDIR)/hlpd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/hlpd.c' object='hlpd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o hlpd.lo `test -f 'mspack/hlpd.c' || echo '$(srcdir)/'`mspack/hlpd.c
++
++litc.lo: mspack/litc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT litc.lo -MD -MP -MF $(DEPDIR)/litc.Tpo -c -o litc.lo `test -f 'mspack/litc.c' || echo '$(srcdir)/'`mspack/litc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/litc.Tpo $(DEPDIR)/litc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/litc.c' object='litc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o litc.lo `test -f 'mspack/litc.c' || echo '$(srcdir)/'`mspack/litc.c
++
++litd.lo: mspack/litd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT litd.lo -MD -MP -MF $(DEPDIR)/litd.Tpo -c -o litd.lo `test -f 'mspack/litd.c' || echo '$(srcdir)/'`mspack/litd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/litd.Tpo $(DEPDIR)/litd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/litd.c' object='litd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o litd.lo `test -f 'mspack/litd.c' || echo '$(srcdir)/'`mspack/litd.c
++
++kwajc.lo: mspack/kwajc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kwajc.lo -MD -MP -MF $(DEPDIR)/kwajc.Tpo -c -o kwajc.lo `test -f 'mspack/kwajc.c' || echo '$(srcdir)/'`mspack/kwajc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/kwajc.Tpo $(DEPDIR)/kwajc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/kwajc.c' object='kwajc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kwajc.lo `test -f 'mspack/kwajc.c' || echo '$(srcdir)/'`mspack/kwajc.c
++
++kwajd.lo: mspack/kwajd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT kwajd.lo -MD -MP -MF $(DEPDIR)/kwajd.Tpo -c -o kwajd.lo `test -f 'mspack/kwajd.c' || echo '$(srcdir)/'`mspack/kwajd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/kwajd.Tpo $(DEPDIR)/kwajd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/kwajd.c' object='kwajd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o kwajd.lo `test -f 'mspack/kwajd.c' || echo '$(srcdir)/'`mspack/kwajd.c
++
++szddc.lo: mspack/szddc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT szddc.lo -MD -MP -MF $(DEPDIR)/szddc.Tpo -c -o szddc.lo `test -f 'mspack/szddc.c' || echo '$(srcdir)/'`mspack/szddc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/szddc.Tpo $(DEPDIR)/szddc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/szddc.c' object='szddc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o szddc.lo `test -f 'mspack/szddc.c' || echo '$(srcdir)/'`mspack/szddc.c
++
++szddd.lo: mspack/szddd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT szddd.lo -MD -MP -MF $(DEPDIR)/szddd.Tpo -c -o szddd.lo `test -f 'mspack/szddd.c' || echo '$(srcdir)/'`mspack/szddd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/szddd.Tpo $(DEPDIR)/szddd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/szddd.c' object='szddd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o szddd.lo `test -f 'mspack/szddd.c' || echo '$(srcdir)/'`mspack/szddd.c
++
++oabc.lo: mspack/oabc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT oabc.lo -MD -MP -MF $(DEPDIR)/oabc.Tpo -c -o oabc.lo `test -f 'mspack/oabc.c' || echo '$(srcdir)/'`mspack/oabc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/oabc.Tpo $(DEPDIR)/oabc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/oabc.c' object='oabc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o oabc.lo `test -f 'mspack/oabc.c' || echo '$(srcdir)/'`mspack/oabc.c
++
++oabd.lo: mspack/oabd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT oabd.lo -MD -MP -MF $(DEPDIR)/oabd.Tpo -c -o oabd.lo `test -f 'mspack/oabd.c' || echo '$(srcdir)/'`mspack/oabd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/oabd.Tpo $(DEPDIR)/oabd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/oabd.c' object='oabd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o oabd.lo `test -f 'mspack/oabd.c' || echo '$(srcdir)/'`mspack/oabd.c
++
++lzxc.lo: mspack/lzxc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzxc.lo -MD -MP -MF $(DEPDIR)/lzxc.Tpo -c -o lzxc.lo `test -f 'mspack/lzxc.c' || echo '$(srcdir)/'`mspack/lzxc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzxc.Tpo $(DEPDIR)/lzxc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/lzxc.c' object='lzxc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzxc.lo `test -f 'mspack/lzxc.c' || echo '$(srcdir)/'`mspack/lzxc.c
++
++mszipc.lo: mspack/mszipc.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT mszipc.lo -MD -MP -MF $(DEPDIR)/mszipc.Tpo -c -o mszipc.lo `test -f 'mspack/mszipc.c' || echo '$(srcdir)/'`mspack/mszipc.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mszipc.Tpo $(DEPDIR)/mszipc.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/mszipc.c' object='mszipc.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o mszipc.lo `test -f 'mspack/mszipc.c' || echo '$(srcdir)/'`mspack/mszipc.c
++
++lzssd.lo: mspack/lzssd.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT lzssd.lo -MD -MP -MF $(DEPDIR)/lzssd.Tpo -c -o lzssd.lo `test -f 'mspack/lzssd.c' || echo '$(srcdir)/'`mspack/lzssd.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/lzssd.Tpo $(DEPDIR)/lzssd.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/lzssd.c' object='lzssd.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o lzssd.lo `test -f 'mspack/lzssd.c' || echo '$(srcdir)/'`mspack/lzssd.c
++
++crc32.lo: mspack/crc32.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crc32.lo -MD -MP -MF $(DEPDIR)/crc32.Tpo -c -o crc32.lo `test -f 'mspack/crc32.c' || echo '$(srcdir)/'`mspack/crc32.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/crc32.Tpo $(DEPDIR)/crc32.Plo
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='mspack/crc32.c' object='crc32.lo' libtool=yes @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crc32.lo `test -f 'mspack/crc32.c' || echo '$(srcdir)/'`mspack/crc32.c
++
++cabd_md5.o: test/cabd_md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd_md5.o -MD -MP -MF $(DEPDIR)/cabd_md5.Tpo -c -o cabd_md5.o `test -f 'test/cabd_md5.c' || echo '$(srcdir)/'`test/cabd_md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd_md5.Tpo $(DEPDIR)/cabd_md5.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabd_md5.c' object='cabd_md5.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd_md5.o `test -f 'test/cabd_md5.c' || echo '$(srcdir)/'`test/cabd_md5.c
++
++cabd_md5.obj: test/cabd_md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd_md5.obj -MD -MP -MF $(DEPDIR)/cabd_md5.Tpo -c -o cabd_md5.obj `if test -f 'test/cabd_md5.c'; then $(CYGPATH_W) 'test/cabd_md5.c'; else $(CYGPATH_W) '$(srcdir)/test/cabd_md5.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd_md5.Tpo $(DEPDIR)/cabd_md5.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabd_md5.c' object='cabd_md5.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd_md5.obj `if test -f 'test/cabd_md5.c'; then $(CYGPATH_W) 'test/cabd_md5.c'; else $(CYGPATH_W) '$(srcdir)/test/cabd_md5.c'; fi`
++
++md5.o: test/md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5.o -MD -MP -MF $(DEPDIR)/md5.Tpo -c -o md5.o `test -f 'test/md5.c' || echo '$(srcdir)/'`test/md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/md5.Tpo $(DEPDIR)/md5.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/md5.c' object='md5.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5.o `test -f 'test/md5.c' || echo '$(srcdir)/'`test/md5.c
++
++md5.obj: test/md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5.obj -MD -MP -MF $(DEPDIR)/md5.Tpo -c -o md5.obj `if test -f 'test/md5.c'; then $(CYGPATH_W) 'test/md5.c'; else $(CYGPATH_W) '$(srcdir)/test/md5.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/md5.Tpo $(DEPDIR)/md5.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/md5.c' object='md5.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5.obj `if test -f 'test/md5.c'; then $(CYGPATH_W) 'test/md5.c'; else $(CYGPATH_W) '$(srcdir)/test/md5.c'; fi`
++
++cabd_memory.o: test/cabd_memory.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd_memory.o -MD -MP -MF $(DEPDIR)/cabd_memory.Tpo -c -o cabd_memory.o `test -f 'test/cabd_memory.c' || echo '$(srcdir)/'`test/cabd_memory.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd_memory.Tpo $(DEPDIR)/cabd_memory.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabd_memory.c' object='cabd_memory.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd_memory.o `test -f 'test/cabd_memory.c' || echo '$(srcdir)/'`test/cabd_memory.c
++
++cabd_memory.obj: test/cabd_memory.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd_memory.obj -MD -MP -MF $(DEPDIR)/cabd_memory.Tpo -c -o cabd_memory.obj `if test -f 'test/cabd_memory.c'; then $(CYGPATH_W) 'test/cabd_memory.c'; else $(CYGPATH_W) '$(srcdir)/test/cabd_memory.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd_memory.Tpo $(DEPDIR)/cabd_memory.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabd_memory.c' object='cabd_memory.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd_memory.obj `if test -f 'test/cabd_memory.c'; then $(CYGPATH_W) 'test/cabd_memory.c'; else $(CYGPATH_W) '$(srcdir)/test/cabd_memory.c'; fi`
++
++cabd_test.o: test/cabd_test.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd_test.o -MD -MP -MF $(DEPDIR)/cabd_test.Tpo -c -o cabd_test.o `test -f 'test/cabd_test.c' || echo '$(srcdir)/'`test/cabd_test.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd_test.Tpo $(DEPDIR)/cabd_test.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabd_test.c' object='cabd_test.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd_test.o `test -f 'test/cabd_test.c' || echo '$(srcdir)/'`test/cabd_test.c
++
++cabd_test.obj: test/cabd_test.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabd_test.obj -MD -MP -MF $(DEPDIR)/cabd_test.Tpo -c -o cabd_test.obj `if test -f 'test/cabd_test.c'; then $(CYGPATH_W) 'test/cabd_test.c'; else $(CYGPATH_W) '$(srcdir)/test/cabd_test.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabd_test.Tpo $(DEPDIR)/cabd_test.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabd_test.c' object='cabd_test.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabd_test.obj `if test -f 'test/cabd_test.c'; then $(CYGPATH_W) 'test/cabd_test.c'; else $(CYGPATH_W) '$(srcdir)/test/cabd_test.c'; fi`
++
++cabrip.o: test/cabrip.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabrip.o -MD -MP -MF $(DEPDIR)/cabrip.Tpo -c -o cabrip.o `test -f 'test/cabrip.c' || echo '$(srcdir)/'`test/cabrip.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabrip.Tpo $(DEPDIR)/cabrip.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabrip.c' object='cabrip.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabrip.o `test -f 'test/cabrip.c' || echo '$(srcdir)/'`test/cabrip.c
++
++cabrip.obj: test/cabrip.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT cabrip.obj -MD -MP -MF $(DEPDIR)/cabrip.Tpo -c -o cabrip.obj `if test -f 'test/cabrip.c'; then $(CYGPATH_W) 'test/cabrip.c'; else $(CYGPATH_W) '$(srcdir)/test/cabrip.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/cabrip.Tpo $(DEPDIR)/cabrip.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/cabrip.c' object='cabrip.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o cabrip.obj `if test -f 'test/cabrip.c'; then $(CYGPATH_W) 'test/cabrip.c'; else $(CYGPATH_W) '$(srcdir)/test/cabrip.c'; fi`
++
++chmd_find.o: test/chmd_find.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd_find.o -MD -MP -MF $(DEPDIR)/chmd_find.Tpo -c -o chmd_find.o `test -f 'test/chmd_find.c' || echo '$(srcdir)/'`test/chmd_find.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd_find.Tpo $(DEPDIR)/chmd_find.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmd_find.c' object='chmd_find.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd_find.o `test -f 'test/chmd_find.c' || echo '$(srcdir)/'`test/chmd_find.c
++
++chmd_find.obj: test/chmd_find.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd_find.obj -MD -MP -MF $(DEPDIR)/chmd_find.Tpo -c -o chmd_find.obj `if test -f 'test/chmd_find.c'; then $(CYGPATH_W) 'test/chmd_find.c'; else $(CYGPATH_W) '$(srcdir)/test/chmd_find.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd_find.Tpo $(DEPDIR)/chmd_find.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmd_find.c' object='chmd_find.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd_find.obj `if test -f 'test/chmd_find.c'; then $(CYGPATH_W) 'test/chmd_find.c'; else $(CYGPATH_W) '$(srcdir)/test/chmd_find.c'; fi`
++
++chmd_md5.o: test/chmd_md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd_md5.o -MD -MP -MF $(DEPDIR)/chmd_md5.Tpo -c -o chmd_md5.o `test -f 'test/chmd_md5.c' || echo '$(srcdir)/'`test/chmd_md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd_md5.Tpo $(DEPDIR)/chmd_md5.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmd_md5.c' object='chmd_md5.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd_md5.o `test -f 'test/chmd_md5.c' || echo '$(srcdir)/'`test/chmd_md5.c
++
++chmd_md5.obj: test/chmd_md5.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd_md5.obj -MD -MP -MF $(DEPDIR)/chmd_md5.Tpo -c -o chmd_md5.obj `if test -f 'test/chmd_md5.c'; then $(CYGPATH_W) 'test/chmd_md5.c'; else $(CYGPATH_W) '$(srcdir)/test/chmd_md5.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd_md5.Tpo $(DEPDIR)/chmd_md5.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmd_md5.c' object='chmd_md5.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd_md5.obj `if test -f 'test/chmd_md5.c'; then $(CYGPATH_W) 'test/chmd_md5.c'; else $(CYGPATH_W) '$(srcdir)/test/chmd_md5.c'; fi`
++
++chmd_order.o: test/chmd_order.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd_order.o -MD -MP -MF $(DEPDIR)/chmd_order.Tpo -c -o chmd_order.o `test -f 'test/chmd_order.c' || echo '$(srcdir)/'`test/chmd_order.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd_order.Tpo $(DEPDIR)/chmd_order.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmd_order.c' object='chmd_order.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd_order.o `test -f 'test/chmd_order.c' || echo '$(srcdir)/'`test/chmd_order.c
++
++chmd_order.obj: test/chmd_order.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmd_order.obj -MD -MP -MF $(DEPDIR)/chmd_order.Tpo -c -o chmd_order.obj `if test -f 'test/chmd_order.c'; then $(CYGPATH_W) 'test/chmd_order.c'; else $(CYGPATH_W) '$(srcdir)/test/chmd_order.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmd_order.Tpo $(DEPDIR)/chmd_order.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmd_order.c' object='chmd_order.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmd_order.obj `if test -f 'test/chmd_order.c'; then $(CYGPATH_W) 'test/chmd_order.c'; else $(CYGPATH_W) '$(srcdir)/test/chmd_order.c'; fi`
++
++chminfo.o: test/chminfo.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chminfo.o -MD -MP -MF $(DEPDIR)/chminfo.Tpo -c -o chminfo.o `test -f 'test/chminfo.c' || echo '$(srcdir)/'`test/chminfo.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chminfo.Tpo $(DEPDIR)/chminfo.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chminfo.c' object='chminfo.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chminfo.o `test -f 'test/chminfo.c' || echo '$(srcdir)/'`test/chminfo.c
++
++chminfo.obj: test/chminfo.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chminfo.obj -MD -MP -MF $(DEPDIR)/chminfo.Tpo -c -o chminfo.obj `if test -f 'test/chminfo.c'; then $(CYGPATH_W) 'test/chminfo.c'; else $(CYGPATH_W) '$(srcdir)/test/chminfo.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chminfo.Tpo $(DEPDIR)/chminfo.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chminfo.c' object='chminfo.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chminfo.obj `if test -f 'test/chminfo.c'; then $(CYGPATH_W) 'test/chminfo.c'; else $(CYGPATH_W) '$(srcdir)/test/chminfo.c'; fi`
++
++chmx.o: test/chmx.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmx.o -MD -MP -MF $(DEPDIR)/chmx.Tpo -c -o chmx.o `test -f 'test/chmx.c' || echo '$(srcdir)/'`test/chmx.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmx.Tpo $(DEPDIR)/chmx.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmx.c' object='chmx.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmx.o `test -f 'test/chmx.c' || echo '$(srcdir)/'`test/chmx.c
++
++chmx.obj: test/chmx.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chmx.obj -MD -MP -MF $(DEPDIR)/chmx.Tpo -c -o chmx.obj `if test -f 'test/chmx.c'; then $(CYGPATH_W) 'test/chmx.c'; else $(CYGPATH_W) '$(srcdir)/test/chmx.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/chmx.Tpo $(DEPDIR)/chmx.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/chmx.c' object='chmx.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chmx.obj `if test -f 'test/chmx.c'; then $(CYGPATH_W) 'test/chmx.c'; else $(CYGPATH_W) '$(srcdir)/test/chmx.c'; fi`
++
++expand.o: test/expand.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT expand.o -MD -MP -MF $(DEPDIR)/expand.Tpo -c -o expand.o `test -f 'test/expand.c' || echo '$(srcdir)/'`test/expand.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/expand.Tpo $(DEPDIR)/expand.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/expand.c' object='expand.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o expand.o `test -f 'test/expand.c' || echo '$(srcdir)/'`test/expand.c
++
++expand.obj: test/expand.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT expand.obj -MD -MP -MF $(DEPDIR)/expand.Tpo -c -o expand.obj `if test -f 'test/expand.c'; then $(CYGPATH_W) 'test/expand.c'; else $(CYGPATH_W) '$(srcdir)/test/expand.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/expand.Tpo $(DEPDIR)/expand.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/expand.c' object='expand.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o expand.obj `if test -f 'test/expand.c'; then $(CYGPATH_W) 'test/expand.c'; else $(CYGPATH_W) '$(srcdir)/test/expand.c'; fi`
++
++multifh.o: test/multifh.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT multifh.o -MD -MP -MF $(DEPDIR)/multifh.Tpo -c -o multifh.o `test -f 'test/multifh.c' || echo '$(srcdir)/'`test/multifh.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/multifh.Tpo $(DEPDIR)/multifh.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/multifh.c' object='multifh.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o multifh.o `test -f 'test/multifh.c' || echo '$(srcdir)/'`test/multifh.c
++
++multifh.obj: test/multifh.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT multifh.obj -MD -MP -MF $(DEPDIR)/multifh.Tpo -c -o multifh.obj `if test -f 'test/multifh.c'; then $(CYGPATH_W) 'test/multifh.c'; else $(CYGPATH_W) '$(srcdir)/test/multifh.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/multifh.Tpo $(DEPDIR)/multifh.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/multifh.c' object='multifh.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o multifh.obj `if test -f 'test/multifh.c'; then $(CYGPATH_W) 'test/multifh.c'; else $(CYGPATH_W) '$(srcdir)/test/multifh.c'; fi`
++
++oabx.o: test/oabx.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT oabx.o -MD -MP -MF $(DEPDIR)/oabx.Tpo -c -o oabx.o `test -f 'test/oabx.c' || echo '$(srcdir)/'`test/oabx.c
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/oabx.Tpo $(DEPDIR)/oabx.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/oabx.c' object='oabx.o' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o oabx.o `test -f 'test/oabx.c' || echo '$(srcdir)/'`test/oabx.c
++
++oabx.obj: test/oabx.c
++ at am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT oabx.obj -MD -MP -MF $(DEPDIR)/oabx.Tpo -c -o oabx.obj `if test -f 'test/oabx.c'; then $(CYGPATH_W) 'test/oabx.c'; else $(CYGPATH_W) '$(srcdir)/test/oabx.c'; fi`
++ at am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/oabx.Tpo $(DEPDIR)/oabx.Po
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='test/oabx.c' object='oabx.obj' libtool=no @AMDEPBACKSLASH@
++ at AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++ at am__fastdepCC_FALSE@ $(AM_V_CC at am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o oabx.obj `if test -f 'test/oabx.c'; then $(CYGPATH_W) 'test/oabx.c'; else $(CYGPATH_W) '$(srcdir)/test/oabx.c'; fi`
++
++mostlyclean-libtool:
++ -rm -f *.lo
++
++clean-libtool:
++ -rm -rf .libs _libs
++ -rm -rf test/.libs test/_libs
++
++distclean-libtool:
++ -rm -f libtool config.lt
++install-pkgconfigDATA: $(pkgconfig_DATA)
++ @$(NORMAL_INSTALL)
++ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
++ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
++ for p in $$list; do \
++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++ echo "$$d$$p"; \
++ done | $(am__base_list) | \
++ while read files; do \
++ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
++ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
++ done
++
++uninstall-pkgconfigDATA:
++ @$(NORMAL_UNINSTALL)
++ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
++ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
++install-includeHEADERS: $(include_HEADERS)
++ @$(NORMAL_INSTALL)
++ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
++ @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
++ for p in $$list; do \
++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++ echo "$$d$$p"; \
++ done | $(am__base_list) | \
++ while read files; do \
++ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
++ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
++ done
++
++uninstall-includeHEADERS:
++ @$(NORMAL_UNINSTALL)
++ @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
++ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
++ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
++
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ mkid -fID $$unique
++tags: TAGS
++
++TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ set x; \
++ here=`pwd`; \
++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ shift; \
++ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ if test $$# -gt 0; then \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ "$$@" $$unique; \
++ else \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$unique; \
++ fi; \
++ fi
++ctags: CTAGS
++CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
++ END { if (nonempty) { for (i in files) print i; }; }'`; \
++ test -z "$(CTAGS_ARGS)$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && $(am__cd) $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) "$$here"
++
++distclean-tags:
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
++
++distdir: $(DISTFILES)
++ $(am__remove_distdir)
++ test -d "$(distdir)" || mkdir "$(distdir)"
++ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
++ list='$(DISTFILES)'; \
++ dist_files=`for file in $$list; do echo $$file; done | \
++ sed -e "s|^$$srcdirstrip/||;t" \
++ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
++ case $$dist_files in \
++ */*) $(MKDIR_P) `echo "$$dist_files" | \
++ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
++ sort -u` ;; \
++ esac; \
++ for file in $$dist_files; do \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ if test -d $$d/$$file; then \
++ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test -d "$(distdir)/$$file"; then \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
++ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
++ fi; \
++ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
++ else \
++ test -f "$(distdir)/$$file" \
++ || cp -p $$d/$$file "$(distdir)/$$file" \
++ || exit 1; \
++ fi; \
++ done
++ $(MAKE) $(AM_MAKEFLAGS) \
++ top_distdir="$(top_distdir)" distdir="$(distdir)" \
++ dist-hook
++ -test -n "$(am__skip_mode_fix)" \
++ || find "$(distdir)" -type d ! -perm -755 \
++ -exec chmod u+rwx,go+rx {} \; -o \
++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
++ || chmod -R a+r "$(distdir)"
++dist-gzip: distdir
++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++dist-bzip2: distdir
++ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
++ $(am__remove_distdir)
++
++dist-lzip: distdir
++ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
++ $(am__remove_distdir)
++
++dist-lzma: distdir
++ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
++ $(am__remove_distdir)
++
++dist-xz: distdir
++ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
++ $(am__remove_distdir)
++
++dist-tarZ: distdir
++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
++ $(am__remove_distdir)
++
++dist-shar: distdir
++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++ $(am__remove_distdir)
++
++dist-zip: distdir
++ -rm -f $(distdir).zip
++ zip -rq $(distdir).zip $(distdir)
++ $(am__remove_distdir)
++
++dist dist-all: distdir
++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++# This target untars the dist file and tries a VPATH configuration. Then
++# it guarantees that the distribution is self-contained by making another
++# tarfile.
++distcheck: dist
++ case '$(DIST_ARCHIVES)' in \
++ *.tar.gz*) \
++ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
++ *.tar.bz2*) \
++ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
++ *.tar.lzma*) \
++ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
++ *.tar.lz*) \
++ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
++ *.tar.xz*) \
++ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
++ *.tar.Z*) \
++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
++ *.shar.gz*) \
++ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
++ *.zip*) \
++ unzip $(distdir).zip ;;\
++ esac
++ chmod -R a-w $(distdir); chmod a+w $(distdir)
++ mkdir $(distdir)/_build
++ mkdir $(distdir)/_inst
++ chmod a-w $(distdir)
++ test -d $(distdir)/_build || exit 0; \
++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++ && am__cwd=`pwd` \
++ && $(am__cd) $(distdir)/_build \
++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
++ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
++ $(DISTCHECK_CONFIGURE_FLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
++ && $(MAKE) $(AM_MAKEFLAGS) check \
++ && $(MAKE) $(AM_MAKEFLAGS) install \
++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++ distuninstallcheck \
++ && chmod -R a-w "$$dc_install_base" \
++ && ({ \
++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++ } || { rm -rf "$$dc_destdir"; exit 1; }) \
++ && rm -rf "$$dc_destdir" \
++ && $(MAKE) $(AM_MAKEFLAGS) dist \
++ && rm -rf $(DIST_ARCHIVES) \
++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
++ && cd "$$am__cwd" \
++ || exit 1
++ $(am__remove_distdir)
++ @(echo "$(distdir) archives ready for distribution: "; \
++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
++distuninstallcheck:
++ @test -n '$(distuninstallcheck_dir)' || { \
++ echo 'ERROR: trying to run $@ with an empty' \
++ '$$(distuninstallcheck_dir)' >&2; \
++ exit 1; \
++ }; \
++ $(am__cd) '$(distuninstallcheck_dir)' || { \
++ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
++ exit 1; \
++ }; \
++ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ if test -n "$(DESTDIR)"; then \
++ echo " (check DESTDIR support)"; \
++ fi ; \
++ $(distuninstallcheck_listfiles) ; \
++ exit 1; } >&2
++distcleancheck: distclean
++ @if test '$(srcdir)' = . ; then \
++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++ exit 1 ; \
++ fi
++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left in build directory after distclean:" ; \
++ $(distcleancheck_listfiles) ; \
++ exit 1; } >&2
++check-am: all-am
++check: check-am
++all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS) \
++ config.h
++installdirs:
++ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
++ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
++ done
++install: install-am
++install-exec: install-exec-am
++install-data: install-data-am
++uninstall: uninstall-am
++
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
++
++installcheck: installcheck-am
++install-strip:
++ if test -z '$(STRIP)'; then \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ install; \
++ else \
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
++ fi
++mostlyclean-generic:
++
++clean-generic:
++
++distclean-generic:
++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
++ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
++ -rm -f test/$(am__dirstamp)
++
++maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
++
++clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
++ clean-noinstLTLIBRARIES clean-noinstPROGRAMS mostlyclean-am
++
++distclean: distclean-am
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf ./$(DEPDIR)
++ -rm -f Makefile
++distclean-am: clean-am distclean-compile distclean-generic \
++ distclean-hdr distclean-libtool distclean-tags
++
++dvi: dvi-am
++
++dvi-am:
++
++html: html-am
++
++html-am:
++
++info: info-am
++
++info-am:
++
++install-data-am: install-includeHEADERS install-pkgconfigDATA
++
++install-dvi: install-dvi-am
++
++install-dvi-am:
++
++install-exec-am: install-libLTLIBRARIES
++
++install-html: install-html-am
++
++install-html-am:
++
++install-info: install-info-am
++
++install-info-am:
++
++install-man:
++
++install-pdf: install-pdf-am
++
++install-pdf-am:
++
++install-ps: install-ps-am
++
++install-ps-am:
++
++installcheck-am:
++
++maintainer-clean: maintainer-clean-am
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf $(top_srcdir)/autom4te.cache
++ -rm -rf ./$(DEPDIR)
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-compile mostlyclean-generic \
++ mostlyclean-libtool
++
++pdf: pdf-am
++
++pdf-am:
++
++ps: ps-am
++
++ps-am:
++
++uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \
++ uninstall-pkgconfigDATA
++
++.MAKE: all install-am install-strip
++
++.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
++ clean-generic clean-libLTLIBRARIES clean-libtool \
++ clean-noinstLTLIBRARIES clean-noinstPROGRAMS ctags dist \
++ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-lzma \
++ dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
++ distclean-compile distclean-generic distclean-hdr \
++ distclean-libtool distclean-tags distcleancheck distdir \
++ distuninstallcheck dvi dvi-am html html-am info info-am \
++ install install-am install-data install-data-am install-dvi \
++ install-dvi-am install-exec install-exec-am install-html \
++ install-html-am install-includeHEADERS install-info \
++ install-info-am install-libLTLIBRARIES install-man install-pdf \
++ install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
++ install-strip installcheck installcheck-am installdirs \
++ maintainer-clean maintainer-clean-generic mostlyclean \
++ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
++ pdf pdf-am ps ps-am tags uninstall uninstall-am \
++ uninstall-includeHEADERS uninstall-libLTLIBRARIES \
++ uninstall-pkgconfigDATA
++
++
++dist-hook:
++ -rm -f $(distdir)/*.la
++
++# Tell versions [3.59,3.63) of GNU make to not export all variables.
++# Otherwise a system limit (for SysV at least) may be exceeded.
++.NOEXPORT:
+diff --git a/libclamav/libmspack-0.4alpha/NEWS b/libclamav/libmspack-0.4alpha/NEWS
+new file mode 100644
+index 000000000000..e69de29bb2d1
+diff --git a/libclamav/libmspack-0.4alpha/README b/libclamav/libmspack-0.4alpha/README
+new file mode 100644
+index 000000000000..4361b5516e75
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/README
+@@ -0,0 +1,130 @@
++libmspack 0.4alpha
++
++The purpose of libmspack is to provide compressors and decompressors,
++archivers and dearchivers for Microsoft compression formats: CAB, CHM, WIM,
++LIT, HLP, KWAJ and SZDD. It is also designed to be easily embeddable,
++stable, robust and resource-efficient.
++
++The library is not intended as a generalised "any archiver" interface.
++Users of the library must explicitly choose the format they intend to work
++with.
++
++All special features of the above formats will be covered as fully as
++possible -- for example, CAB's multi-part cabinet sets, or CHM's fast
++lookup indices. All compression methods used by the formats will be
++implemented as completely as possible.
++
++However, other than what is required for access to these formats and their
++features, no other functionality is intended. There is no file metadata
++translation functionality. All file I/O is abstracted, although a default
++implementation using the standard C library is provided.
++
++
++DOCUMENTATION
++
++The API documentation is stored in the doc/ directory. It is generated
++automatically from mspack.h with doxygen. It is also available online at
++http://www.cabextract.org.uk/libmspack/doc/
++
++
++BUILDING / INSTALLING
++
++./configure
++make
++make install
++
++This will install the main libmspack library and mspack.h header file.
++Some other libraries and executables are built, but not installed.
++
++If building from the Subversion repository, running rebuild.sh will create
++all the automatically generated files like the configure script, and will
++then ./configure, make and make distcheck. Running cleanup.sh will perform
++a thorough clean, deleting all automatically generated files.
++
++In addition to gcc, you also need the following for building from Subversion:
++
++- at least autoconf 2.57
++- at least automake 1.7
++- libtool
++
++This is an alpha release. Unless you are in a position to package the
++libmspack library for the environment you intend to run your application,
++it is recommended that you do not rely on users of your software having
++the binary library installed and instead you should include the libmspack
++source files directly in your application's build environment.
++
++
++LEGAL ISSUES
++
++The the best of my knowledge, libmspack does not infringe on any
++compression or decompression patents. However, this is not legal
++advice, and it is recommended that you perform your own patent search.
++
++libmspack is licensed under the LGPL - see COPYING.LIB in this directory.
++
++The LGPL requires you to build libmspack as a stand alone library then link
++your code to it using a linker. I personally grant you some extra rights:
++you can incorporate libmspack's source code wholly or partially in your own
++code, without having to build and link libmspack as an independent library,
++provided you meet ALL of the following conditions:
++
++1. ANY modifications to the existing libmspack source code are published and
++ distributed under the LGPL license.
++2. You MUST NOT use libmspack function calls, structures or definitions unless
++ they are defined in the public library interface "mspack.h".
++3. When distributing your code, you MUST make clear your code uses libmspack,
++ and either include the full libmspack distribution with your code, or
++ provide access to it as per clause 4 of the LGPL.
++
++EXAMPLE CODE
++
++There are a number of useful programs in the test/ directory which
++exercise and demonstrate libmspack's features.
++
++cabd_c10 - Tests the CAB decompressor on the C10 collection.
++cabd_compare - Compares the CAB decompressor with Microsoft's EXTRACT.EXE
++cabd_md5 - Prints the MD5 checksums of all files within a CAB file/set.
++cabd_memory - An mspack_system implementation that reads/writes to memory.
++cabd_test - Regression tests for libmspack's CAB decompression.
++cabrip - Extracts any CAB files embedded in another file.
++chmd_compare - Compares the CHM decompressor to Microsoft's HH.EXE
++chmd_find - Fast-finds a file within a CHM file.
++chmd_md5 - Prints the MD5 checksums of all files within a CHM file.
++chmd_order - Tests extracting files in a CHM file in four different ways.
++chminfo - Prints verbose information about CHM file structures.
++chmx - Extracts all files in a CHM file to disk.
++expand - Extracts an SZDD or KWAJ file.
++msdecompile_md5- Runs Microsoft's HH.EXE -DECOMPILE via WINE.
++msexpand_md5 - Runs Microsoft's EXTRACT.EXE via WINE.
++multifh - An mspack_system implementation that can simultaneously work
++ on in-memory images, raw file descriptors, open file handles
++ and regular disk files.
++
++Here is a simple example of usage, which will create a CAB decompressor,
++then use that to open an existing Microsoft CAB file called "example.cab",
++and list the names of all the files contained in that cab.
++
++#include <stdio.h>
++#include <unistd.h>
++#include <mspack.h>
++
++int main() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++ struct mscabd_file *file;
++ int test;
++
++ MSPACK_SYS_SELFTEST(test);
++ if (test != MSPACK_ERR_OK) exit(0);
++
++ if ((cabd = mspack_create_cab_decompressor(NULL))) {
++ if ((cab = cabd->open(cabd, "example.cab"))) {
++ for (file = cab->files; file; file = file->next) {
++ printf("%s\n", file->filename);
++ }
++ cabd->close(cabd, cab);
++ }
++ mspack_destroy_cab_decompressor(cabd);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/TODO b/libclamav/libmspack-0.4alpha/TODO
+new file mode 100644
+index 000000000000..df1095d66332
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/TODO
+@@ -0,0 +1,8 @@
++* CAB compression
++* cabd_find(): if many bytes are missing from the end of a cabinet, it should still find it
++* CHM compression
++* HLP: everything
++* LIT: everything
++* SZDD/KWAJ: compression
++* WIM: everything
++* chm: make chunk cache size user-controllable
+diff --git a/libclamav/libmspack-0.4alpha/aclocal.m4 b/libclamav/libmspack-0.4alpha/aclocal.m4
+new file mode 100644
+index 000000000000..22b5a662417c
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/aclocal.m4
+@@ -0,0 +1,1033 @@
++# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
++# Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
++[m4_warning([this file was generated for autoconf 2.68.
++You have another version of autoconf. It may work, but is not guaranteed to.
++If you have problems, you may need to regenerate the build system entirely.
++To do so, use the procedure documented by the package, typically `autoreconf'.])])
++
++# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
++# Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 1
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++# (This private macro should not be called outside this file.)
++AC_DEFUN([AM_AUTOMAKE_VERSION],
++[am__api_version='1.11'
++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
++dnl require some minimum version. Point them to the right macro.
++m4_if([$1], [1.11.3], [],
++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
++])
++
++# _AM_AUTOCONF_VERSION(VERSION)
++# -----------------------------
++# aclocal traces this macro to find the Autoconf version.
++# This is a private macro too. Using m4_define simplifies
++# the logic in aclocal, which can simply ignore this definition.
++m4_define([_AM_AUTOCONF_VERSION], [])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
++# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++[AM_AUTOMAKE_VERSION([1.11.3])dnl
++m4_ifndef([AC_AUTOCONF_VERSION],
++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
++_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
++
++# AM_AUX_DIR_EXPAND -*- Autoconf -*-
++
++# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 1
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
++
++# AM_CONDITIONAL -*- Autoconf -*-
++
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 9
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])dnl
++AC_SUBST([$1_FALSE])dnl
++_AM_SUBST_NOTMAKE([$1_TRUE])dnl
++_AM_SUBST_NOTMAKE([$1_FALSE])dnl
++m4_define([_AM_COND_VALUE_$1], [$2])dnl
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
++else
++ $1_TRUE='#'
++ $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
++# 2010, 2011 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 12
++
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++
++
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
++
++ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
++ [$1], CXX, [depcc="$CXX" am_compiler_list=],
++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++ [$1], UPC, [depcc="$UPC" am_compiler_list=],
++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
++
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ am__universal=false
++ m4_case([$1], [CC],
++ [case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac],
++ [CXX],
++ [case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac])
++
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this. Also, some Intel
++ # versions had trouble with output in subdirs
++ am__obj=sub/conftest.${OBJEXT-o}
++ am__minus_obj="-o $am__obj"
++ case $depmode in
++ gcc)
++ # This depmode causes a compiler race in universal mode.
++ test "$am__universal" = false || continue
++ ;;
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
++ # This compiler won't grok `-c -o', but also, the minuso test has
++ # not run yet. These depmodes are late enough in the game, and
++ # so weak that their functioning should not be impacted.
++ am__obj=conftest.${OBJEXT-o}
++ am__minus_obj=
++ ;;
++ none) break ;;
++ esac
++ if depmode=$depmode \
++ source=sub/conftest.c object=$am__obj \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_$1_dependencies_compiler_type=none
++fi
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
++])
++
++
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
++])
++
++
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++ am__nodep='_no'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])dnl
++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
++AC_SUBST([am__nodep])dnl
++_AM_SUBST_NOTMAKE([am__nodep])dnl
++])
++
++# Generate code to set up dependency tracking. -*- Autoconf -*-
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++#serial 5
++
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[{
++ # Autoconf 2.62 quotes --file arguments for eval, but not when files
++ # are listed without --file. Let's play safe and only enable the eval
++ # if we detect the quoting.
++ case $CONFIG_FILES in
++ *\'*) eval set x "$CONFIG_FILES" ;;
++ *) set x $CONFIG_FILES ;;
++ esac
++ shift
++ for mf
++ do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # Grep'ing the whole file is not good either: AIX grep has a line
++ # limit of 2048, but all sed's we know have understand at least 4000.
++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
++ dirpart=`AS_DIRNAME("$mf")`
++ else
++ continue
++ fi
++ # Extract the definition of DEPDIR, am__include, and am__quote
++ # from the Makefile without running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ am__include=`sed -n 's/^am__include = //p' < "$mf"`
++ test -z "am__include" && continue
++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ # Find all dependency output files, they are included files with
++ # $(DEPDIR) in their names. We invoke sed twice because it is the
++ # simplest approach to changing $(DEPDIR) to its actual value in the
++ # expansion.
++ for file in `sed -n "
++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`AS_DIRNAME(["$file"])`
++ AS_MKDIR_P([$dirpart/$fdir])
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++ done
++}
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++
++
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled. FIXME. This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
++])
++
++# Do all the work for Automake. -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 16
++
++# This macro actually does too much. Some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.62])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++ fi
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++ [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_CC],
++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_CXX],
++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_OBJC],
++ [_AM_DEPENDENCIES(OBJC)],
++ [define([AC_PROG_OBJC],
++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
++])
++_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
++dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
++dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
++dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
++AC_CONFIG_COMMANDS_PRE(dnl
++[m4_provide_if([_AM_COMPILER_EXEEXT],
++ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
++])
++
++dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
++dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
++dnl mangled by Autoconf and run in a shell conditional statement.
++m4_define([_AC_COMPILER_EXEEXT],
++m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
++
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_arg=$1
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
++
++# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
++# Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 1
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++if test x"${install_sh}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
++ *)
++ install_sh="\${SHELL} $am_aux_dir/install-sh"
++ esac
++fi
++AC_SUBST(install_sh)])
++
++# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
++
++# Check to see how 'make' treats includes. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo this is the am__doit target
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# Ignore all kinds of additional output from `make'.
++case `$am_make -s -f confmf 2> /dev/null` in #(
++*the\ am__doit\ target*)
++ am__include=include
++ am__quote=
++ _am_result=GNU
++ ;;
++esac
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ case `$am_make -s -f confmf 2> /dev/null` in #(
++ *the\ am__doit\ target*)
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ ;;
++ esac
++fi
++AC_SUBST([am__include])
++AC_SUBST([am__quote])
++AC_MSG_RESULT([$_am_result])
++rm -f confinc confmf
++])
++
++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
++
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 6
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++AC_REQUIRE_AUX_FILE([missing])dnl
++if test x"${MISSING+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
++ *)
++ MISSING="\${SHELL} $am_aux_dir/missing" ;;
++ esac
++fi
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
++
++# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
++# Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 1
++
++# AM_PROG_MKDIR_P
++# ---------------
++# Check for `mkdir -p'.
++AC_DEFUN([AM_PROG_MKDIR_P],
++[AC_PREREQ([2.60])dnl
++AC_REQUIRE([AC_PROG_MKDIR_P])dnl
++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
++dnl while keeping a definition of mkdir_p for backward compatibility.
++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
++dnl Makefile.ins that do not define MKDIR_P, so we do our own
++dnl adjustment using top_builddir (which is defined more often than
++dnl MKDIR_P).
++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
++case $mkdir_p in
++ [[\\/$]]* | ?:[[\\/]]*) ;;
++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
++])
++
++# Helper functions for option handling. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
++# Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 5
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# --------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
++
++# Check to make sure that the build environment is sane. -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 5
++
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
++[AC_MSG_CHECKING([whether build environment is sane])
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Reject unsafe characters in $srcdir or the absolute working directory
++# name. Accept space and tab only in the latter.
++am_lf='
++'
++case `pwd` in
++ *[[\\\"\#\$\&\'\`$am_lf]]*)
++ AC_MSG_ERROR([unsafe absolute working directory name]);;
++esac
++case $srcdir in
++ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
++ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
++esac
++
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments. Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
++ # -L didn't work.
++ set X `ls -t "$srcdir/configure" conftest.file`
++ fi
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
++
++ # If neither matched, then we have a broken ls. This can happen
++ # if, for instance, CONFIG_SHELL is bash and it inherits a
++ # broken ls alias from the environment. This has actually
++ # happened. Such a system could not be considered "sane".
++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
++alias in your environment])
++ fi
++
++ test "$[2]" = conftest.file
++ )
++then
++ # Ok.
++ :
++else
++ AC_MSG_ERROR([newly created file is older than distributed files!
++Check your system clock])
++fi
++AC_MSG_RESULT(yes)])
++
++# Copyright (C) 2009, 2011 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# AM_SILENT_RULES([DEFAULT])
++# --------------------------
++# Enable less verbose build rules; with the default set to DEFAULT
++# (`yes' being less verbose, `no' or empty being verbose).
++AC_DEFUN([AM_SILENT_RULES],
++[AC_ARG_ENABLE([silent-rules],
++[ --enable-silent-rules less verbose build output (undo: `make V=1')
++ --disable-silent-rules verbose build output (undo: `make V=0')])
++case $enable_silent_rules in
++yes) AM_DEFAULT_VERBOSITY=0;;
++no) AM_DEFAULT_VERBOSITY=1;;
++*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
++esac
++dnl
++dnl A few `make' implementations (e.g., NonStop OS and NextStep)
++dnl do not support nested variable expansions.
++dnl See automake bug#9928 and bug#10237.
++am_make=${MAKE-make}
++AC_CACHE_CHECK([whether $am_make supports nested variables],
++ [am_cv_make_support_nested_variables],
++ [if AS_ECHO([['TRUE=$(BAR$(V))
++BAR0=false
++BAR1=true
++V=1
++am__doit:
++ @$(TRUE)
++.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
++ am_cv_make_support_nested_variables=yes
++else
++ am_cv_make_support_nested_variables=no
++fi])
++if test $am_cv_make_support_nested_variables = yes; then
++ dnl Using `$V' instead of `$(V)' breaks IRIX make.
++ AM_V='$(V)'
++ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
++else
++ AM_V=$AM_DEFAULT_VERBOSITY
++ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
++fi
++AC_SUBST([AM_V])dnl
++AM_SUBST_NOTMAKE([AM_V])dnl
++AC_SUBST([AM_DEFAULT_V])dnl
++AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
++AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
++AM_BACKSLASH='\'
++AC_SUBST([AM_BACKSLASH])dnl
++_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
++])
++
++# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 1
++
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
++
++# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 3
++
++# _AM_SUBST_NOTMAKE(VARIABLE)
++# ---------------------------
++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
++# This macro is traced by Automake.
++AC_DEFUN([_AM_SUBST_NOTMAKE])
++
++# AM_SUBST_NOTMAKE(VARIABLE)
++# --------------------------
++# Public sister of _AM_SUBST_NOTMAKE.
++AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
++
++# Check how to create a tarball. -*- Autoconf -*-
++
++# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of `v7', `ustar', or `pax'.
++#
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++# tardir=directory && $(am__tar) > result.tar
++#
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++# $(am__untar) < result.tar
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility. Yes, it's still used
++# in the wild :-( We should find a proper way to deprecate it ...
++AC_SUBST([AMTAR], ['$${TAR-tar}'])
++m4_if([$1], [v7],
++ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
++ [m4_case([$1], [ustar],, [pax],,
++ [m4_fatal([Unknown tar format])])
++AC_MSG_CHECKING([how to create a $1 tar archive])
++# Loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++_am_tools=${am_cv_prog_tar_$1-$_am_tools}
++# Do not fold the above two line into one, because Tru64 sh and
++# Solaris sh will not grok spaces in the rhs of `-'.
++for _am_tool in $_am_tools
++do
++ case $_am_tool in
++ gnutar)
++ for _am_tar in tar gnutar gtar;
++ do
++ AM_RUN_LOG([$_am_tar --version]) && break
++ done
++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++ am__untar="$_am_tar -xf -"
++ ;;
++ plaintar)
++ # Must skip GNU tar: if it does not support --format= it doesn't create
++ # ustar tarball either.
++ (tar --version) >/dev/null 2>&1 && continue
++ am__tar='tar chf - "$$tardir"'
++ am__tar_='tar chf - "$tardir"'
++ am__untar='tar xf -'
++ ;;
++ pax)
++ am__tar='pax -L -x $1 -w "$$tardir"'
++ am__tar_='pax -L -x $1 -w "$tardir"'
++ am__untar='pax -r'
++ ;;
++ cpio)
++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++ am__untar='cpio -i -H $1 -d'
++ ;;
++ none)
++ am__tar=false
++ am__tar_=false
++ am__untar=false
++ ;;
++ esac
++
++ # If the value was cached, stop now. We just wanted to have am__tar
++ # and am__untar set.
++ test -n "${am_cv_prog_tar_$1}" && break
++
++ # tar/untar a dummy directory, and stop if the command works
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ echo GrepMe > conftest.dir/file
++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++ rm -rf conftest.dir
++ if test -s conftest.tar; then
++ AM_RUN_LOG([$am__untar <conftest.tar])
++ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
++ fi
++done
++rm -rf conftest.dir
++
++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++AC_MSG_RESULT([$am_cv_prog_tar_$1])])
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
++
++m4_include([m4/libtool.m4])
++m4_include([m4/ltoptions.m4])
++m4_include([m4/ltsugar.m4])
++m4_include([m4/ltversion.m4])
++m4_include([m4/lt~obsolete.m4])
+diff --git a/libclamav/libmspack-0.4alpha/config.guess b/libclamav/libmspack-0.4alpha/config.guess
+new file mode 100755
+index 000000000000..d622a44e551f
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/config.guess
+@@ -0,0 +1,1530 @@
++#! /bin/sh
++# Attempt to guess a canonical system name.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
++# 2011, 2012 Free Software Foundation, Inc.
++
++timestamp='2012-02-10'
++
++# This file is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, see <http://www.gnu.org/licenses/>.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Originally written by Per Bothner. Please send patches (context
++# diff format) to <config-patches at gnu.org> and include a ChangeLog
++# entry.
++#
++# This script attempts to guess a canonical system name similar to
++# config.sub. If it succeeds, it prints the system name on stdout, and
++# exits with 0. Otherwise, it exits with 1.
++#
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Operation modes:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to <config-patches at gnu.org>."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
++Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help" >&2
++ exit 1 ;;
++ * )
++ break ;;
++ esac
++done
++
++if test $# != 0; then
++ echo "$me: too many arguments$help" >&2
++ exit 1
++fi
++
++trap 'exit 1' 1 2 15
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,) echo "int x;" > $dummy.c ;
++ for c in cc gcc c89 c99 ; do
++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++ CC_FOR_BUILD="$c"; break ;
++ fi ;
++ done ;
++ if test x"$CC_FOR_BUILD" = x ; then
++ CC_FOR_BUILD=no_compiler_found ;
++ fi
++ ;;
++ ,,*) CC_FOR_BUILD=$CC ;;
++ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
++esac ; set_cc_for_build= ;'
++
++# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
++# (ghazi at noc.rutgers.edu 1994-08-24)
++if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
++ PATH=$PATH:/.attbin ; export PATH
++fi
++
++UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
++UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
++UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
++
++# Note: order is significant - the case branches are not exclusive.
++
++case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
++ *:NetBSD:*:*)
++ # NetBSD (nbsd) targets should (where applicable) match one or
++ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
++ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
++ # switched to ELF, *-*-netbsd* would select the old
++ # object file format. This provides both forward
++ # compatibility and a consistent mechanism for selecting the
++ # object file format.
++ #
++ # Note: NetBSD doesn't particularly care about the vendor
++ # portion of the name. We always set it to "unknown".
++ sysctl="sysctl -n hw.machine_arch"
++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++ case "${UNAME_MACHINE_ARCH}" in
++ armeb) machine=armeb-unknown ;;
++ arm*) machine=arm-unknown ;;
++ sh3el) machine=shl-unknown ;;
++ sh3eb) machine=sh-unknown ;;
++ sh5el) machine=sh5le-unknown ;;
++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
++ esac
++ # The Operating System including object format, if it has switched
++ # to ELF recently, or will in the future.
++ case "${UNAME_MACHINE_ARCH}" in
++ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++ eval $set_cc_for_build
++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ELF__
++ then
++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++ # Return netbsd for either. FIX?
++ os=netbsd
++ else
++ os=netbsdelf
++ fi
++ ;;
++ *)
++ os=netbsd
++ ;;
++ esac
++ # The OS release
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "${UNAME_VERSION}" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ ;;
++ esac
++ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
++ # contains redundant information, the shorter form:
++ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
++ echo "${machine}-${os}${release}"
++ exit ;;
++ *:OpenBSD:*:*)
++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++ exit ;;
++ *:ekkoBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++ exit ;;
++ *:SolidBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
++ exit ;;
++ macppc:MirBSD:*:*)
++ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
++ *:MirBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
++ alpha:OSF1:*:*)
++ case $UNAME_RELEASE in
++ *4.0)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
++ ;;
++ *5.*)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++ ;;
++ esac
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE="alpha" ;;
++ "EV5 (21164)")
++ UNAME_MACHINE="alphaev5" ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE="alphaev56" ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE="alphapca56" ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE="alphapca57" ;;
++ "EV6 (21264)")
++ UNAME_MACHINE="alphaev6" ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE="alphaev67" ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE="alphaev69" ;;
++ "EV7 (21364)")
++ UNAME_MACHINE="alphaev7" ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE="alphaev79" ;;
++ esac
++ # A Pn.n version is a patched version.
++ # A Vn.n version is a released version.
++ # A Tn.n version is a released field test version.
++ # A Xn.n version is an unreleased experimental baselevel.
++ # 1.2 uses "1.2" for uname -r.
++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
++ exitcode=$?
++ trap '' 0
++ exit $exitcode ;;
++ Alpha\ *:Windows_NT*:*)
++ # How do we know it's Interix rather than the generic POSIX subsystem?
++ # Should we change UNAME_MACHINE based on the output of uname instead
++ # of the specific Alpha model?
++ echo alpha-pc-interix
++ exit ;;
++ 21064:Windows_NT:50:3)
++ echo alpha-dec-winnt3.5
++ exit ;;
++ Amiga*:UNIX_System_V:4.0:*)
++ echo m68k-unknown-sysv4
++ exit ;;
++ *:[Aa]miga[Oo][Ss]:*:*)
++ echo ${UNAME_MACHINE}-unknown-amigaos
++ exit ;;
++ *:[Mm]orph[Oo][Ss]:*:*)
++ echo ${UNAME_MACHINE}-unknown-morphos
++ exit ;;
++ *:OS/390:*:*)
++ echo i370-ibm-openedition
++ exit ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit ;;
++ *:OS400:*:*)
++ echo powerpc-ibm-os400
++ exit ;;
++ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
++ echo arm-acorn-riscix${UNAME_RELEASE}
++ exit ;;
++ arm:riscos:*:*|arm:RISCOS:*:*)
++ echo arm-unknown-riscos
++ exit ;;
++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
++ echo hppa1.1-hitachi-hiuxmpp
++ exit ;;
++ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
++ # akee at wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
++ if test "`(/bin/universe) 2>/dev/null`" = att ; then
++ echo pyramid-pyramid-sysv3
++ else
++ echo pyramid-pyramid-bsd
++ fi
++ exit ;;
++ NILE*:*:*:dcosx)
++ echo pyramid-pyramid-svr4
++ exit ;;
++ DRS?6000:unix:4.0:6*)
++ echo sparc-icl-nx6
++ exit ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7; exit ;;
++ esac ;;
++ s390x:SunOS:*:*)
++ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4H:SunOS:5.*:*)
++ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
++ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
++ echo i386-pc-auroraux${UNAME_RELEASE}
++ exit ;;
++ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
++ eval $set_cc_for_build
++ SUN_ARCH="i386"
++ # If there is a compiler, see if it is configured for 64-bit objects.
++ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
++ # This test works for both compilers.
++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_64BIT_ARCH >/dev/null
++ then
++ SUN_ARCH="x86_64"
++ fi
++ fi
++ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4*:SunOS:6*:*)
++ # According to config.sub, this is the proper way to canonicalize
++ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
++ # it's likely to be more like Solaris than SunOS4.
++ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4*:SunOS:*:*)
++ case "`/usr/bin/arch -k`" in
++ Series*|S4*)
++ UNAME_RELEASE=`uname -v`
++ ;;
++ esac
++ # Japanese Language versions have a version number like `4.1.3-JL'.
++ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
++ exit ;;
++ sun3*:SunOS:*:*)
++ echo m68k-sun-sunos${UNAME_RELEASE}
++ exit ;;
++ sun*:*:4.2BSD:*)
++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
++ case "`/bin/arch`" in
++ sun3)
++ echo m68k-sun-sunos${UNAME_RELEASE}
++ ;;
++ sun4)
++ echo sparc-sun-sunos${UNAME_RELEASE}
++ ;;
++ esac
++ exit ;;
++ aushp:SunOS:*:*)
++ echo sparc-auspex-sunos${UNAME_RELEASE}
++ exit ;;
++ # The situation for MiNT is a little confusing. The machine name
++ # can be virtually everything (everything which is not
++ # "atarist" or "atariste" at least should have a processor
++ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
++ # to the lowercase version "mint" (or "freemint"). Finally
++ # the system name "TOS" denotes a system which is actually not
++ # MiNT. But MiNT is downward compatible to TOS, so this should
++ # be no problem.
++ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
++ echo m68k-atari-mint${UNAME_RELEASE}
++ exit ;;
++ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
++ echo m68k-atari-mint${UNAME_RELEASE}
++ exit ;;
++ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
++ echo m68k-atari-mint${UNAME_RELEASE}
++ exit ;;
++ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
++ echo m68k-milan-mint${UNAME_RELEASE}
++ exit ;;
++ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
++ echo m68k-hades-mint${UNAME_RELEASE}
++ exit ;;
++ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
++ echo m68k-unknown-mint${UNAME_RELEASE}
++ exit ;;
++ m68k:machten:*:*)
++ echo m68k-apple-machten${UNAME_RELEASE}
++ exit ;;
++ powerpc:machten:*:*)
++ echo powerpc-apple-machten${UNAME_RELEASE}
++ exit ;;
++ RISC*:Mach:*:*)
++ echo mips-dec-mach_bsd4.3
++ exit ;;
++ RISC*:ULTRIX:*:*)
++ echo mips-dec-ultrix${UNAME_RELEASE}
++ exit ;;
++ VAX*:ULTRIX*:*:*)
++ echo vax-dec-ultrix${UNAME_RELEASE}
++ exit ;;
++ 2020:CLIX:*:* | 2430:CLIX:*:*)
++ echo clipper-intergraph-clix${UNAME_RELEASE}
++ exit ;;
++ mips:*:*:UMIPS | mips:*:*:RISCos)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++#ifdef __cplusplus
++#include <stdio.h> /* for printf() prototype */
++ int main (int argc, char *argv[]) {
++#else
++ int main (argc, argv) int argc; char *argv[]; {
++#endif
++ #if defined (host_mips) && defined (MIPSEB)
++ #if defined (SYSTYPE_SYSV)
++ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
++ #endif
++ #if defined (SYSTYPE_SVR4)
++ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
++ #endif
++ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
++ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
++ #endif
++ #endif
++ exit (-1);
++ }
++EOF
++ $CC_FOR_BUILD -o $dummy $dummy.c &&
++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++ SYSTEM_NAME=`$dummy $dummyarg` &&
++ { echo "$SYSTEM_NAME"; exit; }
++ echo mips-mips-riscos${UNAME_RELEASE}
++ exit ;;
++ Motorola:PowerMAX_OS:*:*)
++ echo powerpc-motorola-powermax
++ exit ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:Power_UNIX:*:*)
++ echo powerpc-harris-powerunix
++ exit ;;
++ m88k:CX/UX:7*:*)
++ echo m88k-harris-cxux7
++ exit ;;
++ m88k:*:4*:R4*)
++ echo m88k-motorola-sysv4
++ exit ;;
++ m88k:*:3*:R3*)
++ echo m88k-motorola-sysv3
++ exit ;;
++ AViiON:dgux:*:*)
++ # DG/UX returns AViiON for all architectures
++ UNAME_PROCESSOR=`/usr/bin/uname -p`
++ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
++ then
++ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
++ [ ${TARGET_BINARY_INTERFACE}x = x ]
++ then
++ echo m88k-dg-dgux${UNAME_RELEASE}
++ else
++ echo m88k-dg-dguxbcs${UNAME_RELEASE}
++ fi
++ else
++ echo i586-dg-dgux${UNAME_RELEASE}
++ fi
++ exit ;;
++ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
++ echo m88k-dolphin-sysv3
++ exit ;;
++ M88*:*:R3*:*)
++ # Delta 88k system running SVR3
++ echo m88k-motorola-sysv3
++ exit ;;
++ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
++ echo m88k-tektronix-sysv3
++ exit ;;
++ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
++ echo m68k-tektronix-bsd
++ exit ;;
++ *:IRIX*:*:*)
++ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
++ exit ;;
++ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
++ i*86:AIX:*:*)
++ echo i386-ibm-aix
++ exit ;;
++ ia64:AIX:*:*)
++ if [ -x /usr/bin/oslevel ] ; then
++ IBM_REV=`/usr/bin/oslevel`
++ else
++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++ fi
++ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++ exit ;;
++ *:AIX:2:3)
++ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include <sys/systemcfg.h>
++
++ main()
++ {
++ if (!__power_pc())
++ exit(1);
++ puts("powerpc-ibm-aix3.2.5");
++ exit(0);
++ }
++EOF
++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++ then
++ echo "$SYSTEM_NAME"
++ else
++ echo rs6000-ibm-aix3.2.5
++ fi
++ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
++ echo rs6000-ibm-aix3.2.4
++ else
++ echo rs6000-ibm-aix3.2
++ fi
++ exit ;;
++ *:AIX:*:[4567])
++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
++ IBM_ARCH=rs6000
++ else
++ IBM_ARCH=powerpc
++ fi
++ if [ -x /usr/bin/oslevel ] ; then
++ IBM_REV=`/usr/bin/oslevel`
++ else
++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++ fi
++ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
++ exit ;;
++ *:AIX:*:*)
++ echo rs6000-ibm-aix
++ exit ;;
++ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
++ echo romp-ibm-bsd4.4
++ exit ;;
++ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
++ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
++ exit ;; # report: romp-ibm BSD 4.3
++ *:BOSX:*:*)
++ echo rs6000-bull-bosx
++ exit ;;
++ DPX/2?00:B.O.S.:*:*)
++ echo m68k-bull-sysv3
++ exit ;;
++ 9000/[34]??:4.3bsd:1.*:*)
++ echo m68k-hp-bsd
++ exit ;;
++ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
++ echo m68k-hp-bsd4.4
++ exit ;;
++ 9000/[34678]??:HP-UX:*:*)
++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++ case "${UNAME_MACHINE}" in
++ 9000/31? ) HP_ARCH=m68000 ;;
++ 9000/[34]?? ) HP_ARCH=m68k ;;
++ 9000/[678][0-9][0-9])
++ if [ -x /usr/bin/getconf ]; then
++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++ case "${sc_cpu_version}" in
++ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
++ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
++ 532) # CPU_PA_RISC2_0
++ case "${sc_kernel_bits}" in
++ 32) HP_ARCH="hppa2.0n" ;;
++ 64) HP_ARCH="hppa2.0w" ;;
++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
++ esac ;;
++ esac
++ fi
++ if [ "${HP_ARCH}" = "" ]; then
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++
++ #define _HPUX_SOURCE
++ #include <stdlib.h>
++ #include <unistd.h>
++
++ int main ()
++ {
++ #if defined(_SC_KERNEL_BITS)
++ long bits = sysconf(_SC_KERNEL_BITS);
++ #endif
++ long cpu = sysconf (_SC_CPU_VERSION);
++
++ switch (cpu)
++ {
++ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
++ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
++ case CPU_PA_RISC2_0:
++ #if defined(_SC_KERNEL_BITS)
++ switch (bits)
++ {
++ case 64: puts ("hppa2.0w"); break;
++ case 32: puts ("hppa2.0n"); break;
++ default: puts ("hppa2.0"); break;
++ } break;
++ #else /* !defined(_SC_KERNEL_BITS) */
++ puts ("hppa2.0"); break;
++ #endif
++ default: puts ("hppa1.0"); break;
++ }
++ exit (0);
++ }
++EOF
++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++ test -z "$HP_ARCH" && HP_ARCH=hppa
++ fi ;;
++ esac
++ if [ ${HP_ARCH} = "hppa2.0w" ]
++ then
++ eval $set_cc_for_build
++
++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
++ # generating 64-bit code. GNU and HP use different nomenclature:
++ #
++ # $ CC_FOR_BUILD=cc ./config.guess
++ # => hppa2.0w-hp-hpux11.23
++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++ # => hppa64-hp-hpux11.23
++
++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++ grep -q __LP64__
++ then
++ HP_ARCH="hppa2.0w"
++ else
++ HP_ARCH="hppa64"
++ fi
++ fi
++ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
++ exit ;;
++ ia64:HP-UX:*:*)
++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++ echo ia64-hp-hpux${HPUX_REV}
++ exit ;;
++ 3050*:HI-UX:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include <unistd.h>
++ int
++ main ()
++ {
++ long cpu = sysconf (_SC_CPU_VERSION);
++ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
++ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
++ results, however. */
++ if (CPU_IS_PA_RISC (cpu))
++ {
++ switch (cpu)
++ {
++ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
++ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
++ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
++ default: puts ("hppa-hitachi-hiuxwe2"); break;
++ }
++ }
++ else if (CPU_IS_HP_MC68K (cpu))
++ puts ("m68k-hitachi-hiuxwe2");
++ else puts ("unknown-hitachi-hiuxwe2");
++ exit (0);
++ }
++EOF
++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
++ echo unknown-hitachi-hiuxwe2
++ exit ;;
++ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
++ echo hppa1.1-hp-bsd
++ exit ;;
++ 9000/8??:4.3bsd:*:*)
++ echo hppa1.0-hp-bsd
++ exit ;;
++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
++ echo hppa1.0-hp-mpeix
++ exit ;;
++ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
++ echo hppa1.1-hp-osf
++ exit ;;
++ hp8??:OSF1:*:*)
++ echo hppa1.0-hp-osf
++ exit ;;
++ i*86:OSF1:*:*)
++ if [ -x /usr/sbin/sysversion ] ; then
++ echo ${UNAME_MACHINE}-unknown-osf1mk
++ else
++ echo ${UNAME_MACHINE}-unknown-osf1
++ fi
++ exit ;;
++ parisc*:Lites*:*:*)
++ echo hppa1.1-hp-lites
++ exit ;;
++ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
++ echo c1-convex-bsd
++ exit ;;
++ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
++ if getsysinfo -f scalar_acc
++ then echo c32-convex-bsd
++ else echo c2-convex-bsd
++ fi
++ exit ;;
++ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
++ echo c34-convex-bsd
++ exit ;;
++ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
++ echo c38-convex-bsd
++ exit ;;
++ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
++ echo c4-convex-bsd
++ exit ;;
++ CRAY*Y-MP:*:*:*)
++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*[A-Z]90:*:*:*)
++ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
++ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++ -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*TS:*:*:*)
++ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*T3E:*:*:*)
++ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*SV1:*:*:*)
++ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ *:UNICOS/mp:*:*)
++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ 5000:UNIX_System_V:4.*:*)
++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
++ exit ;;
++ sparc*:BSD/OS:*:*)
++ echo sparc-unknown-bsdi${UNAME_RELEASE}
++ exit ;;
++ *:BSD/OS:*:*)
++ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
++ exit ;;
++ *:FreeBSD:*:*)
++ UNAME_PROCESSOR=`/usr/bin/uname -p`
++ case ${UNAME_PROCESSOR} in
++ amd64)
++ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ *)
++ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ esac
++ exit ;;
++ i*:CYGWIN*:*)
++ echo ${UNAME_MACHINE}-pc-cygwin
++ exit ;;
++ *:MINGW*:*)
++ echo ${UNAME_MACHINE}-pc-mingw32
++ exit ;;
++ i*:MSYS*:*)
++ echo ${UNAME_MACHINE}-pc-msys
++ exit ;;
++ i*:windows32*:*)
++ # uname -m includes "-pc" on this system.
++ echo ${UNAME_MACHINE}-mingw32
++ exit ;;
++ i*:PW*:*)
++ echo ${UNAME_MACHINE}-pc-pw32
++ exit ;;
++ *:Interix*:*)
++ case ${UNAME_MACHINE} in
++ x86)
++ echo i586-pc-interix${UNAME_RELEASE}
++ exit ;;
++ authenticamd | genuineintel | EM64T)
++ echo x86_64-unknown-interix${UNAME_RELEASE}
++ exit ;;
++ IA64)
++ echo ia64-unknown-interix${UNAME_RELEASE}
++ exit ;;
++ esac ;;
++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++ echo i${UNAME_MACHINE}-pc-mks
++ exit ;;
++ 8664:Windows_NT:*)
++ echo x86_64-pc-mks
++ exit ;;
++ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
++ # How do we know it's Interix rather than the generic POSIX subsystem?
++ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
++ # UNAME_MACHINE based on the output of uname instead of i386?
++ echo i586-pc-interix
++ exit ;;
++ i*:UWIN*:*)
++ echo ${UNAME_MACHINE}-pc-uwin
++ exit ;;
++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++ echo x86_64-unknown-cygwin
++ exit ;;
++ p*:CYGWIN*:*)
++ echo powerpcle-unknown-cygwin
++ exit ;;
++ prep*:SunOS:5.*:*)
++ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ *:GNU:*:*)
++ # the GNU system
++ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
++ exit ;;
++ *:GNU/*:*:*)
++ # other systems with GNU libc and userland
++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++ exit ;;
++ i*86:Minix:*:*)
++ echo ${UNAME_MACHINE}-pc-minix
++ exit ;;
++ aarch64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ aarch64_be:Linux:*:*)
++ UNAME_MACHINE=aarch64_be
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ alpha:Linux:*:*)
++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++ EV5) UNAME_MACHINE=alphaev5 ;;
++ EV56) UNAME_MACHINE=alphaev56 ;;
++ PCA56) UNAME_MACHINE=alphapca56 ;;
++ PCA57) UNAME_MACHINE=alphapca56 ;;
++ EV6) UNAME_MACHINE=alphaev6 ;;
++ EV67) UNAME_MACHINE=alphaev67 ;;
++ EV68*) UNAME_MACHINE=alphaev68 ;;
++ esac
++ objdump --private-headers /bin/sh | grep -q ld.so.1
++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++ exit ;;
++ arm*:Linux:*:*)
++ eval $set_cc_for_build
++ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_EABI__
++ then
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ else
++ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_PCS_VFP
++ then
++ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
++ else
++ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
++ fi
++ fi
++ exit ;;
++ avr32*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ cris:Linux:*:*)
++ echo ${UNAME_MACHINE}-axis-linux-gnu
++ exit ;;
++ crisv32:Linux:*:*)
++ echo ${UNAME_MACHINE}-axis-linux-gnu
++ exit ;;
++ frv:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ hexagon:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ i*86:Linux:*:*)
++ LIBC=gnu
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #ifdef __dietlibc__
++ LIBC=dietlibc
++ #endif
++EOF
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++ exit ;;
++ ia64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ m32r*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ m68*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ mips:Linux:*:* | mips64:Linux:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef ${UNAME_MACHINE}
++ #undef ${UNAME_MACHINE}el
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=${UNAME_MACHINE}el
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=${UNAME_MACHINE}
++ #else
++ CPU=
++ #endif
++ #endif
++EOF
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++ ;;
++ or32:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ padre:Linux:*:*)
++ echo sparc-unknown-linux-gnu
++ exit ;;
++ parisc64:Linux:*:* | hppa64:Linux:*:*)
++ echo hppa64-unknown-linux-gnu
++ exit ;;
++ parisc:Linux:*:* | hppa:Linux:*:*)
++ # Look for CPU level
++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++ PA7*) echo hppa1.1-unknown-linux-gnu ;;
++ PA8*) echo hppa2.0-unknown-linux-gnu ;;
++ *) echo hppa-unknown-linux-gnu ;;
++ esac
++ exit ;;
++ ppc64:Linux:*:*)
++ echo powerpc64-unknown-linux-gnu
++ exit ;;
++ ppc:Linux:*:*)
++ echo powerpc-unknown-linux-gnu
++ exit ;;
++ s390:Linux:*:* | s390x:Linux:*:*)
++ echo ${UNAME_MACHINE}-ibm-linux
++ exit ;;
++ sh64*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ sh*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ sparc:Linux:*:* | sparc64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ tile*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ vax:Linux:*:*)
++ echo ${UNAME_MACHINE}-dec-linux-gnu
++ exit ;;
++ x86_64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ xtensa*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ i*86:DYNIX/ptx:4*:*)
++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++ # earlier versions are messed up and put the nodename in both
++ # sysname and nodename.
++ echo i386-sequent-sysv4
++ exit ;;
++ i*86:UNIX_SV:4.2MP:2.*)
++ # Unixware is an offshoot of SVR4, but it has its own version
++ # number series starting with 2...
++ # I am not positive that other SVR4 systems won't match this,
++ # I just have to hope. -- rms.
++ # Use sysv4.2uw... so that sysv4* matches it.
++ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
++ exit ;;
++ i*86:OS/2:*:*)
++ # If we were able to find `uname', then EMX Unix compatibility
++ # is probably installed.
++ echo ${UNAME_MACHINE}-pc-os2-emx
++ exit ;;
++ i*86:XTS-300:*:STOP)
++ echo ${UNAME_MACHINE}-unknown-stop
++ exit ;;
++ i*86:atheos:*:*)
++ echo ${UNAME_MACHINE}-unknown-atheos
++ exit ;;
++ i*86:syllable:*:*)
++ echo ${UNAME_MACHINE}-pc-syllable
++ exit ;;
++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
++ echo i386-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ i*86:*DOS:*:*)
++ echo ${UNAME_MACHINE}-pc-msdosdjgpp
++ exit ;;
++ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
++ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
++ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
++ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
++ else
++ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
++ fi
++ exit ;;
++ i*86:*:5:[678]*)
++ # UnixWare 7.x, OpenUNIX and OpenServer 6.
++ case `/bin/uname -X | grep "^Machine"` in
++ *486*) UNAME_MACHINE=i486 ;;
++ *Pentium) UNAME_MACHINE=i586 ;;
++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++ esac
++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++ exit ;;
++ i*86:*:3.2:*)
++ if test -f /usr/options/cb.name; then
++ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
++ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
++ elif /bin/uname -X 2>/dev/null >/dev/null ; then
++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
++ && UNAME_MACHINE=i586
++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
++ && UNAME_MACHINE=i686
++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
++ && UNAME_MACHINE=i686
++ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
++ else
++ echo ${UNAME_MACHINE}-pc-sysv32
++ fi
++ exit ;;
++ pc:*:*:*)
++ # Left here for compatibility:
++ # uname -m prints for DJGPP always 'pc', but it prints nothing about
++ # the processor, so we play safe by assuming i586.
++ # Note: whatever this is, it MUST be the same as what config.sub
++ # prints for the "djgpp" host, or else GDB configury will decide that
++ # this is a cross-build.
++ echo i586-pc-msdosdjgpp
++ exit ;;
++ Intel:Mach:3*:*)
++ echo i386-pc-mach3
++ exit ;;
++ paragon:*:*:*)
++ echo i860-intel-osf1
++ exit ;;
++ i860:*:4.*:*) # i860-SVR4
++ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
++ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
++ else # Add other i860-SVR4 vendors below as they are discovered.
++ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
++ fi
++ exit ;;
++ mini*:CTIX:SYS*5:*)
++ # "miniframe"
++ echo m68010-convergent-sysv
++ exit ;;
++ mc68k:UNIX:SYSTEM5:3.51m)
++ echo m68k-convergent-sysv
++ exit ;;
++ M680?0:D-NIX:5.3:*)
++ echo m68k-diab-dnix
++ exit ;;
++ M68*:*:R3V[5678]*:*)
++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
++ OS_REL=''
++ test -r /etc/.relid \
++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4; exit; } ;;
++ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
++ OS_REL='.3'
++ test -r /etc/.relid \
++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
++ echo m68k-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ mc68030:UNIX_System_V:4.*:*)
++ echo m68k-atari-sysv4
++ exit ;;
++ TSUNAMI:LynxOS:2.*:*)
++ echo sparc-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ rs6000:LynxOS:2.*:*)
++ echo rs6000-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
++ echo powerpc-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ SM[BE]S:UNIX_SV:*:*)
++ echo mips-dde-sysv${UNAME_RELEASE}
++ exit ;;
++ RM*:ReliantUNIX-*:*:*)
++ echo mips-sni-sysv4
++ exit ;;
++ RM*:SINIX-*:*:*)
++ echo mips-sni-sysv4
++ exit ;;
++ *:SINIX-*:*:*)
++ if uname -p 2>/dev/null >/dev/null ; then
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ echo ${UNAME_MACHINE}-sni-sysv4
++ else
++ echo ns32k-sni-sysv
++ fi
++ exit ;;
++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++ # says <Richard.M.Bartel at ccMail.Census.GOV>
++ echo i586-unisys-sysv4
++ exit ;;
++ *:UNIX_System_V:4*:FTX*)
++ # From Gerald Hewes <hewes at openmarket.com>.
++ # How about differentiating between stratus architectures? -djm
++ echo hppa1.1-stratus-sysv4
++ exit ;;
++ *:*:*:FTX*)
++ # From seanf at swdc.stratus.com.
++ echo i860-stratus-sysv4
++ exit ;;
++ i*86:VOS:*:*)
++ # From Paul.Green at stratus.com.
++ echo ${UNAME_MACHINE}-stratus-vos
++ exit ;;
++ *:VOS:*:*)
++ # From Paul.Green at stratus.com.
++ echo hppa1.1-stratus-vos
++ exit ;;
++ mc68*:A/UX:*:*)
++ echo m68k-apple-aux${UNAME_RELEASE}
++ exit ;;
++ news*:NEWS-OS:6*:*)
++ echo mips-sony-newsos6
++ exit ;;
++ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
++ if [ -d /usr/nec ]; then
++ echo mips-nec-sysv${UNAME_RELEASE}
++ else
++ echo mips-unknown-sysv${UNAME_RELEASE}
++ fi
++ exit ;;
++ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
++ echo powerpc-be-beos
++ exit ;;
++ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
++ echo powerpc-apple-beos
++ exit ;;
++ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
++ echo i586-pc-beos
++ exit ;;
++ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
++ echo i586-pc-haiku
++ exit ;;
++ SX-4:SUPER-UX:*:*)
++ echo sx4-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-5:SUPER-UX:*:*)
++ echo sx5-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-6:SUPER-UX:*:*)
++ echo sx6-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-7:SUPER-UX:*:*)
++ echo sx7-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-8:SUPER-UX:*:*)
++ echo sx8-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-8R:SUPER-UX:*:*)
++ echo sx8r-nec-superux${UNAME_RELEASE}
++ exit ;;
++ Power*:Rhapsody:*:*)
++ echo powerpc-apple-rhapsody${UNAME_RELEASE}
++ exit ;;
++ *:Rhapsody:*:*)
++ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
++ exit ;;
++ *:Darwin:*:*)
++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++ case $UNAME_PROCESSOR in
++ i386)
++ eval $set_cc_for_build
++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_64BIT_ARCH >/dev/null
++ then
++ UNAME_PROCESSOR="x86_64"
++ fi
++ fi ;;
++ unknown) UNAME_PROCESSOR=powerpc ;;
++ esac
++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++ exit ;;
++ *:procnto*:*:* | *:QNX:[0123456789]*:*)
++ UNAME_PROCESSOR=`uname -p`
++ if test "$UNAME_PROCESSOR" = "x86"; then
++ UNAME_PROCESSOR=i386
++ UNAME_MACHINE=pc
++ fi
++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++ exit ;;
++ *:QNX:*:4*)
++ echo i386-pc-qnx
++ exit ;;
++ NEO-?:NONSTOP_KERNEL:*:*)
++ echo neo-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ NSE-?:NONSTOP_KERNEL:*:*)
++ echo nse-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ NSR-?:NONSTOP_KERNEL:*:*)
++ echo nsr-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ *:NonStop-UX:*:*)
++ echo mips-compaq-nonstopux
++ exit ;;
++ BS2000:POSIX*:*:*)
++ echo bs2000-siemens-sysv
++ exit ;;
++ DS/*:UNIX_System_V:*:*)
++ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
++ exit ;;
++ *:Plan9:*:*)
++ # "uname -m" is not consistent, so use $cputype instead. 386
++ # is converted to i386 for consistency with other x86
++ # operating systems.
++ if test "$cputype" = "386"; then
++ UNAME_MACHINE=i386
++ else
++ UNAME_MACHINE="$cputype"
++ fi
++ echo ${UNAME_MACHINE}-unknown-plan9
++ exit ;;
++ *:TOPS-10:*:*)
++ echo pdp10-unknown-tops10
++ exit ;;
++ *:TENEX:*:*)
++ echo pdp10-unknown-tenex
++ exit ;;
++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++ echo pdp10-dec-tops20
++ exit ;;
++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++ echo pdp10-xkl-tops20
++ exit ;;
++ *:TOPS-20:*:*)
++ echo pdp10-unknown-tops20
++ exit ;;
++ *:ITS:*:*)
++ echo pdp10-unknown-its
++ exit ;;
++ SEI:*:*:SEIUX)
++ echo mips-sei-seiux${UNAME_RELEASE}
++ exit ;;
++ *:DragonFly:*:*)
++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++ exit ;;
++ *:*VMS:*:*)
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ case "${UNAME_MACHINE}" in
++ A*) echo alpha-dec-vms ; exit ;;
++ I*) echo ia64-dec-vms ; exit ;;
++ V*) echo vax-dec-vms ; exit ;;
++ esac ;;
++ *:XENIX:*:SysV)
++ echo i386-pc-xenix
++ exit ;;
++ i*86:skyos:*:*)
++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++ exit ;;
++ i*86:rdos:*:*)
++ echo ${UNAME_MACHINE}-pc-rdos
++ exit ;;
++ i*86:AROS:*:*)
++ echo ${UNAME_MACHINE}-pc-aros
++ exit ;;
++ x86_64:VMkernel:*:*)
++ echo ${UNAME_MACHINE}-unknown-esx
++ exit ;;
++esac
++
++#echo '(No uname command or uname output not recognized.)' 1>&2
++#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
++
++eval $set_cc_for_build
++cat >$dummy.c <<EOF
++#ifdef _SEQUENT_
++# include <sys/types.h>
++# include <sys/utsname.h>
++#endif
++main ()
++{
++#if defined (sony)
++#if defined (MIPSEB)
++ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
++ I don't know.... */
++ printf ("mips-sony-bsd\n"); exit (0);
++#else
++#include <sys/param.h>
++ printf ("m68k-sony-newsos%s\n",
++#ifdef NEWSOS4
++ "4"
++#else
++ ""
++#endif
++ ); exit (0);
++#endif
++#endif
++
++#if defined (__arm) && defined (__acorn) && defined (__unix)
++ printf ("arm-acorn-riscix\n"); exit (0);
++#endif
++
++#if defined (hp300) && !defined (hpux)
++ printf ("m68k-hp-bsd\n"); exit (0);
++#endif
++
++#if defined (NeXT)
++#if !defined (__ARCHITECTURE__)
++#define __ARCHITECTURE__ "m68k"
++#endif
++ int version;
++ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
++ if (version < 4)
++ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
++ else
++ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
++ exit (0);
++#endif
++
++#if defined (MULTIMAX) || defined (n16)
++#if defined (UMAXV)
++ printf ("ns32k-encore-sysv\n"); exit (0);
++#else
++#if defined (CMU)
++ printf ("ns32k-encore-mach\n"); exit (0);
++#else
++ printf ("ns32k-encore-bsd\n"); exit (0);
++#endif
++#endif
++#endif
++
++#if defined (__386BSD__)
++ printf ("i386-pc-bsd\n"); exit (0);
++#endif
++
++#if defined (sequent)
++#if defined (i386)
++ printf ("i386-sequent-dynix\n"); exit (0);
++#endif
++#if defined (ns32000)
++ printf ("ns32k-sequent-dynix\n"); exit (0);
++#endif
++#endif
++
++#if defined (_SEQUENT_)
++ struct utsname un;
++
++ uname(&un);
++
++ if (strncmp(un.version, "V2", 2) == 0) {
++ printf ("i386-sequent-ptx2\n"); exit (0);
++ }
++ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
++ printf ("i386-sequent-ptx1\n"); exit (0);
++ }
++ printf ("i386-sequent-ptx\n"); exit (0);
++
++#endif
++
++#if defined (vax)
++# if !defined (ultrix)
++# include <sys/param.h>
++# if defined (BSD)
++# if BSD == 43
++ printf ("vax-dec-bsd4.3\n"); exit (0);
++# else
++# if BSD == 199006
++ printf ("vax-dec-bsd4.3reno\n"); exit (0);
++# else
++ printf ("vax-dec-bsd\n"); exit (0);
++# endif
++# endif
++# else
++ printf ("vax-dec-bsd\n"); exit (0);
++# endif
++# else
++ printf ("vax-dec-ultrix\n"); exit (0);
++# endif
++#endif
++
++#if defined (alliant) && defined (i860)
++ printf ("i860-alliant-bsd\n"); exit (0);
++#endif
++
++ exit (1);
++}
++EOF
++
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
++
++# Apollos put the system type in the environment.
++
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
++
++# Convex versions that predate uname can use getsysinfo(1)
++
++if [ -x /usr/convex/getsysinfo ]
++then
++ case `getsysinfo -f cpu_type` in
++ c1*)
++ echo c1-convex-bsd
++ exit ;;
++ c2*)
++ if getsysinfo -f scalar_acc
++ then echo c32-convex-bsd
++ else echo c2-convex-bsd
++ fi
++ exit ;;
++ c34*)
++ echo c34-convex-bsd
++ exit ;;
++ c38*)
++ echo c38-convex-bsd
++ exit ;;
++ c4*)
++ echo c4-convex-bsd
++ exit ;;
++ esac
++fi
++
++cat >&2 <<EOF
++$0: unable to guess system type
++
++This script, last modified $timestamp, has failed to recognize
++the operating system you are using. It is advised that you
++download the most up to date version of the config scripts from
++
++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++and
++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++If the version you run ($0) is already up to date, please
++send the following data and any information you think might be
++pertinent to <config-patches at gnu.org> in order to provide the needed
++information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo = `(hostinfo) 2>/dev/null`
++/bin/universe = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = ${UNAME_MACHINE}
++UNAME_RELEASE = ${UNAME_RELEASE}
++UNAME_SYSTEM = ${UNAME_SYSTEM}
++UNAME_VERSION = ${UNAME_VERSION}
++EOF
++
++exit 1
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+diff --git a/libclamav/libmspack-0.4alpha/config.h.in b/libclamav/libmspack-0.4alpha/config.h.in
+new file mode 100644
+index 000000000000..3c763df74f7a
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/config.h.in
+@@ -0,0 +1,113 @@
++/* config.h.in. Generated from configure.ac by autoheader. */
++
++/* Turn debugging mode on? */
++#undef DEBUG
++
++/* Define to 1 if you have the <ctype.h> header file. */
++#undef HAVE_CTYPE_H
++
++/* Define to 1 if you have the <dlfcn.h> header file. */
++#undef HAVE_DLFCN_H
++
++/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */
++#undef HAVE_FSEEKO
++
++/* Define to 1 if you have the <inttypes.h> header file. */
++#undef HAVE_INTTYPES_H
++
++/* Define to 1 if you have the <limits.h> header file. */
++#undef HAVE_LIMITS_H
++
++/* Define to 1 if you have the <memory.h> header file. */
++#undef HAVE_MEMORY_H
++
++/* Define to 1 if you have the <stdint.h> header file. */
++#undef HAVE_STDINT_H
++
++/* Define to 1 if you have the <stdlib.h> header file. */
++#undef HAVE_STDLIB_H
++
++/* Define to 1 if you have the <strings.h> header file. */
++#undef HAVE_STRINGS_H
++
++/* Define to 1 if you have the <string.h> header file. */
++#undef HAVE_STRING_H
++
++/* Define to 1 if you have the <sys/stat.h> header file. */
++#undef HAVE_SYS_STAT_H
++
++/* Define to 1 if you have the <sys/types.h> header file. */
++#undef HAVE_SYS_TYPES_H
++
++/* Define to 1 if you have the `tolower' function. */
++#undef HAVE_TOLOWER
++
++/* Define to 1 if you have the `towlower' function. */
++#undef HAVE_TOWLOWER
++
++/* Define to 1 if you have the <unistd.h> header file. */
++#undef HAVE_UNISTD_H
++
++/* Define to 1 if you have the <wctype.h> header file. */
++#undef HAVE_WCTYPE_H
++
++/* Define to the sub-directory in which libtool stores uninstalled libraries.
++ */
++#undef LT_OBJDIR
++
++/* Name of package */
++#undef PACKAGE
++
++/* Define to the address where bug reports for this package should be sent. */
++#undef PACKAGE_BUGREPORT
++
++/* Define to the full name of this package. */
++#undef PACKAGE_NAME
++
++/* Define to the full name and version of this package. */
++#undef PACKAGE_STRING
++
++/* Define to the one symbol short name of this package. */
++#undef PACKAGE_TARNAME
++
++/* Define to the home page for this package. */
++#undef PACKAGE_URL
++
++/* Define to the version of this package. */
++#undef PACKAGE_VERSION
++
++/* The size of `off_t', as computed by sizeof. */
++#undef SIZEOF_OFF_T
++
++/* Define to 1 if you have the ANSI C header files. */
++#undef STDC_HEADERS
++
++/* Version number of package */
++#undef VERSION
++
++/* Number of bits in a file offset, on hosts where this is settable. */
++#undef _FILE_OFFSET_BITS
++
++/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */
++#undef _LARGEFILE_SOURCE
++
++/* Define for large files, on AIX-style hosts. */
++#undef _LARGE_FILES
++
++/* Define to empty if `const' does not conform to ANSI C. */
++#undef const
++
++/* Define to `__inline__' or `__inline' if that's what the C compiler
++ calls it, or to nothing if 'inline' is not supported under any name. */
++#ifndef __cplusplus
++#undef inline
++#endif
++
++/* Define to `int' if <sys/types.h> does not define. */
++#undef mode_t
++
++/* Define to `long int' if <sys/types.h> does not define. */
++#undef off_t
++
++/* Define to `unsigned int' if <sys/types.h> does not define. */
++#undef size_t
+diff --git a/libclamav/libmspack-0.4alpha/config.sub b/libclamav/libmspack-0.4alpha/config.sub
+new file mode 100755
+index 000000000000..c894da45500c
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/config.sub
+@@ -0,0 +1,1773 @@
++#! /bin/sh
++# Configuration validation subroutine script.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
++# 2011, 2012 Free Software Foundation, Inc.
++
++timestamp='2012-02-10'
++
++# This file is (in principle) common to ALL GNU software.
++# The presence of a machine in this file suggests that SOME GNU software
++# can handle that machine. It does not imply ALL GNU software can.
++#
++# This file is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, see <http://www.gnu.org/licenses/>.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Please send patches to <config-patches at gnu.org>. Submit a context
++# diff and a properly formatted GNU ChangeLog entry.
++#
++# Configuration subroutine to validate and canonicalize a configuration type.
++# Supply the specified configuration type as an argument.
++# If it is invalid, we print an error message on stderr and exit with code 1.
++# Otherwise, we print the canonical config type on stdout and succeed.
++
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++# This file is supposed to be the same for all GNU packages
++# and recognize all the CPU types, system types and aliases
++# that are meaningful with *any* GNU software.
++# Each package is responsible for reporting which valid configurations
++# it does not support. The user should be able to distinguish
++# a failure to support a valid configuration from a meaningless
++# configuration.
++
++# The goal of this file is to map all the various variations of a given
++# machine specification into a single specification in the form:
++# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
++# or in some cases, the newer four-part form:
++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
++# It is wrong to echo any other type of specification.
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION] CPU-MFR-OPSYS
++ $0 [OPTION] ALIAS
++
++Canonicalize a configuration name.
++
++Operation modes:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to <config-patches at gnu.org>."
++
++version="\
++GNU config.sub ($timestamp)
++
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
++Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help"
++ exit 1 ;;
++
++ *local*)
++ # First pass through any local machine types.
++ echo $1
++ exit ;;
++
++ * )
++ break ;;
++ esac
++done
++
++case $# in
++ 0) echo "$me: missing argument$help" >&2
++ exit 1;;
++ 1) ;;
++ *) echo "$me: too many arguments$help" >&2
++ exit 1;;
++esac
++
++# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
++# Here we must recognize all the valid KERNEL-OS combinations.
++maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
++case $maybe_os in
++ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
++ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
++ knetbsd*-gnu* | netbsd*-gnu* | \
++ kopensolaris*-gnu* | \
++ storm-chaos* | os2-emx* | rtmk-nova*)
++ os=-$maybe_os
++ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
++ ;;
++ android-linux)
++ os=-linux-android
++ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
++ ;;
++ *)
++ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
++ if [ $basic_machine != $1 ]
++ then os=`echo $1 | sed 's/.*-/-/'`
++ else os=; fi
++ ;;
++esac
++
++### Let's recognize common machines as not being operating systems so
++### that things like config.sub decstation-3100 work. We also
++### recognize some manufacturers as not being operating systems, so we
++### can provide default operating systems below.
++case $os in
++ -sun*os*)
++ # Prevent following clause from handling this invalid input.
++ ;;
++ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
++ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
++ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
++ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
++ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
++ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
++ -apple | -axis | -knuth | -cray | -microblaze)
++ os=
++ basic_machine=$1
++ ;;
++ -bluegene*)
++ os=-cnk
++ ;;
++ -sim | -cisco | -oki | -wec | -winbond)
++ os=
++ basic_machine=$1
++ ;;
++ -scout)
++ ;;
++ -wrs)
++ os=-vxworks
++ basic_machine=$1
++ ;;
++ -chorusos*)
++ os=-chorusos
++ basic_machine=$1
++ ;;
++ -chorusrdb)
++ os=-chorusrdb
++ basic_machine=$1
++ ;;
++ -hiux*)
++ os=-hiuxwe2
++ ;;
++ -sco6)
++ os=-sco5v6
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco5)
++ os=-sco3.2v5
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco4)
++ os=-sco3.2v4
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco3.2.[4-9]*)
++ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco3.2v[4-9]*)
++ # Don't forget version if it is 3.2v4 or newer.
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco5v6*)
++ # Don't forget version if it is 3.2v4 or newer.
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco*)
++ os=-sco3.2v2
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -udk*)
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -isc)
++ os=-isc2.2
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -clix*)
++ basic_machine=clipper-intergraph
++ ;;
++ -isc*)
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -lynx*)
++ os=-lynxos
++ ;;
++ -ptx*)
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
++ ;;
++ -windowsnt*)
++ os=`echo $os | sed -e 's/windowsnt/winnt/'`
++ ;;
++ -psos*)
++ os=-psos
++ ;;
++ -mint | -mint[0-9]*)
++ basic_machine=m68k-atari
++ os=-mint
++ ;;
++esac
++
++# Decode aliases for certain CPU-COMPANY combinations.
++case $basic_machine in
++ # Recognize the basic CPU types without company name.
++ # Some are omitted here because they have special meanings below.
++ 1750a | 580 \
++ | a29k \
++ | aarch64 | aarch64_be \
++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++ | am33_2.0 \
++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
++ | be32 | be64 \
++ | bfin \
++ | c4x | clipper \
++ | d10v | d30v | dlx | dsp16xx \
++ | epiphany \
++ | fido | fr30 | frv \
++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++ | hexagon \
++ | i370 | i860 | i960 | ia64 \
++ | ip2k | iq2000 \
++ | le32 | le64 \
++ | lm32 \
++ | m32c | m32r | m32rle | m68000 | m68k | m88k \
++ | maxq | mb | microblaze | mcore | mep | metag \
++ | mips | mipsbe | mipseb | mipsel | mipsle \
++ | mips16 \
++ | mips64 | mips64el \
++ | mips64octeon | mips64octeonel \
++ | mips64orion | mips64orionel \
++ | mips64r5900 | mips64r5900el \
++ | mips64vr | mips64vrel \
++ | mips64vr4100 | mips64vr4100el \
++ | mips64vr4300 | mips64vr4300el \
++ | mips64vr5000 | mips64vr5000el \
++ | mips64vr5900 | mips64vr5900el \
++ | mipsisa32 | mipsisa32el \
++ | mipsisa32r2 | mipsisa32r2el \
++ | mipsisa64 | mipsisa64el \
++ | mipsisa64r2 | mipsisa64r2el \
++ | mipsisa64sb1 | mipsisa64sb1el \
++ | mipsisa64sr71k | mipsisa64sr71kel \
++ | mipstx39 | mipstx39el \
++ | mn10200 | mn10300 \
++ | moxie \
++ | mt \
++ | msp430 \
++ | nds32 | nds32le | nds32be \
++ | nios | nios2 \
++ | ns16k | ns32k \
++ | open8 \
++ | or32 \
++ | pdp10 | pdp11 | pj | pjl \
++ | powerpc | powerpc64 | powerpc64le | powerpcle \
++ | pyramid \
++ | rl78 | rx \
++ | score \
++ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
++ | sh64 | sh64le \
++ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
++ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
++ | spu \
++ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
++ | ubicom32 \
++ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
++ | we32k \
++ | x86 | xc16x | xstormy16 | xtensa \
++ | z8k | z80)
++ basic_machine=$basic_machine-unknown
++ ;;
++ c54x)
++ basic_machine=tic54x-unknown
++ ;;
++ c55x)
++ basic_machine=tic55x-unknown
++ ;;
++ c6x)
++ basic_machine=tic6x-unknown
++ ;;
++ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
++ basic_machine=$basic_machine-unknown
++ os=-none
++ ;;
++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
++ ;;
++ ms1)
++ basic_machine=mt-unknown
++ ;;
++
++ strongarm | thumb | xscale)
++ basic_machine=arm-unknown
++ ;;
++ xgate)
++ basic_machine=$basic_machine-unknown
++ os=-none
++ ;;
++ xscaleeb)
++ basic_machine=armeb-unknown
++ ;;
++
++ xscaleel)
++ basic_machine=armel-unknown
++ ;;
++
++ # We use `pc' rather than `unknown'
++ # because (1) that's what they normally are, and
++ # (2) the word "unknown" tends to confuse beginning users.
++ i*86 | x86_64)
++ basic_machine=$basic_machine-pc
++ ;;
++ # Object if more than one company name word.
++ *-*-*)
++ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++ exit 1
++ ;;
++ # Recognize the basic CPU types with company name.
++ 580-* \
++ | a29k-* \
++ | aarch64-* | aarch64_be-* \
++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
++ | avr-* | avr32-* \
++ | be32-* | be64-* \
++ | bfin-* | bs2000-* \
++ | c[123]* | c30-* | [cjt]90-* | c4x-* \
++ | clipper-* | craynv-* | cydra-* \
++ | d10v-* | d30v-* | dlx-* \
++ | elxsi-* \
++ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
++ | h8300-* | h8500-* \
++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++ | hexagon-* \
++ | i*86-* | i860-* | i960-* | ia64-* \
++ | ip2k-* | iq2000-* \
++ | le32-* | le64-* \
++ | lm32-* \
++ | m32c-* | m32r-* | m32rle-* \
++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++ | mips16-* \
++ | mips64-* | mips64el-* \
++ | mips64octeon-* | mips64octeonel-* \
++ | mips64orion-* | mips64orionel-* \
++ | mips64r5900-* | mips64r5900el-* \
++ | mips64vr-* | mips64vrel-* \
++ | mips64vr4100-* | mips64vr4100el-* \
++ | mips64vr4300-* | mips64vr4300el-* \
++ | mips64vr5000-* | mips64vr5000el-* \
++ | mips64vr5900-* | mips64vr5900el-* \
++ | mipsisa32-* | mipsisa32el-* \
++ | mipsisa32r2-* | mipsisa32r2el-* \
++ | mipsisa64-* | mipsisa64el-* \
++ | mipsisa64r2-* | mipsisa64r2el-* \
++ | mipsisa64sb1-* | mipsisa64sb1el-* \
++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
++ | mipstx39-* | mipstx39el-* \
++ | mmix-* \
++ | mt-* \
++ | msp430-* \
++ | nds32-* | nds32le-* | nds32be-* \
++ | nios-* | nios2-* \
++ | none-* | np1-* | ns16k-* | ns32k-* \
++ | open8-* \
++ | orion-* \
++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
++ | pyramid-* \
++ | rl78-* | romp-* | rs6000-* | rx-* \
++ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
++ | sparclite-* \
++ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
++ | tahoe-* \
++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++ | tile*-* \
++ | tron-* \
++ | ubicom32-* \
++ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
++ | vax-* \
++ | we32k-* \
++ | x86-* | x86_64-* | xc16x-* | xps100-* \
++ | xstormy16-* | xtensa*-* \
++ | ymp-* \
++ | z8k-* | z80-*)
++ ;;
++ # Recognize the basic CPU types without company name, with glob match.
++ xtensa*)
++ basic_machine=$basic_machine-unknown
++ ;;
++ # Recognize the various machine names and aliases which stand
++ # for a CPU type and a company and sometimes even an OS.
++ 386bsd)
++ basic_machine=i386-unknown
++ os=-bsd
++ ;;
++ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
++ basic_machine=m68000-att
++ ;;
++ 3b*)
++ basic_machine=we32k-att
++ ;;
++ a29khif)
++ basic_machine=a29k-amd
++ os=-udi
++ ;;
++ abacus)
++ basic_machine=abacus-unknown
++ ;;
++ adobe68k)
++ basic_machine=m68010-adobe
++ os=-scout
++ ;;
++ alliant | fx80)
++ basic_machine=fx80-alliant
++ ;;
++ altos | altos3068)
++ basic_machine=m68k-altos
++ ;;
++ am29k)
++ basic_machine=a29k-none
++ os=-bsd
++ ;;
++ amd64)
++ basic_machine=x86_64-pc
++ ;;
++ amd64-*)
++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ amdahl)
++ basic_machine=580-amdahl
++ os=-sysv
++ ;;
++ amiga | amiga-*)
++ basic_machine=m68k-unknown
++ ;;
++ amigaos | amigados)
++ basic_machine=m68k-unknown
++ os=-amigaos
++ ;;
++ amigaunix | amix)
++ basic_machine=m68k-unknown
++ os=-sysv4
++ ;;
++ apollo68)
++ basic_machine=m68k-apollo
++ os=-sysv
++ ;;
++ apollo68bsd)
++ basic_machine=m68k-apollo
++ os=-bsd
++ ;;
++ aros)
++ basic_machine=i386-pc
++ os=-aros
++ ;;
++ aux)
++ basic_machine=m68k-apple
++ os=-aux
++ ;;
++ balance)
++ basic_machine=ns32k-sequent
++ os=-dynix
++ ;;
++ blackfin)
++ basic_machine=bfin-unknown
++ os=-linux
++ ;;
++ blackfin-*)
++ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ bluegene*)
++ basic_machine=powerpc-ibm
++ os=-cnk
++ ;;
++ c54x-*)
++ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ c55x-*)
++ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ c6x-*)
++ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ c90)
++ basic_machine=c90-cray
++ os=-unicos
++ ;;
++ cegcc)
++ basic_machine=arm-unknown
++ os=-cegcc
++ ;;
++ convex-c1)
++ basic_machine=c1-convex
++ os=-bsd
++ ;;
++ convex-c2)
++ basic_machine=c2-convex
++ os=-bsd
++ ;;
++ convex-c32)
++ basic_machine=c32-convex
++ os=-bsd
++ ;;
++ convex-c34)
++ basic_machine=c34-convex
++ os=-bsd
++ ;;
++ convex-c38)
++ basic_machine=c38-convex
++ os=-bsd
++ ;;
++ cray | j90)
++ basic_machine=j90-cray
++ os=-unicos
++ ;;
++ craynv)
++ basic_machine=craynv-cray
++ os=-unicosmp
++ ;;
++ cr16 | cr16-*)
++ basic_machine=cr16-unknown
++ os=-elf
++ ;;
++ crds | unos)
++ basic_machine=m68k-crds
++ ;;
++ crisv32 | crisv32-* | etraxfs*)
++ basic_machine=crisv32-axis
++ ;;
++ cris | cris-* | etrax*)
++ basic_machine=cris-axis
++ ;;
++ crx)
++ basic_machine=crx-unknown
++ os=-elf
++ ;;
++ da30 | da30-*)
++ basic_machine=m68k-da30
++ ;;
++ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
++ basic_machine=mips-dec
++ ;;
++ decsystem10* | dec10*)
++ basic_machine=pdp10-dec
++ os=-tops10
++ ;;
++ decsystem20* | dec20*)
++ basic_machine=pdp10-dec
++ os=-tops20
++ ;;
++ delta | 3300 | motorola-3300 | motorola-delta \
++ | 3300-motorola | delta-motorola)
++ basic_machine=m68k-motorola
++ ;;
++ delta88)
++ basic_machine=m88k-motorola
++ os=-sysv3
++ ;;
++ dicos)
++ basic_machine=i686-pc
++ os=-dicos
++ ;;
++ djgpp)
++ basic_machine=i586-pc
++ os=-msdosdjgpp
++ ;;
++ dpx20 | dpx20-*)
++ basic_machine=rs6000-bull
++ os=-bosx
++ ;;
++ dpx2* | dpx2*-bull)
++ basic_machine=m68k-bull
++ os=-sysv3
++ ;;
++ ebmon29k)
++ basic_machine=a29k-amd
++ os=-ebmon
++ ;;
++ elxsi)
++ basic_machine=elxsi-elxsi
++ os=-bsd
++ ;;
++ encore | umax | mmax)
++ basic_machine=ns32k-encore
++ ;;
++ es1800 | OSE68k | ose68k | ose | OSE)
++ basic_machine=m68k-ericsson
++ os=-ose
++ ;;
++ fx2800)
++ basic_machine=i860-alliant
++ ;;
++ genix)
++ basic_machine=ns32k-ns
++ ;;
++ gmicro)
++ basic_machine=tron-gmicro
++ os=-sysv
++ ;;
++ go32)
++ basic_machine=i386-pc
++ os=-go32
++ ;;
++ h3050r* | hiux*)
++ basic_machine=hppa1.1-hitachi
++ os=-hiuxwe2
++ ;;
++ h8300hms)
++ basic_machine=h8300-hitachi
++ os=-hms
++ ;;
++ h8300xray)
++ basic_machine=h8300-hitachi
++ os=-xray
++ ;;
++ h8500hms)
++ basic_machine=h8500-hitachi
++ os=-hms
++ ;;
++ harris)
++ basic_machine=m88k-harris
++ os=-sysv3
++ ;;
++ hp300-*)
++ basic_machine=m68k-hp
++ ;;
++ hp300bsd)
++ basic_machine=m68k-hp
++ os=-bsd
++ ;;
++ hp300hpux)
++ basic_machine=m68k-hp
++ os=-hpux
++ ;;
++ hp3k9[0-9][0-9] | hp9[0-9][0-9])
++ basic_machine=hppa1.0-hp
++ ;;
++ hp9k2[0-9][0-9] | hp9k31[0-9])
++ basic_machine=m68000-hp
++ ;;
++ hp9k3[2-9][0-9])
++ basic_machine=m68k-hp
++ ;;
++ hp9k6[0-9][0-9] | hp6[0-9][0-9])
++ basic_machine=hppa1.0-hp
++ ;;
++ hp9k7[0-79][0-9] | hp7[0-79][0-9])
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k78[0-9] | hp78[0-9])
++ # FIXME: really hppa2.0-hp
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
++ # FIXME: really hppa2.0-hp
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k8[0-9][13679] | hp8[0-9][13679])
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k8[0-9][0-9] | hp8[0-9][0-9])
++ basic_machine=hppa1.0-hp
++ ;;
++ hppa-next)
++ os=-nextstep3
++ ;;
++ hppaosf)
++ basic_machine=hppa1.1-hp
++ os=-osf
++ ;;
++ hppro)
++ basic_machine=hppa1.1-hp
++ os=-proelf
++ ;;
++ i370-ibm* | ibm*)
++ basic_machine=i370-ibm
++ ;;
++ i*86v32)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-sysv32
++ ;;
++ i*86v4*)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-sysv4
++ ;;
++ i*86v)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-sysv
++ ;;
++ i*86sol2)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-solaris2
++ ;;
++ i386mach)
++ basic_machine=i386-mach
++ os=-mach
++ ;;
++ i386-vsta | vsta)
++ basic_machine=i386-unknown
++ os=-vsta
++ ;;
++ iris | iris4d)
++ basic_machine=mips-sgi
++ case $os in
++ -irix*)
++ ;;
++ *)
++ os=-irix4
++ ;;
++ esac
++ ;;
++ isi68 | isi)
++ basic_machine=m68k-isi
++ os=-sysv
++ ;;
++ m68knommu)
++ basic_machine=m68k-unknown
++ os=-linux
++ ;;
++ m68knommu-*)
++ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ m88k-omron*)
++ basic_machine=m88k-omron
++ ;;
++ magnum | m3230)
++ basic_machine=mips-mips
++ os=-sysv
++ ;;
++ merlin)
++ basic_machine=ns32k-utek
++ os=-sysv
++ ;;
++ microblaze)
++ basic_machine=microblaze-xilinx
++ ;;
++ mingw32)
++ basic_machine=i386-pc
++ os=-mingw32
++ ;;
++ mingw32ce)
++ basic_machine=arm-unknown
++ os=-mingw32ce
++ ;;
++ miniframe)
++ basic_machine=m68000-convergent
++ ;;
++ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
++ basic_machine=m68k-atari
++ os=-mint
++ ;;
++ mips3*-*)
++ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
++ ;;
++ mips3*)
++ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
++ ;;
++ monitor)
++ basic_machine=m68k-rom68k
++ os=-coff
++ ;;
++ morphos)
++ basic_machine=powerpc-unknown
++ os=-morphos
++ ;;
++ msdos)
++ basic_machine=i386-pc
++ os=-msdos
++ ;;
++ ms1-*)
++ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
++ ;;
++ msys)
++ basic_machine=i386-pc
++ os=-msys
++ ;;
++ mvs)
++ basic_machine=i370-ibm
++ os=-mvs
++ ;;
++ nacl)
++ basic_machine=le32-unknown
++ os=-nacl
++ ;;
++ ncr3000)
++ basic_machine=i486-ncr
++ os=-sysv4
++ ;;
++ netbsd386)
++ basic_machine=i386-unknown
++ os=-netbsd
++ ;;
++ netwinder)
++ basic_machine=armv4l-rebel
++ os=-linux
++ ;;
++ news | news700 | news800 | news900)
++ basic_machine=m68k-sony
++ os=-newsos
++ ;;
++ news1000)
++ basic_machine=m68030-sony
++ os=-newsos
++ ;;
++ news-3600 | risc-news)
++ basic_machine=mips-sony
++ os=-newsos
++ ;;
++ necv70)
++ basic_machine=v70-nec
++ os=-sysv
++ ;;
++ next | m*-next )
++ basic_machine=m68k-next
++ case $os in
++ -nextstep* )
++ ;;
++ -ns2*)
++ os=-nextstep2
++ ;;
++ *)
++ os=-nextstep3
++ ;;
++ esac
++ ;;
++ nh3000)
++ basic_machine=m68k-harris
++ os=-cxux
++ ;;
++ nh[45]000)
++ basic_machine=m88k-harris
++ os=-cxux
++ ;;
++ nindy960)
++ basic_machine=i960-intel
++ os=-nindy
++ ;;
++ mon960)
++ basic_machine=i960-intel
++ os=-mon960
++ ;;
++ nonstopux)
++ basic_machine=mips-compaq
++ os=-nonstopux
++ ;;
++ np1)
++ basic_machine=np1-gould
++ ;;
++ neo-tandem)
++ basic_machine=neo-tandem
++ ;;
++ nse-tandem)
++ basic_machine=nse-tandem
++ ;;
++ nsr-tandem)
++ basic_machine=nsr-tandem
++ ;;
++ op50n-* | op60c-*)
++ basic_machine=hppa1.1-oki
++ os=-proelf
++ ;;
++ openrisc | openrisc-*)
++ basic_machine=or32-unknown
++ ;;
++ os400)
++ basic_machine=powerpc-ibm
++ os=-os400
++ ;;
++ OSE68000 | ose68000)
++ basic_machine=m68000-ericsson
++ os=-ose
++ ;;
++ os68k)
++ basic_machine=m68k-none
++ os=-os68k
++ ;;
++ pa-hitachi)
++ basic_machine=hppa1.1-hitachi
++ os=-hiuxwe2
++ ;;
++ paragon)
++ basic_machine=i860-intel
++ os=-osf
++ ;;
++ parisc)
++ basic_machine=hppa-unknown
++ os=-linux
++ ;;
++ parisc-*)
++ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ pbd)
++ basic_machine=sparc-tti
++ ;;
++ pbb)
++ basic_machine=m68k-tti
++ ;;
++ pc532 | pc532-*)
++ basic_machine=ns32k-pc532
++ ;;
++ pc98)
++ basic_machine=i386-pc
++ ;;
++ pc98-*)
++ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentium | p5 | k5 | k6 | nexgen | viac3)
++ basic_machine=i586-pc
++ ;;
++ pentiumpro | p6 | 6x86 | athlon | athlon_*)
++ basic_machine=i686-pc
++ ;;
++ pentiumii | pentium2 | pentiumiii | pentium3)
++ basic_machine=i686-pc
++ ;;
++ pentium4)
++ basic_machine=i786-pc
++ ;;
++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
++ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentiumpro-* | p6-* | 6x86-* | athlon-*)
++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentium4-*)
++ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pn)
++ basic_machine=pn-gould
++ ;;
++ power) basic_machine=power-ibm
++ ;;
++ ppc | ppcbe) basic_machine=powerpc-unknown
++ ;;
++ ppc-* | ppcbe-*)
++ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppcle | powerpclittle | ppc-le | powerpc-little)
++ basic_machine=powerpcle-unknown
++ ;;
++ ppcle-* | powerpclittle-*)
++ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppc64) basic_machine=powerpc64-unknown
++ ;;
++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++ basic_machine=powerpc64le-unknown
++ ;;
++ ppc64le-* | powerpc64little-*)
++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ps2)
++ basic_machine=i386-ibm
++ ;;
++ pw32)
++ basic_machine=i586-unknown
++ os=-pw32
++ ;;
++ rdos)
++ basic_machine=i386-pc
++ os=-rdos
++ ;;
++ rom68k)
++ basic_machine=m68k-rom68k
++ os=-coff
++ ;;
++ rm[46]00)
++ basic_machine=mips-siemens
++ ;;
++ rtpc | rtpc-*)
++ basic_machine=romp-ibm
++ ;;
++ s390 | s390-*)
++ basic_machine=s390-ibm
++ ;;
++ s390x | s390x-*)
++ basic_machine=s390x-ibm
++ ;;
++ sa29200)
++ basic_machine=a29k-amd
++ os=-udi
++ ;;
++ sb1)
++ basic_machine=mipsisa64sb1-unknown
++ ;;
++ sb1el)
++ basic_machine=mipsisa64sb1el-unknown
++ ;;
++ sde)
++ basic_machine=mipsisa32-sde
++ os=-elf
++ ;;
++ sei)
++ basic_machine=mips-sei
++ os=-seiux
++ ;;
++ sequent)
++ basic_machine=i386-sequent
++ ;;
++ sh)
++ basic_machine=sh-hitachi
++ os=-hms
++ ;;
++ sh5el)
++ basic_machine=sh5le-unknown
++ ;;
++ sh64)
++ basic_machine=sh64-unknown
++ ;;
++ sparclite-wrs | simso-wrs)
++ basic_machine=sparclite-wrs
++ os=-vxworks
++ ;;
++ sps7)
++ basic_machine=m68k-bull
++ os=-sysv2
++ ;;
++ spur)
++ basic_machine=spur-unknown
++ ;;
++ st2000)
++ basic_machine=m68k-tandem
++ ;;
++ stratus)
++ basic_machine=i860-stratus
++ os=-sysv4
++ ;;
++ strongarm-* | thumb-*)
++ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ sun2)
++ basic_machine=m68000-sun
++ ;;
++ sun2os3)
++ basic_machine=m68000-sun
++ os=-sunos3
++ ;;
++ sun2os4)
++ basic_machine=m68000-sun
++ os=-sunos4
++ ;;
++ sun3os3)
++ basic_machine=m68k-sun
++ os=-sunos3
++ ;;
++ sun3os4)
++ basic_machine=m68k-sun
++ os=-sunos4
++ ;;
++ sun4os3)
++ basic_machine=sparc-sun
++ os=-sunos3
++ ;;
++ sun4os4)
++ basic_machine=sparc-sun
++ os=-sunos4
++ ;;
++ sun4sol2)
++ basic_machine=sparc-sun
++ os=-solaris2
++ ;;
++ sun3 | sun3-*)
++ basic_machine=m68k-sun
++ ;;
++ sun4)
++ basic_machine=sparc-sun
++ ;;
++ sun386 | sun386i | roadrunner)
++ basic_machine=i386-sun
++ ;;
++ sv1)
++ basic_machine=sv1-cray
++ os=-unicos
++ ;;
++ symmetry)
++ basic_machine=i386-sequent
++ os=-dynix
++ ;;
++ t3e)
++ basic_machine=alphaev5-cray
++ os=-unicos
++ ;;
++ t90)
++ basic_machine=t90-cray
++ os=-unicos
++ ;;
++ tile*)
++ basic_machine=$basic_machine-unknown
++ os=-linux-gnu
++ ;;
++ tx39)
++ basic_machine=mipstx39-unknown
++ ;;
++ tx39el)
++ basic_machine=mipstx39el-unknown
++ ;;
++ toad1)
++ basic_machine=pdp10-xkl
++ os=-tops20
++ ;;
++ tower | tower-32)
++ basic_machine=m68k-ncr
++ ;;
++ tpf)
++ basic_machine=s390x-ibm
++ os=-tpf
++ ;;
++ udi29k)
++ basic_machine=a29k-amd
++ os=-udi
++ ;;
++ ultra3)
++ basic_machine=a29k-nyu
++ os=-sym1
++ ;;
++ v810 | necv810)
++ basic_machine=v810-nec
++ os=-none
++ ;;
++ vaxv)
++ basic_machine=vax-dec
++ os=-sysv
++ ;;
++ vms)
++ basic_machine=vax-dec
++ os=-vms
++ ;;
++ vpp*|vx|vx-*)
++ basic_machine=f301-fujitsu
++ ;;
++ vxworks960)
++ basic_machine=i960-wrs
++ os=-vxworks
++ ;;
++ vxworks68)
++ basic_machine=m68k-wrs
++ os=-vxworks
++ ;;
++ vxworks29k)
++ basic_machine=a29k-wrs
++ os=-vxworks
++ ;;
++ w65*)
++ basic_machine=w65-wdc
++ os=-none
++ ;;
++ w89k-*)
++ basic_machine=hppa1.1-winbond
++ os=-proelf
++ ;;
++ xbox)
++ basic_machine=i686-pc
++ os=-mingw32
++ ;;
++ xps | xps100)
++ basic_machine=xps100-honeywell
++ ;;
++ xscale-* | xscalee[bl]-*)
++ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
++ ;;
++ ymp)
++ basic_machine=ymp-cray
++ os=-unicos
++ ;;
++ z8k-*-coff)
++ basic_machine=z8k-unknown
++ os=-sim
++ ;;
++ z80-*-coff)
++ basic_machine=z80-unknown
++ os=-sim
++ ;;
++ none)
++ basic_machine=none-none
++ os=-none
++ ;;
++
++# Here we handle the default manufacturer of certain CPU types. It is in
++# some cases the only manufacturer, in others, it is the most popular.
++ w89k)
++ basic_machine=hppa1.1-winbond
++ ;;
++ op50n)
++ basic_machine=hppa1.1-oki
++ ;;
++ op60c)
++ basic_machine=hppa1.1-oki
++ ;;
++ romp)
++ basic_machine=romp-ibm
++ ;;
++ mmix)
++ basic_machine=mmix-knuth
++ ;;
++ rs6000)
++ basic_machine=rs6000-ibm
++ ;;
++ vax)
++ basic_machine=vax-dec
++ ;;
++ pdp10)
++ # there are many clones, so DEC is not a safe bet
++ basic_machine=pdp10-unknown
++ ;;
++ pdp11)
++ basic_machine=pdp11-dec
++ ;;
++ we32k)
++ basic_machine=we32k-att
++ ;;
++ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
++ basic_machine=sh-unknown
++ ;;
++ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
++ basic_machine=sparc-sun
++ ;;
++ cydra)
++ basic_machine=cydra-cydrome
++ ;;
++ orion)
++ basic_machine=orion-highlevel
++ ;;
++ orion105)
++ basic_machine=clipper-highlevel
++ ;;
++ mac | mpw | mac-mpw)
++ basic_machine=m68k-apple
++ ;;
++ pmac | pmac-mpw)
++ basic_machine=powerpc-apple
++ ;;
++ *-unknown)
++ # Make sure to match an already-canonicalized machine name.
++ ;;
++ *)
++ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++ exit 1
++ ;;
++esac
++
++# Here we canonicalize certain aliases for manufacturers.
++case $basic_machine in
++ *-digital*)
++ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
++ ;;
++ *-commodore*)
++ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
++ ;;
++ *)
++ ;;
++esac
++
++# Decode manufacturer-specific aliases for certain operating systems.
++
++if [ x"$os" != x"" ]
++then
++case $os in
++ # First match some system type aliases
++ # that might get confused with valid system types.
++ # -solaris* is a basic system type, with this one exception.
++ -auroraux)
++ os=-auroraux
++ ;;
++ -solaris1 | -solaris1.*)
++ os=`echo $os | sed -e 's|solaris1|sunos4|'`
++ ;;
++ -solaris)
++ os=-solaris2
++ ;;
++ -svr4*)
++ os=-sysv4
++ ;;
++ -unixware*)
++ os=-sysv4.2uw
++ ;;
++ -gnu/linux*)
++ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
++ ;;
++ # First accept the basic system types.
++ # The portable systems comes first.
++ # Each alternative MUST END IN A *, to match a version number.
++ # -sysv* is not here because it comes later, after sysvr4.
++ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
++ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
++ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
++ | -sym* | -kopensolaris* \
++ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
++ | -aos* | -aros* \
++ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
++ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
++ | -openbsd* | -solidbsd* \
++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
++ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++ | -chorusos* | -chorusrdb* | -cegcc* \
++ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
++ | -mingw32* | -linux-gnu* | -linux-android* \
++ | -linux-newlib* | -linux-uclibc* \
++ | -uxpv* | -beos* | -mpeix* | -udk* \
++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
++ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
++ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
++ # Remember, each alternative MUST END IN *, to match a version number.
++ ;;
++ -qnx*)
++ case $basic_machine in
++ x86-* | i*86-*)
++ ;;
++ *)
++ os=-nto$os
++ ;;
++ esac
++ ;;
++ -nto-qnx*)
++ ;;
++ -nto*)
++ os=`echo $os | sed -e 's|nto|nto-qnx|'`
++ ;;
++ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
++ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
++ ;;
++ -mac*)
++ os=`echo $os | sed -e 's|mac|macos|'`
++ ;;
++ -linux-dietlibc)
++ os=-linux-dietlibc
++ ;;
++ -linux*)
++ os=`echo $os | sed -e 's|linux|linux-gnu|'`
++ ;;
++ -sunos5*)
++ os=`echo $os | sed -e 's|sunos5|solaris2|'`
++ ;;
++ -sunos6*)
++ os=`echo $os | sed -e 's|sunos6|solaris3|'`
++ ;;
++ -opened*)
++ os=-openedition
++ ;;
++ -os400*)
++ os=-os400
++ ;;
++ -wince*)
++ os=-wince
++ ;;
++ -osfrose*)
++ os=-osfrose
++ ;;
++ -osf*)
++ os=-osf
++ ;;
++ -utek*)
++ os=-bsd
++ ;;
++ -dynix*)
++ os=-bsd
++ ;;
++ -acis*)
++ os=-aos
++ ;;
++ -atheos*)
++ os=-atheos
++ ;;
++ -syllable*)
++ os=-syllable
++ ;;
++ -386bsd)
++ os=-bsd
++ ;;
++ -ctix* | -uts*)
++ os=-sysv
++ ;;
++ -nova*)
++ os=-rtmk-nova
++ ;;
++ -ns2 )
++ os=-nextstep2
++ ;;
++ -nsk*)
++ os=-nsk
++ ;;
++ # Preserve the version number of sinix5.
++ -sinix5.*)
++ os=`echo $os | sed -e 's|sinix|sysv|'`
++ ;;
++ -sinix*)
++ os=-sysv4
++ ;;
++ -tpf*)
++ os=-tpf
++ ;;
++ -triton*)
++ os=-sysv3
++ ;;
++ -oss*)
++ os=-sysv3
++ ;;
++ -svr4)
++ os=-sysv4
++ ;;
++ -svr3)
++ os=-sysv3
++ ;;
++ -sysvr4)
++ os=-sysv4
++ ;;
++ # This must come after -sysvr4.
++ -sysv*)
++ ;;
++ -ose*)
++ os=-ose
++ ;;
++ -es1800*)
++ os=-ose
++ ;;
++ -xenix)
++ os=-xenix
++ ;;
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ os=-mint
++ ;;
++ -aros*)
++ os=-aros
++ ;;
++ -kaos*)
++ os=-kaos
++ ;;
++ -zvmoe)
++ os=-zvmoe
++ ;;
++ -dicos*)
++ os=-dicos
++ ;;
++ -nacl*)
++ ;;
++ -none)
++ ;;
++ *)
++ # Get rid of the `-' at the beginning of $os.
++ os=`echo $os | sed 's/[^-]*-//'`
++ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
++ exit 1
++ ;;
++esac
++else
++
++# Here we handle the default operating systems that come with various machines.
++# The value should be what the vendor currently ships out the door with their
++# machine or put another way, the most popular os provided with the machine.
++
++# Note that if you're going to try to match "-MANUFACTURER" here (say,
++# "-sun"), then you have to tell the case statement up towards the top
++# that MANUFACTURER isn't an operating system. Otherwise, code above
++# will signal an error saying that MANUFACTURER isn't an operating
++# system, and we'll never get to this point.
++
++case $basic_machine in
++ score-*)
++ os=-elf
++ ;;
++ spu-*)
++ os=-elf
++ ;;
++ *-acorn)
++ os=-riscix1.2
++ ;;
++ arm*-rebel)
++ os=-linux
++ ;;
++ arm*-semi)
++ os=-aout
++ ;;
++ c4x-* | tic4x-*)
++ os=-coff
++ ;;
++ tic54x-*)
++ os=-coff
++ ;;
++ tic55x-*)
++ os=-coff
++ ;;
++ tic6x-*)
++ os=-coff
++ ;;
++ # This must come before the *-dec entry.
++ pdp10-*)
++ os=-tops20
++ ;;
++ pdp11-*)
++ os=-none
++ ;;
++ *-dec | vax-*)
++ os=-ultrix4.2
++ ;;
++ m68*-apollo)
++ os=-domain
++ ;;
++ i386-sun)
++ os=-sunos4.0.2
++ ;;
++ m68000-sun)
++ os=-sunos3
++ ;;
++ m68*-cisco)
++ os=-aout
++ ;;
++ mep-*)
++ os=-elf
++ ;;
++ mips*-cisco)
++ os=-elf
++ ;;
++ mips*-*)
++ os=-elf
++ ;;
++ or32-*)
++ os=-coff
++ ;;
++ *-tti) # must be before sparc entry or we get the wrong os.
++ os=-sysv3
++ ;;
++ sparc-* | *-sun)
++ os=-sunos4.1.1
++ ;;
++ *-be)
++ os=-beos
++ ;;
++ *-haiku)
++ os=-haiku
++ ;;
++ *-ibm)
++ os=-aix
++ ;;
++ *-knuth)
++ os=-mmixware
++ ;;
++ *-wec)
++ os=-proelf
++ ;;
++ *-winbond)
++ os=-proelf
++ ;;
++ *-oki)
++ os=-proelf
++ ;;
++ *-hp)
++ os=-hpux
++ ;;
++ *-hitachi)
++ os=-hiux
++ ;;
++ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
++ os=-sysv
++ ;;
++ *-cbm)
++ os=-amigaos
++ ;;
++ *-dg)
++ os=-dgux
++ ;;
++ *-dolphin)
++ os=-sysv3
++ ;;
++ m68k-ccur)
++ os=-rtu
++ ;;
++ m88k-omron*)
++ os=-luna
++ ;;
++ *-next )
++ os=-nextstep
++ ;;
++ *-sequent)
++ os=-ptx
++ ;;
++ *-crds)
++ os=-unos
++ ;;
++ *-ns)
++ os=-genix
++ ;;
++ i370-*)
++ os=-mvs
++ ;;
++ *-next)
++ os=-nextstep3
++ ;;
++ *-gould)
++ os=-sysv
++ ;;
++ *-highlevel)
++ os=-bsd
++ ;;
++ *-encore)
++ os=-bsd
++ ;;
++ *-sgi)
++ os=-irix
++ ;;
++ *-siemens)
++ os=-sysv4
++ ;;
++ *-masscomp)
++ os=-rtu
++ ;;
++ f30[01]-fujitsu | f700-fujitsu)
++ os=-uxpv
++ ;;
++ *-rom68k)
++ os=-coff
++ ;;
++ *-*bug)
++ os=-coff
++ ;;
++ *-apple)
++ os=-macos
++ ;;
++ *-atari*)
++ os=-mint
++ ;;
++ *)
++ os=-none
++ ;;
++esac
++fi
++
++# Here we handle the case where we know the os, and the CPU type, but not the
++# manufacturer. We pick the logical manufacturer.
++vendor=unknown
++case $basic_machine in
++ *-unknown)
++ case $os in
++ -riscix*)
++ vendor=acorn
++ ;;
++ -sunos*)
++ vendor=sun
++ ;;
++ -cnk*|-aix*)
++ vendor=ibm
++ ;;
++ -beos*)
++ vendor=be
++ ;;
++ -hpux*)
++ vendor=hp
++ ;;
++ -mpeix*)
++ vendor=hp
++ ;;
++ -hiux*)
++ vendor=hitachi
++ ;;
++ -unos*)
++ vendor=crds
++ ;;
++ -dgux*)
++ vendor=dg
++ ;;
++ -luna*)
++ vendor=omron
++ ;;
++ -genix*)
++ vendor=ns
++ ;;
++ -mvs* | -opened*)
++ vendor=ibm
++ ;;
++ -os400*)
++ vendor=ibm
++ ;;
++ -ptx*)
++ vendor=sequent
++ ;;
++ -tpf*)
++ vendor=ibm
++ ;;
++ -vxsim* | -vxworks* | -windiss*)
++ vendor=wrs
++ ;;
++ -aux*)
++ vendor=apple
++ ;;
++ -hms*)
++ vendor=hitachi
++ ;;
++ -mpw* | -macos*)
++ vendor=apple
++ ;;
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ vendor=atari
++ ;;
++ -vos*)
++ vendor=stratus
++ ;;
++ esac
++ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
++ ;;
++esac
++
++echo $basic_machine$os
++exit
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+diff --git a/libclamav/libmspack-0.4alpha/configure b/libclamav/libmspack-0.4alpha/configure
+new file mode 100755
+index 000000000000..5f03b36c49ac
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/configure
+@@ -0,0 +1,14567 @@
++#! /bin/sh
++# Guess values for system-dependent variables and create Makefiles.
++# Generated by GNU Autoconf 2.68 for libmspack 0.4alpha.
++#
++# Report bugs to <kyzer at 4u.net>.
++#
++#
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
++# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
++# Foundation, Inc.
++#
++#
++# This configure script is free software; the Free Software Foundation
++# gives unlimited permission to copy, distribute and modify it.
++## -------------------- ##
++## M4sh Initialization. ##
++## -------------------- ##
++
++# Be more Bourne compatible
++DUALCASE=1; export DUALCASE # for MKS sh
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
++fi
++
++
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++# Prefer a ksh shell builtin over an external printf program on Solaris,
++# but without wasting forks for bash or zsh.
++if test -z "$BASH_VERSION$ZSH_VERSION" \
++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='print -r --'
++ as_echo_n='print -rn --'
++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='printf %s\n'
++ as_echo_n='printf %s'
++else
++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++ as_echo_n='/usr/ucb/echo -n'
++ else
++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++ as_echo_n_body='eval
++ arg=$1;
++ case $arg in #(
++ *"$as_nl"*)
++ expr "X$arg" : "X\\(.*\\)$as_nl";
++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++ esac;
++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++ '
++ export as_echo_n_body
++ as_echo_n='sh -c $as_echo_n_body as_echo'
++ fi
++ export as_echo_body
++ as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
++fi
++
++
++# IFS
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent editors from complaining about space-tab.
++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
++# splitting by setting IFS to empty value.)
++IFS=" "" $as_nl"
++
++# Find who we are. Look in the path if we contain no directory separator.
++as_myself=
++case $0 in #((
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++ done
++IFS=$as_save_IFS
++
++ ;;
++esac
++# We did not find ourselves, most probably we were run as `sh COMMAND'
++# in which case we are not to be found in the path.
++if test "x$as_myself" = x; then
++ as_myself=$0
++fi
++if test ! -f "$as_myself"; then
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ exit 1
++fi
++
++# Unset variables that we do not need and which cause bugs (e.g. in
++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
++# suppresses any "Segmentation fault" message there. '((' could
++# trigger a bug in pdksh 5.2.14.
++for as_var in BASH_ENV ENV MAIL MAILPATH
++do eval test x\${$as_var+set} = xset \
++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
++done
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
++
++# CDPATH.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++if test "x$CONFIG_SHELL" = x; then
++ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '\${1+\"\$@\"}'='\"\$@\"'
++ setopt NO_GLOB_SUBST
++else
++ case \`(set -o) 2>/dev/null\` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
++fi
++"
++ as_required="as_fn_return () { (exit \$1); }
++as_fn_success () { as_fn_return 0; }
++as_fn_failure () { as_fn_return 1; }
++as_fn_ret_success () { return 0; }
++as_fn_ret_failure () { return 1; }
++
++exitcode=0
++as_fn_success || { exitcode=1; echo as_fn_success failed.; }
++as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
++as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
++as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
++if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
++
++else
++ exitcode=1; echo positional parameters were not saved.
++fi
++test x\$exitcode = x0 || exit 1"
++ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
++ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
++ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
++ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
++
++ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
++ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
++ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
++ PATH=/empty FPATH=/empty; export PATH FPATH
++ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
++ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
++test \$(( 1 + 1 )) = 2 || exit 1"
++ if (eval "$as_required") 2>/dev/null; then :
++ as_have_required=yes
++else
++ as_have_required=no
++fi
++ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
++
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++as_found=false
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ as_found=:
++ case $as_dir in #(
++ /*)
++ for as_base in sh bash ksh sh5; do
++ # Try only shells that exist, to save several forks.
++ as_shell=$as_dir/$as_base
++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
++ CONFIG_SHELL=$as_shell as_have_required=yes
++ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
++ break 2
++fi
++fi
++ done;;
++ esac
++ as_found=false
++done
++$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
++ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
++ CONFIG_SHELL=$SHELL as_have_required=yes
++fi; }
++IFS=$as_save_IFS
++
++
++ if test "x$CONFIG_SHELL" != x; then :
++ # We cannot yet assume a decent shell, so we have to provide a
++ # neutralization value for shells without unset; and this also
++ # works around shells that cannot unset nonexistent variables.
++ # Preserve -v and -x to the replacement shell.
++ BASH_ENV=/dev/null
++ ENV=/dev/null
++ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
++ export CONFIG_SHELL
++ case $- in # ((((
++ *v*x* | *x*v* ) as_opts=-vx ;;
++ *v* ) as_opts=-v ;;
++ *x* ) as_opts=-x ;;
++ * ) as_opts= ;;
++ esac
++ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
++fi
++
++ if test x$as_have_required = xno; then :
++ $as_echo "$0: This script requires a shell more modern than all"
++ $as_echo "$0: the shells that I found on your system."
++ if test x${ZSH_VERSION+set} = xset ; then
++ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
++ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
++ else
++ $as_echo "$0: Please tell bug-autoconf at gnu.org and kyzer at 4u.net about
++$0: your system, including any error possibly output before
++$0: this message. Then install a modern shell, or manually
++$0: run the script under such a shell if you do have one."
++ fi
++ exit 1
++fi
++fi
++fi
++SHELL=${CONFIG_SHELL-/bin/sh}
++export SHELL
++# Unset more variables known to interfere with behavior of common tools.
++CLICOLOR_FORCE= GREP_OPTIONS=
++unset CLICOLOR_FORCE GREP_OPTIONS
++
++## --------------------- ##
++## M4sh Shell Functions. ##
++## --------------------- ##
++# as_fn_unset VAR
++# ---------------
++# Portably unset VAR.
++as_fn_unset ()
++{
++ { eval $1=; unset $1;}
++}
++as_unset=as_fn_unset
++
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
++
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++
++# as_fn_mkdir_p
++# -------------
++# Create "$as_dir" as a directory, including parents if necessary.
++as_fn_mkdir_p ()
++{
++
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
++ esac
++ test -d "$as_dir" || eval $as_mkdir_p || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
++
++
++} # as_fn_mkdir_p
++# as_fn_append VAR VALUE
++# ----------------------
++# Append the text in VALUE to the end of the definition contained in VAR. Take
++# advantage of any shell optimizations that allow amortized linear growth over
++# repeated appends, instead of the typical quadratic growth present in naive
++# implementations.
++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
++ eval 'as_fn_append ()
++ {
++ eval $1+=\$2
++ }'
++else
++ as_fn_append ()
++ {
++ eval $1=\$$1\$2
++ }
++fi # as_fn_append
++
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
++else
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
++
++
++# as_fn_error STATUS ERROR [LINENO LOG_FD]
++# ----------------------------------------
++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
++# script with STATUS, using 1 if that was 0.
++as_fn_error ()
++{
++ as_status=$1; test $as_status -eq 0 && as_status=1
++ if test "$4"; then
++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
++ fi
++ $as_echo "$as_me: error: $2" >&2
++ as_fn_exit $as_status
++} # as_fn_error
++
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
++
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++
++ as_lineno_1=$LINENO as_lineno_1a=$LINENO
++ as_lineno_2=$LINENO as_lineno_2a=$LINENO
++ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
++ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
++ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
++ sed -n '
++ p
++ /[$]LINENO/=
++ ' <$as_myself |
++ sed '
++ s/[$]LINENO.*/&-/
++ t lineno
++ b
++ :lineno
++ N
++ :loop
++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
++ t loop
++ s/-\n.*//
++ ' >$as_me.lineno &&
++ chmod +x "$as_me.lineno" ||
++ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensitive to this).
++ . "./$as_me.lineno"
++ # Exit status is that of the last command.
++ exit
++}
++
++ECHO_C= ECHO_N= ECHO_T=
++case `echo -n x` in #(((((
++-n*)
++ case `echo 'xy\c'` in
++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
++ xy) ECHO_C='\c';;
++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
++ ECHO_T=' ';;
++ esac;;
++*)
++ ECHO_N='-n';;
++esac
++
++rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++ rm -f conf$$.dir/conf$$.file
++else
++ rm -f conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -p'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++ else
++ as_ln_s='cp -p'
++ fi
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p='mkdir -p "$as_dir"'
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++if test -x / >/dev/null 2>&1; then
++ as_test_x='test -x'
++else
++ if ls -dL / >/dev/null 2>&1; then
++ as_ls_L_option=L
++ else
++ as_ls_L_option=
++ fi
++ as_test_x='
++ eval sh -c '\''
++ if test -d "$1"; then
++ test -d "$1/.";
++ else
++ case $1 in #(
++ -*)set "./$1";;
++ esac;
++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
++ ???[sx]*):;;*)false;;esac;fi
++ '\'' sh
++ '
++fi
++as_executable_p=$as_test_x
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++
++test -n "$DJDIR" || exec 7<&0 </dev/null
++exec 6>&1
++
++# Name of the host.
++# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
++# so uname gets run too.
++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
++
++#
++# Initializations.
++#
++ac_default_prefix=/usr/local
++ac_clean_files=
++ac_config_libobj_dir=.
++LIBOBJS=
++cross_compiling=no
++subdirs=
++MFLAGS=
++MAKEFLAGS=
++
++# Identity of this package.
++PACKAGE_NAME='libmspack'
++PACKAGE_TARNAME='libmspack'
++PACKAGE_VERSION='0.4alpha'
++PACKAGE_STRING='libmspack 0.4alpha'
++PACKAGE_BUGREPORT='kyzer at 4u.net'
++PACKAGE_URL=''
++
++ac_unique_file="mspack/mspack.h"
++# Factoring default headers for most tests.
++ac_includes_default="\
++#include <stdio.h>
++#ifdef HAVE_SYS_TYPES_H
++# include <sys/types.h>
++#endif
++#ifdef HAVE_SYS_STAT_H
++# include <sys/stat.h>
++#endif
++#ifdef STDC_HEADERS
++# include <stdlib.h>
++# include <stddef.h>
++#else
++# ifdef HAVE_STDLIB_H
++# include <stdlib.h>
++# endif
++#endif
++#ifdef HAVE_STRING_H
++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
++# include <memory.h>
++# endif
++# include <string.h>
++#endif
++#ifdef HAVE_STRINGS_H
++# include <strings.h>
++#endif
++#ifdef HAVE_INTTYPES_H
++# include <inttypes.h>
++#endif
++#ifdef HAVE_STDINT_H
++# include <stdint.h>
++#endif
++#ifdef HAVE_UNISTD_H
++# include <unistd.h>
++#endif"
++
++ac_subst_vars='am__EXEEXT_FALSE
++am__EXEEXT_TRUE
++LTLIBOBJS
++LIBOBJS
++CPP
++OTOOL64
++OTOOL
++LIPO
++NMEDIT
++DSYMUTIL
++MANIFEST_TOOL
++RANLIB
++ac_ct_AR
++AR
++DLLTOOL
++OBJDUMP
++LN_S
++NM
++ac_ct_DUMPBIN
++DUMPBIN
++LD
++FGREP
++EGREP
++GREP
++SED
++host_os
++host_vendor
++host_cpu
++host
++build_os
++build_vendor
++build_cpu
++build
++LIBTOOL
++GCC_FALSE
++GCC_TRUE
++am__fastdepCC_FALSE
++am__fastdepCC_TRUE
++CCDEPMODE
++am__nodep
++AMDEPBACKSLASH
++AMDEP_FALSE
++AMDEP_TRUE
++am__quote
++am__include
++DEPDIR
++OBJEXT
++EXEEXT
++ac_ct_CC
++CPPFLAGS
++LDFLAGS
++CFLAGS
++CC
++DEBUG_FALSE
++DEBUG_TRUE
++AM_BACKSLASH
++AM_DEFAULT_VERBOSITY
++AM_DEFAULT_V
++AM_V
++am__untar
++am__tar
++AMTAR
++am__leading_dot
++SET_MAKE
++AWK
++mkdir_p
++MKDIR_P
++INSTALL_STRIP_PROGRAM
++STRIP
++install_sh
++MAKEINFO
++AUTOHEADER
++AUTOMAKE
++AUTOCONF
++ACLOCAL
++VERSION
++PACKAGE
++CYGPATH_W
++am__isrc
++INSTALL_DATA
++INSTALL_SCRIPT
++INSTALL_PROGRAM
++target_alias
++host_alias
++build_alias
++LIBS
++ECHO_T
++ECHO_N
++ECHO_C
++DEFS
++mandir
++localedir
++libdir
++psdir
++pdfdir
++dvidir
++htmldir
++infodir
++docdir
++oldincludedir
++includedir
++localstatedir
++sharedstatedir
++sysconfdir
++datadir
++datarootdir
++libexecdir
++sbindir
++bindir
++program_transform_name
++prefix
++exec_prefix
++PACKAGE_URL
++PACKAGE_BUGREPORT
++PACKAGE_STRING
++PACKAGE_VERSION
++PACKAGE_TARNAME
++PACKAGE_NAME
++PATH_SEPARATOR
++SHELL'
++ac_subst_files=''
++ac_user_opts='
++enable_option_checking
++enable_silent_rules
++enable_debug
++enable_dependency_tracking
++enable_shared
++enable_static
++with_pic
++enable_fast_install
++with_gnu_ld
++with_sysroot
++enable_libtool_lock
++enable_largefile
++'
++ ac_precious_vars='build_alias
++host_alias
++target_alias
++CC
++CFLAGS
++LDFLAGS
++LIBS
++CPPFLAGS
++CPP'
++
++
++# Initialize some variables set by options.
++ac_init_help=
++ac_init_version=false
++ac_unrecognized_opts=
++ac_unrecognized_sep=
++# The variables have the same names as the options, with
++# dashes changed to underlines.
++cache_file=/dev/null
++exec_prefix=NONE
++no_create=
++no_recursion=
++prefix=NONE
++program_prefix=NONE
++program_suffix=NONE
++program_transform_name=s,x,x,
++silent=
++site=
++srcdir=
++verbose=
++x_includes=NONE
++x_libraries=NONE
++
++# Installation directory options.
++# These are left unexpanded so users can "make install exec_prefix=/foo"
++# and all the variables that are supposed to be based on exec_prefix
++# by default will actually change.
++# Use braces instead of parens because sh, perl, etc. also accept them.
++# (The list follows the same order as the GNU Coding Standards.)
++bindir='${exec_prefix}/bin'
++sbindir='${exec_prefix}/sbin'
++libexecdir='${exec_prefix}/libexec'
++datarootdir='${prefix}/share'
++datadir='${datarootdir}'
++sysconfdir='${prefix}/etc'
++sharedstatedir='${prefix}/com'
++localstatedir='${prefix}/var'
++includedir='${prefix}/include'
++oldincludedir='/usr/include'
++docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
++infodir='${datarootdir}/info'
++htmldir='${docdir}'
++dvidir='${docdir}'
++pdfdir='${docdir}'
++psdir='${docdir}'
++libdir='${exec_prefix}/lib'
++localedir='${datarootdir}/locale'
++mandir='${datarootdir}/man'
++
++ac_prev=
++ac_dashdash=
++for ac_option
++do
++ # If the previous option needs an argument, assign it.
++ if test -n "$ac_prev"; then
++ eval $ac_prev=\$ac_option
++ ac_prev=
++ continue
++ fi
++
++ case $ac_option in
++ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
++ *=) ac_optarg= ;;
++ *) ac_optarg=yes ;;
++ esac
++
++ # Accept the important Cygnus configure options, so we can diagnose typos.
++
++ case $ac_dashdash$ac_option in
++ --)
++ ac_dashdash=yes ;;
++
++ -bindir | --bindir | --bindi | --bind | --bin | --bi)
++ ac_prev=bindir ;;
++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
++ bindir=$ac_optarg ;;
++
++ -build | --build | --buil | --bui | --bu)
++ ac_prev=build_alias ;;
++ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
++ build_alias=$ac_optarg ;;
++
++ -cache-file | --cache-file | --cache-fil | --cache-fi \
++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
++ ac_prev=cache_file ;;
++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
++ cache_file=$ac_optarg ;;
++
++ --config-cache | -C)
++ cache_file=config.cache ;;
++
++ -datadir | --datadir | --datadi | --datad)
++ ac_prev=datadir ;;
++ -datadir=* | --datadir=* | --datadi=* | --datad=*)
++ datadir=$ac_optarg ;;
++
++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
++ | --dataroo | --dataro | --datar)
++ ac_prev=datarootdir ;;
++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
++ datarootdir=$ac_optarg ;;
++
++ -disable-* | --disable-*)
++ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid feature name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval enable_$ac_useropt=no ;;
++
++ -docdir | --docdir | --docdi | --doc | --do)
++ ac_prev=docdir ;;
++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
++ docdir=$ac_optarg ;;
++
++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
++ ac_prev=dvidir ;;
++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
++ dvidir=$ac_optarg ;;
++
++ -enable-* | --enable-*)
++ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid feature name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"enable_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval enable_$ac_useropt=\$ac_optarg ;;
++
++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
++ | --exec | --exe | --ex)
++ ac_prev=exec_prefix ;;
++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
++ | --exec=* | --exe=* | --ex=*)
++ exec_prefix=$ac_optarg ;;
++
++ -gas | --gas | --ga | --g)
++ # Obsolete; use --with-gas.
++ with_gas=yes ;;
++
++ -help | --help | --hel | --he | -h)
++ ac_init_help=long ;;
++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
++ ac_init_help=recursive ;;
++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
++ ac_init_help=short ;;
++
++ -host | --host | --hos | --ho)
++ ac_prev=host_alias ;;
++ -host=* | --host=* | --hos=* | --ho=*)
++ host_alias=$ac_optarg ;;
++
++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
++ ac_prev=htmldir ;;
++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
++ | --ht=*)
++ htmldir=$ac_optarg ;;
++
++ -includedir | --includedir | --includedi | --included | --include \
++ | --includ | --inclu | --incl | --inc)
++ ac_prev=includedir ;;
++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
++ | --includ=* | --inclu=* | --incl=* | --inc=*)
++ includedir=$ac_optarg ;;
++
++ -infodir | --infodir | --infodi | --infod | --info | --inf)
++ ac_prev=infodir ;;
++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
++ infodir=$ac_optarg ;;
++
++ -libdir | --libdir | --libdi | --libd)
++ ac_prev=libdir ;;
++ -libdir=* | --libdir=* | --libdi=* | --libd=*)
++ libdir=$ac_optarg ;;
++
++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
++ | --libexe | --libex | --libe)
++ ac_prev=libexecdir ;;
++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
++ | --libexe=* | --libex=* | --libe=*)
++ libexecdir=$ac_optarg ;;
++
++ -localedir | --localedir | --localedi | --localed | --locale)
++ ac_prev=localedir ;;
++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
++ localedir=$ac_optarg ;;
++
++ -localstatedir | --localstatedir | --localstatedi | --localstated \
++ | --localstate | --localstat | --localsta | --localst | --locals)
++ ac_prev=localstatedir ;;
++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
++ localstatedir=$ac_optarg ;;
++
++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
++ ac_prev=mandir ;;
++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
++ mandir=$ac_optarg ;;
++
++ -nfp | --nfp | --nf)
++ # Obsolete; use --without-fp.
++ with_fp=no ;;
++
++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
++ | --no-cr | --no-c | -n)
++ no_create=yes ;;
++
++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
++ no_recursion=yes ;;
++
++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
++ | --oldin | --oldi | --old | --ol | --o)
++ ac_prev=oldincludedir ;;
++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
++ oldincludedir=$ac_optarg ;;
++
++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
++ ac_prev=prefix ;;
++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
++ prefix=$ac_optarg ;;
++
++ -program-prefix | --program-prefix | --program-prefi | --program-pref \
++ | --program-pre | --program-pr | --program-p)
++ ac_prev=program_prefix ;;
++ -program-prefix=* | --program-prefix=* | --program-prefi=* \
++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
++ program_prefix=$ac_optarg ;;
++
++ -program-suffix | --program-suffix | --program-suffi | --program-suff \
++ | --program-suf | --program-su | --program-s)
++ ac_prev=program_suffix ;;
++ -program-suffix=* | --program-suffix=* | --program-suffi=* \
++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
++ program_suffix=$ac_optarg ;;
++
++ -program-transform-name | --program-transform-name \
++ | --program-transform-nam | --program-transform-na \
++ | --program-transform-n | --program-transform- \
++ | --program-transform | --program-transfor \
++ | --program-transfo | --program-transf \
++ | --program-trans | --program-tran \
++ | --progr-tra | --program-tr | --program-t)
++ ac_prev=program_transform_name ;;
++ -program-transform-name=* | --program-transform-name=* \
++ | --program-transform-nam=* | --program-transform-na=* \
++ | --program-transform-n=* | --program-transform-=* \
++ | --program-transform=* | --program-transfor=* \
++ | --program-transfo=* | --program-transf=* \
++ | --program-trans=* | --program-tran=* \
++ | --progr-tra=* | --program-tr=* | --program-t=*)
++ program_transform_name=$ac_optarg ;;
++
++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
++ ac_prev=pdfdir ;;
++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
++ pdfdir=$ac_optarg ;;
++
++ -psdir | --psdir | --psdi | --psd | --ps)
++ ac_prev=psdir ;;
++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
++ psdir=$ac_optarg ;;
++
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ silent=yes ;;
++
++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
++ ac_prev=sbindir ;;
++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
++ | --sbi=* | --sb=*)
++ sbindir=$ac_optarg ;;
++
++ -sharedstatedir | --sharedstatedir | --sharedstatedi \
++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
++ | --sharedst | --shareds | --shared | --share | --shar \
++ | --sha | --sh)
++ ac_prev=sharedstatedir ;;
++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
++ | --sha=* | --sh=*)
++ sharedstatedir=$ac_optarg ;;
++
++ -site | --site | --sit)
++ ac_prev=site ;;
++ -site=* | --site=* | --sit=*)
++ site=$ac_optarg ;;
++
++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
++ ac_prev=srcdir ;;
++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
++ srcdir=$ac_optarg ;;
++
++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
++ | --syscon | --sysco | --sysc | --sys | --sy)
++ ac_prev=sysconfdir ;;
++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
++ sysconfdir=$ac_optarg ;;
++
++ -target | --target | --targe | --targ | --tar | --ta | --t)
++ ac_prev=target_alias ;;
++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
++ target_alias=$ac_optarg ;;
++
++ -v | -verbose | --verbose | --verbos | --verbo | --verb)
++ verbose=yes ;;
++
++ -version | --version | --versio | --versi | --vers | -V)
++ ac_init_version=: ;;
++
++ -with-* | --with-*)
++ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid package name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval with_$ac_useropt=\$ac_optarg ;;
++
++ -without-* | --without-*)
++ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
++ as_fn_error $? "invalid package name: $ac_useropt"
++ ac_useropt_orig=$ac_useropt
++ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
++ case $ac_user_opts in
++ *"
++"with_$ac_useropt"
++"*) ;;
++ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
++ ac_unrecognized_sep=', ';;
++ esac
++ eval with_$ac_useropt=no ;;
++
++ --x)
++ # Obsolete; use --with-x.
++ with_x=yes ;;
++
++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
++ | --x-incl | --x-inc | --x-in | --x-i)
++ ac_prev=x_includes ;;
++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
++ x_includes=$ac_optarg ;;
++
++ -x-libraries | --x-libraries | --x-librarie | --x-librari \
++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
++ ac_prev=x_libraries ;;
++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
++ x_libraries=$ac_optarg ;;
++
++ -*) as_fn_error $? "unrecognized option: \`$ac_option'
++Try \`$0 --help' for more information"
++ ;;
++
++ *=*)
++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
++ # Reject names that are not valid shell variable names.
++ case $ac_envvar in #(
++ '' | [0-9]* | *[!_$as_cr_alnum]* )
++ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
++ esac
++ eval $ac_envvar=\$ac_optarg
++ export $ac_envvar ;;
++
++ *)
++ # FIXME: should be removed in autoconf 3.0.
++ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
++ ;;
++
++ esac
++done
++
++if test -n "$ac_prev"; then
++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
++ as_fn_error $? "missing argument to $ac_option"
++fi
++
++if test -n "$ac_unrecognized_opts"; then
++ case $enable_option_checking in
++ no) ;;
++ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
++ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
++ esac
++fi
++
++# Check all directory arguments for consistency.
++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
++ datadir sysconfdir sharedstatedir localstatedir includedir \
++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
++ libdir localedir mandir
++do
++ eval ac_val=\$$ac_var
++ # Remove trailing slashes.
++ case $ac_val in
++ */ )
++ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
++ eval $ac_var=\$ac_val;;
++ esac
++ # Be sure to have absolute directory names.
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* ) continue;;
++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
++ esac
++ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
++done
++
++# There might be people who depend on the old broken behavior: `$host'
++# used to hold the argument of --host etc.
++# FIXME: To remove some day.
++build=$build_alias
++host=$host_alias
++target=$target_alias
++
++# FIXME: To remove some day.
++if test "x$host_alias" != x; then
++ if test "x$build_alias" = x; then
++ cross_compiling=maybe
++ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
++ If a cross compiler is detected then cross compile mode will be used" >&2
++ elif test "x$build_alias" != "x$host_alias"; then
++ cross_compiling=yes
++ fi
++fi
++
++ac_tool_prefix=
++test -n "$host_alias" && ac_tool_prefix=$host_alias-
++
++test "$silent" = yes && exec 6>/dev/null
++
++
++ac_pwd=`pwd` && test -n "$ac_pwd" &&
++ac_ls_di=`ls -di .` &&
++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
++ as_fn_error $? "working directory cannot be determined"
++test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
++ as_fn_error $? "pwd does not report name of working directory"
++
++
++# Find the source files, if location was not specified.
++if test -z "$srcdir"; then
++ ac_srcdir_defaulted=yes
++ # Try the directory containing this script, then the parent directory.
++ ac_confdir=`$as_dirname -- "$as_myself" ||
++$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_myself" : 'X\(//\)[^/]' \| \
++ X"$as_myself" : 'X\(//\)$' \| \
++ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_myself" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ srcdir=$ac_confdir
++ if test ! -r "$srcdir/$ac_unique_file"; then
++ srcdir=..
++ fi
++else
++ ac_srcdir_defaulted=no
++fi
++if test ! -r "$srcdir/$ac_unique_file"; then
++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
++ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
++fi
++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
++ac_abs_confdir=`(
++ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
++ pwd)`
++# When building in place, set srcdir=.
++if test "$ac_abs_confdir" = "$ac_pwd"; then
++ srcdir=.
++fi
++# Remove unnecessary trailing slashes from srcdir.
++# Double slashes in file names in object file debugging info
++# mess up M-x gdb in Emacs.
++case $srcdir in
++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
++esac
++for ac_var in $ac_precious_vars; do
++ eval ac_env_${ac_var}_set=\${${ac_var}+set}
++ eval ac_env_${ac_var}_value=\$${ac_var}
++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
++ eval ac_cv_env_${ac_var}_value=\$${ac_var}
++done
++
++#
++# Report the --help message.
++#
++if test "$ac_init_help" = "long"; then
++ # Omit some internal or obsolete options to make the list less imposing.
++ # This message is too long to be a string in the A/UX 3.1 sh.
++ cat <<_ACEOF
++\`configure' configures libmspack 0.4alpha to adapt to many kinds of systems.
++
++Usage: $0 [OPTION]... [VAR=VALUE]...
++
++To assign environment variables (e.g., CC, CFLAGS...), specify them as
++VAR=VALUE. See below for descriptions of some of the useful variables.
++
++Defaults for the options are specified in brackets.
++
++Configuration:
++ -h, --help display this help and exit
++ --help=short display options specific to this package
++ --help=recursive display the short help of all the included packages
++ -V, --version display version information and exit
++ -q, --quiet, --silent do not print \`checking ...' messages
++ --cache-file=FILE cache test results in FILE [disabled]
++ -C, --config-cache alias for \`--cache-file=config.cache'
++ -n, --no-create do not create output files
++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
++
++Installation directories:
++ --prefix=PREFIX install architecture-independent files in PREFIX
++ [$ac_default_prefix]
++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
++ [PREFIX]
++
++By default, \`make install' will install all the files in
++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
++for instance \`--prefix=\$HOME'.
++
++For better control, use the options below.
++
++Fine tuning of the installation directories:
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
++ --infodir=DIR info documentation [DATAROOTDIR/info]
++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
++ --mandir=DIR man documentation [DATAROOTDIR/man]
++ --docdir=DIR documentation root [DATAROOTDIR/doc/libmspack]
++ --htmldir=DIR html documentation [DOCDIR]
++ --dvidir=DIR dvi documentation [DOCDIR]
++ --pdfdir=DIR pdf documentation [DOCDIR]
++ --psdir=DIR ps documentation [DOCDIR]
++_ACEOF
++
++ cat <<\_ACEOF
++
++Program names:
++ --program-prefix=PREFIX prepend PREFIX to installed program names
++ --program-suffix=SUFFIX append SUFFIX to installed program names
++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
++
++System types:
++ --build=BUILD configure for building on BUILD [guessed]
++ --host=HOST cross-compile to build programs to run on HOST [BUILD]
++_ACEOF
++fi
++
++if test -n "$ac_init_help"; then
++ case $ac_init_help in
++ short | recursive ) echo "Configuration of libmspack 0.4alpha:";;
++ esac
++ cat <<\_ACEOF
++
++Optional Features:
++ --disable-option-checking ignore unrecognized --enable/--with options
++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
++ --enable-silent-rules less verbose build output (undo: `make V=1')
++ --disable-silent-rules verbose build output (undo: `make V=0')
++ --enable-debug enable debugging
++ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors
++ --enable-shared[=PKGS] build shared libraries [default=yes]
++ --enable-static[=PKGS] build static libraries [default=yes]
++ --enable-fast-install[=PKGS]
++ optimize for fast installation [default=yes]
++ --disable-libtool-lock avoid locking (might break parallel builds)
++ --disable-largefile omit support for large files
++
++Optional Packages:
++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
++ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
++ both]
++ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
++ --with-sysroot=DIR Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).
++
++Some influential environment variables:
++ CC C compiler command
++ CFLAGS C compiler flags
++ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
++ nonstandard directory <lib dir>
++ LIBS libraries to pass to the linker, e.g. -l<library>
++ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
++ you have headers in a nonstandard directory <include dir>
++ CPP C preprocessor
++
++Use these variables to override the choices made by `configure' or to help
++it to find libraries and programs with nonstandard names/locations.
++
++Report bugs to <kyzer at 4u.net>.
++_ACEOF
++ac_status=$?
++fi
++
++if test "$ac_init_help" = "recursive"; then
++ # If there are subdirs, report their specific --help.
++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
++ test -d "$ac_dir" ||
++ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
++ continue
++ ac_builddir=.
++
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
++
++case $srcdir in
++ .) # We are building in place.
++ ac_srcdir=.
++ ac_top_srcdir=$ac_top_builddir_sub
++ ac_abs_top_srcdir=$ac_pwd ;;
++ [\\/]* | ?:[\\/]* ) # Absolute name.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir
++ ac_abs_top_srcdir=$srcdir ;;
++ *) # Relative name.
++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_build_prefix$srcdir
++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
++esac
++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
++
++ cd "$ac_dir" || { ac_status=$?; continue; }
++ # Check for guested configure.
++ if test -f "$ac_srcdir/configure.gnu"; then
++ echo &&
++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
++ elif test -f "$ac_srcdir/configure"; then
++ echo &&
++ $SHELL "$ac_srcdir/configure" --help=recursive
++ else
++ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ fi || ac_status=$?
++ cd "$ac_pwd" || { ac_status=$?; break; }
++ done
++fi
++
++test -n "$ac_init_help" && exit $ac_status
++if $ac_init_version; then
++ cat <<\_ACEOF
++libmspack configure 0.4alpha
++generated by GNU Autoconf 2.68
++
++Copyright (C) 2010 Free Software Foundation, Inc.
++This configure script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it.
++_ACEOF
++ exit
++fi
++
++## ------------------------ ##
++## Autoconf initialization. ##
++## ------------------------ ##
++
++# ac_fn_c_try_compile LINENO
++# --------------------------
++# Try to compile conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_compile ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ rm -f conftest.$ac_objext
++ if { { ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compile") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest.$ac_objext; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=1
++fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_compile
++
++# ac_fn_c_try_link LINENO
++# -----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_link ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ rm -f conftest.$ac_objext conftest$ac_exeext
++ if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && {
++ test -z "$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ } && test -s conftest$ac_exeext && {
++ test "$cross_compiling" = yes ||
++ $as_test_x conftest$ac_exeext
++ }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=1
++fi
++ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
++ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
++ # interfere with the next link command; also delete a directory that is
++ # left behind by Apple's compiler. We do this before executing the actions.
++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_link
++
++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
++# -------------------------------------------------------
++# Tests whether HEADER exists and can be compiled using the include files in
++# INCLUDES, setting the cache variable VAR accordingly.
++ac_fn_c_check_header_compile ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++#include <$2>
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ eval "$3=yes"
++else
++ eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_header_compile
++
++# ac_fn_c_try_cpp LINENO
++# ----------------------
++# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_cpp ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if { { ac_try="$ac_cpp conftest.$ac_ext"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ grep -v '^ *+' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ mv -f conftest.er1 conftest.err
++ fi
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } > conftest.i && {
++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
++ test ! -s conftest.err
++ }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=1
++fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_cpp
++
++# ac_fn_c_try_run LINENO
++# ----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
++# that executables *can* be run.
++ac_fn_c_try_run ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
++ { { case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_try") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; }; then :
++ ac_retval=0
++else
++ $as_echo "$as_me: program exited with status $ac_status" >&5
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_retval=$ac_status
++fi
++ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_run
++
++# ac_fn_c_check_func LINENO FUNC VAR
++# ----------------------------------
++# Tests whether FUNC exists, setting the cache variable VAR accordingly
++ac_fn_c_check_func ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define $2 innocuous_$2
++
++/* System header to define __stub macros and hopefully few prototypes,
++ which can conflict with char $2 (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef $2
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char $2 ();
++/* The GNU C library defines this for functions which it implements
++ to always fail with ENOSYS. Some functions are actually named
++ something starting with __ and the normal name is an alias. */
++#if defined __stub_$2 || defined __stub___$2
++choke me
++#endif
++
++int
++main ()
++{
++return $2 ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ eval "$3=yes"
++else
++ eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_func
++
++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
++# -------------------------------------------------------
++# Tests whether HEADER exists, giving a warning if it cannot be compiled using
++# the include files in INCLUDES and setting the cache variable VAR
++# accordingly.
++ac_fn_c_check_header_mongrel ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if eval \${$3+:} false; then :
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++else
++ # Is the header compilable?
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
++$as_echo_n "checking $2 usability... " >&6; }
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++#include <$2>
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_header_compiler=yes
++else
++ ac_header_compiler=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
++$as_echo "$ac_header_compiler" >&6; }
++
++# Is the header present?
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
++$as_echo_n "checking $2 presence... " >&6; }
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <$2>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++ ac_header_preproc=yes
++else
++ ac_header_preproc=no
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
++$as_echo "$ac_header_preproc" >&6; }
++
++# So? What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
++ yes:no: )
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
++ ;;
++ no:yes:* )
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
++$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
++$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
++( $as_echo "## --------------------------- ##
++## Report this to kyzer at 4u.net ##
++## --------------------------- ##"
++ ) | sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++esac
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ eval "$3=\$ac_header_compiler"
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_header_mongrel
++
++# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
++# -------------------------------------------
++# Tests whether TYPE exists after having included INCLUDES, setting cache
++# variable VAR accordingly.
++ac_fn_c_check_type ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval \${$3+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ eval "$3=no"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++if (sizeof ($2))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++if (sizeof (($2)))
++ return 0;
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++
++else
++ eval "$3=yes"
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++
++} # ac_fn_c_check_type
++
++# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
++# --------------------------------------------
++# Tries to find the compile-time value of EXPR in a program that includes
++# INCLUDES, setting VAR accordingly. Returns whether the value could be
++# computed
++ac_fn_c_compute_int ()
++{
++ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ if test "$cross_compiling" = yes; then
++ # Depending upon the size, compute the lo and hi bounds.
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) >= 0)];
++test_array [0] = 0
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_lo=0 ac_mid=0
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) <= $ac_mid)];
++test_array [0] = 0
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_hi=$ac_mid; break
++else
++ as_fn_arith $ac_mid + 1 && ac_lo=$as_val
++ if test $ac_lo -le $ac_mid; then
++ ac_lo= ac_hi=
++ break
++ fi
++ as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ done
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) < 0)];
++test_array [0] = 0
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_hi=-1 ac_mid=-1
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) >= $ac_mid)];
++test_array [0] = 0
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_lo=$ac_mid; break
++else
++ as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
++ if test $ac_mid -le $ac_hi; then
++ ac_lo= ac_hi=
++ break
++ fi
++ as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ done
++else
++ ac_lo= ac_hi=
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++# Binary search between lo and hi bounds.
++while test "x$ac_lo" != "x$ac_hi"; do
++ as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++int
++main ()
++{
++static int test_array [1 - 2 * !(($2) <= $ac_mid)];
++test_array [0] = 0
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_hi=$ac_mid
++else
++ as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++done
++case $ac_lo in #((
++?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
++'') ac_retval=1 ;;
++esac
++ else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++$4
++static long int longval () { return $2; }
++static unsigned long int ulongval () { return $2; }
++#include <stdio.h>
++#include <stdlib.h>
++int
++main ()
++{
++
++ FILE *f = fopen ("conftest.val", "w");
++ if (! f)
++ return 1;
++ if (($2) < 0)
++ {
++ long int i = longval ();
++ if (i != ($2))
++ return 1;
++ fprintf (f, "%ld", i);
++ }
++ else
++ {
++ unsigned long int i = ulongval ();
++ if (i != ($2))
++ return 1;
++ fprintf (f, "%lu", i);
++ }
++ /* Do not output a trailing newline, as this causes \r\n confusion
++ on some platforms. */
++ return ferror (f) || fclose (f) != 0;
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++ echo >>conftest.val; read $3 <conftest.val; ac_retval=0
++else
++ ac_retval=1
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++rm -f conftest.val
++
++ fi
++ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
++ as_fn_set_status $ac_retval
++
++} # ac_fn_c_compute_int
++cat >config.log <<_ACEOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++
++It was created by libmspack $as_me 0.4alpha, which was
++generated by GNU Autoconf 2.68. Invocation command line was
++
++ $ $0 $@
++
++_ACEOF
++exec 5>>config.log
++{
++cat <<_ASUNAME
++## --------- ##
++## Platform. ##
++## --------- ##
++
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++
++_ASUNAME
++
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ $as_echo "PATH: $as_dir"
++ done
++IFS=$as_save_IFS
++
++} >&5
++
++cat >&5 <<_ACEOF
++
++
++## ----------- ##
++## Core tests. ##
++## ----------- ##
++
++_ACEOF
++
++
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
++# Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
++ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
++ac_must_keep_next=false
++for ac_pass in 1 2
++do
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *\'*)
++ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
++ 2)
++ as_fn_append ac_configure_args1 " '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ as_fn_append ac_configure_args " '$ac_arg'"
++ ;;
++ esac
++ done
++done
++{ ac_configure_args0=; unset ac_configure_args0;}
++{ ac_configure_args1=; unset ac_configure_args1;}
++
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++# WARNING: Use '\'' to represent an apostrophe within the trap.
++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ {
++ echo
++
++ $as_echo "## ---------------- ##
++## Cache variables. ##
++## ---------------- ##"
++ echo
++ # The following way of writing the cache mishandles newlines in values,
++(
++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) { eval $ac_var=; unset $ac_var;} ;;
++ esac ;;
++ esac
++ done
++ (set) 2>&1 |
++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ sed -n \
++ "s/'\''/'\''\\\\'\'''\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
++ ;; #(
++ *)
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++)
++ echo
++
++ $as_echo "## ----------------- ##
++## Output variables. ##
++## ----------------- ##"
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++
++ if test -n "$ac_subst_files"; then
++ $as_echo "## ------------------- ##
++## File substitutions. ##
++## ------------------- ##"
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=\$$ac_var
++ case $ac_val in
++ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
++ esac
++ $as_echo "$ac_var='\''$ac_val'\''"
++ done | sort
++ echo
++ fi
++
++ if test -s confdefs.h; then
++ $as_echo "## ----------- ##
++## confdefs.h. ##
++## ----------- ##"
++ echo
++ cat confdefs.h
++ echo
++ fi
++ test "$ac_signal" != 0 &&
++ $as_echo "$as_me: caught signal $ac_signal"
++ $as_echo "$as_me: exit $exit_status"
++ } >&5
++ rm -f core *.core core.conftest.* &&
++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
++ exit $exit_status
++' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
++done
++ac_signal=0
++
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -f -r conftest* confdefs.h
++
++$as_echo "/* confdefs.h */" > confdefs.h
++
++# Predefined preprocessor variables.
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_NAME "$PACKAGE_NAME"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_VERSION "$PACKAGE_VERSION"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_STRING "$PACKAGE_STRING"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++_ACEOF
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_URL "$PACKAGE_URL"
++_ACEOF
++
++
++# Let the site file select an alternate cache file if it wants to.
++# Prefer an explicitly selected file to automatically selected ones.
++ac_site_file1=NONE
++ac_site_file2=NONE
++if test -n "$CONFIG_SITE"; then
++ # We do not want a PATH search for config.site.
++ case $CONFIG_SITE in #((
++ -*) ac_site_file1=./$CONFIG_SITE;;
++ */*) ac_site_file1=$CONFIG_SITE;;
++ *) ac_site_file1=./$CONFIG_SITE;;
++ esac
++elif test "x$prefix" != xNONE; then
++ ac_site_file1=$prefix/share/config.site
++ ac_site_file2=$prefix/etc/config.site
++else
++ ac_site_file1=$ac_default_prefix/share/config.site
++ ac_site_file2=$ac_default_prefix/etc/config.site
++fi
++for ac_site_file in "$ac_site_file1" "$ac_site_file2"
++do
++ test "x$ac_site_file" = xNONE && continue
++ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
++$as_echo "$as_me: loading site script $ac_site_file" >&6;}
++ sed 's/^/| /' "$ac_site_file" >&5
++ . "$ac_site_file" \
++ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "failed to load site script $ac_site_file
++See \`config.log' for more details" "$LINENO" 5; }
++ fi
++done
++
++if test -r "$cache_file"; then
++ # Some versions of bash will fail to source /dev/null (special files
++ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
++ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
++$as_echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . "$cache_file";;
++ *) . "./$cache_file";;
++ esac
++ fi
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
++$as_echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
++fi
++
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in $ac_precious_vars; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val=\$ac_cv_env_${ac_var}_value
++ eval ac_new_val=\$ac_env_${ac_var}_value
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
++$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ # differences in whitespace do not lead to failure.
++ ac_old_val_w=`echo x $ac_old_val`
++ ac_new_val_w=`echo x $ac_new_val`
++ if test "$ac_old_val_w" != "$ac_new_val_w"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
++$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ ac_cache_corrupted=:
++ else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
++$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
++ eval $ac_var=\$ac_old_val
++ fi
++ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
++$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
++$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
++ fi;;
++ esac
++ # Pass precious variables to config.status.
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *) ac_arg=$ac_var=$ac_new_val ;;
++ esac
++ case " $ac_configure_args " in
++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
++ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
++ esac
++ fi
++done
++if $ac_cache_corrupted; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
++$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
++fi
++## -------------------- ##
++## Main body of script. ##
++## -------------------- ##
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++
++am__api_version='1.11'
++
++ac_aux_dir=
++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
++ if test -f "$ac_dir/install-sh"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/install-sh -c"
++ break
++ elif test -f "$ac_dir/install.sh"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/install.sh -c"
++ break
++ elif test -f "$ac_dir/shtool"; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
++ fi
++done
++if test -z "$ac_aux_dir"; then
++ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
++fi
++
++# These three variables are undocumented and unsupported,
++# and are intended to be withdrawn in a future Autoconf release.
++# They can cause serious problems if a builder's source tree is in a directory
++# whose full name contains unusual characters.
++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
++
++
++# Find a good install program. We prefer a C program (faster),
++# so one script is as good as another. But avoid the broken or
++# incompatible versions:
++# SysV /etc/install, /usr/sbin/install
++# SunOS /usr/etc/install
++# IRIX /sbin/install
++# AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
++# ./install, which can be erroneously created by make from ./install.sh.
++# Reject install programs that cannot install multiple files.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
++$as_echo_n "checking for a BSD-compatible install... " >&6; }
++if test -z "$INSTALL"; then
++if ${ac_cv_path_install+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in #((
++ ./ | .// | /[cC]/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ rm -rf conftest.one conftest.two conftest.dir
++ echo one > conftest.one
++ echo two > conftest.two
++ mkdir conftest.dir
++ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
++ test -s conftest.one && test -s conftest.two &&
++ test -s conftest.dir/conftest.one &&
++ test -s conftest.dir/conftest.two
++ then
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
++ fi
++ fi
++ done
++ done
++ ;;
++esac
++
++ done
++IFS=$as_save_IFS
++
++rm -rf conftest.one conftest.two conftest.dir
++
++fi
++ if test "${ac_cv_path_install+set}" = set; then
++ INSTALL=$ac_cv_path_install
++ else
++ # As a last resort, use the slow shell script. Don't cache a
++ # value for INSTALL within a source directory, because that will
++ # break other packages using the cache if that directory is
++ # removed, or if the value is a relative name.
++ INSTALL=$ac_install_sh
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
++$as_echo "$INSTALL" >&6; }
++
++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
++# It thinks the first close brace ends the variable substitution.
++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
++
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
++
++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
++$as_echo_n "checking whether build environment is sane... " >&6; }
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Reject unsafe characters in $srcdir or the absolute working directory
++# name. Accept space and tab only in the latter.
++am_lf='
++'
++case `pwd` in
++ *[\\\"\#\$\&\'\`$am_lf]*)
++ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
++esac
++case $srcdir in
++ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
++ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
++esac
++
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments. Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
++ if test "$*" = "X"; then
++ # -L didn't work.
++ set X `ls -t "$srcdir/configure" conftest.file`
++ fi
++ rm -f conftest.file
++ if test "$*" != "X $srcdir/configure conftest.file" \
++ && test "$*" != "X conftest.file $srcdir/configure"; then
++
++ # If neither matched, then we have a broken ls. This can happen
++ # if, for instance, CONFIG_SHELL is bash and it inherits a
++ # broken ls alias from the environment. This has actually
++ # happened. Such a system could not be considered "sane".
++ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
++alias in your environment" "$LINENO" 5
++ fi
++
++ test "$2" = conftest.file
++ )
++then
++ # Ok.
++ :
++else
++ as_fn_error $? "newly created file is older than distributed files!
++Check your system clock" "$LINENO" 5
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++test "$program_prefix" != NONE &&
++ program_transform_name="s&^&$program_prefix&;$program_transform_name"
++# Use a double $ so make ignores it.
++test "$program_suffix" != NONE &&
++ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
++# Double any \ or $.
++# By default was `s,x,x', remove it if useless.
++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
++
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++
++if test x"${MISSING+set}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
++ *)
++ MISSING="\${SHELL} $am_aux_dir/missing" ;;
++ esac
++fi
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++fi
++
++if test x"${install_sh}" != xset; then
++ case $am_aux_dir in
++ *\ * | *\ *)
++ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
++ *)
++ install_sh="\${SHELL} $am_aux_dir/install-sh"
++ esac
++fi
++
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_STRIP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$STRIP"; then
++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
++$as_echo "$STRIP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++ ac_ct_STRIP=$STRIP
++ # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_STRIP="strip"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
++$as_echo "$ac_ct_STRIP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_STRIP" = x; then
++ STRIP=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ STRIP=$ac_ct_STRIP
++ fi
++else
++ STRIP="$ac_cv_prog_STRIP"
++fi
++
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
++if test -z "$MKDIR_P"; then
++ if ${ac_cv_path_mkdir+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in mkdir gmkdir; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
++ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
++ 'mkdir (GNU coreutils) '* | \
++ 'mkdir (coreutils) '* | \
++ 'mkdir (fileutils) '4.1*)
++ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
++ break 3;;
++ esac
++ done
++ done
++ done
++IFS=$as_save_IFS
++
++fi
++
++ test -d ./--version && rmdir ./--version
++ if test "${ac_cv_path_mkdir+set}" = set; then
++ MKDIR_P="$ac_cv_path_mkdir -p"
++ else
++ # As a last resort, use the slow shell script. Don't cache a
++ # value for MKDIR_P within a source directory, because that will
++ # break other packages using the cache if that directory is
++ # removed, or if the value is a relative name.
++ MKDIR_P="$ac_install_sh -d"
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
++$as_echo "$MKDIR_P" >&6; }
++
++mkdir_p="$MKDIR_P"
++case $mkdir_p in
++ [\\/$]* | ?:[\\/]*) ;;
++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
++esac
++
++for ac_prog in gawk mawk nawk awk
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_AWK+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$AWK"; then
++ ac_cv_prog_AWK="$AWK" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_AWK="$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
++$as_echo "$AWK" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$AWK" && break
++done
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
++set x ${MAKE-make}
++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
++if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat >conftest.make <<\_ACEOF
++SHELL = /bin/sh
++all:
++ @echo '@@@%%%=$(MAKE)=@@@%%%'
++_ACEOF
++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
++case `${MAKE-make} -f conftest.make 2>/dev/null` in
++ *@@@%%%=?*=@@@%%%*)
++ eval ac_cv_prog_make_${ac_make}_set=yes;;
++ *)
++ eval ac_cv_prog_make_${ac_make}_set=no;;
++esac
++rm -f conftest.make
++fi
++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++ SET_MAKE=
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++ SET_MAKE="MAKE=${MAKE-make}"
++fi
++
++rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++ # is not polluted with repeated "-I."
++ am__isrc=' -I$(srcdir)'
++ # test to see if srcdir already configured
++ if test -f $srcdir/config.status; then
++ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
++ fi
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++
++
++# Define the identity of the package.
++ PACKAGE='libmspack'
++ VERSION='0.4alpha'
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE "$PACKAGE"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define VERSION "$VERSION"
++_ACEOF
++
++# Some tools Automake needs.
++
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
++
++
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++
++
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++
++
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++
++
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++# Always define AMTAR for backward compatibility. Yes, it's still used
++# in the wild :-( We should find a proper way to deprecate it ...
++AMTAR='$${TAR-tar}'
++
++am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
++
++
++
++
++
++
++ac_config_headers="$ac_config_headers config.h"
++
++
++# Check whether --enable-silent-rules was given.
++if test "${enable_silent_rules+set}" = set; then :
++ enableval=$enable_silent_rules;
++fi
++
++case $enable_silent_rules in
++yes) AM_DEFAULT_VERBOSITY=0;;
++no) AM_DEFAULT_VERBOSITY=1;;
++*) AM_DEFAULT_VERBOSITY=0;;
++esac
++am_make=${MAKE-make}
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
++$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
++if ${am_cv_make_support_nested_variables+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if $as_echo 'TRUE=$(BAR$(V))
++BAR0=false
++BAR1=true
++V=1
++am__doit:
++ @$(TRUE)
++.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
++ am_cv_make_support_nested_variables=yes
++else
++ am_cv_make_support_nested_variables=no
++fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
++$as_echo "$am_cv_make_support_nested_variables" >&6; }
++if test $am_cv_make_support_nested_variables = yes; then
++ AM_V='$(V)'
++ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
++else
++ AM_V=$AM_DEFAULT_VERBOSITY
++ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
++fi
++AM_BACKSLASH='\'
++
++
++# --enable-debug option
++# Check whether --enable-debug was given.
++if test "${enable_debug+set}" = set; then :
++ enableval=$enable_debug; enable_debug=$enableval
++else
++ enable_debug=no
++fi
++
++if test x$enable_debug = xyes; then
++
++$as_echo "#define DEBUG 1" >>confdefs.h
++
++fi
++ if test x$enable_debug = 'xyes'; then
++ DEBUG_TRUE=
++ DEBUG_FALSE='#'
++else
++ DEBUG_TRUE='#'
++ DEBUG_FALSE=
++fi
++
++
++# Checks for programs.
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_CC="${ac_tool_prefix}gcc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "gcc", so it can be a program name with args.
++set dummy gcc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_CC="gcc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_CC" = x; then
++ CC=""
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ CC=$ac_ct_CC
++ fi
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}cc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_CC="${ac_tool_prefix}cc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ fi
++fi
++if test -z "$CC"; then
++ # Extract the first word of "cc", so it can be a program name with args.
++set dummy cc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++ ac_prog_rejected=no
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
++ ac_prog_rejected=yes
++ continue
++ fi
++ ac_cv_prog_CC="cc"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++if test $ac_prog_rejected = yes; then
++ # We found a bogon in the path, so make sure we never use it.
++ set dummy $ac_cv_prog_CC
++ shift
++ if test $# != 0; then
++ # We chose a different compiler from the bogus one.
++ # However, it has the same basename, so the bogon will be chosen
++ # first if we set CC to just the basename; use the full file name.
++ shift
++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
++ fi
++fi
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ for ac_prog in cl.exe
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$CC" && break
++ done
++fi
++if test -z "$CC"; then
++ ac_ct_CC=$CC
++ for ac_prog in cl.exe
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_CC="$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$ac_ct_CC" && break
++done
++
++ if test "x$ac_ct_CC" = x; then
++ CC=""
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ CC=$ac_ct_CC
++ fi
++fi
++
++fi
++
++
++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "no acceptable C compiler found in \$PATH
++See \`config.log' for more details" "$LINENO" 5; }
++
++# Provide some information about the compiler.
++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
++set X $ac_compile
++ac_compiler=$2
++for ac_option in --version -v -V -qversion; do
++ { { ac_try="$ac_compiler $ac_option >&5"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
++ ac_status=$?
++ if test -s conftest.err; then
++ sed '10a\
++... rest of stderr output deleted ...
++ 10q' conftest.err >conftest.er1
++ cat conftest.er1 >&5
++ fi
++ rm -f conftest.er1 conftest.err
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++done
++
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
++# Try to create an executable without -o first, disregard a.out.
++# It will help us diagnose broken compilers, and finding out an intuition
++# of exeext.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
++$as_echo_n "checking whether the C compiler works... " >&6; }
++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++
++# The possible output files:
++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
++
++ac_rmfiles=
++for ac_file in $ac_files
++do
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
++ esac
++done
++rm -f $ac_rmfiles
++
++if { { ac_try="$ac_link_default"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link_default") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
++# in a Makefile. We should not override ac_cv_exeext if it was cached,
++# so that the user can short-circuit this test for compilers unknown to
++# Autoconf.
++for ac_file in $ac_files ''
++do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
++ ;;
++ [ab].out )
++ # We found the default executable, but exeext='' is most
++ # certainly right.
++ break;;
++ *.* )
++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
++ then :; else
++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ fi
++ # We set ac_cv_exeext here because the later test for it is not
++ # safe: cross compilers may not add the suffix if given an `-o'
++ # argument, so we may need to know it at that point already.
++ # Even if this section looks crufty: it has the advantage of
++ # actually working.
++ break;;
++ * )
++ break;;
++ esac
++done
++test "$ac_cv_exeext" = no && ac_cv_exeext=
++
++else
++ ac_file=''
++fi
++if test -z "$ac_file"; then :
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++$as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error 77 "C compiler cannot create executables
++See \`config.log' for more details" "$LINENO" 5; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
++$as_echo_n "checking for C compiler default output file name... " >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
++$as_echo "$ac_file" >&6; }
++ac_exeext=$ac_cv_exeext
++
++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
++$as_echo_n "checking for suffix of executables... " >&6; }
++if { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
++ # If both `conftest.exe' and `conftest' are `present' (well, observable)
++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
++# work properly (i.e., refer to `conftest.exe'), while it won't with
++# `rm'.
++for ac_file in conftest.exe conftest conftest.*; do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ break;;
++ * ) break;;
++ esac
++done
++else
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details" "$LINENO" 5; }
++fi
++rm -f conftest conftest$ac_cv_exeext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
++$as_echo "$ac_cv_exeext" >&6; }
++
++rm -f conftest.$ac_ext
++EXEEXT=$ac_cv_exeext
++ac_exeext=$EXEEXT
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdio.h>
++int
++main ()
++{
++FILE *f = fopen ("conftest.out", "w");
++ return ferror (f) || fclose (f) != 0;
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files="$ac_clean_files conftest.out"
++# Check that the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
++$as_echo_n "checking whether we are cross compiling... " >&6; }
++if test "$cross_compiling" != yes; then
++ { { ac_try="$ac_link"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_link") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if { ac_try='./conftest$ac_cv_exeext'
++ { { case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_try") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; }; then
++ cross_compiling=no
++ else
++ if test "$cross_compiling" = maybe; then
++ cross_compiling=yes
++ else
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details" "$LINENO" 5; }
++ fi
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
++$as_echo "$cross_compiling" >&6; }
++
++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
++$as_echo_n "checking for suffix of object files... " >&6; }
++if ${ac_cv_objext+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.o conftest.obj
++if { { ac_try="$ac_compile"
++case "(($ac_try" in
++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++ *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++ (eval "$ac_compile") 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then :
++ for ac_file in conftest.o conftest.obj conftest.*; do
++ test -f "$ac_file" || continue;
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
++ break;;
++ esac
++done
++else
++ $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot compute suffix of object files: cannot compile
++See \`config.log' for more details" "$LINENO" 5; }
++fi
++rm -f conftest.$ac_cv_objext conftest.$ac_ext
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
++$as_echo "$ac_cv_objext" >&6; }
++OBJEXT=$ac_cv_objext
++ac_objext=$OBJEXT
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
++if ${ac_cv_c_compiler_gnu+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++#ifndef __GNUC__
++ choke me
++#endif
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_compiler_gnu=yes
++else
++ ac_compiler_gnu=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_cv_c_compiler_gnu=$ac_compiler_gnu
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
++$as_echo "$ac_cv_c_compiler_gnu" >&6; }
++if test $ac_compiler_gnu = yes; then
++ GCC=yes
++else
++ GCC=
++fi
++ac_test_CFLAGS=${CFLAGS+set}
++ac_save_CFLAGS=$CFLAGS
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
++$as_echo_n "checking whether $CC accepts -g... " >&6; }
++if ${ac_cv_prog_cc_g+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_save_c_werror_flag=$ac_c_werror_flag
++ ac_c_werror_flag=yes
++ ac_cv_prog_cc_g=no
++ CFLAGS="-g"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_prog_cc_g=yes
++else
++ CFLAGS=""
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++
++else
++ ac_c_werror_flag=$ac_save_c_werror_flag
++ CFLAGS="-g"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_prog_cc_g=yes
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ac_c_werror_flag=$ac_save_c_werror_flag
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
++$as_echo "$ac_cv_prog_cc_g" >&6; }
++if test "$ac_test_CFLAGS" = set; then
++ CFLAGS=$ac_save_CFLAGS
++elif test $ac_cv_prog_cc_g = yes; then
++ if test "$GCC" = yes; then
++ CFLAGS="-g -O2"
++ else
++ CFLAGS="-g"
++ fi
++else
++ if test "$GCC" = yes; then
++ CFLAGS="-O2"
++ else
++ CFLAGS=
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
++if ${ac_cv_prog_cc_c89+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_cv_prog_cc_c89=no
++ac_save_CC=$CC
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdarg.h>
++#include <stdio.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
++struct buf { int x; };
++FILE * (*rcsopen) (struct buf *, struct stat *, int);
++static char *e (p, i)
++ char **p;
++ int i;
++{
++ return p[i];
++}
++static char *f (char * (*g) (char **, int), char **p, ...)
++{
++ char *s;
++ va_list v;
++ va_start (v,p);
++ s = g (p, va_arg (v,int));
++ va_end (v);
++ return s;
++}
++
++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
++ function prototypes and stuff, but not '\xHH' hex character constants.
++ These don't provoke an error unfortunately, instead are silently treated
++ as 'x'. The following induces an error, until -std is added to get
++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
++ array size at least. It's necessary to write '\x00'==0 to get something
++ that's true only with -std. */
++int osf4_cc_array ['\x00' == 0 ? 1 : -1];
++
++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
++ inside strings and character constants. */
++#define FOO(x) 'x'
++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
++
++int test (int i, double x);
++struct s1 {int (*f) (int a);};
++struct s2 {int (*f) (double a);};
++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
++int argc;
++char **argv;
++int
++main ()
++{
++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
++ ;
++ return 0;
++}
++_ACEOF
++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
++do
++ CC="$ac_save_CC $ac_arg"
++ if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_prog_cc_c89=$ac_arg
++fi
++rm -f core conftest.err conftest.$ac_objext
++ test "x$ac_cv_prog_cc_c89" != "xno" && break
++done
++rm -f conftest.$ac_ext
++CC=$ac_save_CC
++
++fi
++# AC_CACHE_VAL
++case "x$ac_cv_prog_cc_c89" in
++ x)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
++$as_echo "none needed" >&6; } ;;
++ xno)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
++$as_echo "unsupported" >&6; } ;;
++ *)
++ CC="$CC $ac_cv_prog_cc_c89"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
++esac
++if test "x$ac_cv_prog_cc_c89" != xno; then :
++
++fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++DEPDIR="${am__leading_dot}deps"
++
++ac_config_commands="$ac_config_commands depfiles"
++
++
++am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo this is the am__doit target
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
++$as_echo_n "checking for style of include used by $am_make... " >&6; }
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# Ignore all kinds of additional output from `make'.
++case `$am_make -s -f confmf 2> /dev/null` in #(
++*the\ am__doit\ target*)
++ am__include=include
++ am__quote=
++ _am_result=GNU
++ ;;
++esac
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ case `$am_make -s -f confmf 2> /dev/null` in #(
++ *the\ am__doit\ target*)
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ ;;
++ esac
++fi
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
++$as_echo "$_am_result" >&6; }
++rm -f confinc confmf
++
++# Check whether --enable-dependency-tracking was given.
++if test "${enable_dependency_tracking+set}" = set; then :
++ enableval=$enable_dependency_tracking;
++fi
++
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++ am__nodep='_no'
++fi
++ if test "x$enable_dependency_tracking" != xno; then
++ AMDEP_TRUE=
++ AMDEP_FALSE='#'
++else
++ AMDEP_TRUE='#'
++ AMDEP_FALSE=
++fi
++
++
++
++depcc="$CC" am_compiler_list=
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
++$as_echo_n "checking dependency style of $depcc... " >&6; }
++if ${am_cv_CC_dependencies_compiler_type+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ rm -rf conftest.dir
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_CC_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++ fi
++ am__universal=false
++ case " $depcc " in #(
++ *\ -arch\ *\ -arch\ *) am__universal=true ;;
++ esac
++
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this. Also, some Intel
++ # versions had trouble with output in subdirs
++ am__obj=sub/conftest.${OBJEXT-o}
++ am__minus_obj="-o $am__obj"
++ case $depmode in
++ gcc)
++ # This depmode causes a compiler race in universal mode.
++ test "$am__universal" = false || continue
++ ;;
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
++ # This compiler won't grok `-c -o', but also, the minuso test has
++ # not run yet. These depmodes are late enough in the game, and
++ # so weak that their functioning should not be impacted.
++ am__obj=conftest.${OBJEXT-o}
++ am__minus_obj=
++ ;;
++ none) break ;;
++ esac
++ if depmode=$depmode \
++ source=sub/conftest.c object=$am__obj \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_CC_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_CC_dependencies_compiler_type=none
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
++
++ if
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
++ am__fastdepCC_TRUE=
++ am__fastdepCC_FALSE='#'
++else
++ am__fastdepCC_TRUE='#'
++ am__fastdepCC_FALSE=
++fi
++
++
++ if test x$GCC = 'xyes'; then
++ GCC_TRUE=
++ GCC_FALSE='#'
++else
++ GCC_TRUE='#'
++ GCC_FALSE=
++fi
++
++
++case `pwd` in
++ *\ * | *\ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
++$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
++esac
++
++
++
++macro_version='2.4.2'
++macro_revision='1.3337'
++
++
++
++
++
++
++
++
++
++
++
++
++
++ltmain="$ac_aux_dir/ltmain.sh"
++
++# Make sure we can run config.sub.
++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
++ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
++$as_echo_n "checking build system type... " >&6; }
++if ${ac_cv_build+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_build_alias=$build_alias
++test "x$ac_build_alias" = x &&
++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
++test "x$ac_build_alias" = x &&
++ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
++$as_echo "$ac_cv_build" >&6; }
++case $ac_cv_build in
++*-*-*) ;;
++*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
++esac
++build=$ac_cv_build
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_build
++shift
++build_cpu=$1
++build_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++build_os=$*
++IFS=$ac_save_IFS
++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
++$as_echo_n "checking host system type... " >&6; }
++if ${ac_cv_host+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test "x$host_alias" = x; then
++ ac_cv_host=$ac_cv_build
++else
++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
++ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
++$as_echo "$ac_cv_host" >&6; }
++case $ac_cv_host in
++*-*-*) ;;
++*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
++esac
++host=$ac_cv_host
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_host
++shift
++host_cpu=$1
++host_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++host_os=$*
++IFS=$ac_save_IFS
++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
++
++
++# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\(["`\\]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++
++ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
++$as_echo_n "checking how to print strings... " >&6; }
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='printf %s\n'
++else
++ # Use this function as a fallback that always works.
++ func_fallback_echo ()
++ {
++ eval 'cat <<_LTECHO_EOF
++$1
++_LTECHO_EOF'
++ }
++ ECHO='func_fallback_echo'
++fi
++
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++ $ECHO ""
++}
++
++case "$ECHO" in
++ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
++$as_echo "printf" >&6; } ;;
++ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
++$as_echo "print -r" >&6; } ;;
++ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
++$as_echo "cat" >&6; } ;;
++esac
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
++$as_echo_n "checking for a sed that does not truncate output... " >&6; }
++if ${ac_cv_path_SED+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
++ for ac_i in 1 2 3 4 5 6 7; do
++ ac_script="$ac_script$as_nl$ac_script"
++ done
++ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
++ { ac_script=; unset ac_script;}
++ if test -z "$SED"; then
++ ac_path_SED_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
++# Check for GNU ac_path_SED and select it if it is found.
++ # Check for GNU $ac_path_SED
++case `"$ac_path_SED" --version 2>&1` in
++*GNU*)
++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo '' >> "conftest.nl"
++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_SED_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_SED="$ac_path_SED"
++ ac_path_SED_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_SED_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_SED"; then
++ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
++ fi
++else
++ ac_cv_path_SED=$SED
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
++$as_echo "$ac_cv_path_SED" >&6; }
++ SED="$ac_cv_path_SED"
++ rm -f conftest.sed
++
++test -z "$SED" && SED=sed
++Xsed="$SED -e 1s/^X//"
++
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
++$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
++if ${ac_cv_path_GREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -z "$GREP"; then
++ ac_path_GREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in grep ggrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
++# Check for GNU ac_path_GREP and select it if it is found.
++ # Check for GNU $ac_path_GREP
++case `"$ac_path_GREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'GREP' >> "conftest.nl"
++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_GREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_GREP="$ac_path_GREP"
++ ac_path_GREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_GREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_GREP"; then
++ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
++else
++ ac_cv_path_GREP=$GREP
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
++$as_echo "$ac_cv_path_GREP" >&6; }
++ GREP="$ac_cv_path_GREP"
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
++$as_echo_n "checking for egrep... " >&6; }
++if ${ac_cv_path_EGREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
++ then ac_cv_path_EGREP="$GREP -E"
++ else
++ if test -z "$EGREP"; then
++ ac_path_EGREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in egrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
++# Check for GNU ac_path_EGREP and select it if it is found.
++ # Check for GNU $ac_path_EGREP
++case `"$ac_path_EGREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'EGREP' >> "conftest.nl"
++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_EGREP="$ac_path_EGREP"
++ ac_path_EGREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_EGREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_EGREP"; then
++ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
++else
++ ac_cv_path_EGREP=$EGREP
++fi
++
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
++$as_echo "$ac_cv_path_EGREP" >&6; }
++ EGREP="$ac_cv_path_EGREP"
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
++$as_echo_n "checking for fgrep... " >&6; }
++if ${ac_cv_path_FGREP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
++ then ac_cv_path_FGREP="$GREP -F"
++ else
++ if test -z "$FGREP"; then
++ ac_path_FGREP_found=false
++ # Loop through the user's path and test for each of PROGNAME-LIST
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in fgrep; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
++# Check for GNU ac_path_FGREP and select it if it is found.
++ # Check for GNU $ac_path_FGREP
++case `"$ac_path_FGREP" --version 2>&1` in
++*GNU*)
++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
++*)
++ ac_count=0
++ $as_echo_n 0123456789 >"conftest.in"
++ while :
++ do
++ cat "conftest.in" "conftest.in" >"conftest.tmp"
++ mv "conftest.tmp" "conftest.in"
++ cp "conftest.in" "conftest.nl"
++ $as_echo 'FGREP' >> "conftest.nl"
++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++ as_fn_arith $ac_count + 1 && ac_count=$as_val
++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
++ # Best one so far, save it but keep looking for a better one
++ ac_cv_path_FGREP="$ac_path_FGREP"
++ ac_path_FGREP_max=$ac_count
++ fi
++ # 10*(2^10) chars as input seems more than enough
++ test $ac_count -gt 10 && break
++ done
++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
++
++ $ac_path_FGREP_found && break 3
++ done
++ done
++ done
++IFS=$as_save_IFS
++ if test -z "$ac_cv_path_FGREP"; then
++ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++ fi
++else
++ ac_cv_path_FGREP=$FGREP
++fi
++
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
++$as_echo "$ac_cv_path_FGREP" >&6; }
++ FGREP="$ac_cv_path_FGREP"
++
++
++test -z "$GREP" && GREP=grep
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++# Check whether --with-gnu-ld was given.
++if test "${with_gnu_ld+set}" = set; then :
++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
++else
++ with_gnu_ld=no
++fi
++
++ac_prog=ld
++if test "$GCC" = yes; then
++ # Check if gcc -print-prog-name=ld gives a path.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
++$as_echo_n "checking for ld used by $CC... " >&6; }
++ case $host in
++ *-*-mingw*)
++ # gcc leaves a trailing carriage return which upsets mingw
++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++ *)
++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++ esac
++ case $ac_prog in
++ # Accept absolute paths.
++ [\\/]* | ?:[\\/]*)
++ re_direlt='/[^/][^/]*/\.\./'
++ # Canonicalize the pathname of ld
++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
++ done
++ test -z "$LD" && LD="$ac_prog"
++ ;;
++ "")
++ # If it fails, then pretend we aren't using GCC.
++ ac_prog=ld
++ ;;
++ *)
++ # If it is relative, then search for the first ld in PATH.
++ with_gnu_ld=unknown
++ ;;
++ esac
++elif test "$with_gnu_ld" = yes; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
++$as_echo_n "checking for GNU ld... " >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
++$as_echo_n "checking for non-GNU ld... " >&6; }
++fi
++if ${lt_cv_path_LD+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -z "$LD"; then
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++ lt_cv_path_LD="$ac_dir/$ac_prog"
++ # Check to see if the program is GNU ld. I'd rather use --version,
++ # but apparently some variants of GNU ld only accept -v.
++ # Break only if it was the GNU/non-GNU ld that we prefer.
++ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++ *GNU* | *'with BFD'*)
++ test "$with_gnu_ld" != no && break
++ ;;
++ *)
++ test "$with_gnu_ld" != yes && break
++ ;;
++ esac
++ fi
++ done
++ IFS="$lt_save_ifs"
++else
++ lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi
++fi
++
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
++$as_echo "$LD" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
++$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
++if ${lt_cv_prog_gnu_ld+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ # I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++ lt_cv_prog_gnu_ld=yes
++ ;;
++*)
++ lt_cv_prog_gnu_ld=no
++ ;;
++esac
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
++$as_echo "$lt_cv_prog_gnu_ld" >&6; }
++with_gnu_ld=$lt_cv_prog_gnu_ld
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
++$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
++if ${lt_cv_path_NM+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$NM"; then
++ # Let the user override the test.
++ lt_cv_path_NM="$NM"
++else
++ lt_nm_to_check="${ac_tool_prefix}nm"
++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++ lt_nm_to_check="$lt_nm_to_check nm"
++ fi
++ for lt_tmp_nm in $lt_nm_to_check; do
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ tmp_nm="$ac_dir/$lt_tmp_nm"
++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++ # Check to see if the nm accepts a BSD-compat flag.
++ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
++ # nm: unknown option "B" ignored
++ # Tru64's nm complains that /dev/null is an invalid object file
++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++ */dev/null* | *'Invalid file or object type'*)
++ lt_cv_path_NM="$tmp_nm -B"
++ break
++ ;;
++ *)
++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++ */dev/null*)
++ lt_cv_path_NM="$tmp_nm -p"
++ break
++ ;;
++ *)
++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++ continue # so that we can try to find one that supports BSD flags
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ done
++ IFS="$lt_save_ifs"
++ done
++ : ${lt_cv_path_NM=no}
++fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
++$as_echo "$lt_cv_path_NM" >&6; }
++if test "$lt_cv_path_NM" != "no"; then
++ NM="$lt_cv_path_NM"
++else
++ # Didn't find any BSD compatible name lister, look for dumpbin.
++ if test -n "$DUMPBIN"; then :
++ # Let the user override the test.
++ else
++ if test -n "$ac_tool_prefix"; then
++ for ac_prog in dumpbin "link -dump"
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_DUMPBIN+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$DUMPBIN"; then
++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++DUMPBIN=$ac_cv_prog_DUMPBIN
++if test -n "$DUMPBIN"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
++$as_echo "$DUMPBIN" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$DUMPBIN" && break
++ done
++fi
++if test -z "$DUMPBIN"; then
++ ac_ct_DUMPBIN=$DUMPBIN
++ for ac_prog in dumpbin "link -dump"
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_DUMPBIN"; then
++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
++if test -n "$ac_ct_DUMPBIN"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
++$as_echo "$ac_ct_DUMPBIN" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$ac_ct_DUMPBIN" && break
++done
++
++ if test "x$ac_ct_DUMPBIN" = x; then
++ DUMPBIN=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ DUMPBIN=$ac_ct_DUMPBIN
++ fi
++fi
++
++ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++ *COFF*)
++ DUMPBIN="$DUMPBIN -symbols"
++ ;;
++ *)
++ DUMPBIN=:
++ ;;
++ esac
++ fi
++
++ if test "$DUMPBIN" != ":"; then
++ NM="$DUMPBIN"
++ fi
++fi
++test -z "$NM" && NM=nm
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
++$as_echo_n "checking the name lister ($NM) interface... " >&6; }
++if ${lt_cv_nm_interface+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_nm_interface="BSD nm"
++ echo "int some_variable = 0;" > conftest.$ac_ext
++ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
++ (eval "$ac_compile" 2>conftest.err)
++ cat conftest.err >&5
++ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
++ cat conftest.err >&5
++ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
++ cat conftest.out >&5
++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
++ lt_cv_nm_interface="MS dumpbin"
++ fi
++ rm -f conftest*
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
++$as_echo "$lt_cv_nm_interface" >&6; }
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
++$as_echo_n "checking whether ln -s works... " >&6; }
++LN_S=$as_ln_s
++if test "$LN_S" = "ln -s"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
++$as_echo "no, using $LN_S" >&6; }
++fi
++
++# find the maximum length of command line arguments
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
++$as_echo_n "checking the maximum length of command line arguments... " >&6; }
++if ${lt_cv_sys_max_cmd_len+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ i=0
++ teststring="ABCD"
++
++ case $build_os in
++ msdosdjgpp*)
++ # On DJGPP, this test can blow up pretty badly due to problems in libc
++ # (any single argument exceeding 2000 bytes causes a buffer overrun
++ # during glob expansion). Even if it were fixed, the result of this
++ # check would be larger than it should be.
++ lt_cv_sys_max_cmd_len=12288; # 12K is about right
++ ;;
++
++ gnu*)
++ # Under GNU Hurd, this test is not required because there is
++ # no limit to the length of command line arguments.
++ # Libtool will interpret -1 as no limit whatsoever
++ lt_cv_sys_max_cmd_len=-1;
++ ;;
++
++ cygwin* | mingw* | cegcc*)
++ # On Win9x/ME, this test blows up -- it succeeds, but takes
++ # about 5 minutes as the teststring grows exponentially.
++ # Worse, since 9x/ME are not pre-emptively multitasking,
++ # you end up with a "frozen" computer, even though with patience
++ # the test eventually succeeds (with a max line length of 256k).
++ # Instead, let's just punt: use the minimum linelength reported by
++ # all of the supported platforms: 8192 (on NT/2K/XP).
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ mint*)
++ # On MiNT this can take a long time and run out of memory.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++ # This has been around since 386BSD, at least. Likely further.
++ if test -x /sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++ elif test -x /usr/sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++ else
++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ fi
++ # And add a safety zone
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ ;;
++
++ interix*)
++ # We know the value 262144 and hardcode it with a safety zone (like BSD)
++ lt_cv_sys_max_cmd_len=196608
++ ;;
++
++ os2*)
++ # The test takes a long time on OS/2.
++ lt_cv_sys_max_cmd_len=8192
++ ;;
++
++ osf*)
++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++ # nice to cause kernel panics so lets avoid the loop below.
++ # First set a reasonable default.
++ lt_cv_sys_max_cmd_len=16384
++ #
++ if test -x /sbin/sysconfig; then
++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++ *1*) lt_cv_sys_max_cmd_len=-1 ;;
++ esac
++ fi
++ ;;
++ sco3.2v5*)
++ lt_cv_sys_max_cmd_len=102400
++ ;;
++ sysv5* | sco5v6* | sysv4.2uw2*)
++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++ if test -n "$kargmax"; then
++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
++ else
++ lt_cv_sys_max_cmd_len=32768
++ fi
++ ;;
++ *)
++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++ if test -n "$lt_cv_sys_max_cmd_len"; then
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ else
++ # Make teststring a little bigger before we do anything with it.
++ # a 1K string should be a reasonable start.
++ for i in 1 2 3 4 5 6 7 8 ; do
++ teststring=$teststring$teststring
++ done
++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++ # If test is not a shell built-in, we'll probably end up computing a
++ # maximum length that is only half of the actual maximum length, but
++ # we can't tell.
++ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
++ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
++ test $i != 17 # 1/2 MB should be enough
++ do
++ i=`expr $i + 1`
++ teststring=$teststring$teststring
++ done
++ # Only check the string length outside the loop.
++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
++ teststring=
++ # Add a significant safety factor because C++ compilers can tack on
++ # massive amounts of additional arguments before passing them to the
++ # linker. It appears as though 1/2 is a usable value.
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ fi
++ ;;
++ esac
++
++fi
++
++if test -n $lt_cv_sys_max_cmd_len ; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
++$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
++$as_echo "none" >&6; }
++fi
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++
++
++
++
++
++: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
++$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
++# Try some XSI features
++xsi_shell=no
++( _lt_dummy="a/b/c"
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
++ && eval 'test $(( 1 + 1 )) -eq 2 \
++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
++ && xsi_shell=yes
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
++$as_echo "$xsi_shell" >&6; }
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
++$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
++lt_shell_append=no
++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
++ >/dev/null 2>&1 \
++ && lt_shell_append=yes
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
++$as_echo "$lt_shell_append" >&6; }
++
++
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ lt_unset=unset
++else
++ lt_unset=false
++fi
++
++
++
++
++
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++ lt_SP2NL='tr \040 \012'
++ lt_NL2SP='tr \015\012 \040\040'
++ ;;
++ *) # EBCDIC based system
++ lt_SP2NL='tr \100 \n'
++ lt_NL2SP='tr \r\n \100\100'
++ ;;
++esac
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
++$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
++if ${lt_cv_to_host_file_cmd+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
++ ;;
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
++ ;;
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++
++fi
++
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
++$as_echo "$lt_cv_to_host_file_cmd" >&6; }
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
++$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
++if ${lt_cv_to_tool_file_cmd+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ #assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
++
++fi
++
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
++$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
++$as_echo_n "checking for $LD option to reload object files... " >&6; }
++if ${lt_cv_ld_reload_flag+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ld_reload_flag='-r'
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
++$as_echo "$lt_cv_ld_reload_flag" >&6; }
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
++ darwin*)
++ if test "$GCC" = yes; then
++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++ else
++ reload_cmds='$LD$reload_flag -o $output$reload_objs'
++ fi
++ ;;
++esac
++
++
++
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
++set dummy ${ac_tool_prefix}objdump; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_OBJDUMP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$OBJDUMP"; then
++ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++OBJDUMP=$ac_cv_prog_OBJDUMP
++if test -n "$OBJDUMP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
++$as_echo "$OBJDUMP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_OBJDUMP"; then
++ ac_ct_OBJDUMP=$OBJDUMP
++ # Extract the first word of "objdump", so it can be a program name with args.
++set dummy objdump; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_OBJDUMP"; then
++ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_OBJDUMP="objdump"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
++if test -n "$ac_ct_OBJDUMP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
++$as_echo "$ac_ct_OBJDUMP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_OBJDUMP" = x; then
++ OBJDUMP="false"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ OBJDUMP=$ac_ct_OBJDUMP
++ fi
++else
++ OBJDUMP="$ac_cv_prog_OBJDUMP"
++fi
++
++test -z "$OBJDUMP" && OBJDUMP=objdump
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
++$as_echo_n "checking how to recognize dependent libraries... " >&6; }
++if ${lt_cv_deplibs_check_method+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix[4-9]*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++beos*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++bsdi[45]*)
++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
++ lt_cv_file_magic_cmd='/usr/bin/file -L'
++ lt_cv_file_magic_test_file=/shlib/libc.so
++ ;;
++
++cygwin*)
++ # func_win32_libid is a shell function defined in ltmain.sh
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ ;;
++
++mingw* | pw32*)
++ # Base MSYS/MinGW do not provide the 'file' command needed by
++ # func_win32_libid shell function, so use a weaker test based on 'objdump',
++ # unless we find 'file', for example because we are cross-compiling.
++ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ else
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
++ fi
++ ;;
++
++cegcc*)
++ # use the weaker test based on 'objdump'. See mingw*.
++ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
++ ;;
++
++darwin* | rhapsody*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++freebsd* | dragonfly*)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++ case $host_cpu in
++ i*86 )
++ # Not sure whether the presence of OpenBSD here was a mistake.
++ # Let's accept both of them until this is cleared up.
++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++ ;;
++ esac
++ else
++ lt_cv_deplibs_check_method=pass_all
++ fi
++ ;;
++
++gnu*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++haiku*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++hpux10.20* | hpux11*)
++ lt_cv_file_magic_cmd=/usr/bin/file
++ case $host_cpu in
++ ia64*)
++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++ ;;
++ hppa*64*)
++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++ ;;
++ *)
++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
++ lt_cv_file_magic_test_file=/usr/lib/libc.sl
++ ;;
++ esac
++ ;;
++
++interix[3-9]*)
++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
++ ;;
++
++irix5* | irix6* | nonstopux*)
++ case $LD in
++ *-32|*"-32 ") libmagic=32-bit;;
++ *-n32|*"-n32 ") libmagic=N32;;
++ *-64|*"-64 ") libmagic=64-bit;;
++ *) libmagic=never-match;;
++ esac
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++# This must be glibc/ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
++ else
++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
++ fi
++ ;;
++
++newos6*)
++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=/usr/lib/libnls.so
++ ;;
++
++*nto* | *qnx*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++openbsd*)
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
++ else
++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
++ fi
++ ;;
++
++osf3* | osf4* | osf5*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++rdos*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++solaris*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++sysv4 | sysv4.3*)
++ case $host_vendor in
++ motorola)
++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++ ;;
++ ncr)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ sequent)
++ lt_cv_file_magic_cmd='/bin/file'
++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
++ ;;
++ sni)
++ lt_cv_file_magic_cmd='/bin/file'
++ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
++ lt_cv_file_magic_test_file=/lib/libc.so
++ ;;
++ siemens)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ pc)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ esac
++ ;;
++
++tpf*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++esac
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
++$as_echo "$lt_cv_deplibs_check_method" >&6; }
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_DLLTOOL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$DLLTOOL"; then
++ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
++$as_echo "$DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_DLLTOOL"; then
++ ac_ct_DLLTOOL=$DLLTOOL
++ # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_DLLTOOL"; then
++ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
++$as_echo "$ac_ct_DLLTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_DLLTOOL" = x; then
++ DLLTOOL="false"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ DLLTOOL=$ac_ct_DLLTOOL
++ fi
++else
++ DLLTOOL="$ac_cv_prog_DLLTOOL"
++fi
++
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
++$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
++if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
++$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++ for ac_prog in ar
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_AR+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$AR"; then
++ ac_cv_prog_AR="$AR" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++AR=$ac_cv_prog_AR
++if test -n "$AR"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
++$as_echo "$AR" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$AR" && break
++ done
++fi
++if test -z "$AR"; then
++ ac_ct_AR=$AR
++ for ac_prog in ar
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_AR+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_AR"; then
++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_AR="$ac_prog"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_AR=$ac_cv_prog_ac_ct_AR
++if test -n "$ac_ct_AR"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
++$as_echo "$ac_ct_AR" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ test -n "$ac_ct_AR" && break
++done
++
++ if test "x$ac_ct_AR" = x; then
++ AR="false"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ AR=$ac_ct_AR
++ fi
++fi
++
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
++$as_echo_n "checking for archiver @FILE support... " >&6; }
++if ${lt_cv_ar_at_file+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ar_at_file=no
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
++ (eval $lt_ar_try) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
++$as_echo "$lt_cv_ar_at_file" >&6; }
++
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
++
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_STRIP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$STRIP"; then
++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
++$as_echo "$STRIP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++ ac_ct_STRIP=$STRIP
++ # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_STRIP="strip"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
++$as_echo "$ac_ct_STRIP" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_STRIP" = x; then
++ STRIP=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ STRIP=$ac_ct_STRIP
++ fi
++else
++ STRIP="$ac_cv_prog_STRIP"
++fi
++
++test -z "$STRIP" && STRIP=:
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_RANLIB+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$RANLIB"; then
++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++RANLIB=$ac_cv_prog_RANLIB
++if test -n "$RANLIB"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
++$as_echo "$RANLIB" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_RANLIB"; then
++ ac_ct_RANLIB=$RANLIB
++ # Extract the first word of "ranlib", so it can be a program name with args.
++set dummy ranlib; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_RANLIB"; then
++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_RANLIB="ranlib"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
++$as_echo "$ac_ct_RANLIB" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_RANLIB" = x; then
++ RANLIB=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ RANLIB=$ac_ct_RANLIB
++ fi
++else
++ RANLIB="$ac_cv_prog_RANLIB"
++fi
++
++test -z "$RANLIB" && RANLIB=:
++
++
++
++
++
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
++ ;;
++ *)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
++ ;;
++ esac
++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
++fi
++
++case $host_os in
++ darwin*)
++ lock_old_archive_extraction=yes ;;
++ *)
++ lock_old_archive_extraction=no ;;
++esac
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
++$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
++if ${lt_cv_sys_global_symbol_pipe+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix. What could be older than Ultrix?!! ;)]
++
++# Character class describing NM global symbol codes.
++symcode='[BCDEGRST]'
++
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
++
++# Define system-specific variables.
++case $host_os in
++aix*)
++ symcode='[BCDT]'
++ ;;
++cygwin* | mingw* | pw32* | cegcc*)
++ symcode='[ABCDGISTW]'
++ ;;
++hpux*)
++ if test "$host_cpu" = ia64; then
++ symcode='[ABCDEGRST]'
++ fi
++ ;;
++irix* | nonstopux*)
++ symcode='[BCDEGRST]'
++ ;;
++osf*)
++ symcode='[BCDEGQRST]'
++ ;;
++solaris*)
++ symcode='[BDRT]'
++ ;;
++sco3.2v5*)
++ symcode='[DT]'
++ ;;
++sysv4.2uw2*)
++ symcode='[DT]'
++ ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++ symcode='[ABDT]'
++ ;;
++sysv4)
++ symcode='[DFNSTU]'
++ ;;
++esac
++
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++ symcode='[ABCDGIRSTW]' ;;
++esac
++
++# Transform an extracted symbol line into a proper C declaration.
++# Some systems (esp. on ia64) link data and code symbols differently,
++# so use this general approach.
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++ ;;
++esac
++
++# Try without a prefix underscore, then with it.
++for ac_symprfx in "" "_"; do
++
++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++ symxfrm="\\1 $ac_symprfx\\2 \\2"
++
++ # Write the raw and C identifiers.
++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ # Fake it for dumpbin and say T for any non-static function
++ # and D for any global variable.
++ # Also find C++ and __fastcall symbols from MSVC++,
++ # which start with @ or ?.
++ lt_cv_sys_global_symbol_pipe="$AWK '"\
++" {last_section=section; section=\$ 3};"\
++" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
++" \$ 0!~/External *\|/{next};"\
++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
++" {if(hide[section]) next};"\
++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
++" s[1]~/^[@?]/{print s[1], s[1]; next};"\
++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
++" ' prfx=^$ac_symprfx"
++ else
++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
++
++ # Check to see that the pipe works correctly.
++ pipe_works=no
++
++ rm -f conftest*
++ cat > conftest.$ac_ext <<_LT_EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(void);
++void nm_test_func(void){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++_LT_EOF
++
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
++ # Now try to grab the symbols.
++ nlist=conftest.nm
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
++ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s "$nlist"; then
++ # Try sorting and uniquifying the output.
++ if sort "$nlist" | uniq > "$nlist"T; then
++ mv -f "$nlist"T "$nlist"
++ else
++ rm -f "$nlist"T
++ fi
++
++ # Make sure that we snagged all the symbols we need.
++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
++ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++_LT_EOF
++ # Now generate the symbol file.
++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
++
++ cat <<_LT_EOF >> conftest.$ac_ext
++
++/* The mapping between symbol names and symbols. */
++LT_DLSYM_CONST struct {
++ const char *name;
++ void *address;
++}
++lt__PROGRAM__LTX_preloaded_symbols[] =
++{
++ { "@PROGRAM@", (void *) 0 },
++_LT_EOF
++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
++ cat <<\_LT_EOF >> conftest.$ac_ext
++ {0, (void *) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++ return lt__PROGRAM__LTX_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++_LT_EOF
++ # Now try linking the two files.
++ mv conftest.$ac_objext conftstm.$ac_objext
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
++ LIBS="conftstm.$ac_objext"
++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
++ pipe_works=yes
++ fi
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
++ else
++ echo "cannot find nm_test_func in $nlist" >&5
++ fi
++ else
++ echo "cannot find nm_test_var in $nlist" >&5
++ fi
++ else
++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
++ fi
++ else
++ echo "$progname: failed program was:" >&5
++ cat conftest.$ac_ext >&5
++ fi
++ rm -rf conftest* conftst*
++
++ # Do not use the global_symbol_pipe unless it works.
++ if test "$pipe_works" = yes; then
++ break
++ else
++ lt_cv_sys_global_symbol_pipe=
++ fi
++done
++
++fi
++
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++ lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
++$as_echo "failed" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
++$as_echo "ok" >&6; }
++fi
++
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
++$as_echo_n "checking for sysroot... " >&6; }
++
++# Check whether --with-sysroot was given.
++if test "${with_sysroot+set}" = set; then :
++ withval=$with_sysroot;
++else
++ with_sysroot=no
++fi
++
++
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
++$as_echo "${with_sysroot}" >&6; }
++ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
++ ;;
++esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
++$as_echo "${lt_sysroot:-no}" >&6; }
++
++
++
++
++
++# Check whether --enable-libtool-lock was given.
++if test "${enable_libtool_lock+set}" = set; then :
++ enableval=$enable_libtool_lock;
++fi
++
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *ELF-32*)
++ HPUX_IA64_MODE="32"
++ ;;
++ *ELF-64*)
++ HPUX_IA64_MODE="64"
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++*-*-irix6*)
++ # Find out which ABI we are using.
++ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -melf32bsmip"
++ ;;
++ *N32*)
++ LD="${LD-ld} -melf32bmipn32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -melf64bmip"
++ ;;
++ esac
++ else
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -32"
++ ;;
++ *N32*)
++ LD="${LD-ld} -n32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -64"
++ ;;
++ esac
++ fi
++ fi
++ rm -rf conftest*
++ ;;
++
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
++ case `/usr/bin/file conftest.o` in
++ *32-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_i386_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_i386"
++ ;;
++ ppc64-*linux*|powerpc64-*linux*)
++ LD="${LD-ld} -m elf32ppclinux"
++ ;;
++ s390x-*linux*)
++ LD="${LD-ld} -m elf_s390"
++ ;;
++ sparc64-*linux*)
++ LD="${LD-ld} -m elf32_sparc"
++ ;;
++ esac
++ ;;
++ *64-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_x86_64_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ ppc*-*linux*|powerpc*-*linux*)
++ LD="${LD-ld} -m elf64ppc"
++ ;;
++ s390*-*linux*|s390*-*tpf*)
++ LD="${LD-ld} -m elf64_s390"
++ ;;
++ sparc*-*linux*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++
++*-*-sco3.2v5*)
++ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++ SAVE_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS -belf"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
++$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
++if ${lt_cv_cc_needs_belf+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ lt_cv_cc_needs_belf=yes
++else
++ lt_cv_cc_needs_belf=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
++$as_echo "$lt_cv_cc_needs_belf" >&6; }
++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++ CFLAGS="$SAVE_CFLAGS"
++ fi
++ ;;
++*-*solaris*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }; then
++ case `/usr/bin/file conftest.o` in
++ *64-bit*)
++ case $lt_cv_prog_gnu_ld in
++ yes*)
++ case $host in
++ i?86-*-solaris*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ sparc*-*-solaris*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
++ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
++ LD="${LD-ld}_sol2"
++ fi
++ ;;
++ *)
++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++ LD="${LD-ld} -64"
++ fi
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++esac
++
++need_locks="$enable_libtool_lock"
++
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
++set dummy ${ac_tool_prefix}mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$MANIFEST_TOOL"; then
++ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
++if test -n "$MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
++$as_echo "$MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
++ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
++ # Extract the first word of "mt", so it can be a program name with args.
++set dummy mt; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_MANIFEST_TOOL"; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
++if test -n "$ac_ct_MANIFEST_TOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
++$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_MANIFEST_TOOL" = x; then
++ MANIFEST_TOOL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
++ fi
++else
++ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
++fi
++
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
++$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
++if ${lt_cv_path_mainfest_tool+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&5
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
++$as_echo "$lt_cv_path_mainfest_tool" >&6; }
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++
++
++
++
++
++
++ case $host_os in
++ rhapsody* | darwin*)
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_DSYMUTIL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$DSYMUTIL"; then
++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++DSYMUTIL=$ac_cv_prog_DSYMUTIL
++if test -n "$DSYMUTIL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
++$as_echo "$DSYMUTIL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_DSYMUTIL"; then
++ ac_ct_DSYMUTIL=$DSYMUTIL
++ # Extract the first word of "dsymutil", so it can be a program name with args.
++set dummy dsymutil; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_DSYMUTIL"; then
++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
++if test -n "$ac_ct_DSYMUTIL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
++$as_echo "$ac_ct_DSYMUTIL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_DSYMUTIL" = x; then
++ DSYMUTIL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ DSYMUTIL=$ac_ct_DSYMUTIL
++ fi
++else
++ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
++fi
++
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
++set dummy ${ac_tool_prefix}nmedit; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_NMEDIT+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$NMEDIT"; then
++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++NMEDIT=$ac_cv_prog_NMEDIT
++if test -n "$NMEDIT"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
++$as_echo "$NMEDIT" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_NMEDIT"; then
++ ac_ct_NMEDIT=$NMEDIT
++ # Extract the first word of "nmedit", so it can be a program name with args.
++set dummy nmedit; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_NMEDIT"; then
++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_NMEDIT="nmedit"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
++if test -n "$ac_ct_NMEDIT"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
++$as_echo "$ac_ct_NMEDIT" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_NMEDIT" = x; then
++ NMEDIT=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ NMEDIT=$ac_ct_NMEDIT
++ fi
++else
++ NMEDIT="$ac_cv_prog_NMEDIT"
++fi
++
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
++set dummy ${ac_tool_prefix}lipo; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_LIPO+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$LIPO"; then
++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++LIPO=$ac_cv_prog_LIPO
++if test -n "$LIPO"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
++$as_echo "$LIPO" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_LIPO"; then
++ ac_ct_LIPO=$LIPO
++ # Extract the first word of "lipo", so it can be a program name with args.
++set dummy lipo; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_LIPO"; then
++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_LIPO="lipo"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
++if test -n "$ac_ct_LIPO"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
++$as_echo "$ac_ct_LIPO" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_LIPO" = x; then
++ LIPO=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ LIPO=$ac_ct_LIPO
++ fi
++else
++ LIPO="$ac_cv_prog_LIPO"
++fi
++
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}otool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_OTOOL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$OTOOL"; then
++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++OTOOL=$ac_cv_prog_OTOOL
++if test -n "$OTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
++$as_echo "$OTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_OTOOL"; then
++ ac_ct_OTOOL=$OTOOL
++ # Extract the first word of "otool", so it can be a program name with args.
++set dummy otool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_OTOOL"; then
++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_OTOOL="otool"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
++if test -n "$ac_ct_OTOOL"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
++$as_echo "$ac_ct_OTOOL" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_OTOOL" = x; then
++ OTOOL=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ OTOOL=$ac_ct_OTOOL
++ fi
++else
++ OTOOL="$ac_cv_prog_OTOOL"
++fi
++
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
++set dummy ${ac_tool_prefix}otool64; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_OTOOL64+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$OTOOL64"; then
++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++OTOOL64=$ac_cv_prog_OTOOL64
++if test -n "$OTOOL64"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
++$as_echo "$OTOOL64" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++fi
++if test -z "$ac_cv_prog_OTOOL64"; then
++ ac_ct_OTOOL64=$OTOOL64
++ # Extract the first word of "otool64", so it can be a program name with args.
++set dummy otool64; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test -n "$ac_ct_OTOOL64"; then
++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++ ac_cv_prog_ac_ct_OTOOL64="otool64"
++ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++ done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
++if test -n "$ac_ct_OTOOL64"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
++$as_echo "$ac_ct_OTOOL64" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++ if test "x$ac_ct_OTOOL64" = x; then
++ OTOOL64=":"
++ else
++ case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++ OTOOL64=$ac_ct_OTOOL64
++ fi
++else
++ OTOOL64="$ac_cv_prog_OTOOL64"
++fi
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
++$as_echo_n "checking for -single_module linker flag... " >&6; }
++if ${lt_cv_apple_cc_single_mod+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_apple_cc_single_mod=no
++ if test -z "${LT_MULTI_MODULE}"; then
++ # By default we will add the -single_module flag. You can override
++ # by either setting the environment variable LT_MULTI_MODULE
++ # non-empty at configure time, or by adding -multi_module to the
++ # link flags.
++ rm -rf libconftest.dylib*
++ echo "int foo(void){return 1;}" > conftest.c
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&5
++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++ _lt_result=$?
++ # If there is a non-empty error log, and "single_module"
++ # appears in it, assume the flag caused a linker warning
++ if test -s conftest.err && $GREP single_module conftest.err; then
++ cat conftest.err >&5
++ # Otherwise, if the output was created with a 0 exit code from
++ # the compiler, it worked.
++ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
++ lt_cv_apple_cc_single_mod=yes
++ else
++ cat conftest.err >&5
++ fi
++ rm -rf libconftest.dylib*
++ rm -f conftest.*
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
++$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
++$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
++if ${lt_cv_ld_exported_symbols_list+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ld_exported_symbols_list=no
++ save_LDFLAGS=$LDFLAGS
++ echo "_main" > conftest.sym
++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ lt_cv_ld_exported_symbols_list=yes
++else
++ lt_cv_ld_exported_symbols_list=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LDFLAGS="$save_LDFLAGS"
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
++$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
++$as_echo_n "checking for -force_load linker flag... " >&6; }
++if ${lt_cv_ld_force_load+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_ld_force_load=no
++ cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
++ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
++ echo "$AR cru libconftest.a conftest.o" >&5
++ $AR cru libconftest.a conftest.o 2>&5
++ echo "$RANLIB libconftest.a" >&5
++ $RANLIB libconftest.a 2>&5
++ cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
++ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++ _lt_result=$?
++ if test -s conftest.err && $GREP force_load conftest.err; then
++ cat conftest.err >&5
++ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
++ lt_cv_ld_force_load=yes
++ else
++ cat conftest.err >&5
++ fi
++ rm -f conftest.err libconftest.a conftest conftest.c
++ rm -rf conftest.dSYM
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
++$as_echo "$lt_cv_ld_force_load" >&6; }
++ case $host_os in
++ rhapsody* | darwin1.[012])
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++ darwin1.*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ darwin*) # darwin 5.x on
++ # if running on 10.5 or later, the deployment target defaults
++ # to the OS version, if on x86, and 10.4, the deployment
++ # target defaults to 10.4. Don't you love it?
++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ 10.[012]*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ 10.*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ esac
++ ;;
++ esac
++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++ _lt_dar_single_mod='$single_module'
++ fi
++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++ else
++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ fi
++ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
++ _lt_dsymutil='~$DSYMUTIL $lib || :'
++ else
++ _lt_dsymutil=
++ fi
++ ;;
++ esac
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
++$as_echo_n "checking how to run the C preprocessor... " >&6; }
++# On Suns, sometimes $CPP names a directory.
++if test -n "$CPP" && test -d "$CPP"; then
++ CPP=
++fi
++if test -z "$CPP"; then
++ if ${ac_cv_prog_CPP+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ # Double quotes because CPP needs to be expanded
++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
++ do
++ ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
++ # On the NeXT, cc -E runs the code through the compiler's parser,
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++
++else
++ # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether nonexistent headers
++ # can be detected and how.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <ac_nonexistent.h>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++ # Broken: success on invalid input.
++continue
++else
++ # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.i conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then :
++ break
++fi
++
++ done
++ ac_cv_prog_CPP=$CPP
++
++fi
++ CPP=$ac_cv_prog_CPP
++else
++ ac_cv_prog_CPP=$CPP
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
++$as_echo "$CPP" >&6; }
++ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
++ # On the NeXT, cc -E runs the code through the compiler's parser,
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++
++else
++ # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether nonexistent headers
++ # can be detected and how.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <ac_nonexistent.h>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++ # Broken: success on invalid input.
++continue
++else
++ # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.i conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then :
++
++else
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details" "$LINENO" 5; }
++fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
++$as_echo_n "checking for ANSI C header files... " >&6; }
++if ${ac_cv_header_stdc+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdlib.h>
++#include <stdarg.h>
++#include <string.h>
++#include <float.h>
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_header_stdc=yes
++else
++ ac_cv_header_stdc=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++
++if test $ac_cv_header_stdc = yes; then
++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <string.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "memchr" >/dev/null 2>&1; then :
++
++else
++ ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdlib.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "free" >/dev/null 2>&1; then :
++
++else
++ ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
++ if test "$cross_compiling" = yes; then :
++ :
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <ctype.h>
++#include <stdlib.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++ (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
++
++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
++int
++main ()
++{
++ int i;
++ for (i = 0; i < 256; i++)
++ if (XOR (islower (i), ISLOWER (i))
++ || toupper (i) != TOUPPER (i))
++ return 2;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++
++else
++ ac_cv_header_stdc=no
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++fi
++
++fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
++$as_echo "$ac_cv_header_stdc" >&6; }
++if test $ac_cv_header_stdc = yes; then
++
++$as_echo "#define STDC_HEADERS 1" >>confdefs.h
++
++fi
++
++# On IRIX 5.3, sys/types and inttypes.h are conflicting.
++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
++ inttypes.h stdint.h unistd.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
++"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++
++for ac_header in dlfcn.h
++do :
++ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
++"
++if test "x$ac_cv_header_dlfcn_h" = xyes; then :
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_DLFCN_H 1
++_ACEOF
++
++fi
++
++done
++
++
++
++
++
++# Set options
++
++
++
++ enable_dlopen=no
++
++
++ enable_win32_dll=no
++
++
++ # Check whether --enable-shared was given.
++if test "${enable_shared+set}" = set; then :
++ enableval=$enable_shared; p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_shared=yes ;;
++ no) enable_shared=no ;;
++ *)
++ enable_shared=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_shared=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac
++else
++ enable_shared=yes
++fi
++
++
++
++
++
++
++
++
++
++ # Check whether --enable-static was given.
++if test "${enable_static+set}" = set; then :
++ enableval=$enable_static; p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_static=yes ;;
++ no) enable_static=no ;;
++ *)
++ enable_static=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_static=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac
++else
++ enable_static=yes
++fi
++
++
++
++
++
++
++
++
++
++
++# Check whether --with-pic was given.
++if test "${with_pic+set}" = set; then :
++ withval=$with_pic; lt_p=${PACKAGE-default}
++ case $withval in
++ yes|no) pic_mode=$withval ;;
++ *)
++ pic_mode=default
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for lt_pkg in $withval; do
++ IFS="$lt_save_ifs"
++ if test "X$lt_pkg" = "X$lt_p"; then
++ pic_mode=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac
++else
++ pic_mode=default
++fi
++
++
++test -z "$pic_mode" && pic_mode=default
++
++
++
++
++
++
++
++ # Check whether --enable-fast-install was given.
++if test "${enable_fast_install+set}" = set; then :
++ enableval=$enable_fast_install; p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_fast_install=yes ;;
++ no) enable_fast_install=no ;;
++ *)
++ enable_fast_install=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_fast_install=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac
++else
++ enable_fast_install=yes
++fi
++
++
++
++
++
++
++
++
++
++
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ltmain"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++test -z "$LN_S" && LN_S="ln -s"
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
++$as_echo_n "checking for objdir... " >&6; }
++if ${lt_cv_objdir+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++ lt_cv_objdir=.libs
++else
++ # MS-DOS does not allow filenames that begin with a dot.
++ lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
++$as_echo "$lt_cv_objdir" >&6; }
++objdir=$lt_cv_objdir
++
++
++
++
++
++cat >>confdefs.h <<_ACEOF
++#define LT_OBJDIR "$lt_cv_objdir/"
++_ACEOF
++
++
++
++
++case $host_os in
++aix3*)
++ # AIX sometimes has problems with the GCC collect2 program. For some
++ # reason, if we set the COLLECT_NAMES environment variable, the problems
++ # vanish in a puff of smoke.
++ if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++ fi
++ ;;
++esac
++
++# Global variables:
++ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$LD" && LD=ld
++test -z "$ac_objext" && ac_objext=o
++
++for cc_temp in $compiler""; do
++ case $cc_temp in
++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
++
++
++# Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++case $deplibs_check_method in
++file_magic*)
++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
++$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
++if ${lt_cv_path_MAGIC_CMD+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ case $MAGIC_CMD in
++[\\/*] | ?:[\\/]*)
++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++ ;;
++*)
++ lt_save_MAGIC_CMD="$MAGIC_CMD"
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
++ for ac_dir in $ac_dummy; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f $ac_dir/${ac_tool_prefix}file; then
++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
++ if test -n "$file_magic_test_file"; then
++ case $deplibs_check_method in
++ "file_magic "*)
++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++ $EGREP "$file_magic_regex" > /dev/null; then
++ :
++ else
++ cat <<_LT_EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such. This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem. Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool at gnu.org
++
++_LT_EOF
++ fi ;;
++ esac
++ fi
++ break
++ fi
++ done
++ IFS="$lt_save_ifs"
++ MAGIC_CMD="$lt_save_MAGIC_CMD"
++ ;;
++esac
++fi
++
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
++$as_echo "$MAGIC_CMD" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++
++
++
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++ if test -n "$ac_tool_prefix"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
++$as_echo_n "checking for file... " >&6; }
++if ${lt_cv_path_MAGIC_CMD+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ case $MAGIC_CMD in
++[\\/*] | ?:[\\/]*)
++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++ ;;
++*)
++ lt_save_MAGIC_CMD="$MAGIC_CMD"
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
++ for ac_dir in $ac_dummy; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f $ac_dir/file; then
++ lt_cv_path_MAGIC_CMD="$ac_dir/file"
++ if test -n "$file_magic_test_file"; then
++ case $deplibs_check_method in
++ "file_magic "*)
++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++ $EGREP "$file_magic_regex" > /dev/null; then
++ :
++ else
++ cat <<_LT_EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such. This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem. Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool at gnu.org
++
++_LT_EOF
++ fi ;;
++ esac
++ fi
++ break
++ fi
++ done
++ IFS="$lt_save_ifs"
++ MAGIC_CMD="$lt_save_MAGIC_CMD"
++ ;;
++esac
++fi
++
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
++$as_echo "$MAGIC_CMD" >&6; }
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++ else
++ MAGIC_CMD=:
++ fi
++fi
++
++ fi
++ ;;
++esac
++
++# Use C for the default configuration in the libtool script
++
++lt_save_CC="$CC"
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++# Source file extension for C test sources.
++ac_ext=c
++
++# Object file extension for compiled C test sources.
++objext=o
++objext=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
++
++
++
++
++
++
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++# Save the default compiler, since it gets overwritten when the other
++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
++compiler_DEFAULT=$CC
++
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
++
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
++
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++
++lt_prog_compiler_no_builtin_flag=
++
++if test "$GCC" = yes; then
++ case $cc_basename in
++ nvcc*)
++ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
++ *)
++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
++ esac
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
++if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_rtti_exceptions=no
++ ac_outfile=conftest.$ac_objext
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ lt_compiler_flag="-fno-rtti -fno-exceptions"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ # The option is referenced via a variable to avoid confusing sed.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
++ (eval "$lt_compile" 2>conftest.err)
++ ac_status=$?
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ if (exit $ac_status) && test -s "$ac_outfile"; then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings other than the usual output.
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++ lt_cv_prog_compiler_rtti_exceptions=yes
++ fi
++ fi
++ $RM conftest*
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
++
++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
++else
++ :
++fi
++
++fi
++
++
++
++
++
++
++ lt_prog_compiler_wl=
++lt_prog_compiler_pic=
++lt_prog_compiler_static=
++
++
++ if test "$GCC" = yes; then
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_static='-static'
++
++ case $host_os in
++ aix*)
++ # All AIX code is PIC.
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ lt_prog_compiler_static='-Bstatic'
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ lt_prog_compiler_pic='-fPIC'
++ ;;
++ m68k)
++ # FIXME: we need at least 68020 code to build shared libraries, but
++ # adding the `-m68020' flag to GCC prevents building anything better,
++ # like `-m68040'.
++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
++ ;;
++ esac
++ ;;
++
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++ # PIC is the default for these OSes.
++ ;;
++
++ mingw* | cygwin* | pw32* | os2* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ # Although the cygwin gcc ignores -fPIC, still need this for old-style
++ # (--disable-auto-import) libraries
++ lt_prog_compiler_pic='-DDLL_EXPORT'
++ ;;
++
++ darwin* | rhapsody*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ lt_prog_compiler_pic='-fno-common'
++ ;;
++
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ lt_prog_compiler_static=
++ ;;
++
++ hpux*)
++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
++ # sets the default TLS model and affects inlining.
++ case $host_cpu in
++ hppa*64*)
++ # +Z the default
++ ;;
++ *)
++ lt_prog_compiler_pic='-fPIC'
++ ;;
++ esac
++ ;;
++
++ interix[3-9]*)
++ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++ # Instead, we relocate shared libraries at runtime.
++ ;;
++
++ msdosdjgpp*)
++ # Just because we use GCC doesn't mean we suddenly get shared libraries
++ # on systems that don't support them.
++ lt_prog_compiler_can_build_shared=no
++ enable_shared=no
++ ;;
++
++ *nto* | *qnx*)
++ # QNX uses GNU C++, but need to define -shared option too, otherwise
++ # it will coredump.
++ lt_prog_compiler_pic='-fPIC -shared'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ lt_prog_compiler_pic=-Kconform_pic
++ fi
++ ;;
++
++ *)
++ lt_prog_compiler_pic='-fPIC'
++ ;;
++ esac
++
++ case $cc_basename in
++ nvcc*) # Cuda Compiler Driver 2.2
++ lt_prog_compiler_wl='-Xlinker '
++ if test -n "$lt_prog_compiler_pic"; then
++ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
++ fi
++ ;;
++ esac
++ else
++ # PORTME Check for flag to pass linker flags through the system compiler.
++ case $host_os in
++ aix*)
++ lt_prog_compiler_wl='-Wl,'
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ lt_prog_compiler_static='-Bstatic'
++ else
++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
++ fi
++ ;;
++
++ mingw* | cygwin* | pw32* | os2* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ lt_prog_compiler_pic='-DDLL_EXPORT'
++ ;;
++
++ hpux9* | hpux10* | hpux11*)
++ lt_prog_compiler_wl='-Wl,'
++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++ # not for PA HP-UX.
++ case $host_cpu in
++ hppa*64*|ia64*)
++ # +Z the default
++ ;;
++ *)
++ lt_prog_compiler_pic='+Z'
++ ;;
++ esac
++ # Is there a better lt_prog_compiler_static that works with the bundled CC?
++ lt_prog_compiler_static='${wl}-a ${wl}archive'
++ ;;
++
++ irix5* | irix6* | nonstopux*)
++ lt_prog_compiler_wl='-Wl,'
++ # PIC (with -KPIC) is the default.
++ lt_prog_compiler_static='-non_shared'
++ ;;
++
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ case $cc_basename in
++ # old Intel for x86_64 which still supported -KPIC.
++ ecc*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-static'
++ ;;
++ # icc used to be incompatible with GCC.
++ # ICC 10 doesn't accept -KPIC any more.
++ icc* | ifort*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-fPIC'
++ lt_prog_compiler_static='-static'
++ ;;
++ # Lahey Fortran 8.1.
++ lf95*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='--shared'
++ lt_prog_compiler_static='--static'
++ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ lt_prog_compiler_wl='-Wl,-Wl,,'
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group compilers (*not* the Pentium gcc compiler,
++ # which looks to be a dead project)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-fpic'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++ ccc*)
++ lt_prog_compiler_wl='-Wl,'
++ # All Alpha code is PIC.
++ lt_prog_compiler_static='-non_shared'
++ ;;
++ xl* | bgxl* | bgf* | mpixl*)
++ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-qpic'
++ lt_prog_compiler_static='-qstaticlink'
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ lt_prog_compiler_wl=''
++ ;;
++ *Sun\ F* | *Sun*Fortran*)
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ lt_prog_compiler_wl='-Qoption ld '
++ ;;
++ *Sun\ C*)
++ # Sun C 5.9
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ lt_prog_compiler_wl='-Wl,'
++ ;;
++ *Intel*\ [CF]*Compiler*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-fPIC'
++ lt_prog_compiler_static='-static'
++ ;;
++ *Portland\ Group*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-fpic'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++
++ newsos6)
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++
++ *nto* | *qnx*)
++ # QNX uses GNU C++, but need to define -shared option too, otherwise
++ # it will coredump.
++ lt_prog_compiler_pic='-fPIC -shared'
++ ;;
++
++ osf3* | osf4* | osf5*)
++ lt_prog_compiler_wl='-Wl,'
++ # All OSF/1 code is PIC.
++ lt_prog_compiler_static='-non_shared'
++ ;;
++
++ rdos*)
++ lt_prog_compiler_static='-non_shared'
++ ;;
++
++ solaris*)
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ case $cc_basename in
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
++ lt_prog_compiler_wl='-Qoption ld ';;
++ *)
++ lt_prog_compiler_wl='-Wl,';;
++ esac
++ ;;
++
++ sunos4*)
++ lt_prog_compiler_wl='-Qoption ld '
++ lt_prog_compiler_pic='-PIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++
++ sysv4 | sysv4.2uw2* | sysv4.3*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec ;then
++ lt_prog_compiler_pic='-Kconform_pic'
++ lt_prog_compiler_static='-Bstatic'
++ fi
++ ;;
++
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_pic='-KPIC'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++
++ unicos*)
++ lt_prog_compiler_wl='-Wl,'
++ lt_prog_compiler_can_build_shared=no
++ ;;
++
++ uts4*)
++ lt_prog_compiler_pic='-pic'
++ lt_prog_compiler_static='-Bstatic'
++ ;;
++
++ *)
++ lt_prog_compiler_can_build_shared=no
++ ;;
++ esac
++ fi
++
++case $host_os in
++ # For platforms which do not support PIC, -DPIC is meaningless:
++ *djgpp*)
++ lt_prog_compiler_pic=
++ ;;
++ *)
++ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
++ ;;
++esac
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
++if ${lt_cv_prog_compiler_pic+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
++$as_echo "$lt_cv_prog_compiler_pic" >&6; }
++lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$lt_prog_compiler_pic"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
++$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
++if ${lt_cv_prog_compiler_pic_works+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_pic_works=no
++ ac_outfile=conftest.$ac_objext
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ # The option is referenced via a variable to avoid confusing sed.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
++ (eval "$lt_compile" 2>conftest.err)
++ ac_status=$?
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ if (exit $ac_status) && test -s "$ac_outfile"; then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings other than the usual output.
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++ lt_cv_prog_compiler_pic_works=yes
++ fi
++ fi
++ $RM conftest*
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
++$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
++
++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
++ case $lt_prog_compiler_pic in
++ "" | " "*) ;;
++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
++ esac
++else
++ lt_prog_compiler_pic=
++ lt_prog_compiler_can_build_shared=no
++fi
++
++fi
++
++
++
++
++
++
++
++
++
++
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
++if ${lt_cv_prog_compiler_static_works+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_static_works=no
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++ # The linker can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ if test -s conftest.err; then
++ # Append any errors to the config.log.
++ cat conftest.err 1>&5
++ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ lt_cv_prog_compiler_static_works=yes
++ fi
++ else
++ lt_cv_prog_compiler_static_works=yes
++ fi
++ fi
++ $RM -r conftest*
++ LDFLAGS="$save_LDFLAGS"
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
++$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
++
++if test x"$lt_cv_prog_compiler_static_works" = xyes; then
++ :
++else
++ lt_prog_compiler_static=
++fi
++
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++if ${lt_cv_prog_compiler_c_o+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_c_o=no
++ $RM -r conftest 2>/dev/null
++ mkdir conftest
++ cd conftest
++ mkdir out
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ lt_compiler_flag="-o out/conftest2.$ac_objext"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
++ (eval "$lt_compile" 2>out/conftest.err)
++ ac_status=$?
++ cat out/conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ if (exit $ac_status) && test -s out/conftest2.$ac_objext
++ then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++ lt_cv_prog_compiler_c_o=yes
++ fi
++ fi
++ chmod u+w . 2>&5
++ $RM conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++ $RM out/* && rmdir out
++ cd ..
++ $RM -r conftest
++ $RM conftest*
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
++$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++if ${lt_cv_prog_compiler_c_o+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler_c_o=no
++ $RM -r conftest 2>/dev/null
++ mkdir conftest
++ cd conftest
++ mkdir out
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ lt_compiler_flag="-o out/conftest2.$ac_objext"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
++ (eval "$lt_compile" 2>out/conftest.err)
++ ac_status=$?
++ cat out/conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ if (exit $ac_status) && test -s out/conftest2.$ac_objext
++ then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++ lt_cv_prog_compiler_c_o=yes
++ fi
++ fi
++ chmod u+w . 2>&5
++ $RM conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++ $RM out/* && rmdir out
++ cd ..
++ $RM -r conftest
++ $RM conftest*
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
++$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
++
++
++
++
++hard_links="nottested"
++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
++ # do not overwrite the value of need_locks provided by the user
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
++$as_echo_n "checking if we can lock with hard links... " >&6; }
++ hard_links=yes
++ $RM conftest*
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ touch conftest.a
++ ln conftest.a conftest.b 2>&5 || hard_links=no
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
++$as_echo "$hard_links" >&6; }
++ if test "$hard_links" = no; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++ need_locks=warn
++ fi
++else
++ need_locks=no
++fi
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++
++ runpath_var=
++ allow_undefined_flag=
++ always_export_symbols=no
++ archive_cmds=
++ archive_expsym_cmds=
++ compiler_needs_object=no
++ enable_shared_with_static_runtimes=no
++ export_dynamic_flag_spec=
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ hardcode_automatic=no
++ hardcode_direct=no
++ hardcode_direct_absolute=no
++ hardcode_libdir_flag_spec=
++ hardcode_libdir_separator=
++ hardcode_minus_L=no
++ hardcode_shlibpath_var=unsupported
++ inherit_rpath=no
++ link_all_deplibs=unknown
++ module_cmds=
++ module_expsym_cmds=
++ old_archive_from_new_cmds=
++ old_archive_from_expsyms_cmds=
++ thread_safe_flag_spec=
++ whole_archive_flag_spec=
++ # include_expsyms should be a list of space-separated symbols to be *always*
++ # included in the symbol list
++ include_expsyms=
++ # exclude_expsyms can be an extended regexp of symbols to exclude
++ # it will be wrapped by ` (' and `)$', so one must not match beginning or
++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++ # as well as any symbol that contains `d'.
++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++ # platforms (ab)use it in PIC code, but their linkers get confused if
++ # the symbol is explicitly referenced. Since portable code cannot
++ # rely on this symbol name, it's probably fine to never include it in
++ # preloaded symbol tables.
++ # Exclude shared library initialization/finalization symbols.
++ extract_expsyms_cmds=
++
++ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ # FIXME: the MSVC++ port hasn't been tested in a loooong time
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ if test "$GCC" != yes; then
++ with_gnu_ld=no
++ fi
++ ;;
++ interix*)
++ # we just hope/assume this is gcc and not c89 (= MSVC++)
++ with_gnu_ld=yes
++ ;;
++ openbsd*)
++ with_gnu_ld=no
++ ;;
++ linux* | k*bsd*-gnu | gnu*)
++ link_all_deplibs=no
++ ;;
++ esac
++
++ ld_shlibs=yes
++
++ # On some targets, GNU ld is compatible enough with the native linker
++ # that we're better off using the native interface for both.
++ lt_use_gnu_ld_interface=no
++ if test "$with_gnu_ld" = yes; then
++ case $host_os in
++ aix*)
++ # The AIX port of GNU ld has always aspired to compatibility
++ # with the native linker. However, as the warning in the GNU ld
++ # block says, versions before 2.19.5* couldn't really create working
++ # shared libraries, regardless of the interface used.
++ case `$LD -v 2>&1` in
++ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
++ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ fi
++
++ if test "$lt_use_gnu_ld_interface" = yes; then
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ wlarc='${wl}'
++
++ # Set some defaults for GNU ld with shared library support. These
++ # are reset later if shared libraries are not supported. Putting them
++ # here allows them to be overridden if necessary.
++ runpath_var=LD_RUN_PATH
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ export_dynamic_flag_spec='${wl}--export-dynamic'
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ whole_archive_flag_spec=
++ fi
++ supports_anon_versioning=no
++ case `$LD -v 2>&1` in
++ *GNU\ gold*) supports_anon_versioning=yes ;;
++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++ *\ 2.11.*) ;; # other 2.11 versions
++ *) supports_anon_versioning=yes ;;
++ esac
++
++ # See if GNU ld supports shared libraries.
++ case $host_os in
++ aix[3-9]*)
++ # On AIX/PPC, the GNU linker is very broken
++ if test "$host_cpu" != ia64; then
++ ld_shlibs=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.19, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support. If you
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
++
++_LT_EOF
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds=''
++ ;;
++ m68k)
++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_minus_L=yes
++ ;;
++ esac
++ ;;
++
++ beos*)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ allow_undefined_flag=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ ld_shlibs=no
++ fi
++ ;;
++
++ cygwin* | mingw* | pw32* | cegcc*)
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
++ # as there is no search path for DLLs.
++ hardcode_libdir_flag_spec='-L$libdir'
++ export_dynamic_flag_spec='${wl}--export-all-symbols'
++ allow_undefined_flag=unsupported
++ always_export_symbols=no
++ enable_shared_with_static_runtimes=yes
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
++ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ ld_shlibs=no
++ fi
++ ;;
++
++ haiku*)
++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ link_all_deplibs=yes
++ ;;
++
++ interix[3-9]*)
++ hardcode_direct=no
++ hardcode_shlibpath_var=no
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ export_dynamic_flag_spec='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++ tmp_diet=no
++ if test "$host_os" = linux-dietlibc; then
++ case $cc_basename in
++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
++ esac
++ fi
++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
++ && test "$tmp_diet" = no
++ then
++ tmp_addflag=' $pic_flag'
++ tmp_sharedflag='-shared'
++ case $cc_basename,$host_cpu in
++ pgcc*) # Portland Group C compiler
++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag'
++ ;;
++ pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group f77 and f90 compilers
++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag -Mnomain' ;;
++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
++ tmp_addflag=' -i_dynamic' ;;
++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
++ tmp_addflag=' -i_dynamic -nofor_main' ;;
++ ifc* | ifort*) # Intel Fortran compiler
++ tmp_addflag=' -nofor_main' ;;
++ lf95*) # Lahey Fortran 8.1
++ whole_archive_flag_spec=
++ tmp_sharedflag='--shared' ;;
++ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++ tmp_sharedflag='-qmkshrobj'
++ tmp_addflag= ;;
++ nvcc*) # Cuda Compiler Driver 2.2
++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ compiler_needs_object=yes
++ ;;
++ esac
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*) # Sun C 5.9
++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ compiler_needs_object=yes
++ tmp_sharedflag='-G' ;;
++ *Sun\ F*) # Sun Fortran 8.3
++ tmp_sharedflag='-G' ;;
++ esac
++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++ if test "x$supports_anon_versioning" = xyes; then
++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++
++ case $cc_basename in
++ xlf* | bgf* | bgxlf* | mpixlf*)
++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
++ if test "x$supports_anon_versioning" = xyes; then
++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ fi
++ ;;
++ esac
++ else
++ ld_shlibs=no
++ fi
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++ wlarc=
++ else
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ fi
++ ;;
++
++ solaris*)
++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
++ ld_shlibs=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ ld_shlibs=no
++ fi
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++ case `$LD -v 2>&1` in
++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
++ ld_shlibs=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++ ;;
++ *)
++ # For security reasons, it is highly recommended that you always
++ # use absolute paths for naming shared libraries, and exclude the
++ # DT_RUNPATH tag from executables and libraries. But doing so
++ # requires that you compile everything twice, which is a pain.
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ esac
++ ;;
++
++ sunos4*)
++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ wlarc=
++ hardcode_direct=yes
++ hardcode_shlibpath_var=no
++ ;;
++
++ *)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ ld_shlibs=no
++ fi
++ ;;
++ esac
++
++ if test "$ld_shlibs" = no; then
++ runpath_var=
++ hardcode_libdir_flag_spec=
++ export_dynamic_flag_spec=
++ whole_archive_flag_spec=
++ fi
++ else
++ # PORTME fill in a description of your system's linker (not GNU ld)
++ case $host_os in
++ aix3*)
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++ # Note: this linker hardcodes the directories in LIBPATH if there
++ # are no directories specified by -L.
++ hardcode_minus_L=yes
++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++ # Neither direct hardcoding nor static linking is supported with a
++ # broken collect2.
++ hardcode_direct=unsupported
++ fi
++ ;;
++
++ aix[4-9]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ # If we're using GNU nm, then we don't want the "-C" option.
++ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global
++ # defined symbols, whereas GNU nm marks them as "W".
++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ else
++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ fi
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ ;;
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++ archive_cmds=''
++ hardcode_direct=yes
++ hardcode_direct_absolute=yes
++ hardcode_libdir_separator=':'
++ link_all_deplibs=yes
++ file_list_spec='${wl}-f,'
++
++ if test "$GCC" = yes; then
++ case $host_os in aix4.[012]|aix4.[012].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" &&
++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ hardcode_direct=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ hardcode_minus_L=yes
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_libdir_separator=
++ fi
++ ;;
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ link_all_deplibs=no
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
++
++ export_dynamic_flag_spec='${wl}-bexpall'
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ always_export_symbols=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ allow_undefined_flag='-berok'
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if ${lt_cv_aix_libpath_+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
++
++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ else
++ if test "$host_cpu" = ia64; then
++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
++ allow_undefined_flag="-z nodefs"
++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ if ${lt_cv_aix_libpath_+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++
++ lt_aix_libpath_sed='
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }'
++ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ if test -z "$lt_cv_aix_libpath_"; then
++ lt_cv_aix_libpath_="/usr/lib:/lib"
++ fi
++
++fi
++
++ aix_libpath=$lt_cv_aix_libpath_
++fi
++
++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ no_undefined_flag=' ${wl}-bernotok'
++ allow_undefined_flag=' ${wl}-berok'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ whole_archive_flag_spec='$convenience'
++ fi
++ archive_cmds_need_lc=yes
++ # This is similar to how AIX traditionally builds its shared libraries.
++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ archive_expsym_cmds=''
++ ;;
++ m68k)
++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_minus_L=yes
++ ;;
++ esac
++ ;;
++
++ bsdi[45]*)
++ export_dynamic_flag_spec=-rdynamic
++ ;;
++
++ cygwin* | mingw* | pw32* | cegcc*)
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ always_export_symbols=yes
++ file_list_spec='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
++ enable_shared_with_static_runtimes=yes
++ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ old_postinstall_cmds='chmod 644 $oldlib'
++ postlink_cmds='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ hardcode_libdir_flag_spec=' '
++ allow_undefined_flag=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ old_archive_from_new_cmds='true'
++ # FIXME: Should let the user specify the lib program.
++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ enable_shared_with_static_runtimes=yes
++ ;;
++ esac
++ ;;
++
++ darwin* | rhapsody*)
++
++
++ archive_cmds_need_lc=no
++ hardcode_direct=no
++ hardcode_automatic=yes
++ hardcode_shlibpath_var=unsupported
++ if test "$lt_cv_ld_force_load" = "yes"; then
++ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++
++ else
++ whole_archive_flag_spec=''
++ fi
++ link_all_deplibs=yes
++ allow_undefined_flag="$_lt_dar_allow_undefined"
++ case $cc_basename in
++ ifort*) _lt_dar_can_shared=yes ;;
++ *) _lt_dar_can_shared=$GCC ;;
++ esac
++ if test "$_lt_dar_can_shared" = "yes"; then
++ output_verbose_link_cmd=func_echo_all
++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++
++ else
++ ld_shlibs=no
++ fi
++
++ ;;
++
++ dgux*)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_shlibpath_var=no
++ ;;
++
++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++ # support. Future versions do this automatically, but an explicit c++rt0.o
++ # does not break anything, and helps significantly (at the cost of a little
++ # extra space).
++ freebsd2.2*)
++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++ hardcode_libdir_flag_spec='-R$libdir'
++ hardcode_direct=yes
++ hardcode_shlibpath_var=no
++ ;;
++
++ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++ freebsd2.*)
++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=yes
++ hardcode_minus_L=yes
++ hardcode_shlibpath_var=no
++ ;;
++
++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++ freebsd* | dragonfly*)
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ hardcode_libdir_flag_spec='-R$libdir'
++ hardcode_direct=yes
++ hardcode_shlibpath_var=no
++ ;;
++
++ hpux9*)
++ if test "$GCC" = yes; then
++ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ fi
++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++ hardcode_libdir_separator=:
++ hardcode_direct=yes
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ hardcode_minus_L=yes
++ export_dynamic_flag_spec='${wl}-E'
++ ;;
++
++ hpux10*)
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ if test "$with_gnu_ld" = no; then
++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++ hardcode_libdir_separator=:
++ hardcode_direct=yes
++ hardcode_direct_absolute=yes
++ export_dynamic_flag_spec='${wl}-E'
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ hardcode_minus_L=yes
++ fi
++ ;;
++
++ hpux11*)
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ case $host_cpu in
++ hppa*64*)
++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ else
++ case $host_cpu in
++ hppa*64*)
++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++
++ # Older versions of the 11.00 compiler do not understand -b yet
++ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
++$as_echo_n "checking if $CC understands -b... " >&6; }
++if ${lt_cv_prog_compiler__b+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_prog_compiler__b=no
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -b"
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++ # The linker can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ if test -s conftest.err; then
++ # Append any errors to the config.log.
++ cat conftest.err 1>&5
++ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ lt_cv_prog_compiler__b=yes
++ fi
++ else
++ lt_cv_prog_compiler__b=yes
++ fi
++ fi
++ $RM -r conftest*
++ LDFLAGS="$save_LDFLAGS"
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
++$as_echo "$lt_cv_prog_compiler__b" >&6; }
++
++if test x"$lt_cv_prog_compiler__b" = xyes; then
++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++else
++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++fi
++
++ ;;
++ esac
++ fi
++ if test "$with_gnu_ld" = no; then
++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++ hardcode_libdir_separator=:
++
++ case $host_cpu in
++ hppa*64*|ia64*)
++ hardcode_direct=no
++ hardcode_shlibpath_var=no
++ ;;
++ *)
++ hardcode_direct=yes
++ hardcode_direct_absolute=yes
++ export_dynamic_flag_spec='${wl}-E'
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ hardcode_minus_L=yes
++ ;;
++ esac
++ fi
++ ;;
++
++ irix5* | irix6* | nonstopux*)
++ if test "$GCC" = yes; then
++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ # Try to use the -exported_symbol ld option, if it does not
++ # work, assume that -exports_file does not work either and
++ # implicitly export all symbols.
++ # This should be the same for all languages, so no per-tag cache variable.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
++$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
++if ${lt_cv_irix_exported_symbol+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++int foo (void) { return 0; }
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ lt_cv_irix_exported_symbol=yes
++else
++ lt_cv_irix_exported_symbol=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LDFLAGS="$save_LDFLAGS"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
++$as_echo "$lt_cv_irix_exported_symbol" >&6; }
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
++ else
++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++ fi
++ archive_cmds_need_lc='no'
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ hardcode_libdir_separator=:
++ inherit_rpath=yes
++ link_all_deplibs=yes
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
++ else
++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
++ fi
++ hardcode_libdir_flag_spec='-R$libdir'
++ hardcode_direct=yes
++ hardcode_shlibpath_var=no
++ ;;
++
++ newsos6)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=yes
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ hardcode_libdir_separator=:
++ hardcode_shlibpath_var=no
++ ;;
++
++ *nto* | *qnx*)
++ ;;
++
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ hardcode_direct=yes
++ hardcode_shlibpath_var=no
++ hardcode_direct_absolute=yes
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ export_dynamic_flag_spec='${wl}-E'
++ else
++ case $host_os in
++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_libdir_flag_spec='-R$libdir'
++ ;;
++ *)
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
++ else
++ ld_shlibs=no
++ fi
++ ;;
++
++ os2*)
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_minus_L=yes
++ allow_undefined_flag=unsupported
++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++ ;;
++
++ osf3*)
++ if test "$GCC" = yes; then
++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ allow_undefined_flag=' -expect_unresolved \*'
++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ fi
++ archive_cmds_need_lc='no'
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ hardcode_libdir_separator=:
++ ;;
++
++ osf4* | osf5*) # as osf3* with the addition of -msym flag
++ if test "$GCC" = yes; then
++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
++ archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++ else
++ allow_undefined_flag=' -expect_unresolved \*'
++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++
++ # Both c and cxx compiler support -rpath directly
++ hardcode_libdir_flag_spec='-rpath $libdir'
++ fi
++ archive_cmds_need_lc='no'
++ hardcode_libdir_separator=:
++ ;;
++
++ solaris*)
++ no_undefined_flag=' -z defs'
++ if test "$GCC" = yes; then
++ wlarc='${wl}'
++ archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ else
++ case `$CC -V 2>&1` in
++ *"Compilers 5.0"*)
++ wlarc=''
++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
++ ;;
++ *)
++ wlarc='${wl}'
++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ ;;
++ esac
++ fi
++ hardcode_libdir_flag_spec='-R$libdir'
++ hardcode_shlibpath_var=no
++ case $host_os in
++ solaris2.[0-5] | solaris2.[0-5].*) ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'. GCC discards it without `$wl',
++ # but is careful enough not to reorder.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ if test "$GCC" = yes; then
++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ else
++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
++ fi
++ ;;
++ esac
++ link_all_deplibs=yes
++ ;;
++
++ sunos4*)
++ if test "x$host_vendor" = xsequent; then
++ # Use $CC to link under sequent, because it throws in some extra .o
++ # files that make .init and .fini sections work.
++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_direct=yes
++ hardcode_minus_L=yes
++ hardcode_shlibpath_var=no
++ ;;
++
++ sysv4)
++ case $host_vendor in
++ sni)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=yes # is this really true???
++ ;;
++ siemens)
++ ## LD is ld it makes a PLAMLIB
++ ## CC just makes a GrossModule.
++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++ reload_cmds='$CC -r -o $output$reload_objs'
++ hardcode_direct=no
++ ;;
++ motorola)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
++ ;;
++ esac
++ runpath_var='LD_RUN_PATH'
++ hardcode_shlibpath_var=no
++ ;;
++
++ sysv4.3*)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_shlibpath_var=no
++ export_dynamic_flag_spec='-Bexport'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_shlibpath_var=no
++ runpath_var=LD_RUN_PATH
++ hardcode_runpath_var=yes
++ ld_shlibs=yes
++ fi
++ ;;
++
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
++ no_undefined_flag='${wl}-z,text'
++ archive_cmds_need_lc=no
++ hardcode_shlibpath_var=no
++ runpath_var='LD_RUN_PATH'
++
++ if test "$GCC" = yes; then
++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ no_undefined_flag='${wl}-z,text'
++ allow_undefined_flag='${wl}-z,nodefs'
++ archive_cmds_need_lc=no
++ hardcode_shlibpath_var=no
++ hardcode_libdir_flag_spec='${wl}-R,$libdir'
++ hardcode_libdir_separator=':'
++ link_all_deplibs=yes
++ export_dynamic_flag_spec='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
++
++ if test "$GCC" = yes; then
++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
++ ;;
++
++ uts4*)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_shlibpath_var=no
++ ;;
++
++ *)
++ ld_shlibs=no
++ ;;
++ esac
++
++ if test x$host_vendor = xsni; then
++ case $host in
++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++ export_dynamic_flag_spec='${wl}-Blargedynsym'
++ ;;
++ esac
++ fi
++ fi
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
++$as_echo "$ld_shlibs" >&6; }
++test "$ld_shlibs" = no && can_build_shared=no
++
++with_gnu_ld=$with_gnu_ld
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$archive_cmds_need_lc" in
++x|xyes)
++ # Assume -lc should be added
++ archive_cmds_need_lc=yes
++
++ if test "$enable_shared" = yes && test "$GCC" = yes; then
++ case $archive_cmds in
++ *'~'*)
++ # FIXME: we may have to deal with multi-command sequences.
++ ;;
++ '$CC '*)
++ # Test whether the compiler implicitly links with -lc since on some
++ # systems, -lgcc has to come before -lc. If gcc already passes -lc
++ # to ld, don't add -lc before -lgcc.
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
++$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
++if ${lt_cv_archive_cmds_need_lc+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ $RM conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$lt_prog_compiler_wl
++ pic_flag=$lt_prog_compiler_pic
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$allow_undefined_flag
++ allow_undefined_flag=
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; }
++ then
++ lt_cv_archive_cmds_need_lc=no
++ else
++ lt_cv_archive_cmds_need_lc=yes
++ fi
++ allow_undefined_flag=$lt_save_allow_undefined_flag
++ else
++ cat conftest.err 1>&5
++ fi
++ $RM conftest*
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
++$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
++ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
++ ;;
++ esac
++ fi
++ ;;
++esac
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
++$as_echo_n "checking dynamic linker characteristics... " >&6; }
++
++if test "$GCC" = yes; then
++ case $host_os in
++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++ *) lt_awk_arg="/^libraries:/" ;;
++ esac
++ case $host_os in
++ mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
++ *) lt_sed_strip_eq="s,=/,/,g" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++ case $lt_search_path_spec in
++ *\;*)
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++ ;;
++ *)
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ esac
++ # Ok, now we have the path, separated by spaces, we can step through it
++ # and add multilib dir if necessary.
++ lt_tmp_lt_search_path_spec=
++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++ for lt_sys_path in $lt_search_path_spec; do
++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++ else
++ test -d "$lt_sys_path" && \
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++ fi
++ done
++ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++ lt_foo="";
++ lt_count=0;
++ for (lt_i = NF; lt_i > 0; lt_i--) {
++ if ($lt_i != "" && $lt_i != ".") {
++ if ($lt_i == "..") {
++ lt_count++;
++ } else {
++ if (lt_count == 0) {
++ lt_foo="/" $lt_i lt_foo;
++ } else {
++ lt_count--;
++ }
++ }
++ }
++ }
++ if (lt_foo != "") { lt_freq[lt_foo]++; }
++ if (lt_freq[lt_foo] == 1) { print lt_foo; }
++}'`
++ # AWK program above erroneously prepends '/' to C:/dos/paths
++ # for these hosts.
++ case $host_os in
++ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++ $SED 's,/\([A-Za-z]:\),\1,g'` ;;
++ esac
++ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++ shlibpath_var=LIBPATH
++
++ # AIX 3 has no versioning support, so we append a major version to the name.
++ soname_spec='${libname}${release}${shared_ext}$major'
++ ;;
++
++aix[4-9]*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
++ if test "$host_cpu" = ia64; then
++ # AIX 5 supports IA64
++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ else
++ # With GCC up to 2.95.x, collect2 would create an import file
++ # for dependence libraries. The import file would start with
++ # the line `#! .'. This would cause the generated library to
++ # depend on `.', always an invalid library. This was fixed in
++ # development snapshots of GCC prior to 3.0.
++ case $host_os in
++ aix4 | aix4.[01] | aix4.[01].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
++ ;;
++ esac
++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++ # soname into executable. Probably we can add versioning support to
++ # collect2, so additional links can be useful in future.
++ if test "$aix_use_runtimelinking" = yes; then
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ else
++ # We preserve .a as extension for shared libraries through AIX4.2
++ # and later when we are not doing run time linking.
++ library_names_spec='${libname}${release}.a $libname.a'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ fi
++ shlibpath_var=LIBPATH
++ fi
++ ;;
++
++amigaos*)
++ case $host_cpu in
++ powerpc)
++ # Since July 2007 AmigaOS4 officially supports .so libraries.
++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ ;;
++ m68k)
++ library_names_spec='$libname.ixlibrary $libname.a'
++ # Create ${libname}_ixlibrary.a entries in /sys/libs.
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ ;;
++ esac
++ ;;
++
++beos*)
++ library_names_spec='${libname}${shared_ext}'
++ dynamic_linker="$host_os ld.so"
++ shlibpath_var=LIBRARY_PATH
++ ;;
++
++bsdi[45]*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++ # the default ld.so.conf also contains /usr/contrib/lib and
++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++ # libtool to hard-code these into programs
++ ;;
++
++cygwin* | mingw* | pw32* | cegcc*)
++ version_type=windows
++ shrext_cmds=".dll"
++ need_version=no
++ need_lib_prefix=no
++
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
++ library_names_spec='$libname.dll.a'
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname~
++ chmod a+x \$dldir/$dlname~
++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
++ fi'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++
++ case $host_os in
++ cygwin*)
++ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
++ ;;
++ mingw* | cegcc*)
++ # MinGW DLLs use traditional 'lib' prefix
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ ;;
++ pw32*)
++ # pw32 DLLs use 'pw' prefix rather than 'lib'
++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ ;;
++ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
++ ;;
++
++ *)
++ # Assume MSVC wrapper
++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
++ ;;
++ esac
++ # FIXME: first we should search . and the directory the executable is in
++ shlibpath_var=PATH
++ ;;
++
++darwin* | rhapsody*)
++ dynamic_linker="$host_os dyld"
++ version_type=darwin
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++ soname_spec='${libname}${release}${major}$shared_ext'
++ shlibpath_overrides_runpath=yes
++ shlibpath_var=DYLD_LIBRARY_PATH
++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++ ;;
++
++dgux*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
++
++freebsd* | dragonfly*)
++ # DragonFly does not have aout. When/if they implement a new
++ # versioning mechanism, adjust this.
++ if test -x /usr/bin/objformat; then
++ objformat=`/usr/bin/objformat`
++ else
++ case $host_os in
++ freebsd[23].*) objformat=aout ;;
++ *) objformat=elf ;;
++ esac
++ fi
++ version_type=freebsd-$objformat
++ case $version_type in
++ freebsd-elf*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ need_version=no
++ need_lib_prefix=no
++ ;;
++ freebsd-*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++ need_version=yes
++ ;;
++ esac
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_os in
++ freebsd2.*)
++ shlibpath_overrides_runpath=yes
++ ;;
++ freebsd3.[01]* | freebsdelf3.[01]*)
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++ *) # from 4.6 on, and DragonFly
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++ esac
++ ;;
++
++gnu*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++haiku*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ dynamic_linker="$host_os runtime_loader"
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++ hardcode_into_libs=yes
++ ;;
++
++hpux9* | hpux10* | hpux11*)
++ # Give a soname corresponding to the major version so that dld.sl refuses to
++ # link against other versions.
++ version_type=sunos
++ need_lib_prefix=no
++ need_version=no
++ case $host_cpu in
++ ia64*)
++ shrext_cmds='.so'
++ hardcode_into_libs=yes
++ dynamic_linker="$host_os dld.so"
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ if test "X$HPUX_IA64_MODE" = X32; then
++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++ else
++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++ fi
++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++ ;;
++ hppa*64*)
++ shrext_cmds='.sl'
++ hardcode_into_libs=yes
++ dynamic_linker="$host_os dld.sl"
++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++ ;;
++ *)
++ shrext_cmds='.sl'
++ dynamic_linker="$host_os dld.sl"
++ shlibpath_var=SHLIB_PATH
++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ ;;
++ esac
++ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
++ postinstall_cmds='chmod 555 $lib'
++ # or fails outright, so override atomically:
++ install_override_mode=555
++ ;;
++
++interix[3-9]*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++irix5* | irix6* | nonstopux*)
++ case $host_os in
++ nonstopux*) version_type=nonstopux ;;
++ *)
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ version_type=linux # correct to gnu/linux during the next big refactor
++ else
++ version_type=irix
++ fi ;;
++ esac
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++ case $host_os in
++ irix5* | nonstopux*)
++ libsuff= shlibsuff=
++ ;;
++ *)
++ case $LD in # libtool.m4 will add one of these switches to LD
++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++ libsuff= shlibsuff= libmagic=32-bit;;
++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++ libsuff=32 shlibsuff=N32 libmagic=N32;;
++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++ libsuff=64 shlibsuff=64 libmagic=64-bit;;
++ *) libsuff= shlibsuff= libmagic=never-match;;
++ esac
++ ;;
++ esac
++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++ hardcode_into_libs=yes
++ ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++ dynamic_linker=no
++ ;;
++
++# This must be glibc/ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++
++ # Some binutils ld are patched to set DT_RUNPATH
++ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ lt_cv_shlibpath_overrides_runpath=no
++ save_LDFLAGS=$LDFLAGS
++ save_libdir=$libdir
++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
++ lt_cv_shlibpath_overrides_runpath=yes
++fi
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ LDFLAGS=$save_LDFLAGS
++ libdir=$save_libdir
++
++fi
++
++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
++
++ # This implies no fast_install, which is unacceptable.
++ # Some rework will be needed to allow for fast_install
++ # before this can be enabled.
++ hardcode_into_libs=yes
++
++ # Append ld.so.conf contents to the search path
++ if test -f /etc/ld.so.conf; then
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++ fi
++
++ # We used to test for /lib/ld.so.1 and disable shared libraries on
++ # powerpc, because MkLinux only supported shared libraries with the
++ # GNU dynamic linker. Since this was broken with cross compilers,
++ # most powerpc-linux boxes support dynamic linking these days and
++ # people can always --disable-shared, the test was removed, and we
++ # assume the GNU/Linux dynamic linker is in use.
++ dynamic_linker='GNU/Linux ld.so'
++ ;;
++
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
++netbsd*)
++ version_type=sunos
++ need_lib_prefix=no
++ need_version=no
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ dynamic_linker='NetBSD (a.out) ld.so'
++ else
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='NetBSD ld.elf_so'
++ fi
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++
++newsos6)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ ;;
++
++*nto* | *qnx*)
++ version_type=qnx
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='ldqnx.so'
++ ;;
++
++openbsd*)
++ version_type=sunos
++ sys_lib_dlsearch_path_spec="/usr/lib"
++ need_lib_prefix=no
++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++ case $host_os in
++ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++ *) need_version=no ;;
++ esac
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ case $host_os in
++ openbsd2.[89] | openbsd2.[89].*)
++ shlibpath_overrides_runpath=no
++ ;;
++ *)
++ shlibpath_overrides_runpath=yes
++ ;;
++ esac
++ else
++ shlibpath_overrides_runpath=yes
++ fi
++ ;;
++
++os2*)
++ libname_spec='$name'
++ shrext_cmds=".dll"
++ need_lib_prefix=no
++ library_names_spec='$libname${shared_ext} $libname.a'
++ dynamic_linker='OS/2 ld.exe'
++ shlibpath_var=LIBPATH
++ ;;
++
++osf3* | osf4* | osf5*)
++ version_type=osf
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ ;;
++
++rdos*)
++ dynamic_linker=no
++ ;;
++
++solaris*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ # ldd complains unless libraries are executable
++ postinstall_cmds='chmod +x $lib'
++ ;;
++
++sunos4*)
++ version_type=sunos
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ if test "$with_gnu_ld" = yes; then
++ need_lib_prefix=no
++ fi
++ need_version=yes
++ ;;
++
++sysv4 | sysv4.3*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_vendor in
++ sni)
++ shlibpath_overrides_runpath=no
++ need_lib_prefix=no
++ runpath_var=LD_RUN_PATH
++ ;;
++ siemens)
++ need_lib_prefix=no
++ ;;
++ motorola)
++ need_lib_prefix=no
++ need_version=no
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++ ;;
++ esac
++ ;;
++
++sysv4*MP*)
++ if test -d /usr/nec ;then
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++ soname_spec='$libname${shared_ext}.$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ fi
++ ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ version_type=freebsd-elf
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ if test "$with_gnu_ld" = yes; then
++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++ else
++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++ case $host_os in
++ sco3.2v5*)
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++ ;;
++ esac
++ fi
++ sys_lib_dlsearch_path_spec='/usr/lib'
++ ;;
++
++tpf*)
++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++uts4*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
++
++*)
++ dynamic_linker=no
++ ;;
++esac
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
++$as_echo "$dynamic_linker" >&6; }
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
++fi
++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
++fi
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
++$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++hardcode_action=
++if test -n "$hardcode_libdir_flag_spec" ||
++ test -n "$runpath_var" ||
++ test "X$hardcode_automatic" = "Xyes" ; then
++
++ # We can hardcode non-existent directories.
++ if test "$hardcode_direct" != no &&
++ # If the only mechanism to avoid hardcoding is shlibpath_var, we
++ # have to relink, otherwise we might link with an installed library
++ # when we should be linking with a yet-to-be-installed one
++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
++ test "$hardcode_minus_L" != no; then
++ # Linking always hardcodes the temporary library directory.
++ hardcode_action=relink
++ else
++ # We can link without hardcoding, and we can hardcode nonexisting dirs.
++ hardcode_action=immediate
++ fi
++else
++ # We cannot hardcode anything, or else we can only hardcode existing
++ # directories.
++ hardcode_action=unsupported
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
++$as_echo "$hardcode_action" >&6; }
++
++if test "$hardcode_action" = relink ||
++ test "$inherit_rpath" = yes; then
++ # Fast installation is not supported
++ enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++ test "$enable_shared" = no; then
++ # Fast installation is not necessary
++ enable_fast_install=needless
++fi
++
++
++
++
++
++
++ if test "x$enable_dlopen" != xyes; then
++ enable_dlopen=unknown
++ enable_dlopen_self=unknown
++ enable_dlopen_self_static=unknown
++else
++ lt_cv_dlopen=no
++ lt_cv_dlopen_libs=
++
++ case $host_os in
++ beos*)
++ lt_cv_dlopen="load_add_on"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ;;
++
++ mingw* | pw32* | cegcc*)
++ lt_cv_dlopen="LoadLibrary"
++ lt_cv_dlopen_libs=
++ ;;
++
++ cygwin*)
++ lt_cv_dlopen="dlopen"
++ lt_cv_dlopen_libs=
++ ;;
++
++ darwin*)
++ # if libdl is installed we need to link against it
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
++$as_echo_n "checking for dlopen in -ldl... " >&6; }
++if ${ac_cv_lib_dl_dlopen+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dl_dlopen=yes
++else
++ ac_cv_lib_dl_dlopen=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
++$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
++else
++
++ lt_cv_dlopen="dyld"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++
++fi
++
++ ;;
++
++ *)
++ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
++if test "x$ac_cv_func_shl_load" = xyes; then :
++ lt_cv_dlopen="shl_load"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
++$as_echo_n "checking for shl_load in -ldld... " >&6; }
++if ${ac_cv_lib_dld_shl_load+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char shl_load ();
++int
++main ()
++{
++return shl_load ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dld_shl_load=yes
++else
++ ac_cv_lib_dld_shl_load=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
++$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
++if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
++else
++ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
++if test "x$ac_cv_func_dlopen" = xyes; then :
++ lt_cv_dlopen="dlopen"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
++$as_echo_n "checking for dlopen in -ldl... " >&6; }
++if ${ac_cv_lib_dl_dlopen+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dl_dlopen=yes
++else
++ ac_cv_lib_dl_dlopen=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
++$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
++$as_echo_n "checking for dlopen in -lsvld... " >&6; }
++if ${ac_cv_lib_svld_dlopen+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-lsvld $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_svld_dlopen=yes
++else
++ ac_cv_lib_svld_dlopen=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
++$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
++if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
++else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
++$as_echo_n "checking for dld_link in -ldld... " >&6; }
++if ${ac_cv_lib_dld_dld_link+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++/* Override any GCC internal prototype to avoid an error.
++ Use char because int might match the return type of a GCC
++ builtin and then its argument prototype would still apply. */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dld_link ();
++int
++main ()
++{
++return dld_link ();
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_lib_dld_dld_link=yes
++else
++ ac_cv_lib_dld_dld_link=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
++$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
++if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
++fi
++
++
++fi
++
++
++fi
++
++
++fi
++
++
++fi
++
++
++fi
++
++ ;;
++ esac
++
++ if test "x$lt_cv_dlopen" != xno; then
++ enable_dlopen=yes
++ else
++ enable_dlopen=no
++ fi
++
++ case $lt_cv_dlopen in
++ dlopen)
++ save_CPPFLAGS="$CPPFLAGS"
++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++ save_LDFLAGS="$LDFLAGS"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++ save_LIBS="$LIBS"
++ LIBS="$lt_cv_dlopen_libs $LIBS"
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
++$as_echo_n "checking whether a program can dlopen itself... " >&6; }
++if ${lt_cv_dlopen_self+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test "$cross_compiling" = yes; then :
++ lt_cv_dlopen_self=cross
++else
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<_LT_EOF
++#line $LINENO "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
++
++/* When -fvisbility=hidden is used, assume the code has been annotated
++ correspondingly for the symbols needed. */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
++
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else
++ {
++ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else puts (dlerror ());
++ }
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
++
++ return status;
++}
++_LT_EOF
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&5 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
++ esac
++ else :
++ # compilation failed
++ lt_cv_dlopen_self=no
++ fi
++fi
++rm -fr conftest*
++
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
++$as_echo "$lt_cv_dlopen_self" >&6; }
++
++ if test "x$lt_cv_dlopen_self" = xyes; then
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
++$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
++if ${lt_cv_dlopen_self_static+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if test "$cross_compiling" = yes; then :
++ lt_cv_dlopen_self_static=cross
++else
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<_LT_EOF
++#line $LINENO "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
++
++/* When -fvisbility=hidden is used, assume the code has been annotated
++ correspondingly for the symbols needed. */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
++
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else
++ {
++ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else puts (dlerror ());
++ }
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
++
++ return status;
++}
++_LT_EOF
++ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&5 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
++ esac
++ else :
++ # compilation failed
++ lt_cv_dlopen_self_static=no
++ fi
++fi
++rm -fr conftest*
++
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
++$as_echo "$lt_cv_dlopen_self_static" >&6; }
++ fi
++
++ CPPFLAGS="$save_CPPFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++ LIBS="$save_LIBS"
++ ;;
++ esac
++
++ case $lt_cv_dlopen_self in
++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++ *) enable_dlopen_self=unknown ;;
++ esac
++
++ case $lt_cv_dlopen_self_static in
++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++ *) enable_dlopen_self_static=unknown ;;
++ esac
++fi
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++striplib=
++old_striplib=
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
++$as_echo_n "checking whether stripping libraries is possible... " >&6; }
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++ case $host_os in
++ darwin*)
++ if test -n "$STRIP" ; then
++ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++ else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++ fi
++ ;;
++ *)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++ ;;
++ esac
++fi
++
++
++
++
++
++
++
++
++
++
++
++
++ # Report which library types will actually be built
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
++$as_echo_n "checking if libtool supports shared libraries... " >&6; }
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
++$as_echo "$can_build_shared" >&6; }
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
++$as_echo_n "checking whether to build shared libraries... " >&6; }
++ test "$can_build_shared" = "no" && enable_shared=no
++
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++
++ aix[4-9]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
++$as_echo "$enable_shared" >&6; }
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
++$as_echo_n "checking whether to build static libraries... " >&6; }
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
++$as_echo "$enable_static" >&6; }
++
++
++
++
++fi
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++CC="$lt_save_CC"
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++ ac_config_commands="$ac_config_commands libtool"
++
++
++
++
++# Only expand once:
++
++
++
++
++# Checks for header files.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
++$as_echo_n "checking for ANSI C header files... " >&6; }
++if ${ac_cv_header_stdc+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdlib.h>
++#include <stdarg.h>
++#include <string.h>
++#include <float.h>
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_header_stdc=yes
++else
++ ac_cv_header_stdc=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++
++if test $ac_cv_header_stdc = yes; then
++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <string.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "memchr" >/dev/null 2>&1; then :
++
++else
++ ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <stdlib.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "free" >/dev/null 2>&1; then :
++
++else
++ ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
++ if test "$cross_compiling" = yes; then :
++ :
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <ctype.h>
++#include <stdlib.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++ (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
++
++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
++int
++main ()
++{
++ int i;
++ for (i = 0; i < 256; i++)
++ if (XOR (islower (i), ISLOWER (i))
++ || toupper (i) != TOUPPER (i))
++ return 2;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_run "$LINENO"; then :
++
++else
++ ac_cv_header_stdc=no
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++ conftest.$ac_objext conftest.beam conftest.$ac_ext
++fi
++
++fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
++$as_echo "$ac_cv_header_stdc" >&6; }
++if test $ac_cv_header_stdc = yes; then
++
++$as_echo "#define STDC_HEADERS 1" >>confdefs.h
++
++fi
++
++for ac_header in ctype.h limits.h stdlib.h wctype.h
++do :
++ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++
++# Checks for typedefs, structures, and compiler characteristics.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
++$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
++if ${ac_cv_c_const+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++
++int
++main ()
++{
++/* FIXME: Include the comments suggested by Paul. */
++#ifndef __cplusplus
++ /* Ultrix mips cc rejects this. */
++ typedef int charset[2];
++ const charset cs;
++ /* SunOS 4.1.1 cc rejects this. */
++ char const *const *pcpcc;
++ char **ppc;
++ /* NEC SVR4.0.2 mips cc rejects this. */
++ struct point {int x, y;};
++ static struct point const zero = {0,0};
++ /* AIX XL C 1.02.0.0 rejects this.
++ It does not let you subtract one const X* pointer from another in
++ an arm of an if-expression whose if-part is not a constant
++ expression */
++ const char *g = "string";
++ pcpcc = &g + (g ? g-g : 0);
++ /* HPUX 7.0 cc rejects these. */
++ ++pcpcc;
++ ppc = (char**) pcpcc;
++ pcpcc = (char const *const *) ppc;
++ { /* SCO 3.2v4 cc rejects this. */
++ char *t;
++ char const *s = 0 ? (char *) 0 : (char const *) 0;
++
++ *t++ = 0;
++ if (s) return 0;
++ }
++ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
++ int x[] = {25, 17};
++ const int *foo = &x[0];
++ ++foo;
++ }
++ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
++ typedef const int *iptr;
++ iptr p = 0;
++ ++p;
++ }
++ { /* AIX XL C 1.02.0.0 rejects this saying
++ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
++ struct s { int j; const int *ap[3]; };
++ struct s *b; b->j = 5;
++ }
++ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
++ const int foo = 10;
++ if (!foo) return 0;
++ }
++ return !cs[0] && !zero.x;
++#endif
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_c_const=yes
++else
++ ac_cv_c_const=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
++$as_echo "$ac_cv_c_const" >&6; }
++if test $ac_cv_c_const = no; then
++
++$as_echo "#define const /**/" >>confdefs.h
++
++fi
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
++$as_echo_n "checking for inline... " >&6; }
++if ${ac_cv_c_inline+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_cv_c_inline=no
++for ac_kw in inline __inline__ __inline; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#ifndef __cplusplus
++typedef int foo_t;
++static $ac_kw foo_t static_foo () {return 0; }
++$ac_kw foo_t foo () {return 0; }
++#endif
++
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_c_inline=$ac_kw
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ test "$ac_cv_c_inline" != no && break
++done
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
++$as_echo "$ac_cv_c_inline" >&6; }
++
++case $ac_cv_c_inline in
++ inline | yes) ;;
++ *)
++ case $ac_cv_c_inline in
++ no) ac_val=;;
++ *) ac_val=$ac_cv_c_inline;;
++ esac
++ cat >>confdefs.h <<_ACEOF
++#ifndef __cplusplus
++#define inline $ac_val
++#endif
++_ACEOF
++ ;;
++esac
++
++ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default"
++if test "x$ac_cv_type_mode_t" = xyes; then :
++
++else
++
++cat >>confdefs.h <<_ACEOF
++#define mode_t int
++_ACEOF
++
++fi
++
++ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default"
++if test "x$ac_cv_type_off_t" = xyes; then :
++
++else
++
++cat >>confdefs.h <<_ACEOF
++#define off_t long int
++_ACEOF
++
++fi
++
++ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
++if test "x$ac_cv_type_size_t" = xyes; then :
++
++else
++
++cat >>confdefs.h <<_ACEOF
++#define size_t unsigned int
++_ACEOF
++
++fi
++
++# The cast to long int works around a bug in the HP C Compiler
++# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
++# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
++# This bug is HP SR number 8606223364.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of off_t" >&5
++$as_echo_n "checking size of off_t... " >&6; }
++if ${ac_cv_sizeof_off_t+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (off_t))" "ac_cv_sizeof_off_t" "$ac_includes_default"; then :
++
++else
++ if test "$ac_cv_type_off_t" = yes; then
++ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error 77 "cannot compute sizeof (off_t)
++See \`config.log' for more details" "$LINENO" 5; }
++ else
++ ac_cv_sizeof_off_t=0
++ fi
++fi
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_off_t" >&5
++$as_echo "$ac_cv_sizeof_off_t" >&6; }
++
++
++
++cat >>confdefs.h <<_ACEOF
++#define SIZEOF_OFF_T $ac_cv_sizeof_off_t
++_ACEOF
++
++
++for ac_func in tolower towlower
++do :
++ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
++ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
++if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
++ cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++done
++
++
++# largefile support
++# Check whether --enable-largefile was given.
++if test "${enable_largefile+set}" = set; then :
++ enableval=$enable_largefile;
++fi
++
++if test "$enable_largefile" != no; then
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
++$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
++if ${ac_cv_sys_largefile_CC+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ ac_cv_sys_largefile_CC=no
++ if test "$GCC" != yes; then
++ ac_save_CC=$CC
++ while :; do
++ # IRIX 6.2 and later do not support large files by default,
++ # so use the C compiler's -n32 option if that helps.
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <sys/types.h>
++ /* Check that off_t can represent 2**63 - 1 correctly.
++ We can't simply define LARGE_OFF_T to be 9223372036854775807,
++ since some C++ compilers masquerading as C compilers
++ incorrectly reject 9223372036854775807. */
++#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
++ && LARGE_OFF_T % 2147483647 == 1)
++ ? 1 : -1];
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ if ac_fn_c_try_compile "$LINENO"; then :
++ break
++fi
++rm -f core conftest.err conftest.$ac_objext
++ CC="$CC -n32"
++ if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_sys_largefile_CC=' -n32'; break
++fi
++rm -f core conftest.err conftest.$ac_objext
++ break
++ done
++ CC=$ac_save_CC
++ rm -f conftest.$ac_ext
++ fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
++$as_echo "$ac_cv_sys_largefile_CC" >&6; }
++ if test "$ac_cv_sys_largefile_CC" != no; then
++ CC=$CC$ac_cv_sys_largefile_CC
++ fi
++
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
++$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
++if ${ac_cv_sys_file_offset_bits+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <sys/types.h>
++ /* Check that off_t can represent 2**63 - 1 correctly.
++ We can't simply define LARGE_OFF_T to be 9223372036854775807,
++ since some C++ compilers masquerading as C compilers
++ incorrectly reject 9223372036854775807. */
++#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
++ && LARGE_OFF_T % 2147483647 == 1)
++ ? 1 : -1];
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_sys_file_offset_bits=no; break
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#define _FILE_OFFSET_BITS 64
++#include <sys/types.h>
++ /* Check that off_t can represent 2**63 - 1 correctly.
++ We can't simply define LARGE_OFF_T to be 9223372036854775807,
++ since some C++ compilers masquerading as C compilers
++ incorrectly reject 9223372036854775807. */
++#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
++ && LARGE_OFF_T % 2147483647 == 1)
++ ? 1 : -1];
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_sys_file_offset_bits=64; break
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ac_cv_sys_file_offset_bits=unknown
++ break
++done
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
++$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
++case $ac_cv_sys_file_offset_bits in #(
++ no | unknown) ;;
++ *)
++cat >>confdefs.h <<_ACEOF
++#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
++_ACEOF
++;;
++esac
++rm -rf conftest*
++ if test $ac_cv_sys_file_offset_bits = unknown; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
++$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
++if ${ac_cv_sys_large_files+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <sys/types.h>
++ /* Check that off_t can represent 2**63 - 1 correctly.
++ We can't simply define LARGE_OFF_T to be 9223372036854775807,
++ since some C++ compilers masquerading as C compilers
++ incorrectly reject 9223372036854775807. */
++#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
++ && LARGE_OFF_T % 2147483647 == 1)
++ ? 1 : -1];
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_sys_large_files=no; break
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#define _LARGE_FILES 1
++#include <sys/types.h>
++ /* Check that off_t can represent 2**63 - 1 correctly.
++ We can't simply define LARGE_OFF_T to be 9223372036854775807,
++ since some C++ compilers masquerading as C compilers
++ incorrectly reject 9223372036854775807. */
++#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
++ && LARGE_OFF_T % 2147483647 == 1)
++ ? 1 : -1];
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++ ac_cv_sys_large_files=1; break
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ ac_cv_sys_large_files=unknown
++ break
++done
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
++$as_echo "$ac_cv_sys_large_files" >&6; }
++case $ac_cv_sys_large_files in #(
++ no | unknown) ;;
++ *)
++cat >>confdefs.h <<_ACEOF
++#define _LARGE_FILES $ac_cv_sys_large_files
++_ACEOF
++;;
++esac
++rm -rf conftest*
++ fi
++fi
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGEFILE_SOURCE value needed for large files" >&5
++$as_echo_n "checking for _LARGEFILE_SOURCE value needed for large files... " >&6; }
++if ${ac_cv_sys_largefile_source+:} false; then :
++ $as_echo_n "(cached) " >&6
++else
++ while :; do
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#include <sys/types.h> /* for off_t */
++ #include <stdio.h>
++int
++main ()
++{
++int (*fp) (FILE *, off_t, int) = fseeko;
++ return fseeko (stdin, 0, 0) && fp (stdin, 0, 0);
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_sys_largefile_source=no; break
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h. */
++#define _LARGEFILE_SOURCE 1
++#include <sys/types.h> /* for off_t */
++ #include <stdio.h>
++int
++main ()
++{
++int (*fp) (FILE *, off_t, int) = fseeko;
++ return fseeko (stdin, 0, 0) && fp (stdin, 0, 0);
++ ;
++ return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++ ac_cv_sys_largefile_source=1; break
++fi
++rm -f core conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
++ ac_cv_sys_largefile_source=unknown
++ break
++done
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_source" >&5
++$as_echo "$ac_cv_sys_largefile_source" >&6; }
++case $ac_cv_sys_largefile_source in #(
++ no | unknown) ;;
++ *)
++cat >>confdefs.h <<_ACEOF
++#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
++_ACEOF
++;;
++esac
++rm -rf conftest*
++
++# We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
++# in glibc 2.1.3, but that breaks too many other things.
++# If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
++if test $ac_cv_sys_largefile_source != unknown; then
++
++$as_echo "#define HAVE_FSEEKO 1" >>confdefs.h
++
++fi
++
++
++# Checks for library functions.
++ac_config_files="$ac_config_files Makefile doc/Makefile doc/Doxyfile libmspack.pc"
++
++cat >confcache <<\_ACEOF
++# This file is a shell script that caches the results of configure
++# tests run on this system so they can be shared between configure
++# scripts and configure runs, see configure's option --config-cache.
++# It is not useful on other systems. If it contains results you don't
++# want to keep, you may remove or edit it.
++#
++# config.status only pays attention to the cache file if you give it
++# the --recheck option to rerun configure.
++#
++# `ac_cv_env_foo' variables (set or unset) will be overridden when
++# loading this file, other *unset* `ac_cv_foo' will be assigned the
++# following values.
++
++_ACEOF
++
++# The following way of writing the cache mishandles newlines in values,
++# but we know of no workaround that is simple, portable, and efficient.
++# So, we kill variables containing newlines.
++# Ultrix sh set writes to stderr and can't be redirected directly,
++# and sets the high bit in the cache file unless we assign to the vars.
++(
++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
++ eval ac_val=\$$ac_var
++ case $ac_val in #(
++ *${as_nl}*)
++ case $ac_var in #(
++ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
++$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
++ esac
++ case $ac_var in #(
++ _ | IFS | as_nl) ;; #(
++ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
++ *) { eval $ac_var=; unset $ac_var;} ;;
++ esac ;;
++ esac
++ done
++
++ (set) 2>&1 |
++ case $as_nl`(ac_space=' '; set) 2>&1` in #(
++ *${as_nl}ac_space=\ *)
++ # `set' does not quote correctly, so add quotes: double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \.
++ sed -n \
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ ;; #(
++ *)
++ # `set' quotes correctly as required by POSIX, so do not add quotes.
++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
++ ;;
++ esac |
++ sort
++) |
++ sed '
++ /^ac_cv_env_/b end
++ t clear
++ :clear
++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
++ t end
++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
++ :end' >>confcache
++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
++ if test -w "$cache_file"; then
++ if test "x$cache_file" != "x/dev/null"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
++$as_echo "$as_me: updating cache $cache_file" >&6;}
++ if test ! -f "$cache_file" || test -h "$cache_file"; then
++ cat confcache >"$cache_file"
++ else
++ case $cache_file in #(
++ */* | ?:*)
++ mv -f confcache "$cache_file"$$ &&
++ mv -f "$cache_file"$$ "$cache_file" ;; #(
++ *)
++ mv -f confcache "$cache_file" ;;
++ esac
++ fi
++ fi
++ else
++ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
++$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
++ fi
++fi
++rm -f confcache
++
++test "x$prefix" = xNONE && prefix=$ac_default_prefix
++# Let make expand exec_prefix.
++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
++
++DEFS=-DHAVE_CONFIG_H
++
++ac_libobjs=
++ac_ltlibobjs=
++U=
++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
++ # 1. Remove the extension, and $U if already installed.
++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
++ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
++ # will be set to the directory where LIBOBJS objects are built.
++ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
++ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
++done
++LIBOBJS=$ac_libobjs
++
++LTLIBOBJS=$ac_ltlibobjs
++
++
++ if test -n "$EXEEXT"; then
++ am__EXEEXT_TRUE=
++ am__EXEEXT_FALSE='#'
++else
++ am__EXEEXT_TRUE='#'
++ am__EXEEXT_FALSE=
++fi
++
++if test -z "${DEBUG_TRUE}" && test -z "${DEBUG_FALSE}"; then
++ as_fn_error $? "conditional \"DEBUG\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
++ as_fn_error $? "conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
++ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${GCC_TRUE}" && test -z "${GCC_FALSE}"; then
++ as_fn_error $? "conditional \"GCC\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++
++: "${CONFIG_STATUS=./config.status}"
++ac_write_fail=0
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
++$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
++as_write_fail=0
++cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++# Run this file to recreate the current configuration.
++# Compiler output produced by configure, useful for debugging
++# configure, is in config.log if it exists.
++
++debug=false
++ac_cs_recheck=false
++ac_cs_silent=false
++
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
++## -------------------- ##
++## M4sh Initialization. ##
++## -------------------- ##
++
++# Be more Bourne compatible
++DUALCASE=1; export DUALCASE # for MKS sh
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
++ emulate sh
++ NULLCMD=:
++ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in #(
++ *posix*) :
++ set -o posix ;; #(
++ *) :
++ ;;
++esac
++fi
++
++
++as_nl='
++'
++export as_nl
++# Printing a long string crashes Solaris 7 /usr/bin/printf.
++as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
++as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
++# Prefer a ksh shell builtin over an external printf program on Solaris,
++# but without wasting forks for bash or zsh.
++if test -z "$BASH_VERSION$ZSH_VERSION" \
++ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='print -r --'
++ as_echo_n='print -rn --'
++elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
++ as_echo='printf %s\n'
++ as_echo_n='printf %s'
++else
++ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
++ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
++ as_echo_n='/usr/ucb/echo -n'
++ else
++ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
++ as_echo_n_body='eval
++ arg=$1;
++ case $arg in #(
++ *"$as_nl"*)
++ expr "X$arg" : "X\\(.*\\)$as_nl";
++ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
++ esac;
++ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
++ '
++ export as_echo_n_body
++ as_echo_n='sh -c $as_echo_n_body as_echo'
++ fi
++ export as_echo_body
++ as_echo='sh -c $as_echo_body as_echo'
++fi
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ PATH_SEPARATOR=:
++ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
++ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
++ PATH_SEPARATOR=';'
++ }
++fi
++
++
++# IFS
++# We need space, tab and new line, in precisely that order. Quoting is
++# there to prevent editors from complaining about space-tab.
++# (If _AS_PATH_WALK were called with IFS unset, it would disable word
++# splitting by setting IFS to empty value.)
++IFS=" "" $as_nl"
++
++# Find who we are. Look in the path if we contain no directory separator.
++as_myself=
++case $0 in #((
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++ done
++IFS=$as_save_IFS
++
++ ;;
++esac
++# We did not find ourselves, most probably we were run as `sh COMMAND'
++# in which case we are not to be found in the path.
++if test "x$as_myself" = x; then
++ as_myself=$0
++fi
++if test ! -f "$as_myself"; then
++ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
++ exit 1
++fi
++
++# Unset variables that we do not need and which cause bugs (e.g. in
++# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
++# suppresses any "Segmentation fault" message there. '((' could
++# trigger a bug in pdksh 5.2.14.
++for as_var in BASH_ENV ENV MAIL MAILPATH
++do eval test x\${$as_var+set} = xset \
++ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
++done
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++LC_ALL=C
++export LC_ALL
++LANGUAGE=C
++export LANGUAGE
++
++# CDPATH.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++
++# as_fn_error STATUS ERROR [LINENO LOG_FD]
++# ----------------------------------------
++# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
++# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
++# script with STATUS, using 1 if that was 0.
++as_fn_error ()
++{
++ as_status=$1; test $as_status -eq 0 && as_status=1
++ if test "$4"; then
++ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
++ fi
++ $as_echo "$as_me: error: $2" >&2
++ as_fn_exit $as_status
++} # as_fn_error
++
++
++# as_fn_set_status STATUS
++# -----------------------
++# Set $? to STATUS, without forking.
++as_fn_set_status ()
++{
++ return $1
++} # as_fn_set_status
++
++# as_fn_exit STATUS
++# -----------------
++# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
++as_fn_exit ()
++{
++ set +e
++ as_fn_set_status $1
++ exit $1
++} # as_fn_exit
++
++# as_fn_unset VAR
++# ---------------
++# Portably unset VAR.
++as_fn_unset ()
++{
++ { eval $1=; unset $1;}
++}
++as_unset=as_fn_unset
++# as_fn_append VAR VALUE
++# ----------------------
++# Append the text in VALUE to the end of the definition contained in VAR. Take
++# advantage of any shell optimizations that allow amortized linear growth over
++# repeated appends, instead of the typical quadratic growth present in naive
++# implementations.
++if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
++ eval 'as_fn_append ()
++ {
++ eval $1+=\$2
++ }'
++else
++ as_fn_append ()
++ {
++ eval $1=\$$1\$2
++ }
++fi # as_fn_append
++
++# as_fn_arith ARG...
++# ------------------
++# Perform arithmetic evaluation on the ARGs, and store the result in the
++# global $as_val. Take advantage of shells that can avoid forks. The arguments
++# must be portable across $(()) and expr.
++if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
++ eval 'as_fn_arith ()
++ {
++ as_val=$(( $* ))
++ }'
++else
++ as_fn_arith ()
++ {
++ as_val=`expr "$@" || test $? -eq 1`
++ }
++fi # as_fn_arith
++
++
++if expr a : '\(a\)' >/dev/null 2>&1 &&
++ test "X`expr 00001 : '.*\(...\)'`" = X001; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
++ as_dirname=dirname
++else
++ as_dirname=false
++fi
++
++as_me=`$as_basename -- "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\/\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++ECHO_C= ECHO_N= ECHO_T=
++case `echo -n x` in #(((((
++-n*)
++ case `echo 'xy\c'` in
++ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
++ xy) ECHO_C='\c';;
++ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
++ ECHO_T=' ';;
++ esac;;
++*)
++ ECHO_N='-n';;
++esac
++
++rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++ rm -f conf$$.dir/conf$$.file
++else
++ rm -f conf$$.dir
++ mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++ if ln -s conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s='ln -s'
++ # ... but there are two gotchas:
++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++ # In both cases, we have to default to `cp -p'.
++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++ as_ln_s='cp -p'
++ elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++ else
++ as_ln_s='cp -p'
++ fi
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++
++
++# as_fn_mkdir_p
++# -------------
++# Create "$as_dir" as a directory, including parents if necessary.
++as_fn_mkdir_p ()
++{
++
++ case $as_dir in #(
++ -*) as_dir=./$as_dir;;
++ esac
++ test -d "$as_dir" || eval $as_mkdir_p || {
++ as_dirs=
++ while :; do
++ case $as_dir in #(
++ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
++ *) as_qdir=$as_dir;;
++ esac
++ as_dirs="'$as_qdir' $as_dirs"
++ as_dir=`$as_dirname -- "$as_dir" ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ test -d "$as_dir" && break
++ done
++ test -z "$as_dirs" || eval "mkdir $as_dirs"
++ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
++
++
++} # as_fn_mkdir_p
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p='mkdir -p "$as_dir"'
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++if test -x / >/dev/null 2>&1; then
++ as_test_x='test -x'
++else
++ if ls -dL / >/dev/null 2>&1; then
++ as_ls_L_option=L
++ else
++ as_ls_L_option=
++ fi
++ as_test_x='
++ eval sh -c '\''
++ if test -d "$1"; then
++ test -d "$1/.";
++ else
++ case $1 in #(
++ -*)set "./$1";;
++ esac;
++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
++ ???[sx]*):;;*)false;;esac;fi
++ '\'' sh
++ '
++fi
++as_executable_p=$as_test_x
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++exec 6>&1
++## ----------------------------------- ##
++## Main body of $CONFIG_STATUS script. ##
++## ----------------------------------- ##
++_ASEOF
++test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# Save the log message, to keep $0 and so on meaningful, and to
++# report actual input values of CONFIG_FILES etc. instead of their
++# values after options handling.
++ac_log="
++This file was extended by libmspack $as_me 0.4alpha, which was
++generated by GNU Autoconf 2.68. Invocation command line was
++
++ CONFIG_FILES = $CONFIG_FILES
++ CONFIG_HEADERS = $CONFIG_HEADERS
++ CONFIG_LINKS = $CONFIG_LINKS
++ CONFIG_COMMANDS = $CONFIG_COMMANDS
++ $ $0 $@
++
++on `(hostname || uname -n) 2>/dev/null | sed 1q`
++"
++
++_ACEOF
++
++case $ac_config_files in *"
++"*) set x $ac_config_files; shift; ac_config_files=$*;;
++esac
++
++case $ac_config_headers in *"
++"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
++esac
++
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++# Files that config.status was made for.
++config_files="$ac_config_files"
++config_headers="$ac_config_headers"
++config_commands="$ac_config_commands"
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++ac_cs_usage="\
++\`$as_me' instantiates files and other configuration actions
++from templates according to the current configuration. Unless the files
++and actions are specified as TAGs, all are instantiated by default.
++
++Usage: $0 [OPTION]... [TAG]...
++
++ -h, --help print this help, then exit
++ -V, --version print version number and configuration settings, then exit
++ --config print configuration, then exit
++ -q, --quiet, --silent
++ do not print progress messages
++ -d, --debug don't remove temporary files
++ --recheck update $as_me by reconfiguring in the same conditions
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
++ --header=FILE[:TEMPLATE]
++ instantiate the configuration header FILE
++
++Configuration files:
++$config_files
++
++Configuration headers:
++$config_headers
++
++Configuration commands:
++$config_commands
++
++Report bugs to <kyzer at 4u.net>."
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
++ac_cs_version="\\
++libmspack config.status 0.4alpha
++configured by $0, generated by GNU Autoconf 2.68,
++ with options \\"\$ac_cs_config\\"
++
++Copyright (C) 2010 Free Software Foundation, Inc.
++This config.status script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it."
++
++ac_pwd='$ac_pwd'
++srcdir='$srcdir'
++INSTALL='$INSTALL'
++MKDIR_P='$MKDIR_P'
++AWK='$AWK'
++test -n "\$AWK" || AWK=awk
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# The default lists apply if the user does not specify any file.
++ac_need_defaults=:
++while test $# != 0
++do
++ case $1 in
++ --*=?*)
++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
++ ac_shift=:
++ ;;
++ --*=)
++ ac_option=`expr "X$1" : 'X\([^=]*\)='`
++ ac_optarg=
++ ac_shift=:
++ ;;
++ *)
++ ac_option=$1
++ ac_optarg=$2
++ ac_shift=shift
++ ;;
++ esac
++
++ case $ac_option in
++ # Handling of the options.
++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
++ ac_cs_recheck=: ;;
++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
++ $as_echo "$ac_cs_version"; exit ;;
++ --config | --confi | --conf | --con | --co | --c )
++ $as_echo "$ac_cs_config"; exit ;;
++ --debug | --debu | --deb | --de | --d | -d )
++ debug=: ;;
++ --file | --fil | --fi | --f )
++ $ac_shift
++ case $ac_optarg in
++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ '') as_fn_error $? "missing file argument" ;;
++ esac
++ as_fn_append CONFIG_FILES " '$ac_optarg'"
++ ac_need_defaults=false;;
++ --header | --heade | --head | --hea )
++ $ac_shift
++ case $ac_optarg in
++ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
++ ac_need_defaults=false;;
++ --he | --h)
++ # Conflict between --help and --header
++ as_fn_error $? "ambiguous option: \`$1'
++Try \`$0 --help' for more information.";;
++ --help | --hel | -h )
++ $as_echo "$ac_cs_usage"; exit ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
++ ac_cs_silent=: ;;
++
++ # This is an error.
++ -*) as_fn_error $? "unrecognized option: \`$1'
++Try \`$0 --help' for more information." ;;
++
++ *) as_fn_append ac_config_targets " $1"
++ ac_need_defaults=false ;;
++
++ esac
++ shift
++done
++
++ac_configure_extra_args=
++
++if $ac_cs_silent; then
++ exec 6>/dev/null
++ ac_configure_extra_args="$ac_configure_extra_args --silent"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++if \$ac_cs_recheck; then
++ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++ shift
++ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
++ CONFIG_SHELL='$SHELL'
++ export CONFIG_SHELL
++ exec "\$@"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++exec 5>>config.log
++{
++ echo
++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
++## Running $as_me. ##
++_ASBOX
++ $as_echo "$ac_log"
++} >&5
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++#
++# INIT-COMMANDS
++#
++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
++
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++sed_quote_subst='$sed_quote_subst'
++double_quote_subst='$double_quote_subst'
++delay_variable_subst='$delay_variable_subst'
++macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
++macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
++enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
++enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
++pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
++enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
++SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
++ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
++PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
++host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
++host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
++host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
++build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
++build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
++build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
++SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
++Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
++GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
++EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
++FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
++LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
++NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
++LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
++max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
++ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
++exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
++lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
++lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
++lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
++lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
++reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
++reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
++OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
++deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
++file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
++file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
++want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
++DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
++sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
++AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
++AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
++archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
++STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
++RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
++old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
++old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
++old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
++lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
++CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
++CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
++compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
++GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
++lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
++nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
++lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
++objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
++MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
++lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
++lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
++need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
++MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
++DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
++NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
++LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
++OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
++OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
++libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
++shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
++extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
++archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
++enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
++export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
++whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
++compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
++old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
++old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
++archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
++archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
++module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
++module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
++with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
++allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
++no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
++hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
++hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
++hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
++hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
++hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
++hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
++hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
++inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
++link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
++always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
++export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
++exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
++include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
++prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
++postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
++file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
++variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
++need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
++need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
++version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
++runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
++shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
++shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
++libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
++library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
++soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
++install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
++postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
++postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
++finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
++finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
++hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
++sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
++sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
++hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
++enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
++enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
++enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
++old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
++striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
++
++LTCC='$LTCC'
++LTCFLAGS='$LTCFLAGS'
++compiler='$compiler_DEFAULT'
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++\$1
++_LTECHO_EOF'
++}
++
++# Quote evaled strings.
++for var in SHELL \
++ECHO \
++PATH_SEPARATOR \
++SED \
++GREP \
++EGREP \
++FGREP \
++LD \
++NM \
++LN_S \
++lt_SP2NL \
++lt_NL2SP \
++reload_flag \
++OBJDUMP \
++deplibs_check_method \
++file_magic_cmd \
++file_magic_glob \
++want_nocaseglob \
++DLLTOOL \
++sharedlib_from_linklib_cmd \
++AR \
++AR_FLAGS \
++archiver_list_spec \
++STRIP \
++RANLIB \
++CC \
++CFLAGS \
++compiler \
++lt_cv_sys_global_symbol_pipe \
++lt_cv_sys_global_symbol_to_cdecl \
++lt_cv_sys_global_symbol_to_c_name_address \
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
++nm_file_list_spec \
++lt_prog_compiler_no_builtin_flag \
++lt_prog_compiler_pic \
++lt_prog_compiler_wl \
++lt_prog_compiler_static \
++lt_cv_prog_compiler_c_o \
++need_locks \
++MANIFEST_TOOL \
++DSYMUTIL \
++NMEDIT \
++LIPO \
++OTOOL \
++OTOOL64 \
++shrext_cmds \
++export_dynamic_flag_spec \
++whole_archive_flag_spec \
++compiler_needs_object \
++with_gnu_ld \
++allow_undefined_flag \
++no_undefined_flag \
++hardcode_libdir_flag_spec \
++hardcode_libdir_separator \
++exclude_expsyms \
++include_expsyms \
++file_list_spec \
++variables_saved_for_relink \
++libname_spec \
++library_names_spec \
++soname_spec \
++install_override_mode \
++finish_eval \
++old_striplib \
++striplib; do
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
++ *[\\\\\\\`\\"\\\$]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++ ;;
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++ ;;
++ esac
++done
++
++# Double-quote double-evaled strings.
++for var in reload_cmds \
++old_postinstall_cmds \
++old_postuninstall_cmds \
++old_archive_cmds \
++extract_expsyms_cmds \
++old_archive_from_new_cmds \
++old_archive_from_expsyms_cmds \
++archive_cmds \
++archive_expsym_cmds \
++module_cmds \
++module_expsym_cmds \
++export_symbols_cmds \
++prelink_cmds \
++postlink_cmds \
++postinstall_cmds \
++postuninstall_cmds \
++finish_cmds \
++sys_lib_search_path_spec \
++sys_lib_dlsearch_path_spec; do
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
++ *[\\\\\\\`\\"\\\$]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++ ;;
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++ ;;
++ esac
++done
++
++ac_aux_dir='$ac_aux_dir'
++xsi_shell='$xsi_shell'
++lt_shell_append='$lt_shell_append'
++
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes INIT.
++if test -n "\${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
++
++
++ PACKAGE='$PACKAGE'
++ VERSION='$VERSION'
++ TIMESTAMP='$TIMESTAMP'
++ RM='$RM'
++ ofile='$ofile'
++
++
++
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++
++# Handling of arguments.
++for ac_config_target in $ac_config_targets
++do
++ case $ac_config_target in
++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
++ "doc/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/Doxyfile" ;;
++ "libmspack.pc") CONFIG_FILES="$CONFIG_FILES libmspack.pc" ;;
++
++ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
++ esac
++done
++
++
++# If the user did not use the arguments to specify the items to instantiate,
++# then the envvar interface is used. Set only those that are not.
++# We use the long form for the default assignment because of an extremely
++# bizarre bug on SunOS 4.1.3.
++if $ac_need_defaults; then
++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
++fi
++
++# Have a temporary directory for convenience. Make it in the build tree
++# simply because there is no reason against having it here, and in addition,
++# creating and moving files from /tmp can sometimes cause problems.
++# Hook for its removal unless debugging.
++# Note that there is a small window in which the directory will not be cleaned:
++# after its creation but before its name has been assigned to `$tmp'.
++$debug ||
++{
++ tmp= ac_tmp=
++ trap 'exit_status=$?
++ : "${ac_tmp:=$tmp}"
++ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
++' 0
++ trap 'as_fn_exit 1' 1 2 13 15
++}
++# Create a (secure) tmp directory for tmp files.
++
++{
++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
++ test -d "$tmp"
++} ||
++{
++ tmp=./conf$$-$RANDOM
++ (umask 077 && mkdir "$tmp")
++} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
++ac_tmp=$tmp
++
++# Set up the scripts for CONFIG_FILES section.
++# No need to generate them if there are no CONFIG_FILES.
++# This happens for instance with `./config.status config.h'.
++if test -n "$CONFIG_FILES"; then
++
++
++ac_cr=`echo X | tr X '\015'`
++# On cygwin, bash can eat \r inside `` if the user requested igncr.
++# But we know of no other shell where ac_cr would be empty at this
++# point, so we can use a bashism as a fallback.
++if test "x$ac_cr" = x; then
++ eval ac_cr=\$\'\\r\'
++fi
++ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
++if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
++ ac_cs_awk_cr='\\r'
++else
++ ac_cs_awk_cr=$ac_cr
++fi
++
++echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
++_ACEOF
++
++
++{
++ echo "cat >conf$$subs.awk <<_ACEOF" &&
++ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
++ echo "_ACEOF"
++} >conf$$subs.sh ||
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
++ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
++ac_delim='%!_!# '
++for ac_last_try in false false false false false :; do
++ . ./conf$$subs.sh ||
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
++
++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
++ if test $ac_delim_n = $ac_delim_num; then
++ break
++ elif $ac_last_try; then
++ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
++ else
++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
++ fi
++done
++rm -f conf$$subs.sh
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
++_ACEOF
++sed -n '
++h
++s/^/S["/; s/!.*/"]=/
++p
++g
++s/^[^!]*!//
++:repl
++t repl
++s/'"$ac_delim"'$//
++t delim
++:nl
++h
++s/\(.\{148\}\)..*/\1/
++t more1
++s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
++p
++n
++b repl
++:more1
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t nl
++:delim
++h
++s/\(.\{148\}\)..*/\1/
++t more2
++s/["\\]/\\&/g; s/^/"/; s/$/"/
++p
++b
++:more2
++s/["\\]/\\&/g; s/^/"/; s/$/"\\/
++p
++g
++s/.\{148\}//
++t delim
++' <conf$$subs.awk | sed '
++/^[^""]/{
++ N
++ s/\n//
++}
++' >>$CONFIG_STATUS || ac_write_fail=1
++rm -f conf$$subs.awk
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++_ACAWK
++cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
++ for (key in S) S_is_set[key] = 1
++ FS = ""
++
++}
++{
++ line = $ 0
++ nfields = split(line, field, "@")
++ substed = 0
++ len = length(field[1])
++ for (i = 2; i < nfields; i++) {
++ key = field[i]
++ keylen = length(key)
++ if (S_is_set[key]) {
++ value = S[key]
++ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
++ len += length(value) + length(field[++i])
++ substed = 1
++ } else
++ len += 1 + keylen
++ }
++
++ print line
++}
++
++_ACAWK
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
++ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
++else
++ cat
++fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
++ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
++_ACEOF
++
++# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
++# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
++# trailing colons and then remove the whole line if VPATH becomes empty
++# (actually we leave an empty line to preserve line numbers).
++if test "x$srcdir" = x.; then
++ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
++h
++s///
++s/^/:/
++s/[ ]*$/:/
++s/:\$(srcdir):/:/g
++s/:\${srcdir}:/:/g
++s/:@srcdir@:/:/g
++s/^:*//
++s/:*$//
++x
++s/\(=[ ]*\).*/\1/
++G
++s/\n//
++s/^[^=]*=[ ]*$//
++}'
++fi
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++fi # test -n "$CONFIG_FILES"
++
++# Set up the scripts for CONFIG_HEADERS section.
++# No need to generate them if there are no CONFIG_HEADERS.
++# This happens for instance with `./config.status Makefile'.
++if test -n "$CONFIG_HEADERS"; then
++cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
++BEGIN {
++_ACEOF
++
++# Transform confdefs.h into an awk script `defines.awk', embedded as
++# here-document in config.status, that substitutes the proper values into
++# config.h.in to produce config.h.
++
++# Create a delimiter string that does not exist in confdefs.h, to ease
++# handling of long lines.
++ac_delim='%!_!# '
++for ac_last_try in false false :; do
++ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
++ if test -z "$ac_tt"; then
++ break
++ elif $ac_last_try; then
++ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
++ else
++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
++ fi
++done
++
++# For the awk script, D is an array of macro values keyed by name,
++# likewise P contains macro parameters if any. Preserve backslash
++# newline sequences.
++
++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
++sed -n '
++s/.\{148\}/&'"$ac_delim"'/g
++t rset
++:rset
++s/^[ ]*#[ ]*define[ ][ ]*/ /
++t def
++d
++:def
++s/\\$//
++t bsnl
++s/["\\]/\\&/g
++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
++D["\1"]=" \3"/p
++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
++d
++:bsnl
++s/["\\]/\\&/g
++s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
++D["\1"]=" \3\\\\\\n"\\/p
++t cont
++s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
++t cont
++d
++:cont
++n
++s/.\{148\}/&'"$ac_delim"'/g
++t clear
++:clear
++s/\\$//
++t bsnlc
++s/["\\]/\\&/g; s/^/"/; s/$/"/p
++d
++:bsnlc
++s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
++b cont
++' <confdefs.h | sed '
++s/'"$ac_delim"'/"\\\
++"/g' >>$CONFIG_STATUS || ac_write_fail=1
++
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ for (key in D) D_is_set[key] = 1
++ FS = ""
++}
++/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
++ line = \$ 0
++ split(line, arg, " ")
++ if (arg[1] == "#") {
++ defundef = arg[2]
++ mac1 = arg[3]
++ } else {
++ defundef = substr(arg[1], 2)
++ mac1 = arg[2]
++ }
++ split(mac1, mac2, "(") #)
++ macro = mac2[1]
++ prefix = substr(line, 1, index(line, defundef) - 1)
++ if (D_is_set[macro]) {
++ # Preserve the white space surrounding the "#".
++ print prefix "define", macro P[macro] D[macro]
++ next
++ } else {
++ # Replace #undef with comments. This is necessary, for example,
++ # in the case of _POSIX_SOURCE, which is predefined and required
++ # on some systems where configure will not decide to define it.
++ if (defundef == "undef") {
++ print "/*", prefix defundef, macro, "*/"
++ next
++ }
++ }
++}
++{ print }
++_ACAWK
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
++fi # test -n "$CONFIG_HEADERS"
++
++
++eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
++shift
++for ac_tag
++do
++ case $ac_tag in
++ :[FHLC]) ac_mode=$ac_tag; continue;;
++ esac
++ case $ac_mode$ac_tag in
++ :[FHL]*:*);;
++ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
++ :[FH]-) ac_tag=-:-;;
++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
++ esac
++ ac_save_IFS=$IFS
++ IFS=:
++ set x $ac_tag
++ IFS=$ac_save_IFS
++ shift
++ ac_file=$1
++ shift
++
++ case $ac_mode in
++ :L) ac_source=$1;;
++ :[FH])
++ ac_file_inputs=
++ for ac_f
++ do
++ case $ac_f in
++ -) ac_f="$ac_tmp/stdin";;
++ *) # Look for the file first in the build tree, then in the source tree
++ # (if the path is not absolute). The absolute path cannot be DOS-style,
++ # because $ac_f cannot contain `:'.
++ test -f "$ac_f" ||
++ case $ac_f in
++ [\\/$]*) false;;
++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
++ esac ||
++ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
++ esac
++ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
++ as_fn_append ac_file_inputs " '$ac_f'"
++ done
++
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated by config.status. */
++ configure_input='Generated from '`
++ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
++ `' by configure.'
++ if test x"$ac_file" != x-; then
++ configure_input="$ac_file. $configure_input"
++ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
++$as_echo "$as_me: creating $ac_file" >&6;}
++ fi
++ # Neutralize special characters interpreted by sed in replacement strings.
++ case $configure_input in #(
++ *\&* | *\|* | *\\* )
++ ac_sed_conf_input=`$as_echo "$configure_input" |
++ sed 's/[\\\\&|]/\\\\&/g'`;; #(
++ *) ac_sed_conf_input=$configure_input;;
++ esac
++
++ case $ac_tag in
++ *:-:* | *:-) cat >"$ac_tmp/stdin" \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
++ esac
++ ;;
++ esac
++
++ ac_dir=`$as_dirname -- "$ac_file" ||
++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ as_dir="$ac_dir"; as_fn_mkdir_p
++ ac_builddir=.
++
++case "$ac_dir" in
++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
++*)
++ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
++ # A ".." for each directory in $ac_dir_suffix.
++ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
++ case $ac_top_builddir_sub in
++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
++ esac ;;
++esac
++ac_abs_top_builddir=$ac_pwd
++ac_abs_builddir=$ac_pwd$ac_dir_suffix
++# for backward compatibility:
++ac_top_builddir=$ac_top_build_prefix
++
++case $srcdir in
++ .) # We are building in place.
++ ac_srcdir=.
++ ac_top_srcdir=$ac_top_builddir_sub
++ ac_abs_top_srcdir=$ac_pwd ;;
++ [\\/]* | ?:[\\/]* ) # Absolute name.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir
++ ac_abs_top_srcdir=$srcdir ;;
++ *) # Relative name.
++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_build_prefix$srcdir
++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
++esac
++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
++
++
++ case $ac_mode in
++ :F)
++ #
++ # CONFIG_FILE
++ #
++
++ case $INSTALL in
++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
++ esac
++ ac_MKDIR_P=$MKDIR_P
++ case $MKDIR_P in
++ [\\/$]* | ?:[\\/]* ) ;;
++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
++ esac
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++# If the template does not know about datarootdir, expand it.
++# FIXME: This hack should be removed a few years after 2.60.
++ac_datarootdir_hack=; ac_datarootdir_seen=
++ac_sed_dataroot='
++/datarootdir/ {
++ p
++ q
++}
++/@datadir@/p
++/@docdir@/p
++/@infodir@/p
++/@localedir@/p
++/@mandir@/p'
++case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
++*datarootdir*) ac_datarootdir_seen=yes;;
++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
++$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ ac_datarootdir_hack='
++ s&@datadir@&$datadir&g
++ s&@docdir@&$docdir&g
++ s&@infodir@&$infodir&g
++ s&@localedir@&$localedir&g
++ s&@mandir@&$mandir&g
++ s&\\\${datarootdir}&$datarootdir&g' ;;
++esac
++_ACEOF
++
++# Neutralize VPATH when `$srcdir' = `.'.
++# Shell code in configure.ac might set extrasub.
++# FIXME: do we really want to maintain this feature?
++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
++ac_sed_extra="$ac_vpsub
++$extrasub
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
++:t
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++s|@configure_input@|$ac_sed_conf_input|;t t
++s&@top_builddir@&$ac_top_builddir_sub&;t t
++s&@top_build_prefix@&$ac_top_build_prefix&;t t
++s&@srcdir@&$ac_srcdir&;t t
++s&@abs_srcdir@&$ac_abs_srcdir&;t t
++s&@top_srcdir@&$ac_top_srcdir&;t t
++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
++s&@builddir@&$ac_builddir&;t t
++s&@abs_builddir@&$ac_abs_builddir&;t t
++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
++s&@INSTALL@&$ac_INSTALL&;t t
++s&@MKDIR_P@&$ac_MKDIR_P&;t t
++$ac_datarootdir_hack
++"
++eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
++ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++
++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
++ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
++ "$ac_tmp/out"`; test -z "$ac_out"; } &&
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++which seems to be undefined. Please make sure it is defined" >&5
++$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
++which seems to be undefined. Please make sure it is defined" >&2;}
++
++ rm -f "$ac_tmp/stdin"
++ case $ac_file in
++ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
++ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
++ esac \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++ ;;
++ :H)
++ #
++ # CONFIG_HEADER
++ #
++ if test x"$ac_file" != x-; then
++ {
++ $as_echo "/* $configure_input */" \
++ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
++ } >"$ac_tmp/config.h" \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
++$as_echo "$as_me: $ac_file is unchanged" >&6;}
++ else
++ rm -f "$ac_file"
++ mv "$ac_tmp/config.h" "$ac_file" \
++ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
++ fi
++ else
++ $as_echo "/* $configure_input */" \
++ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
++ || as_fn_error $? "could not create -" "$LINENO" 5
++ fi
++# Compute "$ac_file"'s index in $config_headers.
++_am_arg="$ac_file"
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $_am_arg | $_am_arg:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
++$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$_am_arg" : 'X\(//\)[^/]' \| \
++ X"$_am_arg" : 'X\(//\)$' \| \
++ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$_am_arg" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`/stamp-h$_am_stamp_count
++ ;;
++
++ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
++$as_echo "$as_me: executing $ac_file commands" >&6;}
++ ;;
++ esac
++
++
++ case $ac_file$ac_mode in
++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
++ # Autoconf 2.62 quotes --file arguments for eval, but not when files
++ # are listed without --file. Let's play safe and only enable the eval
++ # if we detect the quoting.
++ case $CONFIG_FILES in
++ *\'*) eval set x "$CONFIG_FILES" ;;
++ *) set x $CONFIG_FILES ;;
++ esac
++ shift
++ for mf
++ do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # Grep'ing the whole file is not good either: AIX grep has a line
++ # limit of 2048, but all sed's we know have understand at least 4000.
++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
++ dirpart=`$as_dirname -- "$mf" ||
++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$mf" : 'X\(//\)[^/]' \| \
++ X"$mf" : 'X\(//\)$' \| \
++ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$mf" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ else
++ continue
++ fi
++ # Extract the definition of DEPDIR, am__include, and am__quote
++ # from the Makefile without running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ am__include=`sed -n 's/^am__include = //p' < "$mf"`
++ test -z "am__include" && continue
++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ # Find all dependency output files, they are included files with
++ # $(DEPDIR) in their names. We invoke sed twice because it is the
++ # simplest approach to changing $(DEPDIR) to its actual value in the
++ # expansion.
++ for file in `sed -n "
++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`$as_dirname -- "$file" ||
++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$file" : 'X\(//\)[^/]' \| \
++ X"$file" : 'X\(//\)$' \| \
++ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
++$as_echo X"$file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'`
++ as_dir=$dirpart/$fdir; as_fn_mkdir_p
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++ done
++}
++ ;;
++ "libtool":C)
++
++ # See if we are running on zsh, and set the options which allow our
++ # commands through without removal of \ escapes.
++ if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++ fi
++
++ cfgfile="${ofile}T"
++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
++ $RM "$cfgfile"
++
++ cat <<_LT_EOF >> "$cfgfile"
++#! $SHELL
++
++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
++# Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
++#
++# This file is part of GNU Libtool.
++#
++# GNU Libtool is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING. If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
++# obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++
++
++# The names of the tagged configurations supported by this script.
++available_tags=""
++
++# ### BEGIN LIBTOOL CONFIG
++
++# Which release of libtool.m4 was used?
++macro_version=$macro_version
++macro_revision=$macro_revision
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# What type of objects to build.
++pic_mode=$pic_mode
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# An echo program that protects backslashes.
++ECHO=$lt_ECHO
++
++# The PATH separator for the build system.
++PATH_SEPARATOR=$lt_PATH_SEPARATOR
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# A sed program that does not truncate output.
++SED=$lt_SED
++
++# Sed that helps us avoid accidentally triggering echo(1) options like -n.
++Xsed="\$SED -e 1s/^X//"
++
++# A grep program that handles long lines.
++GREP=$lt_GREP
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# A literal string matcher.
++FGREP=$lt_FGREP
++
++# A BSD- or MS-compatible name lister.
++NM=$lt_NM
++
++# Whether we need soft or hard links.
++LN_S=$lt_LN_S
++
++# What is the maximum length of a command?
++max_cmd_len=$max_cmd_len
++
++# Object file suffix (normally "o").
++objext=$ac_objext
++
++# Executable file suffix (normally "").
++exeext=$exeext
++
++# whether the shell understands "unset".
++lt_unset=$lt_unset
++
++# turn spaces into newlines.
++SP2NL=$lt_lt_SP2NL
++
++# turn newlines into spaces.
++NL2SP=$lt_lt_NL2SP
++
++# convert \$build file names to \$host format.
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++
++# convert \$build files to toolchain format.
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++
++# An object symbol dumper.
++OBJDUMP=$lt_OBJDUMP
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method = "file_magic".
++file_magic_cmd=$lt_file_magic_cmd
++
++# How to find potential files when deplibs_check_method = "file_magic".
++file_magic_glob=$lt_file_magic_glob
++
++# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
++want_nocaseglob=$lt_want_nocaseglob
++
++# DLL creation program.
++DLLTOOL=$lt_DLLTOOL
++
++# Command to associate shared and link libraries.
++sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
++
++# The archiver.
++AR=$lt_AR
++
++# Flags to create an archive.
++AR_FLAGS=$lt_AR_FLAGS
++
++# How to feed a file listing to the archiver.
++archiver_list_spec=$lt_archiver_list_spec
++
++# A symbol stripping program.
++STRIP=$lt_STRIP
++
++# Commands used to install an old-style archive.
++RANLIB=$lt_RANLIB
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
++
++# Whether to use a lock for old archive extraction.
++lock_old_archive_extraction=$lock_old_archive_extraction
++
++# A C compiler.
++LTCC=$lt_CC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_CFLAGS
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration.
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair.
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# Transform the output of nm in a C name address pair when lib prefix is needed.
++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
++
++# Specify filename containing input files for \$NM.
++nm_file_list_spec=$lt_nm_file_list_spec
++
++# The root where to search for dependent libraries,and in which our libraries should be installed.
++lt_sysroot=$lt_sysroot
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# Used to examine libraries when file_magic_cmd begins with "file".
++MAGIC_CMD=$MAGIC_CMD
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Manifest tool.
++MANIFEST_TOOL=$lt_MANIFEST_TOOL
++
++# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
++DSYMUTIL=$lt_DSYMUTIL
++
++# Tool to change global to local symbols on Mac OS X.
++NMEDIT=$lt_NMEDIT
++
++# Tool to manipulate fat objects and archives on Mac OS X.
++LIPO=$lt_LIPO
++
++# ldd/readelf like tool for Mach-O binaries on Mac OS X.
++OTOOL=$lt_OTOOL
++
++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
++OTOOL64=$lt_OTOOL64
++
++# Old archive suffix (normally "a").
++libext=$libext
++
++# Shared library suffix (normally ".so").
++shrext_cmds=$lt_shrext_cmds
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at link time.
++variables_saved_for_relink=$lt_variables_saved_for_relink
++
++# Do we need the "lib" prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Library versioning type.
++version_type=$version_type
++
++# Shared library runtime path variable.
++runpath_var=$runpath_var
++
++# Shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
++
++# List of archive names. First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME
++library_names_spec=$lt_library_names_spec
++
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
++
++# Permission mode override for installation of shared libraries.
++install_override_mode=$lt_install_override_mode
++
++# Command to use after installation of a shared archive.
++postinstall_cmds=$lt_postinstall_cmds
++
++# Command to use after uninstallation of a shared archive.
++postuninstall_cmds=$lt_postuninstall_cmds
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# As "finish_cmds", except a single script fragment to be evaled but
++# not shown.
++finish_eval=$lt_finish_eval
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Compile-time system search path for libraries.
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries.
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++
++# The linker used to build libraries.
++LD=$lt_LD
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# Commands used to build an old-style archive.
++old_archive_cmds=$lt_old_archive_cmds
++
++# A language specific compiler.
++CC=$lt_compiler
++
++# Is the compiler the GNU compiler?
++with_gcc=$GCC
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_lt_prog_compiler_pic
++
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_lt_prog_compiler_static
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_lt_cv_prog_compiler_c_o
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$archive_cmds_need_lc
++
++# Whether or not to disallow shared libs when runtime libs are static.
++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_whole_archive_flag_spec
++
++# Whether the compiler copes with passing no objects directly.
++compiler_needs_object=$lt_compiler_needs_object
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
++
++# Commands used to build a shared archive.
++archive_cmds=$lt_archive_cmds
++archive_expsym_cmds=$lt_archive_expsym_cmds
++
++# Commands used to build a loadable module if different from building
++# a shared archive.
++module_cmds=$lt_module_cmds
++module_expsym_cmds=$lt_module_expsym_cmds
++
++# Whether we are building with GNU ld or not.
++with_gnu_ld=$lt_with_gnu_ld
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_allow_undefined_flag
++
++# Flag that enforces no undefined symbols.
++no_undefined_flag=$lt_no_undefined_flag
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist
++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
++
++# Whether we need a single "-rpath" flag with a separated argument.
++hardcode_libdir_separator=$lt_hardcode_libdir_separator
++
++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
++# DIR into the resulting binary.
++hardcode_direct=$hardcode_direct
++
++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
++# DIR into the resulting binary and the resulting library dependency is
++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
++# library is relocated.
++hardcode_direct_absolute=$hardcode_direct_absolute
++
++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
++# into the resulting binary.
++hardcode_minus_L=$hardcode_minus_L
++
++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
++# into the resulting binary.
++hardcode_shlibpath_var=$hardcode_shlibpath_var
++
++# Set to "yes" if building a shared library automatically hardcodes DIR
++# into the library and all subsequent libraries and executables linked
++# against it.
++hardcode_automatic=$hardcode_automatic
++
++# Set to yes if linker adds runtime paths of dependent libraries
++# to runtime path list.
++inherit_rpath=$inherit_rpath
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$link_all_deplibs
++
++# Set to "yes" if exported symbols are required.
++always_export_symbols=$always_export_symbols
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_export_symbols_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_exclude_expsyms
++
++# Symbols that must always be exported.
++include_expsyms=$lt_include_expsyms
++
++# Commands necessary for linking programs (against libraries) with templates.
++prelink_cmds=$lt_prelink_cmds
++
++# Commands necessary for finishing linking programs.
++postlink_cmds=$lt_postlink_cmds
++
++# Specify filename containing input files.
++file_list_spec=$lt_file_list_spec
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$hardcode_action
++
++# ### END LIBTOOL CONFIG
++
++_LT_EOF
++
++ case $host_os in
++ aix3*)
++ cat <<\_LT_EOF >> "$cfgfile"
++# AIX sometimes has problems with the GCC collect2 program. For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++fi
++_LT_EOF
++ ;;
++ esac
++
++
++ltmain="$ac_aux_dir/ltmain.sh"
++
++
++ # We use sed instead of cat because bash on DJGPP gets confused if
++ # if finds mixed CR/LF and LF-only lines. Since sed operates in
++ # text mode, it properly converts lines to CR/LF. This bash problem
++ # is reportedly fixed, but why not run on old versions too?
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
++
++ if test x"$xsi_shell" = xyes; then
++ sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
++func_dirname ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_basename ()$/,/^} # func_basename /c\
++func_basename ()\
++{\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
++func_dirname_and_basename ()\
++{\
++\ case ${1} in\
++\ */*) func_dirname_result="${1%/*}${2}" ;;\
++\ * ) func_dirname_result="${3}" ;;\
++\ esac\
++\ func_basename_result="${1##*/}"\
++} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
++func_stripname ()\
++{\
++\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
++\ # positional parameters, so assign one to ordinary parameter first.\
++\ func_stripname_result=${3}\
++\ func_stripname_result=${func_stripname_result#"${1}"}\
++\ func_stripname_result=${func_stripname_result%"${2}"}\
++} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
++func_split_long_opt ()\
++{\
++\ func_split_long_opt_name=${1%%=*}\
++\ func_split_long_opt_arg=${1#*=}\
++} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
++func_split_short_opt ()\
++{\
++\ func_split_short_opt_arg=${1#??}\
++\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
++} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
++func_lo2o ()\
++{\
++\ case ${1} in\
++\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
++\ *) func_lo2o_result=${1} ;;\
++\ esac\
++} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_xform ()$/,/^} # func_xform /c\
++func_xform ()\
++{\
++ func_xform_result=${1%.*}.lo\
++} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_arith ()$/,/^} # func_arith /c\
++func_arith ()\
++{\
++ func_arith_result=$(( $* ))\
++} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_len ()$/,/^} # func_len /c\
++func_len ()\
++{\
++ func_len_result=${#1}\
++} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++fi
++
++if test x"$lt_shell_append" = xyes; then
++ sed -e '/^func_append ()$/,/^} # func_append /c\
++func_append ()\
++{\
++ eval "${1}+=\\${2}"\
++} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
++func_append_quoted ()\
++{\
++\ func_quote_for_eval "${2}"\
++\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
++} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++
++
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
++
++if test x"$_lt_function_replace_fail" = x":"; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
++$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
++fi
++
++
++ mv -f "$cfgfile" "$ofile" ||
++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++ chmod +x "$ofile"
++
++ ;;
++
++ esac
++done # for ac_tag
++
++
++as_fn_exit 0
++_ACEOF
++ac_clean_files=$ac_clean_files_save
++
++test $ac_write_fail = 0 ||
++ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
++
++
++# configure is writing to config.log, and then calls config.status.
++# config.status does its own redirection, appending to config.log.
++# Unfortunately, on DOS this fails, as config.log is still kept open
++# by configure, so config.status won't be able to write to it; its
++# output is simply discarded. So we exec the FD to /dev/null,
++# effectively closing config.log, so it can be properly (re)opened and
++# appended to by config.status. When coming back to configure, we
++# need to make the FD available again.
++if test "$no_create" != yes; then
++ ac_cs_success=:
++ ac_config_status_args=
++ test "$silent" = yes &&
++ ac_config_status_args="$ac_config_status_args --quiet"
++ exec 5>/dev/null
++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
++ exec 5>>config.log
++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
++ # would make configure fail if this is the last instruction.
++ $ac_cs_success || as_fn_exit 1
++fi
++if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
++ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
++$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
++fi
++
+diff --git a/libclamav/libmspack-0.4alpha/configure.ac b/libclamav/libmspack-0.4alpha/configure.ac
+new file mode 100644
+index 000000000000..55fb6ce5ee9d
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/configure.ac
+@@ -0,0 +1,50 @@
++# -*- Autoconf -*-
++# Process this file with autoconf to produce a configure script.
++AC_PREREQ(2.59)
++AC_INIT([libmspack],[0.4alpha],[kyzer at 4u.net])
++AC_CONFIG_MACRO_DIR([m4])
++AM_INIT_AUTOMAKE
++AC_CONFIG_SRCDIR([mspack/mspack.h])
++AC_CONFIG_HEADER([config.h])
++
++dnl Enable silent rules by default (if yet support in automake)
++dnl use 'make V=1' to look at verbose commandline
++m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
++
++# --enable-debug option
++AC_ARG_ENABLE(debug,
++ AS_HELP_STRING(--enable-debug,enable debugging),
++ enable_debug=$enableval,
++ enable_debug=no)
++if test x$enable_debug = xyes; then
++ AC_DEFINE(DEBUG, 1, [Turn debugging mode on?])
++fi
++AM_CONDITIONAL(DEBUG, test x$enable_debug = 'xyes')
++
++# Checks for programs.
++AC_PROG_CC
++AM_CONDITIONAL(GCC, test x$GCC = 'xyes')
++AC_PROG_INSTALL
++LT_INIT
++AC_EXEEXT
++
++# Checks for header files.
++AC_HEADER_STDC
++AC_CHECK_HEADERS([ctype.h limits.h stdlib.h wctype.h])
++
++# Checks for typedefs, structures, and compiler characteristics.
++AC_C_CONST
++AC_C_INLINE
++AC_TYPE_MODE_T
++AC_TYPE_OFF_T
++AC_TYPE_SIZE_T
++AC_CHECK_SIZEOF([off_t])
++AC_CHECK_FUNCS([tolower towlower])
++
++# largefile support
++AC_SYS_LARGEFILE
++AC_FUNC_FSEEKO
++
++# Checks for library functions.
++AC_CONFIG_FILES([Makefile doc/Makefile doc/Doxyfile libmspack.pc])
++AC_OUTPUT
+diff --git a/libclamav/libmspack-0.4alpha/depcomp b/libclamav/libmspack-0.4alpha/depcomp
+new file mode 100755
+index 000000000000..bd0ac089584a
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/depcomp
+@@ -0,0 +1,688 @@
++#! /bin/sh
++# depcomp - compile a program generating dependencies as side-effects
++
++scriptversion=2011-12-04.11; # UTC
++
++# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
++# 2011 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
++
++case $1 in
++ '')
++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
++ exit 1;
++ ;;
++ -h | --h*)
++ cat <<\EOF
++Usage: depcomp [--help] [--version] PROGRAM [ARGS]
++
++Run PROGRAMS ARGS to compile a file, generating dependencies
++as side-effects.
++
++Environment variables:
++ depmode Dependency tracking mode.
++ source Source file read by `PROGRAMS ARGS'.
++ object Object file output by `PROGRAMS ARGS'.
++ DEPDIR directory where to store dependencies.
++ depfile Dependency file to output.
++ tmpdepfile Temporary file to use when outputting dependencies.
++ libtool Whether libtool is used (yes/no).
++
++Report bugs to <bug-automake at gnu.org>.
++EOF
++ exit $?
++ ;;
++ -v | --v*)
++ echo "depcomp $scriptversion"
++ exit $?
++ ;;
++esac
++
++if test -z "$depmode" || test -z "$source" || test -z "$object"; then
++ echo "depcomp: Variables source, object and depmode must be set" 1>&2
++ exit 1
++fi
++
++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
++depfile=${depfile-`echo "$object" |
++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
++
++rm -f "$tmpdepfile"
++
++# Some modes work just like other modes, but use different flags. We
++# parameterize here, but still list the modes in the big case below,
++# to make depend.m4 easier to write. Note that we *cannot* use a case
++# here, because this file can only contain one case statement.
++if test "$depmode" = hp; then
++ # HP compiler uses -M and no extra arg.
++ gccflag=-M
++ depmode=gcc
++fi
++
++if test "$depmode" = dashXmstdout; then
++ # This is just like dashmstdout with a different argument.
++ dashmflag=-xM
++ depmode=dashmstdout
++fi
++
++cygpath_u="cygpath -u -f -"
++if test "$depmode" = msvcmsys; then
++ # This is just like msvisualcpp but w/o cygpath translation.
++ # Just convert the backslash-escaped backslashes to single forward
++ # slashes to satisfy depend.m4
++ cygpath_u='sed s,\\\\,/,g'
++ depmode=msvisualcpp
++fi
++
++if test "$depmode" = msvc7msys; then
++ # This is just like msvc7 but w/o cygpath translation.
++ # Just convert the backslash-escaped backslashes to single forward
++ # slashes to satisfy depend.m4
++ cygpath_u='sed s,\\\\,/,g'
++ depmode=msvc7
++fi
++
++case "$depmode" in
++gcc3)
++## gcc 3 implements dependency tracking that does exactly what
++## we want. Yay! Note: for some reason libtool 1.4 doesn't like
++## it if -MD -MP comes after the -MF stuff. Hmm.
++## Unfortunately, FreeBSD c89 acceptance of flags depends upon
++## the command line argument order; so add the flags where they
++## appear in depend2.am. Note that the slowdown incurred here
++## affects only configure: in makefiles, %FASTDEP% shortcuts this.
++ for arg
++ do
++ case $arg in
++ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
++ *) set fnord "$@" "$arg" ;;
++ esac
++ shift # fnord
++ shift # $arg
++ done
++ "$@"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ mv "$tmpdepfile" "$depfile"
++ ;;
++
++gcc)
++## There are various ways to get dependency output from gcc. Here's
++## why we pick this rather obscure method:
++## - Don't want to use -MD because we'd like the dependencies to end
++## up in a subdir. Having to rename by hand is ugly.
++## (We might end up doing this anyway to support other compilers.)
++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
++## -MM, not -M (despite what the docs say).
++## - Using -M directly means running the compiler twice (even worse
++## than renaming).
++ if test -z "$gccflag"; then
++ gccflag=-MD,
++ fi
++ "$@" -Wp,"$gccflag$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
++## The second -e expression handles DOS-style file names with drive letters.
++ sed -e 's/^[^:]*: / /' \
++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
++## This next piece of magic avoids the `deleted header file' problem.
++## The problem is that when a header file which appears in a .P file
++## is deleted, the dependency causes make to die (because there is
++## typically no way to rebuild the header). We avoid this by adding
++## dummy dependencies for each header file. Too bad gcc doesn't do
++## this for us directly.
++ tr ' ' '
++' < "$tmpdepfile" |
++## Some versions of gcc put a space before the `:'. On the theory
++## that the space means something, we add a space to the output as
++## well. hp depmode also adds that space, but also prefixes the VPATH
++## to the object. Take care to not repeat it in the output.
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
++ | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++hp)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++sgi)
++ if test "$libtool" = yes; then
++ "$@" "-Wp,-MDupdate,$tmpdepfile"
++ else
++ "$@" -MDupdate "$tmpdepfile"
++ fi
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++
++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
++ echo "$object : \\" > "$depfile"
++
++ # Clip off the initial element (the dependent). Don't try to be
++ # clever and replace this with sed code, as IRIX sed won't handle
++ # lines with more than a fixed number of characters (4096 in
++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
++ # the IRIX cc adds comments like `#:fec' to the end of the
++ # dependency line.
++ tr ' ' '
++' < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
++ tr '
++' ' ' >> "$depfile"
++ echo >> "$depfile"
++
++ # The second pass generates a dummy entry for each header file.
++ tr ' ' '
++' < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
++ >> "$depfile"
++ else
++ # The sourcefile does not contain any dependencies, so just
++ # store a dummy comment line, to avoid errors with the Makefile
++ # "include basename.Plo" scheme.
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++aix)
++ # The C for AIX Compiler uses -M and outputs the dependencies
++ # in a .u file. In older versions, this file always lives in the
++ # current directory. Also, the AIX compiler puts `$object:' at the
++ # start of each line; $object doesn't have directory information.
++ # Version 6 uses the directory in both cases.
++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++ test "x$dir" = "x$object" && dir=
++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
++ if test "$libtool" = yes; then
++ tmpdepfile1=$dir$base.u
++ tmpdepfile2=$base.u
++ tmpdepfile3=$dir.libs/$base.u
++ "$@" -Wc,-M
++ else
++ tmpdepfile1=$dir$base.u
++ tmpdepfile2=$dir$base.u
++ tmpdepfile3=$dir$base.u
++ "$@" -M
++ fi
++ stat=$?
++
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ if test -f "$tmpdepfile"; then
++ # Each line is of the form `foo.o: dependent.h'.
++ # Do two passes, one to just change these to
++ # `$object: dependent.h' and one to simply `dependent.h:'.
++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
++ # That's a tab and a space in the [].
++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++ else
++ # The sourcefile does not contain any dependencies, so just
++ # store a dummy comment line, to avoid errors with the Makefile
++ # "include basename.Plo" scheme.
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++icc)
++ # Intel's C compiler understands `-MD -MF file'. However on
++ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
++ # ICC 7.0 will fill foo.d with something like
++ # foo.o: sub/foo.c
++ # foo.o: sub/foo.h
++ # which is wrong. We want:
++ # sub/foo.o: sub/foo.c
++ # sub/foo.o: sub/foo.h
++ # sub/foo.c:
++ # sub/foo.h:
++ # ICC 7.1 will output
++ # foo.o: sub/foo.c sub/foo.h
++ # and will wrap long lines using \ :
++ # foo.o: sub/foo.c ... \
++ # sub/foo.h ... \
++ # ...
++
++ "$@" -MD -MF "$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ # Each line is of the form `foo.o: dependent.h',
++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
++ # Do two passes, one to just change these to
++ # `$object: dependent.h' and one to simply `dependent.h:'.
++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
++ # Some versions of the HPUX 10.20 sed can't process this invocation
++ # correctly. Breaking it into two sed invocations is a workaround.
++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
++ sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++hp2)
++ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
++ # compilers, which have integrated preprocessors. The correct option
++ # to use with these is +Maked; it writes dependencies to a file named
++ # 'foo.d', which lands next to the object file, wherever that
++ # happens to be.
++ # Much of this is similar to the tru64 case; see comments there.
++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++ test "x$dir" = "x$object" && dir=
++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
++ if test "$libtool" = yes; then
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir.libs/$base.d
++ "$@" -Wc,+Maked
++ else
++ tmpdepfile1=$dir$base.d
++ tmpdepfile2=$dir$base.d
++ "$@" +Maked
++ fi
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile1" "$tmpdepfile2"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ if test -f "$tmpdepfile"; then
++ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
++ # Add `dependent.h:' lines.
++ sed -ne '2,${
++ s/^ *//
++ s/ \\*$//
++ s/$/:/
++ p
++ }' "$tmpdepfile" >> "$depfile"
++ else
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile" "$tmpdepfile2"
++ ;;
++
++tru64)
++ # The Tru64 compiler uses -MD to generate dependencies as a side
++ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
++ # dependencies in `foo.d' instead, so we check for that too.
++ # Subdirectories are respected.
++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++ test "x$dir" = "x$object" && dir=
++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
++
++ if test "$libtool" = yes; then
++ # With Tru64 cc, shared objects can also be used to make a
++ # static library. This mechanism is used in libtool 1.4 series to
++ # handle both shared and static libraries in a single compilation.
++ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
++ #
++ # With libtool 1.5 this exception was removed, and libtool now
++ # generates 2 separate objects for the 2 libraries. These two
++ # compilations output dependencies in $dir.libs/$base.o.d and
++ # in $dir$base.o.d. We have to check for both files, because
++ # one of the two compilations can be disabled. We should prefer
++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
++ # automatically cleaned when .libs/ is deleted, while ignoring
++ # the former would cause a distcleancheck panic.
++ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
++ tmpdepfile2=$dir$base.o.d # libtool 1.5
++ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
++ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
++ "$@" -Wc,-MD
++ else
++ tmpdepfile1=$dir$base.o.d
++ tmpdepfile2=$dir$base.d
++ tmpdepfile3=$dir$base.d
++ tmpdepfile4=$dir$base.d
++ "$@" -MD
++ fi
++
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
++ exit $stat
++ fi
++
++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
++ do
++ test -f "$tmpdepfile" && break
++ done
++ if test -f "$tmpdepfile"; then
++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
++ # That's a tab and a space in the [].
++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++ else
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++msvc7)
++ if test "$libtool" = yes; then
++ showIncludes=-Wc,-showIncludes
++ else
++ showIncludes=-showIncludes
++ fi
++ "$@" $showIncludes > "$tmpdepfile"
++ stat=$?
++ grep -v '^Note: including file: ' "$tmpdepfile"
++ if test "$stat" = 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ # The first sed program below extracts the file names and escapes
++ # backslashes for cygpath. The second sed program outputs the file
++ # name when reading, but also accumulates all include files in the
++ # hold buffer in order to output them again at the end. This only
++ # works with sed implementations that can handle large buffers.
++ sed < "$tmpdepfile" -n '
++/^Note: including file: *\(.*\)/ {
++ s//\1/
++ s/\\/\\\\/g
++ p
++}' | $cygpath_u | sort -u | sed -n '
++s/ /\\ /g
++s/\(.*\)/ \1 \\/p
++s/.\(.*\) \\/\1:/
++H
++$ {
++ s/.*/ /
++ G
++ p
++}' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++msvc7msys)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++#nosideeffect)
++ # This comment above is used by automake to tell side-effect
++ # dependency tracking mechanisms from slower ones.
++
++dashmstdout)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout, regardless of -o.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove `-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
++ ;;
++ esac
++ done
++
++ test -z "$dashmflag" && dashmflag=-M
++ # Require at least two characters before searching for `:'
++ # in the target name. This is to cope with DOS-style filenames:
++ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
++ "$@" $dashmflag |
++ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
++ rm -f "$depfile"
++ cat < "$tmpdepfile" > "$depfile"
++ tr ' ' '
++' < "$tmpdepfile" | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++dashXmstdout)
++ # This case only exists to satisfy depend.m4. It is never actually
++ # run, as this mode is specially recognized in the preamble.
++ exit 1
++ ;;
++
++makedepend)
++ "$@" || exit $?
++ # Remove any Libtool call
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++ # X makedepend
++ shift
++ cleared=no eat=no
++ for arg
++ do
++ case $cleared in
++ no)
++ set ""; shift
++ cleared=yes ;;
++ esac
++ if test $eat = yes; then
++ eat=no
++ continue
++ fi
++ case "$arg" in
++ -D*|-I*)
++ set fnord "$@" "$arg"; shift ;;
++ # Strip any option that makedepend may not understand. Remove
++ # the object too, otherwise makedepend will parse it as a source file.
++ -arch)
++ eat=yes ;;
++ -*|$object)
++ ;;
++ *)
++ set fnord "$@" "$arg"; shift ;;
++ esac
++ done
++ obj_suffix=`echo "$object" | sed 's/^.*\././'`
++ touch "$tmpdepfile"
++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
++ rm -f "$depfile"
++ # makedepend may prepend the VPATH from the source file name to the object.
++ # No need to regex-escape $object, excess matching of '.' is harmless.
++ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
++ sed '1,2d' "$tmpdepfile" | tr ' ' '
++' | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile" "$tmpdepfile".bak
++ ;;
++
++cpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove `-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
++ ;;
++ esac
++ done
++
++ "$@" -E |
++ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
++ sed '$ s: \\$::' > "$tmpdepfile"
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ cat < "$tmpdepfile" >> "$depfile"
++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++msvisualcpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test "X$1" != 'X--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ IFS=" "
++ for arg
++ do
++ case "$arg" in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
++ set fnord "$@"
++ shift
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift
++ shift
++ ;;
++ esac
++ done
++ "$@" -E 2>/dev/null |
++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
++ echo " " >> "$depfile"
++ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++msvcmsys)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++none)
++ exec "$@"
++ ;;
++
++*)
++ echo "Unknown depmode $depmode" 1>&2
++ exit 1
++ ;;
++esac
++
++exit 0
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-time-zone: "UTC"
++# time-stamp-end: "; # UTC"
++# End:
+diff --git a/libclamav/libmspack-0.4alpha/install-sh b/libclamav/libmspack-0.4alpha/install-sh
+new file mode 100755
+index 000000000000..6781b987bdbc
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/install-sh
+@@ -0,0 +1,520 @@
++#!/bin/sh
++# install - install a program, script, or datafile
++
++scriptversion=2009-04-28.21; # UTC
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
++#
++# Copyright (C) 1994 X Consortium
++#
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
++#
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++#
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
++#
++#
++# FSF changes to this file are in the public domain.
++#
++# Calling this script install-sh is preferred over install.sh, to prevent
++# `make' implicit rules from creating a file called install from it
++# when there is no Makefile.
++#
++# This script is compatible with the BSD install script, but was written
++# from scratch.
++
++nl='
++'
++IFS=" "" $nl"
++
++# set DOITPROG to echo to test this script
++
++# Don't use :- since 4.3BSD and earlier shells don't like it.
++doit=${DOITPROG-}
++if test -z "$doit"; then
++ doit_exec=exec
++else
++ doit_exec=$doit
++fi
++
++# Put in absolute file names if you don't have them in your path;
++# or use environment vars.
++
++chgrpprog=${CHGRPPROG-chgrp}
++chmodprog=${CHMODPROG-chmod}
++chownprog=${CHOWNPROG-chown}
++cmpprog=${CMPPROG-cmp}
++cpprog=${CPPROG-cp}
++mkdirprog=${MKDIRPROG-mkdir}
++mvprog=${MVPROG-mv}
++rmprog=${RMPROG-rm}
++stripprog=${STRIPPROG-strip}
++
++posix_glob='?'
++initialize_posix_glob='
++ test "$posix_glob" != "?" || {
++ if (set -f) 2>/dev/null; then
++ posix_glob=
++ else
++ posix_glob=:
++ fi
++ }
++'
++
++posix_mkdir=
++
++# Desired mode of installed file.
++mode=0755
++
++chgrpcmd=
++chmodcmd=$chmodprog
++chowncmd=
++mvcmd=$mvprog
++rmcmd="$rmprog -f"
++stripcmd=
++
++src=
++dst=
++dir_arg=
++dst_arg=
++
++copy_on_change=false
++no_target_directory=
++
++usage="\
++Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
++ or: $0 [OPTION]... SRCFILES... DIRECTORY
++ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
++ or: $0 [OPTION]... -d DIRECTORIES...
++
++In the 1st form, copy SRCFILE to DSTFILE.
++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
++In the 4th, create DIRECTORIES.
++
++Options:
++ --help display this help and exit.
++ --version display version info and exit.
++
++ -c (ignored)
++ -C install only if different (preserve the last data modification time)
++ -d create directories instead of installing files.
++ -g GROUP $chgrpprog installed files to GROUP.
++ -m MODE $chmodprog installed files to MODE.
++ -o USER $chownprog installed files to USER.
++ -s $stripprog installed files.
++ -t DIRECTORY install into DIRECTORY.
++ -T report an error if DSTFILE is a directory.
++
++Environment variables override the default commands:
++ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
++ RMPROG STRIPPROG
++"
++
++while test $# -ne 0; do
++ case $1 in
++ -c) ;;
++
++ -C) copy_on_change=true;;
++
++ -d) dir_arg=true;;
++
++ -g) chgrpcmd="$chgrpprog $2"
++ shift;;
++
++ --help) echo "$usage"; exit $?;;
++
++ -m) mode=$2
++ case $mode in
++ *' '* | *' '* | *'
++'* | *'*'* | *'?'* | *'['*)
++ echo "$0: invalid mode: $mode" >&2
++ exit 1;;
++ esac
++ shift;;
++
++ -o) chowncmd="$chownprog $2"
++ shift;;
++
++ -s) stripcmd=$stripprog;;
++
++ -t) dst_arg=$2
++ shift;;
++
++ -T) no_target_directory=true;;
++
++ --version) echo "$0 $scriptversion"; exit $?;;
++
++ --) shift
++ break;;
++
++ -*) echo "$0: invalid option: $1" >&2
++ exit 1;;
++
++ *) break;;
++ esac
++ shift
++done
++
++if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
++ # When -d is used, all remaining arguments are directories to create.
++ # When -t is used, the destination is already specified.
++ # Otherwise, the last argument is the destination. Remove it from $@.
++ for arg
++ do
++ if test -n "$dst_arg"; then
++ # $@ is not empty: it contains at least $arg.
++ set fnord "$@" "$dst_arg"
++ shift # fnord
++ fi
++ shift # arg
++ dst_arg=$arg
++ done
++fi
++
++if test $# -eq 0; then
++ if test -z "$dir_arg"; then
++ echo "$0: no input file specified." >&2
++ exit 1
++ fi
++ # It's OK to call `install-sh -d' without argument.
++ # This can happen when creating conditional directories.
++ exit 0
++fi
++
++if test -z "$dir_arg"; then
++ trap '(exit $?); exit' 1 2 13 15
++
++ # Set umask so as not to create temps with too-generous modes.
++ # However, 'strip' requires both read and write access to temps.
++ case $mode in
++ # Optimize common cases.
++ *644) cp_umask=133;;
++ *755) cp_umask=22;;
++
++ *[0-7])
++ if test -z "$stripcmd"; then
++ u_plus_rw=
++ else
++ u_plus_rw='% 200'
++ fi
++ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
++ *)
++ if test -z "$stripcmd"; then
++ u_plus_rw=
++ else
++ u_plus_rw=,u+rw
++ fi
++ cp_umask=$mode$u_plus_rw;;
++ esac
++fi
++
++for src
++do
++ # Protect names starting with `-'.
++ case $src in
++ -*) src=./$src;;
++ esac
++
++ if test -n "$dir_arg"; then
++ dst=$src
++ dstdir=$dst
++ test -d "$dstdir"
++ dstdir_status=$?
++ else
++
++ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
++ # might cause directories to be created, which would be especially bad
++ # if $src (and thus $dsttmp) contains '*'.
++ if test ! -f "$src" && test ! -d "$src"; then
++ echo "$0: $src does not exist." >&2
++ exit 1
++ fi
++
++ if test -z "$dst_arg"; then
++ echo "$0: no destination specified." >&2
++ exit 1
++ fi
++
++ dst=$dst_arg
++ # Protect names starting with `-'.
++ case $dst in
++ -*) dst=./$dst;;
++ esac
++
++ # If destination is a directory, append the input filename; won't work
++ # if double slashes aren't ignored.
++ if test -d "$dst"; then
++ if test -n "$no_target_directory"; then
++ echo "$0: $dst_arg: Is a directory" >&2
++ exit 1
++ fi
++ dstdir=$dst
++ dst=$dstdir/`basename "$src"`
++ dstdir_status=0
++ else
++ # Prefer dirname, but fall back on a substitute if dirname fails.
++ dstdir=`
++ (dirname "$dst") 2>/dev/null ||
++ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$dst" : 'X\(//\)[^/]' \| \
++ X"$dst" : 'X\(//\)$' \| \
++ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
++ echo X"$dst" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)[^/].*/{
++ s//\1/
++ q
++ }
++ /^X\(\/\/\)$/{
++ s//\1/
++ q
++ }
++ /^X\(\/\).*/{
++ s//\1/
++ q
++ }
++ s/.*/./; q'
++ `
++
++ test -d "$dstdir"
++ dstdir_status=$?
++ fi
++ fi
++
++ obsolete_mkdir_used=false
++
++ if test $dstdir_status != 0; then
++ case $posix_mkdir in
++ '')
++ # Create intermediate dirs using mode 755 as modified by the umask.
++ # This is like FreeBSD 'install' as of 1997-10-28.
++ umask=`umask`
++ case $stripcmd.$umask in
++ # Optimize common cases.
++ *[2367][2367]) mkdir_umask=$umask;;
++ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
++
++ *[0-7])
++ mkdir_umask=`expr $umask + 22 \
++ - $umask % 100 % 40 + $umask % 20 \
++ - $umask % 10 % 4 + $umask % 2
++ `;;
++ *) mkdir_umask=$umask,go-w;;
++ esac
++
++ # With -d, create the new directory with the user-specified mode.
++ # Otherwise, rely on $mkdir_umask.
++ if test -n "$dir_arg"; then
++ mkdir_mode=-m$mode
++ else
++ mkdir_mode=
++ fi
++
++ posix_mkdir=false
++ case $umask in
++ *[123567][0-7][0-7])
++ # POSIX mkdir -p sets u+wx bits regardless of umask, which
++ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
++ ;;
++ *)
++ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
++ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
++
++ if (umask $mkdir_umask &&
++ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
++ then
++ if test -z "$dir_arg" || {
++ # Check for POSIX incompatibilities with -m.
++ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
++ # other-writeable bit of parent directory when it shouldn't.
++ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
++ ls_ld_tmpdir=`ls -ld "$tmpdir"`
++ case $ls_ld_tmpdir in
++ d????-?r-*) different_mode=700;;
++ d????-?--*) different_mode=755;;
++ *) false;;
++ esac &&
++ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
++ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
++ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
++ }
++ }
++ then posix_mkdir=:
++ fi
++ rmdir "$tmpdir/d" "$tmpdir"
++ else
++ # Remove any dirs left behind by ancient mkdir implementations.
++ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
++ fi
++ trap '' 0;;
++ esac;;
++ esac
++
++ if
++ $posix_mkdir && (
++ umask $mkdir_umask &&
++ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
++ )
++ then :
++ else
++
++ # The umask is ridiculous, or mkdir does not conform to POSIX,
++ # or it failed possibly due to a race condition. Create the
++ # directory the slow way, step by step, checking for races as we go.
++
++ case $dstdir in
++ /*) prefix='/';;
++ -*) prefix='./';;
++ *) prefix='';;
++ esac
++
++ eval "$initialize_posix_glob"
++
++ oIFS=$IFS
++ IFS=/
++ $posix_glob set -f
++ set fnord $dstdir
++ shift
++ $posix_glob set +f
++ IFS=$oIFS
++
++ prefixes=
++
++ for d
++ do
++ test -z "$d" && continue
++
++ prefix=$prefix$d
++ if test -d "$prefix"; then
++ prefixes=
++ else
++ if $posix_mkdir; then
++ (umask=$mkdir_umask &&
++ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
++ # Don't fail if two instances are running concurrently.
++ test -d "$prefix" || exit 1
++ else
++ case $prefix in
++ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
++ *) qprefix=$prefix;;
++ esac
++ prefixes="$prefixes '$qprefix'"
++ fi
++ fi
++ prefix=$prefix/
++ done
++
++ if test -n "$prefixes"; then
++ # Don't fail if two instances are running concurrently.
++ (umask $mkdir_umask &&
++ eval "\$doit_exec \$mkdirprog $prefixes") ||
++ test -d "$dstdir" || exit 1
++ obsolete_mkdir_used=true
++ fi
++ fi
++ fi
++
++ if test -n "$dir_arg"; then
++ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
++ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
++ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
++ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
++ else
++
++ # Make a couple of temp file names in the proper directory.
++ dsttmp=$dstdir/_inst.$$_
++ rmtmp=$dstdir/_rm.$$_
++
++ # Trap to clean up those temp files at exit.
++ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
++
++ # Copy the file name to the temp name.
++ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
++
++ # and set any options; do chmod last to preserve setuid bits.
++ #
++ # If any of these fail, we abort the whole thing. If we want to
++ # ignore errors from any of these, just make sure not to ignore
++ # errors from the above "$doit $cpprog $src $dsttmp" command.
++ #
++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
++ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
++ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
++ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
++
++ # If -C, don't bother to copy if it wouldn't change the file.
++ if $copy_on_change &&
++ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
++ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
++
++ eval "$initialize_posix_glob" &&
++ $posix_glob set -f &&
++ set X $old && old=:$2:$4:$5:$6 &&
++ set X $new && new=:$2:$4:$5:$6 &&
++ $posix_glob set +f &&
++
++ test "$old" = "$new" &&
++ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
++ then
++ rm -f "$dsttmp"
++ else
++ # Rename the file to the real destination.
++ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
++
++ # The rename failed, perhaps because mv can't rename something else
++ # to itself, or perhaps because mv is so ancient that it does not
++ # support -f.
++ {
++ # Now remove or move aside any old file at destination location.
++ # We try this two ways since rm can't unlink itself on some
++ # systems and the destination file might be busy for other
++ # reasons. In this case, the final cleanup might fail but the new
++ # file should still install successfully.
++ {
++ test ! -f "$dst" ||
++ $doit $rmcmd -f "$dst" 2>/dev/null ||
++ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
++ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
++ } ||
++ { echo "$0: cannot unlink or rename $dst" >&2
++ (exit 1); exit 1
++ }
++ } &&
++
++ # Now rename the file to the real destination.
++ $doit $mvcmd "$dsttmp" "$dst"
++ }
++ fi || exit 1
++
++ trap '' 0
++ fi
++done
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-time-zone: "UTC"
++# time-stamp-end: "; # UTC"
++# End:
+diff --git a/libclamav/libmspack-0.4alpha/libmspack.pc.in b/libclamav/libmspack-0.4alpha/libmspack.pc.in
+new file mode 100644
+index 000000000000..44b09f350580
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/libmspack.pc.in
+@@ -0,0 +1,10 @@
++prefix=@prefix@
++exec_prefix=@exec_prefix@
++libdir=@libdir@
++includedir=@includedir@
++
++Name: @PACKAGE@
++Description: Compressors and decompressors for Microsoft formats
++Version: @VERSION@
++Libs: -L${libdir} -lmspack
++Cflags: -I${includedir}
+diff --git a/libclamav/libmspack-0.4alpha/ltmain.sh b/libclamav/libmspack-0.4alpha/ltmain.sh
+new file mode 100644
+index 000000000000..c2852d856135
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/ltmain.sh
+@@ -0,0 +1,9661 @@
++
++# libtool (GNU libtool) 2.4.2
++# Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
++# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
++# This is free software; see the source for copying conditions. There is NO
++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
++
++# GNU Libtool is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING. If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html,
++# or obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++
++# Usage: $progname [OPTION]... [MODE-ARG]...
++#
++# Provide generalized library-building support services.
++#
++# --config show all configuration variables
++# --debug enable verbose shell tracing
++# -n, --dry-run display commands without modifying any files
++# --features display basic configuration information and exit
++# --mode=MODE use operation mode MODE
++# --preserve-dup-deps don't remove duplicate dependency libraries
++# --quiet, --silent don't print informational messages
++# --no-quiet, --no-silent
++# print informational messages (default)
++# --no-warn don't display warning messages
++# --tag=TAG use configuration variables from tag TAG
++# -v, --verbose print more informational messages than default
++# --no-verbose don't print the extra informational messages
++# --version print version information
++# -h, --help, --help-all print short, long, or detailed help message
++#
++# MODE must be one of the following:
++#
++# clean remove files from the build directory
++# compile compile a source file into a libtool object
++# execute automatically set library path, then run a program
++# finish complete the installation of libtool libraries
++# install install libraries or executables
++# link create a library or an executable
++# uninstall remove libraries from an installed directory
++#
++# MODE-ARGS vary depending on the MODE. When passed as first option,
++# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
++# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
++#
++# When reporting a bug, please describe a test case to reproduce it and
++# include the following information:
++#
++# host-triplet: $host
++# shell: $SHELL
++# compiler: $LTCC
++# compiler flags: $LTCFLAGS
++# linker: $LD (gnu? $with_gnu_ld)
++# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1ubuntu1
++# automake: $automake_version
++# autoconf: $autoconf_version
++#
++# Report bugs to <bug-libtool at gnu.org>.
++# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
++# General help using GNU software: <http://www.gnu.org/gethelp/>.
++
++PROGRAM=libtool
++PACKAGE=libtool
++VERSION="2.4.2 Debian-2.4.2-1ubuntu1"
++TIMESTAMP=""
++package_revision=1.3337
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++ setopt NO_GLOB_SUBST
++else
++ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++$1
++_LTECHO_EOF'
++}
++
++# NLS nuisances: We save the old values to restore during execute mode.
++lt_user_locale=
++lt_safe_locale=
++for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++do
++ eval "if test \"\${$lt_var+set}\" = set; then
++ save_$lt_var=\$$lt_var
++ $lt_var=C
++ export $lt_var
++ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
++ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
++ fi"
++done
++LC_ALL=C
++LANGUAGE=C
++export LANGUAGE LC_ALL
++
++$lt_unset CDPATH
++
++
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
++
++
++
++: ${CP="cp -f"}
++test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
++: ${MAKE="make"}
++: ${MKDIR="mkdir"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
++: ${Xsed="$SED -e 1s/^X//"}
++
++# Global variables:
++EXIT_SUCCESS=0
++EXIT_FAILURE=1
++EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
++EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
++
++exit_status=$EXIT_SUCCESS
++
++# Make sure IFS has a sensible default
++lt_nl='
++'
++IFS=" $lt_nl"
++
++dirname="s,/[^/]*$,,"
++basename="s,^.*/,,"
++
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE. If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
++ if test "X$func_dirname_result" = "X${1}"; then
++ func_dirname_result="${3}"
++ else
++ func_dirname_result="$func_dirname_result${2}"
++ fi
++} # func_dirname may be replaced by extended shell implementation
++
++
++# func_basename file
++func_basename ()
++{
++ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
++} # func_basename may be replaced by extended shell implementation
++
++
++# func_dirname_and_basename file append nondir_replacement
++# perform func_basename and func_dirname in a single function
++# call:
++# dirname: Compute the dirname of FILE. If nonempty,
++# add APPEND to the result, otherwise set result
++# to NONDIR_REPLACEMENT.
++# value returned in "$func_dirname_result"
++# basename: Compute filename of FILE.
++# value retuned in "$func_basename_result"
++# Implementation must be kept synchronized with func_dirname
++# and func_basename. For efficiency, we do not delegate to
++# those functions but instead duplicate the functionality here.
++func_dirname_and_basename ()
++{
++ # Extract subdirectory from the argument.
++ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
++ if test "X$func_dirname_result" = "X${1}"; then
++ func_dirname_result="${3}"
++ else
++ func_dirname_result="$func_dirname_result${2}"
++ fi
++ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
++} # func_dirname_and_basename may be replaced by extended shell implementation
++
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname may be replaced by extended shell implementation
++
++
++# These SED scripts presuppose an absolute path with a trailing slash.
++pathcar='s,^/\([^/]*\).*$,\1,'
++pathcdr='s,^/[^/]*,,'
++removedotparts=':dotsl
++ s@/\./@/@g
++ t dotsl
++ s,/\.$,/,'
++collapseslashes='s@/\{1,\}@/@g'
++finalslash='s,/*$,/,'
++
++# func_normal_abspath PATH
++# Remove doubled-up and trailing slashes, "." path components,
++# and cancel out any ".." path components in PATH after making
++# it an absolute path.
++# value returned in "$func_normal_abspath_result"
++func_normal_abspath ()
++{
++ # Start from root dir and reassemble the path.
++ func_normal_abspath_result=
++ func_normal_abspath_tpath=$1
++ func_normal_abspath_altnamespace=
++ case $func_normal_abspath_tpath in
++ "")
++ # Empty path, that just means $cwd.
++ func_stripname '' '/' "`pwd`"
++ func_normal_abspath_result=$func_stripname_result
++ return
++ ;;
++ # The next three entries are used to spot a run of precisely
++ # two leading slashes without using negated character classes;
++ # we take advantage of case's first-match behaviour.
++ ///*)
++ # Unusual form of absolute path, do nothing.
++ ;;
++ //*)
++ # Not necessarily an ordinary path; POSIX reserves leading '//'
++ # and for example Cygwin uses it to access remote file shares
++ # over CIFS/SMB, so we conserve a leading double slash if found.
++ func_normal_abspath_altnamespace=/
++ ;;
++ /*)
++ # Absolute path, do nothing.
++ ;;
++ *)
++ # Relative path, prepend $cwd.
++ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
++ ;;
++ esac
++ # Cancel out all the simple stuff to save iterations. We also want
++ # the path to end with a slash for ease of parsing, so make sure
++ # there is one (and only one) here.
++ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
++ while :; do
++ # Processed it all yet?
++ if test "$func_normal_abspath_tpath" = / ; then
++ # If we ascended to the root using ".." the result may be empty now.
++ if test -z "$func_normal_abspath_result" ; then
++ func_normal_abspath_result=/
++ fi
++ break
++ fi
++ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
++ -e "$pathcar"`
++ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
++ -e "$pathcdr"`
++ # Figure out what to do with it
++ case $func_normal_abspath_tcomponent in
++ "")
++ # Trailing empty path component, ignore it.
++ ;;
++ ..)
++ # Parent dir; strip last assembled component from result.
++ func_dirname "$func_normal_abspath_result"
++ func_normal_abspath_result=$func_dirname_result
++ ;;
++ *)
++ # Actual path component, append it.
++ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
++ ;;
++ esac
++ done
++ # Restore leading double-slash if one was found on entry.
++ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
++}
++
++# func_relative_path SRCDIR DSTDIR
++# generates a relative path from SRCDIR to DSTDIR, with a trailing
++# slash if non-empty, suitable for immediately appending a filename
++# without needing to append a separator.
++# value returned in "$func_relative_path_result"
++func_relative_path ()
++{
++ func_relative_path_result=
++ func_normal_abspath "$1"
++ func_relative_path_tlibdir=$func_normal_abspath_result
++ func_normal_abspath "$2"
++ func_relative_path_tbindir=$func_normal_abspath_result
++
++ # Ascend the tree starting from libdir
++ while :; do
++ # check if we have found a prefix of bindir
++ case $func_relative_path_tbindir in
++ $func_relative_path_tlibdir)
++ # found an exact match
++ func_relative_path_tcancelled=
++ break
++ ;;
++ $func_relative_path_tlibdir*)
++ # found a matching prefix
++ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
++ func_relative_path_tcancelled=$func_stripname_result
++ if test -z "$func_relative_path_result"; then
++ func_relative_path_result=.
++ fi
++ break
++ ;;
++ *)
++ func_dirname $func_relative_path_tlibdir
++ func_relative_path_tlibdir=${func_dirname_result}
++ if test "x$func_relative_path_tlibdir" = x ; then
++ # Have to descend all the way to the root!
++ func_relative_path_result=../$func_relative_path_result
++ func_relative_path_tcancelled=$func_relative_path_tbindir
++ break
++ fi
++ func_relative_path_result=../$func_relative_path_result
++ ;;
++ esac
++ done
++
++ # Now calculate path; take care to avoid doubling-up slashes.
++ func_stripname '' '/' "$func_relative_path_result"
++ func_relative_path_result=$func_stripname_result
++ func_stripname '/' '/' "$func_relative_path_tcancelled"
++ if test "x$func_stripname_result" != x ; then
++ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
++ fi
++
++ # Normalisation. If bindir is libdir, return empty string,
++ # else relative path ending with a slash; either way, target
++ # file name can be directly appended.
++ if test ! -z "$func_relative_path_result"; then
++ func_stripname './' '' "$func_relative_path_result/"
++ func_relative_path_result=$func_stripname_result
++ fi
++}
++
++# The name of this program:
++func_dirname_and_basename "$progpath"
++progname=$func_basename_result
++
++# Make sure we have an absolute path for reexecution:
++case $progpath in
++ [\\/]*|[A-Za-z]:\\*) ;;
++ *[\\/]*)
++ progdir=$func_dirname_result
++ progdir=`cd "$progdir" && pwd`
++ progpath="$progdir/$progname"
++ ;;
++ *)
++ save_IFS="$IFS"
++ IFS=${PATH_SEPARATOR-:}
++ for progdir in $PATH; do
++ IFS="$save_IFS"
++ test -x "$progdir/$progname" && break
++ done
++ IFS="$save_IFS"
++ test -n "$progdir" || progdir=`pwd`
++ progpath="$progdir/$progname"
++ ;;
++esac
++
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed="${SED}"' -e 1s/^X//'
++sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\(["`\\]\)/\\\1/g'
++
++# Sed substitution that turns a string into a regex matching for the
++# string literally.
++sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
++
++# Sed substitution that converts a w32 file name or path
++# which contains forward slashes, into one that contains
++# (escaped) backslashes. A very naive implementation.
++lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
++
++# Re-`\' parameter expansions in output of double_quote_subst that were
++# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
++# in input to double_quote_subst, that '$' was protected from expansion.
++# Since each input `\' is now two `\'s, look for any number of runs of
++# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
++bs='\\'
++bs2='\\\\'
++bs4='\\\\\\\\'
++dollar='\$'
++sed_double_backslash="\
++ s/$bs4/&\\
++/g
++ s/^$bs2$dollar/$bs&/
++ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
++ s/\n//g"
++
++# Standard options:
++opt_dry_run=false
++opt_help=false
++opt_quiet=false
++opt_verbose=false
++opt_warning=:
++
++# func_echo arg...
++# Echo program name prefixed message, along with the current mode
++# name if it has been set yet.
++func_echo ()
++{
++ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++}
++
++# func_verbose arg...
++# Echo program name prefixed message in verbose mode only.
++func_verbose ()
++{
++ $opt_verbose && func_echo ${1+"$@"}
++
++ # A bug in bash halts the script if the last line of a function
++ # fails when set -e is in force, so we need another command to
++ # work around that:
++ :
++}
++
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++ $ECHO "$*"
++}
++
++# func_error arg...
++# Echo program name prefixed message to standard error.
++func_error ()
++{
++ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++}
++
++# func_warning arg...
++# Echo program name prefixed warning message to standard error.
++func_warning ()
++{
++ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
++
++ # bash bug again:
++ :
++}
++
++# func_fatal_error arg...
++# Echo program name prefixed message to standard error, and exit.
++func_fatal_error ()
++{
++ func_error ${1+"$@"}
++ exit $EXIT_FAILURE
++}
++
++# func_fatal_help arg...
++# Echo program name prefixed message to standard error, followed by
++# a help hint, and exit.
++func_fatal_help ()
++{
++ func_error ${1+"$@"}
++ func_fatal_error "$help"
++}
++help="Try \`$progname --help' for more information." ## default
++
++
++# func_grep expression filename
++# Check whether EXPRESSION matches any line of FILENAME, without output.
++func_grep ()
++{
++ $GREP "$1" "$2" >/dev/null 2>&1
++}
++
++
++# func_mkdir_p directory-path
++# Make sure the entire path to DIRECTORY-PATH is available.
++func_mkdir_p ()
++{
++ my_directory_path="$1"
++ my_dir_list=
++
++ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
++
++ # Protect directory names starting with `-'
++ case $my_directory_path in
++ -*) my_directory_path="./$my_directory_path" ;;
++ esac
++
++ # While some portion of DIR does not yet exist...
++ while test ! -d "$my_directory_path"; do
++ # ...make a list in topmost first order. Use a colon delimited
++ # list incase some portion of path contains whitespace.
++ my_dir_list="$my_directory_path:$my_dir_list"
++
++ # If the last portion added has no slash in it, the list is done
++ case $my_directory_path in */*) ;; *) break ;; esac
++
++ # ...otherwise throw away the child directory and loop
++ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
++ done
++ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
++
++ save_mkdir_p_IFS="$IFS"; IFS=':'
++ for my_dir in $my_dir_list; do
++ IFS="$save_mkdir_p_IFS"
++ # mkdir can fail with a `File exist' error if two processes
++ # try to create one of the directories concurrently. Don't
++ # stop in that case!
++ $MKDIR "$my_dir" 2>/dev/null || :
++ done
++ IFS="$save_mkdir_p_IFS"
++
++ # Bail out if we (or some other process) failed to create a directory.
++ test -d "$my_directory_path" || \
++ func_fatal_error "Failed to create \`$1'"
++ fi
++}
++
++
++# func_mktempdir [string]
++# Make a temporary directory that won't clash with other running
++# libtool processes, and avoids race conditions if possible. If
++# given, STRING is the basename for that directory.
++func_mktempdir ()
++{
++ my_template="${TMPDIR-/tmp}/${1-$progname}"
++
++ if test "$opt_dry_run" = ":"; then
++ # Return a directory name, but don't create it in dry-run mode
++ my_tmpdir="${my_template}-$$"
++ else
++
++ # If mktemp works, use that first and foremost
++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
++
++ if test ! -d "$my_tmpdir"; then
++ # Failing that, at least try and use $RANDOM to avoid a race
++ my_tmpdir="${my_template}-${RANDOM-0}$$"
++
++ save_mktempdir_umask=`umask`
++ umask 0077
++ $MKDIR "$my_tmpdir"
++ umask $save_mktempdir_umask
++ fi
++
++ # If we're not in dry-run mode, bomb out on failure
++ test -d "$my_tmpdir" || \
++ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
++ fi
++
++ $ECHO "$my_tmpdir"
++}
++
++
++# func_quote_for_eval arg
++# Aesthetically quote ARG to be evaled later.
++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
++# is double-quoted, suitable for a subsequent eval, whereas
++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
++# which are still active within double quotes backslashified.
++func_quote_for_eval ()
++{
++ case $1 in
++ *[\\\`\"\$]*)
++ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
++ *)
++ func_quote_for_eval_unquoted_result="$1" ;;
++ esac
++
++ case $func_quote_for_eval_unquoted_result in
++ # Double-quote args containing shell metacharacters to delay
++ # word splitting, command substitution and and variable
++ # expansion for a subsequent eval.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
++ ;;
++ *)
++ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
++ esac
++}
++
++
++# func_quote_for_expand arg
++# Aesthetically quote ARG to be evaled later; same as above,
++# but do not quote variable references.
++func_quote_for_expand ()
++{
++ case $1 in
++ *[\\\`\"]*)
++ my_arg=`$ECHO "$1" | $SED \
++ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
++ *)
++ my_arg="$1" ;;
++ esac
++
++ case $my_arg in
++ # Double-quote args containing shell metacharacters to delay
++ # word splitting and command substitution for a subsequent eval.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ my_arg="\"$my_arg\""
++ ;;
++ esac
++
++ func_quote_for_expand_result="$my_arg"
++}
++
++
++# func_show_eval cmd [fail_exp]
++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
++# is given, then evaluate it.
++func_show_eval ()
++{
++ my_cmd="$1"
++ my_fail_exp="${2-:}"
++
++ ${opt_silent-false} || {
++ func_quote_for_expand "$my_cmd"
++ eval "func_echo $func_quote_for_expand_result"
++ }
++
++ if ${opt_dry_run-false}; then :; else
++ eval "$my_cmd"
++ my_status=$?
++ if test "$my_status" -eq 0; then :; else
++ eval "(exit $my_status); $my_fail_exp"
++ fi
++ fi
++}
++
++
++# func_show_eval_locale cmd [fail_exp]
++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
++# is given, then evaluate it. Use the saved locale for evaluation.
++func_show_eval_locale ()
++{
++ my_cmd="$1"
++ my_fail_exp="${2-:}"
++
++ ${opt_silent-false} || {
++ func_quote_for_expand "$my_cmd"
++ eval "func_echo $func_quote_for_expand_result"
++ }
++
++ if ${opt_dry_run-false}; then :; else
++ eval "$lt_user_locale
++ $my_cmd"
++ my_status=$?
++ eval "$lt_safe_locale"
++ if test "$my_status" -eq 0; then :; else
++ eval "(exit $my_status); $my_fail_exp"
++ fi
++ fi
++}
++
++# func_tr_sh
++# Turn $1 into a string suitable for a shell variable name.
++# Result is stored in $func_tr_sh_result. All characters
++# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
++# if $1 begins with a digit, a '_' is prepended as well.
++func_tr_sh ()
++{
++ case $1 in
++ [0-9]* | *[!a-zA-Z0-9_]*)
++ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
++ ;;
++ * )
++ func_tr_sh_result=$1
++ ;;
++ esac
++}
++
++
++# func_version
++# Echo version message to standard output and exit.
++func_version ()
++{
++ $opt_debug
++
++ $SED -n '/(C)/!b go
++ :more
++ /\./!{
++ N
++ s/\n# / /
++ b more
++ }
++ :go
++ /^# '$PROGRAM' (GNU /,/# warranty; / {
++ s/^# //
++ s/^# *$//
++ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
++ p
++ }' < "$progpath"
++ exit $?
++}
++
++# func_usage
++# Echo short help message to standard output and exit.
++func_usage ()
++{
++ $opt_debug
++
++ $SED -n '/^# Usage:/,/^# *.*--help/ {
++ s/^# //
++ s/^# *$//
++ s/\$progname/'$progname'/
++ p
++ }' < "$progpath"
++ echo
++ $ECHO "run \`$progname --help | more' for full usage"
++ exit $?
++}
++
++# func_help [NOEXIT]
++# Echo long help message to standard output and exit,
++# unless 'noexit' is passed as argument.
++func_help ()
++{
++ $opt_debug
++
++ $SED -n '/^# Usage:/,/# Report bugs to/ {
++ :print
++ s/^# //
++ s/^# *$//
++ s*\$progname*'$progname'*
++ s*\$host*'"$host"'*
++ s*\$SHELL*'"$SHELL"'*
++ s*\$LTCC*'"$LTCC"'*
++ s*\$LTCFLAGS*'"$LTCFLAGS"'*
++ s*\$LD*'"$LD"'*
++ s/\$with_gnu_ld/'"$with_gnu_ld"'/
++ s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
++ s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
++ p
++ d
++ }
++ /^# .* home page:/b print
++ /^# General help using/b print
++ ' < "$progpath"
++ ret=$?
++ if test -z "$1"; then
++ exit $ret
++ fi
++}
++
++# func_missing_arg argname
++# Echo program name prefixed message to standard error and set global
++# exit_cmd.
++func_missing_arg ()
++{
++ $opt_debug
++
++ func_error "missing argument for $1."
++ exit_cmd=exit
++}
++
++
++# func_split_short_opt shortopt
++# Set func_split_short_opt_name and func_split_short_opt_arg shell
++# variables after splitting SHORTOPT after the 2nd character.
++func_split_short_opt ()
++{
++ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
++ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
++
++ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
++ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
++} # func_split_short_opt may be replaced by extended shell implementation
++
++
++# func_split_long_opt longopt
++# Set func_split_long_opt_name and func_split_long_opt_arg shell
++# variables after splitting LONGOPT at the `=' sign.
++func_split_long_opt ()
++{
++ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
++ my_sed_long_arg='1s/^--[^=]*=//'
++
++ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
++ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
++} # func_split_long_opt may be replaced by extended shell implementation
++
++exit_cmd=:
++
++
++
++
++
++magic="%%%MAGIC variable%%%"
++magic_exe="%%%MAGIC EXE variable%%%"
++
++# Global variables.
++nonopt=
++preserve_args=
++lo2o="s/\\.lo\$/.${objext}/"
++o2lo="s/\\.${objext}\$/.lo/"
++extracted_archives=
++extracted_serial=0
++
++# If this variable is set in any of the actions, the command in it
++# will be execed at the end. This prevents here-documents from being
++# left over by shells.
++exec_cmd=
++
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++ eval "${1}=\$${1}\${2}"
++} # func_append may be replaced by extended shell implementation
++
++# func_append_quoted var value
++# Quote VALUE and append to the end of shell variable VAR, separated
++# by a space.
++func_append_quoted ()
++{
++ func_quote_for_eval "${2}"
++ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
++} # func_append_quoted may be replaced by extended shell implementation
++
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++ func_arith_result=`expr "${@}"`
++} # func_arith may be replaced by extended shell implementation
++
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
++} # func_len may be replaced by extended shell implementation
++
++
++# func_lo2o object
++func_lo2o ()
++{
++ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
++} # func_lo2o may be replaced by extended shell implementation
++
++
++# func_xform libobj-or-source
++func_xform ()
++{
++ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
++} # func_xform may be replaced by extended shell implementation
++
++
++# func_fatal_configuration arg...
++# Echo program name prefixed message to standard error, followed by
++# a configuration failure hint, and exit.
++func_fatal_configuration ()
++{
++ func_error ${1+"$@"}
++ func_error "See the $PACKAGE documentation for more information."
++ func_fatal_error "Fatal configuration error."
++}
++
++
++# func_config
++# Display the configuration for all the tags in this script.
++func_config ()
++{
++ re_begincf='^# ### BEGIN LIBTOOL'
++ re_endcf='^# ### END LIBTOOL'
++
++ # Default configuration.
++ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
++
++ # Now print the configurations for the tags.
++ for tagname in $taglist; do
++ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
++ done
++
++ exit $?
++}
++
++# func_features
++# Display the features supported by this script.
++func_features ()
++{
++ echo "host: $host"
++ if test "$build_libtool_libs" = yes; then
++ echo "enable shared libraries"
++ else
++ echo "disable shared libraries"
++ fi
++ if test "$build_old_libs" = yes; then
++ echo "enable static libraries"
++ else
++ echo "disable static libraries"
++ fi
++
++ exit $?
++}
++
++# func_enable_tag tagname
++# Verify that TAGNAME is valid, and either flag an error and exit, or
++# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
++# variable here.
++func_enable_tag ()
++{
++ # Global variable:
++ tagname="$1"
++
++ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
++ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
++ sed_extractcf="/$re_begincf/,/$re_endcf/p"
++
++ # Validate tagname.
++ case $tagname in
++ *[!-_A-Za-z0-9,/]*)
++ func_fatal_error "invalid tag name: $tagname"
++ ;;
++ esac
++
++ # Don't test for the "default" C tag, as we know it's
++ # there but not specially marked.
++ case $tagname in
++ CC) ;;
++ *)
++ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
++ taglist="$taglist $tagname"
++
++ # Evaluate the configuration. Be careful to quote the path
++ # and the sed script, to avoid splitting on whitespace, but
++ # also don't use non-portable quotes within backquotes within
++ # quotes we have to do it in 2 steps:
++ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
++ eval "$extractedcf"
++ else
++ func_error "ignoring unknown tag $tagname"
++ fi
++ ;;
++ esac
++}
++
++# func_check_version_match
++# Ensure that we are using m4 macros, and libtool script from the same
++# release of libtool.
++func_check_version_match ()
++{
++ if test "$package_revision" != "$macro_revision"; then
++ if test "$VERSION" != "$macro_version"; then
++ if test -z "$macro_version"; then
++ cat >&2 <<_LT_EOF
++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from an older release.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++ else
++ cat >&2 <<_LT_EOF
++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
++$progname: and run autoconf again.
++_LT_EOF
++ fi
++ else
++ cat >&2 <<_LT_EOF
++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
++$progname: but the definition of this LT_INIT comes from revision $macro_revision.
++$progname: You should recreate aclocal.m4 with macros from revision $package_revision
++$progname: of $PACKAGE $VERSION and run autoconf again.
++_LT_EOF
++ fi
++
++ exit $EXIT_MISMATCH
++ fi
++}
++
++
++# Shorthand for --mode=foo, only valid as the first argument
++case $1 in
++clean|clea|cle|cl)
++ shift; set dummy --mode clean ${1+"$@"}; shift
++ ;;
++compile|compil|compi|comp|com|co|c)
++ shift; set dummy --mode compile ${1+"$@"}; shift
++ ;;
++execute|execut|execu|exec|exe|ex|e)
++ shift; set dummy --mode execute ${1+"$@"}; shift
++ ;;
++finish|finis|fini|fin|fi|f)
++ shift; set dummy --mode finish ${1+"$@"}; shift
++ ;;
++install|instal|insta|inst|ins|in|i)
++ shift; set dummy --mode install ${1+"$@"}; shift
++ ;;
++link|lin|li|l)
++ shift; set dummy --mode link ${1+"$@"}; shift
++ ;;
++uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
++ shift; set dummy --mode uninstall ${1+"$@"}; shift
++ ;;
++esac
++
++
++
++# Option defaults:
++opt_debug=:
++opt_dry_run=false
++opt_config=false
++opt_preserve_dup_deps=false
++opt_features=false
++opt_finish=false
++opt_help=false
++opt_help_all=false
++opt_silent=:
++opt_warning=:
++opt_verbose=:
++opt_silent=false
++opt_verbose=false
++
++
++# Parse options once, thoroughly. This comes as soon as possible in the
++# script to make things like `--version' happen as quickly as we can.
++{
++ # this just eases exit handling
++ while test $# -gt 0; do
++ opt="$1"
++ shift
++ case $opt in
++ --debug|-x) opt_debug='set -x'
++ func_echo "enabling shell trace mode"
++ $opt_debug
++ ;;
++ --dry-run|--dryrun|-n)
++ opt_dry_run=:
++ ;;
++ --config)
++ opt_config=:
++func_config
++ ;;
++ --dlopen|-dlopen)
++ optarg="$1"
++ opt_dlopen="${opt_dlopen+$opt_dlopen
++}$optarg"
++ shift
++ ;;
++ --preserve-dup-deps)
++ opt_preserve_dup_deps=:
++ ;;
++ --features)
++ opt_features=:
++func_features
++ ;;
++ --finish)
++ opt_finish=:
++set dummy --mode finish ${1+"$@"}; shift
++ ;;
++ --help)
++ opt_help=:
++ ;;
++ --help-all)
++ opt_help_all=:
++opt_help=': help-all'
++ ;;
++ --mode)
++ test $# = 0 && func_missing_arg $opt && break
++ optarg="$1"
++ opt_mode="$optarg"
++case $optarg in
++ # Valid mode arguments:
++ clean|compile|execute|finish|install|link|relink|uninstall) ;;
++
++ # Catch anything else as an error
++ *) func_error "invalid argument for $opt"
++ exit_cmd=exit
++ break
++ ;;
++esac
++ shift
++ ;;
++ --no-silent|--no-quiet)
++ opt_silent=false
++func_append preserve_args " $opt"
++ ;;
++ --no-warning|--no-warn)
++ opt_warning=false
++func_append preserve_args " $opt"
++ ;;
++ --no-verbose)
++ opt_verbose=false
++func_append preserve_args " $opt"
++ ;;
++ --silent|--quiet)
++ opt_silent=:
++func_append preserve_args " $opt"
++ opt_verbose=false
++ ;;
++ --verbose|-v)
++ opt_verbose=:
++func_append preserve_args " $opt"
++opt_silent=false
++ ;;
++ --tag)
++ test $# = 0 && func_missing_arg $opt && break
++ optarg="$1"
++ opt_tag="$optarg"
++func_append preserve_args " $opt $optarg"
++func_enable_tag "$optarg"
++ shift
++ ;;
++
++ -\?|-h) func_usage ;;
++ --help) func_help ;;
++ --version) func_version ;;
++
++ # Separate optargs to long options:
++ --*=*)
++ func_split_long_opt "$opt"
++ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
++ shift
++ ;;
++
++ # Separate non-argument short options:
++ -\?*|-h*|-n*|-v*)
++ func_split_short_opt "$opt"
++ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
++ shift
++ ;;
++
++ --) break ;;
++ -*) func_fatal_help "unrecognized option \`$opt'" ;;
++ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
++ esac
++ done
++
++ # Validate options:
++
++ # save first non-option argument
++ if test "$#" -gt 0; then
++ nonopt="$opt"
++ shift
++ fi
++
++ # preserve --debug
++ test "$opt_debug" = : || func_append preserve_args " --debug"
++
++ case $host in
++ *cygwin* | *mingw* | *pw32* | *cegcc*)
++ # don't eliminate duplications in $postdeps and $predeps
++ opt_duplicate_compiler_generated_deps=:
++ ;;
++ *)
++ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
++ ;;
++ esac
++
++ $opt_help || {
++ # Sanity checks first:
++ func_check_version_match
++
++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++ func_fatal_configuration "not configured to build any kind of library"
++ fi
++
++ # Darwin sucks
++ eval std_shrext=\"$shrext_cmds\"
++
++ # Only execute mode is allowed to have -dlopen flags.
++ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
++ func_error "unrecognized option \`-dlopen'"
++ $ECHO "$help" 1>&2
++ exit $EXIT_FAILURE
++ fi
++
++ # Change the help message to a mode-specific one.
++ generic_help="$help"
++ help="Try \`$progname --help --mode=$opt_mode' for more information."
++ }
++
++
++ # Bail if the options were screwed
++ $exit_cmd $EXIT_FAILURE
++}
++
++
++
++
++## ----------- ##
++## Main. ##
++## ----------- ##
++
++# func_lalib_p file
++# True iff FILE is a libtool `.la' library or `.lo' object file.
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_lalib_p ()
++{
++ test -f "$1" &&
++ $SED -e 4q "$1" 2>/dev/null \
++ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
++}
++
++# func_lalib_unsafe_p file
++# True iff FILE is a libtool `.la' library or `.lo' object file.
++# This function implements the same check as func_lalib_p without
++# resorting to external programs. To this end, it redirects stdin and
++# closes it afterwards, without saving the original file descriptor.
++# As a safety measure, use it only where a negative result would be
++# fatal anyway. Works if `file' does not exist.
++func_lalib_unsafe_p ()
++{
++ lalib_p=no
++ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
++ for lalib_p_l in 1 2 3 4
++ do
++ read lalib_p_line
++ case "$lalib_p_line" in
++ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
++ esac
++ done
++ exec 0<&5 5<&-
++ fi
++ test "$lalib_p" = yes
++}
++
++# func_ltwrapper_script_p file
++# True iff FILE is a libtool wrapper script
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_script_p ()
++{
++ func_lalib_p "$1"
++}
++
++# func_ltwrapper_executable_p file
++# True iff FILE is a libtool wrapper executable
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_executable_p ()
++{
++ func_ltwrapper_exec_suffix=
++ case $1 in
++ *.exe) ;;
++ *) func_ltwrapper_exec_suffix=.exe ;;
++ esac
++ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
++}
++
++# func_ltwrapper_scriptname file
++# Assumes file is an ltwrapper_executable
++# uses $file to determine the appropriate filename for a
++# temporary ltwrapper_script.
++func_ltwrapper_scriptname ()
++{
++ func_dirname_and_basename "$1" "" "."
++ func_stripname '' '.exe' "$func_basename_result"
++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
++}
++
++# func_ltwrapper_p file
++# True iff FILE is a libtool wrapper script or wrapper executable
++# This function is only a basic sanity check; it will hardly flush out
++# determined imposters.
++func_ltwrapper_p ()
++{
++ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
++}
++
++
++# func_execute_cmds commands fail_cmd
++# Execute tilde-delimited COMMANDS.
++# If FAIL_CMD is given, eval that upon failure.
++# FAIL_CMD may read-access the current command in variable CMD!
++func_execute_cmds ()
++{
++ $opt_debug
++ save_ifs=$IFS; IFS='~'
++ for cmd in $1; do
++ IFS=$save_ifs
++ eval cmd=\"$cmd\"
++ func_show_eval "$cmd" "${2-:}"
++ done
++ IFS=$save_ifs
++}
++
++
++# func_source file
++# Source FILE, adding directory component if necessary.
++# Note that it is not necessary on cygwin/mingw to append a dot to
++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
++# behavior happens only for exec(3), not for open(2)! Also, sourcing
++# `FILE.' does not work on cygwin managed mounts.
++func_source ()
++{
++ $opt_debug
++ case $1 in
++ */* | *\\*) . "$1" ;;
++ *) . "./$1" ;;
++ esac
++}
++
++
++# func_resolve_sysroot PATH
++# Replace a leading = in PATH with a sysroot. Store the result into
++# func_resolve_sysroot_result
++func_resolve_sysroot ()
++{
++ func_resolve_sysroot_result=$1
++ case $func_resolve_sysroot_result in
++ =*)
++ func_stripname '=' '' "$func_resolve_sysroot_result"
++ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
++ ;;
++ esac
++}
++
++# func_replace_sysroot PATH
++# If PATH begins with the sysroot, replace it with = and
++# store the result into func_replace_sysroot_result.
++func_replace_sysroot ()
++{
++ case "$lt_sysroot:$1" in
++ ?*:"$lt_sysroot"*)
++ func_stripname "$lt_sysroot" '' "$1"
++ func_replace_sysroot_result="=$func_stripname_result"
++ ;;
++ *)
++ # Including no sysroot.
++ func_replace_sysroot_result=$1
++ ;;
++ esac
++}
++
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag ()
++{
++ $opt_debug
++ if test -n "$available_tags" && test -z "$tagname"; then
++ CC_quoted=
++ for arg in $CC; do
++ func_append_quoted CC_quoted "$arg"
++ done
++ CC_expanded=`func_echo_all $CC`
++ CC_quoted_expanded=`func_echo_all $CC_quoted`
++ case $@ in
++ # Blanks in the command may have been stripped by the calling shell,
++ # but not from the CC environment variable when configure was run.
++ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
++ # Blanks at the start of $base_compile will cause this to fail
++ # if we don't check for them as well.
++ *)
++ for z in $available_tags; do
++ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++ # Evaluate the configuration.
++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++ CC_quoted=
++ for arg in $CC; do
++ # Double-quote args containing other shell metacharacters.
++ func_append_quoted CC_quoted "$arg"
++ done
++ CC_expanded=`func_echo_all $CC`
++ CC_quoted_expanded=`func_echo_all $CC_quoted`
++ case "$@ " in
++ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
++ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
++ # The compiler in the base compile command matches
++ # the one in the tagged configuration.
++ # Assume this is the tagged configuration we want.
++ tagname=$z
++ break
++ ;;
++ esac
++ fi
++ done
++ # If $tagname still isn't set, then no tagged configuration
++ # was found and let the user know that the "--tag" command
++ # line option must be used.
++ if test -z "$tagname"; then
++ func_echo "unable to infer tagged configuration"
++ func_fatal_error "specify a tag with \`--tag'"
++# else
++# func_verbose "using $tagname tagged configuration"
++ fi
++ ;;
++ esac
++ fi
++}
++
++
++
++# func_write_libtool_object output_name pic_name nonpic_name
++# Create a libtool object file (analogous to a ".la" file),
++# but don't create it if we're doing a dry run.
++func_write_libtool_object ()
++{
++ write_libobj=${1}
++ if test "$build_libtool_libs" = yes; then
++ write_lobj=\'${2}\'
++ else
++ write_lobj=none
++ fi
++
++ if test "$build_old_libs" = yes; then
++ write_oldobj=\'${3}\'
++ else
++ write_oldobj=none
++ fi
++
++ $opt_dry_run || {
++ cat >${write_libobj}T <<EOF
++# $write_libobj - a libtool object file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# Name of the PIC object.
++pic_object=$write_lobj
++
++# Name of the non-PIC object
++non_pic_object=$write_oldobj
++
++EOF
++ $MV "${write_libobj}T" "${write_libobj}"
++ }
++}
++
++
++##################################################
++# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
++##################################################
++
++# func_convert_core_file_wine_to_w32 ARG
++# Helper function used by file name conversion functions when $build is *nix,
++# and $host is mingw, cygwin, or some other w32 environment. Relies on a
++# correctly configured wine environment available, with the winepath program
++# in $build's $PATH.
++#
++# ARG is the $build file name to be converted to w32 format.
++# Result is available in $func_convert_core_file_wine_to_w32_result, and will
++# be empty on error (or when ARG is empty)
++func_convert_core_file_wine_to_w32 ()
++{
++ $opt_debug
++ func_convert_core_file_wine_to_w32_result="$1"
++ if test -n "$1"; then
++ # Unfortunately, winepath does not exit with a non-zero error code, so we
++ # are forced to check the contents of stdout. On the other hand, if the
++ # command is not found, the shell will set an exit code of 127 and print
++ # *an error message* to stdout. So we must check for both error code of
++ # zero AND non-empty stdout, which explains the odd construction:
++ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
++ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
++ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
++ $SED -e "$lt_sed_naive_backslashify"`
++ else
++ func_convert_core_file_wine_to_w32_result=
++ fi
++ fi
++}
++# end: func_convert_core_file_wine_to_w32
++
++
++# func_convert_core_path_wine_to_w32 ARG
++# Helper function used by path conversion functions when $build is *nix, and
++# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
++# configured wine environment available, with the winepath program in $build's
++# $PATH. Assumes ARG has no leading or trailing path separator characters.
++#
++# ARG is path to be converted from $build format to win32.
++# Result is available in $func_convert_core_path_wine_to_w32_result.
++# Unconvertible file (directory) names in ARG are skipped; if no directory names
++# are convertible, then the result may be empty.
++func_convert_core_path_wine_to_w32 ()
++{
++ $opt_debug
++ # unfortunately, winepath doesn't convert paths, only file names
++ func_convert_core_path_wine_to_w32_result=""
++ if test -n "$1"; then
++ oldIFS=$IFS
++ IFS=:
++ for func_convert_core_path_wine_to_w32_f in $1; do
++ IFS=$oldIFS
++ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
++ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
++ if test -z "$func_convert_core_path_wine_to_w32_result"; then
++ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
++ else
++ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
++ fi
++ fi
++ done
++ IFS=$oldIFS
++ fi
++}
++# end: func_convert_core_path_wine_to_w32
++
++
++# func_cygpath ARGS...
++# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
++# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
++# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
++# (2), returns the Cygwin file name or path in func_cygpath_result (input
++# file name or path is assumed to be in w32 format, as previously converted
++# from $build's *nix or MSYS format). In case (3), returns the w32 file name
++# or path in func_cygpath_result (input file name or path is assumed to be in
++# Cygwin format). Returns an empty string on error.
++#
++# ARGS are passed to cygpath, with the last one being the file name or path to
++# be converted.
++#
++# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
++# environment variable; do not put it in $PATH.
++func_cygpath ()
++{
++ $opt_debug
++ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
++ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
++ if test "$?" -ne 0; then
++ # on failure, ensure result is empty
++ func_cygpath_result=
++ fi
++ else
++ func_cygpath_result=
++ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
++ fi
++}
++#end: func_cygpath
++
++
++# func_convert_core_msys_to_w32 ARG
++# Convert file name or path ARG from MSYS format to w32 format. Return
++# result in func_convert_core_msys_to_w32_result.
++func_convert_core_msys_to_w32 ()
++{
++ $opt_debug
++ # awkward: cmd appends spaces to result
++ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
++ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
++}
++#end: func_convert_core_msys_to_w32
++
++
++# func_convert_file_check ARG1 ARG2
++# Verify that ARG1 (a file name in $build format) was converted to $host
++# format in ARG2. Otherwise, emit an error message, but continue (resetting
++# func_to_host_file_result to ARG1).
++func_convert_file_check ()
++{
++ $opt_debug
++ if test -z "$2" && test -n "$1" ; then
++ func_error "Could not determine host file name corresponding to"
++ func_error " \`$1'"
++ func_error "Continuing, but uninstalled executables may not work."
++ # Fallback:
++ func_to_host_file_result="$1"
++ fi
++}
++# end func_convert_file_check
++
++
++# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
++# Verify that FROM_PATH (a path in $build format) was converted to $host
++# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
++# func_to_host_file_result to a simplistic fallback value (see below).
++func_convert_path_check ()
++{
++ $opt_debug
++ if test -z "$4" && test -n "$3"; then
++ func_error "Could not determine the host path corresponding to"
++ func_error " \`$3'"
++ func_error "Continuing, but uninstalled executables may not work."
++ # Fallback. This is a deliberately simplistic "conversion" and
++ # should not be "improved". See libtool.info.
++ if test "x$1" != "x$2"; then
++ lt_replace_pathsep_chars="s|$1|$2|g"
++ func_to_host_path_result=`echo "$3" |
++ $SED -e "$lt_replace_pathsep_chars"`
++ else
++ func_to_host_path_result="$3"
++ fi
++ fi
++}
++# end func_convert_path_check
++
++
++# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
++# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
++# and appending REPL if ORIG matches BACKPAT.
++func_convert_path_front_back_pathsep ()
++{
++ $opt_debug
++ case $4 in
++ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
++ ;;
++ esac
++ case $4 in
++ $2 ) func_append func_to_host_path_result "$3"
++ ;;
++ esac
++}
++# end func_convert_path_front_back_pathsep
++
++
++##################################################
++# $build to $host FILE NAME CONVERSION FUNCTIONS #
++##################################################
++# invoked via `$to_host_file_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# Result will be available in $func_to_host_file_result.
++
++
++# func_to_host_file ARG
++# Converts the file name ARG from $build format to $host format. Return result
++# in func_to_host_file_result.
++func_to_host_file ()
++{
++ $opt_debug
++ $to_host_file_cmd "$1"
++}
++# end func_to_host_file
++
++
++# func_to_tool_file ARG LAZY
++# converts the file name ARG from $build format to toolchain format. Return
++# result in func_to_tool_file_result. If the conversion in use is listed
++# in (the comma separated) LAZY, no conversion takes place.
++func_to_tool_file ()
++{
++ $opt_debug
++ case ,$2, in
++ *,"$to_tool_file_cmd",*)
++ func_to_tool_file_result=$1
++ ;;
++ *)
++ $to_tool_file_cmd "$1"
++ func_to_tool_file_result=$func_to_host_file_result
++ ;;
++ esac
++}
++# end func_to_tool_file
++
++
++# func_convert_file_noop ARG
++# Copy ARG to func_to_host_file_result.
++func_convert_file_noop ()
++{
++ func_to_host_file_result="$1"
++}
++# end func_convert_file_noop
++
++
++# func_convert_file_msys_to_w32 ARG
++# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper. Returns result in
++# func_to_host_file_result.
++func_convert_file_msys_to_w32 ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ func_convert_core_msys_to_w32 "$1"
++ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_w32
++
++
++# func_convert_file_cygwin_to_w32 ARG
++# Convert file name ARG from Cygwin to w32 format. Returns result in
++# func_to_host_file_result.
++func_convert_file_cygwin_to_w32 ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
++ # LT_CYGPATH in this case.
++ func_to_host_file_result=`cygpath -m "$1"`
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_cygwin_to_w32
++
++
++# func_convert_file_nix_to_w32 ARG
++# Convert file name ARG from *nix to w32 format. Requires a wine environment
++# and a working winepath. Returns result in func_to_host_file_result.
++func_convert_file_nix_to_w32 ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ func_convert_core_file_wine_to_w32 "$1"
++ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_w32
++
++
++# func_convert_file_msys_to_cygwin ARG
++# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_file_msys_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ func_convert_core_msys_to_w32 "$1"
++ func_cygpath -u "$func_convert_core_msys_to_w32_result"
++ func_to_host_file_result="$func_cygpath_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_msys_to_cygwin
++
++
++# func_convert_file_nix_to_cygwin ARG
++# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
++# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
++# in func_to_host_file_result.
++func_convert_file_nix_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_file_result="$1"
++ if test -n "$1"; then
++ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
++ func_convert_core_file_wine_to_w32 "$1"
++ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
++ func_to_host_file_result="$func_cygpath_result"
++ fi
++ func_convert_file_check "$1" "$func_to_host_file_result"
++}
++# end func_convert_file_nix_to_cygwin
++
++
++#############################################
++# $build to $host PATH CONVERSION FUNCTIONS #
++#############################################
++# invoked via `$to_host_path_cmd ARG'
++#
++# In each case, ARG is the path to be converted from $build to $host format.
++# The result will be available in $func_to_host_path_result.
++#
++# Path separators are also converted from $build format to $host format. If
++# ARG begins or ends with a path separator character, it is preserved (but
++# converted to $host format) on output.
++#
++# All path conversion functions are named using the following convention:
++# file name conversion function : func_convert_file_X_to_Y ()
++# path conversion function : func_convert_path_X_to_Y ()
++# where, for any given $build/$host combination the 'X_to_Y' value is the
++# same. If conversion functions are added for new $build/$host combinations,
++# the two new functions must follow this pattern, or func_init_to_host_path_cmd
++# will break.
++
++
++# func_init_to_host_path_cmd
++# Ensures that function "pointer" variable $to_host_path_cmd is set to the
++# appropriate value, based on the value of $to_host_file_cmd.
++to_host_path_cmd=
++func_init_to_host_path_cmd ()
++{
++ $opt_debug
++ if test -z "$to_host_path_cmd"; then
++ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
++ to_host_path_cmd="func_convert_path_${func_stripname_result}"
++ fi
++}
++
++
++# func_to_host_path ARG
++# Converts the path ARG from $build format to $host format. Return result
++# in func_to_host_path_result.
++func_to_host_path ()
++{
++ $opt_debug
++ func_init_to_host_path_cmd
++ $to_host_path_cmd "$1"
++}
++# end func_to_host_path
++
++
++# func_convert_path_noop ARG
++# Copy ARG to func_to_host_path_result.
++func_convert_path_noop ()
++{
++ func_to_host_path_result="$1"
++}
++# end func_convert_path_noop
++
++
++# func_convert_path_msys_to_w32 ARG
++# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
++# conversion to w32 is not available inside the cwrapper. Returns result in
++# func_to_host_path_result.
++func_convert_path_msys_to_w32 ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # Remove leading and trailing path separator characters from ARG. MSYS
++ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
++ # and winepath ignores them completely.
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
++ func_convert_path_check : ";" \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++ fi
++}
++# end func_convert_path_msys_to_w32
++
++
++# func_convert_path_cygwin_to_w32 ARG
++# Convert path ARG from Cygwin to w32 format. Returns result in
++# func_to_host_file_result.
++func_convert_path_cygwin_to_w32 ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # See func_convert_path_msys_to_w32:
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
++ func_convert_path_check : ";" \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++ fi
++}
++# end func_convert_path_cygwin_to_w32
++
++
++# func_convert_path_nix_to_w32 ARG
++# Convert path ARG from *nix to w32 format. Requires a wine environment and
++# a working winepath. Returns result in func_to_host_file_result.
++func_convert_path_nix_to_w32 ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # See func_convert_path_msys_to_w32:
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
++ func_convert_path_check : ";" \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
++ fi
++}
++# end func_convert_path_nix_to_w32
++
++
++# func_convert_path_msys_to_cygwin ARG
++# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
++# Returns result in func_to_host_file_result.
++func_convert_path_msys_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # See func_convert_path_msys_to_w32:
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
++ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
++ func_to_host_path_result="$func_cygpath_result"
++ func_convert_path_check : : \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++ fi
++}
++# end func_convert_path_msys_to_cygwin
++
++
++# func_convert_path_nix_to_cygwin ARG
++# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
++# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
++# func_to_host_file_result.
++func_convert_path_nix_to_cygwin ()
++{
++ $opt_debug
++ func_to_host_path_result="$1"
++ if test -n "$1"; then
++ # Remove leading and trailing path separator characters from
++ # ARG. msys behavior is inconsistent here, cygpath turns them
++ # into '.;' and ';.', and winepath ignores them completely.
++ func_stripname : : "$1"
++ func_to_host_path_tmp1=$func_stripname_result
++ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
++ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
++ func_to_host_path_result="$func_cygpath_result"
++ func_convert_path_check : : \
++ "$func_to_host_path_tmp1" "$func_to_host_path_result"
++ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
++ fi
++}
++# end func_convert_path_nix_to_cygwin
++
++
++# func_mode_compile arg...
++func_mode_compile ()
++{
++ $opt_debug
++ # Get the compilation command and the source file.
++ base_compile=
++ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
++ suppress_opt=yes
++ suppress_output=
++ arg_mode=normal
++ libobj=
++ later=
++ pie_flag=
++
++ for arg
++ do
++ case $arg_mode in
++ arg )
++ # do not "continue". Instead, add this to base_compile
++ lastarg="$arg"
++ arg_mode=normal
++ ;;
++
++ target )
++ libobj="$arg"
++ arg_mode=normal
++ continue
++ ;;
++
++ normal )
++ # Accept any command-line options.
++ case $arg in
++ -o)
++ test -n "$libobj" && \
++ func_fatal_error "you cannot specify \`-o' more than once"
++ arg_mode=target
++ continue
++ ;;
++
++ -pie | -fpie | -fPIE)
++ func_append pie_flag " $arg"
++ continue
++ ;;
++
++ -shared | -static | -prefer-pic | -prefer-non-pic)
++ func_append later " $arg"
++ continue
++ ;;
++
++ -no-suppress)
++ suppress_opt=no
++ continue
++ ;;
++
++ -Xcompiler)
++ arg_mode=arg # the next one goes into the "base_compile" arg list
++ continue # The current "srcfile" will either be retained or
++ ;; # replaced later. I would guess that would be a bug.
++
++ -Wc,*)
++ func_stripname '-Wc,' '' "$arg"
++ args=$func_stripname_result
++ lastarg=
++ save_ifs="$IFS"; IFS=','
++ for arg in $args; do
++ IFS="$save_ifs"
++ func_append_quoted lastarg "$arg"
++ done
++ IFS="$save_ifs"
++ func_stripname ' ' '' "$lastarg"
++ lastarg=$func_stripname_result
++
++ # Add the arguments to base_compile.
++ func_append base_compile " $lastarg"
++ continue
++ ;;
++
++ *)
++ # Accept the current argument as the source file.
++ # The previous "srcfile" becomes the current argument.
++ #
++ lastarg="$srcfile"
++ srcfile="$arg"
++ ;;
++ esac # case $arg
++ ;;
++ esac # case $arg_mode
++
++ # Aesthetically quote the previous argument.
++ func_append_quoted base_compile "$lastarg"
++ done # for arg
++
++ case $arg_mode in
++ arg)
++ func_fatal_error "you must specify an argument for -Xcompile"
++ ;;
++ target)
++ func_fatal_error "you must specify a target with \`-o'"
++ ;;
++ *)
++ # Get the name of the library object.
++ test -z "$libobj" && {
++ func_basename "$srcfile"
++ libobj="$func_basename_result"
++ }
++ ;;
++ esac
++
++ # Recognize several different file suffixes.
++ # If the user specifies -o file.o, it is replaced with file.lo
++ case $libobj in
++ *.[cCFSifmso] | \
++ *.ada | *.adb | *.ads | *.asm | \
++ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
++ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
++ func_xform "$libobj"
++ libobj=$func_xform_result
++ ;;
++ esac
++
++ case $libobj in
++ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
++ *)
++ func_fatal_error "cannot determine name of library object from \`$libobj'"
++ ;;
++ esac
++
++ func_infer_tag $base_compile
++
++ for arg in $later; do
++ case $arg in
++ -shared)
++ test "$build_libtool_libs" != yes && \
++ func_fatal_configuration "can not build a shared library"
++ build_old_libs=no
++ continue
++ ;;
++
++ -static)
++ build_libtool_libs=no
++ build_old_libs=yes
++ continue
++ ;;
++
++ -prefer-pic)
++ pic_mode=yes
++ continue
++ ;;
++
++ -prefer-non-pic)
++ pic_mode=no
++ continue
++ ;;
++ esac
++ done
++
++ func_quote_for_eval "$libobj"
++ test "X$libobj" != "X$func_quote_for_eval_result" \
++ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
++ && func_warning "libobj name \`$libobj' may not contain shell special characters."
++ func_dirname_and_basename "$obj" "/" ""
++ objname="$func_basename_result"
++ xdir="$func_dirname_result"
++ lobj=${xdir}$objdir/$objname
++
++ test -z "$base_compile" && \
++ func_fatal_help "you must specify a compilation command"
++
++ # Delete any leftover library objects.
++ if test "$build_old_libs" = yes; then
++ removelist="$obj $lobj $libobj ${libobj}T"
++ else
++ removelist="$lobj $libobj ${libobj}T"
++ fi
++
++ # On Cygwin there's no "real" PIC flag so we must build both object types
++ case $host_os in
++ cygwin* | mingw* | pw32* | os2* | cegcc*)
++ pic_mode=default
++ ;;
++ esac
++ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
++ # non-PIC code in shared libraries is not supported
++ pic_mode=default
++ fi
++
++ # Calculate the filename of the output object if compiler does
++ # not support -o with -c
++ if test "$compiler_c_o" = no; then
++ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
++ lockfile="$output_obj.lock"
++ else
++ output_obj=
++ need_locks=no
++ lockfile=
++ fi
++
++ # Lock this critical section if it is needed
++ # We use this script file to make the link, it avoids creating a new file
++ if test "$need_locks" = yes; then
++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++ func_echo "Waiting for $lockfile to be removed"
++ sleep 2
++ done
++ elif test "$need_locks" = warn; then
++ if test -f "$lockfile"; then
++ $ECHO "\
++*** ERROR, $lockfile exists and contains:
++`cat $lockfile 2>/dev/null`
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $opt_dry_run || $RM $removelist
++ exit $EXIT_FAILURE
++ fi
++ func_append removelist " $output_obj"
++ $ECHO "$srcfile" > "$lockfile"
++ fi
++
++ $opt_dry_run || $RM $removelist
++ func_append removelist " $lockfile"
++ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
++
++ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
++ srcfile=$func_to_tool_file_result
++ func_quote_for_eval "$srcfile"
++ qsrcfile=$func_quote_for_eval_result
++
++ # Only build a PIC object if we are building libtool libraries.
++ if test "$build_libtool_libs" = yes; then
++ # Without this assignment, base_compile gets emptied.
++ fbsd_hideous_sh_bug=$base_compile
++
++ if test "$pic_mode" != no; then
++ command="$base_compile $qsrcfile $pic_flag"
++ else
++ # Don't build PIC code
++ command="$base_compile $qsrcfile"
++ fi
++
++ func_mkdir_p "$xdir$objdir"
++
++ if test -z "$output_obj"; then
++ # Place PIC objects in $objdir
++ func_append command " -o $lobj"
++ fi
++
++ func_show_eval_locale "$command" \
++ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
++
++ if test "$need_locks" = warn &&
++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++ $ECHO "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
++
++but it should contain:
++$srcfile
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $opt_dry_run || $RM $removelist
++ exit $EXIT_FAILURE
++ fi
++
++ # Just move the object if needed, then go on to compile the next one
++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
++ func_show_eval '$MV "$output_obj" "$lobj"' \
++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
++ fi
++
++ # Allow error messages only from the first compilation.
++ if test "$suppress_opt" = yes; then
++ suppress_output=' >/dev/null 2>&1'
++ fi
++ fi
++
++ # Only build a position-dependent object if we build old libraries.
++ if test "$build_old_libs" = yes; then
++ if test "$pic_mode" != yes; then
++ # Don't build PIC code
++ command="$base_compile $qsrcfile$pie_flag"
++ else
++ command="$base_compile $qsrcfile $pic_flag"
++ fi
++ if test "$compiler_c_o" = yes; then
++ func_append command " -o $obj"
++ fi
++
++ # Suppress compiler output if we already did a PIC compilation.
++ func_append command "$suppress_output"
++ func_show_eval_locale "$command" \
++ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
++
++ if test "$need_locks" = warn &&
++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++ $ECHO "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
++
++but it should contain:
++$srcfile
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $opt_dry_run || $RM $removelist
++ exit $EXIT_FAILURE
++ fi
++
++ # Just move the object if needed
++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
++ func_show_eval '$MV "$output_obj" "$obj"' \
++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
++ fi
++ fi
++
++ $opt_dry_run || {
++ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
++
++ # Unlock the critical section if it was locked
++ if test "$need_locks" != no; then
++ removelist=$lockfile
++ $RM "$lockfile"
++ fi
++ }
++
++ exit $EXIT_SUCCESS
++}
++
++$opt_help || {
++ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
++}
++
++func_mode_help ()
++{
++ # We need to display help for each of the modes.
++ case $opt_mode in
++ "")
++ # Generic help is extracted from the usage comments
++ # at the start of this file.
++ func_help
++ ;;
++
++ clean)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
++
++Remove files from the build directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, object or program, all the files associated
++with it are deleted. Otherwise, only FILE itself is deleted using RM."
++ ;;
++
++ compile)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
++
++Compile a source file into a libtool library object.
++
++This mode accepts the following additional options:
++
++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
++ -no-suppress do not suppress compiler output for multiple passes
++ -prefer-pic try to build PIC objects only
++ -prefer-non-pic try to build non-PIC objects only
++ -shared do not build a \`.o' file suitable for static linking
++ -static only build a \`.o' file suitable for static linking
++ -Wc,FLAG pass FLAG directly to the compiler
++
++COMPILE-COMMAND is a command to be used in creating a \`standard' object file
++from the given SOURCEFILE.
++
++The output file name is determined by removing the directory component from
++SOURCEFILE, then substituting the C source code suffix \`.c' with the
++library object suffix, \`.lo'."
++ ;;
++
++ execute)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
++
++Automatically set library path, then run a program.
++
++This mode accepts the following additional options:
++
++ -dlopen FILE add the directory containing FILE to the library path
++
++This mode sets the library path environment variable according to \`-dlopen'
++flags.
++
++If any of the ARGS are libtool executable wrappers, then they are translated
++into their corresponding uninstalled binary, and any of their required library
++directories are added to the library path.
++
++Then, COMMAND is executed, with ARGS as arguments."
++ ;;
++
++ finish)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
++
++Complete the installation of libtool libraries.
++
++Each LIBDIR is a directory that contains libtool libraries.
++
++The commands that this mode executes may require superuser privileges. Use
++the \`--dry-run' option if you just want to see what would be executed."
++ ;;
++
++ install)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
++
++Install executables or libraries.
++
++INSTALL-COMMAND is the installation command. The first component should be
++either the \`install' or \`cp' program.
++
++The following components of INSTALL-COMMAND are treated specially:
++
++ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
++
++The rest of the components are interpreted as arguments to that command (only
++BSD-compatible install options are recognized)."
++ ;;
++
++ link)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
++
++Link object files or libraries together to form another library, or to
++create an executable program.
++
++LINK-COMMAND is a command using the C compiler that you would use to create
++a program from several object files.
++
++The following components of LINK-COMMAND are treated specially:
++
++ -all-static do not do any dynamic linking at all
++ -avoid-version do not add a version suffix if possible
++ -bindir BINDIR specify path to binaries directory (for systems where
++ libraries must be found in the PATH setting at runtime)
++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
++ -export-symbols SYMFILE
++ try to export only the symbols listed in SYMFILE
++ -export-symbols-regex REGEX
++ try to export only the symbols matching REGEX
++ -LLIBDIR search LIBDIR for required installed libraries
++ -lNAME OUTPUT-FILE requires the installed library libNAME
++ -module build a library that can dlopened
++ -no-fast-install disable the fast-install mode
++ -no-install link a not-installable executable
++ -no-undefined declare that a library does not refer to external symbols
++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
++ -objectlist FILE Use a list of object files found in FILE to specify objects
++ -precious-files-regex REGEX
++ don't remove output files matching REGEX
++ -release RELEASE specify package release information
++ -rpath LIBDIR the created library will eventually be installed in LIBDIR
++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
++ -shared only do dynamic linking of libtool libraries
++ -shrext SUFFIX override the standard shared library file extension
++ -static do not do any dynamic linking of uninstalled libtool libraries
++ -static-libtool-libs
++ do not do any dynamic linking of libtool libraries
++ -version-info CURRENT[:REVISION[:AGE]]
++ specify library version info [each variable defaults to 0]
++ -weak LIBNAME declare that the target provides the LIBNAME interface
++ -Wc,FLAG
++ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
++ -Wl,FLAG
++ -Xlinker FLAG pass linker-specific FLAG directly to the linker
++ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
++
++All other options (arguments beginning with \`-') are ignored.
++
++Every other argument is treated as a filename. Files ending in \`.la' are
++treated as uninstalled libtool libraries, other files are standard or library
++object files.
++
++If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
++only library objects (\`.lo' files) may be specified, and \`-rpath' is
++required, except when creating a convenience library.
++
++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
++using \`ar' and \`ranlib', or on Windows using \`lib'.
++
++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
++is created, otherwise an executable program is created."
++ ;;
++
++ uninstall)
++ $ECHO \
++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
++
++Remove libraries from an installation directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, all the files associated with it are deleted.
++Otherwise, only FILE itself is deleted using RM."
++ ;;
++
++ *)
++ func_fatal_help "invalid operation mode \`$opt_mode'"
++ ;;
++ esac
++
++ echo
++ $ECHO "Try \`$progname --help' for more information about other modes."
++}
++
++# Now that we've collected a possible --mode arg, show help if necessary
++if $opt_help; then
++ if test "$opt_help" = :; then
++ func_mode_help
++ else
++ {
++ func_help noexit
++ for opt_mode in compile link execute install finish uninstall clean; do
++ func_mode_help
++ done
++ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
++ {
++ func_help noexit
++ for opt_mode in compile link execute install finish uninstall clean; do
++ echo
++ func_mode_help
++ done
++ } |
++ sed '1d
++ /^When reporting/,/^Report/{
++ H
++ d
++ }
++ $x
++ /information about other modes/d
++ /more detailed .*MODE/d
++ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
++ fi
++ exit $?
++fi
++
++
++# func_mode_execute arg...
++func_mode_execute ()
++{
++ $opt_debug
++ # The first argument is the command name.
++ cmd="$nonopt"
++ test -z "$cmd" && \
++ func_fatal_help "you must specify a COMMAND"
++
++ # Handle -dlopen flags immediately.
++ for file in $opt_dlopen; do
++ test -f "$file" \
++ || func_fatal_help "\`$file' is not a file"
++
++ dir=
++ case $file in
++ *.la)
++ func_resolve_sysroot "$file"
++ file=$func_resolve_sysroot_result
++
++ # Check to see that this really is a libtool archive.
++ func_lalib_unsafe_p "$file" \
++ || func_fatal_help "\`$lib' is not a valid libtool archive"
++
++ # Read the libtool library.
++ dlname=
++ library_names=
++ func_source "$file"
++
++ # Skip this library if it cannot be dlopened.
++ if test -z "$dlname"; then
++ # Warn if it was a shared library.
++ test -n "$library_names" && \
++ func_warning "\`$file' was not linked with \`-export-dynamic'"
++ continue
++ fi
++
++ func_dirname "$file" "" "."
++ dir="$func_dirname_result"
++
++ if test -f "$dir/$objdir/$dlname"; then
++ func_append dir "/$objdir"
++ else
++ if test ! -f "$dir/$dlname"; then
++ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
++ fi
++ fi
++ ;;
++
++ *.lo)
++ # Just add the directory containing the .lo file.
++ func_dirname "$file" "" "."
++ dir="$func_dirname_result"
++ ;;
++
++ *)
++ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
++ continue
++ ;;
++ esac
++
++ # Get the absolute pathname.
++ absdir=`cd "$dir" && pwd`
++ test -n "$absdir" && dir="$absdir"
++
++ # Now add the directory to shlibpath_var.
++ if eval "test -z \"\$$shlibpath_var\""; then
++ eval "$shlibpath_var=\"\$dir\""
++ else
++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
++ fi
++ done
++
++ # This variable tells wrapper scripts just to set shlibpath_var
++ # rather than running their programs.
++ libtool_execute_magic="$magic"
++
++ # Check if any of the arguments is a wrapper script.
++ args=
++ for file
++ do
++ case $file in
++ -* | *.la | *.lo ) ;;
++ *)
++ # Do a test to see if this is really a libtool program.
++ if func_ltwrapper_script_p "$file"; then
++ func_source "$file"
++ # Transform arg to wrapped name.
++ file="$progdir/$program"
++ elif func_ltwrapper_executable_p "$file"; then
++ func_ltwrapper_scriptname "$file"
++ func_source "$func_ltwrapper_scriptname_result"
++ # Transform arg to wrapped name.
++ file="$progdir/$program"
++ fi
++ ;;
++ esac
++ # Quote arguments (to preserve shell metacharacters).
++ func_append_quoted args "$file"
++ done
++
++ if test "X$opt_dry_run" = Xfalse; then
++ if test -n "$shlibpath_var"; then
++ # Export the shlibpath_var.
++ eval "export $shlibpath_var"
++ fi
++
++ # Restore saved environment variables
++ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++ do
++ eval "if test \"\${save_$lt_var+set}\" = set; then
++ $lt_var=\$save_$lt_var; export $lt_var
++ else
++ $lt_unset $lt_var
++ fi"
++ done
++
++ # Now prepare to actually exec the command.
++ exec_cmd="\$cmd$args"
++ else
++ # Display what would be done.
++ if test -n "$shlibpath_var"; then
++ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
++ echo "export $shlibpath_var"
++ fi
++ $ECHO "$cmd$args"
++ exit $EXIT_SUCCESS
++ fi
++}
++
++test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
++
++
++# func_mode_finish arg...
++func_mode_finish ()
++{
++ $opt_debug
++ libs=
++ libdirs=
++ admincmds=
++
++ for opt in "$nonopt" ${1+"$@"}
++ do
++ if test -d "$opt"; then
++ func_append libdirs " $opt"
++
++ elif test -f "$opt"; then
++ if func_lalib_unsafe_p "$opt"; then
++ func_append libs " $opt"
++ else
++ func_warning "\`$opt' is not a valid libtool archive"
++ fi
++
++ else
++ func_fatal_error "invalid argument \`$opt'"
++ fi
++ done
++
++ if test -n "$libs"; then
++ if test -n "$lt_sysroot"; then
++ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
++ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
++ else
++ sysroot_cmd=
++ fi
++
++ # Remove sysroot references
++ if $opt_dry_run; then
++ for lib in $libs; do
++ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
++ done
++ else
++ tmpdir=`func_mktempdir`
++ for lib in $libs; do
++ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
++ > $tmpdir/tmp-la
++ mv -f $tmpdir/tmp-la $lib
++ done
++ ${RM}r "$tmpdir"
++ fi
++ fi
++
++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++ for libdir in $libdirs; do
++ if test -n "$finish_cmds"; then
++ # Do each command in the finish commands.
++ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
++'"$cmd"'"'
++ fi
++ if test -n "$finish_eval"; then
++ # Do the single finish_eval.
++ eval cmds=\"$finish_eval\"
++ $opt_dry_run || eval "$cmds" || func_append admincmds "
++ $cmds"
++ fi
++ done
++ fi
++
++ # Exit here if they wanted silent mode.
++ $opt_silent && exit $EXIT_SUCCESS
++
++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++ echo "----------------------------------------------------------------------"
++ echo "Libraries have been installed in:"
++ for libdir in $libdirs; do
++ $ECHO " $libdir"
++ done
++ echo
++ echo "If you ever happen to want to link against installed libraries"
++ echo "in a given directory, LIBDIR, you must either use libtool, and"
++ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++ echo "flag during linking and do at least one of the following:"
++ if test -n "$shlibpath_var"; then
++ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
++ echo " during execution"
++ fi
++ if test -n "$runpath_var"; then
++ echo " - add LIBDIR to the \`$runpath_var' environment variable"
++ echo " during linking"
++ fi
++ if test -n "$hardcode_libdir_flag_spec"; then
++ libdir=LIBDIR
++ eval flag=\"$hardcode_libdir_flag_spec\"
++
++ $ECHO " - use the \`$flag' linker flag"
++ fi
++ if test -n "$admincmds"; then
++ $ECHO " - have your system administrator run these commands:$admincmds"
++ fi
++ if test -f /etc/ld.so.conf; then
++ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++ fi
++ echo
++
++ echo "See any operating system documentation about shared libraries for"
++ case $host in
++ solaris2.[6789]|solaris2.1[0-9])
++ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
++ echo "pages."
++ ;;
++ *)
++ echo "more information, such as the ld(1) and ld.so(8) manual pages."
++ ;;
++ esac
++ echo "----------------------------------------------------------------------"
++ fi
++ exit $EXIT_SUCCESS
++}
++
++test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
++
++
++# func_mode_install arg...
++func_mode_install ()
++{
++ $opt_debug
++ # There may be an optional sh(1) argument at the beginning of
++ # install_prog (especially on Windows NT).
++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
++ # Allow the use of GNU shtool's install command.
++ case $nonopt in *shtool*) :;; *) false;; esac; then
++ # Aesthetically quote it.
++ func_quote_for_eval "$nonopt"
++ install_prog="$func_quote_for_eval_result "
++ arg=$1
++ shift
++ else
++ install_prog=
++ arg=$nonopt
++ fi
++
++ # The real first argument should be the name of the installation program.
++ # Aesthetically quote it.
++ func_quote_for_eval "$arg"
++ func_append install_prog "$func_quote_for_eval_result"
++ install_shared_prog=$install_prog
++ case " $install_prog " in
++ *[\\\ /]cp\ *) install_cp=: ;;
++ *) install_cp=false ;;
++ esac
++
++ # We need to accept at least all the BSD install flags.
++ dest=
++ files=
++ opts=
++ prev=
++ install_type=
++ isdir=no
++ stripme=
++ no_mode=:
++ for arg
++ do
++ arg2=
++ if test -n "$dest"; then
++ func_append files " $dest"
++ dest=$arg
++ continue
++ fi
++
++ case $arg in
++ -d) isdir=yes ;;
++ -f)
++ if $install_cp; then :; else
++ prev=$arg
++ fi
++ ;;
++ -g | -m | -o)
++ prev=$arg
++ ;;
++ -s)
++ stripme=" -s"
++ continue
++ ;;
++ -*)
++ ;;
++ *)
++ # If the previous option needed an argument, then skip it.
++ if test -n "$prev"; then
++ if test "x$prev" = x-m && test -n "$install_override_mode"; then
++ arg2=$install_override_mode
++ no_mode=false
++ fi
++ prev=
++ else
++ dest=$arg
++ continue
++ fi
++ ;;
++ esac
++
++ # Aesthetically quote the argument.
++ func_quote_for_eval "$arg"
++ func_append install_prog " $func_quote_for_eval_result"
++ if test -n "$arg2"; then
++ func_quote_for_eval "$arg2"
++ fi
++ func_append install_shared_prog " $func_quote_for_eval_result"
++ done
++
++ test -z "$install_prog" && \
++ func_fatal_help "you must specify an install program"
++
++ test -n "$prev" && \
++ func_fatal_help "the \`$prev' option requires an argument"
++
++ if test -n "$install_override_mode" && $no_mode; then
++ if $install_cp; then :; else
++ func_quote_for_eval "$install_override_mode"
++ func_append install_shared_prog " -m $func_quote_for_eval_result"
++ fi
++ fi
++
++ if test -z "$files"; then
++ if test -z "$dest"; then
++ func_fatal_help "no file or destination specified"
++ else
++ func_fatal_help "you must specify a destination"
++ fi
++ fi
++
++ # Strip any trailing slash from the destination.
++ func_stripname '' '/' "$dest"
++ dest=$func_stripname_result
++
++ # Check to see that the destination is a directory.
++ test -d "$dest" && isdir=yes
++ if test "$isdir" = yes; then
++ destdir="$dest"
++ destname=
++ else
++ func_dirname_and_basename "$dest" "" "."
++ destdir="$func_dirname_result"
++ destname="$func_basename_result"
++
++ # Not a directory, so check to see that there is only one file specified.
++ set dummy $files; shift
++ test "$#" -gt 1 && \
++ func_fatal_help "\`$dest' is not a directory"
++ fi
++ case $destdir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ for file in $files; do
++ case $file in
++ *.lo) ;;
++ *)
++ func_fatal_help "\`$destdir' must be an absolute directory name"
++ ;;
++ esac
++ done
++ ;;
++ esac
++
++ # This variable tells wrapper scripts just to set variables rather
++ # than running their programs.
++ libtool_install_magic="$magic"
++
++ staticlibs=
++ future_libdirs=
++ current_libdirs=
++ for file in $files; do
++
++ # Do each installation.
++ case $file in
++ *.$libext)
++ # Do the static libraries later.
++ func_append staticlibs " $file"
++ ;;
++
++ *.la)
++ func_resolve_sysroot "$file"
++ file=$func_resolve_sysroot_result
++
++ # Check to see that this really is a libtool archive.
++ func_lalib_unsafe_p "$file" \
++ || func_fatal_help "\`$file' is not a valid libtool archive"
++
++ library_names=
++ old_library=
++ relink_command=
++ func_source "$file"
++
++ # Add the libdir to current_libdirs if it is the destination.
++ if test "X$destdir" = "X$libdir"; then
++ case "$current_libdirs " in
++ *" $libdir "*) ;;
++ *) func_append current_libdirs " $libdir" ;;
++ esac
++ else
++ # Note the libdir as a future libdir.
++ case "$future_libdirs " in
++ *" $libdir "*) ;;
++ *) func_append future_libdirs " $libdir" ;;
++ esac
++ fi
++
++ func_dirname "$file" "/" ""
++ dir="$func_dirname_result"
++ func_append dir "$objdir"
++
++ if test -n "$relink_command"; then
++ # Determine the prefix the user has applied to our future dir.
++ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++
++ # Don't allow the user to place us outside of our expected
++ # location b/c this prevents finding dependent libraries that
++ # are installed to the same prefix.
++ # At present, this check doesn't affect windows .dll's that
++ # are installed into $libdir/../bin (currently, that works fine)
++ # but it's something to keep an eye on.
++ test "$inst_prefix_dir" = "$destdir" && \
++ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
++
++ if test -n "$inst_prefix_dir"; then
++ # Stick the inst_prefix_dir data into the link command.
++ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++ else
++ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
++ fi
++
++ func_warning "relinking \`$file'"
++ func_show_eval "$relink_command" \
++ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
++ fi
++
++ # See the names of the shared library.
++ set dummy $library_names; shift
++ if test -n "$1"; then
++ realname="$1"
++ shift
++
++ srcname="$realname"
++ test -n "$relink_command" && srcname="$realname"T
++
++ # Install the shared library and build the symlinks.
++ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
++ 'exit $?'
++ tstripme="$stripme"
++ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ case $realname in
++ *.dll.a)
++ tstripme=""
++ ;;
++ esac
++ ;;
++ esac
++ if test -n "$tstripme" && test -n "$striplib"; then
++ func_show_eval "$striplib $destdir/$realname" 'exit $?'
++ fi
++
++ if test "$#" -gt 0; then
++ # Delete the old symlinks, and create new ones.
++ # Try `ln -sf' first, because the `ln' binary might depend on
++ # the symlink we replace! Solaris /bin/ln does not understand -f,
++ # so we also need to try rm && ln -s.
++ for linkname
++ do
++ test "$linkname" != "$realname" \
++ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
++ done
++ fi
++
++ # Do each command in the postinstall commands.
++ lib="$destdir/$realname"
++ func_execute_cmds "$postinstall_cmds" 'exit $?'
++ fi
++
++ # Install the pseudo-library for information purposes.
++ func_basename "$file"
++ name="$func_basename_result"
++ instname="$dir/$name"i
++ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
++
++ # Maybe install the static library, too.
++ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
++ ;;
++
++ *.lo)
++ # Install (i.e. copy) a libtool object.
++
++ # Figure out destination file name, if it wasn't already specified.
++ if test -n "$destname"; then
++ destfile="$destdir/$destname"
++ else
++ func_basename "$file"
++ destfile="$func_basename_result"
++ destfile="$destdir/$destfile"
++ fi
++
++ # Deduce the name of the destination old-style object file.
++ case $destfile in
++ *.lo)
++ func_lo2o "$destfile"
++ staticdest=$func_lo2o_result
++ ;;
++ *.$objext)
++ staticdest="$destfile"
++ destfile=
++ ;;
++ *)
++ func_fatal_help "cannot copy a libtool object to \`$destfile'"
++ ;;
++ esac
++
++ # Install the libtool object if requested.
++ test -n "$destfile" && \
++ func_show_eval "$install_prog $file $destfile" 'exit $?'
++
++ # Install the old object if enabled.
++ if test "$build_old_libs" = yes; then
++ # Deduce the name of the old-style object file.
++ func_lo2o "$file"
++ staticobj=$func_lo2o_result
++ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
++ fi
++ exit $EXIT_SUCCESS
++ ;;
++
++ *)
++ # Figure out destination file name, if it wasn't already specified.
++ if test -n "$destname"; then
++ destfile="$destdir/$destname"
++ else
++ func_basename "$file"
++ destfile="$func_basename_result"
++ destfile="$destdir/$destfile"
++ fi
++
++ # If the file is missing, and there is a .exe on the end, strip it
++ # because it is most likely a libtool script we actually want to
++ # install
++ stripped_ext=""
++ case $file in
++ *.exe)
++ if test ! -f "$file"; then
++ func_stripname '' '.exe' "$file"
++ file=$func_stripname_result
++ stripped_ext=".exe"
++ fi
++ ;;
++ esac
++
++ # Do a test to see if this is really a libtool program.
++ case $host in
++ *cygwin* | *mingw*)
++ if func_ltwrapper_executable_p "$file"; then
++ func_ltwrapper_scriptname "$file"
++ wrapper=$func_ltwrapper_scriptname_result
++ else
++ func_stripname '' '.exe' "$file"
++ wrapper=$func_stripname_result
++ fi
++ ;;
++ *)
++ wrapper=$file
++ ;;
++ esac
++ if func_ltwrapper_script_p "$wrapper"; then
++ notinst_deplibs=
++ relink_command=
++
++ func_source "$wrapper"
++
++ # Check the variables that should have been set.
++ test -z "$generated_by_libtool_version" && \
++ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
++
++ finalize=yes
++ for lib in $notinst_deplibs; do
++ # Check to see that each library is installed.
++ libdir=
++ if test -f "$lib"; then
++ func_source "$lib"
++ fi
++ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
++ if test -n "$libdir" && test ! -f "$libfile"; then
++ func_warning "\`$lib' has not been installed in \`$libdir'"
++ finalize=no
++ fi
++ done
++
++ relink_command=
++ func_source "$wrapper"
++
++ outputname=
++ if test "$fast_install" = no && test -n "$relink_command"; then
++ $opt_dry_run || {
++ if test "$finalize" = yes; then
++ tmpdir=`func_mktempdir`
++ func_basename "$file$stripped_ext"
++ file="$func_basename_result"
++ outputname="$tmpdir/$file"
++ # Replace the output file specification.
++ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
++
++ $opt_silent || {
++ func_quote_for_expand "$relink_command"
++ eval "func_echo $func_quote_for_expand_result"
++ }
++ if eval "$relink_command"; then :
++ else
++ func_error "error: relink \`$file' with the above command before installing it"
++ $opt_dry_run || ${RM}r "$tmpdir"
++ continue
++ fi
++ file="$outputname"
++ else
++ func_warning "cannot relink \`$file'"
++ fi
++ }
++ else
++ # Install the binary that we compiled earlier.
++ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
++ fi
++ fi
++
++ # remove .exe since cygwin /usr/bin/install will append another
++ # one anyway
++ case $install_prog,$host in
++ */usr/bin/install*,*cygwin*)
++ case $file:$destfile in
++ *.exe:*.exe)
++ # this is ok
++ ;;
++ *.exe:*)
++ destfile=$destfile.exe
++ ;;
++ *:*.exe)
++ func_stripname '' '.exe' "$destfile"
++ destfile=$func_stripname_result
++ ;;
++ esac
++ ;;
++ esac
++ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
++ $opt_dry_run || if test -n "$outputname"; then
++ ${RM}r "$tmpdir"
++ fi
++ ;;
++ esac
++ done
++
++ for file in $staticlibs; do
++ func_basename "$file"
++ name="$func_basename_result"
++
++ # Set up the ranlib parameters.
++ oldlib="$destdir/$name"
++ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
++ tool_oldlib=$func_to_tool_file_result
++
++ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
++
++ if test -n "$stripme" && test -n "$old_striplib"; then
++ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
++ fi
++
++ # Do each command in the postinstall commands.
++ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
++ done
++
++ test -n "$future_libdirs" && \
++ func_warning "remember to run \`$progname --finish$future_libdirs'"
++
++ if test -n "$current_libdirs"; then
++ # Maybe just do a dry run.
++ $opt_dry_run && current_libdirs=" -n$current_libdirs"
++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
++ else
++ exit $EXIT_SUCCESS
++ fi
++}
++
++test "$opt_mode" = install && func_mode_install ${1+"$@"}
++
++
++# func_generate_dlsyms outputname originator pic_p
++# Extract symbols from dlprefiles and create ${outputname}S.o with
++# a dlpreopen symbol table.
++func_generate_dlsyms ()
++{
++ $opt_debug
++ my_outputname="$1"
++ my_originator="$2"
++ my_pic_p="${3-no}"
++ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
++ my_dlsyms=
++
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ if test -n "$NM" && test -n "$global_symbol_pipe"; then
++ my_dlsyms="${my_outputname}S.c"
++ else
++ func_error "not configured to extract global symbols from dlpreopened files"
++ fi
++ fi
++
++ if test -n "$my_dlsyms"; then
++ case $my_dlsyms in
++ "") ;;
++ *.c)
++ # Discover the nlist of each of the dlfiles.
++ nlist="$output_objdir/${my_outputname}.nm"
++
++ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
++
++ # Parse the name list into a source file.
++ func_verbose "creating $output_objdir/$my_dlsyms"
++
++ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
++
++#ifdef __cplusplus
++extern \"C\" {
++#endif
++
++#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
++#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
++#endif
++
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT_DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT_DLSYM_CONST
++#else
++# define LT_DLSYM_CONST const
++#endif
++
++/* External symbol declarations for the compiler. */\
++"
++
++ if test "$dlself" = yes; then
++ func_verbose "generating symbol list for \`$output'"
++
++ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
++
++ # Add our own program objects to the symbol list.
++ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
++ for progfile in $progfiles; do
++ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
++ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
++ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
++ done
++
++ if test -n "$exclude_expsyms"; then
++ $opt_dry_run || {
++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++ eval '$MV "$nlist"T "$nlist"'
++ }
++ fi
++
++ if test -n "$export_symbols_regex"; then
++ $opt_dry_run || {
++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++ eval '$MV "$nlist"T "$nlist"'
++ }
++ fi
++
++ # Prepare the list of exported symbols
++ if test -z "$export_symbols"; then
++ export_symbols="$output_objdir/$outputname.exp"
++ $opt_dry_run || {
++ $RM $export_symbols
++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ case $host in
++ *cygwin* | *mingw* | *cegcc* )
++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
++ ;;
++ esac
++ }
++ else
++ $opt_dry_run || {
++ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
++ eval '$MV "$nlist"T "$nlist"'
++ case $host in
++ *cygwin* | *mingw* | *cegcc* )
++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
++ ;;
++ esac
++ }
++ fi
++ fi
++
++ for dlprefile in $dlprefiles; do
++ func_verbose "extracting global C symbols from \`$dlprefile'"
++ func_basename "$dlprefile"
++ name="$func_basename_result"
++ case $host in
++ *cygwin* | *mingw* | *cegcc* )
++ # if an import library, we need to obtain dlname
++ if func_win32_import_lib_p "$dlprefile"; then
++ func_tr_sh "$dlprefile"
++ eval "curr_lafile=\$libfile_$func_tr_sh_result"
++ dlprefile_dlbasename=""
++ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
++ # Use subshell, to avoid clobbering current variable values
++ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
++ if test -n "$dlprefile_dlname" ; then
++ func_basename "$dlprefile_dlname"
++ dlprefile_dlbasename="$func_basename_result"
++ else
++ # no lafile. user explicitly requested -dlpreopen <import library>.
++ $sharedlib_from_linklib_cmd "$dlprefile"
++ dlprefile_dlbasename=$sharedlib_from_linklib_result
++ fi
++ fi
++ $opt_dry_run || {
++ if test -n "$dlprefile_dlbasename" ; then
++ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
++ else
++ func_warning "Could not compute DLL name from $name"
++ eval '$ECHO ": $name " >> "$nlist"'
++ fi
++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
++ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
++ }
++ else # not an import lib
++ $opt_dry_run || {
++ eval '$ECHO ": $name " >> "$nlist"'
++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++ }
++ fi
++ ;;
++ *)
++ $opt_dry_run || {
++ eval '$ECHO ": $name " >> "$nlist"'
++ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
++ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
++ }
++ ;;
++ esac
++ done
++
++ $opt_dry_run || {
++ # Make sure we have at least an empty file.
++ test -f "$nlist" || : > "$nlist"
++
++ if test -n "$exclude_expsyms"; then
++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++ $MV "$nlist"T "$nlist"
++ fi
++
++ # Try sorting and uniquifying the output.
++ if $GREP -v "^: " < "$nlist" |
++ if sort -k 3 </dev/null >/dev/null 2>&1; then
++ sort -k 3
++ else
++ sort +2
++ fi |
++ uniq > "$nlist"S; then
++ :
++ else
++ $GREP -v "^: " < "$nlist" > "$nlist"S
++ fi
++
++ if test -f "$nlist"S; then
++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
++ else
++ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
++ fi
++
++ echo >> "$output_objdir/$my_dlsyms" "\
++
++/* The mapping between symbol names and symbols. */
++typedef struct {
++ const char *name;
++ void *address;
++} lt_dlsymlist;
++extern LT_DLSYM_CONST lt_dlsymlist
++lt_${my_prefix}_LTX_preloaded_symbols[];
++LT_DLSYM_CONST lt_dlsymlist
++lt_${my_prefix}_LTX_preloaded_symbols[] =
++{\
++ { \"$my_originator\", (void *) 0 },"
++
++ case $need_lib_prefix in
++ no)
++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
++ ;;
++ *)
++ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
++ ;;
++ esac
++ echo >> "$output_objdir/$my_dlsyms" "\
++ {0, (void *) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++ return lt_${my_prefix}_LTX_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif\
++"
++ } # !$opt_dry_run
++
++ pic_flag_for_symtable=
++ case "$compile_command " in
++ *" -static "*) ;;
++ *)
++ case $host in
++ # compiling the symbol table file with pic_flag works around
++ # a FreeBSD bug that causes programs to crash when -lm is
++ # linked before any other PIC object. But we must not use
++ # pic_flag when linking with -static. The problem exists in
++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
++ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
++ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
++ *-*-hpux*)
++ pic_flag_for_symtable=" $pic_flag" ;;
++ *)
++ if test "X$my_pic_p" != Xno; then
++ pic_flag_for_symtable=" $pic_flag"
++ fi
++ ;;
++ esac
++ ;;
++ esac
++ symtab_cflags=
++ for arg in $LTCFLAGS; do
++ case $arg in
++ -pie | -fpie | -fPIE) ;;
++ *) func_append symtab_cflags " $arg" ;;
++ esac
++ done
++
++ # Now compile the dynamic symbol file.
++ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
++
++ # Clean up the generated files.
++ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
++
++ # Transform the symbol file into the correct name.
++ symfileobj="$output_objdir/${my_outputname}S.$objext"
++ case $host in
++ *cygwin* | *mingw* | *cegcc* )
++ if test -f "$output_objdir/$my_outputname.def"; then
++ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
++ else
++ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++ fi
++ ;;
++ *)
++ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
++ ;;
++ esac
++ ;;
++ *)
++ func_fatal_error "unknown suffix for \`$my_dlsyms'"
++ ;;
++ esac
++ else
++ # We keep going just in case the user didn't refer to
++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
++ # really was required.
++
++ # Nullify the symbol file.
++ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
++ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
++ fi
++}
++
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
++# Need a lot of goo to handle *both* DLLs and import libs
++# Has to be a shell function in order to 'eat' the argument
++# that is supplied when $file_magic_command is called.
++# Despite the name, also deal with 64 bit binaries.
++func_win32_libid ()
++{
++ $opt_debug
++ win32_libid_type="unknown"
++ win32_fileres=`file -L $1 2>/dev/null`
++ case $win32_fileres in
++ *ar\ archive\ import\ library*) # definitely import
++ win32_libid_type="x86 archive import"
++ ;;
++ *ar\ archive*) # could be an import, or static
++ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
++ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
++ func_to_tool_file "$1" func_convert_file_msys_to_w32
++ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
++ $SED -n -e '
++ 1,100{
++ / I /{
++ s,.*,import,
++ p
++ q
++ }
++ }'`
++ case $win32_nmres in
++ import*) win32_libid_type="x86 archive import";;
++ *) win32_libid_type="x86 archive static";;
++ esac
++ fi
++ ;;
++ *DLL*)
++ win32_libid_type="x86 DLL"
++ ;;
++ *executable*) # but shell scripts are "executable" too...
++ case $win32_fileres in
++ *MS\ Windows\ PE\ Intel*)
++ win32_libid_type="x86 DLL"
++ ;;
++ esac
++ ;;
++ esac
++ $ECHO "$win32_libid_type"
++}
++
++# func_cygming_dll_for_implib ARG
++#
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++# Invoked by eval'ing the libtool variable
++# $sharedlib_from_linklib_cmd
++# Result is available in the variable
++# $sharedlib_from_linklib_result
++func_cygming_dll_for_implib ()
++{
++ $opt_debug
++ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
++}
++
++# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
++#
++# The is the core of a fallback implementation of a
++# platform-specific function to extract the name of the
++# DLL associated with the specified import library LIBNAME.
++#
++# SECTION_NAME is either .idata$6 or .idata$7, depending
++# on the platform and compiler that created the implib.
++#
++# Echos the name of the DLL associated with the
++# specified import library.
++func_cygming_dll_for_implib_fallback_core ()
++{
++ $opt_debug
++ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
++ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
++ $SED '/^Contents of section '"$match_literal"':/{
++ # Place marker at beginning of archive member dllname section
++ s/.*/====MARK====/
++ p
++ d
++ }
++ # These lines can sometimes be longer than 43 characters, but
++ # are always uninteresting
++ /:[ ]*file format pe[i]\{,1\}-/d
++ /^In archive [^:]*:/d
++ # Ensure marker is printed
++ /^====MARK====/p
++ # Remove all lines with less than 43 characters
++ /^.\{43\}/!d
++ # From remaining lines, remove first 43 characters
++ s/^.\{43\}//' |
++ $SED -n '
++ # Join marker and all lines until next marker into a single line
++ /^====MARK====/ b para
++ H
++ $ b para
++ b
++ :para
++ x
++ s/\n//g
++ # Remove the marker
++ s/^====MARK====//
++ # Remove trailing dots and whitespace
++ s/[\. \t]*$//
++ # Print
++ /./p' |
++ # we now have a list, one entry per line, of the stringified
++ # contents of the appropriate section of all members of the
++ # archive which possess that section. Heuristic: eliminate
++ # all those which have a first or second character that is
++ # a '.' (that is, objdump's representation of an unprintable
++ # character.) This should work for all archives with less than
++ # 0x302f exports -- but will fail for DLLs whose name actually
++ # begins with a literal '.' or a single character followed by
++ # a '.'.
++ #
++ # Of those that remain, print the first one.
++ $SED -e '/^\./d;/^.\./d;q'
++}
++
++# func_cygming_gnu_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is a GNU/binutils-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_gnu_implib_p ()
++{
++ $opt_debug
++ func_to_tool_file "$1" func_convert_file_msys_to_w32
++ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
++ test -n "$func_cygming_gnu_implib_tmp"
++}
++
++# func_cygming_ms_implib_p ARG
++# This predicate returns with zero status (TRUE) if
++# ARG is an MS-style import library. Returns
++# with nonzero status (FALSE) otherwise.
++func_cygming_ms_implib_p ()
++{
++ $opt_debug
++ func_to_tool_file "$1" func_convert_file_msys_to_w32
++ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
++ test -n "$func_cygming_ms_implib_tmp"
++}
++
++# func_cygming_dll_for_implib_fallback ARG
++# Platform-specific function to extract the
++# name of the DLL associated with the specified
++# import library ARG.
++#
++# This fallback implementation is for use when $DLLTOOL
++# does not support the --identify-strict option.
++# Invoked by eval'ing the libtool variable
++# $sharedlib_from_linklib_cmd
++# Result is available in the variable
++# $sharedlib_from_linklib_result
++func_cygming_dll_for_implib_fallback ()
++{
++ $opt_debug
++ if func_cygming_gnu_implib_p "$1" ; then
++ # binutils import library
++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
++ elif func_cygming_ms_implib_p "$1" ; then
++ # ms-generated import library
++ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
++ else
++ # unknown
++ sharedlib_from_linklib_result=""
++ fi
++}
++
++
++# func_extract_an_archive dir oldlib
++func_extract_an_archive ()
++{
++ $opt_debug
++ f_ex_an_ar_dir="$1"; shift
++ f_ex_an_ar_oldlib="$1"
++ if test "$lock_old_archive_extraction" = yes; then
++ lockfile=$f_ex_an_ar_oldlib.lock
++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
++ func_echo "Waiting for $lockfile to be removed"
++ sleep 2
++ done
++ fi
++ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
++ 'stat=$?; rm -f "$lockfile"; exit $stat'
++ if test "$lock_old_archive_extraction" = yes; then
++ $opt_dry_run || rm -f "$lockfile"
++ fi
++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
++ :
++ else
++ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
++ fi
++}
++
++
++# func_extract_archives gentop oldlib ...
++func_extract_archives ()
++{
++ $opt_debug
++ my_gentop="$1"; shift
++ my_oldlibs=${1+"$@"}
++ my_oldobjs=""
++ my_xlib=""
++ my_xabs=""
++ my_xdir=""
++
++ for my_xlib in $my_oldlibs; do
++ # Extract the objects.
++ case $my_xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
++ *) my_xabs=`pwd`"/$my_xlib" ;;
++ esac
++ func_basename "$my_xlib"
++ my_xlib="$func_basename_result"
++ my_xlib_u=$my_xlib
++ while :; do
++ case " $extracted_archives " in
++ *" $my_xlib_u "*)
++ func_arith $extracted_serial + 1
++ extracted_serial=$func_arith_result
++ my_xlib_u=lt$extracted_serial-$my_xlib ;;
++ *) break ;;
++ esac
++ done
++ extracted_archives="$extracted_archives $my_xlib_u"
++ my_xdir="$my_gentop/$my_xlib_u"
++
++ func_mkdir_p "$my_xdir"
++
++ case $host in
++ *-darwin*)
++ func_verbose "Extracting $my_xabs"
++ # Do not bother doing anything if just a dry run
++ $opt_dry_run || {
++ darwin_orig_dir=`pwd`
++ cd $my_xdir || exit $?
++ darwin_archive=$my_xabs
++ darwin_curdir=`pwd`
++ darwin_base_archive=`basename "$darwin_archive"`
++ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
++ if test -n "$darwin_arches"; then
++ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
++ darwin_arch=
++ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
++ for darwin_arch in $darwin_arches ; do
++ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
++ cd "$darwin_curdir"
++ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
++ done # $darwin_arches
++ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
++ darwin_file=
++ darwin_files=
++ for darwin_file in $darwin_filelist; do
++ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
++ $LIPO -create -output "$darwin_file" $darwin_files
++ done # $darwin_filelist
++ $RM -rf unfat-$$
++ cd "$darwin_orig_dir"
++ else
++ cd $darwin_orig_dir
++ func_extract_an_archive "$my_xdir" "$my_xabs"
++ fi # $darwin_arches
++ } # !$opt_dry_run
++ ;;
++ *)
++ func_extract_an_archive "$my_xdir" "$my_xabs"
++ ;;
++ esac
++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
++ done
++
++ func_extract_archives_result="$my_oldobjs"
++}
++
++
++# func_emit_wrapper [arg=no]
++#
++# Emit a libtool wrapper script on stdout.
++# Don't directly open a file because we may want to
++# incorporate the script contents within a cygwin/mingw
++# wrapper executable. Must ONLY be called from within
++# func_mode_link because it depends on a number of variables
++# set therein.
++#
++# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
++# variable will take. If 'yes', then the emitted script
++# will assume that the directory in which it is stored is
++# the $objdir directory. This is a cygwin/mingw-specific
++# behavior.
++func_emit_wrapper ()
++{
++ func_emit_wrapper_arg1=${1-no}
++
++ $ECHO "\
++#! $SHELL
++
++# $output - temporary wrapper script for $objdir/$outputname
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# The $output program cannot be directly executed until all the libtool
++# libraries that it depends on are installed.
++#
++# This wrapper script should never be moved out of the build directory.
++# If it is, it will not operate correctly.
++
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++sed_quote_subst='$sed_quote_subst'
++
++# Be Bourne compatible
++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '\${1+\"\$@\"}'='\"\$@\"'
++ setopt NO_GLOB_SUBST
++else
++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
++fi
++BIN_SH=xpg4; export BIN_SH # for Tru64
++DUALCASE=1; export DUALCASE # for MKS sh
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++relink_command=\"$relink_command\"
++
++# This environment variable determines our operation mode.
++if test \"\$libtool_install_magic\" = \"$magic\"; then
++ # install mode needs the following variables:
++ generated_by_libtool_version='$macro_version'
++ notinst_deplibs='$notinst_deplibs'
++else
++ # When we are sourced in execute mode, \$file and \$ECHO are already set.
++ if test \"\$libtool_execute_magic\" != \"$magic\"; then
++ file=\"\$0\""
++
++ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
++ $ECHO "\
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++\$1
++_LTECHO_EOF'
++}
++ ECHO=\"$qECHO\"
++ fi
++
++# Very basic option parsing. These options are (a) specific to
++# the libtool wrapper, (b) are identical between the wrapper
++# /script/ and the wrapper /executable/ which is used only on
++# windows platforms, and (c) all begin with the string "--lt-"
++# (application programs are unlikely to have options which match
++# this pattern).
++#
++# There are only two supported options: --lt-debug and
++# --lt-dump-script. There is, deliberately, no --lt-help.
++#
++# The first argument to this parsing function should be the
++# script's $0 value, followed by "$@".
++lt_option_debug=
++func_parse_lt_options ()
++{
++ lt_script_arg0=\$0
++ shift
++ for lt_opt
++ do
++ case \"\$lt_opt\" in
++ --lt-debug) lt_option_debug=1 ;;
++ --lt-dump-script)
++ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
++ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
++ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
++ cat \"\$lt_dump_D/\$lt_dump_F\"
++ exit 0
++ ;;
++ --lt-*)
++ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
++ exit 1
++ ;;
++ esac
++ done
++
++ # Print the debug banner immediately:
++ if test -n \"\$lt_option_debug\"; then
++ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
++ fi
++}
++
++# Used when --lt-debug. Prints its arguments to stdout
++# (redirection is the responsibility of the caller)
++func_lt_dump_args ()
++{
++ lt_dump_args_N=1;
++ for lt_arg
++ do
++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
++ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
++ done
++}
++
++# Core function for launching the target application
++func_exec_program_core ()
++{
++"
++ case $host in
++ # Backslashes separate directories on plain windows
++ *-*-mingw | *-*-os2* | *-cegcc*)
++ $ECHO "\
++ if test -n \"\$lt_option_debug\"; then
++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
++ func_lt_dump_args \${1+\"\$@\"} 1>&2
++ fi
++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
++"
++ ;;
++
++ *)
++ $ECHO "\
++ if test -n \"\$lt_option_debug\"; then
++ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
++ func_lt_dump_args \${1+\"\$@\"} 1>&2
++ fi
++ exec \"\$progdir/\$program\" \${1+\"\$@\"}
++"
++ ;;
++ esac
++ $ECHO "\
++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
++ exit 1
++}
++
++# A function to encapsulate launching the target application
++# Strips options in the --lt-* namespace from \$@ and
++# launches target application with the remaining arguments.
++func_exec_program ()
++{
++ case \" \$* \" in
++ *\\ --lt-*)
++ for lt_wr_arg
++ do
++ case \$lt_wr_arg in
++ --lt-*) ;;
++ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
++ esac
++ shift
++ done ;;
++ esac
++ func_exec_program_core \${1+\"\$@\"}
++}
++
++ # Parse options
++ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
++
++ # Find the directory that this script lives in.
++ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
++ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
++
++ # Follow symbolic links until we get to the real thisdir.
++ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
++ while test -n \"\$file\"; do
++ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
++
++ # If there was a directory component, then change thisdir.
++ if test \"x\$destdir\" != \"x\$file\"; then
++ case \"\$destdir\" in
++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
++ *) thisdir=\"\$thisdir/\$destdir\" ;;
++ esac
++ fi
++
++ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
++ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
++ done
++
++ # Usually 'no', except on cygwin/mingw when embedded into
++ # the cwrapper.
++ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
++ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
++ # special case for '.'
++ if test \"\$thisdir\" = \".\"; then
++ thisdir=\`pwd\`
++ fi
++ # remove .libs from thisdir
++ case \"\$thisdir\" in
++ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
++ $objdir ) thisdir=. ;;
++ esac
++ fi
++
++ # Try to get the absolute directory name.
++ absdir=\`cd \"\$thisdir\" && pwd\`
++ test -n \"\$absdir\" && thisdir=\"\$absdir\"
++"
++
++ if test "$fast_install" = yes; then
++ $ECHO "\
++ program=lt-'$outputname'$exeext
++ progdir=\"\$thisdir/$objdir\"
++
++ if test ! -f \"\$progdir/\$program\" ||
++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
++
++ file=\"\$\$-\$program\"
++
++ if test ! -d \"\$progdir\"; then
++ $MKDIR \"\$progdir\"
++ else
++ $RM \"\$progdir/\$file\"
++ fi"
++
++ $ECHO "\
++
++ # relink executable if necessary
++ if test -n \"\$relink_command\"; then
++ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
++ else
++ $ECHO \"\$relink_command_output\" >&2
++ $RM \"\$progdir/\$file\"
++ exit 1
++ fi
++ fi
++
++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
++ { $RM \"\$progdir/\$program\";
++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
++ $RM \"\$progdir/\$file\"
++ fi"
++ else
++ $ECHO "\
++ program='$outputname'
++ progdir=\"\$thisdir/$objdir\"
++"
++ fi
++
++ $ECHO "\
++
++ if test -f \"\$progdir/\$program\"; then"
++
++ # fixup the dll searchpath if we need to.
++ #
++ # Fix the DLL searchpath if we need to. Do this before prepending
++ # to shlibpath, because on Windows, both are PATH and uninstalled
++ # libraries must come first.
++ if test -n "$dllsearchpath"; then
++ $ECHO "\
++ # Add the dll search path components to the executable PATH
++ PATH=$dllsearchpath:\$PATH
++"
++ fi
++
++ # Export our shlibpath_var if we have one.
++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++ $ECHO "\
++ # Add our own library path to $shlibpath_var
++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
++
++ # Some systems cannot cope with colon-terminated $shlibpath_var
++ # The second colon is a workaround for a bug in BeOS R4 sed
++ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
++
++ export $shlibpath_var
++"
++ fi
++
++ $ECHO "\
++ if test \"\$libtool_execute_magic\" != \"$magic\"; then
++ # Run the actual program with our arguments.
++ func_exec_program \${1+\"\$@\"}
++ fi
++ else
++ # The program doesn't exist.
++ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
++ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
++ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
++ exit 1
++ fi
++fi\
++"
++}
++
++
++# func_emit_cwrapperexe_src
++# emit the source code for a wrapper executable on stdout
++# Must ONLY be called from within func_mode_link because
++# it depends on a number of variable set therein.
++func_emit_cwrapperexe_src ()
++{
++ cat <<EOF
++
++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
++ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++
++ The $output program cannot be directly executed until all the libtool
++ libraries that it depends on are installed.
++
++ This wrapper executable should never be moved out of the build directory.
++ If it is, it will not operate correctly.
++*/
++EOF
++ cat <<"EOF"
++#ifdef _MSC_VER
++# define _CRT_SECURE_NO_DEPRECATE 1
++#endif
++#include <stdio.h>
++#include <stdlib.h>
++#ifdef _MSC_VER
++# include <direct.h>
++# include <process.h>
++# include <io.h>
++#else
++# include <unistd.h>
++# include <stdint.h>
++# ifdef __CYGWIN__
++# include <io.h>
++# endif
++#endif
++#include <malloc.h>
++#include <stdarg.h>
++#include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <errno.h>
++#include <fcntl.h>
++#include <sys/stat.h>
++
++/* declarations of non-ANSI functions */
++#if defined(__MINGW32__)
++# ifdef __STRICT_ANSI__
++int _putenv (const char *);
++# endif
++#elif defined(__CYGWIN__)
++# ifdef __STRICT_ANSI__
++char *realpath (const char *, char *);
++int putenv (char *);
++int setenv (const char *, const char *, int);
++# endif
++/* #elif defined (other platforms) ... */
++#endif
++
++/* portability defines, excluding path handling macros */
++#if defined(_MSC_VER)
++# define setmode _setmode
++# define stat _stat
++# define chmod _chmod
++# define getcwd _getcwd
++# define putenv _putenv
++# define S_IXUSR _S_IEXEC
++# ifndef _INTPTR_T_DEFINED
++# define _INTPTR_T_DEFINED
++# define intptr_t int
++# endif
++#elif defined(__MINGW32__)
++# define setmode _setmode
++# define stat _stat
++# define chmod _chmod
++# define getcwd _getcwd
++# define putenv _putenv
++#elif defined(__CYGWIN__)
++# define HAVE_SETENV
++# define FOPEN_WB "wb"
++/* #elif defined (other platforms) ... */
++#endif
++
++#if defined(PATH_MAX)
++# define LT_PATHMAX PATH_MAX
++#elif defined(MAXPATHLEN)
++# define LT_PATHMAX MAXPATHLEN
++#else
++# define LT_PATHMAX 1024
++#endif
++
++#ifndef S_IXOTH
++# define S_IXOTH 0
++#endif
++#ifndef S_IXGRP
++# define S_IXGRP 0
++#endif
++
++/* path handling portability macros */
++#ifndef DIR_SEPARATOR
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
++#endif
++
++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
++ defined (__OS2__)
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# define FOPEN_WB "wb"
++# ifndef DIR_SEPARATOR_2
++# define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++# define PATH_SEPARATOR_2 ';'
++# endif
++#endif
++
++#ifndef DIR_SEPARATOR_2
++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
++#else /* DIR_SEPARATOR_2 */
++# define IS_DIR_SEPARATOR(ch) \
++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
++#endif /* DIR_SEPARATOR_2 */
++
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
++
++#ifndef FOPEN_WB
++# define FOPEN_WB "w"
++#endif
++#ifndef _O_BINARY
++# define _O_BINARY 0
++#endif
++
++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
++#define XFREE(stale) do { \
++ if (stale) { free ((void *) stale); stale = 0; } \
++} while (0)
++
++#if defined(LT_DEBUGWRAPPER)
++static int lt_debug = 1;
++#else
++static int lt_debug = 0;
++#endif
++
++const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
++
++void *xmalloc (size_t num);
++char *xstrdup (const char *string);
++const char *base_name (const char *name);
++char *find_executable (const char *wrapper);
++char *chase_symlinks (const char *pathspec);
++int make_executable (const char *path);
++int check_executable (const char *path);
++char *strendzap (char *str, const char *pat);
++void lt_debugprintf (const char *file, int line, const char *fmt, ...);
++void lt_fatal (const char *file, int line, const char *message, ...);
++static const char *nonnull (const char *s);
++static const char *nonempty (const char *s);
++void lt_setenv (const char *name, const char *value);
++char *lt_extend_str (const char *orig_value, const char *add, int to_end);
++void lt_update_exe_path (const char *name, const char *value);
++void lt_update_lib_path (const char *name, const char *value);
++char **prepare_spawn (char **argv);
++void lt_dump_script (FILE *f);
++EOF
++
++ cat <<EOF
++volatile const char * MAGIC_EXE = "$magic_exe";
++const char * LIB_PATH_VARNAME = "$shlibpath_var";
++EOF
++
++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++ func_to_host_path "$temp_rpath"
++ cat <<EOF
++const char * LIB_PATH_VALUE = "$func_to_host_path_result";
++EOF
++ else
++ cat <<"EOF"
++const char * LIB_PATH_VALUE = "";
++EOF
++ fi
++
++ if test -n "$dllsearchpath"; then
++ func_to_host_path "$dllsearchpath:"
++ cat <<EOF
++const char * EXE_PATH_VARNAME = "PATH";
++const char * EXE_PATH_VALUE = "$func_to_host_path_result";
++EOF
++ else
++ cat <<"EOF"
++const char * EXE_PATH_VARNAME = "";
++const char * EXE_PATH_VALUE = "";
++EOF
++ fi
++
++ if test "$fast_install" = yes; then
++ cat <<EOF
++const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
++EOF
++ else
++ cat <<EOF
++const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
++EOF
++ fi
++
++
++ cat <<"EOF"
++
++#define LTWRAPPER_OPTION_PREFIX "--lt-"
++
++static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
++static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
++static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
++
++int
++main (int argc, char *argv[])
++{
++ char **newargz;
++ int newargc;
++ char *tmp_pathspec;
++ char *actual_cwrapper_path;
++ char *actual_cwrapper_name;
++ char *target_name;
++ char *lt_argv_zero;
++ intptr_t rval = 127;
++
++ int i;
++
++ program_name = (char *) xstrdup (base_name (argv[0]));
++ newargz = XMALLOC (char *, argc + 1);
++
++ /* very simple arg parsing; don't want to rely on getopt
++ * also, copy all non cwrapper options to newargz, except
++ * argz[0], which is handled differently
++ */
++ newargc=0;
++ for (i = 1; i < argc; i++)
++ {
++ if (strcmp (argv[i], dumpscript_opt) == 0)
++ {
++EOF
++ case "$host" in
++ *mingw* | *cygwin* )
++ # make stdout use "unix" line endings
++ echo " setmode(1,_O_BINARY);"
++ ;;
++ esac
++
++ cat <<"EOF"
++ lt_dump_script (stdout);
++ return 0;
++ }
++ if (strcmp (argv[i], debug_opt) == 0)
++ {
++ lt_debug = 1;
++ continue;
++ }
++ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
++ {
++ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
++ namespace, but it is not one of the ones we know about and
++ have already dealt with, above (inluding dump-script), then
++ report an error. Otherwise, targets might begin to believe
++ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
++ namespace. The first time any user complains about this, we'll
++ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
++ or a configure.ac-settable value.
++ */
++ lt_fatal (__FILE__, __LINE__,
++ "unrecognized %s option: '%s'",
++ ltwrapper_option_prefix, argv[i]);
++ }
++ /* otherwise ... */
++ newargz[++newargc] = xstrdup (argv[i]);
++ }
++ newargz[++newargc] = NULL;
++
++EOF
++ cat <<EOF
++ /* The GNU banner must be the first non-error debug message */
++ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
++EOF
++ cat <<"EOF"
++ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
++ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
++
++ tmp_pathspec = find_executable (argv[0]);
++ if (tmp_pathspec == NULL)
++ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) found exe (before symlink chase) at: %s\n",
++ tmp_pathspec);
++
++ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) found exe (after symlink chase) at: %s\n",
++ actual_cwrapper_path);
++ XFREE (tmp_pathspec);
++
++ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
++ strendzap (actual_cwrapper_path, actual_cwrapper_name);
++
++ /* wrapper name transforms */
++ strendzap (actual_cwrapper_name, ".exe");
++ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
++ XFREE (actual_cwrapper_name);
++ actual_cwrapper_name = tmp_pathspec;
++ tmp_pathspec = 0;
++
++ /* target_name transforms -- use actual target program name; might have lt- prefix */
++ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
++ strendzap (target_name, ".exe");
++ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
++ XFREE (target_name);
++ target_name = tmp_pathspec;
++ tmp_pathspec = 0;
++
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) libtool target name: %s\n",
++ target_name);
++EOF
++
++ cat <<EOF
++ newargz[0] =
++ XMALLOC (char, (strlen (actual_cwrapper_path) +
++ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
++ strcpy (newargz[0], actual_cwrapper_path);
++ strcat (newargz[0], "$objdir");
++ strcat (newargz[0], "/");
++EOF
++
++ cat <<"EOF"
++ /* stop here, and copy so we don't have to do this twice */
++ tmp_pathspec = xstrdup (newargz[0]);
++
++ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
++ strcat (newargz[0], actual_cwrapper_name);
++
++ /* DO want the lt- prefix here if it exists, so use target_name */
++ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
++ XFREE (tmp_pathspec);
++ tmp_pathspec = NULL;
++EOF
++
++ case $host_os in
++ mingw*)
++ cat <<"EOF"
++ {
++ char* p;
++ while ((p = strchr (newargz[0], '\\')) != NULL)
++ {
++ *p = '/';
++ }
++ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
++ {
++ *p = '/';
++ }
++ }
++EOF
++ ;;
++ esac
++
++ cat <<"EOF"
++ XFREE (target_name);
++ XFREE (actual_cwrapper_path);
++ XFREE (actual_cwrapper_name);
++
++ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
++ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
++ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
++ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
++ because on Windows, both *_VARNAMEs are PATH but uninstalled
++ libraries must come first. */
++ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
++ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
++
++ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
++ nonnull (lt_argv_zero));
++ for (i = 0; i < newargc; i++)
++ {
++ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
++ i, nonnull (newargz[i]));
++ }
++
++EOF
++
++ case $host_os in
++ mingw*)
++ cat <<"EOF"
++ /* execv doesn't actually work on mingw as expected on unix */
++ newargz = prepare_spawn (newargz);
++ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
++ if (rval == -1)
++ {
++ /* failed to start process */
++ lt_debugprintf (__FILE__, __LINE__,
++ "(main) failed to launch target \"%s\": %s\n",
++ lt_argv_zero, nonnull (strerror (errno)));
++ return 127;
++ }
++ return rval;
++EOF
++ ;;
++ *)
++ cat <<"EOF"
++ execv (lt_argv_zero, newargz);
++ return rval; /* =127, but avoids unused variable warning */
++EOF
++ ;;
++ esac
++
++ cat <<"EOF"
++}
++
++void *
++xmalloc (size_t num)
++{
++ void *p = (void *) malloc (num);
++ if (!p)
++ lt_fatal (__FILE__, __LINE__, "memory exhausted");
++
++ return p;
++}
++
++char *
++xstrdup (const char *string)
++{
++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
++ string) : NULL;
++}
++
++const char *
++base_name (const char *name)
++{
++ const char *base;
++
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ /* Skip over the disk name in MSDOS pathnames. */
++ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
++ name += 2;
++#endif
++
++ for (base = name; *name; name++)
++ if (IS_DIR_SEPARATOR (*name))
++ base = name + 1;
++ return base;
++}
++
++int
++check_executable (const char *path)
++{
++ struct stat st;
++
++ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
++ nonempty (path));
++ if ((!path) || (!*path))
++ return 0;
++
++ if ((stat (path, &st) >= 0)
++ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
++ return 1;
++ else
++ return 0;
++}
++
++int
++make_executable (const char *path)
++{
++ int rval = 0;
++ struct stat st;
++
++ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
++ nonempty (path));
++ if ((!path) || (!*path))
++ return 0;
++
++ if (stat (path, &st) >= 0)
++ {
++ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
++ }
++ return rval;
++}
++
++/* Searches for the full path of the wrapper. Returns
++ newly allocated full path name if found, NULL otherwise
++ Does not chase symlinks, even on platforms that support them.
++*/
++char *
++find_executable (const char *wrapper)
++{
++ int has_slash = 0;
++ const char *p;
++ const char *p_next;
++ /* static buffer for getcwd */
++ char tmp[LT_PATHMAX + 1];
++ int tmp_len;
++ char *concat_name;
++
++ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
++ nonempty (wrapper));
++
++ if ((wrapper == NULL) || (*wrapper == '\0'))
++ return NULL;
++
++ /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
++ {
++ concat_name = xstrdup (wrapper);
++ if (check_executable (concat_name))
++ return concat_name;
++ XFREE (concat_name);
++ }
++ else
++ {
++#endif
++ if (IS_DIR_SEPARATOR (wrapper[0]))
++ {
++ concat_name = xstrdup (wrapper);
++ if (check_executable (concat_name))
++ return concat_name;
++ XFREE (concat_name);
++ }
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++ }
++#endif
++
++ for (p = wrapper; *p; p++)
++ if (*p == '/')
++ {
++ has_slash = 1;
++ break;
++ }
++ if (!has_slash)
++ {
++ /* no slashes; search PATH */
++ const char *path = getenv ("PATH");
++ if (path != NULL)
++ {
++ for (p = path; *p; p = p_next)
++ {
++ const char *q;
++ size_t p_len;
++ for (q = p; *q; q++)
++ if (IS_PATH_SEPARATOR (*q))
++ break;
++ p_len = q - p;
++ p_next = (*q == '\0' ? q : q + 1);
++ if (p_len == 0)
++ {
++ /* empty path: current directory */
++ if (getcwd (tmp, LT_PATHMAX) == NULL)
++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++ nonnull (strerror (errno)));
++ tmp_len = strlen (tmp);
++ concat_name =
++ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
++ memcpy (concat_name, tmp, tmp_len);
++ concat_name[tmp_len] = '/';
++ strcpy (concat_name + tmp_len + 1, wrapper);
++ }
++ else
++ {
++ concat_name =
++ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
++ memcpy (concat_name, p, p_len);
++ concat_name[p_len] = '/';
++ strcpy (concat_name + p_len + 1, wrapper);
++ }
++ if (check_executable (concat_name))
++ return concat_name;
++ XFREE (concat_name);
++ }
++ }
++ /* not found in PATH; assume curdir */
++ }
++ /* Relative path | not found in path: prepend cwd */
++ if (getcwd (tmp, LT_PATHMAX) == NULL)
++ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
++ nonnull (strerror (errno)));
++ tmp_len = strlen (tmp);
++ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
++ memcpy (concat_name, tmp, tmp_len);
++ concat_name[tmp_len] = '/';
++ strcpy (concat_name + tmp_len + 1, wrapper);
++
++ if (check_executable (concat_name))
++ return concat_name;
++ XFREE (concat_name);
++ return NULL;
++}
++
++char *
++chase_symlinks (const char *pathspec)
++{
++#ifndef S_ISLNK
++ return xstrdup (pathspec);
++#else
++ char buf[LT_PATHMAX];
++ struct stat s;
++ char *tmp_pathspec = xstrdup (pathspec);
++ char *p;
++ int has_symlinks = 0;
++ while (strlen (tmp_pathspec) && !has_symlinks)
++ {
++ lt_debugprintf (__FILE__, __LINE__,
++ "checking path component for symlinks: %s\n",
++ tmp_pathspec);
++ if (lstat (tmp_pathspec, &s) == 0)
++ {
++ if (S_ISLNK (s.st_mode) != 0)
++ {
++ has_symlinks = 1;
++ break;
++ }
++
++ /* search backwards for last DIR_SEPARATOR */
++ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
++ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
++ p--;
++ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
++ {
++ /* no more DIR_SEPARATORS left */
++ break;
++ }
++ *p = '\0';
++ }
++ else
++ {
++ lt_fatal (__FILE__, __LINE__,
++ "error accessing file \"%s\": %s",
++ tmp_pathspec, nonnull (strerror (errno)));
++ }
++ }
++ XFREE (tmp_pathspec);
++
++ if (!has_symlinks)
++ {
++ return xstrdup (pathspec);
++ }
++
++ tmp_pathspec = realpath (pathspec, buf);
++ if (tmp_pathspec == 0)
++ {
++ lt_fatal (__FILE__, __LINE__,
++ "could not follow symlinks for %s", pathspec);
++ }
++ return xstrdup (tmp_pathspec);
++#endif
++}
++
++char *
++strendzap (char *str, const char *pat)
++{
++ size_t len, patlen;
++
++ assert (str != NULL);
++ assert (pat != NULL);
++
++ len = strlen (str);
++ patlen = strlen (pat);
++
++ if (patlen <= len)
++ {
++ str += len - patlen;
++ if (strcmp (str, pat) == 0)
++ *str = '\0';
++ }
++ return str;
++}
++
++void
++lt_debugprintf (const char *file, int line, const char *fmt, ...)
++{
++ va_list args;
++ if (lt_debug)
++ {
++ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
++ va_start (args, fmt);
++ (void) vfprintf (stderr, fmt, args);
++ va_end (args);
++ }
++}
++
++static void
++lt_error_core (int exit_status, const char *file,
++ int line, const char *mode,
++ const char *message, va_list ap)
++{
++ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
++ vfprintf (stderr, message, ap);
++ fprintf (stderr, ".\n");
++
++ if (exit_status >= 0)
++ exit (exit_status);
++}
++
++void
++lt_fatal (const char *file, int line, const char *message, ...)
++{
++ va_list ap;
++ va_start (ap, message);
++ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
++ va_end (ap);
++}
++
++static const char *
++nonnull (const char *s)
++{
++ return s ? s : "(null)";
++}
++
++static const char *
++nonempty (const char *s)
++{
++ return (s && !*s) ? "(empty)" : nonnull (s);
++}
++
++void
++lt_setenv (const char *name, const char *value)
++{
++ lt_debugprintf (__FILE__, __LINE__,
++ "(lt_setenv) setting '%s' to '%s'\n",
++ nonnull (name), nonnull (value));
++ {
++#ifdef HAVE_SETENV
++ /* always make a copy, for consistency with !HAVE_SETENV */
++ char *str = xstrdup (value);
++ setenv (name, str, 1);
++#else
++ int len = strlen (name) + 1 + strlen (value) + 1;
++ char *str = XMALLOC (char, len);
++ sprintf (str, "%s=%s", name, value);
++ if (putenv (str) != EXIT_SUCCESS)
++ {
++ XFREE (str);
++ }
++#endif
++ }
++}
++
++char *
++lt_extend_str (const char *orig_value, const char *add, int to_end)
++{
++ char *new_value;
++ if (orig_value && *orig_value)
++ {
++ int orig_value_len = strlen (orig_value);
++ int add_len = strlen (add);
++ new_value = XMALLOC (char, add_len + orig_value_len + 1);
++ if (to_end)
++ {
++ strcpy (new_value, orig_value);
++ strcpy (new_value + orig_value_len, add);
++ }
++ else
++ {
++ strcpy (new_value, add);
++ strcpy (new_value + add_len, orig_value);
++ }
++ }
++ else
++ {
++ new_value = xstrdup (add);
++ }
++ return new_value;
++}
++
++void
++lt_update_exe_path (const char *name, const char *value)
++{
++ lt_debugprintf (__FILE__, __LINE__,
++ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
++ nonnull (name), nonnull (value));
++
++ if (name && *name && value && *value)
++ {
++ char *new_value = lt_extend_str (getenv (name), value, 0);
++ /* some systems can't cope with a ':'-terminated path #' */
++ int len = strlen (new_value);
++ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
++ {
++ new_value[len-1] = '\0';
++ }
++ lt_setenv (name, new_value);
++ XFREE (new_value);
++ }
++}
++
++void
++lt_update_lib_path (const char *name, const char *value)
++{
++ lt_debugprintf (__FILE__, __LINE__,
++ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
++ nonnull (name), nonnull (value));
++
++ if (name && *name && value && *value)
++ {
++ char *new_value = lt_extend_str (getenv (name), value, 0);
++ lt_setenv (name, new_value);
++ XFREE (new_value);
++ }
++}
++
++EOF
++ case $host_os in
++ mingw*)
++ cat <<"EOF"
++
++/* Prepares an argument vector before calling spawn().
++ Note that spawn() does not by itself call the command interpreter
++ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
++ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
++ GetVersionEx(&v);
++ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
++ }) ? "cmd.exe" : "command.com").
++ Instead it simply concatenates the arguments, separated by ' ', and calls
++ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
++ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
++ special way:
++ - Space and tab are interpreted as delimiters. They are not treated as
++ delimiters if they are surrounded by double quotes: "...".
++ - Unescaped double quotes are removed from the input. Their only effect is
++ that within double quotes, space and tab are treated like normal
++ characters.
++ - Backslashes not followed by double quotes are not special.
++ - But 2*n+1 backslashes followed by a double quote become
++ n backslashes followed by a double quote (n >= 0):
++ \" -> "
++ \\\" -> \"
++ \\\\\" -> \\"
++ */
++#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
++char **
++prepare_spawn (char **argv)
++{
++ size_t argc;
++ char **new_argv;
++ size_t i;
++
++ /* Count number of arguments. */
++ for (argc = 0; argv[argc] != NULL; argc++)
++ ;
++
++ /* Allocate new argument vector. */
++ new_argv = XMALLOC (char *, argc + 1);
++
++ /* Put quoted arguments into the new argument vector. */
++ for (i = 0; i < argc; i++)
++ {
++ const char *string = argv[i];
++
++ if (string[0] == '\0')
++ new_argv[i] = xstrdup ("\"\"");
++ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
++ {
++ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
++ size_t length;
++ unsigned int backslashes;
++ const char *s;
++ char *quoted_string;
++ char *p;
++
++ length = 0;
++ backslashes = 0;
++ if (quote_around)
++ length++;
++ for (s = string; *s != '\0'; s++)
++ {
++ char c = *s;
++ if (c == '"')
++ length += backslashes + 1;
++ length++;
++ if (c == '\\')
++ backslashes++;
++ else
++ backslashes = 0;
++ }
++ if (quote_around)
++ length += backslashes + 1;
++
++ quoted_string = XMALLOC (char, length + 1);
++
++ p = quoted_string;
++ backslashes = 0;
++ if (quote_around)
++ *p++ = '"';
++ for (s = string; *s != '\0'; s++)
++ {
++ char c = *s;
++ if (c == '"')
++ {
++ unsigned int j;
++ for (j = backslashes + 1; j > 0; j--)
++ *p++ = '\\';
++ }
++ *p++ = c;
++ if (c == '\\')
++ backslashes++;
++ else
++ backslashes = 0;
++ }
++ if (quote_around)
++ {
++ unsigned int j;
++ for (j = backslashes; j > 0; j--)
++ *p++ = '\\';
++ *p++ = '"';
++ }
++ *p = '\0';
++
++ new_argv[i] = quoted_string;
++ }
++ else
++ new_argv[i] = (char *) string;
++ }
++ new_argv[argc] = NULL;
++
++ return new_argv;
++}
++EOF
++ ;;
++ esac
++
++ cat <<"EOF"
++void lt_dump_script (FILE* f)
++{
++EOF
++ func_emit_wrapper yes |
++ $SED -n -e '
++s/^\(.\{79\}\)\(..*\)/\1\
++\2/
++h
++s/\([\\"]\)/\\\1/g
++s/$/\\n/
++s/\([^\n]*\).*/ fputs ("\1", f);/p
++g
++D'
++ cat <<"EOF"
++}
++EOF
++}
++# end: func_emit_cwrapperexe_src
++
++# func_win32_import_lib_p ARG
++# True if ARG is an import lib, as indicated by $file_magic_cmd
++func_win32_import_lib_p ()
++{
++ $opt_debug
++ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
++ *import*) : ;;
++ *) false ;;
++ esac
++}
++
++# func_mode_link arg...
++func_mode_link ()
++{
++ $opt_debug
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++ # It is impossible to link a dll without this setting, and
++ # we shouldn't force the makefile maintainer to figure out
++ # which system we are compiling for in order to pass an extra
++ # flag for every libtool invocation.
++ # allow_undefined=no
++
++ # FIXME: Unfortunately, there are problems with the above when trying
++ # to make a dll which has undefined symbols, in which case not
++ # even a static library is built. For now, we need to specify
++ # -no-undefined on the libtool link line when we can be certain
++ # that all symbols are satisfied, otherwise we get a static library.
++ allow_undefined=yes
++ ;;
++ *)
++ allow_undefined=yes
++ ;;
++ esac
++ libtool_args=$nonopt
++ base_compile="$nonopt $@"
++ compile_command=$nonopt
++ finalize_command=$nonopt
++
++ compile_rpath=
++ finalize_rpath=
++ compile_shlibpath=
++ finalize_shlibpath=
++ convenience=
++ old_convenience=
++ deplibs=
++ old_deplibs=
++ compiler_flags=
++ linker_flags=
++ dllsearchpath=
++ lib_search_path=`pwd`
++ inst_prefix_dir=
++ new_inherited_linker_flags=
++
++ avoid_version=no
++ bindir=
++ dlfiles=
++ dlprefiles=
++ dlself=no
++ export_dynamic=no
++ export_symbols=
++ export_symbols_regex=
++ generated=
++ libobjs=
++ ltlibs=
++ module=no
++ no_install=no
++ objs=
++ non_pic_objects=
++ precious_files_regex=
++ prefer_static_libs=no
++ preload=no
++ prev=
++ prevarg=
++ release=
++ rpath=
++ xrpath=
++ perm_rpath=
++ temp_rpath=
++ thread_safe=no
++ vinfo=
++ vinfo_number=no
++ weak_libs=
++ single_module="${wl}-single_module"
++ func_infer_tag $base_compile
++
++ # We need to know -static, to get the right output filenames.
++ for arg
++ do
++ case $arg in
++ -shared)
++ test "$build_libtool_libs" != yes && \
++ func_fatal_configuration "can not build a shared library"
++ build_old_libs=no
++ break
++ ;;
++ -all-static | -static | -static-libtool-libs)
++ case $arg in
++ -all-static)
++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
++ func_warning "complete static linking is impossible in this configuration"
++ fi
++ if test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ prefer_static_libs=yes
++ ;;
++ -static)
++ if test -z "$pic_flag" && test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ prefer_static_libs=built
++ ;;
++ -static-libtool-libs)
++ if test -z "$pic_flag" && test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ prefer_static_libs=yes
++ ;;
++ esac
++ build_libtool_libs=no
++ build_old_libs=yes
++ break
++ ;;
++ esac
++ done
++
++ # See if our shared archives depend on static archives.
++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++
++ # Go through the arguments, transforming them on the way.
++ while test "$#" -gt 0; do
++ arg="$1"
++ shift
++ func_quote_for_eval "$arg"
++ qarg=$func_quote_for_eval_unquoted_result
++ func_append libtool_args " $func_quote_for_eval_result"
++
++ # If the previous option needs an argument, assign it.
++ if test -n "$prev"; then
++ case $prev in
++ output)
++ func_append compile_command " @OUTPUT@"
++ func_append finalize_command " @OUTPUT@"
++ ;;
++ esac
++
++ case $prev in
++ bindir)
++ bindir="$arg"
++ prev=
++ continue
++ ;;
++ dlfiles|dlprefiles)
++ if test "$preload" = no; then
++ # Add the symbol object into the linking commands.
++ func_append compile_command " @SYMFILE@"
++ func_append finalize_command " @SYMFILE@"
++ preload=yes
++ fi
++ case $arg in
++ *.la | *.lo) ;; # We handle these cases below.
++ force)
++ if test "$dlself" = no; then
++ dlself=needless
++ export_dynamic=yes
++ fi
++ prev=
++ continue
++ ;;
++ self)
++ if test "$prev" = dlprefiles; then
++ dlself=yes
++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
++ dlself=yes
++ else
++ dlself=needless
++ export_dynamic=yes
++ fi
++ prev=
++ continue
++ ;;
++ *)
++ if test "$prev" = dlfiles; then
++ func_append dlfiles " $arg"
++ else
++ func_append dlprefiles " $arg"
++ fi
++ prev=
++ continue
++ ;;
++ esac
++ ;;
++ expsyms)
++ export_symbols="$arg"
++ test -f "$arg" \
++ || func_fatal_error "symbol file \`$arg' does not exist"
++ prev=
++ continue
++ ;;
++ expsyms_regex)
++ export_symbols_regex="$arg"
++ prev=
++ continue
++ ;;
++ framework)
++ case $host in
++ *-*-darwin*)
++ case "$deplibs " in
++ *" $qarg.ltframework "*) ;;
++ *) func_append deplibs " $qarg.ltframework" # this is fixed later
++ ;;
++ esac
++ ;;
++ esac
++ prev=
++ continue
++ ;;
++ inst_prefix)
++ inst_prefix_dir="$arg"
++ prev=
++ continue
++ ;;
++ objectlist)
++ if test -f "$arg"; then
++ save_arg=$arg
++ moreargs=
++ for fil in `cat "$save_arg"`
++ do
++# func_append moreargs " $fil"
++ arg=$fil
++ # A libtool-controlled object.
++
++ # Check to see that this really is a libtool object.
++ if func_lalib_unsafe_p "$arg"; then
++ pic_object=
++ non_pic_object=
++
++ # Read the .lo file
++ func_source "$arg"
++
++ if test -z "$pic_object" ||
++ test -z "$non_pic_object" ||
++ test "$pic_object" = none &&
++ test "$non_pic_object" = none; then
++ func_fatal_error "cannot find name of object for \`$arg'"
++ fi
++
++ # Extract subdirectory from the argument.
++ func_dirname "$arg" "/" ""
++ xdir="$func_dirname_result"
++
++ if test "$pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ pic_object="$xdir$pic_object"
++
++ if test "$prev" = dlfiles; then
++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++ func_append dlfiles " $pic_object"
++ prev=
++ continue
++ else
++ # If libtool objects are unsupported, then we need to preload.
++ prev=dlprefiles
++ fi
++ fi
++
++ # CHECK ME: I think I busted this. -Ossama
++ if test "$prev" = dlprefiles; then
++ # Preload the old-style object.
++ func_append dlprefiles " $pic_object"
++ prev=
++ fi
++
++ # A PIC object.
++ func_append libobjs " $pic_object"
++ arg="$pic_object"
++ fi
++
++ # Non-PIC object.
++ if test "$non_pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ non_pic_object="$xdir$non_pic_object"
++
++ # A standard non-PIC object
++ func_append non_pic_objects " $non_pic_object"
++ if test -z "$pic_object" || test "$pic_object" = none ; then
++ arg="$non_pic_object"
++ fi
++ else
++ # If the PIC object exists, use it instead.
++ # $xdir was prepended to $pic_object above.
++ non_pic_object="$pic_object"
++ func_append non_pic_objects " $non_pic_object"
++ fi
++ else
++ # Only an error if not doing a dry-run.
++ if $opt_dry_run; then
++ # Extract subdirectory from the argument.
++ func_dirname "$arg" "/" ""
++ xdir="$func_dirname_result"
++
++ func_lo2o "$arg"
++ pic_object=$xdir$objdir/$func_lo2o_result
++ non_pic_object=$xdir$func_lo2o_result
++ func_append libobjs " $pic_object"
++ func_append non_pic_objects " $non_pic_object"
++ else
++ func_fatal_error "\`$arg' is not a valid libtool object"
++ fi
++ fi
++ done
++ else
++ func_fatal_error "link input file \`$arg' does not exist"
++ fi
++ arg=$save_arg
++ prev=
++ continue
++ ;;
++ precious_regex)
++ precious_files_regex="$arg"
++ prev=
++ continue
++ ;;
++ release)
++ release="-$arg"
++ prev=
++ continue
++ ;;
++ rpath | xrpath)
++ # We need an absolute path.
++ case $arg in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ func_fatal_error "only absolute run-paths are allowed"
++ ;;
++ esac
++ if test "$prev" = rpath; then
++ case "$rpath " in
++ *" $arg "*) ;;
++ *) func_append rpath " $arg" ;;
++ esac
++ else
++ case "$xrpath " in
++ *" $arg "*) ;;
++ *) func_append xrpath " $arg" ;;
++ esac
++ fi
++ prev=
++ continue
++ ;;
++ shrext)
++ shrext_cmds="$arg"
++ prev=
++ continue
++ ;;
++ weak)
++ func_append weak_libs " $arg"
++ prev=
++ continue
++ ;;
++ xcclinker)
++ func_append linker_flags " $qarg"
++ func_append compiler_flags " $qarg"
++ prev=
++ func_append compile_command " $qarg"
++ func_append finalize_command " $qarg"
++ continue
++ ;;
++ xcompiler)
++ func_append compiler_flags " $qarg"
++ prev=
++ func_append compile_command " $qarg"
++ func_append finalize_command " $qarg"
++ continue
++ ;;
++ xlinker)
++ func_append linker_flags " $qarg"
++ func_append compiler_flags " $wl$qarg"
++ prev=
++ func_append compile_command " $wl$qarg"
++ func_append finalize_command " $wl$qarg"
++ continue
++ ;;
++ *)
++ eval "$prev=\"\$arg\""
++ prev=
++ continue
++ ;;
++ esac
++ fi # test -n "$prev"
++
++ prevarg="$arg"
++
++ case $arg in
++ -all-static)
++ if test -n "$link_static_flag"; then
++ # See comment for -static flag below, for more details.
++ func_append compile_command " $link_static_flag"
++ func_append finalize_command " $link_static_flag"
++ fi
++ continue
++ ;;
++
++ -allow-undefined)
++ # FIXME: remove this flag sometime in the future.
++ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
++ ;;
++
++ -avoid-version)
++ avoid_version=yes
++ continue
++ ;;
++
++ -bindir)
++ prev=bindir
++ continue
++ ;;
++
++ -dlopen)
++ prev=dlfiles
++ continue
++ ;;
++
++ -dlpreopen)
++ prev=dlprefiles
++ continue
++ ;;
++
++ -export-dynamic)
++ export_dynamic=yes
++ continue
++ ;;
++
++ -export-symbols | -export-symbols-regex)
++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++ func_fatal_error "more than one -exported-symbols argument is not allowed"
++ fi
++ if test "X$arg" = "X-export-symbols"; then
++ prev=expsyms
++ else
++ prev=expsyms_regex
++ fi
++ continue
++ ;;
++
++ -framework)
++ prev=framework
++ continue
++ ;;
++
++ -inst-prefix-dir)
++ prev=inst_prefix
++ continue
++ ;;
++
++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++ # so, if we see these flags be careful not to treat them like -L
++ -L[A-Z][A-Z]*:*)
++ case $with_gcc/$host in
++ no/*-*-irix* | /*-*-irix*)
++ func_append compile_command " $arg"
++ func_append finalize_command " $arg"
++ ;;
++ esac
++ continue
++ ;;
++
++ -L*)
++ func_stripname "-L" '' "$arg"
++ if test -z "$func_stripname_result"; then
++ if test "$#" -gt 0; then
++ func_fatal_error "require no space between \`-L' and \`$1'"
++ else
++ func_fatal_error "need path for \`-L' option"
++ fi
++ fi
++ func_resolve_sysroot "$func_stripname_result"
++ dir=$func_resolve_sysroot_result
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ absdir=`cd "$dir" && pwd`
++ test -z "$absdir" && \
++ func_fatal_error "cannot determine absolute directory name of \`$dir'"
++ dir="$absdir"
++ ;;
++ esac
++ case "$deplibs " in
++ *" -L$dir "* | *" $arg "*)
++ # Will only happen for absolute or sysroot arguments
++ ;;
++ *)
++ # Preserve sysroot, but never include relative directories
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
++ *) func_append deplibs " -L$dir" ;;
++ esac
++ func_append lib_search_path " $dir"
++ ;;
++ esac
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
++ case :$dllsearchpath: in
++ *":$dir:"*) ;;
++ ::) dllsearchpath=$dir;;
++ *) func_append dllsearchpath ":$dir";;
++ esac
++ case :$dllsearchpath: in
++ *":$testbindir:"*) ;;
++ ::) dllsearchpath=$testbindir;;
++ *) func_append dllsearchpath ":$testbindir";;
++ esac
++ ;;
++ esac
++ continue
++ ;;
++
++ -l*)
++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
++ # These systems don't actually have a C or math library (as such)
++ continue
++ ;;
++ *-*-os2*)
++ # These systems don't actually have a C library (as such)
++ test "X$arg" = "X-lc" && continue
++ ;;
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++ # Do not include libc due to us having libc/libc_r.
++ test "X$arg" = "X-lc" && continue
++ ;;
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # Rhapsody C and math libraries are in the System framework
++ func_append deplibs " System.ltframework"
++ continue
++ ;;
++ *-*-sco3.2v5* | *-*-sco5v6*)
++ # Causes problems with __ctype
++ test "X$arg" = "X-lc" && continue
++ ;;
++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++ # Compiler inserts libc in the correct place for threads to work
++ test "X$arg" = "X-lc" && continue
++ ;;
++ esac
++ elif test "X$arg" = "X-lc_r"; then
++ case $host in
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++ # Do not include libc_r directly, use -pthread flag.
++ continue
++ ;;
++ esac
++ fi
++ func_append deplibs " $arg"
++ continue
++ ;;
++
++ -module)
++ module=yes
++ continue
++ ;;
++
++ # Tru64 UNIX uses -model [arg] to determine the layout of C++
++ # classes, name mangling, and exception handling.
++ # Darwin uses the -arch flag to determine output architecture.
++ -model|-arch|-isysroot|--sysroot)
++ func_append compiler_flags " $arg"
++ func_append compile_command " $arg"
++ func_append finalize_command " $arg"
++ prev=xcompiler
++ continue
++ ;;
++
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
++ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
++ func_append compiler_flags " $arg"
++ func_append compile_command " $arg"
++ func_append finalize_command " $arg"
++ case "$new_inherited_linker_flags " in
++ *" $arg "*) ;;
++ * ) func_append new_inherited_linker_flags " $arg" ;;
++ esac
++ continue
++ ;;
++
++ -multi_module)
++ single_module="${wl}-multi_module"
++ continue
++ ;;
++
++ -no-fast-install)
++ fast_install=no
++ continue
++ ;;
++
++ -no-install)
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
++ # The PATH hackery in wrapper scripts is required on Windows
++ # and Darwin in order for the loader to find any dlls it needs.
++ func_warning "\`-no-install' is ignored for $host"
++ func_warning "assuming \`-no-fast-install' instead"
++ fast_install=no
++ ;;
++ *) no_install=yes ;;
++ esac
++ continue
++ ;;
++
++ -no-undefined)
++ allow_undefined=no
++ continue
++ ;;
++
++ -objectlist)
++ prev=objectlist
++ continue
++ ;;
++
++ -o) prev=output ;;
++
++ -precious-files-regex)
++ prev=precious_regex
++ continue
++ ;;
++
++ -release)
++ prev=release
++ continue
++ ;;
++
++ -rpath)
++ prev=rpath
++ continue
++ ;;
++
++ -R)
++ prev=xrpath
++ continue
++ ;;
++
++ -R*)
++ func_stripname '-R' '' "$arg"
++ dir=$func_stripname_result
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ =*)
++ func_stripname '=' '' "$dir"
++ dir=$lt_sysroot$func_stripname_result
++ ;;
++ *)
++ func_fatal_error "only absolute run-paths are allowed"
++ ;;
++ esac
++ case "$xrpath " in
++ *" $dir "*) ;;
++ *) func_append xrpath " $dir" ;;
++ esac
++ continue
++ ;;
++
++ -shared)
++ # The effects of -shared are defined in a previous loop.
++ continue
++ ;;
++
++ -shrext)
++ prev=shrext
++ continue
++ ;;
++
++ -static | -static-libtool-libs)
++ # The effects of -static are defined in a previous loop.
++ # We used to do the same as -all-static on platforms that
++ # didn't have a PIC flag, but the assumption that the effects
++ # would be equivalent was wrong. It would break on at least
++ # Digital Unix and AIX.
++ continue
++ ;;
++
++ -thread-safe)
++ thread_safe=yes
++ continue
++ ;;
++
++ -version-info)
++ prev=vinfo
++ continue
++ ;;
++
++ -version-number)
++ prev=vinfo
++ vinfo_number=yes
++ continue
++ ;;
++
++ -weak)
++ prev=weak
++ continue
++ ;;
++
++ -Wc,*)
++ func_stripname '-Wc,' '' "$arg"
++ args=$func_stripname_result
++ arg=
++ save_ifs="$IFS"; IFS=','
++ for flag in $args; do
++ IFS="$save_ifs"
++ func_quote_for_eval "$flag"
++ func_append arg " $func_quote_for_eval_result"
++ func_append compiler_flags " $func_quote_for_eval_result"
++ done
++ IFS="$save_ifs"
++ func_stripname ' ' '' "$arg"
++ arg=$func_stripname_result
++ ;;
++
++ -Wl,*)
++ func_stripname '-Wl,' '' "$arg"
++ args=$func_stripname_result
++ arg=
++ save_ifs="$IFS"; IFS=','
++ for flag in $args; do
++ IFS="$save_ifs"
++ func_quote_for_eval "$flag"
++ func_append arg " $wl$func_quote_for_eval_result"
++ func_append compiler_flags " $wl$func_quote_for_eval_result"
++ func_append linker_flags " $func_quote_for_eval_result"
++ done
++ IFS="$save_ifs"
++ func_stripname ' ' '' "$arg"
++ arg=$func_stripname_result
++ ;;
++
++ -Xcompiler)
++ prev=xcompiler
++ continue
++ ;;
++
++ -Xlinker)
++ prev=xlinker
++ continue
++ ;;
++
++ -XCClinker)
++ prev=xcclinker
++ continue
++ ;;
++
++ # -msg_* for osf cc
++ -msg_*)
++ func_quote_for_eval "$arg"
++ arg="$func_quote_for_eval_result"
++ ;;
++
++ # Flags to be passed through unchanged, with rationale:
++ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
++ # -r[0-9][0-9]* specify processor for the SGI compiler
++ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
++ # +DA*, +DD* enable 64-bit mode for the HP compiler
++ # -q* compiler args for the IBM compiler
++ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
++ # -F/path path to uninstalled frameworks, gcc on darwin
++ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
++ # @file GCC response files
++ # -tp=* Portland pgcc target processor selection
++ # --sysroot=* for sysroot support
++ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
++ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
++ func_quote_for_eval "$arg"
++ arg="$func_quote_for_eval_result"
++ func_append compile_command " $arg"
++ func_append finalize_command " $arg"
++ func_append compiler_flags " $arg"
++ continue
++ ;;
++
++ # Some other compiler flag.
++ -* | +*)
++ func_quote_for_eval "$arg"
++ arg="$func_quote_for_eval_result"
++ ;;
++
++ *.$objext)
++ # A standard object.
++ func_append objs " $arg"
++ ;;
++
++ *.lo)
++ # A libtool-controlled object.
++
++ # Check to see that this really is a libtool object.
++ if func_lalib_unsafe_p "$arg"; then
++ pic_object=
++ non_pic_object=
++
++ # Read the .lo file
++ func_source "$arg"
++
++ if test -z "$pic_object" ||
++ test -z "$non_pic_object" ||
++ test "$pic_object" = none &&
++ test "$non_pic_object" = none; then
++ func_fatal_error "cannot find name of object for \`$arg'"
++ fi
++
++ # Extract subdirectory from the argument.
++ func_dirname "$arg" "/" ""
++ xdir="$func_dirname_result"
++
++ if test "$pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ pic_object="$xdir$pic_object"
++
++ if test "$prev" = dlfiles; then
++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++ func_append dlfiles " $pic_object"
++ prev=
++ continue
++ else
++ # If libtool objects are unsupported, then we need to preload.
++ prev=dlprefiles
++ fi
++ fi
++
++ # CHECK ME: I think I busted this. -Ossama
++ if test "$prev" = dlprefiles; then
++ # Preload the old-style object.
++ func_append dlprefiles " $pic_object"
++ prev=
++ fi
++
++ # A PIC object.
++ func_append libobjs " $pic_object"
++ arg="$pic_object"
++ fi
++
++ # Non-PIC object.
++ if test "$non_pic_object" != none; then
++ # Prepend the subdirectory the object is found in.
++ non_pic_object="$xdir$non_pic_object"
++
++ # A standard non-PIC object
++ func_append non_pic_objects " $non_pic_object"
++ if test -z "$pic_object" || test "$pic_object" = none ; then
++ arg="$non_pic_object"
++ fi
++ else
++ # If the PIC object exists, use it instead.
++ # $xdir was prepended to $pic_object above.
++ non_pic_object="$pic_object"
++ func_append non_pic_objects " $non_pic_object"
++ fi
++ else
++ # Only an error if not doing a dry-run.
++ if $opt_dry_run; then
++ # Extract subdirectory from the argument.
++ func_dirname "$arg" "/" ""
++ xdir="$func_dirname_result"
++
++ func_lo2o "$arg"
++ pic_object=$xdir$objdir/$func_lo2o_result
++ non_pic_object=$xdir$func_lo2o_result
++ func_append libobjs " $pic_object"
++ func_append non_pic_objects " $non_pic_object"
++ else
++ func_fatal_error "\`$arg' is not a valid libtool object"
++ fi
++ fi
++ ;;
++
++ *.$libext)
++ # An archive.
++ func_append deplibs " $arg"
++ func_append old_deplibs " $arg"
++ continue
++ ;;
++
++ *.la)
++ # A libtool-controlled library.
++
++ func_resolve_sysroot "$arg"
++ if test "$prev" = dlfiles; then
++ # This library was specified with -dlopen.
++ func_append dlfiles " $func_resolve_sysroot_result"
++ prev=
++ elif test "$prev" = dlprefiles; then
++ # The library was specified with -dlpreopen.
++ func_append dlprefiles " $func_resolve_sysroot_result"
++ prev=
++ else
++ func_append deplibs " $func_resolve_sysroot_result"
++ fi
++ continue
++ ;;
++
++ # Some other compiler argument.
++ *)
++ # Unknown arguments in both finalize_command and compile_command need
++ # to be aesthetically quoted because they are evaled later.
++ func_quote_for_eval "$arg"
++ arg="$func_quote_for_eval_result"
++ ;;
++ esac # arg
++
++ # Now actually substitute the argument into the commands.
++ if test -n "$arg"; then
++ func_append compile_command " $arg"
++ func_append finalize_command " $arg"
++ fi
++ done # argument parsing loop
++
++ test -n "$prev" && \
++ func_fatal_help "the \`$prevarg' option requires an argument"
++
++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++ eval arg=\"$export_dynamic_flag_spec\"
++ func_append compile_command " $arg"
++ func_append finalize_command " $arg"
++ fi
++
++ oldlibs=
++ # calculate the name of the file, without its directory
++ func_basename "$output"
++ outputname="$func_basename_result"
++ libobjs_save="$libobjs"
++
++ if test -n "$shlibpath_var"; then
++ # get the directories listed in $shlibpath_var
++ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
++ else
++ shlib_search_path=
++ fi
++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++
++ func_dirname "$output" "/" ""
++ output_objdir="$func_dirname_result$objdir"
++ func_to_tool_file "$output_objdir/"
++ tool_output_objdir=$func_to_tool_file_result
++ # Create the object directory.
++ func_mkdir_p "$output_objdir"
++
++ # Determine the type of output
++ case $output in
++ "")
++ func_fatal_help "you must specify an output file"
++ ;;
++ *.$libext) linkmode=oldlib ;;
++ *.lo | *.$objext) linkmode=obj ;;
++ *.la) linkmode=lib ;;
++ *) linkmode=prog ;; # Anything else should be a program.
++ esac
++
++ specialdeplibs=
++
++ libs=
++ # Find all interdependent deplibs by searching for libraries
++ # that are linked more than once (e.g. -la -lb -la)
++ for deplib in $deplibs; do
++ if $opt_preserve_dup_deps ; then
++ case "$libs " in
++ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
++ esac
++ fi
++ func_append libs " $deplib"
++ done
++
++ if test "$linkmode" = lib; then
++ libs="$predeps $libs $compiler_lib_search_path $postdeps"
++
++ # Compute libraries that are listed more than once in $predeps
++ # $postdeps and mark them as special (i.e., whose duplicates are
++ # not to be eliminated).
++ pre_post_deps=
++ if $opt_duplicate_compiler_generated_deps; then
++ for pre_post_dep in $predeps $postdeps; do
++ case "$pre_post_deps " in
++ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
++ esac
++ func_append pre_post_deps " $pre_post_dep"
++ done
++ fi
++ pre_post_deps=
++ fi
++
++ deplibs=
++ newdependency_libs=
++ newlib_search_path=
++ need_relink=no # whether we're linking any uninstalled libtool libraries
++ notinst_deplibs= # not-installed libtool libraries
++ notinst_path= # paths that contain not-installed libtool libraries
++
++ case $linkmode in
++ lib)
++ passes="conv dlpreopen link"
++ for file in $dlfiles $dlprefiles; do
++ case $file in
++ *.la) ;;
++ *)
++ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
++ ;;
++ esac
++ done
++ ;;
++ prog)
++ compile_deplibs=
++ finalize_deplibs=
++ alldeplibs=no
++ newdlfiles=
++ newdlprefiles=
++ passes="conv scan dlopen dlpreopen link"
++ ;;
++ *) passes="conv"
++ ;;
++ esac
++
++ for pass in $passes; do
++ # The preopen pass in lib mode reverses $deplibs; put it back here
++ # so that -L comes before libs that need it for instance...
++ if test "$linkmode,$pass" = "lib,link"; then
++ ## FIXME: Find the place where the list is rebuilt in the wrong
++ ## order, and fix it there properly
++ tmp_deplibs=
++ for deplib in $deplibs; do
++ tmp_deplibs="$deplib $tmp_deplibs"
++ done
++ deplibs="$tmp_deplibs"
++ fi
++
++ if test "$linkmode,$pass" = "lib,link" ||
++ test "$linkmode,$pass" = "prog,scan"; then
++ libs="$deplibs"
++ deplibs=
++ fi
++ if test "$linkmode" = prog; then
++ case $pass in
++ dlopen) libs="$dlfiles" ;;
++ dlpreopen) libs="$dlprefiles" ;;
++ link)
++ libs="$deplibs %DEPLIBS%"
++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++ ;;
++ esac
++ fi
++ if test "$linkmode,$pass" = "lib,dlpreopen"; then
++ # Collect and forward deplibs of preopened libtool libs
++ for lib in $dlprefiles; do
++ # Ignore non-libtool-libs
++ dependency_libs=
++ func_resolve_sysroot "$lib"
++ case $lib in
++ *.la) func_source "$func_resolve_sysroot_result" ;;
++ esac
++
++ # Collect preopened libtool deplibs, except any this library
++ # has declared as weak libs
++ for deplib in $dependency_libs; do
++ func_basename "$deplib"
++ deplib_base=$func_basename_result
++ case " $weak_libs " in
++ *" $deplib_base "*) ;;
++ *) func_append deplibs " $deplib" ;;
++ esac
++ done
++ done
++ libs="$dlprefiles"
++ fi
++ if test "$pass" = dlopen; then
++ # Collect dlpreopened libraries
++ save_deplibs="$deplibs"
++ deplibs=
++ fi
++
++ for deplib in $libs; do
++ lib=
++ found=no
++ case $deplib in
++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
++ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ func_append compiler_flags " $deplib"
++ if test "$linkmode" = lib ; then
++ case "$new_inherited_linker_flags " in
++ *" $deplib "*) ;;
++ * ) func_append new_inherited_linker_flags " $deplib" ;;
++ esac
++ fi
++ fi
++ continue
++ ;;
++ -l*)
++ if test "$linkmode" != lib && test "$linkmode" != prog; then
++ func_warning "\`-l' is ignored for archives/objects"
++ continue
++ fi
++ func_stripname '-l' '' "$deplib"
++ name=$func_stripname_result
++ if test "$linkmode" = lib; then
++ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
++ else
++ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
++ fi
++ for searchdir in $searchdirs; do
++ for search_ext in .la $std_shrext .so .a; do
++ # Search the libtool library
++ lib="$searchdir/lib${name}${search_ext}"
++ if test -f "$lib"; then
++ if test "$search_ext" = ".la"; then
++ found=yes
++ else
++ found=no
++ fi
++ break 2
++ fi
++ done
++ done
++ if test "$found" != yes; then
++ # deplib doesn't seem to be a libtool library
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++ fi
++ continue
++ else # deplib is a libtool library
++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
++ # We need to do some special things here, and not later.
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $deplib "*)
++ if func_lalib_p "$lib"; then
++ library_names=
++ old_library=
++ func_source "$lib"
++ for l in $old_library $library_names; do
++ ll="$l"
++ done
++ if test "X$ll" = "X$old_library" ; then # only static version available
++ found=no
++ func_dirname "$lib" "" "."
++ ladir="$func_dirname_result"
++ lib=$ladir/$old_library
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++ fi
++ continue
++ fi
++ fi
++ ;;
++ *) ;;
++ esac
++ fi
++ fi
++ ;; # -l
++ *.ltframework)
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ if test "$linkmode" = lib ; then
++ case "$new_inherited_linker_flags " in
++ *" $deplib "*) ;;
++ * ) func_append new_inherited_linker_flags " $deplib" ;;
++ esac
++ fi
++ fi
++ continue
++ ;;
++ -L*)
++ case $linkmode in
++ lib)
++ deplibs="$deplib $deplibs"
++ test "$pass" = conv && continue
++ newdependency_libs="$deplib $newdependency_libs"
++ func_stripname '-L' '' "$deplib"
++ func_resolve_sysroot "$func_stripname_result"
++ func_append newlib_search_path " $func_resolve_sysroot_result"
++ ;;
++ prog)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ if test "$pass" = scan; then
++ deplibs="$deplib $deplibs"
++ else
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ fi
++ func_stripname '-L' '' "$deplib"
++ func_resolve_sysroot "$func_stripname_result"
++ func_append newlib_search_path " $func_resolve_sysroot_result"
++ ;;
++ *)
++ func_warning "\`-L' is ignored for archives/objects"
++ ;;
++ esac # linkmode
++ continue
++ ;; # -L
++ -R*)
++ if test "$pass" = link; then
++ func_stripname '-R' '' "$deplib"
++ func_resolve_sysroot "$func_stripname_result"
++ dir=$func_resolve_sysroot_result
++ # Make sure the xrpath contains only unique directories.
++ case "$xrpath " in
++ *" $dir "*) ;;
++ *) func_append xrpath " $dir" ;;
++ esac
++ fi
++ deplibs="$deplib $deplibs"
++ continue
++ ;;
++ *.la)
++ func_resolve_sysroot "$deplib"
++ lib=$func_resolve_sysroot_result
++ ;;
++ *.$libext)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ case $linkmode in
++ lib)
++ # Linking convenience modules into shared libraries is allowed,
++ # but linking other static libraries is non-portable.
++ case " $dlpreconveniencelibs " in
++ *" $deplib "*) ;;
++ *)
++ valid_a_lib=no
++ case $deplibs_check_method in
++ match_pattern*)
++ set dummy $deplibs_check_method; shift
++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
++ | $EGREP "$match_pattern_regex" > /dev/null; then
++ valid_a_lib=yes
++ fi
++ ;;
++ pass_all)
++ valid_a_lib=yes
++ ;;
++ esac
++ if test "$valid_a_lib" != yes; then
++ echo
++ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because the file extensions .$libext of this argument makes me believe"
++ echo "*** that it is just a static archive that I should not use here."
++ else
++ echo
++ $ECHO "*** Warning: Linking the shared library $output against the"
++ $ECHO "*** static library $deplib is not portable!"
++ deplibs="$deplib $deplibs"
++ fi
++ ;;
++ esac
++ continue
++ ;;
++ prog)
++ if test "$pass" != link; then
++ deplibs="$deplib $deplibs"
++ else
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ fi
++ continue
++ ;;
++ esac # linkmode
++ ;; # *.$libext
++ *.lo | *.$objext)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ elif test "$linkmode" = prog; then
++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ # If there is no dlopen support or we're linking statically,
++ # we need to preload.
++ func_append newdlprefiles " $deplib"
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ func_append newdlfiles " $deplib"
++ fi
++ fi
++ continue
++ ;;
++ %DEPLIBS%)
++ alldeplibs=yes
++ continue
++ ;;
++ esac # case $deplib
++
++ if test "$found" = yes || test -f "$lib"; then :
++ else
++ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
++ fi
++
++ # Check to see that this really is a libtool archive.
++ func_lalib_unsafe_p "$lib" \
++ || func_fatal_error "\`$lib' is not a valid libtool archive"
++
++ func_dirname "$lib" "" "."
++ ladir="$func_dirname_result"
++
++ dlname=
++ dlopen=
++ dlpreopen=
++ libdir=
++ library_names=
++ old_library=
++ inherited_linker_flags=
++ # If the library was installed with an old release of libtool,
++ # it will not redefine variables installed, or shouldnotlink
++ installed=yes
++ shouldnotlink=no
++ avoidtemprpath=
++
++
++ # Read the .la file
++ func_source "$lib"
++
++ # Convert "-framework foo" to "foo.ltframework"
++ if test -n "$inherited_linker_flags"; then
++ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
++ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
++ case " $new_inherited_linker_flags " in
++ *" $tmp_inherited_linker_flag "*) ;;
++ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
++ esac
++ done
++ fi
++ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ if test "$linkmode,$pass" = "lib,link" ||
++ test "$linkmode,$pass" = "prog,scan" ||
++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
++ test -n "$dlopen" && func_append dlfiles " $dlopen"
++ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
++ fi
++
++ if test "$pass" = conv; then
++ # Only check for convenience libraries
++ deplibs="$lib $deplibs"
++ if test -z "$libdir"; then
++ if test -z "$old_library"; then
++ func_fatal_error "cannot find name of link library for \`$lib'"
++ fi
++ # It is a libtool convenience library, so add in its objects.
++ func_append convenience " $ladir/$objdir/$old_library"
++ func_append old_convenience " $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ if $opt_preserve_dup_deps ; then
++ case "$tmp_libs " in
++ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
++ esac
++ fi
++ func_append tmp_libs " $deplib"
++ done
++ elif test "$linkmode" != prog && test "$linkmode" != lib; then
++ func_fatal_error "\`$lib' is not a convenience library"
++ fi
++ continue
++ fi # $pass = conv
++
++
++ # Get the name of the library we link against.
++ linklib=
++ if test -n "$old_library" &&
++ { test "$prefer_static_libs" = yes ||
++ test "$prefer_static_libs,$installed" = "built,no"; }; then
++ linklib=$old_library
++ else
++ for l in $old_library $library_names; do
++ linklib="$l"
++ done
++ fi
++ if test -z "$linklib"; then
++ func_fatal_error "cannot find name of link library for \`$lib'"
++ fi
++
++ # This library was specified with -dlopen.
++ if test "$pass" = dlopen; then
++ if test -z "$libdir"; then
++ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
++ fi
++ if test -z "$dlname" ||
++ test "$dlopen_support" != yes ||
++ test "$build_libtool_libs" = no; then
++ # If there is no dlname, no dlopen support or we're linking
++ # statically, we need to preload. We also need to preload any
++ # dependent libraries so libltdl's deplib preloader doesn't
++ # bomb out in the load deplibs phase.
++ func_append dlprefiles " $lib $dependency_libs"
++ else
++ func_append newdlfiles " $lib"
++ fi
++ continue
++ fi # $pass = dlopen
++
++ # We need an absolute path.
++ case $ladir in
++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
++ *)
++ abs_ladir=`cd "$ladir" && pwd`
++ if test -z "$abs_ladir"; then
++ func_warning "cannot determine absolute directory name of \`$ladir'"
++ func_warning "passing it literally to the linker, although it might fail"
++ abs_ladir="$ladir"
++ fi
++ ;;
++ esac
++ func_basename "$lib"
++ laname="$func_basename_result"
++
++ # Find the relevant object directory and library name.
++ if test "X$installed" = Xyes; then
++ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ func_warning "library \`$lib' was moved."
++ dir="$ladir"
++ absdir="$abs_ladir"
++ libdir="$abs_ladir"
++ else
++ dir="$lt_sysroot$libdir"
++ absdir="$lt_sysroot$libdir"
++ fi
++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
++ else
++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ dir="$ladir"
++ absdir="$abs_ladir"
++ # Remove this search path later
++ func_append notinst_path " $abs_ladir"
++ else
++ dir="$ladir/$objdir"
++ absdir="$abs_ladir/$objdir"
++ # Remove this search path later
++ func_append notinst_path " $abs_ladir"
++ fi
++ fi # $installed = yes
++ func_stripname 'lib' '.la' "$laname"
++ name=$func_stripname_result
++
++ # This library was specified with -dlpreopen.
++ if test "$pass" = dlpreopen; then
++ if test -z "$libdir" && test "$linkmode" = prog; then
++ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
++ fi
++ case "$host" in
++ # special handling for platforms with PE-DLLs.
++ *cygwin* | *mingw* | *cegcc* )
++ # Linker will automatically link against shared library if both
++ # static and shared are present. Therefore, ensure we extract
++ # symbols from the import library if a shared library is present
++ # (otherwise, the dlopen module name will be incorrect). We do
++ # this by putting the import library name into $newdlprefiles.
++ # We recover the dlopen module name by 'saving' the la file
++ # name in a special purpose variable, and (later) extracting the
++ # dlname from the la file.
++ if test -n "$dlname"; then
++ func_tr_sh "$dir/$linklib"
++ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
++ func_append newdlprefiles " $dir/$linklib"
++ else
++ func_append newdlprefiles " $dir/$old_library"
++ # Keep a list of preopened convenience libraries to check
++ # that they are being used correctly in the link pass.
++ test -z "$libdir" && \
++ func_append dlpreconveniencelibs " $dir/$old_library"
++ fi
++ ;;
++ * )
++ # Prefer using a static library (so that no silly _DYNAMIC symbols
++ # are required to link).
++ if test -n "$old_library"; then
++ func_append newdlprefiles " $dir/$old_library"
++ # Keep a list of preopened convenience libraries to check
++ # that they are being used correctly in the link pass.
++ test -z "$libdir" && \
++ func_append dlpreconveniencelibs " $dir/$old_library"
++ # Otherwise, use the dlname, so that lt_dlopen finds it.
++ elif test -n "$dlname"; then
++ func_append newdlprefiles " $dir/$dlname"
++ else
++ func_append newdlprefiles " $dir/$linklib"
++ fi
++ ;;
++ esac
++ fi # $pass = dlpreopen
++
++ if test -z "$libdir"; then
++ # Link the convenience library
++ if test "$linkmode" = lib; then
++ deplibs="$dir/$old_library $deplibs"
++ elif test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$dir/$old_library $compile_deplibs"
++ finalize_deplibs="$dir/$old_library $finalize_deplibs"
++ else
++ deplibs="$lib $deplibs" # used for prog,scan pass
++ fi
++ continue
++ fi
++
++
++ if test "$linkmode" = prog && test "$pass" != link; then
++ func_append newlib_search_path " $ladir"
++ deplibs="$lib $deplibs"
++
++ linkalldeplibs=no
++ if test "$link_all_deplibs" != no || test -z "$library_names" ||
++ test "$build_libtool_libs" = no; then
++ linkalldeplibs=yes
++ fi
++
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ case $deplib in
++ -L*) func_stripname '-L' '' "$deplib"
++ func_resolve_sysroot "$func_stripname_result"
++ func_append newlib_search_path " $func_resolve_sysroot_result"
++ ;;
++ esac
++ # Need to link against all dependency_libs?
++ if test "$linkalldeplibs" = yes; then
++ deplibs="$deplib $deplibs"
++ else
++ # Need to hardcode shared library paths
++ # or/and link against static libraries
++ newdependency_libs="$deplib $newdependency_libs"
++ fi
++ if $opt_preserve_dup_deps ; then
++ case "$tmp_libs " in
++ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
++ esac
++ fi
++ func_append tmp_libs " $deplib"
++ done # for deplib
++ continue
++ fi # $linkmode = prog...
++
++ if test "$linkmode,$pass" = "prog,link"; then
++ if test -n "$library_names" &&
++ { { test "$prefer_static_libs" = no ||
++ test "$prefer_static_libs,$installed" = "built,yes"; } ||
++ test -z "$old_library"; }; then
++ # We need to hardcode the library path
++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
++ # Make sure the rpath contains only unique directories.
++ case "$temp_rpath:" in
++ *"$absdir:"*) ;;
++ *) func_append temp_rpath "$absdir:" ;;
++ esac
++ fi
++
++ # Hardcode the library path.
++ # Skip directories that are in the system default run-time
++ # search path.
++ case " $sys_lib_dlsearch_path " in
++ *" $absdir "*) ;;
++ *)
++ case "$compile_rpath " in
++ *" $absdir "*) ;;
++ *) func_append compile_rpath " $absdir" ;;
++ esac
++ ;;
++ esac
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir "*) ;;
++ *)
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) func_append finalize_rpath " $libdir" ;;
++ esac
++ ;;
++ esac
++ fi # $linkmode,$pass = prog,link...
++
++ if test "$alldeplibs" = yes &&
++ { test "$deplibs_check_method" = pass_all ||
++ { test "$build_libtool_libs" = yes &&
++ test -n "$library_names"; }; }; then
++ # We only need to search for static libraries
++ continue
++ fi
++ fi
++
++ link_static=no # Whether the deplib will be linked statically
++ use_static_libs=$prefer_static_libs
++ if test "$use_static_libs" = built && test "$installed" = yes; then
++ use_static_libs=no
++ fi
++ if test -n "$library_names" &&
++ { test "$use_static_libs" = no || test -z "$old_library"; }; then
++ case $host in
++ *cygwin* | *mingw* | *cegcc*)
++ # No point in relinking DLLs because paths are not encoded
++ func_append notinst_deplibs " $lib"
++ need_relink=no
++ ;;
++ *)
++ if test "$installed" = no; then
++ func_append notinst_deplibs " $lib"
++ need_relink=yes
++ fi
++ ;;
++ esac
++ # This is a shared library
++
++ # Warn about portability, can't link against -module's on some
++ # systems (darwin). Don't bleat about dlopened modules though!
++ dlopenmodule=""
++ for dlpremoduletest in $dlprefiles; do
++ if test "X$dlpremoduletest" = "X$lib"; then
++ dlopenmodule="$dlpremoduletest"
++ break
++ fi
++ done
++ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
++ echo
++ if test "$linkmode" = prog; then
++ $ECHO "*** Warning: Linking the executable $output against the loadable module"
++ else
++ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
++ fi
++ $ECHO "*** $linklib is not portable!"
++ fi
++ if test "$linkmode" = lib &&
++ test "$hardcode_into_libs" = yes; then
++ # Hardcode the library path.
++ # Skip directories that are in the system default run-time
++ # search path.
++ case " $sys_lib_dlsearch_path " in
++ *" $absdir "*) ;;
++ *)
++ case "$compile_rpath " in
++ *" $absdir "*) ;;
++ *) func_append compile_rpath " $absdir" ;;
++ esac
++ ;;
++ esac
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir "*) ;;
++ *)
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) func_append finalize_rpath " $libdir" ;;
++ esac
++ ;;
++ esac
++ fi
++
++ if test -n "$old_archive_from_expsyms_cmds"; then
++ # figure out the soname
++ set dummy $library_names
++ shift
++ realname="$1"
++ shift
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ # use dlname if we got it. it's perfectly good, no?
++ if test -n "$dlname"; then
++ soname="$dlname"
++ elif test -n "$soname_spec"; then
++ # bleh windows
++ case $host in
++ *cygwin* | mingw* | *cegcc*)
++ func_arith $current - $age
++ major=$func_arith_result
++ versuffix="-$major"
++ ;;
++ esac
++ eval soname=\"$soname_spec\"
++ else
++ soname="$realname"
++ fi
++
++ # Make a new name for the extract_expsyms_cmds to use
++ soroot="$soname"
++ func_basename "$soroot"
++ soname="$func_basename_result"
++ func_stripname 'lib' '.dll' "$soname"
++ newlib=libimp-$func_stripname_result.a
++
++ # If the library has no export list, then create one now
++ if test -f "$output_objdir/$soname-def"; then :
++ else
++ func_verbose "extracting exported symbol list from \`$soname'"
++ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
++ fi
++
++ # Create $newlib
++ if test -f "$output_objdir/$newlib"; then :; else
++ func_verbose "generating import library for \`$soname'"
++ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
++ fi
++ # make sure the library variables are pointing to the new library
++ dir=$output_objdir
++ linklib=$newlib
++ fi # test -n "$old_archive_from_expsyms_cmds"
++
++ if test "$linkmode" = prog || test "$opt_mode" != relink; then
++ add_shlibpath=
++ add_dir=
++ add=
++ lib_linked=yes
++ case $hardcode_action in
++ immediate | unsupported)
++ if test "$hardcode_direct" = no; then
++ add="$dir/$linklib"
++ case $host in
++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++ *-*-unixware7*) add_dir="-L$dir" ;;
++ *-*-darwin* )
++ # if the lib is a (non-dlopened) module then we can not
++ # link against it, someone is ignoring the earlier warnings
++ if /usr/bin/file -L $add 2> /dev/null |
++ $GREP ": [^:]* bundle" >/dev/null ; then
++ if test "X$dlopenmodule" != "X$lib"; then
++ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
++ if test -z "$old_library" ; then
++ echo
++ echo "*** And there doesn't seem to be a static archive available"
++ echo "*** The link will probably fail, sorry"
++ else
++ add="$dir/$old_library"
++ fi
++ elif test -n "$old_library"; then
++ add="$dir/$old_library"
++ fi
++ fi
++ esac
++ elif test "$hardcode_minus_L" = no; then
++ case $host in
++ *-*-sunos*) add_shlibpath="$dir" ;;
++ esac
++ add_dir="-L$dir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = no; then
++ add_shlibpath="$dir"
++ add="-l$name"
++ else
++ lib_linked=no
++ fi
++ ;;
++ relink)
++ if test "$hardcode_direct" = yes &&
++ test "$hardcode_direct_absolute" = no; then
++ add="$dir/$linklib"
++ elif test "$hardcode_minus_L" = yes; then
++ add_dir="-L$absdir"
++ # Try looking first in the location we're being installed to.
++ if test -n "$inst_prefix_dir"; then
++ case $libdir in
++ [\\/]*)
++ func_append add_dir " -L$inst_prefix_dir$libdir"
++ ;;
++ esac
++ fi
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = yes; then
++ add_shlibpath="$dir"
++ add="-l$name"
++ else
++ lib_linked=no
++ fi
++ ;;
++ *) lib_linked=no ;;
++ esac
++
++ if test "$lib_linked" != yes; then
++ func_fatal_configuration "unsupported hardcode properties"
++ fi
++
++ if test -n "$add_shlibpath"; then
++ case :$compile_shlibpath: in
++ *":$add_shlibpath:"*) ;;
++ *) func_append compile_shlibpath "$add_shlibpath:" ;;
++ esac
++ fi
++ if test "$linkmode" = prog; then
++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++ test -n "$add" && compile_deplibs="$add $compile_deplibs"
++ else
++ test -n "$add_dir" && deplibs="$add_dir $deplibs"
++ test -n "$add" && deplibs="$add $deplibs"
++ if test "$hardcode_direct" != yes &&
++ test "$hardcode_minus_L" != yes &&
++ test "$hardcode_shlibpath_var" = yes; then
++ case :$finalize_shlibpath: in
++ *":$libdir:"*) ;;
++ *) func_append finalize_shlibpath "$libdir:" ;;
++ esac
++ fi
++ fi
++ fi
++
++ if test "$linkmode" = prog || test "$opt_mode" = relink; then
++ add_shlibpath=
++ add_dir=
++ add=
++ # Finalize command for both is simple: just hardcode it.
++ if test "$hardcode_direct" = yes &&
++ test "$hardcode_direct_absolute" = no; then
++ add="$libdir/$linklib"
++ elif test "$hardcode_minus_L" = yes; then
++ add_dir="-L$libdir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = yes; then
++ case :$finalize_shlibpath: in
++ *":$libdir:"*) ;;
++ *) func_append finalize_shlibpath "$libdir:" ;;
++ esac
++ add="-l$name"
++ elif test "$hardcode_automatic" = yes; then
++ if test -n "$inst_prefix_dir" &&
++ test -f "$inst_prefix_dir$libdir/$linklib" ; then
++ add="$inst_prefix_dir$libdir/$linklib"
++ else
++ add="$libdir/$linklib"
++ fi
++ else
++ # We cannot seem to hardcode it, guess we'll fake it.
++ add_dir="-L$libdir"
++ # Try looking first in the location we're being installed to.
++ if test -n "$inst_prefix_dir"; then
++ case $libdir in
++ [\\/]*)
++ func_append add_dir " -L$inst_prefix_dir$libdir"
++ ;;
++ esac
++ fi
++ add="-l$name"
++ fi
++
++ if test "$linkmode" = prog; then
++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
++ else
++ test -n "$add_dir" && deplibs="$add_dir $deplibs"
++ test -n "$add" && deplibs="$add $deplibs"
++ fi
++ fi
++ elif test "$linkmode" = prog; then
++ # Here we assume that one of hardcode_direct or hardcode_minus_L
++ # is not unsupported. This is valid on all known static and
++ # shared platforms.
++ if test "$hardcode_direct" != unsupported; then
++ test -n "$old_library" && linklib="$old_library"
++ compile_deplibs="$dir/$linklib $compile_deplibs"
++ finalize_deplibs="$dir/$linklib $finalize_deplibs"
++ else
++ compile_deplibs="-l$name -L$dir $compile_deplibs"
++ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
++ fi
++ elif test "$build_libtool_libs" = yes; then
++ # Not a shared library
++ if test "$deplibs_check_method" != pass_all; then
++ # We're trying link a shared library against a static one
++ # but the system doesn't support it.
++
++ # Just print a warning and add the library to dependency_libs so
++ # that the program can be linked against the static library.
++ echo
++ $ECHO "*** Warning: This system can not link to static lib archive $lib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ if test "$module" = yes; then
++ echo "*** But as you try to build a module library, libtool will still create "
++ echo "*** a static module, that should work as long as the dlopening application"
++ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
++ if test -z "$global_symbol_pipe"; then
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ fi
++ if test "$build_old_libs" = no; then
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ fi
++ else
++ deplibs="$dir/$old_library $deplibs"
++ link_static=yes
++ fi
++ fi # link shared/static library?
++
++ if test "$linkmode" = lib; then
++ if test -n "$dependency_libs" &&
++ { test "$hardcode_into_libs" != yes ||
++ test "$build_old_libs" = yes ||
++ test "$link_static" = yes; }; then
++ # Extract -R from dependency_libs
++ temp_deplibs=
++ for libdir in $dependency_libs; do
++ case $libdir in
++ -R*) func_stripname '-R' '' "$libdir"
++ temp_xrpath=$func_stripname_result
++ case " $xrpath " in
++ *" $temp_xrpath "*) ;;
++ *) func_append xrpath " $temp_xrpath";;
++ esac;;
++ *) func_append temp_deplibs " $libdir";;
++ esac
++ done
++ dependency_libs="$temp_deplibs"
++ fi
++
++ func_append newlib_search_path " $absdir"
++ # Link against this library
++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++ # ... and its dependency_libs
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ newdependency_libs="$deplib $newdependency_libs"
++ case $deplib in
++ -L*) func_stripname '-L' '' "$deplib"
++ func_resolve_sysroot "$func_stripname_result";;
++ *) func_resolve_sysroot "$deplib" ;;
++ esac
++ if $opt_preserve_dup_deps ; then
++ case "$tmp_libs " in
++ *" $func_resolve_sysroot_result "*)
++ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
++ esac
++ fi
++ func_append tmp_libs " $func_resolve_sysroot_result"
++ done
++
++ if test "$link_all_deplibs" != no; then
++ # Add the search paths of all dependency libraries
++ for deplib in $dependency_libs; do
++ path=
++ case $deplib in
++ -L*) path="$deplib" ;;
++ *.la)
++ func_resolve_sysroot "$deplib"
++ deplib=$func_resolve_sysroot_result
++ func_dirname "$deplib" "" "."
++ dir=$func_dirname_result
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++ *)
++ absdir=`cd "$dir" && pwd`
++ if test -z "$absdir"; then
++ func_warning "cannot determine absolute directory name of \`$dir'"
++ absdir="$dir"
++ fi
++ ;;
++ esac
++ if $GREP "^installed=no" $deplib > /dev/null; then
++ case $host in
++ *-*-darwin*)
++ depdepl=
++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++ if test -n "$deplibrary_names" ; then
++ for tmp in $deplibrary_names ; do
++ depdepl=$tmp
++ done
++ if test -f "$absdir/$objdir/$depdepl" ; then
++ depdepl="$absdir/$objdir/$depdepl"
++ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
++ if test -z "$darwin_install_name"; then
++ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
++ fi
++ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
++ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
++ path=
++ fi
++ fi
++ ;;
++ *)
++ path="-L$absdir/$objdir"
++ ;;
++ esac
++ else
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ test -z "$libdir" && \
++ func_fatal_error "\`$deplib' is not a valid libtool archive"
++ test "$absdir" != "$libdir" && \
++ func_warning "\`$deplib' seems to be moved"
++
++ path="-L$absdir"
++ fi
++ ;;
++ esac
++ case " $deplibs " in
++ *" $path "*) ;;
++ *) deplibs="$path $deplibs" ;;
++ esac
++ done
++ fi # link_all_deplibs != no
++ fi # linkmode = lib
++ done # for deplib in $libs
++ if test "$pass" = link; then
++ if test "$linkmode" = "prog"; then
++ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
++ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
++ else
++ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ fi
++ fi
++ dependency_libs="$newdependency_libs"
++ if test "$pass" = dlpreopen; then
++ # Link the dlpreopened libraries before other libraries
++ for deplib in $save_deplibs; do
++ deplibs="$deplib $deplibs"
++ done
++ fi
++ if test "$pass" != dlopen; then
++ if test "$pass" != conv; then
++ # Make sure lib_search_path contains only unique directories.
++ lib_search_path=
++ for dir in $newlib_search_path; do
++ case "$lib_search_path " in
++ *" $dir "*) ;;
++ *) func_append lib_search_path " $dir" ;;
++ esac
++ done
++ newlib_search_path=
++ fi
++
++ if test "$linkmode,$pass" != "prog,link"; then
++ vars="deplibs"
++ else
++ vars="compile_deplibs finalize_deplibs"
++ fi
++ for var in $vars dependency_libs; do
++ # Add libraries to $var in reverse order
++ eval tmp_libs=\"\$$var\"
++ new_libs=
++ for deplib in $tmp_libs; do
++ # FIXME: Pedantically, this is the right thing to do, so
++ # that some nasty dependency loop isn't accidentally
++ # broken:
++ #new_libs="$deplib $new_libs"
++ # Pragmatically, this seems to cause very few problems in
++ # practice:
++ case $deplib in
++ -L*) new_libs="$deplib $new_libs" ;;
++ -R*) ;;
++ *)
++ # And here is the reason: when a library appears more
++ # than once as an explicit dependence of a library, or
++ # is implicitly linked in more than once by the
++ # compiler, it is considered special, and multiple
++ # occurrences thereof are not removed. Compare this
++ # with having the same library being listed as a
++ # dependency of multiple other libraries: in this case,
++ # we know (pedantically, we assume) the library does not
++ # need to be listed more than once, so we keep only the
++ # last copy. This is not always right, but it is rare
++ # enough that we require users that really mean to play
++ # such unportable linking tricks to link the library
++ # using -Wl,-lname, so that libtool does not consider it
++ # for duplicate removal.
++ case " $specialdeplibs " in
++ *" $deplib "*) new_libs="$deplib $new_libs" ;;
++ *)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$deplib $new_libs" ;;
++ esac
++ ;;
++ esac
++ ;;
++ esac
++ done
++ tmp_libs=
++ for deplib in $new_libs; do
++ case $deplib in
++ -L*)
++ case " $tmp_libs " in
++ *" $deplib "*) ;;
++ *) func_append tmp_libs " $deplib" ;;
++ esac
++ ;;
++ *) func_append tmp_libs " $deplib" ;;
++ esac
++ done
++ eval $var=\"$tmp_libs\"
++ done # for var
++ fi
++ # Last step: remove runtime libs from dependency_libs
++ # (they stay in deplibs)
++ tmp_libs=
++ for i in $dependency_libs ; do
++ case " $predeps $postdeps $compiler_lib_search_path " in
++ *" $i "*)
++ i=""
++ ;;
++ esac
++ if test -n "$i" ; then
++ func_append tmp_libs " $i"
++ fi
++ done
++ dependency_libs=$tmp_libs
++ done # for pass
++ if test "$linkmode" = prog; then
++ dlfiles="$newdlfiles"
++ fi
++ if test "$linkmode" = prog || test "$linkmode" = lib; then
++ dlprefiles="$newdlprefiles"
++ fi
++
++ case $linkmode in
++ oldlib)
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ func_warning "\`-dlopen' is ignored for archives"
++ fi
++
++ case " $deplibs" in
++ *\ -l* | *\ -L*)
++ func_warning "\`-l' and \`-L' are ignored for archives" ;;
++ esac
++
++ test -n "$rpath" && \
++ func_warning "\`-rpath' is ignored for archives"
++
++ test -n "$xrpath" && \
++ func_warning "\`-R' is ignored for archives"
++
++ test -n "$vinfo" && \
++ func_warning "\`-version-info/-version-number' is ignored for archives"
++
++ test -n "$release" && \
++ func_warning "\`-release' is ignored for archives"
++
++ test -n "$export_symbols$export_symbols_regex" && \
++ func_warning "\`-export-symbols' is ignored for archives"
++
++ # Now set the variables for building old libraries.
++ build_libtool_libs=no
++ oldlibs="$output"
++ func_append objs "$old_deplibs"
++ ;;
++
++ lib)
++ # Make sure we only generate libraries of the form `libNAME.la'.
++ case $outputname in
++ lib*)
++ func_stripname 'lib' '.la' "$outputname"
++ name=$func_stripname_result
++ eval shared_ext=\"$shrext_cmds\"
++ eval libname=\"$libname_spec\"
++ ;;
++ *)
++ test "$module" = no && \
++ func_fatal_help "libtool library \`$output' must begin with \`lib'"
++
++ if test "$need_lib_prefix" != no; then
++ # Add the "lib" prefix for modules if required
++ func_stripname '' '.la' "$outputname"
++ name=$func_stripname_result
++ eval shared_ext=\"$shrext_cmds\"
++ eval libname=\"$libname_spec\"
++ else
++ func_stripname '' '.la' "$outputname"
++ libname=$func_stripname_result
++ fi
++ ;;
++ esac
++
++ if test -n "$objs"; then
++ if test "$deplibs_check_method" != pass_all; then
++ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
++ else
++ echo
++ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
++ $ECHO "*** objects $objs is not portable!"
++ func_append libobjs " $objs"
++ fi
++ fi
++
++ test "$dlself" != no && \
++ func_warning "\`-dlopen self' is ignored for libtool libraries"
++
++ set dummy $rpath
++ shift
++ test "$#" -gt 1 && \
++ func_warning "ignoring multiple \`-rpath's for a libtool library"
++
++ install_libdir="$1"
++
++ oldlibs=
++ if test -z "$rpath"; then
++ if test "$build_libtool_libs" = yes; then
++ # Building a libtool convenience library.
++ # Some compilers have problems with a `.al' extension so
++ # convenience libraries should have the same extension an
++ # archive normally would.
++ oldlibs="$output_objdir/$libname.$libext $oldlibs"
++ build_libtool_libs=convenience
++ build_old_libs=yes
++ fi
++
++ test -n "$vinfo" && \
++ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
++
++ test -n "$release" && \
++ func_warning "\`-release' is ignored for convenience libraries"
++ else
++
++ # Parse the version information argument.
++ save_ifs="$IFS"; IFS=':'
++ set dummy $vinfo 0 0 0
++ shift
++ IFS="$save_ifs"
++
++ test -n "$7" && \
++ func_fatal_help "too many parameters to \`-version-info'"
++
++ # convert absolute version numbers to libtool ages
++ # this retains compatibility with .la files and attempts
++ # to make the code below a bit more comprehensible
++
++ case $vinfo_number in
++ yes)
++ number_major="$1"
++ number_minor="$2"
++ number_revision="$3"
++ #
++ # There are really only two kinds -- those that
++ # use the current revision as the major version
++ # and those that subtract age and use age as
++ # a minor version. But, then there is irix
++ # which has an extra 1 added just for fun
++ #
++ case $version_type in
++ # correct linux to gnu/linux during the next big refactor
++ darwin|linux|osf|windows|none)
++ func_arith $number_major + $number_minor
++ current=$func_arith_result
++ age="$number_minor"
++ revision="$number_revision"
++ ;;
++ freebsd-aout|freebsd-elf|qnx|sunos)
++ current="$number_major"
++ revision="$number_minor"
++ age="0"
++ ;;
++ irix|nonstopux)
++ func_arith $number_major + $number_minor
++ current=$func_arith_result
++ age="$number_minor"
++ revision="$number_minor"
++ lt_irix_increment=no
++ ;;
++ *)
++ func_fatal_configuration "$modename: unknown library version type \`$version_type'"
++ ;;
++ esac
++ ;;
++ no)
++ current="$1"
++ revision="$2"
++ age="$3"
++ ;;
++ esac
++
++ # Check that each of the things are valid numbers.
++ case $current in
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++ *)
++ func_error "CURRENT \`$current' must be a nonnegative integer"
++ func_fatal_error "\`$vinfo' is not valid version information"
++ ;;
++ esac
++
++ case $revision in
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++ *)
++ func_error "REVISION \`$revision' must be a nonnegative integer"
++ func_fatal_error "\`$vinfo' is not valid version information"
++ ;;
++ esac
++
++ case $age in
++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
++ *)
++ func_error "AGE \`$age' must be a nonnegative integer"
++ func_fatal_error "\`$vinfo' is not valid version information"
++ ;;
++ esac
++
++ if test "$age" -gt "$current"; then
++ func_error "AGE \`$age' is greater than the current interface number \`$current'"
++ func_fatal_error "\`$vinfo' is not valid version information"
++ fi
++
++ # Calculate the version variables.
++ major=
++ versuffix=
++ verstring=
++ case $version_type in
++ none) ;;
++
++ darwin)
++ # Like Linux, but with the current version available in
++ # verstring for coding it into the library header
++ func_arith $current - $age
++ major=.$func_arith_result
++ versuffix="$major.$age.$revision"
++ # Darwin ld doesn't like 0 for these options...
++ func_arith $current + 1
++ minor_current=$func_arith_result
++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
++ ;;
++
++ freebsd-aout)
++ major=".$current"
++ versuffix=".$current.$revision";
++ ;;
++
++ freebsd-elf)
++ major=".$current"
++ versuffix=".$current"
++ ;;
++
++ irix | nonstopux)
++ if test "X$lt_irix_increment" = "Xno"; then
++ func_arith $current - $age
++ else
++ func_arith $current - $age + 1
++ fi
++ major=$func_arith_result
++
++ case $version_type in
++ nonstopux) verstring_prefix=nonstopux ;;
++ *) verstring_prefix=sgi ;;
++ esac
++ verstring="$verstring_prefix$major.$revision"
++
++ # Add in all the interfaces that we are compatible with.
++ loop=$revision
++ while test "$loop" -ne 0; do
++ func_arith $revision - $loop
++ iface=$func_arith_result
++ func_arith $loop - 1
++ loop=$func_arith_result
++ verstring="$verstring_prefix$major.$iface:$verstring"
++ done
++
++ # Before this point, $major must not contain `.'.
++ major=.$major
++ versuffix="$major.$revision"
++ ;;
++
++ linux) # correct to gnu/linux during the next big refactor
++ func_arith $current - $age
++ major=.$func_arith_result
++ versuffix="$major.$age.$revision"
++ ;;
++
++ osf)
++ func_arith $current - $age
++ major=.$func_arith_result
++ versuffix=".$current.$age.$revision"
++ verstring="$current.$age.$revision"
++
++ # Add in all the interfaces that we are compatible with.
++ loop=$age
++ while test "$loop" -ne 0; do
++ func_arith $current - $loop
++ iface=$func_arith_result
++ func_arith $loop - 1
++ loop=$func_arith_result
++ verstring="$verstring:${iface}.0"
++ done
++
++ # Make executables depend on our current version.
++ func_append verstring ":${current}.0"
++ ;;
++
++ qnx)
++ major=".$current"
++ versuffix=".$current"
++ ;;
++
++ sunos)
++ major=".$current"
++ versuffix=".$current.$revision"
++ ;;
++
++ windows)
++ # Use '-' rather than '.', since we only want one
++ # extension on DOS 8.3 filesystems.
++ func_arith $current - $age
++ major=$func_arith_result
++ versuffix="-$major"
++ ;;
++
++ *)
++ func_fatal_configuration "unknown library version type \`$version_type'"
++ ;;
++ esac
++
++ # Clear the version info if we defaulted, and they specified a release.
++ if test -z "$vinfo" && test -n "$release"; then
++ major=
++ case $version_type in
++ darwin)
++ # we can't check for "0.0" in archive_cmds due to quoting
++ # problems, so we reset it completely
++ verstring=
++ ;;
++ *)
++ verstring="0.0"
++ ;;
++ esac
++ if test "$need_version" = no; then
++ versuffix=
++ else
++ versuffix=".0.0"
++ fi
++ fi
++
++ # Remove version info from name if versioning should be avoided
++ if test "$avoid_version" = yes && test "$need_version" = no; then
++ major=
++ versuffix=
++ verstring=""
++ fi
++
++ # Check to see if the archive will have undefined symbols.
++ if test "$allow_undefined" = yes; then
++ if test "$allow_undefined_flag" = unsupported; then
++ func_warning "undefined symbols not allowed in $host shared libraries"
++ build_libtool_libs=no
++ build_old_libs=yes
++ fi
++ else
++ # Don't allow undefined symbols.
++ allow_undefined_flag="$no_undefined_flag"
++ fi
++
++ fi
++
++ func_generate_dlsyms "$libname" "$libname" "yes"
++ func_append libobjs " $symfileobj"
++ test "X$libobjs" = "X " && libobjs=
++
++ if test "$opt_mode" != relink; then
++ # Remove our outputs, but don't remove object files since they
++ # may have been created when compiling PIC objects.
++ removelist=
++ tempremovelist=`$ECHO "$output_objdir/*"`
++ for p in $tempremovelist; do
++ case $p in
++ *.$objext | *.gcno)
++ ;;
++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++ if test "X$precious_files_regex" != "X"; then
++ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++ then
++ continue
++ fi
++ fi
++ func_append removelist " $p"
++ ;;
++ *) ;;
++ esac
++ done
++ test -n "$removelist" && \
++ func_show_eval "${RM}r \$removelist"
++ fi
++
++ # Now set the variables for building old libraries.
++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
++ func_append oldlibs " $output_objdir/$libname.$libext"
++
++ # Transform .lo files to .o files.
++ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
++ fi
++
++ # Eliminate all temporary directories.
++ #for path in $notinst_path; do
++ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
++ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
++ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
++ #done
++
++ if test -n "$xrpath"; then
++ # If the user specified any rpath flags, then add them.
++ temp_xrpath=
++ for libdir in $xrpath; do
++ func_replace_sysroot "$libdir"
++ func_append temp_xrpath " -R$func_replace_sysroot_result"
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) func_append finalize_rpath " $libdir" ;;
++ esac
++ done
++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++ dependency_libs="$temp_xrpath $dependency_libs"
++ fi
++ fi
++
++ # Make sure dlfiles contains only unique files that won't be dlpreopened
++ old_dlfiles="$dlfiles"
++ dlfiles=
++ for lib in $old_dlfiles; do
++ case " $dlprefiles $dlfiles " in
++ *" $lib "*) ;;
++ *) func_append dlfiles " $lib" ;;
++ esac
++ done
++
++ # Make sure dlprefiles contains only unique files
++ old_dlprefiles="$dlprefiles"
++ dlprefiles=
++ for lib in $old_dlprefiles; do
++ case "$dlprefiles " in
++ *" $lib "*) ;;
++ *) func_append dlprefiles " $lib" ;;
++ esac
++ done
++
++ if test "$build_libtool_libs" = yes; then
++ if test -n "$rpath"; then
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
++ # these systems don't actually have a c library (as such)!
++ ;;
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # Rhapsody C library is in the System framework
++ func_append deplibs " System.ltframework"
++ ;;
++ *-*-netbsd*)
++ # Don't link with libc until the a.out ld.so is fixed.
++ ;;
++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++ # Do not include libc due to us having libc/libc_r.
++ ;;
++ *-*-sco3.2v5* | *-*-sco5v6*)
++ # Causes problems with __ctype
++ ;;
++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++ # Compiler inserts libc in the correct place for threads to work
++ ;;
++ *)
++ # Add libc to deplibs on all other systems if necessary.
++ if test "$build_libtool_need_lc" = "yes"; then
++ func_append deplibs " -lc"
++ fi
++ ;;
++ esac
++ fi
++
++ # Transform deplibs into only deplibs that can be linked in shared.
++ name_save=$name
++ libname_save=$libname
++ release_save=$release
++ versuffix_save=$versuffix
++ major_save=$major
++ # I'm not sure if I'm treating the release correctly. I think
++ # release should show up in the -l (ie -lgmp5) so we don't want to
++ # add it in twice. Is that correct?
++ release=""
++ versuffix=""
++ major=""
++ newdeplibs=
++ droppeddeps=no
++ case $deplibs_check_method in
++ pass_all)
++ # Don't check for shared/static. Everything works.
++ # This might be a little naive. We might want to check
++ # whether the library exists or not. But this is on
++ # osf3 & osf4 and I'm not really sure... Just
++ # implementing what was already the behavior.
++ newdeplibs=$deplibs
++ ;;
++ test_compile)
++ # This code stresses the "libraries are programs" paradigm to its
++ # limits. Maybe even breaks it. We compile a program, linking it
++ # against the deplibs as a proxy for the library. Then we can check
++ # whether they linked in statically or dynamically with ldd.
++ $opt_dry_run || $RM conftest.c
++ cat > conftest.c <<EOF
++ int main() { return 0; }
++EOF
++ $opt_dry_run || $RM conftest
++ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
++ ldd_output=`ldd conftest`
++ for i in $deplibs; do
++ case $i in
++ -l*)
++ func_stripname -l '' "$i"
++ name=$func_stripname_result
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $i "*)
++ func_append newdeplibs " $i"
++ i=""
++ ;;
++ esac
++ fi
++ if test -n "$i" ; then
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++ set dummy $deplib_matches; shift
++ deplib_match=$1
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ func_append newdeplibs " $i"
++ else
++ droppeddeps=yes
++ echo
++ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which I believe you do not have"
++ echo "*** because a test_compile did reveal that the linker did not use it for"
++ echo "*** its dynamic dependency list that programs get resolved with at runtime."
++ fi
++ fi
++ ;;
++ *)
++ func_append newdeplibs " $i"
++ ;;
++ esac
++ done
++ else
++ # Error occurred in the first compile. Let's try to salvage
++ # the situation: Compile a separate program for each library.
++ for i in $deplibs; do
++ case $i in
++ -l*)
++ func_stripname -l '' "$i"
++ name=$func_stripname_result
++ $opt_dry_run || $RM conftest
++ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
++ ldd_output=`ldd conftest`
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $i "*)
++ func_append newdeplibs " $i"
++ i=""
++ ;;
++ esac
++ fi
++ if test -n "$i" ; then
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
++ set dummy $deplib_matches; shift
++ deplib_match=$1
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ func_append newdeplibs " $i"
++ else
++ droppeddeps=yes
++ echo
++ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because a test_compile did reveal that the linker did not use this one"
++ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
++ fi
++ fi
++ else
++ droppeddeps=yes
++ echo
++ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
++ echo "*** make it link in! You will probably need to install it or some"
++ echo "*** library that it depends on before this library will be fully"
++ echo "*** functional. Installing it before continuing would be even better."
++ fi
++ ;;
++ *)
++ func_append newdeplibs " $i"
++ ;;
++ esac
++ done
++ fi
++ ;;
++ file_magic*)
++ set dummy $deplibs_check_method; shift
++ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++ for a_deplib in $deplibs; do
++ case $a_deplib in
++ -l*)
++ func_stripname -l '' "$a_deplib"
++ name=$func_stripname_result
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $a_deplib "*)
++ func_append newdeplibs " $a_deplib"
++ a_deplib=""
++ ;;
++ esac
++ fi
++ if test -n "$a_deplib" ; then
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ if test -n "$file_magic_glob"; then
++ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
++ else
++ libnameglob=$libname
++ fi
++ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ if test "$want_nocaseglob" = yes; then
++ shopt -s nocaseglob
++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++ $nocaseglob
++ else
++ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
++ fi
++ for potent_lib in $potential_libs; do
++ # Follow soft links.
++ if ls -lLd "$potent_lib" 2>/dev/null |
++ $GREP " -> " >/dev/null; then
++ continue
++ fi
++ # The statement above tries to avoid entering an
++ # endless loop below, in case of cyclic links.
++ # We might still enter an endless loop, since a link
++ # loop can be closed while we follow links,
++ # but so what?
++ potlib="$potent_lib"
++ while test -h "$potlib" 2>/dev/null; do
++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
++ case $potliblink in
++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
++ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
++ esac
++ done
++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
++ $SED -e 10q |
++ $EGREP "$file_magic_regex" > /dev/null; then
++ func_append newdeplibs " $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
++ done
++ fi
++ if test -n "$a_deplib" ; then
++ droppeddeps=yes
++ echo
++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because I did check the linker path looking for a file starting"
++ if test -z "$potlib" ; then
++ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
++ else
++ $ECHO "*** with $libname and none of the candidates passed a file format test"
++ $ECHO "*** using a file magic. Last file checked: $potlib"
++ fi
++ fi
++ ;;
++ *)
++ # Add a -L argument.
++ func_append newdeplibs " $a_deplib"
++ ;;
++ esac
++ done # Gone through all deplibs.
++ ;;
++ match_pattern*)
++ set dummy $deplibs_check_method; shift
++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
++ for a_deplib in $deplibs; do
++ case $a_deplib in
++ -l*)
++ func_stripname -l '' "$a_deplib"
++ name=$func_stripname_result
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ case " $predeps $postdeps " in
++ *" $a_deplib "*)
++ func_append newdeplibs " $a_deplib"
++ a_deplib=""
++ ;;
++ esac
++ fi
++ if test -n "$a_deplib" ; then
++ libname=`eval "\\$ECHO \"$libname_spec\""`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
++ potlib="$potent_lib" # see symlink-check above in file_magic test
++ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
++ $EGREP "$match_pattern_regex" > /dev/null; then
++ func_append newdeplibs " $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
++ done
++ fi
++ if test -n "$a_deplib" ; then
++ droppeddeps=yes
++ echo
++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because I did check the linker path looking for a file starting"
++ if test -z "$potlib" ; then
++ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
++ else
++ $ECHO "*** with $libname and none of the candidates passed a file format test"
++ $ECHO "*** using a regex pattern. Last file checked: $potlib"
++ fi
++ fi
++ ;;
++ *)
++ # Add a -L argument.
++ func_append newdeplibs " $a_deplib"
++ ;;
++ esac
++ done # Gone through all deplibs.
++ ;;
++ none | unknown | *)
++ newdeplibs=""
++ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++ for i in $predeps $postdeps ; do
++ # can't use Xsed below, because $i might contain '/'
++ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
++ done
++ fi
++ case $tmp_deplibs in
++ *[!\ \ ]*)
++ echo
++ if test "X$deplibs_check_method" = "Xnone"; then
++ echo "*** Warning: inter-library dependencies are not supported in this platform."
++ else
++ echo "*** Warning: inter-library dependencies are not known to be supported."
++ fi
++ echo "*** All declared inter-library dependencies are being dropped."
++ droppeddeps=yes
++ ;;
++ esac
++ ;;
++ esac
++ versuffix=$versuffix_save
++ major=$major_save
++ release=$release_save
++ libname=$libname_save
++ name=$name_save
++
++ case $host in
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # On Rhapsody replace the C library with the System framework
++ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
++ ;;
++ esac
++
++ if test "$droppeddeps" = yes; then
++ if test "$module" = yes; then
++ echo
++ echo "*** Warning: libtool could not satisfy all declared inter-library"
++ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
++ echo "*** a static module, that should work as long as the dlopening"
++ echo "*** application is linked with the -dlopen flag."
++ if test -z "$global_symbol_pipe"; then
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ fi
++ if test "$build_old_libs" = no; then
++ oldlibs="$output_objdir/$libname.$libext"
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ else
++ echo "*** The inter-library dependencies that have been dropped here will be"
++ echo "*** automatically added whenever a program is linked with this library"
++ echo "*** or is declared to -dlopen it."
++
++ if test "$allow_undefined" = no; then
++ echo
++ echo "*** Since this library must not contain undefined symbols,"
++ echo "*** because either the platform does not support them or"
++ echo "*** it was explicitly requested with -no-undefined,"
++ echo "*** libtool will only create a static version of it."
++ if test "$build_old_libs" = no; then
++ oldlibs="$output_objdir/$libname.$libext"
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ fi
++ fi
++ fi
++ # Done checking deplibs!
++ deplibs=$newdeplibs
++ fi
++ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++ case $host in
++ *-*-darwin*)
++ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ ;;
++ esac
++
++ # move library search paths that coincide with paths to not yet
++ # installed libraries to the beginning of the library search list
++ new_libs=
++ for path in $notinst_path; do
++ case " $new_libs " in
++ *" -L$path/$objdir "*) ;;
++ *)
++ case " $deplibs " in
++ *" -L$path/$objdir "*)
++ func_append new_libs " -L$path/$objdir" ;;
++ esac
++ ;;
++ esac
++ done
++ for deplib in $deplibs; do
++ case $deplib in
++ -L*)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) func_append new_libs " $deplib" ;;
++ esac
++ ;;
++ *) func_append new_libs " $deplib" ;;
++ esac
++ done
++ deplibs="$new_libs"
++
++ # All the library-specific variables (install_libdir is set above).
++ library_names=
++ old_library=
++ dlname=
++
++ # Test again, we may have decided not to build it any more
++ if test "$build_libtool_libs" = yes; then
++ # Remove ${wl} instances when linking with ld.
++ # FIXME: should test the right _cmds variable.
++ case $archive_cmds in
++ *\$LD\ *) wl= ;;
++ esac
++ if test "$hardcode_into_libs" = yes; then
++ # Hardcode the library paths
++ hardcode_libdirs=
++ dep_rpath=
++ rpath="$finalize_rpath"
++ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
++ for libdir in $rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ func_replace_sysroot "$libdir"
++ libdir=$func_replace_sysroot_result
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append dep_rpath " $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$perm_rpath " in
++ *" $libdir "*) ;;
++ *) func_append perm_rpath " $libdir" ;;
++ esac
++ fi
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
++ fi
++ if test -n "$runpath_var" && test -n "$perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $perm_rpath; do
++ func_append rpath "$dir:"
++ done
++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++ fi
++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++ fi
++
++ shlibpath="$finalize_shlibpath"
++ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++ if test -n "$shlibpath"; then
++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++ fi
++
++ # Get the real and link names of the library.
++ eval shared_ext=\"$shrext_cmds\"
++ eval library_names=\"$library_names_spec\"
++ set dummy $library_names
++ shift
++ realname="$1"
++ shift
++
++ if test -n "$soname_spec"; then
++ eval soname=\"$soname_spec\"
++ else
++ soname="$realname"
++ fi
++ if test -z "$dlname"; then
++ dlname=$soname
++ fi
++
++ lib="$output_objdir/$realname"
++ linknames=
++ for link
++ do
++ func_append linknames " $link"
++ done
++
++ # Use standard objects if they are pic
++ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
++ test "X$libobjs" = "X " && libobjs=
++
++ delfiles=
++ if test -n "$export_symbols" && test -n "$include_expsyms"; then
++ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
++ export_symbols="$output_objdir/$libname.uexp"
++ func_append delfiles " $export_symbols"
++ fi
++
++ orig_export_symbols=
++ case $host_os in
++ cygwin* | mingw* | cegcc*)
++ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
++ # exporting using user supplied symfile
++ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
++ # and it's NOT already a .def file. Must figure out
++ # which of the given symbols are data symbols and tag
++ # them as such. So, trigger use of export_symbols_cmds.
++ # export_symbols gets reassigned inside the "prepare
++ # the list of exported symbols" if statement, so the
++ # include_expsyms logic still works.
++ orig_export_symbols="$export_symbols"
++ export_symbols=
++ always_export_symbols=yes
++ fi
++ fi
++ ;;
++ esac
++
++ # Prepare the list of exported symbols
++ if test -z "$export_symbols"; then
++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
++ func_verbose "generating symbol list for \`$libname.la'"
++ export_symbols="$output_objdir/$libname.exp"
++ $opt_dry_run || $RM $export_symbols
++ cmds=$export_symbols_cmds
++ save_ifs="$IFS"; IFS='~'
++ for cmd1 in $cmds; do
++ IFS="$save_ifs"
++ # Take the normal branch if the nm_file_list_spec branch
++ # doesn't work or if tool conversion is not needed.
++ case $nm_file_list_spec~$to_tool_file_cmd in
++ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
++ try_normal_branch=yes
++ eval cmd=\"$cmd1\"
++ func_len " $cmd"
++ len=$func_len_result
++ ;;
++ *)
++ try_normal_branch=no
++ ;;
++ esac
++ if test "$try_normal_branch" = yes \
++ && { test "$len" -lt "$max_cmd_len" \
++ || test "$max_cmd_len" -le -1; }
++ then
++ func_show_eval "$cmd" 'exit $?'
++ skipped_export=false
++ elif test -n "$nm_file_list_spec"; then
++ func_basename "$output"
++ output_la=$func_basename_result
++ save_libobjs=$libobjs
++ save_output=$output
++ output=${output_objdir}/${output_la}.nm
++ func_to_tool_file "$output"
++ libobjs=$nm_file_list_spec$func_to_tool_file_result
++ func_append delfiles " $output"
++ func_verbose "creating $NM input file list: $output"
++ for obj in $save_libobjs; do
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result"
++ done > "$output"
++ eval cmd=\"$cmd1\"
++ func_show_eval "$cmd" 'exit $?'
++ output=$save_output
++ libobjs=$save_libobjs
++ skipped_export=false
++ else
++ # The command line is too long to execute in one step.
++ func_verbose "using reloadable object file for export list..."
++ skipped_export=:
++ # Break out early, otherwise skipped_export may be
++ # set to false by a later but shorter cmd.
++ break
++ fi
++ done
++ IFS="$save_ifs"
++ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++ fi
++ fi
++ fi
++
++ if test -n "$export_symbols" && test -n "$include_expsyms"; then
++ tmp_export_symbols="$export_symbols"
++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
++ fi
++
++ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
++ # The given exports_symbols file has to be filtered, so filter it.
++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
++ # FIXME: $output_objdir/$libname.filter potentially contains lots of
++ # 's' commands which not all seds can handle. GNU sed should be fine
++ # though. Also, the filter scales superlinearly with the number of
++ # global variables. join(1) would be nice here, but unfortunately
++ # isn't a blessed tool.
++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
++ export_symbols=$output_objdir/$libname.def
++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
++ fi
++
++ tmp_deplibs=
++ for test_deplib in $deplibs; do
++ case " $convenience " in
++ *" $test_deplib "*) ;;
++ *)
++ func_append tmp_deplibs " $test_deplib"
++ ;;
++ esac
++ done
++ deplibs="$tmp_deplibs"
++
++ if test -n "$convenience"; then
++ if test -n "$whole_archive_flag_spec" &&
++ test "$compiler_needs_object" = yes &&
++ test -z "$libobjs"; then
++ # extract the archives, so we have objects to list.
++ # TODO: could optimize this to just extract one archive.
++ whole_archive_flag_spec=
++ fi
++ if test -n "$whole_archive_flag_spec"; then
++ save_libobjs=$libobjs
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++ test "X$libobjs" = "X " && libobjs=
++ else
++ gentop="$output_objdir/${outputname}x"
++ func_append generated " $gentop"
++
++ func_extract_archives $gentop $convenience
++ func_append libobjs " $func_extract_archives_result"
++ test "X$libobjs" = "X " && libobjs=
++ fi
++ fi
++
++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
++ eval flag=\"$thread_safe_flag_spec\"
++ func_append linker_flags " $flag"
++ fi
++
++ # Make a backup of the uninstalled library when relinking
++ if test "$opt_mode" = relink; then
++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
++ fi
++
++ # Do each of the archive commands.
++ if test "$module" = yes && test -n "$module_cmds" ; then
++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++ eval test_cmds=\"$module_expsym_cmds\"
++ cmds=$module_expsym_cmds
++ else
++ eval test_cmds=\"$module_cmds\"
++ cmds=$module_cmds
++ fi
++ else
++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++ eval test_cmds=\"$archive_expsym_cmds\"
++ cmds=$archive_expsym_cmds
++ else
++ eval test_cmds=\"$archive_cmds\"
++ cmds=$archive_cmds
++ fi
++ fi
++
++ if test "X$skipped_export" != "X:" &&
++ func_len " $test_cmds" &&
++ len=$func_len_result &&
++ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++ :
++ else
++ # The command line is too long to link in one step, link piecewise
++ # or, if using GNU ld and skipped_export is not :, use a linker
++ # script.
++
++ # Save the value of $output and $libobjs because we want to
++ # use them later. If we have whole_archive_flag_spec, we
++ # want to use save_libobjs as it was before
++ # whole_archive_flag_spec was expanded, because we can't
++ # assume the linker understands whole_archive_flag_spec.
++ # This may have to be revisited, in case too many
++ # convenience libraries get linked in and end up exceeding
++ # the spec.
++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
++ save_libobjs=$libobjs
++ fi
++ save_output=$output
++ func_basename "$output"
++ output_la=$func_basename_result
++
++ # Clear the reloadable object creation command queue and
++ # initialize k to one.
++ test_cmds=
++ concat_cmds=
++ objlist=
++ last_robj=
++ k=1
++
++ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
++ output=${output_objdir}/${output_la}.lnkscript
++ func_verbose "creating GNU ld script: $output"
++ echo 'INPUT (' > $output
++ for obj in $save_libobjs
++ do
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result" >> $output
++ done
++ echo ')' >> $output
++ func_append delfiles " $output"
++ func_to_tool_file "$output"
++ output=$func_to_tool_file_result
++ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
++ output=${output_objdir}/${output_la}.lnk
++ func_verbose "creating linker input file list: $output"
++ : > $output
++ set x $save_libobjs
++ shift
++ firstobj=
++ if test "$compiler_needs_object" = yes; then
++ firstobj="$1 "
++ shift
++ fi
++ for obj
++ do
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result" >> $output
++ done
++ func_append delfiles " $output"
++ func_to_tool_file "$output"
++ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
++ else
++ if test -n "$save_libobjs"; then
++ func_verbose "creating reloadable object files..."
++ output=$output_objdir/$output_la-${k}.$objext
++ eval test_cmds=\"$reload_cmds\"
++ func_len " $test_cmds"
++ len0=$func_len_result
++ len=$len0
++
++ # Loop over the list of objects to be linked.
++ for obj in $save_libobjs
++ do
++ func_len " $obj"
++ func_arith $len + $func_len_result
++ len=$func_arith_result
++ if test "X$objlist" = X ||
++ test "$len" -lt "$max_cmd_len"; then
++ func_append objlist " $obj"
++ else
++ # The command $test_cmds is almost too long, add a
++ # command to the queue.
++ if test "$k" -eq 1 ; then
++ # The first file doesn't have a previous command to add.
++ reload_objs=$objlist
++ eval concat_cmds=\"$reload_cmds\"
++ else
++ # All subsequent reloadable object files will link in
++ # the last one created.
++ reload_objs="$objlist $last_robj"
++ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
++ fi
++ last_robj=$output_objdir/$output_la-${k}.$objext
++ func_arith $k + 1
++ k=$func_arith_result
++ output=$output_objdir/$output_la-${k}.$objext
++ objlist=" $obj"
++ func_len " $last_robj"
++ func_arith $len0 + $func_len_result
++ len=$func_arith_result
++ fi
++ done
++ # Handle the remaining objects by creating one last
++ # reloadable object file. All subsequent reloadable object
++ # files will link in the last one created.
++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++ reload_objs="$objlist $last_robj"
++ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
++ if test -n "$last_robj"; then
++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
++ fi
++ func_append delfiles " $output"
++
++ else
++ output=
++ fi
++
++ if ${skipped_export-false}; then
++ func_verbose "generating symbol list for \`$libname.la'"
++ export_symbols="$output_objdir/$libname.exp"
++ $opt_dry_run || $RM $export_symbols
++ libobjs=$output
++ # Append the command to create the export file.
++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
++ if test -n "$last_robj"; then
++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
++ fi
++ fi
++
++ test -n "$save_libobjs" &&
++ func_verbose "creating a temporary reloadable object file: $output"
++
++ # Loop through the commands generated above and execute them.
++ save_ifs="$IFS"; IFS='~'
++ for cmd in $concat_cmds; do
++ IFS="$save_ifs"
++ $opt_silent || {
++ func_quote_for_expand "$cmd"
++ eval "func_echo $func_quote_for_expand_result"
++ }
++ $opt_dry_run || eval "$cmd" || {
++ lt_exit=$?
++
++ # Restore the uninstalled library and exit
++ if test "$opt_mode" = relink; then
++ ( cd "$output_objdir" && \
++ $RM "${realname}T" && \
++ $MV "${realname}U" "$realname" )
++ fi
++
++ exit $lt_exit
++ }
++ done
++ IFS="$save_ifs"
++
++ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
++ fi
++ fi
++
++ if ${skipped_export-false}; then
++ if test -n "$export_symbols" && test -n "$include_expsyms"; then
++ tmp_export_symbols="$export_symbols"
++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
++ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
++ fi
++
++ if test -n "$orig_export_symbols"; then
++ # The given exports_symbols file has to be filtered, so filter it.
++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
++ # FIXME: $output_objdir/$libname.filter potentially contains lots of
++ # 's' commands which not all seds can handle. GNU sed should be fine
++ # though. Also, the filter scales superlinearly with the number of
++ # global variables. join(1) would be nice here, but unfortunately
++ # isn't a blessed tool.
++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
++ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
++ export_symbols=$output_objdir/$libname.def
++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
++ fi
++ fi
++
++ libobjs=$output
++ # Restore the value of output.
++ output=$save_output
++
++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++ test "X$libobjs" = "X " && libobjs=
++ fi
++ # Expand the library linking commands again to reset the
++ # value of $libobjs for piecewise linking.
++
++ # Do each of the archive commands.
++ if test "$module" = yes && test -n "$module_cmds" ; then
++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++ cmds=$module_expsym_cmds
++ else
++ cmds=$module_cmds
++ fi
++ else
++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++ cmds=$archive_expsym_cmds
++ else
++ cmds=$archive_cmds
++ fi
++ fi
++ fi
++
++ if test -n "$delfiles"; then
++ # Append the command to remove temporary files to $cmds.
++ eval cmds=\"\$cmds~\$RM $delfiles\"
++ fi
++
++ # Add any objects from preloaded convenience libraries
++ if test -n "$dlprefiles"; then
++ gentop="$output_objdir/${outputname}x"
++ func_append generated " $gentop"
++
++ func_extract_archives $gentop $dlprefiles
++ func_append libobjs " $func_extract_archives_result"
++ test "X$libobjs" = "X " && libobjs=
++ fi
++
++ save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ eval cmd=\"$cmd\"
++ $opt_silent || {
++ func_quote_for_expand "$cmd"
++ eval "func_echo $func_quote_for_expand_result"
++ }
++ $opt_dry_run || eval "$cmd" || {
++ lt_exit=$?
++
++ # Restore the uninstalled library and exit
++ if test "$opt_mode" = relink; then
++ ( cd "$output_objdir" && \
++ $RM "${realname}T" && \
++ $MV "${realname}U" "$realname" )
++ fi
++
++ exit $lt_exit
++ }
++ done
++ IFS="$save_ifs"
++
++ # Restore the uninstalled library and exit
++ if test "$opt_mode" = relink; then
++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
++
++ if test -n "$convenience"; then
++ if test -z "$whole_archive_flag_spec"; then
++ func_show_eval '${RM}r "$gentop"'
++ fi
++ fi
++
++ exit $EXIT_SUCCESS
++ fi
++
++ # Create links to the real library.
++ for linkname in $linknames; do
++ if test "$realname" != "$linkname"; then
++ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
++ fi
++ done
++
++ # If -module or -export-dynamic was specified, set the dlname.
++ if test "$module" = yes || test "$export_dynamic" = yes; then
++ # On all known operating systems, these are identical.
++ dlname="$soname"
++ fi
++ fi
++ ;;
++
++ obj)
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ func_warning "\`-dlopen' is ignored for objects"
++ fi
++
++ case " $deplibs" in
++ *\ -l* | *\ -L*)
++ func_warning "\`-l' and \`-L' are ignored for objects" ;;
++ esac
++
++ test -n "$rpath" && \
++ func_warning "\`-rpath' is ignored for objects"
++
++ test -n "$xrpath" && \
++ func_warning "\`-R' is ignored for objects"
++
++ test -n "$vinfo" && \
++ func_warning "\`-version-info' is ignored for objects"
++
++ test -n "$release" && \
++ func_warning "\`-release' is ignored for objects"
++
++ case $output in
++ *.lo)
++ test -n "$objs$old_deplibs" && \
++ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
++
++ libobj=$output
++ func_lo2o "$libobj"
++ obj=$func_lo2o_result
++ ;;
++ *)
++ libobj=
++ obj="$output"
++ ;;
++ esac
++
++ # Delete the old objects.
++ $opt_dry_run || $RM $obj $libobj
++
++ # Objects from convenience libraries. This assumes
++ # single-version convenience libraries. Whenever we create
++ # different ones for PIC/non-PIC, this we'll have to duplicate
++ # the extraction.
++ reload_conv_objs=
++ gentop=
++ # reload_cmds runs $LD directly, so let us get rid of
++ # -Wl from whole_archive_flag_spec and hope we can get by with
++ # turning comma into space..
++ wl=
++
++ if test -n "$convenience"; then
++ if test -n "$whole_archive_flag_spec"; then
++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
++ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
++ else
++ gentop="$output_objdir/${obj}x"
++ func_append generated " $gentop"
++
++ func_extract_archives $gentop $convenience
++ reload_conv_objs="$reload_objs $func_extract_archives_result"
++ fi
++ fi
++
++ # If we're not building shared, we need to use non_pic_objs
++ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
++
++ # Create the old-style object.
++ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++
++ output="$obj"
++ func_execute_cmds "$reload_cmds" 'exit $?'
++
++ # Exit if we aren't doing a library object file.
++ if test -z "$libobj"; then
++ if test -n "$gentop"; then
++ func_show_eval '${RM}r "$gentop"'
++ fi
++
++ exit $EXIT_SUCCESS
++ fi
++
++ if test "$build_libtool_libs" != yes; then
++ if test -n "$gentop"; then
++ func_show_eval '${RM}r "$gentop"'
++ fi
++
++ # Create an invalid libtool object if no PIC, so that we don't
++ # accidentally link it into a program.
++ # $show "echo timestamp > $libobj"
++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
++ exit $EXIT_SUCCESS
++ fi
++
++ if test -n "$pic_flag" || test "$pic_mode" != default; then
++ # Only do commands if we really have different PIC objects.
++ reload_objs="$libobjs $reload_conv_objs"
++ output="$libobj"
++ func_execute_cmds "$reload_cmds" 'exit $?'
++ fi
++
++ if test -n "$gentop"; then
++ func_show_eval '${RM}r "$gentop"'
++ fi
++
++ exit $EXIT_SUCCESS
++ ;;
++
++ prog)
++ case $host in
++ *cygwin*) func_stripname '' '.exe' "$output"
++ output=$func_stripname_result.exe;;
++ esac
++ test -n "$vinfo" && \
++ func_warning "\`-version-info' is ignored for programs"
++
++ test -n "$release" && \
++ func_warning "\`-release' is ignored for programs"
++
++ test "$preload" = yes \
++ && test "$dlopen_support" = unknown \
++ && test "$dlopen_self" = unknown \
++ && test "$dlopen_self_static" = unknown && \
++ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
++
++ case $host in
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # On Rhapsody replace the C library is the System framework
++ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
++ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
++ ;;
++ esac
++
++ case $host in
++ *-*-darwin*)
++ # Don't allow lazy linking, it breaks C++ global constructors
++ # But is supposedly fixed on 10.4 or later (yay!).
++ if test "$tagname" = CXX ; then
++ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
++ 10.[0123])
++ func_append compile_command " ${wl}-bind_at_load"
++ func_append finalize_command " ${wl}-bind_at_load"
++ ;;
++ esac
++ fi
++ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
++ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
++ ;;
++ esac
++
++
++ # move library search paths that coincide with paths to not yet
++ # installed libraries to the beginning of the library search list
++ new_libs=
++ for path in $notinst_path; do
++ case " $new_libs " in
++ *" -L$path/$objdir "*) ;;
++ *)
++ case " $compile_deplibs " in
++ *" -L$path/$objdir "*)
++ func_append new_libs " -L$path/$objdir" ;;
++ esac
++ ;;
++ esac
++ done
++ for deplib in $compile_deplibs; do
++ case $deplib in
++ -L*)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) func_append new_libs " $deplib" ;;
++ esac
++ ;;
++ *) func_append new_libs " $deplib" ;;
++ esac
++ done
++ compile_deplibs="$new_libs"
++
++
++ func_append compile_command " $compile_deplibs"
++ func_append finalize_command " $finalize_deplibs"
++
++ if test -n "$rpath$xrpath"; then
++ # If the user specified any rpath flags, then add them.
++ for libdir in $rpath $xrpath; do
++ # This is the magic to use -rpath.
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) func_append finalize_rpath " $libdir" ;;
++ esac
++ done
++ fi
++
++ # Now hardcode the library paths
++ rpath=
++ hardcode_libdirs=
++ for libdir in $compile_rpath $finalize_rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append rpath " $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$perm_rpath " in
++ *" $libdir "*) ;;
++ *) func_append perm_rpath " $libdir" ;;
++ esac
++ fi
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
++ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
++ case :$dllsearchpath: in
++ *":$libdir:"*) ;;
++ ::) dllsearchpath=$libdir;;
++ *) func_append dllsearchpath ":$libdir";;
++ esac
++ case :$dllsearchpath: in
++ *":$testbindir:"*) ;;
++ ::) dllsearchpath=$testbindir;;
++ *) func_append dllsearchpath ":$testbindir";;
++ esac
++ ;;
++ esac
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval rpath=\" $hardcode_libdir_flag_spec\"
++ fi
++ compile_rpath="$rpath"
++
++ rpath=
++ hardcode_libdirs=
++ for libdir in $finalize_rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append rpath " $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$finalize_perm_rpath " in
++ *" $libdir "*) ;;
++ *) func_append finalize_perm_rpath " $libdir" ;;
++ esac
++ fi
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval rpath=\" $hardcode_libdir_flag_spec\"
++ fi
++ finalize_rpath="$rpath"
++
++ if test -n "$libobjs" && test "$build_old_libs" = yes; then
++ # Transform all the library objects into standard objects.
++ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
++ fi
++
++ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
++
++ # template prelinking step
++ if test -n "$prelink_cmds"; then
++ func_execute_cmds "$prelink_cmds" 'exit $?'
++ fi
++
++ wrappers_required=yes
++ case $host in
++ *cegcc* | *mingw32ce*)
++ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
++ wrappers_required=no
++ ;;
++ *cygwin* | *mingw* )
++ if test "$build_libtool_libs" != yes; then
++ wrappers_required=no
++ fi
++ ;;
++ *)
++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
++ wrappers_required=no
++ fi
++ ;;
++ esac
++ if test "$wrappers_required" = no; then
++ # Replace the output file specification.
++ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
++ link_command="$compile_command$compile_rpath"
++
++ # We have no uninstalled library dependencies, so finalize right now.
++ exit_status=0
++ func_show_eval "$link_command" 'exit_status=$?'
++
++ if test -n "$postlink_cmds"; then
++ func_to_tool_file "$output"
++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++ func_execute_cmds "$postlink_cmds" 'exit $?'
++ fi
++
++ # Delete the generated files.
++ if test -f "$output_objdir/${outputname}S.${objext}"; then
++ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
++ fi
++
++ exit $exit_status
++ fi
++
++ if test -n "$compile_shlibpath$finalize_shlibpath"; then
++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
++ fi
++ if test -n "$finalize_shlibpath"; then
++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
++ fi
++
++ compile_var=
++ finalize_var=
++ if test -n "$runpath_var"; then
++ if test -n "$perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $perm_rpath; do
++ func_append rpath "$dir:"
++ done
++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
++ fi
++ if test -n "$finalize_perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $finalize_perm_rpath; do
++ func_append rpath "$dir:"
++ done
++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
++ fi
++ fi
++
++ if test "$no_install" = yes; then
++ # We don't need to create a wrapper script.
++ link_command="$compile_var$compile_command$compile_rpath"
++ # Replace the output file specification.
++ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
++ # Delete the old output file.
++ $opt_dry_run || $RM $output
++ # Link the executable and exit
++ func_show_eval "$link_command" 'exit $?'
++
++ if test -n "$postlink_cmds"; then
++ func_to_tool_file "$output"
++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++ func_execute_cmds "$postlink_cmds" 'exit $?'
++ fi
++
++ exit $EXIT_SUCCESS
++ fi
++
++ if test "$hardcode_action" = relink; then
++ # Fast installation is not supported
++ link_command="$compile_var$compile_command$compile_rpath"
++ relink_command="$finalize_var$finalize_command$finalize_rpath"
++
++ func_warning "this platform does not like uninstalled shared libraries"
++ func_warning "\`$output' will be relinked during installation"
++ else
++ if test "$fast_install" != no; then
++ link_command="$finalize_var$compile_command$finalize_rpath"
++ if test "$fast_install" = yes; then
++ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
++ else
++ # fast_install is set to needless
++ relink_command=
++ fi
++ else
++ link_command="$compile_var$compile_command$compile_rpath"
++ relink_command="$finalize_var$finalize_command$finalize_rpath"
++ fi
++ fi
++
++ # Replace the output file specification.
++ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
++
++ # Delete the old output files.
++ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
++
++ func_show_eval "$link_command" 'exit $?'
++
++ if test -n "$postlink_cmds"; then
++ func_to_tool_file "$output_objdir/$outputname"
++ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
++ func_execute_cmds "$postlink_cmds" 'exit $?'
++ fi
++
++ # Now create the wrapper script.
++ func_verbose "creating $output"
++
++ # Quote the relink command for shipping.
++ if test -n "$relink_command"; then
++ # Preserve any variables that may affect compiler behavior
++ for var in $variables_saved_for_relink; do
++ if eval test -z \"\${$var+set}\"; then
++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++ elif eval var_value=\$$var; test -z "$var_value"; then
++ relink_command="$var=; export $var; $relink_command"
++ else
++ func_quote_for_eval "$var_value"
++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
++ fi
++ done
++ relink_command="(cd `pwd`; $relink_command)"
++ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
++ fi
++
++ # Only actually do things if not in dry run mode.
++ $opt_dry_run || {
++ # win32 will think the script is a binary if it has
++ # a .exe suffix, so we strip it off here.
++ case $output in
++ *.exe) func_stripname '' '.exe' "$output"
++ output=$func_stripname_result ;;
++ esac
++ # test for cygwin because mv fails w/o .exe extensions
++ case $host in
++ *cygwin*)
++ exeext=.exe
++ func_stripname '' '.exe' "$outputname"
++ outputname=$func_stripname_result ;;
++ *) exeext= ;;
++ esac
++ case $host in
++ *cygwin* | *mingw* )
++ func_dirname_and_basename "$output" "" "."
++ output_name=$func_basename_result
++ output_path=$func_dirname_result
++ cwrappersource="$output_path/$objdir/lt-$output_name.c"
++ cwrapper="$output_path/$output_name.exe"
++ $RM $cwrappersource $cwrapper
++ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
++
++ func_emit_cwrapperexe_src > $cwrappersource
++
++ # The wrapper executable is built using the $host compiler,
++ # because it contains $host paths and files. If cross-
++ # compiling, it, like the target executable, must be
++ # executed on the $host or under an emulation environment.
++ $opt_dry_run || {
++ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
++ $STRIP $cwrapper
++ }
++
++ # Now, create the wrapper script for func_source use:
++ func_ltwrapper_scriptname $cwrapper
++ $RM $func_ltwrapper_scriptname_result
++ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
++ $opt_dry_run || {
++ # note: this script will not be executed, so do not chmod.
++ if test "x$build" = "x$host" ; then
++ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
++ else
++ func_emit_wrapper no > $func_ltwrapper_scriptname_result
++ fi
++ }
++ ;;
++ * )
++ $RM $output
++ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
++
++ func_emit_wrapper no > $output
++ chmod +x $output
++ ;;
++ esac
++ }
++ exit $EXIT_SUCCESS
++ ;;
++ esac
++
++ # See if we need to build an old-fashioned archive.
++ for oldlib in $oldlibs; do
++
++ if test "$build_libtool_libs" = convenience; then
++ oldobjs="$libobjs_save $symfileobj"
++ addlibs="$convenience"
++ build_libtool_libs=no
++ else
++ if test "$build_libtool_libs" = module; then
++ oldobjs="$libobjs_save"
++ build_libtool_libs=no
++ else
++ oldobjs="$old_deplibs $non_pic_objects"
++ if test "$preload" = yes && test -f "$symfileobj"; then
++ func_append oldobjs " $symfileobj"
++ fi
++ fi
++ addlibs="$old_convenience"
++ fi
++
++ if test -n "$addlibs"; then
++ gentop="$output_objdir/${outputname}x"
++ func_append generated " $gentop"
++
++ func_extract_archives $gentop $addlibs
++ func_append oldobjs " $func_extract_archives_result"
++ fi
++
++ # Do each command in the archive commands.
++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
++ cmds=$old_archive_from_new_cmds
++ else
++
++ # Add any objects from preloaded convenience libraries
++ if test -n "$dlprefiles"; then
++ gentop="$output_objdir/${outputname}x"
++ func_append generated " $gentop"
++
++ func_extract_archives $gentop $dlprefiles
++ func_append oldobjs " $func_extract_archives_result"
++ fi
++
++ # POSIX demands no paths to be encoded in archives. We have
++ # to avoid creating archives with duplicate basenames if we
++ # might have to extract them afterwards, e.g., when creating a
++ # static archive out of a convenience library, or when linking
++ # the entirety of a libtool archive into another (currently
++ # not supported by libtool).
++ if (for obj in $oldobjs
++ do
++ func_basename "$obj"
++ $ECHO "$func_basename_result"
++ done | sort | sort -uc >/dev/null 2>&1); then
++ :
++ else
++ echo "copying selected object files to avoid basename conflicts..."
++ gentop="$output_objdir/${outputname}x"
++ func_append generated " $gentop"
++ func_mkdir_p "$gentop"
++ save_oldobjs=$oldobjs
++ oldobjs=
++ counter=1
++ for obj in $save_oldobjs
++ do
++ func_basename "$obj"
++ objbase="$func_basename_result"
++ case " $oldobjs " in
++ " ") oldobjs=$obj ;;
++ *[\ /]"$objbase "*)
++ while :; do
++ # Make sure we don't pick an alternate name that also
++ # overlaps.
++ newobj=lt$counter-$objbase
++ func_arith $counter + 1
++ counter=$func_arith_result
++ case " $oldobjs " in
++ *[\ /]"$newobj "*) ;;
++ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
++ esac
++ done
++ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
++ func_append oldobjs " $gentop/$newobj"
++ ;;
++ *) func_append oldobjs " $obj" ;;
++ esac
++ done
++ fi
++ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
++ tool_oldlib=$func_to_tool_file_result
++ eval cmds=\"$old_archive_cmds\"
++
++ func_len " $cmds"
++ len=$func_len_result
++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++ cmds=$old_archive_cmds
++ elif test -n "$archiver_list_spec"; then
++ func_verbose "using command file archive linking..."
++ for obj in $oldobjs
++ do
++ func_to_tool_file "$obj"
++ $ECHO "$func_to_tool_file_result"
++ done > $output_objdir/$libname.libcmd
++ func_to_tool_file "$output_objdir/$libname.libcmd"
++ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
++ cmds=$old_archive_cmds
++ else
++ # the command line is too long to link in one step, link in parts
++ func_verbose "using piecewise archive linking..."
++ save_RANLIB=$RANLIB
++ RANLIB=:
++ objlist=
++ concat_cmds=
++ save_oldobjs=$oldobjs
++ oldobjs=
++ # Is there a better way of finding the last object in the list?
++ for obj in $save_oldobjs
++ do
++ last_oldobj=$obj
++ done
++ eval test_cmds=\"$old_archive_cmds\"
++ func_len " $test_cmds"
++ len0=$func_len_result
++ len=$len0
++ for obj in $save_oldobjs
++ do
++ func_len " $obj"
++ func_arith $len + $func_len_result
++ len=$func_arith_result
++ func_append objlist " $obj"
++ if test "$len" -lt "$max_cmd_len"; then
++ :
++ else
++ # the above command should be used before it gets too long
++ oldobjs=$objlist
++ if test "$obj" = "$last_oldobj" ; then
++ RANLIB=$save_RANLIB
++ fi
++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
++ objlist=
++ len=$len0
++ fi
++ done
++ RANLIB=$save_RANLIB
++ oldobjs=$objlist
++ if test "X$oldobjs" = "X" ; then
++ eval cmds=\"\$concat_cmds\"
++ else
++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
++ fi
++ fi
++ fi
++ func_execute_cmds "$cmds" 'exit $?'
++ done
++
++ test -n "$generated" && \
++ func_show_eval "${RM}r$generated"
++
++ # Now create the libtool archive.
++ case $output in
++ *.la)
++ old_library=
++ test "$build_old_libs" = yes && old_library="$libname.$libext"
++ func_verbose "creating $output"
++
++ # Preserve any variables that may affect compiler behavior
++ for var in $variables_saved_for_relink; do
++ if eval test -z \"\${$var+set}\"; then
++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
++ elif eval var_value=\$$var; test -z "$var_value"; then
++ relink_command="$var=; export $var; $relink_command"
++ else
++ func_quote_for_eval "$var_value"
++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
++ fi
++ done
++ # Quote the link command for shipping.
++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
++ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
++ if test "$hardcode_automatic" = yes ; then
++ relink_command=
++ fi
++
++ # Only create the output if not a dry run.
++ $opt_dry_run || {
++ for installed in no yes; do
++ if test "$installed" = yes; then
++ if test -z "$install_libdir"; then
++ break
++ fi
++ output="$output_objdir/$outputname"i
++ # Replace all uninstalled libtool libraries with the installed ones
++ newdependency_libs=
++ for deplib in $dependency_libs; do
++ case $deplib in
++ *.la)
++ func_basename "$deplib"
++ name="$func_basename_result"
++ func_resolve_sysroot "$deplib"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
++ test -z "$libdir" && \
++ func_fatal_error "\`$deplib' is not a valid libtool archive"
++ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
++ ;;
++ -L*)
++ func_stripname -L '' "$deplib"
++ func_replace_sysroot "$func_stripname_result"
++ func_append newdependency_libs " -L$func_replace_sysroot_result"
++ ;;
++ -R*)
++ func_stripname -R '' "$deplib"
++ func_replace_sysroot "$func_stripname_result"
++ func_append newdependency_libs " -R$func_replace_sysroot_result"
++ ;;
++ *) func_append newdependency_libs " $deplib" ;;
++ esac
++ done
++ dependency_libs="$newdependency_libs"
++ newdlfiles=
++
++ for lib in $dlfiles; do
++ case $lib in
++ *.la)
++ func_basename "$lib"
++ name="$func_basename_result"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ test -z "$libdir" && \
++ func_fatal_error "\`$lib' is not a valid libtool archive"
++ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
++ ;;
++ *) func_append newdlfiles " $lib" ;;
++ esac
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ case $lib in
++ *.la)
++ # Only pass preopened files to the pseudo-archive (for
++ # eventual linking with the app. that links it) if we
++ # didn't already link the preopened objects directly into
++ # the library:
++ func_basename "$lib"
++ name="$func_basename_result"
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ test -z "$libdir" && \
++ func_fatal_error "\`$lib' is not a valid libtool archive"
++ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
++ ;;
++ esac
++ done
++ dlprefiles="$newdlprefiles"
++ else
++ newdlfiles=
++ for lib in $dlfiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ func_append newdlfiles " $abs"
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ case $lib in
++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++ *) abs=`pwd`"/$lib" ;;
++ esac
++ func_append newdlprefiles " $abs"
++ done
++ dlprefiles="$newdlprefiles"
++ fi
++ $RM $output
++ # place dlname in correct position for cygwin
++ # In fact, it would be nice if we could use this code for all target
++ # systems that can't hard-code library paths into their executables
++ # and that have no shared library path variable independent of PATH,
++ # but it turns out we can't easily determine that from inspecting
++ # libtool variables, so we have to hard-code the OSs to which it
++ # applies here; at the moment, that means platforms that use the PE
++ # object format with DLL files. See the long comment at the top of
++ # tests/bindir.at for full details.
++ tdlname=$dlname
++ case $host,$output,$installed,$module,$dlname in
++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
++ # If a -bindir argument was supplied, place the dll there.
++ if test "x$bindir" != x ;
++ then
++ func_relative_path "$install_libdir" "$bindir"
++ tdlname=$func_relative_path_result$dlname
++ else
++ # Otherwise fall back on heuristic.
++ tdlname=../bin/$dlname
++ fi
++ ;;
++ esac
++ $ECHO > $output "\
++# $outputname - a libtool library file
++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# The name that we can dlopen(3).
++dlname='$tdlname'
++
++# Names of this library.
++library_names='$library_names'
++
++# The name of the static archive.
++old_library='$old_library'
++
++# Linker flags that can not go in dependency_libs.
++inherited_linker_flags='$new_inherited_linker_flags'
++
++# Libraries that this one depends upon.
++dependency_libs='$dependency_libs'
++
++# Names of additional weak libraries provided by this library
++weak_library_names='$weak_libs'
++
++# Version information for $libname.
++current=$current
++age=$age
++revision=$revision
++
++# Is this an already installed library?
++installed=$installed
++
++# Should we warn about portability when linking against -modules?
++shouldnotlink=$module
++
++# Files to dlopen/dlpreopen
++dlopen='$dlfiles'
++dlpreopen='$dlprefiles'
++
++# Directory that this library needs to be installed in:
++libdir='$install_libdir'"
++ if test "$installed" = no && test "$need_relink" = yes; then
++ $ECHO >> $output "\
++relink_command=\"$relink_command\""
++ fi
++ done
++ }
++
++ # Do a symbolic link so that the libtool archive can be found in
++ # LD_LIBRARY_PATH before the program is installed.
++ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
++ ;;
++ esac
++ exit $EXIT_SUCCESS
++}
++
++{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
++ func_mode_link ${1+"$@"}
++
++
++# func_mode_uninstall arg...
++func_mode_uninstall ()
++{
++ $opt_debug
++ RM="$nonopt"
++ files=
++ rmforce=
++ exit_status=0
++
++ # This variable tells wrapper scripts just to set variables rather
++ # than running their programs.
++ libtool_install_magic="$magic"
++
++ for arg
++ do
++ case $arg in
++ -f) func_append RM " $arg"; rmforce=yes ;;
++ -*) func_append RM " $arg" ;;
++ *) func_append files " $arg" ;;
++ esac
++ done
++
++ test -z "$RM" && \
++ func_fatal_help "you must specify an RM program"
++
++ rmdirs=
++
++ for file in $files; do
++ func_dirname "$file" "" "."
++ dir="$func_dirname_result"
++ if test "X$dir" = X.; then
++ odir="$objdir"
++ else
++ odir="$dir/$objdir"
++ fi
++ func_basename "$file"
++ name="$func_basename_result"
++ test "$opt_mode" = uninstall && odir="$dir"
++
++ # Remember odir for removal later, being careful to avoid duplicates
++ if test "$opt_mode" = clean; then
++ case " $rmdirs " in
++ *" $odir "*) ;;
++ *) func_append rmdirs " $odir" ;;
++ esac
++ fi
++
++ # Don't error if the file doesn't exist and rm -f was used.
++ if { test -L "$file"; } >/dev/null 2>&1 ||
++ { test -h "$file"; } >/dev/null 2>&1 ||
++ test -f "$file"; then
++ :
++ elif test -d "$file"; then
++ exit_status=1
++ continue
++ elif test "$rmforce" = yes; then
++ continue
++ fi
++
++ rmfiles="$file"
++
++ case $name in
++ *.la)
++ # Possibly a libtool archive, so verify it.
++ if func_lalib_p "$file"; then
++ func_source $dir/$name
++
++ # Delete the libtool libraries and symlinks.
++ for n in $library_names; do
++ func_append rmfiles " $odir/$n"
++ done
++ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
++
++ case "$opt_mode" in
++ clean)
++ case " $library_names " in
++ *" $dlname "*) ;;
++ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
++ esac
++ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
++ ;;
++ uninstall)
++ if test -n "$library_names"; then
++ # Do each command in the postuninstall commands.
++ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
++ fi
++
++ if test -n "$old_library"; then
++ # Do each command in the old_postuninstall commands.
++ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
++ fi
++ # FIXME: should reinstall the best remaining shared library.
++ ;;
++ esac
++ fi
++ ;;
++
++ *.lo)
++ # Possibly a libtool object, so verify it.
++ if func_lalib_p "$file"; then
++
++ # Read the .lo file
++ func_source $dir/$name
++
++ # Add PIC object to the list of files to remove.
++ if test -n "$pic_object" &&
++ test "$pic_object" != none; then
++ func_append rmfiles " $dir/$pic_object"
++ fi
++
++ # Add non-PIC object to the list of files to remove.
++ if test -n "$non_pic_object" &&
++ test "$non_pic_object" != none; then
++ func_append rmfiles " $dir/$non_pic_object"
++ fi
++ fi
++ ;;
++
++ *)
++ if test "$opt_mode" = clean ; then
++ noexename=$name
++ case $file in
++ *.exe)
++ func_stripname '' '.exe' "$file"
++ file=$func_stripname_result
++ func_stripname '' '.exe' "$name"
++ noexename=$func_stripname_result
++ # $file with .exe has already been added to rmfiles,
++ # add $file without .exe
++ func_append rmfiles " $file"
++ ;;
++ esac
++ # Do a test to see if this is a libtool program.
++ if func_ltwrapper_p "$file"; then
++ if func_ltwrapper_executable_p "$file"; then
++ func_ltwrapper_scriptname "$file"
++ relink_command=
++ func_source $func_ltwrapper_scriptname_result
++ func_append rmfiles " $func_ltwrapper_scriptname_result"
++ else
++ relink_command=
++ func_source $dir/$noexename
++ fi
++
++ # note $name still contains .exe if it was in $file originally
++ # as does the version of $file that was added into $rmfiles
++ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
++ if test "$fast_install" = yes && test -n "$relink_command"; then
++ func_append rmfiles " $odir/lt-$name"
++ fi
++ if test "X$noexename" != "X$name" ; then
++ func_append rmfiles " $odir/lt-${noexename}.c"
++ fi
++ fi
++ fi
++ ;;
++ esac
++ func_show_eval "$RM $rmfiles" 'exit_status=1'
++ done
++
++ # Try to remove the ${objdir}s in the directories where we deleted files
++ for dir in $rmdirs; do
++ if test -d "$dir"; then
++ func_show_eval "rmdir $dir >/dev/null 2>&1"
++ fi
++ done
++
++ exit $exit_status
++}
++
++{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
++ func_mode_uninstall ${1+"$@"}
++
++test -z "$opt_mode" && {
++ help="$generic_help"
++ func_fatal_help "you must specify a MODE"
++}
++
++test -z "$exec_cmd" && \
++ func_fatal_help "invalid operation mode \`$opt_mode'"
++
++if test -n "$exec_cmd"; then
++ eval exec "$exec_cmd"
++ exit $EXIT_FAILURE
++fi
++
++exit $exit_status
++
++
++# The TAGs below are defined such that we never get into a situation
++# in which we disable both kinds of libraries. Given conflicting
++# choices, we go for a static library, that is the most portable,
++# since we can't tell whether shared libraries were disabled because
++# the user asked for that or because the platform doesn't support
++# them. This is particularly important on AIX, because we don't
++# support having both static and shared libraries enabled at the same
++# time on that platform, so we default to a shared-only configuration.
++# If a disable-shared tag is given, we'll fallback to a static-only
++# configuration. But we'll never go from static-only to shared-only.
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
++build_libtool_libs=no
++build_old_libs=yes
++# ### END LIBTOOL TAG CONFIG: disable-shared
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-static
++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
++# ### END LIBTOOL TAG CONFIG: disable-static
++
++# Local Variables:
++# mode:shell-script
++# sh-indentation:2
++# End:
++# vi:sw=2
++
+diff --git a/libclamav/libmspack-0.4alpha/m4/libtool.m4 b/libclamav/libmspack-0.4alpha/m4/libtool.m4
+new file mode 100644
+index 000000000000..828104cfde21
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/m4/libtool.m4
+@@ -0,0 +1,8001 @@
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
++# Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++m4_define([_LT_COPYING], [dnl
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
++# Foundation, Inc.
++# Written by Gordon Matzigkeit, 1996
++#
++# This file is part of GNU Libtool.
++#
++# GNU Libtool is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING. If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
++# obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++])
++
++# serial 57 LT_INIT
++
++
++# LT_PREREQ(VERSION)
++# ------------------
++# Complain and exit if this libtool version is less that VERSION.
++m4_defun([LT_PREREQ],
++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
++ [m4_default([$3],
++ [m4_fatal([Libtool version $1 or higher is required],
++ 63)])],
++ [$2])])
++
++
++# _LT_CHECK_BUILDDIR
++# ------------------
++# Complain if the absolute build directory name contains unusual characters
++m4_defun([_LT_CHECK_BUILDDIR],
++[case `pwd` in
++ *\ * | *\ *)
++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
++esac
++])
++
++
++# LT_INIT([OPTIONS])
++# ------------------
++AC_DEFUN([LT_INIT],
++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
++AC_BEFORE([$0], [LT_LANG])dnl
++AC_BEFORE([$0], [LT_OUTPUT])dnl
++AC_BEFORE([$0], [LTDL_INIT])dnl
++m4_require([_LT_CHECK_BUILDDIR])dnl
++
++dnl Autoconf doesn't catch unexpanded LT_ macros by default:
++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
++dnl unless we require an AC_DEFUNed macro:
++AC_REQUIRE([LTOPTIONS_VERSION])dnl
++AC_REQUIRE([LTSUGAR_VERSION])dnl
++AC_REQUIRE([LTVERSION_VERSION])dnl
++AC_REQUIRE([LTOBSOLETE_VERSION])dnl
++m4_require([_LT_PROG_LTMAIN])dnl
++
++_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
++
++dnl Parse OPTIONS
++_LT_SET_OPTIONS([$0], [$1])
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ltmain"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
++
++_LT_SETUP
++
++# Only expand once:
++m4_define([LT_INIT])
++])# LT_INIT
++
++# Old names:
++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
++dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
++
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
++m4_defun([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++ case $cc_temp in
++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++ \-*) ;;
++ *) break;;
++ esac
++done
++cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
++])
++
++
++# _LT_FILEUTILS_DEFAULTS
++# ----------------------
++# It is okay to use these file commands and assume they have been set
++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
++m4_defun([_LT_FILEUTILS_DEFAULTS],
++[: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++])# _LT_FILEUTILS_DEFAULTS
++
++
++# _LT_SETUP
++# ---------
++m4_defun([_LT_SETUP],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
++
++_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
++dnl
++_LT_DECL([], [host_alias], [0], [The host system])dnl
++_LT_DECL([], [host], [0])dnl
++_LT_DECL([], [host_os], [0])dnl
++dnl
++_LT_DECL([], [build_alias], [0], [The build system])dnl
++_LT_DECL([], [build], [0])dnl
++_LT_DECL([], [build_os], [0])dnl
++dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++dnl
++AC_REQUIRE([AC_PROG_LN_S])dnl
++test -z "$LN_S" && LN_S="ln -s"
++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
++dnl
++AC_REQUIRE([LT_CMD_MAX_LEN])dnl
++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
++dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
++m4_require([_LT_CMD_RELOAD])dnl
++m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
++m4_require([_LT_CMD_OLD_ARCHIVE])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_WITH_SYSROOT])dnl
++
++_LT_CONFIG_LIBTOOL_INIT([
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes INIT.
++if test -n "\${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
++])
++if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++fi
++
++_LT_CHECK_OBJDIR
++
++m4_require([_LT_TAG_COMPILER])dnl
++
++case $host_os in
++aix3*)
++ # AIX sometimes has problems with the GCC collect2 program. For some
++ # reason, if we set the COLLECT_NAMES environment variable, the problems
++ # vanish in a puff of smoke.
++ if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++ fi
++ ;;
++esac
++
++# Global variables:
++ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$LD" && LD=ld
++test -z "$ac_objext" && ac_objext=o
++
++_LT_CC_BASENAME([$compiler])
++
++# Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++case $deplibs_check_method in
++file_magic*)
++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++ _LT_PATH_MAGIC
++ fi
++ ;;
++esac
++
++# Use C for the default configuration in the libtool script
++LT_SUPPORTED_TAG([CC])
++_LT_LANG_C_CONFIG
++_LT_LANG_DEFAULT_CONFIG
++_LT_CONFIG_COMMANDS
++])# _LT_SETUP
++
++
++# _LT_PREPARE_SED_QUOTE_VARS
++# --------------------------
++# Define a few sed substitution that help us do robust quoting.
++m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
++[# Backslashify metacharacters that are still active within
++# double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++])
++
++# _LT_PROG_LTMAIN
++# ---------------
++# Note that this code is called both from `configure', and `config.status'
++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
++# `config.status' has no value for ac_aux_dir unless we are using Automake,
++# so we pass a copy along to make sure it has a sensible value anyway.
++m4_defun([_LT_PROG_LTMAIN],
++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
++ltmain="$ac_aux_dir/ltmain.sh"
++])# _LT_PROG_LTMAIN
++
++
++## ------------------------------------- ##
++## Accumulate code for creating libtool. ##
++## ------------------------------------- ##
++
++# So that we can recreate a full libtool script including additional
++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
++# in macros and then make a single call at the end using the `libtool'
++# label.
++
++
++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
++# ----------------------------------------
++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL_INIT],
++[m4_ifval([$1],
++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
++ [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_INIT])
++
++
++# _LT_CONFIG_LIBTOOL([COMMANDS])
++# ------------------------------
++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL],
++[m4_ifval([$1],
++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
++ [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
++
++
++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
++# -----------------------------------------------------
++m4_defun([_LT_CONFIG_SAVE_COMMANDS],
++[_LT_CONFIG_LIBTOOL([$1])
++_LT_CONFIG_LIBTOOL_INIT([$2])
++])
++
++
++# _LT_FORMAT_COMMENT([COMMENT])
++# -----------------------------
++# Add leading comment marks to the start of each line, and a trailing
++# full-stop to the whole comment if one is not present already.
++m4_define([_LT_FORMAT_COMMENT],
++[m4_ifval([$1], [
++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
++)])
++
++
++
++## ------------------------ ##
++## FIXME: Eliminate VARNAME ##
++## ------------------------ ##
++
++
++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
++# -------------------------------------------------------------------
++# CONFIGNAME is the name given to the value in the libtool script.
++# VARNAME is the (base) name used in the configure script.
++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
++# VARNAME. Any other value will be used directly.
++m4_define([_LT_DECL],
++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
++ [m4_ifval([$1], [$1], [$2])])
++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
++ m4_ifval([$4],
++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
++ lt_dict_add_subkey([lt_decl_dict], [$2],
++ [tagged?], [m4_ifval([$5], [yes], [no])])])
++])
++
++
++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
++# --------------------------------------------------------
++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
++
++
++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_tag_varnames],
++[_lt_decl_filter([tagged?], [yes], $@)])
++
++
++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
++# ---------------------------------------------------------
++m4_define([_lt_decl_filter],
++[m4_case([$#],
++ [0], [m4_fatal([$0: too few arguments: $#])],
++ [1], [m4_fatal([$0: too few arguments: $#: $1])],
++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
++])
++
++
++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
++# --------------------------------------------------
++m4_define([lt_decl_quote_varnames],
++[_lt_decl_filter([value], [1], $@)])
++
++
++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_dquote_varnames],
++[_lt_decl_filter([value], [2], $@)])
++
++
++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_varnames_tagged],
++[m4_assert([$# <= 2])dnl
++_$0(m4_quote(m4_default([$1], [[, ]])),
++ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
++ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
++m4_define([_lt_decl_varnames_tagged],
++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
++
++
++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_all_varnames],
++[_$0(m4_quote(m4_default([$1], [[, ]])),
++ m4_if([$2], [],
++ m4_quote(lt_decl_varnames),
++ m4_quote(m4_shift($@))))[]dnl
++])
++m4_define([_lt_decl_all_varnames],
++[lt_join($@, lt_decl_varnames_tagged([$1],
++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
++])
++
++
++# _LT_CONFIG_STATUS_DECLARE([VARNAME])
++# ------------------------------------
++# Quote a variable value, and forward it to `config.status' so that its
++# declaration there will have the same value as in `configure'. VARNAME
++# must have a single quote delimited value for this to work.
++m4_define([_LT_CONFIG_STATUS_DECLARE],
++[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
++
++
++# _LT_CONFIG_STATUS_DECLARATIONS
++# ------------------------------
++# We delimit libtool config variables with single quotes, so when
++# we write them to config.status, we have to be sure to quote all
++# embedded single quotes properly. In configure, this macro expands
++# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
++#
++# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
++
++
++# _LT_LIBTOOL_TAGS
++# ----------------
++# Output comment and list of tags supported by the script
++m4_defun([_LT_LIBTOOL_TAGS],
++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
++available_tags="_LT_TAGS"dnl
++])
++
++
++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
++# -----------------------------------
++# Extract the dictionary values for VARNAME (optionally with TAG) and
++# expand to a commented shell variable setting:
++#
++# # Some comment about what VAR is for.
++# visible_name=$lt_internal_name
++m4_define([_LT_LIBTOOL_DECLARE],
++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
++ [description])))[]dnl
++m4_pushdef([_libtool_name],
++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
++ [0], [_libtool_name=[$]$1],
++ [1], [_libtool_name=$lt_[]$1],
++ [2], [_libtool_name=$lt_[]$1],
++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
++])
++
++
++# _LT_LIBTOOL_CONFIG_VARS
++# -----------------------
++# Produce commented declarations of non-tagged libtool config variables
++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
++# section) are produced by _LT_LIBTOOL_TAG_VARS.
++m4_defun([_LT_LIBTOOL_CONFIG_VARS],
++[m4_foreach([_lt_var],
++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
++
++
++# _LT_LIBTOOL_TAG_VARS(TAG)
++# -------------------------
++m4_define([_LT_LIBTOOL_TAG_VARS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
++
++
++# _LT_TAGVAR(VARNAME, [TAGNAME])
++# ------------------------------
++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
++
++
++# _LT_CONFIG_COMMANDS
++# -------------------
++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
++# variables for single and double quote escaping we saved from calls
++# to _LT_DECL, we can put quote escaped variables declarations
++# into `config.status', and then the shell code to quote escape them in
++# for loops in `config.status'. Finally, any additional code accumulated
++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
++m4_defun([_LT_CONFIG_COMMANDS],
++[AC_PROVIDE_IFELSE([LT_OUTPUT],
++ dnl If the libtool generation code has been placed in $CONFIG_LT,
++ dnl instead of duplicating it all over again into config.status,
++ dnl then we will have config.status run $CONFIG_LT later, so it
++ dnl needs to know what name is stored there:
++ [AC_CONFIG_COMMANDS([libtool],
++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
++ dnl If the libtool generation code is destined for config.status,
++ dnl expand the accumulated commands and init code now:
++ [AC_CONFIG_COMMANDS([libtool],
++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
++])#_LT_CONFIG_COMMANDS
++
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
++[
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++sed_quote_subst='$sed_quote_subst'
++double_quote_subst='$double_quote_subst'
++delay_variable_subst='$delay_variable_subst'
++_LT_CONFIG_STATUS_DECLARATIONS
++LTCC='$LTCC'
++LTCFLAGS='$LTCFLAGS'
++compiler='$compiler_DEFAULT'
++
++# A function that is used when there is no print builtin or printf.
++func_fallback_echo ()
++{
++ eval 'cat <<_LTECHO_EOF
++\$[]1
++_LTECHO_EOF'
++}
++
++# Quote evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_quote_varnames); do
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
++ *[[\\\\\\\`\\"\\\$]]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++ ;;
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++ ;;
++ esac
++done
++
++# Double-quote double-evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_dquote_varnames); do
++ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
++ *[[\\\\\\\`\\"\\\$]]*)
++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++ ;;
++ *)
++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++ ;;
++ esac
++done
++
++_LT_OUTPUT_LIBTOOL_INIT
++])
++
++# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
++# ------------------------------------
++# Generate a child script FILE with all initialization necessary to
++# reuse the environment learned by the parent script, and make the
++# file executable. If COMMENT is supplied, it is inserted after the
++# `#!' sequence but before initialization text begins. After this
++# macro, additional text can be appended to FILE to form the body of
++# the child script. The macro ends with non-zero status if the
++# file could not be fully written (such as if the disk is full).
++m4_ifdef([AS_INIT_GENERATED],
++[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
++[m4_defun([_LT_GENERATED_FILE_INIT],
++[m4_require([AS_PREPARE])]dnl
++[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
++[lt_write_fail=0
++cat >$1 <<_ASEOF || lt_write_fail=1
++#! $SHELL
++# Generated by $as_me.
++$2
++SHELL=\${CONFIG_SHELL-$SHELL}
++export SHELL
++_ASEOF
++cat >>$1 <<\_ASEOF || lt_write_fail=1
++AS_SHELL_SANITIZE
++_AS_PREPARE
++exec AS_MESSAGE_FD>&1
++_ASEOF
++test $lt_write_fail = 0 && chmod +x $1[]dnl
++m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
++
++# LT_OUTPUT
++# ---------
++# This macro allows early generation of the libtool script (before
++# AC_OUTPUT is called), incase it is used in configure for compilation
++# tests.
++AC_DEFUN([LT_OUTPUT],
++[: ${CONFIG_LT=./config.lt}
++AC_MSG_NOTICE([creating $CONFIG_LT])
++_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
++[# Run this file to recreate a libtool stub with the current configuration.])
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++lt_cl_silent=false
++exec AS_MESSAGE_LOG_FD>>config.log
++{
++ echo
++ AS_BOX([Running $as_me.])
++} >&AS_MESSAGE_LOG_FD
++
++lt_cl_help="\
++\`$as_me' creates a local libtool stub from the current configuration,
++for use in further configure time tests before the real libtool is
++generated.
++
++Usage: $[0] [[OPTIONS]]
++
++ -h, --help print this help, then exit
++ -V, --version print version number, then exit
++ -q, --quiet do not print progress messages
++ -d, --debug don't remove temporary files
++
++Report bugs to <bug-libtool at gnu.org>."
++
++lt_cl_version="\
++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
++configured by $[0], generated by m4_PACKAGE_STRING.
++
++Copyright (C) 2011 Free Software Foundation, Inc.
++This config.lt script is free software; the Free Software Foundation
++gives unlimited permision to copy, distribute and modify it."
++
++while test $[#] != 0
++do
++ case $[1] in
++ --version | --v* | -V )
++ echo "$lt_cl_version"; exit 0 ;;
++ --help | --h* | -h )
++ echo "$lt_cl_help"; exit 0 ;;
++ --debug | --d* | -d )
++ debug=: ;;
++ --quiet | --q* | --silent | --s* | -q )
++ lt_cl_silent=: ;;
++
++ -*) AC_MSG_ERROR([unrecognized option: $[1]
++Try \`$[0] --help' for more information.]) ;;
++
++ *) AC_MSG_ERROR([unrecognized argument: $[1]
++Try \`$[0] --help' for more information.]) ;;
++ esac
++ shift
++done
++
++if $lt_cl_silent; then
++ exec AS_MESSAGE_FD>/dev/null
++fi
++_LTEOF
++
++cat >>"$CONFIG_LT" <<_LTEOF
++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
++_LTEOF
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++AC_MSG_NOTICE([creating $ofile])
++_LT_OUTPUT_LIBTOOL_COMMANDS
++AS_EXIT(0)
++_LTEOF
++chmod +x "$CONFIG_LT"
++
++# configure is writing to config.log, but config.lt does its own redirection,
++# appending to config.log, which fails on DOS, as config.log is still kept
++# open by configure. Here we exec the FD to /dev/null, effectively closing
++# config.log, so it can be properly (re)opened and appended to by config.lt.
++lt_cl_success=:
++test "$silent" = yes &&
++ lt_config_lt_args="$lt_config_lt_args --quiet"
++exec AS_MESSAGE_LOG_FD>/dev/null
++$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++exec AS_MESSAGE_LOG_FD>>config.log
++$lt_cl_success || AS_EXIT(1)
++])# LT_OUTPUT
++
++
++# _LT_CONFIG(TAG)
++# ---------------
++# If TAG is the built-in tag, create an initial libtool script with a
++# default configuration from the untagged config vars. Otherwise add code
++# to config.status for appending the configuration named by TAG from the
++# matching tagged config vars.
++m4_defun([_LT_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_CONFIG_SAVE_COMMANDS([
++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
++ m4_if(_LT_TAG, [C], [
++ # See if we are running on zsh, and set the options which allow our
++ # commands through without removal of \ escapes.
++ if test -n "${ZSH_VERSION+set}" ; then
++ setopt NO_GLOB_SUBST
++ fi
++
++ cfgfile="${ofile}T"
++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
++ $RM "$cfgfile"
++
++ cat <<_LT_EOF >> "$cfgfile"
++#! $SHELL
++
++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++_LT_COPYING
++_LT_LIBTOOL_TAGS
++
++# ### BEGIN LIBTOOL CONFIG
++_LT_LIBTOOL_CONFIG_VARS
++_LT_LIBTOOL_TAG_VARS
++# ### END LIBTOOL CONFIG
++
++_LT_EOF
++
++ case $host_os in
++ aix3*)
++ cat <<\_LT_EOF >> "$cfgfile"
++# AIX sometimes has problems with the GCC collect2 program. For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++ COLLECT_NAMES=
++ export COLLECT_NAMES
++fi
++_LT_EOF
++ ;;
++ esac
++
++ _LT_PROG_LTMAIN
++
++ # We use sed instead of cat because bash on DJGPP gets confused if
++ # if finds mixed CR/LF and LF-only lines. Since sed operates in
++ # text mode, it properly converts lines to CR/LF. This bash problem
++ # is reportedly fixed, but why not run on old versions too?
++ sed '$q' "$ltmain" >> "$cfgfile" \
++ || (rm -f "$cfgfile"; exit 1)
++
++ _LT_PROG_REPLACE_SHELLFNS
++
++ mv -f "$cfgfile" "$ofile" ||
++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++ chmod +x "$ofile"
++],
++[cat <<_LT_EOF >> "$ofile"
++
++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
++dnl in a comment (ie after a #).
++# ### BEGIN LIBTOOL TAG CONFIG: $1
++_LT_LIBTOOL_TAG_VARS(_LT_TAG)
++# ### END LIBTOOL TAG CONFIG: $1
++_LT_EOF
++])dnl /m4_if
++],
++[m4_if([$1], [], [
++ PACKAGE='$PACKAGE'
++ VERSION='$VERSION'
++ TIMESTAMP='$TIMESTAMP'
++ RM='$RM'
++ ofile='$ofile'], [])
++])dnl /_LT_CONFIG_SAVE_COMMANDS
++])# _LT_CONFIG
++
++
++# LT_SUPPORTED_TAG(TAG)
++# ---------------------
++# Trace this macro to discover what tags are supported by the libtool
++# --tag option, using:
++# autoconf --trace 'LT_SUPPORTED_TAG:$1'
++AC_DEFUN([LT_SUPPORTED_TAG], [])
++
++
++# C support is built-in for now
++m4_define([_LT_LANG_C_enabled], [])
++m4_define([_LT_TAGS], [])
++
++
++# LT_LANG(LANG)
++# -------------
++# Enable libtool support for the given language if not already enabled.
++AC_DEFUN([LT_LANG],
++[AC_BEFORE([$0], [LT_OUTPUT])dnl
++m4_case([$1],
++ [C], [_LT_LANG(C)],
++ [C++], [_LT_LANG(CXX)],
++ [Go], [_LT_LANG(GO)],
++ [Java], [_LT_LANG(GCJ)],
++ [Fortran 77], [_LT_LANG(F77)],
++ [Fortran], [_LT_LANG(FC)],
++ [Windows Resource], [_LT_LANG(RC)],
++ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
++ [_LT_LANG($1)],
++ [m4_fatal([$0: unsupported language: "$1"])])])dnl
++])# LT_LANG
++
++
++# _LT_LANG(LANGNAME)
++# ------------------
++m4_defun([_LT_LANG],
++[m4_ifdef([_LT_LANG_]$1[_enabled], [],
++ [LT_SUPPORTED_TAG([$1])dnl
++ m4_append([_LT_TAGS], [$1 ])dnl
++ m4_define([_LT_LANG_]$1[_enabled], [])dnl
++ _LT_LANG_$1_CONFIG($1)])dnl
++])# _LT_LANG
++
++
++m4_ifndef([AC_PROG_GO], [
++############################################################
++# NOTE: This macro has been submitted for inclusion into #
++# GNU Autoconf as AC_PROG_GO. When it is available in #
++# a released version of Autoconf we should remove this #
++# macro and use it instead. #
++############################################################
++m4_defun([AC_PROG_GO],
++[AC_LANG_PUSH(Go)dnl
++AC_ARG_VAR([GOC], [Go compiler command])dnl
++AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
++_AC_ARG_VAR_LDFLAGS()dnl
++AC_CHECK_TOOL(GOC, gccgo)
++if test -z "$GOC"; then
++ if test -n "$ac_tool_prefix"; then
++ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
++ fi
++fi
++if test -z "$GOC"; then
++ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
++fi
++])#m4_defun
++])#m4_ifndef
++
++
++# _LT_LANG_DEFAULT_CONFIG
++# -----------------------
++m4_defun([_LT_LANG_DEFAULT_CONFIG],
++[AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [LT_LANG(CXX)],
++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_F77],
++ [LT_LANG(F77)],
++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_FC],
++ [LT_LANG(FC)],
++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
++
++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
++dnl pulling things in needlessly.
++AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
++ [LT_LANG(GCJ)],
++ [m4_ifdef([AC_PROG_GCJ],
++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
++ m4_ifdef([A][M_PROG_GCJ],
++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
++ m4_ifdef([LT_PROG_GCJ],
++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
++
++AC_PROVIDE_IFELSE([AC_PROG_GO],
++ [LT_LANG(GO)],
++ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
++
++AC_PROVIDE_IFELSE([LT_PROG_RC],
++ [LT_LANG(RC)],
++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
++])# _LT_LANG_DEFAULT_CONFIG
++
++# Obsolete macros:
++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
++dnl AC_DEFUN([AC_LIBTOOL_F77], [])
++dnl AC_DEFUN([AC_LIBTOOL_FC], [])
++dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++dnl AC_DEFUN([AC_LIBTOOL_RC], [])
++
++
++# _LT_TAG_COMPILER
++# ----------------
++m4_defun([_LT_TAG_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
++
++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_TAG_COMPILER
++
++
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++m4_defun([_LT_COMPILER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
++])# _LT_COMPILER_BOILERPLATE
++
++
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++m4_defun([_LT_LINKER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
++])# _LT_LINKER_BOILERPLATE
++
++# _LT_REQUIRED_DARWIN_CHECKS
++# -------------------------
++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
++ case $host_os in
++ rhapsody* | darwin*)
++ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
++ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
++ AC_CHECK_TOOL([LIPO], [lipo], [:])
++ AC_CHECK_TOOL([OTOOL], [otool], [:])
++ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
++ _LT_DECL([], [DSYMUTIL], [1],
++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
++ _LT_DECL([], [NMEDIT], [1],
++ [Tool to change global to local symbols on Mac OS X])
++ _LT_DECL([], [LIPO], [1],
++ [Tool to manipulate fat objects and archives on Mac OS X])
++ _LT_DECL([], [OTOOL], [1],
++ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
++ _LT_DECL([], [OTOOL64], [1],
++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
++
++ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
++ [lt_cv_apple_cc_single_mod=no
++ if test -z "${LT_MULTI_MODULE}"; then
++ # By default we will add the -single_module flag. You can override
++ # by either setting the environment variable LT_MULTI_MODULE
++ # non-empty at configure time, or by adding -multi_module to the
++ # link flags.
++ rm -rf libconftest.dylib*
++ echo "int foo(void){return 1;}" > conftest.c
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++ _lt_result=$?
++ # If there is a non-empty error log, and "single_module"
++ # appears in it, assume the flag caused a linker warning
++ if test -s conftest.err && $GREP single_module conftest.err; then
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ # Otherwise, if the output was created with a 0 exit code from
++ # the compiler, it worked.
++ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
++ lt_cv_apple_cc_single_mod=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -rf libconftest.dylib*
++ rm -f conftest.*
++ fi])
++
++ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
++ [lt_cv_ld_exported_symbols_list],
++ [lt_cv_ld_exported_symbols_list=no
++ save_LDFLAGS=$LDFLAGS
++ echo "_main" > conftest.sym
++ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [lt_cv_ld_exported_symbols_list=yes],
++ [lt_cv_ld_exported_symbols_list=no])
++ LDFLAGS="$save_LDFLAGS"
++ ])
++
++ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
++ [lt_cv_ld_force_load=no
++ cat > conftest.c << _LT_EOF
++int forced_loaded() { return 2;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
++ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
++ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
++ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
++ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
++ cat > conftest.c << _LT_EOF
++int main() { return 0;}
++_LT_EOF
++ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
++ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
++ _lt_result=$?
++ if test -s conftest.err && $GREP force_load conftest.err; then
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
++ lt_cv_ld_force_load=yes
++ else
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ fi
++ rm -f conftest.err libconftest.a conftest conftest.c
++ rm -rf conftest.dSYM
++ ])
++ case $host_os in
++ rhapsody* | darwin1.[[012]])
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++ darwin1.*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ darwin*) # darwin 5.x on
++ # if running on 10.5 or later, the deployment target defaults
++ # to the OS version, if on x86, and 10.4, the deployment
++ # target defaults to 10.4. Don't you love it?
++ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ 10.[[012]]*)
++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++ 10.*)
++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++ esac
++ ;;
++ esac
++ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++ _lt_dar_single_mod='$single_module'
++ fi
++ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++ else
++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++ fi
++ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
++ _lt_dsymutil='~$DSYMUTIL $lib || :'
++ else
++ _lt_dsymutil=
++ fi
++ ;;
++ esac
++])
++
++
++# _LT_DARWIN_LINKER_FEATURES([TAG])
++# ---------------------------------
++# Checks for linker and compiler features on darwin
++m4_defun([_LT_DARWIN_LINKER_FEATURES],
++[
++ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_automatic, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ if test "$lt_cv_ld_force_load" = "yes"; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
++ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
++ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++ fi
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
++ case $cc_basename in
++ ifort*) _lt_dar_can_shared=yes ;;
++ *) _lt_dar_can_shared=$GCC ;;
++ esac
++ if test "$_lt_dar_can_shared" = "yes"; then
++ output_verbose_link_cmd=func_echo_all
++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++ m4_if([$1], [CXX],
++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
++ fi
++],[])
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++])
++
++# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
++# ----------------------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++# Store the results from the different compilers for each TAGNAME.
++# Allow to override them for all tags through lt_cv_aix_libpath.
++m4_defun([_LT_SYS_MODULE_PATH_AIX],
++[m4_require([_LT_DECL_SED])dnl
++if test "${lt_cv_aix_libpath+set}" = set; then
++ aix_libpath=$lt_cv_aix_libpath
++else
++ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
++ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
++ lt_aix_libpath_sed='[
++ /Import File Strings/,/^$/ {
++ /^0/ {
++ s/^0 *\([^ ]*\) *$/\1/
++ p
++ }
++ }]'
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ # Check for a 64-bit object if we didn't find anything.
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++ fi],[])
++ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
++ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
++ fi
++ ])
++ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
++fi
++])# _LT_SYS_MODULE_PATH_AIX
++
++
++# _LT_SHELL_INIT(ARG)
++# -------------------
++m4_define([_LT_SHELL_INIT],
++[m4_divert_text([M4SH-INIT], [$1
++])])# _LT_SHELL_INIT
++
++
++
++# _LT_PROG_ECHO_BACKSLASH
++# -----------------------
++# Find how we can fake an echo command that does not interpret backslash.
++# In particular, with Autoconf 2.60 or later we add some code to the start
++# of the generated configure script which will find a shell with a builtin
++# printf (which we can use as an echo command).
++m4_defun([_LT_PROG_ECHO_BACKSLASH],
++[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++
++AC_MSG_CHECKING([how to print strings])
++# Test print first, because it will be a builtin if present.
++if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
++ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='print -r --'
++elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
++ ECHO='printf %s\n'
++else
++ # Use this function as a fallback that always works.
++ func_fallback_echo ()
++ {
++ eval 'cat <<_LTECHO_EOF
++$[]1
++_LTECHO_EOF'
++ }
++ ECHO='func_fallback_echo'
++fi
++
++# func_echo_all arg...
++# Invoke $ECHO with all args, space-separated.
++func_echo_all ()
++{
++ $ECHO "$*"
++}
++
++case "$ECHO" in
++ printf*) AC_MSG_RESULT([printf]) ;;
++ print*) AC_MSG_RESULT([print -r]) ;;
++ *) AC_MSG_RESULT([cat]) ;;
++esac
++
++m4_ifdef([_AS_DETECT_SUGGESTED],
++[_AS_DETECT_SUGGESTED([
++ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
++ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
++ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
++ PATH=/empty FPATH=/empty; export PATH FPATH
++ test "X`printf %s $ECHO`" = "X$ECHO" \
++ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
++
++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
++_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
++])# _LT_PROG_ECHO_BACKSLASH
++
++
++# _LT_WITH_SYSROOT
++# ----------------
++AC_DEFUN([_LT_WITH_SYSROOT],
++[AC_MSG_CHECKING([for sysroot])
++AC_ARG_WITH([sysroot],
++[ --with-sysroot[=DIR] Search for dependent libraries within DIR
++ (or the compiler's sysroot if not specified).],
++[], [with_sysroot=no])
++
++dnl lt_sysroot will always be passed unquoted. We quote it here
++dnl in case the user passed a directory name.
++lt_sysroot=
++case ${with_sysroot} in #(
++ yes)
++ if test "$GCC" = yes; then
++ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
++ fi
++ ;; #(
++ /*)
++ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
++ ;; #(
++ no|'')
++ ;; #(
++ *)
++ AC_MSG_RESULT([${with_sysroot}])
++ AC_MSG_ERROR([The sysroot must be an absolute path.])
++ ;;
++esac
++
++ AC_MSG_RESULT([${lt_sysroot:-no}])
++_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
++[dependent libraries, and in which our libraries should be installed.])])
++
++# _LT_ENABLE_LOCK
++# ---------------
++m4_defun([_LT_ENABLE_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++ [AS_HELP_STRING([--disable-libtool-lock],
++ [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *ELF-32*)
++ HPUX_IA64_MODE="32"
++ ;;
++ *ELF-64*)
++ HPUX_IA64_MODE="64"
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++*-*-irix6*)
++ # Find out which ABI we are using.
++ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -melf32bsmip"
++ ;;
++ *N32*)
++ LD="${LD-ld} -melf32bmipn32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -melf64bmip"
++ ;;
++ esac
++ else
++ case `/usr/bin/file conftest.$ac_objext` in
++ *32-bit*)
++ LD="${LD-ld} -32"
++ ;;
++ *N32*)
++ LD="${LD-ld} -n32"
++ ;;
++ *64-bit*)
++ LD="${LD-ld} -64"
++ ;;
++ esac
++ fi
++ fi
++ rm -rf conftest*
++ ;;
++
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *32-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_i386_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_i386"
++ ;;
++ ppc64-*linux*|powerpc64-*linux*)
++ LD="${LD-ld} -m elf32ppclinux"
++ ;;
++ s390x-*linux*)
++ LD="${LD-ld} -m elf_s390"
++ ;;
++ sparc64-*linux*)
++ LD="${LD-ld} -m elf32_sparc"
++ ;;
++ esac
++ ;;
++ *64-bit*)
++ case $host in
++ x86_64-*kfreebsd*-gnu)
++ LD="${LD-ld} -m elf_x86_64_fbsd"
++ ;;
++ x86_64-*linux*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ ppc*-*linux*|powerpc*-*linux*)
++ LD="${LD-ld} -m elf64ppc"
++ ;;
++ s390*-*linux*|s390*-*tpf*)
++ LD="${LD-ld} -m elf64_s390"
++ ;;
++ sparc*-*linux*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++
++*-*-sco3.2v5*)
++ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++ SAVE_CFLAGS="$CFLAGS"
++ CFLAGS="$CFLAGS -belf"
++ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++ [AC_LANG_PUSH(C)
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++ AC_LANG_POP])
++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++ CFLAGS="$SAVE_CFLAGS"
++ fi
++ ;;
++*-*solaris*)
++ # Find out which ABI we are using.
++ echo 'int i;' > conftest.$ac_ext
++ if AC_TRY_EVAL(ac_compile); then
++ case `/usr/bin/file conftest.o` in
++ *64-bit*)
++ case $lt_cv_prog_gnu_ld in
++ yes*)
++ case $host in
++ i?86-*-solaris*)
++ LD="${LD-ld} -m elf_x86_64"
++ ;;
++ sparc*-*-solaris*)
++ LD="${LD-ld} -m elf64_sparc"
++ ;;
++ esac
++ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
++ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
++ LD="${LD-ld}_sol2"
++ fi
++ ;;
++ *)
++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++ LD="${LD-ld} -64"
++ fi
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ rm -rf conftest*
++ ;;
++esac
++
++need_locks="$enable_libtool_lock"
++])# _LT_ENABLE_LOCK
++
++
++# _LT_PROG_AR
++# -----------
++m4_defun([_LT_PROG_AR],
++[AC_CHECK_TOOLS(AR, [ar], false)
++: ${AR=ar}
++: ${AR_FLAGS=cru}
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
++
++AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
++ [lt_cv_ar_at_file=no
++ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
++ [echo conftest.$ac_objext > conftest.lst
++ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -eq 0; then
++ # Ensure the archiver fails upon bogus file names.
++ rm -f conftest.$ac_objext libconftest.a
++ AC_TRY_EVAL([lt_ar_try])
++ if test "$ac_status" -ne 0; then
++ lt_cv_ar_at_file=@
++ fi
++ fi
++ rm -f conftest.* libconftest.a
++ ])
++ ])
++
++if test "x$lt_cv_ar_at_file" = xno; then
++ archiver_list_spec=
++else
++ archiver_list_spec=$lt_cv_ar_at_file
++fi
++_LT_DECL([], [archiver_list_spec], [1],
++ [How to feed a file listing to the archiver])
++])# _LT_PROG_AR
++
++
++# _LT_CMD_OLD_ARCHIVE
++# -------------------
++m4_defun([_LT_CMD_OLD_ARCHIVE],
++[_LT_PROG_AR
++
++AC_CHECK_TOOL(STRIP, strip, :)
++test -z "$STRIP" && STRIP=:
++_LT_DECL([], [STRIP], [1], [A symbol stripping program])
++
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++test -z "$RANLIB" && RANLIB=:
++_LT_DECL([], [RANLIB], [1],
++ [Commands used to install an old-style archive])
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
++ ;;
++ *)
++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
++ ;;
++ esac
++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
++fi
++
++case $host_os in
++ darwin*)
++ lock_old_archive_extraction=yes ;;
++ *)
++ lock_old_archive_extraction=no ;;
++esac
++_LT_DECL([], [old_postinstall_cmds], [2])
++_LT_DECL([], [old_postuninstall_cmds], [2])
++_LT_TAGDECL([], [old_archive_cmds], [2],
++ [Commands used to build an old-style archive])
++_LT_DECL([], [lock_old_archive_extraction], [0],
++ [Whether to use a lock for old archive extraction])
++])# _LT_CMD_OLD_ARCHIVE
++
++
++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([_LT_COMPILER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++ lt_compiler_flag="$3"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ # The option is referenced via a variable to avoid confusing sed.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>conftest.err)
++ ac_status=$?
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s "$ac_outfile"; then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings other than the usual output.
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ fi
++ $RM conftest*
++])
++
++if test x"[$]$2" = xyes; then
++ m4_if([$5], , :, [$5])
++else
++ m4_if([$6], , :, [$6])
++fi
++])# _LT_COMPILER_OPTION
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
++
++
++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++# [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------
++# Check whether the given linker option works
++AC_DEFUN([_LT_LINKER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++ [$2=no
++ save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS $3"
++ echo "$lt_simple_link_test_code" > conftest.$ac_ext
++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++ # The linker can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ if test -s conftest.err; then
++ # Append any errors to the config.log.
++ cat conftest.err 1>&AS_MESSAGE_LOG_FD
++ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++ if diff conftest.exp conftest.er2 >/dev/null; then
++ $2=yes
++ fi
++ else
++ $2=yes
++ fi
++ fi
++ $RM -r conftest*
++ LDFLAGS="$save_LDFLAGS"
++])
++
++if test x"[$]$2" = xyes; then
++ m4_if([$4], , :, [$4])
++else
++ m4_if([$5], , :, [$5])
++fi
++])# _LT_LINKER_OPTION
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
++
++
++# LT_CMD_MAX_LEN
++#---------------
++AC_DEFUN([LT_CMD_MAX_LEN],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++ i=0
++ teststring="ABCD"
++
++ case $build_os in
++ msdosdjgpp*)
++ # On DJGPP, this test can blow up pretty badly due to problems in libc
++ # (any single argument exceeding 2000 bytes causes a buffer overrun
++ # during glob expansion). Even if it were fixed, the result of this
++ # check would be larger than it should be.
++ lt_cv_sys_max_cmd_len=12288; # 12K is about right
++ ;;
++
++ gnu*)
++ # Under GNU Hurd, this test is not required because there is
++ # no limit to the length of command line arguments.
++ # Libtool will interpret -1 as no limit whatsoever
++ lt_cv_sys_max_cmd_len=-1;
++ ;;
++
++ cygwin* | mingw* | cegcc*)
++ # On Win9x/ME, this test blows up -- it succeeds, but takes
++ # about 5 minutes as the teststring grows exponentially.
++ # Worse, since 9x/ME are not pre-emptively multitasking,
++ # you end up with a "frozen" computer, even though with patience
++ # the test eventually succeeds (with a max line length of 256k).
++ # Instead, let's just punt: use the minimum linelength reported by
++ # all of the supported platforms: 8192 (on NT/2K/XP).
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ mint*)
++ # On MiNT this can take a long time and run out of memory.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ amigaos*)
++ # On AmigaOS with pdksh, this test takes hours, literally.
++ # So we just punt and use a minimum line length of 8192.
++ lt_cv_sys_max_cmd_len=8192;
++ ;;
++
++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++ # This has been around since 386BSD, at least. Likely further.
++ if test -x /sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++ elif test -x /usr/sbin/sysctl; then
++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++ else
++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
++ fi
++ # And add a safety zone
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ ;;
++
++ interix*)
++ # We know the value 262144 and hardcode it with a safety zone (like BSD)
++ lt_cv_sys_max_cmd_len=196608
++ ;;
++
++ os2*)
++ # The test takes a long time on OS/2.
++ lt_cv_sys_max_cmd_len=8192
++ ;;
++
++ osf*)
++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++ # nice to cause kernel panics so lets avoid the loop below.
++ # First set a reasonable default.
++ lt_cv_sys_max_cmd_len=16384
++ #
++ if test -x /sbin/sysconfig; then
++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++ *1*) lt_cv_sys_max_cmd_len=-1 ;;
++ esac
++ fi
++ ;;
++ sco3.2v5*)
++ lt_cv_sys_max_cmd_len=102400
++ ;;
++ sysv5* | sco5v6* | sysv4.2uw2*)
++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++ if test -n "$kargmax"; then
++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
++ else
++ lt_cv_sys_max_cmd_len=32768
++ fi
++ ;;
++ *)
++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++ if test -n "$lt_cv_sys_max_cmd_len"; then
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++ else
++ # Make teststring a little bigger before we do anything with it.
++ # a 1K string should be a reasonable start.
++ for i in 1 2 3 4 5 6 7 8 ; do
++ teststring=$teststring$teststring
++ done
++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++ # If test is not a shell built-in, we'll probably end up computing a
++ # maximum length that is only half of the actual maximum length, but
++ # we can't tell.
++ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
++ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
++ test $i != 17 # 1/2 MB should be enough
++ do
++ i=`expr $i + 1`
++ teststring=$teststring$teststring
++ done
++ # Only check the string length outside the loop.
++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
++ teststring=
++ # Add a significant safety factor because C++ compilers can tack on
++ # massive amounts of additional arguments before passing them to the
++ # linker. It appears as though 1/2 is a usable value.
++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++ fi
++ ;;
++ esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++ AC_MSG_RESULT(none)
++fi
++max_cmd_len=$lt_cv_sys_max_cmd_len
++_LT_DECL([], [max_cmd_len], [0],
++ [What is the maximum length of a command?])
++])# LT_CMD_MAX_LEN
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
++
++
++# _LT_HEADER_DLFCN
++# ----------------
++m4_defun([_LT_HEADER_DLFCN],
++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
++])# _LT_HEADER_DLFCN
++
++
++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ----------------------------------------------------------------
++m4_defun([_LT_TRY_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++ [$4]
++else
++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++ lt_status=$lt_dlunknown
++ cat > conftest.$ac_ext <<_LT_EOF
++[#line $LINENO "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++# define LT_DLGLOBAL RTLD_GLOBAL
++#else
++# ifdef DL_GLOBAL
++# define LT_DLGLOBAL DL_GLOBAL
++# else
++# define LT_DLGLOBAL 0
++# endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++ find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++# ifdef RTLD_LAZY
++# define LT_DLLAZY_OR_NOW RTLD_LAZY
++# else
++# ifdef DL_LAZY
++# define LT_DLLAZY_OR_NOW DL_LAZY
++# else
++# ifdef RTLD_NOW
++# define LT_DLLAZY_OR_NOW RTLD_NOW
++# else
++# ifdef DL_NOW
++# define LT_DLLAZY_OR_NOW DL_NOW
++# else
++# define LT_DLLAZY_OR_NOW 0
++# endif
++# endif
++# endif
++# endif
++#endif
++
++/* When -fvisbility=hidden is used, assume the code has been annotated
++ correspondingly for the symbols needed. */
++#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
++int fnord () __attribute__((visibility("default")));
++#endif
++
++int fnord () { return 42; }
++int main ()
++{
++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++ int status = $lt_dlunknown;
++
++ if (self)
++ {
++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
++ else
++ {
++ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++ else puts (dlerror ());
++ }
++ /* dlclose (self); */
++ }
++ else
++ puts (dlerror ());
++
++ return status;
++}]
++_LT_EOF
++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++ lt_status=$?
++ case x$lt_status in
++ x$lt_dlno_uscore) $1 ;;
++ x$lt_dlneed_uscore) $2 ;;
++ x$lt_dlunknown|x*) $3 ;;
++ esac
++ else :
++ # compilation failed
++ $3
++ fi
++fi
++rm -fr conftest*
++])# _LT_TRY_DLOPEN_SELF
++
++
++# LT_SYS_DLOPEN_SELF
++# ------------------
++AC_DEFUN([LT_SYS_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++ enable_dlopen=unknown
++ enable_dlopen_self=unknown
++ enable_dlopen_self_static=unknown
++else
++ lt_cv_dlopen=no
++ lt_cv_dlopen_libs=
++
++ case $host_os in
++ beos*)
++ lt_cv_dlopen="load_add_on"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ;;
++
++ mingw* | pw32* | cegcc*)
++ lt_cv_dlopen="LoadLibrary"
++ lt_cv_dlopen_libs=
++ ;;
++
++ cygwin*)
++ lt_cv_dlopen="dlopen"
++ lt_cv_dlopen_libs=
++ ;;
++
++ darwin*)
++ # if libdl is installed we need to link against it
++ AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++ lt_cv_dlopen="dyld"
++ lt_cv_dlopen_libs=
++ lt_cv_dlopen_self=yes
++ ])
++ ;;
++
++ *)
++ AC_CHECK_FUNC([shl_load],
++ [lt_cv_dlopen="shl_load"],
++ [AC_CHECK_LIB([dld], [shl_load],
++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
++ [AC_CHECK_FUNC([dlopen],
++ [lt_cv_dlopen="dlopen"],
++ [AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++ [AC_CHECK_LIB([svld], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++ [AC_CHECK_LIB([dld], [dld_link],
++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
++ ])
++ ])
++ ])
++ ])
++ ])
++ ;;
++ esac
++
++ if test "x$lt_cv_dlopen" != xno; then
++ enable_dlopen=yes
++ else
++ enable_dlopen=no
++ fi
++
++ case $lt_cv_dlopen in
++ dlopen)
++ save_CPPFLAGS="$CPPFLAGS"
++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++ save_LDFLAGS="$LDFLAGS"
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++ save_LIBS="$LIBS"
++ LIBS="$lt_cv_dlopen_libs $LIBS"
++
++ AC_CACHE_CHECK([whether a program can dlopen itself],
++ lt_cv_dlopen_self, [dnl
++ _LT_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++ ])
++
++ if test "x$lt_cv_dlopen_self" = xyes; then
++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++ lt_cv_dlopen_self_static, [dnl
++ _LT_TRY_DLOPEN_SELF(
++ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
++ ])
++ fi
++
++ CPPFLAGS="$save_CPPFLAGS"
++ LDFLAGS="$save_LDFLAGS"
++ LIBS="$save_LIBS"
++ ;;
++ esac
++
++ case $lt_cv_dlopen_self in
++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++ *) enable_dlopen_self=unknown ;;
++ esac
++
++ case $lt_cv_dlopen_self_static in
++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++ *) enable_dlopen_self_static=unknown ;;
++ esac
++fi
++_LT_DECL([dlopen_support], [enable_dlopen], [0],
++ [Whether dlopen is supported])
++_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
++ [Whether dlopen of programs is supported])
++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
++ [Whether dlopen of statically linked programs is supported])
++])# LT_SYS_DLOPEN_SELF
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
++
++
++# _LT_COMPILER_C_O([TAGNAME])
++# ---------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler.
++# This macro does not hard code the compiler like AC_PROG_CC_C_O.
++m4_defun([_LT_COMPILER_C_O],
++[m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++ $RM -r conftest 2>/dev/null
++ mkdir conftest
++ cd conftest
++ mkdir out
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ lt_compiler_flag="-o out/conftest2.$ac_objext"
++ # Insert the option either (1) after the last *FLAGS variable, or
++ # (2) before a word containing "conftest.", or (3) at the end.
++ # Note that $ac_compile itself does not contain backslashes and begins
++ # with a dollar sign (not a hyphen), so the echo should work correctly.
++ lt_compile=`echo "$ac_compile" | $SED \
++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++ -e 's:$: $lt_compiler_flag:'`
++ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$lt_compile" 2>out/conftest.err)
++ ac_status=$?
++ cat out/conftest.err >&AS_MESSAGE_LOG_FD
++ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++ if (exit $ac_status) && test -s out/conftest2.$ac_objext
++ then
++ # The compiler can only warn and ignore the option if not recognized
++ # So say no if there are warnings
++ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++ fi
++ fi
++ chmod u+w . 2>&AS_MESSAGE_LOG_FD
++ $RM conftest*
++ # SGI C++ compiler will create directory out/ii_files/ for
++ # template instantiation
++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++ $RM out/* && rmdir out
++ cd ..
++ $RM -r conftest
++ $RM conftest*
++])
++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
++ [Does compiler simultaneously support -c and -o options?])
++])# _LT_COMPILER_C_O
++
++
++# _LT_COMPILER_FILE_LOCKS([TAGNAME])
++# ----------------------------------
++# Check to see if we can do hard links to lock some files if needed
++m4_defun([_LT_COMPILER_FILE_LOCKS],
++[m4_require([_LT_ENABLE_LOCK])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_COMPILER_C_O([$1])
++
++hard_links="nottested"
++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++ # do not overwrite the value of need_locks provided by the user
++ AC_MSG_CHECKING([if we can lock with hard links])
++ hard_links=yes
++ $RM conftest*
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ touch conftest.a
++ ln conftest.a conftest.b 2>&5 || hard_links=no
++ ln conftest.a conftest.b 2>/dev/null && hard_links=no
++ AC_MSG_RESULT([$hard_links])
++ if test "$hard_links" = no; then
++ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++ need_locks=warn
++ fi
++else
++ need_locks=no
++fi
++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
++])# _LT_COMPILER_FILE_LOCKS
++
++
++# _LT_CHECK_OBJDIR
++# ----------------
++m4_defun([_LT_CHECK_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++ lt_cv_objdir=.libs
++else
++ # MS-DOS does not allow filenames that begin with a dot.
++ lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++_LT_DECL([], [objdir], [0],
++ [The name of the directory that contains temporary libtool files])dnl
++m4_pattern_allow([LT_OBJDIR])dnl
++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
++ [Define to the sub-directory in which libtool stores uninstalled libraries.])
++])# _LT_CHECK_OBJDIR
++
++
++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
++# --------------------------------------
++# Check hardcoding attributes.
++m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
++ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++
++ # We can hardcode non-existent directories.
++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
++ # If the only mechanism to avoid hardcoding is shlibpath_var, we
++ # have to relink, otherwise we might link with an installed library
++ # when we should be linking with a yet-to-be-installed one
++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
++ # Linking always hardcodes the temporary library directory.
++ _LT_TAGVAR(hardcode_action, $1)=relink
++ else
++ # We can link without hardcoding, and we can hardcode nonexisting dirs.
++ _LT_TAGVAR(hardcode_action, $1)=immediate
++ fi
++else
++ # We cannot hardcode anything, or else we can only hardcode existing
++ # directories.
++ _LT_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
++
++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
++ # Fast installation is not supported
++ enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++ test "$enable_shared" = no; then
++ # Fast installation is not necessary
++ enable_fast_install=needless
++fi
++_LT_TAGDECL([], [hardcode_action], [0],
++ [How to hardcode a shared library path into an executable])
++])# _LT_LINKER_HARDCODE_LIBPATH
++
++
++# _LT_CMD_STRIPLIB
++# ----------------
++m4_defun([_LT_CMD_STRIPLIB],
++[m4_require([_LT_DECL_EGREP])
++striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++ AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++ case $host_os in
++ darwin*)
++ if test -n "$STRIP" ; then
++ striplib="$STRIP -x"
++ old_striplib="$STRIP -S"
++ AC_MSG_RESULT([yes])
++ else
++ AC_MSG_RESULT([no])
++ fi
++ ;;
++ *)
++ AC_MSG_RESULT([no])
++ ;;
++ esac
++fi
++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
++_LT_DECL([], [striplib], [1])
++])# _LT_CMD_STRIPLIB
++
++
++# _LT_SYS_DYNAMIC_LINKER([TAG])
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++m4_defun([_LT_SYS_DYNAMIC_LINKER],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_OBJDUMP])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
++m4_if([$1],
++ [], [
++if test "$GCC" = yes; then
++ case $host_os in
++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++ *) lt_awk_arg="/^libraries:/" ;;
++ esac
++ case $host_os in
++ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
++ *) lt_sed_strip_eq="s,=/,/,g" ;;
++ esac
++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
++ case $lt_search_path_spec in
++ *\;*)
++ # if the path contains ";" then we assume it to be the separator
++ # otherwise default to the standard path separator (i.e. ":") - it is
++ # assumed that no part of a normal pathname contains ";" but that should
++ # okay in the real world where ";" in dirpaths is itself problematic.
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
++ ;;
++ *)
++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ esac
++ # Ok, now we have the path, separated by spaces, we can step through it
++ # and add multilib dir if necessary.
++ lt_tmp_lt_search_path_spec=
++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++ for lt_sys_path in $lt_search_path_spec; do
++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++ else
++ test -d "$lt_sys_path" && \
++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++ fi
++ done
++ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++ lt_foo="";
++ lt_count=0;
++ for (lt_i = NF; lt_i > 0; lt_i--) {
++ if ($lt_i != "" && $lt_i != ".") {
++ if ($lt_i == "..") {
++ lt_count++;
++ } else {
++ if (lt_count == 0) {
++ lt_foo="/" $lt_i lt_foo;
++ } else {
++ lt_count--;
++ }
++ }
++ }
++ }
++ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++ # AWK program above erroneously prepends '/' to C:/dos/paths
++ # for these hosts.
++ case $host_os in
++ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
++ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
++ esac
++ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
++else
++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++ shlibpath_var=LIBPATH
++
++ # AIX 3 has no versioning support, so we append a major version to the name.
++ soname_spec='${libname}${release}${shared_ext}$major'
++ ;;
++
++aix[[4-9]]*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
++ if test "$host_cpu" = ia64; then
++ # AIX 5 supports IA64
++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ else
++ # With GCC up to 2.95.x, collect2 would create an import file
++ # for dependence libraries. The import file would start with
++ # the line `#! .'. This would cause the generated library to
++ # depend on `.', always an invalid library. This was fixed in
++ # development snapshots of GCC prior to 3.0.
++ case $host_os in
++ aix4 | aix4.[[01]] | aix4.[[01]].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
++ ;;
++ esac
++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++ # soname into executable. Probably we can add versioning support to
++ # collect2, so additional links can be useful in future.
++ if test "$aix_use_runtimelinking" = yes; then
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ else
++ # We preserve .a as extension for shared libraries through AIX4.2
++ # and later when we are not doing run time linking.
++ library_names_spec='${libname}${release}.a $libname.a'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ fi
++ shlibpath_var=LIBPATH
++ fi
++ ;;
++
++amigaos*)
++ case $host_cpu in
++ powerpc)
++ # Since July 2007 AmigaOS4 officially supports .so libraries.
++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ ;;
++ m68k)
++ library_names_spec='$libname.ixlibrary $libname.a'
++ # Create ${libname}_ixlibrary.a entries in /sys/libs.
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++ ;;
++ esac
++ ;;
++
++beos*)
++ library_names_spec='${libname}${shared_ext}'
++ dynamic_linker="$host_os ld.so"
++ shlibpath_var=LIBRARY_PATH
++ ;;
++
++bsdi[[45]]*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++ # the default ld.so.conf also contains /usr/contrib/lib and
++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++ # libtool to hard-code these into programs
++ ;;
++
++cygwin* | mingw* | pw32* | cegcc*)
++ version_type=windows
++ shrext_cmds=".dll"
++ need_version=no
++ need_lib_prefix=no
++
++ case $GCC,$cc_basename in
++ yes,*)
++ # gcc
++ library_names_spec='$libname.dll.a'
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname~
++ chmod a+x \$dldir/$dlname~
++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
++ fi'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++
++ case $host_os in
++ cygwin*)
++ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
++ ;;
++ mingw* | cegcc*)
++ # MinGW DLLs use traditional 'lib' prefix
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ ;;
++ pw32*)
++ # pw32 DLLs use 'pw' prefix rather than 'lib'
++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ ;;
++ esac
++ dynamic_linker='Win32 ld.exe'
++ ;;
++
++ *,cl*)
++ # Native MSVC
++ libname_spec='$name'
++ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++ library_names_spec='${libname}.dll.lib'
++
++ case $build_os in
++ mingw*)
++ sys_lib_search_path_spec=
++ lt_save_ifs=$IFS
++ IFS=';'
++ for lt_path in $LIB
++ do
++ IFS=$lt_save_ifs
++ # Let DOS variable expansion print the short 8.3 style file name.
++ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
++ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
++ done
++ IFS=$lt_save_ifs
++ # Convert to MSYS style.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
++ ;;
++ cygwin*)
++ # Convert to unix form, then to dos form, then back to unix form
++ # but this time dos style (no spaces!) so that the unix form looks
++ # like /cygdrive/c/PROGRA~1:/cygdr...
++ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
++ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
++ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ ;;
++ *)
++ sys_lib_search_path_spec="$LIB"
++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++ # It is most probably a Windows format PATH.
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++ else
++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
++ fi
++ # FIXME: find the short name or the path components, as spaces are
++ # common. (e.g. "Program Files" -> "PROGRA~1")
++ ;;
++ esac
++
++ # DLL is installed to $(libdir)/../bin by postinstall_cmds
++ postinstall_cmds='base_file=`basename \${file}`~
++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++ dldir=$destdir/`dirname \$dlpath`~
++ test -d \$dldir || mkdir -p \$dldir~
++ $install_prog $dir/$dlname \$dldir/$dlname'
++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++ dlpath=$dir/\$dldll~
++ $RM \$dlpath'
++ shlibpath_overrides_runpath=yes
++ dynamic_linker='Win32 link.exe'
++ ;;
++
++ *)
++ # Assume MSVC wrapper
++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++ dynamic_linker='Win32 ld.exe'
++ ;;
++ esac
++ # FIXME: first we should search . and the directory the executable is in
++ shlibpath_var=PATH
++ ;;
++
++darwin* | rhapsody*)
++ dynamic_linker="$host_os dyld"
++ version_type=darwin
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++ soname_spec='${libname}${release}${major}$shared_ext'
++ shlibpath_overrides_runpath=yes
++ shlibpath_var=DYLD_LIBRARY_PATH
++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++m4_if([$1], [],[
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++ ;;
++
++dgux*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
++
++freebsd* | dragonfly*)
++ # DragonFly does not have aout. When/if they implement a new
++ # versioning mechanism, adjust this.
++ if test -x /usr/bin/objformat; then
++ objformat=`/usr/bin/objformat`
++ else
++ case $host_os in
++ freebsd[[23]].*) objformat=aout ;;
++ *) objformat=elf ;;
++ esac
++ fi
++ version_type=freebsd-$objformat
++ case $version_type in
++ freebsd-elf*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ need_version=no
++ need_lib_prefix=no
++ ;;
++ freebsd-*)
++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++ need_version=yes
++ ;;
++ esac
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_os in
++ freebsd2.*)
++ shlibpath_overrides_runpath=yes
++ ;;
++ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++ *) # from 4.6 on, and DragonFly
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++ esac
++ ;;
++
++gnu*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++haiku*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ dynamic_linker="$host_os runtime_loader"
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
++ hardcode_into_libs=yes
++ ;;
++
++hpux9* | hpux10* | hpux11*)
++ # Give a soname corresponding to the major version so that dld.sl refuses to
++ # link against other versions.
++ version_type=sunos
++ need_lib_prefix=no
++ need_version=no
++ case $host_cpu in
++ ia64*)
++ shrext_cmds='.so'
++ hardcode_into_libs=yes
++ dynamic_linker="$host_os dld.so"
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ if test "X$HPUX_IA64_MODE" = X32; then
++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++ else
++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++ fi
++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++ ;;
++ hppa*64*)
++ shrext_cmds='.sl'
++ hardcode_into_libs=yes
++ dynamic_linker="$host_os dld.sl"
++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++ ;;
++ *)
++ shrext_cmds='.sl'
++ dynamic_linker="$host_os dld.sl"
++ shlibpath_var=SHLIB_PATH
++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ ;;
++ esac
++ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
++ postinstall_cmds='chmod 555 $lib'
++ # or fails outright, so override atomically:
++ install_override_mode=555
++ ;;
++
++interix[[3-9]]*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++irix5* | irix6* | nonstopux*)
++ case $host_os in
++ nonstopux*) version_type=nonstopux ;;
++ *)
++ if test "$lt_cv_prog_gnu_ld" = yes; then
++ version_type=linux # correct to gnu/linux during the next big refactor
++ else
++ version_type=irix
++ fi ;;
++ esac
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++ case $host_os in
++ irix5* | nonstopux*)
++ libsuff= shlibsuff=
++ ;;
++ *)
++ case $LD in # libtool.m4 will add one of these switches to LD
++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++ libsuff= shlibsuff= libmagic=32-bit;;
++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++ libsuff=32 shlibsuff=N32 libmagic=N32;;
++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++ libsuff=64 shlibsuff=64 libmagic=64-bit;;
++ *) libsuff= shlibsuff= libmagic=never-match;;
++ esac
++ ;;
++ esac
++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++ hardcode_into_libs=yes
++ ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++ dynamic_linker=no
++ ;;
++
++# This must be glibc/ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++
++ # Some binutils ld are patched to set DT_RUNPATH
++ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
++ [lt_cv_shlibpath_overrides_runpath=no
++ save_LDFLAGS=$LDFLAGS
++ save_libdir=$libdir
++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++ [lt_cv_shlibpath_overrides_runpath=yes])])
++ LDFLAGS=$save_LDFLAGS
++ libdir=$save_libdir
++ ])
++ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
++
++ # This implies no fast_install, which is unacceptable.
++ # Some rework will be needed to allow for fast_install
++ # before this can be enabled.
++ hardcode_into_libs=yes
++
++ # Append ld.so.conf contents to the search path
++ if test -f /etc/ld.so.conf; then
++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++ fi
++
++ # We used to test for /lib/ld.so.1 and disable shared libraries on
++ # powerpc, because MkLinux only supported shared libraries with the
++ # GNU dynamic linker. Since this was broken with cross compilers,
++ # most powerpc-linux boxes support dynamic linking these days and
++ # people can always --disable-shared, the test was removed, and we
++ # assume the GNU/Linux dynamic linker is in use.
++ dynamic_linker='GNU/Linux ld.so'
++ ;;
++
++netbsdelf*-gnu)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='NetBSD ld.elf_so'
++ ;;
++
++netbsd*)
++ version_type=sunos
++ need_lib_prefix=no
++ need_version=no
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ dynamic_linker='NetBSD (a.out) ld.so'
++ else
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ dynamic_linker='NetBSD ld.elf_so'
++ fi
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ ;;
++
++newsos6)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ ;;
++
++*nto* | *qnx*)
++ version_type=qnx
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='ldqnx.so'
++ ;;
++
++openbsd*)
++ version_type=sunos
++ sys_lib_dlsearch_path_spec="/usr/lib"
++ need_lib_prefix=no
++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++ case $host_os in
++ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++ *) need_version=no ;;
++ esac
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ case $host_os in
++ openbsd2.[[89]] | openbsd2.[[89]].*)
++ shlibpath_overrides_runpath=no
++ ;;
++ *)
++ shlibpath_overrides_runpath=yes
++ ;;
++ esac
++ else
++ shlibpath_overrides_runpath=yes
++ fi
++ ;;
++
++os2*)
++ libname_spec='$name'
++ shrext_cmds=".dll"
++ need_lib_prefix=no
++ library_names_spec='$libname${shared_ext} $libname.a'
++ dynamic_linker='OS/2 ld.exe'
++ shlibpath_var=LIBPATH
++ ;;
++
++osf3* | osf4* | osf5*)
++ version_type=osf
++ need_lib_prefix=no
++ need_version=no
++ soname_spec='${libname}${release}${shared_ext}$major'
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ ;;
++
++rdos*)
++ dynamic_linker=no
++ ;;
++
++solaris*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ # ldd complains unless libraries are executable
++ postinstall_cmds='chmod +x $lib'
++ ;;
++
++sunos4*)
++ version_type=sunos
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ if test "$with_gnu_ld" = yes; then
++ need_lib_prefix=no
++ fi
++ need_version=yes
++ ;;
++
++sysv4 | sysv4.3*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ case $host_vendor in
++ sni)
++ shlibpath_overrides_runpath=no
++ need_lib_prefix=no
++ runpath_var=LD_RUN_PATH
++ ;;
++ siemens)
++ need_lib_prefix=no
++ ;;
++ motorola)
++ need_lib_prefix=no
++ need_version=no
++ shlibpath_overrides_runpath=no
++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++ ;;
++ esac
++ ;;
++
++sysv4*MP*)
++ if test -d /usr/nec ;then
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++ soname_spec='$libname${shared_ext}.$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ fi
++ ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ version_type=freebsd-elf
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=yes
++ hardcode_into_libs=yes
++ if test "$with_gnu_ld" = yes; then
++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++ else
++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++ case $host_os in
++ sco3.2v5*)
++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++ ;;
++ esac
++ fi
++ sys_lib_dlsearch_path_spec='/usr/lib'
++ ;;
++
++tpf*)
++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
++ version_type=linux # correct to gnu/linux during the next big refactor
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ ;;
++
++uts4*)
++ version_type=linux # correct to gnu/linux during the next big refactor
++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++ soname_spec='${libname}${release}${shared_ext}$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ ;;
++
++*)
++ dynamic_linker=no
++ ;;
++esac
++AC_MSG_RESULT([$dynamic_linker])
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
++fi
++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
++fi
++
++_LT_DECL([], [variables_saved_for_relink], [1],
++ [Variables whose values should be saved in libtool wrapper scripts and
++ restored at link time])
++_LT_DECL([], [need_lib_prefix], [0],
++ [Do we need the "lib" prefix for modules?])
++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
++_LT_DECL([], [version_type], [0], [Library versioning type])
++_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
++_LT_DECL([], [shlibpath_overrides_runpath], [0],
++ [Is shlibpath searched before the hard-coded library search path?])
++_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
++_LT_DECL([], [library_names_spec], [1],
++ [[List of archive names. First name is the real one, the rest are links.
++ The last name is the one that the linker finds with -lNAME]])
++_LT_DECL([], [soname_spec], [1],
++ [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [install_override_mode], [1],
++ [Permission mode override for installation of shared libraries])
++_LT_DECL([], [postinstall_cmds], [2],
++ [Command to use after installation of a shared archive])
++_LT_DECL([], [postuninstall_cmds], [2],
++ [Command to use after uninstallation of a shared archive])
++_LT_DECL([], [finish_cmds], [2],
++ [Commands used to finish a libtool library installation in a directory])
++_LT_DECL([], [finish_eval], [1],
++ [[As "finish_cmds", except a single script fragment to be evaled but
++ not shown]])
++_LT_DECL([], [hardcode_into_libs], [0],
++ [Whether we should hardcode library paths into libraries])
++_LT_DECL([], [sys_lib_search_path_spec], [2],
++ [Compile-time system search path for libraries])
++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
++ [Run-time system search path for libraries])
++])# _LT_SYS_DYNAMIC_LINKER
++
++
++# _LT_PATH_TOOL_PREFIX(TOOL)
++# --------------------------
++# find a file program which can recognize shared library
++AC_DEFUN([_LT_PATH_TOOL_PREFIX],
++[m4_require([_LT_DECL_EGREP])dnl
++AC_MSG_CHECKING([for $1])
++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
++[case $MAGIC_CMD in
++[[\\/*] | ?:[\\/]*])
++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++ ;;
++*)
++ lt_save_MAGIC_CMD="$MAGIC_CMD"
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++dnl $ac_dummy forces splitting on constant user-supplied paths.
++dnl POSIX.2 word splitting is done only on the output of word expansions,
++dnl not every word. This closes a longstanding sh security hole.
++ ac_dummy="m4_if([$2], , $PATH, [$2])"
++ for ac_dir in $ac_dummy; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f $ac_dir/$1; then
++ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
++ if test -n "$file_magic_test_file"; then
++ case $deplibs_check_method in
++ "file_magic "*)
++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++ $EGREP "$file_magic_regex" > /dev/null; then
++ :
++ else
++ cat <<_LT_EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such. This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem. Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool at gnu.org
++
++_LT_EOF
++ fi ;;
++ esac
++ fi
++ break
++ fi
++ done
++ IFS="$lt_save_ifs"
++ MAGIC_CMD="$lt_save_MAGIC_CMD"
++ ;;
++esac])
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++ AC_MSG_RESULT($MAGIC_CMD)
++else
++ AC_MSG_RESULT(no)
++fi
++_LT_DECL([], [MAGIC_CMD], [0],
++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
++])# _LT_PATH_TOOL_PREFIX
++
++# Old name:
++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
++
++
++# _LT_PATH_MAGIC
++# --------------
++# find a file program which can recognize a shared library
++m4_defun([_LT_PATH_MAGIC],
++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++ if test -n "$ac_tool_prefix"; then
++ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
++ else
++ MAGIC_CMD=:
++ fi
++fi
++])# _LT_PATH_MAGIC
++
++
++# LT_PATH_LD
++# ----------
++# find the pathname to the GNU or non-GNU linker
++AC_DEFUN([LT_PATH_LD],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
++
++AC_ARG_WITH([gnu-ld],
++ [AS_HELP_STRING([--with-gnu-ld],
++ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
++ [test "$withval" = no || with_gnu_ld=yes],
++ [with_gnu_ld=no])dnl
++
++ac_prog=ld
++if test "$GCC" = yes; then
++ # Check if gcc -print-prog-name=ld gives a path.
++ AC_MSG_CHECKING([for ld used by $CC])
++ case $host in
++ *-*-mingw*)
++ # gcc leaves a trailing carriage return which upsets mingw
++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++ *)
++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++ esac
++ case $ac_prog in
++ # Accept absolute paths.
++ [[\\/]]* | ?:[[\\/]]*)
++ re_direlt='/[[^/]][[^/]]*/\.\./'
++ # Canonicalize the pathname of ld
++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
++ done
++ test -z "$LD" && LD="$ac_prog"
++ ;;
++ "")
++ # If it fails, then pretend we aren't using GCC.
++ ac_prog=ld
++ ;;
++ *)
++ # If it is relative, then search for the first ld in PATH.
++ with_gnu_ld=unknown
++ ;;
++ esac
++elif test "$with_gnu_ld" = yes; then
++ AC_MSG_CHECKING([for GNU ld])
++else
++ AC_MSG_CHECKING([for non-GNU ld])
++fi
++AC_CACHE_VAL(lt_cv_path_LD,
++[if test -z "$LD"; then
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++ lt_cv_path_LD="$ac_dir/$ac_prog"
++ # Check to see if the program is GNU ld. I'd rather use --version,
++ # but apparently some variants of GNU ld only accept -v.
++ # Break only if it was the GNU/non-GNU ld that we prefer.
++ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++ *GNU* | *'with BFD'*)
++ test "$with_gnu_ld" != no && break
++ ;;
++ *)
++ test "$with_gnu_ld" != yes && break
++ ;;
++ esac
++ fi
++ done
++ IFS="$lt_save_ifs"
++else
++ lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi])
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++ AC_MSG_RESULT($LD)
++else
++ AC_MSG_RESULT(no)
++fi
++test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
++_LT_PATH_LD_GNU
++AC_SUBST([LD])
++
++_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
++])# LT_PATH_LD
++
++# Old names:
++AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
++AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_PROG_LD], [])
++dnl AC_DEFUN([AC_PROG_LD], [])
++
++
++# _LT_PATH_LD_GNU
++#- --------------
++m4_defun([_LT_PATH_LD_GNU],
++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++ lt_cv_prog_gnu_ld=yes
++ ;;
++*)
++ lt_cv_prog_gnu_ld=no
++ ;;
++esac])
++with_gnu_ld=$lt_cv_prog_gnu_ld
++])# _LT_PATH_LD_GNU
++
++
++# _LT_CMD_RELOAD
++# --------------
++# find reload flag for linker
++# -- PORTME Some linkers may need a different reload flag.
++m4_defun([_LT_CMD_RELOAD],
++[AC_CACHE_CHECK([for $LD option to reload object files],
++ lt_cv_ld_reload_flag,
++ [lt_cv_ld_reload_flag='-r'])
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ if test "$GCC" != yes; then
++ reload_cmds=false
++ fi
++ ;;
++ darwin*)
++ if test "$GCC" = yes; then
++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++ else
++ reload_cmds='$LD$reload_flag -o $output$reload_objs'
++ fi
++ ;;
++esac
++_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_TAGDECL([], [reload_cmds], [2])dnl
++])# _LT_CMD_RELOAD
++
++
++# _LT_CHECK_MAGIC_METHOD
++# ----------------------
++# how to check for library dependencies
++# -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_MAGIC_METHOD],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++AC_CACHE_CHECK([how to recognize dependent libraries],
++lt_cv_deplibs_check_method,
++[lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix[[4-9]]*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++beos*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++bsdi[[45]]*)
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
++ lt_cv_file_magic_cmd='/usr/bin/file -L'
++ lt_cv_file_magic_test_file=/shlib/libc.so
++ ;;
++
++cygwin*)
++ # func_win32_libid is a shell function defined in ltmain.sh
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ ;;
++
++mingw* | pw32*)
++ # Base MSYS/MinGW do not provide the 'file' command needed by
++ # func_win32_libid shell function, so use a weaker test based on 'objdump',
++ # unless we find 'file', for example because we are cross-compiling.
++ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
++ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++ lt_cv_file_magic_cmd='func_win32_libid'
++ else
++ # Keep this pattern in sync with the one in func_win32_libid.
++ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
++ fi
++ ;;
++
++cegcc*)
++ # use the weaker test based on 'objdump'. See mingw*.
++ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
++ lt_cv_file_magic_cmd='$OBJDUMP -f'
++ ;;
++
++darwin* | rhapsody*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++freebsd* | dragonfly*)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++ case $host_cpu in
++ i*86 )
++ # Not sure whether the presence of OpenBSD here was a mistake.
++ # Let's accept both of them until this is cleared up.
++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++ ;;
++ esac
++ else
++ lt_cv_deplibs_check_method=pass_all
++ fi
++ ;;
++
++gnu*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++haiku*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++hpux10.20* | hpux11*)
++ lt_cv_file_magic_cmd=/usr/bin/file
++ case $host_cpu in
++ ia64*)
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++ ;;
++ hppa*64*)
++ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++ ;;
++ *)
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
++ lt_cv_file_magic_test_file=/usr/lib/libc.sl
++ ;;
++ esac
++ ;;
++
++interix[[3-9]]*)
++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
++ ;;
++
++irix5* | irix6* | nonstopux*)
++ case $LD in
++ *-32|*"-32 ") libmagic=32-bit;;
++ *-n32|*"-n32 ") libmagic=N32;;
++ *-64|*"-64 ") libmagic=64-bit;;
++ *) libmagic=never-match;;
++ esac
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++# This must be glibc/ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++ else
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
++ fi
++ ;;
++
++newos6*)
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=/usr/lib/libnls.so
++ ;;
++
++*nto* | *qnx*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++openbsd*)
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
++ else
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++ fi
++ ;;
++
++osf3* | osf4* | osf5*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++rdos*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++solaris*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++
++sysv4 | sysv4.3*)
++ case $host_vendor in
++ motorola)
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++ ;;
++ ncr)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ sequent)
++ lt_cv_file_magic_cmd='/bin/file'
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
++ ;;
++ sni)
++ lt_cv_file_magic_cmd='/bin/file'
++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
++ lt_cv_file_magic_test_file=/lib/libc.so
++ ;;
++ siemens)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ pc)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++ esac
++ ;;
++
++tpf*)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
++esac
++])
++
++file_magic_glob=
++want_nocaseglob=no
++if test "$build" = "$host"; then
++ case $host_os in
++ mingw* | pw32*)
++ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
++ want_nocaseglob=yes
++ else
++ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
++ fi
++ ;;
++ esac
++fi
++
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++
++_LT_DECL([], [deplibs_check_method], [1],
++ [Method to check whether dependent libraries are shared objects])
++_LT_DECL([], [file_magic_cmd], [1],
++ [Command to use when deplibs_check_method = "file_magic"])
++_LT_DECL([], [file_magic_glob], [1],
++ [How to find potential files when deplibs_check_method = "file_magic"])
++_LT_DECL([], [want_nocaseglob], [1],
++ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
++])# _LT_CHECK_MAGIC_METHOD
++
++
++# LT_PATH_NM
++# ----------
++# find the pathname to a BSD- or MS-compatible name lister
++AC_DEFUN([LT_PATH_NM],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
++[if test -n "$NM"; then
++ # Let the user override the test.
++ lt_cv_path_NM="$NM"
++else
++ lt_nm_to_check="${ac_tool_prefix}nm"
++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++ lt_nm_to_check="$lt_nm_to_check nm"
++ fi
++ for lt_tmp_nm in $lt_nm_to_check; do
++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++ IFS="$lt_save_ifs"
++ test -z "$ac_dir" && ac_dir=.
++ tmp_nm="$ac_dir/$lt_tmp_nm"
++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++ # Check to see if the nm accepts a BSD-compat flag.
++ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
++ # nm: unknown option "B" ignored
++ # Tru64's nm complains that /dev/null is an invalid object file
++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++ */dev/null* | *'Invalid file or object type'*)
++ lt_cv_path_NM="$tmp_nm -B"
++ break
++ ;;
++ *)
++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++ */dev/null*)
++ lt_cv_path_NM="$tmp_nm -p"
++ break
++ ;;
++ *)
++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++ continue # so that we can try to find one that supports BSD flags
++ ;;
++ esac
++ ;;
++ esac
++ fi
++ done
++ IFS="$lt_save_ifs"
++ done
++ : ${lt_cv_path_NM=no}
++fi])
++if test "$lt_cv_path_NM" != "no"; then
++ NM="$lt_cv_path_NM"
++else
++ # Didn't find any BSD compatible name lister, look for dumpbin.
++ if test -n "$DUMPBIN"; then :
++ # Let the user override the test.
++ else
++ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
++ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
++ *COFF*)
++ DUMPBIN="$DUMPBIN -symbols"
++ ;;
++ *)
++ DUMPBIN=:
++ ;;
++ esac
++ fi
++ AC_SUBST([DUMPBIN])
++ if test "$DUMPBIN" != ":"; then
++ NM="$DUMPBIN"
++ fi
++fi
++test -z "$NM" && NM=nm
++AC_SUBST([NM])
++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
++
++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
++ [lt_cv_nm_interface="BSD nm"
++ echo "int some_variable = 0;" > conftest.$ac_ext
++ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$ac_compile" 2>conftest.err)
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
++ cat conftest.out >&AS_MESSAGE_LOG_FD
++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
++ lt_cv_nm_interface="MS dumpbin"
++ fi
++ rm -f conftest*])
++])# LT_PATH_NM
++
++# Old names:
++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_PROG_NM], [])
++dnl AC_DEFUN([AC_PROG_NM], [])
++
++# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++# --------------------------------
++# how to determine the name of the shared library
++# associated with a specific link library.
++# -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++m4_require([_LT_DECL_DLLTOOL])
++AC_CACHE_CHECK([how to associate runtime and link libraries],
++lt_cv_sharedlib_from_linklib_cmd,
++[lt_cv_sharedlib_from_linklib_cmd='unknown'
++
++case $host_os in
++cygwin* | mingw* | pw32* | cegcc*)
++ # two different shell functions defined in ltmain.sh
++ # decide which to use based on capabilities of $DLLTOOL
++ case `$DLLTOOL --help 2>&1` in
++ *--identify-strict*)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
++ ;;
++ *)
++ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
++ ;;
++ esac
++ ;;
++*)
++ # fallback: assume linklib IS sharedlib
++ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
++ ;;
++esac
++])
++sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
++test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
++
++_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
++ [Command to associate shared and link libraries])
++])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
++
++
++# _LT_PATH_MANIFEST_TOOL
++# ----------------------
++# locate the manifest tool
++m4_defun([_LT_PATH_MANIFEST_TOOL],
++[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
++test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
++AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
++ [lt_cv_path_mainfest_tool=no
++ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
++ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
++ cat conftest.err >&AS_MESSAGE_LOG_FD
++ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
++ lt_cv_path_mainfest_tool=yes
++ fi
++ rm -f conftest*])
++if test "x$lt_cv_path_mainfest_tool" != xyes; then
++ MANIFEST_TOOL=:
++fi
++_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
++])# _LT_PATH_MANIFEST_TOOL
++
++
++# LT_LIB_M
++# --------
++# check for math library
++AC_DEFUN([LT_LIB_M],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
++ # These system don't have libm, or don't need it
++ ;;
++*-ncr-sysv4.3*)
++ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++ ;;
++*)
++ AC_CHECK_LIB(m, cos, LIBM="-lm")
++ ;;
++esac
++AC_SUBST([LIBM])
++])# LT_LIB_M
++
++# Old name:
++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_CHECK_LIBM], [])
++
++
++# _LT_COMPILER_NO_RTTI([TAGNAME])
++# -------------------------------
++m4_defun([_LT_COMPILER_NO_RTTI],
++[m4_require([_LT_TAG_COMPILER])dnl
++
++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++
++if test "$GCC" = yes; then
++ case $cc_basename in
++ nvcc*)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
++ esac
++
++ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
++ lt_cv_prog_compiler_rtti_exceptions,
++ [-fno-rtti -fno-exceptions], [],
++ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
++fi
++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
++ [Compiler flag to turn off builtin functions])
++])# _LT_COMPILER_NO_RTTI
++
++
++# _LT_CMD_GLOBAL_SYMBOLS
++# ----------------------
++m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++AC_MSG_CHECKING([command to parse $NM output from $compiler object])
++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
++[
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix. What could be older than Ultrix?!! ;)]
++
++# Character class describing NM global symbol codes.
++symcode='[[BCDEGRST]]'
++
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
++
++# Define system-specific variables.
++case $host_os in
++aix*)
++ symcode='[[BCDT]]'
++ ;;
++cygwin* | mingw* | pw32* | cegcc*)
++ symcode='[[ABCDGISTW]]'
++ ;;
++hpux*)
++ if test "$host_cpu" = ia64; then
++ symcode='[[ABCDEGRST]]'
++ fi
++ ;;
++irix* | nonstopux*)
++ symcode='[[BCDEGRST]]'
++ ;;
++osf*)
++ symcode='[[BCDEGQRST]]'
++ ;;
++solaris*)
++ symcode='[[BDRT]]'
++ ;;
++sco3.2v5*)
++ symcode='[[DT]]'
++ ;;
++sysv4.2uw2*)
++ symcode='[[DT]]'
++ ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++ symcode='[[ABDT]]'
++ ;;
++sysv4)
++ symcode='[[DFNSTU]]'
++ ;;
++esac
++
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++ symcode='[[ABCDGIRSTW]]' ;;
++esac
++
++# Transform an extracted symbol line into a proper C declaration.
++# Some systems (esp. on ia64) link data and code symbols differently,
++# so use this general approach.
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
++
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++ ;;
++esac
++
++# Try without a prefix underscore, then with it.
++for ac_symprfx in "" "_"; do
++
++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++ symxfrm="\\1 $ac_symprfx\\2 \\2"
++
++ # Write the raw and C identifiers.
++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ # Fake it for dumpbin and say T for any non-static function
++ # and D for any global variable.
++ # Also find C++ and __fastcall symbols from MSVC++,
++ # which start with @ or ?.
++ lt_cv_sys_global_symbol_pipe="$AWK ['"\
++" {last_section=section; section=\$ 3};"\
++" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
++" \$ 0!~/External *\|/{next};"\
++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
++" {if(hide[section]) next};"\
++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
++" s[1]~/^[@?]/{print s[1], s[1]; next};"\
++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
++" ' prfx=^$ac_symprfx]"
++ else
++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++ fi
++ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
++
++ # Check to see that the pipe works correctly.
++ pipe_works=no
++
++ rm -f conftest*
++ cat > conftest.$ac_ext <<_LT_EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(void);
++void nm_test_func(void){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++_LT_EOF
++
++ if AC_TRY_EVAL(ac_compile); then
++ # Now try to grab the symbols.
++ nlist=conftest.nm
++ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
++ # Try sorting and uniquifying the output.
++ if sort "$nlist" | uniq > "$nlist"T; then
++ mv -f "$nlist"T "$nlist"
++ else
++ rm -f "$nlist"T
++ fi
++
++ # Make sure that we snagged all the symbols we need.
++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
++ cat <<_LT_EOF > conftest.$ac_ext
++/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
++#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
++/* DATA imports from DLLs on WIN32 con't be const, because runtime
++ relocations are performed -- see ld's documentation on pseudo-relocs. */
++# define LT@&t at _DLSYM_CONST
++#elif defined(__osf__)
++/* This system does not cope well with relocations in const data. */
++# define LT@&t at _DLSYM_CONST
++#else
++# define LT@&t at _DLSYM_CONST const
++#endif
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++_LT_EOF
++ # Now generate the symbol file.
++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
++
++ cat <<_LT_EOF >> conftest.$ac_ext
++
++/* The mapping between symbol names and symbols. */
++LT@&t at _DLSYM_CONST struct {
++ const char *name;
++ void *address;
++}
++lt__PROGRAM__LTX_preloaded_symbols[[]] =
++{
++ { "@PROGRAM@", (void *) 0 },
++_LT_EOF
++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
++ cat <<\_LT_EOF >> conftest.$ac_ext
++ {0, (void *) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++ return lt__PROGRAM__LTX_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++_LT_EOF
++ # Now try linking the two files.
++ mv conftest.$ac_objext conftstm.$ac_objext
++ lt_globsym_save_LIBS=$LIBS
++ lt_globsym_save_CFLAGS=$CFLAGS
++ LIBS="conftstm.$ac_objext"
++ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
++ pipe_works=yes
++ fi
++ LIBS=$lt_globsym_save_LIBS
++ CFLAGS=$lt_globsym_save_CFLAGS
++ else
++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
++ fi
++ else
++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
++ fi
++ else
++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
++ fi
++ else
++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
++ cat conftest.$ac_ext >&5
++ fi
++ rm -rf conftest* conftst*
++
++ # Do not use the global_symbol_pipe unless it works.
++ if test "$pipe_works" = yes; then
++ break
++ else
++ lt_cv_sys_global_symbol_pipe=
++ fi
++done
++])
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++ lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++ AC_MSG_RESULT(failed)
++else
++ AC_MSG_RESULT(ok)
++fi
++
++# Response file support.
++if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++ nm_file_list_spec='@'
++elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
++ nm_file_list_spec='@'
++fi
++
++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
++ [Take the output of nm and produce a listing of raw symbols and C names])
++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
++ [Transform the output of nm in a proper C declaration])
++_LT_DECL([global_symbol_to_c_name_address],
++ [lt_cv_sys_global_symbol_to_c_name_address], [1],
++ [Transform the output of nm in a C name address pair])
++_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
++ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
++ [Transform the output of nm in a C name address pair when lib prefix is needed])
++_LT_DECL([], [nm_file_list_spec], [1],
++ [Specify filename containing input files for $NM])
++]) # _LT_CMD_GLOBAL_SYMBOLS
++
++
++# _LT_COMPILER_PIC([TAGNAME])
++# ---------------------------
++m4_defun([_LT_COMPILER_PIC],
++[m4_require([_LT_TAG_COMPILER])dnl
++_LT_TAGVAR(lt_prog_compiler_wl, $1)=
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=
++_LT_TAGVAR(lt_prog_compiler_static, $1)=
++
++m4_if([$1], [CXX], [
++ # C++ specific cases for pic, static, wl, etc.
++ if test "$GXX" = yes; then
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++ case $host_os in
++ aix*)
++ # All AIX code is PIC.
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ m68k)
++ # FIXME: we need at least 68020 code to build shared libraries, but
++ # adding the `-m68020' flag to GCC prevents building anything better,
++ # like `-m68040'.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++ ;;
++ esac
++ ;;
++
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++ # PIC is the default for these OSes.
++ ;;
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ # Although the cygwin gcc ignores -fPIC, still need this for old-style
++ # (--disable-auto-import) libraries
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
++ darwin* | rhapsody*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++ ;;
++ *djgpp*)
++ # DJGPP does not support shared libraries at all
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++ ;;
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
++ interix[[3-9]]*)
++ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++ # Instead, we relocate shared libraries at runtime.
++ ;;
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++ fi
++ ;;
++ hpux*)
++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
++ # sets the default TLS model and affects inlining.
++ case $host_cpu in
++ hppa*64*)
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ esac
++ ;;
++ *qnx* | *nto*)
++ # QNX uses GNU C++, but need to define -shared option too, otherwise
++ # it will coredump.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ esac
++ else
++ case $host_os in
++ aix[[4-9]]*)
++ # All AIX code is PIC.
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ else
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++ fi
++ ;;
++ chorus*)
++ case $cc_basename in
++ cxch68*)
++ # Green Hills C++ Compiler
++ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
++ ;;
++ esac
++ ;;
++ mingw* | cygwin* | os2* | pw32* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
++ dgux*)
++ case $cc_basename in
++ ec++*)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ ;;
++ ghcx*)
++ # Green Hills C++ Compiler
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ freebsd* | dragonfly*)
++ # FreeBSD uses GNU C++
++ ;;
++ hpux9* | hpux10* | hpux11*)
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++ if test "$host_cpu" != ia64; then
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++ fi
++ ;;
++ aCC*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++ case $host_cpu in
++ hppa*64*|ia64*)
++ # +Z the default
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++ ;;
++ esac
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ interix*)
++ # This is c89, which is MS Visual C++ (no shared libs)
++ # Anyone wants to do a port?
++ ;;
++ irix5* | irix6* | nonstopux*)
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ # CC pic flag -KPIC is the default.
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ case $cc_basename in
++ KCC*)
++ # KAI C++ Compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ ecpc* )
++ # old Intel C++ for x86_64 which still supported -KPIC.
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ ;;
++ icpc* )
++ # Intel C++, used to be incompatible with GCC.
++ # ICC 10 doesn't accept -KPIC any more.
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ ;;
++ pgCC* | pgcpp*)
++ # Portland Group C++ compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ cxx*)
++ # Compaq C++
++ # Make sure the PIC flag is empty. It appears that all Alpha
++ # Linux and Compaq Tru64 Unix objects are PIC.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
++ # IBM XL 8.0, 9.0 on PPC and BlueGene
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++ lynxos*)
++ ;;
++ m88k*)
++ ;;
++ mvs*)
++ case $cc_basename in
++ cxx*)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ netbsd* | netbsdelf*-gnu)
++ ;;
++ *qnx* | *nto*)
++ # QNX uses GNU C++, but need to define -shared option too, otherwise
++ # it will coredump.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++ ;;
++ osf3* | osf4* | osf5*)
++ case $cc_basename in
++ KCC*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++ ;;
++ RCC*)
++ # Rational C++ 2.4.1
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++ ;;
++ cxx*)
++ # Digital/Compaq C++
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # Make sure the PIC flag is empty. It appears that all Alpha
++ # Linux and Compaq Tru64 Unix objects are PIC.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ psos*)
++ ;;
++ solaris*)
++ case $cc_basename in
++ CC* | sunCC*)
++ # Sun C++ 4.2, 5.x and Centerline C++
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++ ;;
++ gcx*)
++ # Green Hills C++ Compiler
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ sunos4*)
++ case $cc_basename in
++ CC*)
++ # Sun C++ 4.x
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ lcc*)
++ # Lucid
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ esac
++ ;;
++ tandem*)
++ case $cc_basename in
++ NCC*)
++ # NonStop-UX NCC 3.20
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ ;;
++ *)
++ ;;
++ esac
++ ;;
++ vxworks*)
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++ esac
++ fi
++],
++[
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++ case $host_os in
++ aix*)
++ # All AIX code is PIC.
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ m68k)
++ # FIXME: we need at least 68020 code to build shared libraries, but
++ # adding the `-m68020' flag to GCC prevents building anything better,
++ # like `-m68040'.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++ ;;
++ esac
++ ;;
++
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++ # PIC is the default for these OSes.
++ ;;
++
++ mingw* | cygwin* | pw32* | os2* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ # Although the cygwin gcc ignores -fPIC, still need this for old-style
++ # (--disable-auto-import) libraries
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
++
++ darwin* | rhapsody*)
++ # PIC is the default on this platform
++ # Common symbols not allowed in MH_DYLIB files
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++ ;;
++
++ haiku*)
++ # PIC is the default for Haiku.
++ # The "-static" flag exists, but is broken.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)=
++ ;;
++
++ hpux*)
++ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
++ # sets the default TLS model and affects inlining.
++ case $host_cpu in
++ hppa*64*)
++ # +Z the default
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ esac
++ ;;
++
++ interix[[3-9]]*)
++ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++ # Instead, we relocate shared libraries at runtime.
++ ;;
++
++ msdosdjgpp*)
++ # Just because we use GCC doesn't mean we suddenly get shared libraries
++ # on systems that don't support them.
++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ enable_shared=no
++ ;;
++
++ *nto* | *qnx*)
++ # QNX uses GNU C++, but need to define -shared option too, otherwise
++ # it will coredump.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++ fi
++ ;;
++
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ ;;
++ esac
++
++ case $cc_basename in
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
++ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
++ fi
++ ;;
++ esac
++ else
++ # PORTME Check for flag to pass linker flags through the system compiler.
++ case $host_os in
++ aix*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ if test "$host_cpu" = ia64; then
++ # AIX 5 now supports IA64 processor
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ else
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++ fi
++ ;;
++
++ mingw* | cygwin* | pw32* | os2* | cegcc*)
++ # This hack is so that the source file can tell whether it is being
++ # built for inclusion in a dll (and should export symbols for example).
++ m4_if([$1], [GCJ], [],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++ ;;
++
++ hpux9* | hpux10* | hpux11*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++ # not for PA HP-UX.
++ case $host_cpu in
++ hppa*64*|ia64*)
++ # +Z the default
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++ ;;
++ esac
++ # Is there a better lt_prog_compiler_static that works with the bundled CC?
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++ ;;
++
++ irix5* | irix6* | nonstopux*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # PIC (with -KPIC) is the default.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ case $cc_basename in
++ # old Intel for x86_64 which still supported -KPIC.
++ ecc*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ ;;
++ # icc used to be incompatible with GCC.
++ # ICC 10 doesn't accept -KPIC any more.
++ icc* | ifort*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ ;;
++ # Lahey Fortran 8.1.
++ lf95*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
++ ;;
++ nagfor*)
++ # NAG Fortran compiler
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group compilers (*not* the Pentium gcc compiler,
++ # which looks to be a dead project)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ ccc*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # All Alpha code is PIC.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++ xl* | bgxl* | bgf* | mpixl*)
++ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
++ # Sun Fortran 8.3 passes all unrecognized flags to the linker
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++ ;;
++ *Sun\ F* | *Sun*Fortran*)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++ ;;
++ *Sun\ C*)
++ # Sun C 5.9
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ ;;
++ *Intel*\ [[CF]]*Compiler*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++ ;;
++ *Portland\ Group*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++
++ newsos6)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ *nto* | *qnx*)
++ # QNX uses GNU C++, but need to define -shared option too, otherwise
++ # it will coredump.
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++ ;;
++
++ osf3* | osf4* | osf5*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ # All OSF/1 code is PIC.
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++
++ rdos*)
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++ ;;
++
++ solaris*)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ case $cc_basename in
++ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
++ esac
++ ;;
++
++ sunos4*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ sysv4 | sysv4.2uw2* | sysv4.3*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec ;then
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ fi
++ ;;
++
++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ unicos*)
++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++
++ uts4*)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++ ;;
++
++ *)
++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++ ;;
++ esac
++ fi
++])
++case $host_os in
++ # For platforms which do not support PIC, -DPIC is meaningless:
++ *djgpp*)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++ ;;
++ *)
++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
++ ;;
++esac
++
++AC_CACHE_CHECK([for $compiler option to produce PIC],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
++ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
++ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
++ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t at m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
++ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
++ "" | " "*) ;;
++ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
++ esac],
++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
++fi
++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
++ [Additional compiler flags for building library objects])
++
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++ [How to pass a linker flag through the compiler])
++#
++# Check to make sure the static flag actually works.
++#
++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
++ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
++ $lt_tmp_static_flag,
++ [],
++ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
++ [Compiler flag to prevent dynamic linking])
++])# _LT_COMPILER_PIC
++
++
++# _LT_LINKER_SHLIBS([TAGNAME])
++# ----------------------------
++# See if the linker supports building shared libraries.
++m4_defun([_LT_LINKER_SHLIBS],
++[AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++m4_if([$1], [CXX], [
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++ case $host_os in
++ aix[[4-9]]*)
++ # If we're using GNU nm, then we don't want the "-C" option.
++ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global defined
++ # symbols, whereas GNU nm marks them as "W".
++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ else
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ fi
++ ;;
++ pw32*)
++ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
++ ;;
++ cygwin* | mingw* | cegcc*)
++ case $cc_basename in
++ cl*)
++ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
++ ;;
++ *)
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++ ;;
++ esac
++ ;;
++ linux* | k*bsd*-gnu | gnu*)
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ ;;
++ *)
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ ;;
++ esac
++], [
++ runpath_var=
++ _LT_TAGVAR(allow_undefined_flag, $1)=
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(archive_cmds, $1)=
++ _LT_TAGVAR(archive_expsym_cmds, $1)=
++ _LT_TAGVAR(compiler_needs_object, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(hardcode_automatic, $1)=no
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=
++ _LT_TAGVAR(hardcode_minus_L, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++ _LT_TAGVAR(inherit_rpath, $1)=no
++ _LT_TAGVAR(link_all_deplibs, $1)=unknown
++ _LT_TAGVAR(module_cmds, $1)=
++ _LT_TAGVAR(module_expsym_cmds, $1)=
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
++ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
++ _LT_TAGVAR(thread_safe_flag_spec, $1)=
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ # include_expsyms should be a list of space-separated symbols to be *always*
++ # included in the symbol list
++ _LT_TAGVAR(include_expsyms, $1)=
++ # exclude_expsyms can be an extended regexp of symbols to exclude
++ # it will be wrapped by ` (' and `)$', so one must not match beginning or
++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++ # as well as any symbol that contains `d'.
++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++ # platforms (ab)use it in PIC code, but their linkers get confused if
++ # the symbol is explicitly referenced. Since portable code cannot
++ # rely on this symbol name, it's probably fine to never include it in
++ # preloaded symbol tables.
++ # Exclude shared library initialization/finalization symbols.
++dnl Note also adjust exclude_expsyms for C++ above.
++ extract_expsyms_cmds=
++
++ case $host_os in
++ cygwin* | mingw* | pw32* | cegcc*)
++ # FIXME: the MSVC++ port hasn't been tested in a loooong time
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ if test "$GCC" != yes; then
++ with_gnu_ld=no
++ fi
++ ;;
++ interix*)
++ # we just hope/assume this is gcc and not c89 (= MSVC++)
++ with_gnu_ld=yes
++ ;;
++ openbsd*)
++ with_gnu_ld=no
++ ;;
++ linux* | k*bsd*-gnu | gnu*)
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ ;;
++ esac
++
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++
++ # On some targets, GNU ld is compatible enough with the native linker
++ # that we're better off using the native interface for both.
++ lt_use_gnu_ld_interface=no
++ if test "$with_gnu_ld" = yes; then
++ case $host_os in
++ aix*)
++ # The AIX port of GNU ld has always aspired to compatibility
++ # with the native linker. However, as the warning in the GNU ld
++ # block says, versions before 2.19.5* couldn't really create working
++ # shared libraries, regardless of the interface used.
++ case `$LD -v 2>&1` in
++ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
++ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
++ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ ;;
++ *)
++ lt_use_gnu_ld_interface=yes
++ ;;
++ esac
++ fi
++
++ if test "$lt_use_gnu_ld_interface" = yes; then
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ wlarc='${wl}'
++
++ # Set some defaults for GNU ld with shared library support. These
++ # are reset later if shared libraries are not supported. Putting them
++ # here allows them to be overridden if necessary.
++ runpath_var=LD_RUN_PATH
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ supports_anon_versioning=no
++ case `$LD -v 2>&1` in
++ *GNU\ gold*) supports_anon_versioning=yes ;;
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++ *\ 2.11.*) ;; # other 2.11 versions
++ *) supports_anon_versioning=yes ;;
++ esac
++
++ # See if GNU ld supports shared libraries.
++ case $host_os in
++ aix[[3-9]]*)
++ # On AIX/PPC, the GNU linker is very broken
++ if test "$host_cpu" != ia64; then
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.19, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support. If you
++*** really care for shared libraries, you may want to install binutils
++*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
++*** You will then need to restart the configuration process.
++
++_LT_EOF
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)=''
++ ;;
++ m68k)
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ ;;
++ esac
++ ;;
++
++ beos*)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ cygwin* | mingw* | pw32* | cegcc*)
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
++ interix[[3-9]]*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++
++ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++ tmp_diet=no
++ if test "$host_os" = linux-dietlibc; then
++ case $cc_basename in
++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
++ esac
++ fi
++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
++ && test "$tmp_diet" = no
++ then
++ tmp_addflag=' $pic_flag'
++ tmp_sharedflag='-shared'
++ case $cc_basename,$host_cpu in
++ pgcc*) # Portland Group C compiler
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag'
++ ;;
++ pgf77* | pgf90* | pgf95* | pgfortran*)
++ # Portland Group f77 and f90 compilers
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ tmp_addflag=' $pic_flag -Mnomain' ;;
++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
++ tmp_addflag=' -i_dynamic' ;;
++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
++ tmp_addflag=' -i_dynamic -nofor_main' ;;
++ ifc* | ifort*) # Intel Fortran compiler
++ tmp_addflag=' -nofor_main' ;;
++ lf95*) # Lahey Fortran 8.1
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ tmp_sharedflag='--shared' ;;
++ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
++ tmp_sharedflag='-qmkshrobj'
++ tmp_addflag= ;;
++ nvcc*) # Cuda Compiler Driver 2.2
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++ ;;
++ esac
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*) # Sun C 5.9
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++ tmp_sharedflag='-G' ;;
++ *Sun\ F*) # Sun Fortran 8.3
++ tmp_sharedflag='-G' ;;
++ esac
++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++ if test "x$supports_anon_versioning" = xyes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++
++ case $cc_basename in
++ xlf* | bgf* | bgxlf* | mpixlf*)
++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
++ if test "x$supports_anon_versioning" = xyes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++ fi
++ ;;
++ esac
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++ wlarc=
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ fi
++ ;;
++
++ solaris*)
++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++ case `$LD -v 2>&1` in
++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems. Therefore, libtool
++*** is disabling shared libraries support. We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++ ;;
++ *)
++ # For security reasons, it is highly recommended that you always
++ # use absolute paths for naming shared libraries, and exclude the
++ # DT_RUNPATH tag from executables and libraries. But doing so
++ # requires that you compile everything twice, which is a pain.
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ sunos4*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ wlarc=
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ *)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++
++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
++ runpath_var=
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ else
++ # PORTME fill in a description of your system's linker (not GNU ld)
++ case $host_os in
++ aix3*)
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++ # Note: this linker hardcodes the directories in LIBPATH if there
++ # are no directories specified by -L.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++ # Neither direct hardcoding nor static linking is supported with a
++ # broken collect2.
++ _LT_TAGVAR(hardcode_direct, $1)=unsupported
++ fi
++ ;;
++
++ aix[[4-9]]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ # If we're using GNU nm, then we don't want the "-C" option.
++ # -C means demangle to AIX nm, but means don't demangle with GNU nm
++ # Also, AIX nm treats weak defined symbols like other global
++ # defined symbols, whereas GNU nm marks them as "W".
++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ else
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++ fi
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++ for ld_flag in $LDFLAGS; do
++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++ aix_use_runtimelinking=yes
++ break
++ fi
++ done
++ ;;
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++ _LT_TAGVAR(archive_cmds, $1)=''
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++ if test "$GCC" = yes; then
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" &&
++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ _LT_TAGVAR(hardcode_direct, $1)=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=
++ fi
++ ;;
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ _LT_TAGVAR(link_all_deplibs, $1)=no
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
++
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to export.
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ _LT_SYS_MODULE_PATH_AIX([$1])
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ else
++ if test "$host_cpu" = ia64; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ _LT_SYS_MODULE_PATH_AIX([$1])
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ # This is similar to how AIX traditionally builds its shared libraries.
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
++ fi
++ ;;
++
++ amigaos*)
++ case $host_cpu in
++ powerpc)
++ # see comment about AmigaOS4 .so support
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)=''
++ ;;
++ m68k)
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ ;;
++ esac
++ ;;
++
++ bsdi[[45]]*)
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
++ ;;
++
++ cygwin* | mingw* | pw32* | cegcc*)
++ # When not using gcc, we currently assume that we are using
++ # Microsoft Visual C++.
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ case $cc_basename in
++ cl*)
++ # Native MSVC
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # Assume MSVC wrapper
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
++ # The linker will automatically build a .lib file if we build a DLL.
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ # FIXME: Should let the user specify the lib program.
++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ ;;
++ esac
++ ;;
++
++ darwin* | rhapsody*)
++ _LT_DARWIN_LINKER_FEATURES($1)
++ ;;
++
++ dgux*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++ # support. Future versions do this automatically, but an explicit c++rt0.o
++ # does not break anything, and helps significantly (at the cost of a little
++ # extra space).
++ freebsd2.2*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++ freebsd2.*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++ freebsd* | dragonfly*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ hpux9*)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ ;;
++
++ hpux10*)
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ fi
++ ;;
++
++ hpux11*)
++ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ else
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ m4_if($1, [], [
++ # Older versions of the 11.00 compiler do not understand -b yet
++ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
++ _LT_LINKER_OPTION([if $CC understands -b],
++ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
++ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
++ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
++ ;;
++ esac
++ fi
++ if test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ case $host_cpu in
++ hppa*64*|ia64*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++ *)
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++ # hardcode_minus_L: Not really in the search PATH,
++ # but as the default location of the library.
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ ;;
++ esac
++ fi
++ ;;
++
++ irix5* | irix6* | nonstopux*)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ # Try to use the -exported_symbol ld option, if it does not
++ # work, assume that -exports_file does not work either and
++ # implicitly export all symbols.
++ # This should be the same for all languages, so no per-tag cache variable.
++ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
++ [lt_cv_irix_exported_symbol],
++ [save_LDFLAGS="$LDFLAGS"
++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++ AC_LINK_IFELSE(
++ [AC_LANG_SOURCE(
++ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
++ [C++], [[int foo (void) { return 0; }]],
++ [Fortran 77], [[
++ subroutine foo
++ end]],
++ [Fortran], [[
++ subroutine foo
++ end]])])],
++ [lt_cv_irix_exported_symbol=yes],
++ [lt_cv_irix_exported_symbol=no])
++ LDFLAGS="$save_LDFLAGS"])
++ if test "$lt_cv_irix_exported_symbol" = yes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++ fi
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(inherit_rpath, $1)=yes
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
++ netbsd* | netbsdelf*-gnu)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
++ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ newsos6)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ *nto* | *qnx*)
++ ;;
++
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ else
++ case $host_os in
++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ os2*)
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++ ;;
++
++ osf3*)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ ;;
++
++ osf4* | osf5*) # as osf3* with the addition of -msym flag
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ else
++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++
++ # Both c and cxx compiler support -rpath directly
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ ;;
++
++ solaris*)
++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
++ if test "$GCC" = yes; then
++ wlarc='${wl}'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ else
++ case `$CC -V 2>&1` in
++ *"Compilers 5.0"*)
++ wlarc=''
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
++ ;;
++ *)
++ wlarc='${wl}'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++ ;;
++ esac
++ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'. GCC discards it without `$wl',
++ # but is careful enough not to reorder.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ fi
++ ;;
++ esac
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
++ sunos4*)
++ if test "x$host_vendor" = xsequent; then
++ # Use $CC to link under sequent, because it throws in some extra .o
++ # files that make .init and .fini sections work.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++ fi
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ sysv4)
++ case $host_vendor in
++ sni)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
++ ;;
++ siemens)
++ ## LD is ld it makes a PLAMLIB
++ ## CC just makes a GrossModule.
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ ;;
++ motorola)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
++ ;;
++ esac
++ runpath_var='LD_RUN_PATH'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ sysv4.3*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
++ ;;
++
++ sysv4*MP*)
++ if test -d /usr/nec; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var=LD_RUN_PATH
++ hardcode_runpath_var=yes
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ fi
++ ;;
++
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
++
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
++
++ if test "$GCC" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ fi
++ ;;
++
++ uts4*)
++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++
++ *)
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++
++ if test x$host_vendor = xsni; then
++ case $host in
++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
++ ;;
++ esac
++ fi
++ fi
++])
++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
++
++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
++_LT_DECL([], [extract_expsyms_cmds], [2],
++ [The commands to extract the exported symbol list from a shared archive])
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
++x|xyes)
++ # Assume -lc should be added
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++
++ if test "$enable_shared" = yes && test "$GCC" = yes; then
++ case $_LT_TAGVAR(archive_cmds, $1) in
++ *'~'*)
++ # FIXME: we may have to deal with multi-command sequences.
++ ;;
++ '$CC '*)
++ # Test whether the compiler implicitly links with -lc since on some
++ # systems, -lgcc has to come before -lc. If gcc already passes -lc
++ # to ld, don't add -lc before -lgcc.
++ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
++ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
++ [$RM conftest*
++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++ soname=conftest
++ lib=conftest
++ libobjs=conftest.$ac_objext
++ deplibs=
++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++ compiler_flags=-v
++ linker_flags=-v
++ verstring=
++ output_objdir=.
++ libname=conftest
++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++ _LT_TAGVAR(allow_undefined_flag, $1)=
++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++ then
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ else
++ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ fi
++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++ else
++ cat conftest.err 1>&5
++ fi
++ $RM conftest*
++ ])
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
++ ;;
++ esac
++ fi
++ ;;
++esac
++
++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
++ [Whether or not to add -lc for building shared libraries])
++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
++ [enable_shared_with_static_runtimes], [0],
++ [Whether or not to disallow shared libs when runtime libs are static])
++_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
++ [Compiler flag to allow reflexive dlopens])
++_LT_TAGDECL([], [whole_archive_flag_spec], [1],
++ [Compiler flag to generate shared objects directly from archives])
++_LT_TAGDECL([], [compiler_needs_object], [1],
++ [Whether the compiler copes with passing no objects directly])
++_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
++ [Create an old-style archive from a shared archive])
++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
++ [Create a temporary old-style archive to link instead of a shared archive])
++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
++_LT_TAGDECL([], [archive_expsym_cmds], [2])
++_LT_TAGDECL([], [module_cmds], [2],
++ [Commands used to build a loadable module if different from building
++ a shared archive.])
++_LT_TAGDECL([], [module_expsym_cmds], [2])
++_LT_TAGDECL([], [with_gnu_ld], [1],
++ [Whether we are building with GNU ld or not])
++_LT_TAGDECL([], [allow_undefined_flag], [1],
++ [Flag that allows shared libraries with undefined symbols to be built])
++_LT_TAGDECL([], [no_undefined_flag], [1],
++ [Flag that enforces no undefined symbols])
++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
++ [Flag to hardcode $libdir into a binary during linking.
++ This must work even if $libdir does not exist])
++_LT_TAGDECL([], [hardcode_libdir_separator], [1],
++ [Whether we need a single "-rpath" flag with a separated argument])
++_LT_TAGDECL([], [hardcode_direct], [0],
++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++ DIR into the resulting binary])
++_LT_TAGDECL([], [hardcode_direct_absolute], [0],
++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++ DIR into the resulting binary and the resulting library dependency is
++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
++ library is relocated])
++_LT_TAGDECL([], [hardcode_minus_L], [0],
++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
++ into the resulting binary])
++_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
++ into the resulting binary])
++_LT_TAGDECL([], [hardcode_automatic], [0],
++ [Set to "yes" if building a shared library automatically hardcodes DIR
++ into the library and all subsequent libraries and executables linked
++ against it])
++_LT_TAGDECL([], [inherit_rpath], [0],
++ [Set to yes if linker adds runtime paths of dependent libraries
++ to runtime path list])
++_LT_TAGDECL([], [link_all_deplibs], [0],
++ [Whether libtool must link a program against all its dependency libraries])
++_LT_TAGDECL([], [always_export_symbols], [0],
++ [Set to "yes" if exported symbols are required])
++_LT_TAGDECL([], [export_symbols_cmds], [2],
++ [The commands to list exported symbols])
++_LT_TAGDECL([], [exclude_expsyms], [1],
++ [Symbols that should not be listed in the preloaded symbols])
++_LT_TAGDECL([], [include_expsyms], [1],
++ [Symbols that must always be exported])
++_LT_TAGDECL([], [prelink_cmds], [2],
++ [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [postlink_cmds], [2],
++ [Commands necessary for finishing linking programs])
++_LT_TAGDECL([], [file_list_spec], [1],
++ [Specify filename containing input files])
++dnl FIXME: Not yet implemented
++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
++dnl [Compiler flag to generate thread safe objects])
++])# _LT_LINKER_SHLIBS
++
++
++# _LT_LANG_C_CONFIG([TAG])
++# ------------------------
++# Ensure that the configuration variables for a C compiler are suitably
++# defined. These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_C_CONFIG],
++[m4_require([_LT_DECL_EGREP])dnl
++lt_save_CC="$CC"
++AC_LANG_PUSH(C)
++
++# Source file extension for C test sources.
++ac_ext=c
++
++# Object file extension for compiled C test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
++
++_LT_TAG_COMPILER
++# Save the default compiler, since it gets overwritten when the other
++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
++compiler_DEFAULT=$CC
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++ _LT_COMPILER_NO_RTTI($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++ LT_SYS_DLOPEN_SELF
++ _LT_CMD_STRIPLIB
++
++ # Report which library types will actually be built
++ AC_MSG_CHECKING([if libtool supports shared libraries])
++ AC_MSG_RESULT([$can_build_shared])
++
++ AC_MSG_CHECKING([whether to build shared libraries])
++ test "$can_build_shared" = "no" && enable_shared=no
++
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++
++ aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ AC_MSG_RESULT([$enable_shared])
++
++ AC_MSG_CHECKING([whether to build static libraries])
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ AC_MSG_RESULT([$enable_static])
++
++ _LT_CONFIG($1)
++fi
++AC_LANG_POP
++CC="$lt_save_CC"
++])# _LT_LANG_C_CONFIG
++
++
++# _LT_LANG_CXX_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a C++ compiler are suitably
++# defined. These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_CXX_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_PATH_MANIFEST_TOOL])dnl
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++ (test "X$CXX" != "Xg++"))) ; then
++ AC_PROG_CXXCPP
++else
++ _lt_caught_CXX_error=yes
++fi
++
++AC_LANG_PUSH(C++)
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(compiler_needs_object, $1)=no
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for C++ test sources.
++ac_ext=cpp
++
++# Object file extension for compiled C++ test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the CXX compiler isn't working. Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_caught_CXX_error" != yes; then
++ # Code to be used in simple compile tests
++ lt_simple_compile_test_code="int some_variable = 0;"
++
++ # Code to be used in simple link tests
++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
++
++ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++ _LT_TAG_COMPILER
++
++ # save warnings/boilerplate of simple test code
++ _LT_COMPILER_BOILERPLATE
++ _LT_LINKER_BOILERPLATE
++
++ # Allow CC to be a program name with arguments.
++ lt_save_CC=$CC
++ lt_save_CFLAGS=$CFLAGS
++ lt_save_LD=$LD
++ lt_save_GCC=$GCC
++ GCC=$GXX
++ lt_save_with_gnu_ld=$with_gnu_ld
++ lt_save_path_LD=$lt_cv_path_LD
++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
++ else
++ $as_unset lt_cv_prog_gnu_ld
++ fi
++ if test -n "${lt_cv_path_LDCXX+set}"; then
++ lt_cv_path_LD=$lt_cv_path_LDCXX
++ else
++ $as_unset lt_cv_path_LD
++ fi
++ test -z "${LDCXX+set}" || LD=$LDCXX
++ CC=${CXX-"c++"}
++ CFLAGS=$CXXFLAGS
++ compiler=$CC
++ _LT_TAGVAR(compiler, $1)=$CC
++ _LT_CC_BASENAME([$compiler])
++
++ if test -n "$compiler"; then
++ # We don't want -fno-exception when compiling C++ code, so set the
++ # no_builtin_flag separately
++ if test "$GXX" = yes; then
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++ else
++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++ fi
++
++ if test "$GXX" = yes; then
++ # Set up default GNU C++ configuration
++
++ LT_PATH_LD
++
++ # Check if GNU C++ uses GNU ld as the underlying linker, since the
++ # archiving commands below assume that GNU ld is being used.
++ if test "$with_gnu_ld" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++ # If archive_cmds runs LD, not CC, wlarc should be empty
++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++ # investigate it a little bit more. (MM)
++ wlarc='${wl}'
++
++ # ancient GNU ld didn't support --whole-archive et. al.
++ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
++ $GREP 'no-whole-archive' > /dev/null; then
++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ else
++ _LT_TAGVAR(whole_archive_flag_spec, $1)=
++ fi
++ else
++ with_gnu_ld=no
++ wlarc=
++
++ # A generic and very simple default shared library creation
++ # command for GNU C++ for the case where it uses the native
++ # linker, instead of GNU ld. If possible, this setting should
++ # overridden to take advantage of the native linker features on
++ # the platform it is being used on.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ fi
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++
++ else
++ GXX=no
++ with_gnu_ld=no
++ wlarc=
++ fi
++
++ # PORTME: fill in a description of your system's C++ link characteristics
++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ case $host_os in
++ aix3*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ ;;
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
++ # When large executables or shared objects are built, AIX ld can
++ # have problems creating the table of contents. If linking a library
++ # or program results in "error TOC overflow" add -mminimal-toc to
++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++ _LT_TAGVAR(archive_cmds, $1)=''
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++ if test "$GXX" = yes; then
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ # We only want to do this on AIX 4.2 and lower, the check
++ # below for broken collect2 doesn't work under 4.3+
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" &&
++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ :
++ else
++ # We have old collect2
++ _LT_TAGVAR(hardcode_direct, $1)=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=
++ fi
++ esac
++ shared_flag='-shared'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag="$shared_flag "'${wl}-G'
++ fi
++ else
++ # not using gcc
++ if test "$host_cpu" = ia64; then
++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++ # chokes on -Wl,-G. The following line is correct:
++ shared_flag='-G'
++ else
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
++ fi
++ fi
++
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++ # It seems that -bexpall does not export symbols beginning with
++ # underscore (_), so it is better to generate a list of symbols to
++ # export.
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++ # Determine the default libpath from the value encoded in an empty
++ # executable.
++ _LT_SYS_MODULE_PATH_AIX([$1])
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++ else
++ if test "$host_cpu" = ia64; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++ else
++ # Determine the default libpath from the value encoded in an
++ # empty executable.
++ _LT_SYS_MODULE_PATH_AIX([$1])
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++ if test "$with_gnu_ld" = yes; then
++ # We only use this code for GNU lds that support --whole-archive.
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ else
++ # Exported symbols can be pulled into shared objects from archives
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++ fi
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++ # This is similar to how AIX traditionally builds its shared
++ # libraries.
++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++ fi
++ fi
++ ;;
++
++ beos*)
++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ # Joseph Beckenbach <jrb3 at best.com> says some releases of gcc
++ # support --undefined. This deserves some investigation. FIXME
++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ chorus*)
++ case $cc_basename in
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++
++ cygwin* | mingw* | pw32* | cegcc*)
++ case $GXX,$cc_basename in
++ ,cl* | no,cl*)
++ # Native MSVC
++ # hardcode_libdir_flag_spec is actually meaningless, as there is
++ # no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=yes
++ _LT_TAGVAR(file_list_spec, $1)='@'
++ # Tell ltmain to make .lib files, not .a files.
++ libext=lib
++ # Tell ltmain to make .dll files, not .so files.
++ shrext_cmds=".dll"
++ # FIXME: Setting linknames here is a bad hack.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
++ else
++ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
++ fi~
++ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
++ linknames='
++ # The linker will not automatically build a static lib if we build a DLL.
++ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++ # Don't use ranlib
++ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
++ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
++ lt_tool_outputfile="@TOOL_OUTPUT@"~
++ case $lt_outputfile in
++ *.exe|*.EXE) ;;
++ *)
++ lt_outputfile="$lt_outputfile.exe"
++ lt_tool_outputfile="$lt_tool_outputfile.exe"
++ ;;
++ esac~
++ func_to_tool_file "$lt_outputfile"~
++ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
++ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
++ $RM "$lt_outputfile.manifest";
++ fi'
++ ;;
++ *)
++ # g++
++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++ # as there is no search path for DLLs.
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++ _LT_TAGVAR(always_export_symbols, $1)=no
++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ # If the export-symbols file already is a .def file (1st line
++ # is EXPORTS), use it as is; otherwise, prepend...
++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname.def;
++ else
++ echo EXPORTS > $output_objdir/$soname.def;
++ cat $export_symbols >> $output_objdir/$soname.def;
++ fi~
++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++ darwin* | rhapsody*)
++ _LT_DARWIN_LINKER_FEATURES($1)
++ ;;
++
++ dgux*)
++ case $cc_basename in
++ ec++*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ ghcx*)
++ # Green Hills C++ Compiler
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++
++ freebsd2.*)
++ # C++ shared libraries reported to be fairly broken before
++ # switch to ELF
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ freebsd-elf*)
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ ;;
++
++ freebsd* | dragonfly*)
++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++ # conventions
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ ;;
++
++ gnu*)
++ ;;
++
++ haiku*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++
++ hpux9*)
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++ # but as the default
++ # location of the library.
++
++ case $cc_basename in
++ CC*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aCC*)
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++ else
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ hpux10*|hpux11*)
++ if test $with_gnu_ld = no; then
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ case $host_cpu in
++ hppa*64*|ia64*)
++ ;;
++ *)
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ ;;
++ esac
++ fi
++ case $host_cpu in
++ hppa*64*|ia64*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ ;;
++ *)
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++ # but as the default
++ # location of the library.
++ ;;
++ esac
++
++ case $cc_basename in
++ CC*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ aCC*)
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ esac
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ if test $with_gnu_ld = no; then
++ case $host_cpu in
++ hppa*64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ ia64*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ ;;
++ esac
++ fi
++ else
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ interix[[3-9]]*)
++ _LT_TAGVAR(hardcode_direct, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++ # Instead, shared libraries are loaded at an image base (0x10000000 by
++ # default) and relocated if they conflict, which is a slow very memory
++ # consuming and fragmenting process. To avoid this, we pick a random,
++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++ ;;
++ irix5* | irix6*)
++ case $cc_basename in
++ CC*)
++ # SGI C++
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++
++ # Archives containing C++ object files must be created using
++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
++ ;;
++ *)
++ if test "$GXX" = yes; then
++ if test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ else
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
++ fi
++ fi
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ ;;
++ esac
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++ _LT_TAGVAR(inherit_rpath, $1)=yes
++ ;;
++
++ linux* | k*bsd*-gnu | kopensolaris*-gnu)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
++
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++ # Archives containing C++ object files must be created using
++ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++ ;;
++ icpc* | ecpc* )
++ # Intel C++
++ with_gnu_ld=yes
++ # version 8.0 and above of icpc choke on multiply defined symbols
++ # if we add $predep_objects and $postdep_objects, however 7.1 and
++ # earlier do not add the objects themselves.
++ case `$CC -V 2>&1` in
++ *"Version 7."*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ *) # Version 8.0 or newer
++ tmp_idyn=
++ case $host_cpu in
++ ia64*) tmp_idyn=' -i_dynamic';;
++ esac
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++ ;;
++ esac
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++ ;;
++ pgCC* | pgcpp*)
++ # Portland Group C++ compiler
++ case `$CC -V` in
++ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
++ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
++ $RANLIB $oldlib'
++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
++ rm -rf $tpldir~
++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ ;;
++ *) # Version 6 and above use weak symbols
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++ ;;
++ esac
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ ;;
++ cxx*)
++ # Compaq C++
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++
++ runpath_var=LD_RUN_PATH
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
++ ;;
++ xl* | mpixl* | bgxl*)
++ # IBM XL 8.0 on PPC, with GNU ld
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++ if test "x$supports_anon_versioning" = xyes; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++ echo "local: *; };" >> $output_objdir/$libname.ver~
++ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++ fi
++ ;;
++ *)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
++ _LT_TAGVAR(compiler_needs_object, $1)=yes
++
++ # Not sure whether something based on
++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
++ # would be better.
++ output_verbose_link_cmd='func_echo_all'
++
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ esac
++ ;;
++ esac
++ ;;
++
++ lynxos*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ m88k*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ mvs*)
++ case $cc_basename in
++ cxx*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++
++ netbsd*)
++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++ wlarc=
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ fi
++ # Workaround some broken pre-1.5 toolchains
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++ ;;
++
++ *nto* | *qnx*)
++ _LT_TAGVAR(ld_shlibs, $1)=yes
++ ;;
++
++ openbsd2*)
++ # C++ shared libraries are fairly broken
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ openbsd*)
++ if test -f /usr/libexec/ld.so; then
++ _LT_TAGVAR(hardcode_direct, $1)=yes
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++ fi
++ output_verbose_link_cmd=func_echo_all
++ else
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++
++ osf3* | osf4* | osf5*)
++ case $cc_basename in
++ KCC*)
++ # Kuck and Associates, Inc. (KAI) C++ Compiler
++
++ # KCC will only create a shared library if the output file
++ # ends with ".so" (or ".sl" for HP-UX), so rename the library
++ # to its proper name (with version) after linking.
++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ # Archives containing C++ object files must be created using
++ # the KAI C++ compiler.
++ case $host in
++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
++ esac
++ ;;
++ RCC*)
++ # Rational C++ 2.4.1
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ cxx*)
++ case $host in
++ osf3*)
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ ;;
++ *)
++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++ echo "-hidden">> $lib.exp~
++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
++ $RM $lib.exp'
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++ ;;
++ esac
++
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ #
++ # There doesn't appear to be a way to prevent this compiler from
++ # explicitly linking system object files so we need to strip them
++ # from the output so that they don't get included in the library
++ # dependencies.
++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
++ ;;
++ *)
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++ case $host in
++ osf3*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ ;;
++ esac
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++
++ else
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ fi
++ ;;
++ esac
++ ;;
++
++ psos*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ sunos4*)
++ case $cc_basename in
++ CC*)
++ # Sun C++ 4.x
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ lcc*)
++ # Lucid
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++
++ solaris*)
++ case $cc_basename in
++ CC* | sunCC*)
++ # Sun C++ 4.2, 5.x and Centerline C++
++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ # The compiler driver will combine and reorder linker options,
++ # but understands `-z linker_flag'.
++ # Supported since Solaris 2.6 (maybe 2.5.1?)
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++ ;;
++ esac
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++
++ output_verbose_link_cmd='func_echo_all'
++
++ # Archives containing C++ object files must be created using
++ # "CC -xar", where "CC" is the Sun C++ compiler. This is
++ # necessary to make sure instantiated templates are included
++ # in the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++ ;;
++ gcx*)
++ # Green Hills C++ Compiler
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++
++ # The C++ compiler must be used to create the archive.
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++ ;;
++ *)
++ # GNU C++ compiler with Solaris linker
++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++ else
++ # g++ 2.7 appears to require `-G' NOT `-shared' on this
++ # platform.
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++ # Commands to make compiler produce verbose output that lists
++ # what "hidden" libraries, object files and flags are used when
++ # linking a shared library.
++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
++ fi
++
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++ case $host_os in
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++ *)
++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++ ;;
++ esac
++ fi
++ ;;
++ esac
++ ;;
++
++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ runpath_var='LD_RUN_PATH'
++
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
++
++ sysv5* | sco3.2v5* | sco5v6*)
++ # Note: We can NOT use -z defs as we might desire, because we do not
++ # link with -lc, and that would cause any symbols used from libc to
++ # always be unresolved, which means just about no library would
++ # ever link correctly. If we're not using GNU ld we use -z text
++ # though, which does catch some bad symbols but isn't as heavy-handed
++ # as -z defs.
++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++ _LT_TAGVAR(link_all_deplibs, $1)=yes
++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++ runpath_var='LD_RUN_PATH'
++
++ case $cc_basename in
++ CC*)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
++ '"$_LT_TAGVAR(old_archive_cmds, $1)"
++ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
++ '"$_LT_TAGVAR(reload_cmds, $1)"
++ ;;
++ *)
++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++ ;;
++ esac
++ ;;
++
++ tandem*)
++ case $cc_basename in
++ NCC*)
++ # NonStop-UX NCC 3.20
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++ ;;
++
++ vxworks*)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++
++ *)
++ # FIXME: insert proper C++ library support
++ _LT_TAGVAR(ld_shlibs, $1)=no
++ ;;
++ esac
++
++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++ _LT_TAGVAR(GCC, $1)="$GXX"
++ _LT_TAGVAR(LD, $1)="$LD"
++
++ ## CAVEAT EMPTOR:
++ ## There is no encapsulation within the following macros, do not change
++ ## the running order or otherwise move them around unless you know exactly
++ ## what you are doing...
++ _LT_SYS_HIDDEN_LIBDEPS($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++
++ _LT_CONFIG($1)
++ fi # test -n "$compiler"
++
++ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
++ LDCXX=$LD
++ LD=$lt_save_LD
++ GCC=$lt_save_GCC
++ with_gnu_ld=$lt_save_with_gnu_ld
++ lt_cv_path_LDCXX=$lt_cv_path_LD
++ lt_cv_path_LD=$lt_save_path_LD
++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++fi # test "$_lt_caught_CXX_error" != yes
++
++AC_LANG_POP
++])# _LT_LANG_CXX_CONFIG
++
++
++# _LT_FUNC_STRIPNAME_CNF
++# ----------------------
++# func_stripname_cnf prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++#
++# This function is identical to the (non-XSI) version of func_stripname,
++# except this one can be used by m4 code that may be executed by configure,
++# rather than the libtool script.
++m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
++AC_REQUIRE([_LT_DECL_SED])
++AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
++func_stripname_cnf ()
++{
++ case ${2} in
++ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
++ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
++ esac
++} # func_stripname_cnf
++])# _LT_FUNC_STRIPNAME_CNF
++
++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
++# ---------------------------------
++# Figure out "hidden" library dependencies from verbose
++# compiler output when linking a shared library.
++# Parse the compiler output and extract the necessary
++# objects, libraries and library flags.
++m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
++# Dependencies to place before and after the object being linked:
++_LT_TAGVAR(predep_objects, $1)=
++_LT_TAGVAR(postdep_objects, $1)=
++_LT_TAGVAR(predeps, $1)=
++_LT_TAGVAR(postdeps, $1)=
++_LT_TAGVAR(compiler_lib_search_path, $1)=
++
++dnl we can't use the lt_simple_compile_test_code here,
++dnl because it contains code intended for an executable,
++dnl not a library. It's possible we should let each
++dnl tag define a new lt_????_link_test_code variable,
++dnl but it's only used here...
++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
++int a;
++void foo (void) { a = 0; }
++_LT_EOF
++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
++class Foo
++{
++public:
++ Foo (void) { a = 0; }
++private:
++ int a;
++};
++_LT_EOF
++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
++ subroutine foo
++ implicit none
++ integer*4 a
++ a=0
++ return
++ end
++_LT_EOF
++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
++ subroutine foo
++ implicit none
++ integer a
++ a=0
++ return
++ end
++_LT_EOF
++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
++public class foo {
++ private int a;
++ public void bar (void) {
++ a = 0;
++ }
++};
++_LT_EOF
++], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
++package foo
++func foo() {
++}
++_LT_EOF
++])
++
++_lt_libdeps_save_CFLAGS=$CFLAGS
++case "$CC $CFLAGS " in #(
++*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
++*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
++*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
++esac
++
++dnl Parse the compiler output and extract the necessary
++dnl objects, libraries and library flags.
++if AC_TRY_EVAL(ac_compile); then
++ # Parse the compiler output and extract the necessary
++ # objects, libraries and library flags.
++
++ # Sentinel used to keep track of whether or not we are before
++ # the conftest object file.
++ pre_test_object_deps_done=no
++
++ for p in `eval "$output_verbose_link_cmd"`; do
++ case ${prev}${p} in
++
++ -L* | -R* | -l*)
++ # Some compilers place space between "-{L,R}" and the path.
++ # Remove the space.
++ if test $p = "-L" ||
++ test $p = "-R"; then
++ prev=$p
++ continue
++ fi
++
++ # Expand the sysroot to ease extracting the directories later.
++ if test -z "$prev"; then
++ case $p in
++ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
++ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
++ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
++ esac
++ fi
++ case $p in
++ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
++ esac
++ if test "$pre_test_object_deps_done" = no; then
++ case ${prev} in
++ -L | -R)
++ # Internal compiler library paths should come after those
++ # provided the user. The postdeps already come after the
++ # user supplied libs so there is no need to process them.
++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
++ else
++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
++ fi
++ ;;
++ # The "-l" case would never come before the object being
++ # linked, so don't bother handling this case.
++ esac
++ else
++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
++ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
++ else
++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
++ fi
++ fi
++ prev=
++ ;;
++
++ *.lto.$objext) ;; # Ignore GCC LTO objects
++ *.$objext)
++ # This assumes that the test object file only shows up
++ # once in the compiler output.
++ if test "$p" = "conftest.$objext"; then
++ pre_test_object_deps_done=yes
++ continue
++ fi
++
++ if test "$pre_test_object_deps_done" = no; then
++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
++ _LT_TAGVAR(predep_objects, $1)="$p"
++ else
++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
++ fi
++ else
++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
++ _LT_TAGVAR(postdep_objects, $1)="$p"
++ else
++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
++ fi
++ fi
++ ;;
++
++ *) ;; # Ignore the rest.
++
++ esac
++ done
++
++ # Clean up.
++ rm -f a.out a.exe
++else
++ echo "libtool.m4: error: problem compiling $1 test program"
++fi
++
++$RM -f confest.$objext
++CFLAGS=$_lt_libdeps_save_CFLAGS
++
++# PORTME: override above test on systems where it is broken
++m4_if([$1], [CXX],
++[case $host_os in
++interix[[3-9]]*)
++ # Interix 3.5 installs completely hosed .la files for C++, so rather than
++ # hack all around it, let's just trust "g++" to DTRT.
++ _LT_TAGVAR(predep_objects,$1)=
++ _LT_TAGVAR(postdep_objects,$1)=
++ _LT_TAGVAR(postdeps,$1)=
++ ;;
++
++linux*)
++ case `$CC -V 2>&1 | sed 5q` in
++ *Sun\ C*)
++ # Sun C++ 5.9
++
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
++
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
++
++solaris*)
++ case $cc_basename in
++ CC* | sunCC*)
++ # The more standards-conforming stlport4 library is
++ # incompatible with the Cstd library. Avoid specifying
++ # it if it's in CXXFLAGS. Ignore libCrun as
++ # -library=stlport4 depends on it.
++ case " $CXX $CXXFLAGS " in
++ *" -library=stlport4 "*)
++ solaris_use_stlport4=yes
++ ;;
++ esac
++
++ # Adding this requires a known-good setup of shared libraries for
++ # Sun compiler versions before 5.6, else PIC objects from an old
++ # archive will be linked into the output, leading to subtle bugs.
++ if test "$solaris_use_stlport4" != yes; then
++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++ fi
++ ;;
++ esac
++ ;;
++esac
++])
++
++case " $_LT_TAGVAR(postdeps, $1) " in
++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
++esac
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
++fi
++_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
++ [The directories searched by this compiler when creating a shared library])
++_LT_TAGDECL([], [predep_objects], [1],
++ [Dependencies to place before and after the objects being linked to
++ create a shared library])
++_LT_TAGDECL([], [postdep_objects], [1])
++_LT_TAGDECL([], [predeps], [1])
++_LT_TAGDECL([], [postdeps], [1])
++_LT_TAGDECL([], [compiler_lib_search_path], [1],
++ [The library search path used internally by the compiler when linking
++ a shared library])
++])# _LT_SYS_HIDDEN_LIBDEPS
++
++
++# _LT_LANG_F77_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a Fortran 77 compiler are
++# suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_F77_CONFIG],
++[AC_LANG_PUSH(Fortran 77)
++if test -z "$F77" || test "X$F77" = "Xno"; then
++ _lt_disable_F77=yes
++fi
++
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for f77 test sources.
++ac_ext=f
++
++# Object file extension for compiled f77 test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the F77 compiler isn't working. Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_F77" != yes; then
++ # Code to be used in simple compile tests
++ lt_simple_compile_test_code="\
++ subroutine t
++ return
++ end
++"
++
++ # Code to be used in simple link tests
++ lt_simple_link_test_code="\
++ program t
++ end
++"
++
++ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++ _LT_TAG_COMPILER
++
++ # save warnings/boilerplate of simple test code
++ _LT_COMPILER_BOILERPLATE
++ _LT_LINKER_BOILERPLATE
++
++ # Allow CC to be a program name with arguments.
++ lt_save_CC="$CC"
++ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
++ CC=${F77-"f77"}
++ CFLAGS=$FFLAGS
++ compiler=$CC
++ _LT_TAGVAR(compiler, $1)=$CC
++ _LT_CC_BASENAME([$compiler])
++ GCC=$G77
++ if test -n "$compiler"; then
++ AC_MSG_CHECKING([if libtool supports shared libraries])
++ AC_MSG_RESULT([$can_build_shared])
++
++ AC_MSG_CHECKING([whether to build shared libraries])
++ test "$can_build_shared" = "no" && enable_shared=no
++
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ AC_MSG_RESULT([$enable_shared])
++
++ AC_MSG_CHECKING([whether to build static libraries])
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ AC_MSG_RESULT([$enable_static])
++
++ _LT_TAGVAR(GCC, $1)="$G77"
++ _LT_TAGVAR(LD, $1)="$LD"
++
++ ## CAVEAT EMPTOR:
++ ## There is no encapsulation within the following macros, do not change
++ ## the running order or otherwise move them around unless you know exactly
++ ## what you are doing...
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++
++ _LT_CONFIG($1)
++ fi # test -n "$compiler"
++
++ GCC=$lt_save_GCC
++ CC="$lt_save_CC"
++ CFLAGS="$lt_save_CFLAGS"
++fi # test "$_lt_disable_F77" != yes
++
++AC_LANG_POP
++])# _LT_LANG_F77_CONFIG
++
++
++# _LT_LANG_FC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for a Fortran compiler are
++# suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_FC_CONFIG],
++[AC_LANG_PUSH(Fortran)
++
++if test -z "$FC" || test "X$FC" = "Xno"; then
++ _lt_disable_FC=yes
++fi
++
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for fc test sources.
++ac_ext=${ac_fc_srcext-f}
++
++# Object file extension for compiled fc test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the FC compiler isn't working. Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_FC" != yes; then
++ # Code to be used in simple compile tests
++ lt_simple_compile_test_code="\
++ subroutine t
++ return
++ end
++"
++
++ # Code to be used in simple link tests
++ lt_simple_link_test_code="\
++ program t
++ end
++"
++
++ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++ _LT_TAG_COMPILER
++
++ # save warnings/boilerplate of simple test code
++ _LT_COMPILER_BOILERPLATE
++ _LT_LINKER_BOILERPLATE
++
++ # Allow CC to be a program name with arguments.
++ lt_save_CC="$CC"
++ lt_save_GCC=$GCC
++ lt_save_CFLAGS=$CFLAGS
++ CC=${FC-"f95"}
++ CFLAGS=$FCFLAGS
++ compiler=$CC
++ GCC=$ac_cv_fc_compiler_gnu
++
++ _LT_TAGVAR(compiler, $1)=$CC
++ _LT_CC_BASENAME([$compiler])
++
++ if test -n "$compiler"; then
++ AC_MSG_CHECKING([if libtool supports shared libraries])
++ AC_MSG_RESULT([$can_build_shared])
++
++ AC_MSG_CHECKING([whether to build shared libraries])
++ test "$can_build_shared" = "no" && enable_shared=no
++
++ # On AIX, shared libraries and static libraries use the same namespace, and
++ # are all built from PIC.
++ case $host_os in
++ aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++ aix[[4-9]]*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++ esac
++ AC_MSG_RESULT([$enable_shared])
++
++ AC_MSG_CHECKING([whether to build static libraries])
++ # Make sure either enable_shared or enable_static is yes.
++ test "$enable_shared" = yes || enable_static=yes
++ AC_MSG_RESULT([$enable_static])
++
++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
++ _LT_TAGVAR(LD, $1)="$LD"
++
++ ## CAVEAT EMPTOR:
++ ## There is no encapsulation within the following macros, do not change
++ ## the running order or otherwise move them around unless you know exactly
++ ## what you are doing...
++ _LT_SYS_HIDDEN_LIBDEPS($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_SYS_DYNAMIC_LINKER($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++
++ _LT_CONFIG($1)
++ fi # test -n "$compiler"
++
++ GCC=$lt_save_GCC
++ CC=$lt_save_CC
++ CFLAGS=$lt_save_CFLAGS
++fi # test "$_lt_disable_FC" != yes
++
++AC_LANG_POP
++])# _LT_LANG_FC_CONFIG
++
++
++# _LT_LANG_GCJ_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for the GNU Java Compiler compiler
++# are suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_GCJ_CONFIG],
++[AC_REQUIRE([LT_PROG_GCJ])dnl
++AC_LANG_SAVE
++
++# Source file extension for Java test sources.
++ac_ext=java
++
++# Object file extension for compiled Java test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
++lt_save_GCC=$GCC
++GCC=yes
++CC=${GCJ-"gcj"}
++CFLAGS=$GCJFLAGS
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_TAGVAR(LD, $1)="$LD"
++_LT_CC_BASENAME([$compiler])
++
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++ _LT_COMPILER_NO_RTTI($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++
++ _LT_CONFIG($1)
++fi
++
++AC_LANG_RESTORE
++
++GCC=$lt_save_GCC
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
++])# _LT_LANG_GCJ_CONFIG
++
++
++# _LT_LANG_GO_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for the GNU Go compiler
++# are suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_GO_CONFIG],
++[AC_REQUIRE([LT_PROG_GO])dnl
++AC_LANG_SAVE
++
++# Source file extension for Go test sources.
++ac_ext=go
++
++# Object file extension for compiled Go test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="package main; func main() { }"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='package main; func main() { }'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_CFLAGS=$CFLAGS
++lt_save_GCC=$GCC
++GCC=yes
++CC=${GOC-"gccgo"}
++CFLAGS=$GOFLAGS
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_TAGVAR(LD, $1)="$LD"
++_LT_CC_BASENAME([$compiler])
++
++# Go did not exist at the time GCC didn't implicitly link libc in.
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(reload_flag, $1)=$reload_flag
++_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++ _LT_COMPILER_NO_RTTI($1)
++ _LT_COMPILER_PIC($1)
++ _LT_COMPILER_C_O($1)
++ _LT_COMPILER_FILE_LOCKS($1)
++ _LT_LINKER_SHLIBS($1)
++ _LT_LINKER_HARDCODE_LIBPATH($1)
++
++ _LT_CONFIG($1)
++fi
++
++AC_LANG_RESTORE
++
++GCC=$lt_save_GCC
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
++])# _LT_LANG_GO_CONFIG
++
++
++# _LT_LANG_RC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for the Windows resource compiler
++# are suitably defined. These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_RC_CONFIG],
++[AC_REQUIRE([LT_PROG_RC])dnl
++AC_LANG_SAVE
++
++# Source file extension for RC test sources.
++ac_ext=rc
++
++# Object file extension for compiled RC test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++lt_save_CFLAGS=$CFLAGS
++lt_save_GCC=$GCC
++GCC=
++CC=${RC-"windres"}
++CFLAGS=
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++
++if test -n "$compiler"; then
++ :
++ _LT_CONFIG($1)
++fi
++
++GCC=$lt_save_GCC
++AC_LANG_RESTORE
++CC=$lt_save_CC
++CFLAGS=$lt_save_CFLAGS
++])# _LT_LANG_RC_CONFIG
++
++
++# LT_PROG_GCJ
++# -----------
++AC_DEFUN([LT_PROG_GCJ],
++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
++ [AC_CHECK_TOOL(GCJ, gcj,)
++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
++ AC_SUBST(GCJFLAGS)])])[]dnl
++])
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
++
++
++# LT_PROG_GO
++# ----------
++AC_DEFUN([LT_PROG_GO],
++[AC_CHECK_TOOL(GOC, gccgo,)
++])
++
++
++# LT_PROG_RC
++# ----------
++AC_DEFUN([LT_PROG_RC],
++[AC_CHECK_TOOL(RC, windres,)
++])
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_RC], [])
++
++
++# _LT_DECL_EGREP
++# --------------
++# If we don't have a new enough Autoconf to choose the best grep
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_EGREP],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_REQUIRE([AC_PROG_FGREP])dnl
++test -z "$GREP" && GREP=grep
++_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
++_LT_DECL([], [EGREP], [1], [An ERE matcher])
++_LT_DECL([], [FGREP], [1], [A literal string matcher])
++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
++AC_SUBST([GREP])
++])
++
++
++# _LT_DECL_OBJDUMP
++# --------------
++# If we don't have a new enough Autoconf to choose the best objdump
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_OBJDUMP],
++[AC_CHECK_TOOL(OBJDUMP, objdump, false)
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
++AC_SUBST([OBJDUMP])
++])
++
++# _LT_DECL_DLLTOOL
++# ----------------
++# Ensure DLLTOOL variable is set.
++m4_defun([_LT_DECL_DLLTOOL],
++[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
++AC_SUBST([DLLTOOL])
++])
++
++# _LT_DECL_SED
++# ------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible. Prefer GNU sed if found.
++m4_defun([_LT_DECL_SED],
++[AC_PROG_SED
++test -z "$SED" && SED=sed
++Xsed="$SED -e 1s/^X//"
++_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
++ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
++])# _LT_DECL_SED
++
++m4_ifndef([AC_PROG_SED], [
++############################################################
++# NOTE: This macro has been submitted for inclusion into #
++# GNU Autoconf as AC_PROG_SED. When it is available in #
++# a released version of Autoconf we should remove this #
++# macro and use it instead. #
++############################################################
++
++m4_defun([AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for lt_ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
++ fi
++ done
++ done
++done
++IFS=$as_save_IFS
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++ test ! -f $lt_ac_sed && continue
++ cat /dev/null > conftest.in
++ lt_ac_count=0
++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++ # Check for GNU sed and select it if it is found.
++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++ lt_cv_path_SED=$lt_ac_sed
++ break
++ fi
++ while true; do
++ cat conftest.in conftest.in >conftest.tmp
++ mv conftest.tmp conftest.in
++ cp conftest.in conftest.nl
++ echo >>conftest.nl
++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++ cmp -s conftest.out conftest.nl || break
++ # 10000 chars as input seems more than enough
++ test $lt_ac_count -gt 10 && break
++ lt_ac_count=`expr $lt_ac_count + 1`
++ if test $lt_ac_count -gt $lt_ac_max; then
++ lt_ac_max=$lt_ac_count
++ lt_cv_path_SED=$lt_ac_sed
++ fi
++ done
++done
++])
++SED=$lt_cv_path_SED
++AC_SUBST([SED])
++AC_MSG_RESULT([$SED])
++])#AC_PROG_SED
++])#m4_ifndef
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_SED], [])
++
++
++# _LT_CHECK_SHELL_FEATURES
++# ------------------------
++# Find out whether the shell is Bourne or XSI compatible,
++# or has some other useful features.
++m4_defun([_LT_CHECK_SHELL_FEATURES],
++[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
++# Try some XSI features
++xsi_shell=no
++( _lt_dummy="a/b/c"
++ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
++ = c,a/b,b/c, \
++ && eval 'test $(( 1 + 1 )) -eq 2 \
++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
++ && xsi_shell=yes
++AC_MSG_RESULT([$xsi_shell])
++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
++
++AC_MSG_CHECKING([whether the shell understands "+="])
++lt_shell_append=no
++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
++ >/dev/null 2>&1 \
++ && lt_shell_append=yes
++AC_MSG_RESULT([$lt_shell_append])
++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
++
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ lt_unset=unset
++else
++ lt_unset=false
++fi
++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
++
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++ lt_SP2NL='tr \040 \012'
++ lt_NL2SP='tr \015\012 \040\040'
++ ;;
++ *) # EBCDIC based system
++ lt_SP2NL='tr \100 \n'
++ lt_NL2SP='tr \r\n \100\100'
++ ;;
++esac
++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
++])# _LT_CHECK_SHELL_FEATURES
++
++
++# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
++# ------------------------------------------------------
++# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
++# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
++m4_defun([_LT_PROG_FUNCTION_REPLACE],
++[dnl {
++sed -e '/^$1 ()$/,/^} # $1 /c\
++$1 ()\
++{\
++m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
++} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++test 0 -eq $? || _lt_function_replace_fail=:
++])
++
++
++# _LT_PROG_REPLACE_SHELLFNS
++# -------------------------
++# Replace existing portable implementations of several shell functions with
++# equivalent extended shell implementations where those features are available..
++m4_defun([_LT_PROG_REPLACE_SHELLFNS],
++[if test x"$xsi_shell" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac])
++
++ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
++ func_basename_result="${1##*/}"])
++
++ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
++ case ${1} in
++ */*) func_dirname_result="${1%/*}${2}" ;;
++ * ) func_dirname_result="${3}" ;;
++ esac
++ func_basename_result="${1##*/}"])
++
++ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++ # positional parameters, so assign one to ordinary parameter first.
++ func_stripname_result=${3}
++ func_stripname_result=${func_stripname_result#"${1}"}
++ func_stripname_result=${func_stripname_result%"${2}"}])
++
++ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
++ func_split_long_opt_name=${1%%=*}
++ func_split_long_opt_arg=${1#*=}])
++
++ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
++ func_split_short_opt_arg=${1#??}
++ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
++
++ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
++ case ${1} in
++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++ *) func_lo2o_result=${1} ;;
++ esac])
++
++ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
++
++ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
++
++ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
++fi
++
++if test x"$lt_shell_append" = xyes; then
++ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
++
++ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
++ func_quote_for_eval "${2}"
++dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
++ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
++
++ # Save a `func_append' function call where possible by direct use of '+='
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++else
++ # Save a `func_append' function call even when '+=' is not available
++ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
++ && mv -f "$cfgfile.tmp" "$cfgfile" \
++ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
++ test 0 -eq $? || _lt_function_replace_fail=:
++fi
++
++if test x"$_lt_function_replace_fail" = x":"; then
++ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
++fi
++])
++
++# _LT_PATH_CONVERSION_FUNCTIONS
++# -----------------------------
++# Determine which file name conversion functions should be used by
++# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
++# for certain cross-compile configurations and native mingw.
++m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_MSG_CHECKING([how to convert $build file names to $host format])
++AC_CACHE_VAL(lt_cv_to_host_file_cmd,
++[case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
++ ;;
++ esac
++ ;;
++ *-*-cygwin* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
++ ;;
++ *-*-cygwin* )
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++ * ) # otherwise, assume *nix
++ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
++ ;;
++ esac
++ ;;
++ * ) # unhandled hosts (and "normal" native builds)
++ lt_cv_to_host_file_cmd=func_convert_file_noop
++ ;;
++esac
++])
++to_host_file_cmd=$lt_cv_to_host_file_cmd
++AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
++_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
++ [0], [convert $build file names to $host format])dnl
++
++AC_MSG_CHECKING([how to convert $build file names to toolchain format])
++AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
++[#assume ordinary cross tools, or native build.
++lt_cv_to_tool_file_cmd=func_convert_file_noop
++case $host in
++ *-*-mingw* )
++ case $build in
++ *-*-mingw* ) # actually msys
++ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
++ ;;
++ esac
++ ;;
++esac
++])
++to_tool_file_cmd=$lt_cv_to_tool_file_cmd
++AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
++_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
++ [0], [convert $build files to toolchain format])dnl
++])# _LT_PATH_CONVERSION_FUNCTIONS
+diff --git a/libclamav/libmspack-0.4alpha/m4/ltoptions.m4 b/libclamav/libmspack-0.4alpha/m4/ltoptions.m4
+new file mode 100644
+index 000000000000..5d9acd8e23bc
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/m4/ltoptions.m4
+@@ -0,0 +1,384 @@
++# Helper functions for option handling. -*- Autoconf -*-
++#
++# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
++# Inc.
++# Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 7 ltoptions.m4
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
++
++
++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
++# ------------------------------------------
++m4_define([_LT_MANGLE_OPTION],
++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
++
++
++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
++# ---------------------------------------
++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
++# matching handler defined, dispatch to it. Other OPTION-NAMEs are
++# saved as a flag.
++m4_define([_LT_SET_OPTION],
++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
++ _LT_MANGLE_DEFUN([$1], [$2]),
++ [m4_warning([Unknown $1 option `$2'])])[]dnl
++])
++
++
++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
++# ------------------------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++m4_define([_LT_IF_OPTION],
++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
++
++
++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
++# -------------------------------------------------------
++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
++# are set.
++m4_define([_LT_UNLESS_OPTIONS],
++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
++ [m4_define([$0_found])])])[]dnl
++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
++])[]dnl
++])
++
++
++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
++# ----------------------------------------
++# OPTION-LIST is a space-separated list of Libtool options associated
++# with MACRO-NAME. If any OPTION has a matching handler declared with
++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
++# the unknown option and exit.
++m4_defun([_LT_SET_OPTIONS],
++[# Set options
++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++ [_LT_SET_OPTION([$1], _LT_Option)])
++
++m4_if([$1],[LT_INIT],[
++ dnl
++ dnl Simply set some default values (i.e off) if boolean options were not
++ dnl specified:
++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
++ ])
++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
++ ])
++ dnl
++ dnl If no reference was made to various pairs of opposing options, then
++ dnl we run the default mode handler for the pair. For example, if neither
++ dnl `shared' nor `disable-shared' was passed, we enable building of shared
++ dnl archives by default:
++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
++ [_LT_ENABLE_FAST_INSTALL])
++ ])
++])# _LT_SET_OPTIONS
++
++
++## --------------------------------- ##
++## Macros to handle LT_INIT options. ##
++## --------------------------------- ##
++
++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
++# -----------------------------------------
++m4_define([_LT_MANGLE_DEFUN],
++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
++
++
++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
++# -----------------------------------------------
++m4_define([LT_OPTION_DEFINE],
++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
++])# LT_OPTION_DEFINE
++
++
++# dlopen
++# ------
++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
++])
++
++AU_DEFUN([AC_LIBTOOL_DLOPEN],
++[_LT_SET_OPTION([LT_INIT], [dlopen])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `dlopen' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
++
++
++# win32-dll
++# ---------
++# Declare package support for building win32 dll's.
++LT_OPTION_DEFINE([LT_INIT], [win32-dll],
++[enable_win32_dll=yes
++
++case $host in
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
++ AC_CHECK_TOOL(AS, as, false)
++ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++ AC_CHECK_TOOL(OBJDUMP, objdump, false)
++ ;;
++esac
++
++test -z "$AS" && AS=as
++_LT_DECL([], [AS], [1], [Assembler program])dnl
++
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
++
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
++])# win32-dll
++
++AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++_LT_SET_OPTION([LT_INIT], [win32-dll])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `win32-dll' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
++
++
++# _LT_ENABLE_SHARED([DEFAULT])
++# ----------------------------
++# implement the --enable-shared flag, and supports the `shared' and
++# `disable-shared' LT_INIT options.
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_SHARED],
++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([shared],
++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_shared=yes ;;
++ no) enable_shared=no ;;
++ *)
++ enable_shared=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_shared=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
++
++ _LT_DECL([build_libtool_libs], [enable_shared], [0],
++ [Whether or not to build shared libraries])
++])# _LT_ENABLE_SHARED
++
++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
++
++# Old names:
++AC_DEFUN([AC_ENABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
++])
++
++AC_DEFUN([AC_DISABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], [disable-shared])
++])
++
++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_SHARED], [])
++dnl AC_DEFUN([AM_DISABLE_SHARED], [])
++
++
++
++# _LT_ENABLE_STATIC([DEFAULT])
++# ----------------------------
++# implement the --enable-static flag, and support the `static' and
++# `disable-static' LT_INIT options.
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_STATIC],
++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([static],
++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_static=yes ;;
++ no) enable_static=no ;;
++ *)
++ enable_static=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_static=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
++
++ _LT_DECL([build_old_libs], [enable_static], [0],
++ [Whether or not to build static libraries])
++])# _LT_ENABLE_STATIC
++
++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
++
++# Old names:
++AC_DEFUN([AC_ENABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
++])
++
++AC_DEFUN([AC_DISABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], [disable-static])
++])
++
++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_STATIC], [])
++dnl AC_DEFUN([AM_DISABLE_STATIC], [])
++
++
++
++# _LT_ENABLE_FAST_INSTALL([DEFAULT])
++# ----------------------------------
++# implement the --enable-fast-install flag, and support the `fast-install'
++# and `disable-fast-install' LT_INIT options.
++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_FAST_INSTALL],
++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([fast-install],
++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
++ [p=${PACKAGE-default}
++ case $enableval in
++ yes) enable_fast_install=yes ;;
++ no) enable_fast_install=no ;;
++ *)
++ enable_fast_install=no
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for pkg in $enableval; do
++ IFS="$lt_save_ifs"
++ if test "X$pkg" = "X$p"; then
++ enable_fast_install=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
++
++_LT_DECL([fast_install], [enable_fast_install], [0],
++ [Whether or not to optimize for fast installation])dnl
++])# _LT_ENABLE_FAST_INSTALL
++
++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
++
++# Old names:
++AU_DEFUN([AC_ENABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `fast-install' option into LT_INIT's first parameter.])
++])
++
++AU_DEFUN([AC_DISABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `disable-fast-install' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
++
++
++# _LT_WITH_PIC([MODE])
++# --------------------
++# implement the --with-pic flag, and support the `pic-only' and `no-pic'
++# LT_INIT options.
++# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
++m4_define([_LT_WITH_PIC],
++[AC_ARG_WITH([pic],
++ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++ [lt_p=${PACKAGE-default}
++ case $withval in
++ yes|no) pic_mode=$withval ;;
++ *)
++ pic_mode=default
++ # Look at the argument we got. We use all the common list separators.
++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++ for lt_pkg in $withval; do
++ IFS="$lt_save_ifs"
++ if test "X$lt_pkg" = "X$lt_p"; then
++ pic_mode=yes
++ fi
++ done
++ IFS="$lt_save_ifs"
++ ;;
++ esac],
++ [pic_mode=default])
++
++test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
++
++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
++])# _LT_WITH_PIC
++
++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
++
++# Old name:
++AU_DEFUN([AC_LIBTOOL_PICMODE],
++[_LT_SET_OPTION([LT_INIT], [pic-only])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `pic-only' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
++
++## ----------------- ##
++## LTDL_INIT Options ##
++## ----------------- ##
++
++m4_define([_LTDL_MODE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
++ [m4_define([_LTDL_MODE], [nonrecursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [recursive],
++ [m4_define([_LTDL_MODE], [recursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [subproject],
++ [m4_define([_LTDL_MODE], [subproject])])
++
++m4_define([_LTDL_TYPE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [installable],
++ [m4_define([_LTDL_TYPE], [installable])])
++LT_OPTION_DEFINE([LTDL_INIT], [convenience],
++ [m4_define([_LTDL_TYPE], [convenience])])
+diff --git a/libclamav/libmspack-0.4alpha/m4/ltsugar.m4 b/libclamav/libmspack-0.4alpha/m4/ltsugar.m4
+new file mode 100644
+index 000000000000..9000a057d31d
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/m4/ltsugar.m4
+@@ -0,0 +1,123 @@
++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
++#
++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 6 ltsugar.m4
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
++
++
++# lt_join(SEP, ARG1, [ARG2...])
++# -----------------------------
++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
++# associated separator.
++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
++# versions in m4sugar had bugs.
++m4_define([lt_join],
++[m4_if([$#], [1], [],
++ [$#], [2], [[$2]],
++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
++m4_define([_lt_join],
++[m4_if([$#$2], [2], [],
++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
++
++
++# lt_car(LIST)
++# lt_cdr(LIST)
++# ------------
++# Manipulate m4 lists.
++# These macros are necessary as long as will still need to support
++# Autoconf-2.59 which quotes differently.
++m4_define([lt_car], [[$1]])
++m4_define([lt_cdr],
++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
++ [$#], 1, [],
++ [m4_dquote(m4_shift($@))])])
++m4_define([lt_unquote], $1)
++
++
++# lt_append(MACRO-NAME, STRING, [SEPARATOR])
++# ------------------------------------------
++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
++# Note that neither SEPARATOR nor STRING are expanded; they are appended
++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
++# No SEPARATOR is output if MACRO-NAME was previously undefined (different
++# than defined and empty).
++#
++# This macro is needed until we can rely on Autoconf 2.62, since earlier
++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
++m4_define([lt_append],
++[m4_define([$1],
++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
++
++
++
++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
++# ----------------------------------------------------------
++# Produce a SEP delimited list of all paired combinations of elements of
++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
++# has the form PREFIXmINFIXSUFFIXn.
++# Needed until we can rely on m4_combine added in Autoconf 2.62.
++m4_define([lt_combine],
++[m4_if(m4_eval([$# > 3]), [1],
++ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
++[[m4_foreach([_Lt_prefix], [$2],
++ [m4_foreach([_Lt_suffix],
++ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
++ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
++
++
++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
++# -----------------------------------------------------------------------
++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
++m4_define([lt_if_append_uniq],
++[m4_ifdef([$1],
++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
++ [lt_append([$1], [$2], [$3])$4],
++ [$5])],
++ [lt_append([$1], [$2], [$3])$4])])
++
++
++# lt_dict_add(DICT, KEY, VALUE)
++# -----------------------------
++m4_define([lt_dict_add],
++[m4_define([$1($2)], [$3])])
++
++
++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
++# --------------------------------------------
++m4_define([lt_dict_add_subkey],
++[m4_define([$1($2:$3)], [$4])])
++
++
++# lt_dict_fetch(DICT, KEY, [SUBKEY])
++# ----------------------------------
++m4_define([lt_dict_fetch],
++[m4_ifval([$3],
++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
++
++
++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
++# -----------------------------------------------------------------
++m4_define([lt_if_dict_fetch],
++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
++ [$5],
++ [$6])])
++
++
++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
++# --------------------------------------------------------------
++m4_define([lt_dict_filter],
++[m4_if([$5], [], [],
++ [lt_join(m4_quote(m4_default([$4], [[, ]])),
++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
++])
+diff --git a/libclamav/libmspack-0.4alpha/m4/ltversion.m4 b/libclamav/libmspack-0.4alpha/m4/ltversion.m4
+new file mode 100644
+index 000000000000..07a8602d48d6
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/m4/ltversion.m4
+@@ -0,0 +1,23 @@
++# ltversion.m4 -- version numbers -*- Autoconf -*-
++#
++# Copyright (C) 2004 Free Software Foundation, Inc.
++# Written by Scott James Remnant, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# @configure_input@
++
++# serial 3337 ltversion.m4
++# This file is part of GNU Libtool
++
++m4_define([LT_PACKAGE_VERSION], [2.4.2])
++m4_define([LT_PACKAGE_REVISION], [1.3337])
++
++AC_DEFUN([LTVERSION_VERSION],
++[macro_version='2.4.2'
++macro_revision='1.3337'
++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
++_LT_DECL(, macro_revision, 0)
++])
+diff --git a/libclamav/libmspack-0.4alpha/m4/lt~obsolete.m4 b/libclamav/libmspack-0.4alpha/m4/lt~obsolete.m4
+new file mode 100644
+index 000000000000..c573da90c5cc
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/m4/lt~obsolete.m4
+@@ -0,0 +1,98 @@
++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
++#
++# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
++# Written by Scott James Remnant, 2004.
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 5 lt~obsolete.m4
++
++# These exist entirely to fool aclocal when bootstrapping libtool.
++#
++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
++# which have later been changed to m4_define as they aren't part of the
++# exported API, or moved to Autoconf or Automake where they belong.
++#
++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
++# using a macro with the same name in our local m4/libtool.m4 it'll
++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
++# and doesn't know about Autoconf macros at all.)
++#
++# So we provide this file, which has a silly filename so it's always
++# included after everything else. This provides aclocal with the
++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
++# because those macros already exist, or will be overwritten later.
++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
++#
++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
++# Yes, that means every name once taken will need to remain here until
++# we give up compatibility with versions before 1.7, at which point
++# we need to keep only those names which we still refer to.
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
++
++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
++m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
++m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
++m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
++m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
++m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
++m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+diff --git a/libclamav/libmspack-0.4alpha/missing b/libclamav/libmspack-0.4alpha/missing
+new file mode 100755
+index 000000000000..86a8fc31e3c2
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/missing
+@@ -0,0 +1,331 @@
++#! /bin/sh
++# Common stub for a few missing GNU programs while installing.
++
++scriptversion=2012-01-06.13; # UTC
++
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
++# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
++# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program. If not, see <http://www.gnu.org/licenses/>.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++if test $# -eq 0; then
++ echo 1>&2 "Try \`$0 --help' for more information"
++ exit 1
++fi
++
++run=:
++sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
++sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
++
++# In the cases where this matters, `missing' is being run in the
++# srcdir already.
++if test -f configure.ac; then
++ configure_ac=configure.ac
++else
++ configure_ac=configure.in
++fi
++
++msg="missing on your system"
++
++case $1 in
++--run)
++ # Try to run requested program, and just exit if it succeeds.
++ run=
++ shift
++ "$@" && exit 0
++ # Exit code 63 means version mismatch. This often happens
++ # when the user try to use an ancient version of a tool on
++ # a file that requires a minimum version. In this case we
++ # we should proceed has if the program had been absent, or
++ # if --run hadn't been passed.
++ if test $? = 63; then
++ run=:
++ msg="probably too old"
++ fi
++ ;;
++
++ -h|--h|--he|--hel|--help)
++ echo "\
++$0 [OPTION]... PROGRAM [ARGUMENT]...
++
++Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
++error status if there is no known handling for PROGRAM.
++
++Options:
++ -h, --help display this help and exit
++ -v, --version output version information and exit
++ --run try to run the given command, and emulate it if it fails
++
++Supported PROGRAM values:
++ aclocal touch file \`aclocal.m4'
++ autoconf touch file \`configure'
++ autoheader touch file \`config.h.in'
++ autom4te touch the output file, or create a stub one
++ automake touch all \`Makefile.in' files
++ bison create \`y.tab.[ch]', if possible, from existing .[ch]
++ flex create \`lex.yy.c', if possible, from existing .c
++ help2man touch the output file
++ lex create \`lex.yy.c', if possible, from existing .c
++ makeinfo touch the output file
++ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
++
++Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
++\`g' are ignored when checking the name.
++
++Send bug reports to <bug-automake at gnu.org>."
++ exit $?
++ ;;
++
++ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
++ echo "missing $scriptversion (GNU Automake)"
++ exit $?
++ ;;
++
++ -*)
++ echo 1>&2 "$0: Unknown \`$1' option"
++ echo 1>&2 "Try \`$0 --help' for more information"
++ exit 1
++ ;;
++
++esac
++
++# normalize program name to check for.
++program=`echo "$1" | sed '
++ s/^gnu-//; t
++ s/^gnu//; t
++ s/^g//; t'`
++
++# Now exit if we have it, but it failed. Also exit now if we
++# don't have it and --version was passed (most likely to detect
++# the program). This is about non-GNU programs, so use $1 not
++# $program.
++case $1 in
++ lex*|yacc*)
++ # Not GNU programs, they don't have --version.
++ ;;
++
++ *)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++ # Could not run --version or --help. This is probably someone
++ # running `$TOOL --version' or `$TOOL --help' to check whether
++ # $TOOL exists and not knowing $TOOL uses missing.
++ exit 1
++ fi
++ ;;
++esac
++
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case $program in
++ aclocal*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
++ to install the \`Automake' and \`Perl' packages. Grab them from
++ any GNU archive site."
++ touch aclocal.m4
++ ;;
++
++ autoconf*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`${configure_ac}'. You might want to install the
++ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
++ archive site."
++ touch configure
++ ;;
++
++ autoheader*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`acconfig.h' or \`${configure_ac}'. You might want
++ to install the \`Autoconf' and \`GNU m4' packages. Grab them
++ from any GNU archive site."
++ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
++ test -z "$files" && files="config.h"
++ touch_files=
++ for f in $files; do
++ case $f in
++ *:*) touch_files="$touch_files "`echo "$f" |
++ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
++ *) touch_files="$touch_files $f.in";;
++ esac
++ done
++ touch $touch_files
++ ;;
++
++ automake*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
++ You might want to install the \`Automake' and \`Perl' packages.
++ Grab them from any GNU archive site."
++ find . -type f -name Makefile.am -print |
++ sed 's/\.am$/.in/' |
++ while read f; do touch "$f"; done
++ ;;
++
++ autom4te*)
++ echo 1>&2 "\
++WARNING: \`$1' is needed, but is $msg.
++ You might have modified some files without having the
++ proper tools for further handling them.
++ You can get \`$1' as part of \`Autoconf' from any GNU
++ archive site."
++
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++ if test -f "$file"; then
++ touch $file
++ else
++ test -z "$file" || exec >$file
++ echo "#! /bin/sh"
++ echo "# Created by GNU Automake missing as a replacement of"
++ echo "# $ $@"
++ echo "exit 0"
++ chmod +x $file
++ exit 1
++ fi
++ ;;
++
++ bison*|yacc*)
++ echo 1>&2 "\
++WARNING: \`$1' $msg. You should only need it if
++ you modified a \`.y' file. You may need the \`Bison' package
++ in order for those modifications to take effect. You can get
++ \`Bison' from any GNU archive site."
++ rm -f y.tab.c y.tab.h
++ if test $# -ne 1; then
++ eval LASTARG=\${$#}
++ case $LASTARG in
++ *.y)
++ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
++ if test -f "$SRCFILE"; then
++ cp "$SRCFILE" y.tab.c
++ fi
++ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
++ if test -f "$SRCFILE"; then
++ cp "$SRCFILE" y.tab.h
++ fi
++ ;;
++ esac
++ fi
++ if test ! -f y.tab.h; then
++ echo >y.tab.h
++ fi
++ if test ! -f y.tab.c; then
++ echo 'main() { return 0; }' >y.tab.c
++ fi
++ ;;
++
++ lex*|flex*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a \`.l' file. You may need the \`Flex' package
++ in order for those modifications to take effect. You can get
++ \`Flex' from any GNU archive site."
++ rm -f lex.yy.c
++ if test $# -ne 1; then
++ eval LASTARG=\${$#}
++ case $LASTARG in
++ *.l)
++ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
++ if test -f "$SRCFILE"; then
++ cp "$SRCFILE" lex.yy.c
++ fi
++ ;;
++ esac
++ fi
++ if test ! -f lex.yy.c; then
++ echo 'main() { return 0; }' >lex.yy.c
++ fi
++ ;;
++
++ help2man*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a dependency of a manual page. You may need the
++ \`Help2man' package in order for those modifications to take
++ effect. You can get \`Help2man' from any GNU archive site."
++
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++ if test -f "$file"; then
++ touch $file
++ else
++ test -z "$file" || exec >$file
++ echo ".ab help2man is required to generate this page"
++ exit $?
++ fi
++ ;;
++
++ makeinfo*)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a \`.texi' or \`.texinfo' file, or any other file
++ indirectly affecting the aspect of the manual. The spurious
++ call might also be the consequence of using a buggy \`make' (AIX,
++ DU, IRIX). You might want to install the \`Texinfo' package or
++ the \`GNU make' package. Grab either from any GNU archive site."
++ # The file to touch is that specified with -o ...
++ file=`echo "$*" | sed -n "$sed_output"`
++ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++ if test -z "$file"; then
++ # ... or it is the one specified with @setfilename ...
++ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++ file=`sed -n '
++ /^@setfilename/{
++ s/.* \([^ ]*\) *$/\1/
++ p
++ q
++ }' $infile`
++ # ... or it is derived from the source name (dir/f.texi becomes f.info)
++ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
++ fi
++ # If the file does not exist, the user really needs makeinfo;
++ # let's fail without touching anything.
++ test -f $file || exit 1
++ touch $file
++ ;;
++
++ *)
++ echo 1>&2 "\
++WARNING: \`$1' is needed, and is $msg.
++ You might have modified some files without having the
++ proper tools for further handling them. Check the \`README' file,
++ it often tells you about the needed prerequisites for installing
++ this package. You may also peek at any GNU archive site, in case
++ some other package would contain this missing \`$1' program."
++ exit 1
++ ;;
++esac
++
++exit 0
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-time-zone: "UTC"
++# time-stamp-end: "; # UTC"
++# End:
+diff --git a/libclamav/libmspack-0.4alpha/mspack/cab.h b/libclamav/libmspack-0.4alpha/mspack/cab.h
+new file mode 100644
+index 000000000000..9f449d1f29bd
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/cab.h
+@@ -0,0 +1,127 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_CAB_H
++#define MSPACK_CAB_H 1
++
++#include <mszip.h>
++#include <qtm.h>
++#include <lzx.h>
++
++/* generic CAB definitions */
++
++/* structure offsets */
++#define cfhead_Signature (0x00)
++#define cfhead_CabinetSize (0x08)
++#define cfhead_FileOffset (0x10)
++#define cfhead_MinorVersion (0x18)
++#define cfhead_MajorVersion (0x19)
++#define cfhead_NumFolders (0x1A)
++#define cfhead_NumFiles (0x1C)
++#define cfhead_Flags (0x1E)
++#define cfhead_SetID (0x20)
++#define cfhead_CabinetIndex (0x22)
++#define cfhead_SIZEOF (0x24)
++#define cfheadext_HeaderReserved (0x00)
++#define cfheadext_FolderReserved (0x02)
++#define cfheadext_DataReserved (0x03)
++#define cfheadext_SIZEOF (0x04)
++#define cffold_DataOffset (0x00)
++#define cffold_NumBlocks (0x04)
++#define cffold_CompType (0x06)
++#define cffold_SIZEOF (0x08)
++#define cffile_UncompressedSize (0x00)
++#define cffile_FolderOffset (0x04)
++#define cffile_FolderIndex (0x08)
++#define cffile_Date (0x0A)
++#define cffile_Time (0x0C)
++#define cffile_Attribs (0x0E)
++#define cffile_SIZEOF (0x10)
++#define cfdata_CheckSum (0x00)
++#define cfdata_CompressedSize (0x04)
++#define cfdata_UncompressedSize (0x06)
++#define cfdata_SIZEOF (0x08)
++
++/* flags */
++#define cffoldCOMPTYPE_MASK (0x000f)
++#define cffoldCOMPTYPE_NONE (0x0000)
++#define cffoldCOMPTYPE_MSZIP (0x0001)
++#define cffoldCOMPTYPE_QUANTUM (0x0002)
++#define cffoldCOMPTYPE_LZX (0x0003)
++#define cfheadPREV_CABINET (0x0001)
++#define cfheadNEXT_CABINET (0x0002)
++#define cfheadRESERVE_PRESENT (0x0004)
++#define cffileCONTINUED_FROM_PREV (0xFFFD)
++#define cffileCONTINUED_TO_NEXT (0xFFFE)
++#define cffileCONTINUED_PREV_AND_NEXT (0xFFFF)
++
++/* CAB data blocks are <= 32768 bytes in uncompressed form. Uncompressed
++ * blocks have zero growth. MSZIP guarantees that it won't grow above
++ * uncompressed size by more than 12 bytes. LZX guarantees it won't grow
++ * more than 6144 bytes. Quantum has no documentation, but the largest
++ * block seen in the wild is 337 bytes above uncompressed size.
++ */
++#define CAB_BLOCKMAX (32768)
++#define CAB_INPUTMAX (CAB_BLOCKMAX+6144)
++
++/* CAB compression definitions */
++
++struct mscab_compressor_p {
++ struct mscab_compressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++/* CAB decompression definitions */
++
++struct mscabd_decompress_state {
++ struct mscabd_folder_p *folder; /* current folder we're extracting from */
++ struct mscabd_folder_data *data; /* current folder split we're in */
++ unsigned int offset; /* uncompressed offset within folder */
++ unsigned int block; /* which block are we decompressing? */
++ struct mspack_system sys; /* special I/O code for decompressor */
++ int comp_type; /* type of compression used by folder */
++ int (*decompress)(void *, off_t); /* decompressor code */
++ void *state; /* decompressor state */
++ struct mscabd_cabinet_p *incab; /* cabinet where input data comes from */
++ struct mspack_file *infh; /* input file handle */
++ struct mspack_file *outfh; /* output file handle */
++ unsigned char *i_ptr, *i_end; /* input data consumed, end */
++ unsigned char input[CAB_INPUTMAX]; /* one input block of data */
++};
++
++struct mscab_decompressor_p {
++ struct mscab_decompressor base;
++ struct mscabd_decompress_state *d;
++ struct mspack_system *system;
++ int param[3]; /* !!! MATCH THIS TO NUM OF PARAMS IN MSPACK.H !!! */
++ int error, read_error;
++};
++
++struct mscabd_cabinet_p {
++ struct mscabd_cabinet base;
++ off_t blocks_off; /* offset to data blocks */
++ int block_resv; /* reserved space in data blocks */
++};
++
++/* there is one of these for every cabinet a folder spans */
++struct mscabd_folder_data {
++ struct mscabd_folder_data *next;
++ struct mscabd_cabinet_p *cab; /* cabinet file of this folder span */
++ off_t offset; /* cabinet offset of first datablock */
++};
++
++struct mscabd_folder_p {
++ struct mscabd_folder base;
++ struct mscabd_folder_data data; /* where are the data blocks? */
++ struct mscabd_file *merge_prev; /* first file needing backwards merge */
++ struct mscabd_file *merge_next; /* first file needing forwards merge */
++};
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/cabc.c b/libclamav/libmspack-0.4alpha/mspack/cabc.c
+new file mode 100644
+index 000000000000..242e0347c3f9
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/cabc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* CAB compression implementation */
++
++#include <system.h>
++#include <cab.h>
++
++struct mscab_compressor *
++ mspack_create_cab_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_cab_compressor(struct mscab_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/cabd.c b/libclamav/libmspack-0.4alpha/mspack/cabd.c
+new file mode 100644
+index 000000000000..cce5c60e869a
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/cabd.c
+@@ -0,0 +1,1444 @@
++/* This file is part of libmspack.
++ * (C) 2003-2011 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* Cabinet (.CAB) files are a form of file archive. Each cabinet contains
++ * "folders", which are compressed spans of data. Each cabinet has
++ * "files", whose metadata is in the cabinet header, but whose actual data
++ * is stored compressed in one of the "folders". Cabinets can span more
++ * than one physical file on disk, in which case they are a "cabinet set",
++ * and usually the last folder of each cabinet extends into the next
++ * cabinet.
++ *
++ * For a complete description of the format, see the MSDN site:
++ * http://msdn.microsoft.com/en-us/library/bb267310.aspx
++ */
++
++/* CAB decompression implementation */
++
++#include <system.h>
++#include <cab.h>
++#include <assert.h>
++
++/* Notes on compliance with cabinet specification:
++ *
++ * One of the main changes between cabextract 0.6 and libmspack's cab
++ * decompressor is the move from block-oriented decompression to
++ * stream-oriented decompression.
++ *
++ * cabextract would read one data block from disk, decompress it with the
++ * appropriate method, then write the decompressed data. The CAB
++ * specification is specifically designed to work like this, as it ensures
++ * compression matches do not span the maximum decompressed block size
++ * limit of 32kb.
++ *
++ * However, the compression algorithms used are stream oriented, with
++ * specific hacks added to them to enforce the "individual 32kb blocks"
++ * rule in CABs. In other file formats, they do not have this limitation.
++ *
++ * In order to make more generalised decompressors, libmspack's CAB
++ * decompressor has moved from being block-oriented to more stream
++ * oriented. This also makes decompression slightly faster.
++ *
++ * However, this leads to incompliance with the CAB specification. The
++ * CAB controller can no longer ensure each block of input given to the
++ * decompressors is matched with their output. The "decompressed size" of
++ * each individual block is thrown away.
++ *
++ * Each CAB block is supposed to be seen as individually compressed. This
++ * means each consecutive data block can have completely different
++ * "uncompressed" sizes, ranging from 1 to 32768 bytes. However, in
++ * reality, all data blocks in a folder decompress to exactly 32768 bytes,
++ * excepting the final block.
++ *
++ * Given this situation, the decompression algorithms are designed to
++ * realign their input bitstreams on 32768 output-byte boundaries, and
++ * various other special cases have been made. libmspack will not
++ * correctly decompress LZX or Quantum compressed folders where the blocks
++ * do not follow this "32768 bytes until last block" pattern. It could be
++ * implemented if needed, but hopefully this is not necessary -- it has
++ * not been seen in over 3Gb of CAB archives.
++ */
++
++/* prototypes */
++static struct mscabd_cabinet * cabd_open(
++ struct mscab_decompressor *base, const char *filename);
++static void cabd_close(
++ struct mscab_decompressor *base, struct mscabd_cabinet *origcab);
++static int cabd_read_headers(
++ struct mspack_system *sys, struct mspack_file *fh,
++ struct mscabd_cabinet_p *cab, off_t offset, int quiet);
++static char *cabd_read_string(
++ struct mspack_system *sys, struct mspack_file *fh,
++ struct mscabd_cabinet_p *cab, int *error);
++
++static struct mscabd_cabinet *cabd_search(
++ struct mscab_decompressor *base, const char *filename);
++static int cabd_find(
++ struct mscab_decompressor_p *self, unsigned char *buf,
++ struct mspack_file *fh, const char *filename, off_t flen,
++ off_t *firstlen, struct mscabd_cabinet_p **firstcab);
++
++static int cabd_prepend(
++ struct mscab_decompressor *base, struct mscabd_cabinet *cab,
++ struct mscabd_cabinet *prevcab);
++static int cabd_append(
++ struct mscab_decompressor *base, struct mscabd_cabinet *cab,
++ struct mscabd_cabinet *nextcab);
++static int cabd_merge(
++ struct mscab_decompressor *base, struct mscabd_cabinet *lcab,
++ struct mscabd_cabinet *rcab);
++static int cabd_can_merge_folders(
++ struct mspack_system *sys, struct mscabd_folder_p *lfol,
++ struct mscabd_folder_p *rfol);
++
++static int cabd_extract(
++ struct mscab_decompressor *base, struct mscabd_file *file,
++ const char *filename);
++static int cabd_init_decomp(
++ struct mscab_decompressor_p *self, unsigned int ct);
++static void cabd_free_decomp(
++ struct mscab_decompressor_p *self);
++static int cabd_sys_read(
++ struct mspack_file *file, void *buffer, int bytes);
++static int cabd_sys_write(
++ struct mspack_file *file, void *buffer, int bytes);
++static int cabd_sys_read_block(
++ struct mspack_system *sys, struct mscabd_decompress_state *d, int *out,
++ int ignore_cksum);
++static unsigned int cabd_checksum(
++ unsigned char *data, unsigned int bytes, unsigned int cksum);
++static struct noned_state *noned_init(
++ struct mspack_system *sys, struct mspack_file *in, struct mspack_file *out,
++ int bufsize);
++
++static int noned_decompress(
++ struct noned_state *s, off_t bytes);
++static void noned_free(
++ struct noned_state *state);
++
++static int cabd_param(
++ struct mscab_decompressor *base, int param, int value);
++
++static int cabd_error(
++ struct mscab_decompressor *base);
++
++
++/***************************************
++ * MSPACK_CREATE_CAB_DECOMPRESSOR
++ ***************************************
++ * constructor
++ */
++struct mscab_decompressor *
++ mspack_create_cab_decompressor(struct mspack_system *sys)
++{
++ struct mscab_decompressor_p *self = NULL;
++
++ if (!sys) sys = mspack_default_system;
++ if (!mspack_valid_system(sys)) return NULL;
++
++ if ((self = (struct mscab_decompressor_p *) sys->alloc(sys, sizeof(struct mscab_decompressor_p)))) {
++ self->base.open = &cabd_open;
++ self->base.close = &cabd_close;
++ self->base.search = &cabd_search;
++ self->base.extract = &cabd_extract;
++ self->base.prepend = &cabd_prepend;
++ self->base.append = &cabd_append;
++ self->base.set_param = &cabd_param;
++ self->base.last_error = &cabd_error;
++ self->system = sys;
++ self->d = NULL;
++ self->error = MSPACK_ERR_OK;
++
++ self->param[MSCABD_PARAM_SEARCHBUF] = 32768;
++ self->param[MSCABD_PARAM_FIXMSZIP] = 0;
++ self->param[MSCABD_PARAM_DECOMPBUF] = 4096;
++ }
++ return (struct mscab_decompressor *) self;
++}
++
++/***************************************
++ * MSPACK_DESTROY_CAB_DECOMPRESSOR
++ ***************************************
++ * destructor
++ */
++void mspack_destroy_cab_decompressor(struct mscab_decompressor *base) {
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ if (self) {
++ struct mspack_system *sys = self->system;
++ cabd_free_decomp(self);
++ if (self->d) {
++ if (self->d->infh) sys->close(self->d->infh);
++ sys->free(self->d);
++ }
++ sys->free(self);
++ }
++}
++
++
++/***************************************
++ * CABD_OPEN
++ ***************************************
++ * opens a file and tries to read it as a cabinet file
++ */
++static struct mscabd_cabinet *cabd_open(struct mscab_decompressor *base,
++ const char *filename)
++{
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ struct mscabd_cabinet_p *cab = NULL;
++ struct mspack_system *sys;
++ struct mspack_file *fh;
++ int error;
++
++ if (!base) return NULL;
++ sys = self->system;
++
++ if ((fh = sys->open(sys, filename, MSPACK_SYS_OPEN_READ))) {
++ if ((cab = (struct mscabd_cabinet_p *) sys->alloc(sys, sizeof(struct mscabd_cabinet_p)))) {
++ cab->base.filename = filename;
++ error = cabd_read_headers(sys, fh, cab, (off_t) 0, 0);
++ if (error) {
++ cabd_close(base, (struct mscabd_cabinet *) cab);
++ cab = NULL;
++ }
++ self->error = error;
++ }
++ else {
++ self->error = MSPACK_ERR_NOMEMORY;
++ }
++ sys->close(fh);
++ }
++ else {
++ self->error = MSPACK_ERR_OPEN;
++ }
++ return (struct mscabd_cabinet *) cab;
++}
++
++/***************************************
++ * CABD_CLOSE
++ ***************************************
++ * frees all memory associated with a given mscabd_cabinet.
++ */
++static void cabd_close(struct mscab_decompressor *base,
++ struct mscabd_cabinet *origcab)
++{
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ struct mscabd_folder_data *dat, *ndat;
++ struct mscabd_cabinet *cab, *ncab;
++ struct mscabd_folder *fol, *nfol;
++ struct mscabd_file *fi, *nfi;
++ struct mspack_system *sys;
++
++ if (!base) return;
++ sys = self->system;
++
++ self->error = MSPACK_ERR_OK;
++
++ while (origcab) {
++ /* free files */
++ for (fi = origcab->files; fi; fi = nfi) {
++ nfi = fi->next;
++ sys->free(fi->filename);
++ sys->free(fi);
++ }
++
++ /* free folders */
++ for (fol = origcab->folders; fol; fol = nfol) {
++ nfol = fol->next;
++
++ /* free folder decompression state if it has been decompressed */
++ if (self->d && (self->d->folder == (struct mscabd_folder_p *) fol)) {
++ if (self->d->infh) sys->close(self->d->infh);
++ cabd_free_decomp(self);
++ sys->free(self->d);
++ self->d = NULL;
++ }
++
++ /* free folder data segments */
++ for (dat = ((struct mscabd_folder_p *)fol)->data.next; dat; dat = ndat) {
++ ndat = dat->next;
++ sys->free(dat);
++ }
++ sys->free(fol);
++ }
++
++ /* free predecessor cabinets (and the original cabinet's strings) */
++ for (cab = origcab; cab; cab = ncab) {
++ ncab = cab->prevcab;
++ sys->free(cab->prevname);
++ sys->free(cab->nextname);
++ sys->free(cab->previnfo);
++ sys->free(cab->nextinfo);
++ if (cab != origcab) sys->free(cab);
++ }
++
++ /* free successor cabinets */
++ for (cab = origcab->nextcab; cab; cab = ncab) {
++ ncab = cab->nextcab;
++ sys->free(cab->prevname);
++ sys->free(cab->nextname);
++ sys->free(cab->previnfo);
++ sys->free(cab->nextinfo);
++ sys->free(cab);
++ }
++
++ /* free actual cabinet structure */
++ cab = origcab->next;
++ sys->free(origcab);
++
++ /* repeat full procedure again with the cab->next pointer (if set) */
++ origcab = cab;
++ }
++}
++
++/***************************************
++ * CABD_READ_HEADERS
++ ***************************************
++ * reads the cabinet file header, folder list and file list.
++ * fills out a pre-existing mscabd_cabinet structure, allocates memory
++ * for folders and files as necessary
++ */
++static int cabd_read_headers(struct mspack_system *sys,
++ struct mspack_file *fh,
++ struct mscabd_cabinet_p *cab,
++ off_t offset, int quiet)
++{
++ int num_folders, num_files, folder_resv, i, x;
++ struct mscabd_folder_p *fol, *linkfol = NULL;
++ struct mscabd_file *file, *linkfile = NULL;
++ unsigned char buf[64];
++
++ /* initialise pointers */
++ cab->base.next = NULL;
++ cab->base.files = NULL;
++ cab->base.folders = NULL;
++ cab->base.prevcab = cab->base.nextcab = NULL;
++ cab->base.prevname = cab->base.nextname = NULL;
++ cab->base.previnfo = cab->base.nextinfo = NULL;
++
++ cab->base.base_offset = offset;
++
++ /* seek to CFHEADER */
++ if (sys->seek(fh, offset, MSPACK_SYS_SEEK_START)) {
++ return MSPACK_ERR_SEEK;
++ }
++
++ /* read in the CFHEADER */
++ if (sys->read(fh, &buf[0], cfhead_SIZEOF) != cfhead_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* check for "MSCF" signature */
++ if (EndGetI32(&buf[cfhead_Signature]) != 0x4643534D) {
++ return MSPACK_ERR_SIGNATURE;
++ }
++
++ /* some basic header fields */
++ cab->base.length = EndGetI32(&buf[cfhead_CabinetSize]);
++ cab->base.set_id = EndGetI16(&buf[cfhead_SetID]);
++ cab->base.set_index = EndGetI16(&buf[cfhead_CabinetIndex]);
++
++ /* get the number of folders */
++ num_folders = EndGetI16(&buf[cfhead_NumFolders]);
++ if (num_folders == 0) {
++ if (!quiet) sys->message(fh, "no folders in cabinet.");
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* get the number of files */
++ num_files = EndGetI16(&buf[cfhead_NumFiles]);
++ if (num_files == 0) {
++ if (!quiet) sys->message(fh, "no files in cabinet.");
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* check cabinet version */
++ if ((buf[cfhead_MajorVersion] != 1) && (buf[cfhead_MinorVersion] != 3)) {
++ if (!quiet) sys->message(fh, "WARNING; cabinet version is not 1.3");
++ }
++
++ /* read the reserved-sizes part of header, if present */
++ cab->base.flags = EndGetI16(&buf[cfhead_Flags]);
++ if (cab->base.flags & cfheadRESERVE_PRESENT) {
++ if (sys->read(fh, &buf[0], cfheadext_SIZEOF) != cfheadext_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++ cab->base.header_resv = EndGetI16(&buf[cfheadext_HeaderReserved]);
++ folder_resv = buf[cfheadext_FolderReserved];
++ cab->block_resv = buf[cfheadext_DataReserved];
++
++ if (cab->base.header_resv > 60000) {
++ if (!quiet) sys->message(fh, "WARNING; reserved header > 60000.");
++ }
++
++ /* skip the reserved header */
++ if (cab->base.header_resv) {
++ if (sys->seek(fh, (off_t) cab->base.header_resv, MSPACK_SYS_SEEK_CUR)) {
++ return MSPACK_ERR_SEEK;
++ }
++ }
++ }
++ else {
++ cab->base.header_resv = 0;
++ folder_resv = 0;
++ cab->block_resv = 0;
++ }
++
++ /* read name and info of preceeding cabinet in set, if present */
++ if (cab->base.flags & cfheadPREV_CABINET) {
++ cab->base.prevname = cabd_read_string(sys, fh, cab, &x); if (x) return x;
++ cab->base.previnfo = cabd_read_string(sys, fh, cab, &x); if (x) return x;
++ }
++
++ /* read name and info of next cabinet in set, if present */
++ if (cab->base.flags & cfheadNEXT_CABINET) {
++ cab->base.nextname = cabd_read_string(sys, fh, cab, &x); if (x) return x;
++ cab->base.nextinfo = cabd_read_string(sys, fh, cab, &x); if (x) return x;
++ }
++
++ /* read folders */
++ for (i = 0; i < num_folders; i++) {
++ if (sys->read(fh, &buf[0], cffold_SIZEOF) != cffold_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++ if (folder_resv) {
++ if (sys->seek(fh, (off_t) folder_resv, MSPACK_SYS_SEEK_CUR)) {
++ return MSPACK_ERR_SEEK;
++ }
++ }
++
++ if (!(fol = (struct mscabd_folder_p *) sys->alloc(sys, sizeof(struct mscabd_folder_p)))) {
++ return MSPACK_ERR_NOMEMORY;
++ }
++ fol->base.next = NULL;
++ fol->base.comp_type = EndGetI16(&buf[cffold_CompType]);
++ fol->base.num_blocks = EndGetI16(&buf[cffold_NumBlocks]);
++ fol->data.next = NULL;
++ fol->data.cab = (struct mscabd_cabinet_p *) cab;
++ fol->data.offset = offset + (off_t)
++ ( (unsigned int) EndGetI32(&buf[cffold_DataOffset]) );
++ fol->merge_prev = NULL;
++ fol->merge_next = NULL;
++
++ /* link folder into list of folders */
++ if (!linkfol) cab->base.folders = (struct mscabd_folder *) fol;
++ else linkfol->base.next = (struct mscabd_folder *) fol;
++ linkfol = fol;
++ }
++
++ /* read files */
++ for (i = 0; i < num_files; i++) {
++ if (sys->read(fh, &buf[0], cffile_SIZEOF) != cffile_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ if (!(file = (struct mscabd_file *) sys->alloc(sys, sizeof(struct mscabd_file)))) {
++ return MSPACK_ERR_NOMEMORY;
++ }
++
++ file->next = NULL;
++ file->length = EndGetI32(&buf[cffile_UncompressedSize]);
++ file->attribs = EndGetI16(&buf[cffile_Attribs]);
++ file->offset = EndGetI32(&buf[cffile_FolderOffset]);
++
++ /* set folder pointer */
++ x = EndGetI16(&buf[cffile_FolderIndex]);
++ if (x < cffileCONTINUED_FROM_PREV) {
++ /* normal folder index; count up to the correct folder. the folder
++ * pointer will be NULL if folder index is invalid */
++ struct mscabd_folder *ifol = cab->base.folders;
++ while (x--) if (ifol) ifol = ifol->next;
++ file->folder = ifol;
++
++ if (!ifol) {
++ sys->free(file);
++ D(("invalid folder index"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++ }
++ else {
++ /* either CONTINUED_TO_NEXT, CONTINUED_FROM_PREV or
++ * CONTINUED_PREV_AND_NEXT */
++ if ((x == cffileCONTINUED_TO_NEXT) ||
++ (x == cffileCONTINUED_PREV_AND_NEXT))
++ {
++ /* get last folder */
++ struct mscabd_folder *ifol = cab->base.folders;
++ while (ifol->next) ifol = ifol->next;
++ file->folder = ifol;
++
++ /* set "merge next" pointer */
++ fol = (struct mscabd_folder_p *) ifol;
++ if (!fol->merge_next) fol->merge_next = file;
++ }
++
++ if ((x == cffileCONTINUED_FROM_PREV) ||
++ (x == cffileCONTINUED_PREV_AND_NEXT))
++ {
++ /* get first folder */
++ file->folder = cab->base.folders;
++
++ /* set "merge prev" pointer */
++ fol = (struct mscabd_folder_p *) file->folder;
++ if (!fol->merge_prev) fol->merge_prev = file;
++ }
++ }
++
++ /* get time */
++ x = EndGetI16(&buf[cffile_Time]);
++ file->time_h = x >> 11;
++ file->time_m = (x >> 5) & 0x3F;
++ file->time_s = (x << 1) & 0x3E;
++
++ /* get date */
++ x = EndGetI16(&buf[cffile_Date]);
++ file->date_d = x & 0x1F;
++ file->date_m = (x >> 5) & 0xF;
++ file->date_y = (x >> 9) + 1980;
++
++ /* get filename */
++ file->filename = cabd_read_string(sys, fh, cab, &x);
++ if (x) {
++ sys->free(file);
++ return x;
++ }
++
++ /* link file entry into file list */
++ if (!linkfile) cab->base.files = file;
++ else linkfile->next = file;
++ linkfile = file;
++ }
++
++ return MSPACK_ERR_OK;
++}
++
++static char *cabd_read_string(struct mspack_system *sys,
++ struct mspack_file *fh,
++ struct mscabd_cabinet_p *cab, int *error)
++{
++ off_t base = sys->tell(fh);
++ char buf[256], *str;
++ unsigned int len, i, ok;
++
++ /* read up to 256 bytes */
++ len = sys->read(fh, &buf[0], 256);
++
++ /* search for a null terminator in the buffer */
++ for (i = 0, ok = 0; i < len; i++) if (!buf[i]) { ok = 1; break; }
++ if (!ok) {
++ *error = MSPACK_ERR_DATAFORMAT;
++ return NULL;
++ }
++
++ len = i + 1;
++
++ /* set the data stream to just after the string and return */
++ if (sys->seek(fh, base + (off_t)len, MSPACK_SYS_SEEK_START)) {
++ *error = MSPACK_ERR_SEEK;
++ return NULL;
++ }
++
++ if (!(str = (char *) sys->alloc(sys, len))) {
++ *error = MSPACK_ERR_NOMEMORY;
++ return NULL;
++ }
++
++ sys->copy(&buf[0], str, len);
++ *error = MSPACK_ERR_OK;
++ return str;
++}
++
++/***************************************
++ * CABD_SEARCH, CABD_FIND
++ ***************************************
++ * cabd_search opens a file, finds its extent, allocates a search buffer,
++ * then reads through the whole file looking for possible cabinet headers.
++ * if it finds any, it tries to read them as real cabinets. returns a linked
++ * list of results
++ *
++ * cabd_find is the inner loop of cabd_search, to make it easier to
++ * break out of the loop and be sure that all resources are freed
++ */
++static struct mscabd_cabinet *cabd_search(struct mscab_decompressor *base,
++ const char *filename)
++{
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ struct mscabd_cabinet_p *cab = NULL;
++ struct mspack_system *sys;
++ unsigned char *search_buf;
++ struct mspack_file *fh;
++ off_t filelen, firstlen = 0;
++
++ if (!base) return NULL;
++ sys = self->system;
++
++ /* allocate a search buffer */
++ search_buf = (unsigned char *) sys->alloc(sys, (size_t) self->param[MSCABD_PARAM_SEARCHBUF]);
++ if (!search_buf) {
++ self->error = MSPACK_ERR_NOMEMORY;
++ return NULL;
++ }
++
++ /* open file and get its full file length */
++ if ((fh = sys->open(sys, filename, MSPACK_SYS_OPEN_READ))) {
++ if (!(self->error = mspack_sys_filelen(sys, fh, &filelen))) {
++ self->error = cabd_find(self, search_buf, fh, filename,
++ filelen, &firstlen, &cab);
++ }
++
++ /* truncated / extraneous data warning: */
++ if (firstlen && (firstlen != filelen) &&
++ (!cab || (cab->base.base_offset == 0)))
++ {
++ if (firstlen < filelen) {
++ sys->message(fh, "WARNING; possible %" LD
++ " extra bytes at end of file.",
++ filelen - firstlen);
++ }
++ else {
++ sys->message(fh, "WARNING; file possibly truncated by %" LD " bytes.",
++ firstlen - filelen);
++ }
++ }
++
++ sys->close(fh);
++ }
++ else {
++ self->error = MSPACK_ERR_OPEN;
++ }
++
++ /* free the search buffer */
++ sys->free(search_buf);
++
++ return (struct mscabd_cabinet *) cab;
++}
++
++static int cabd_find(struct mscab_decompressor_p *self, unsigned char *buf,
++ struct mspack_file *fh, const char *filename, off_t flen,
++ off_t *firstlen, struct mscabd_cabinet_p **firstcab)
++{
++ struct mscabd_cabinet_p *cab, *link = NULL;
++ off_t caboff, offset, length;
++ struct mspack_system *sys = self->system;
++ unsigned char *p, *pend, state = 0;
++ unsigned int cablen_u32 = 0, foffset_u32 = 0;
++ int false_cabs = 0;
++
++#ifndef LARGEFILE_SUPPORT
++ /* detect 32-bit off_t overflow */
++ if (flen < 0) {
++ sys->message(fh, largefile_msg);
++ return MSPACK_ERR_OK;
++ }
++#endif
++
++ /* search through the full file length */
++ for (offset = 0; offset < flen; offset += length) {
++ /* search length is either the full length of the search buffer, or the
++ * amount of data remaining to the end of the file, whichever is less. */
++ length = flen - offset;
++ if (length > self->param[MSCABD_PARAM_SEARCHBUF]) {
++ length = self->param[MSCABD_PARAM_SEARCHBUF];
++ }
++
++ /* fill the search buffer with data from disk */
++ if (sys->read(fh, &buf[0], (int) length) != (int) length) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* FAQ avoidance strategy */
++ if ((offset == 0) && (EndGetI32(&buf[0]) == 0x28635349)) {
++ sys->message(fh, "WARNING; found InstallShield header. "
++ "This is probably an InstallShield file. "
++ "Use UNSHIELD from www.synce.org to unpack it.");
++ }
++
++ /* read through the entire buffer. */
++ for (p = &buf[0], pend = &buf[length]; p < pend; ) {
++ switch (state) {
++ /* starting state */
++ case 0:
++ /* we spend most of our time in this while loop, looking for
++ * a leading 'M' of the 'MSCF' signature */
++ while (p < pend && *p != 0x4D) p++;
++ /* if we found tht 'M', advance state */
++ if (p++ < pend) state = 1;
++ break;
++
++ /* verify that the next 3 bytes are 'S', 'C' and 'F' */
++ case 1: state = (*p++ == 0x53) ? 2 : 0; break;
++ case 2: state = (*p++ == 0x43) ? 3 : 0; break;
++ case 3: state = (*p++ == 0x46) ? 4 : 0; break;
++
++ /* we don't care about bytes 4-7 (see default: for action) */
++
++ /* bytes 8-11 are the overall length of the cabinet */
++ case 8: cablen_u32 = *p++; state++; break;
++ case 9: cablen_u32 |= *p++ << 8; state++; break;
++ case 10: cablen_u32 |= *p++ << 16; state++; break;
++ case 11: cablen_u32 |= *p++ << 24; state++; break;
++
++ /* we don't care about bytes 12-15 (see default: for action) */
++
++ /* bytes 16-19 are the offset within the cabinet of the filedata */
++ case 16: foffset_u32 = *p++; state++; break;
++ case 17: foffset_u32 |= *p++ << 8; state++; break;
++ case 18: foffset_u32 |= *p++ << 16; state++; break;
++ case 19: foffset_u32 |= *p++ << 24;
++ /* now we have recieved 20 bytes of potential cab header. work out
++ * the offset in the file of this potential cabinet */
++ caboff = offset + (p - &buf[0]) - 20;
++
++ /* should reading cabinet fail, restart search just after 'MSCF' */
++ offset = caboff + 4;
++
++ /* capture the "length of cabinet" field if there is a cabinet at
++ * offset 0 in the file, regardless of whether the cabinet can be
++ * read correctly or not */
++ if (caboff == 0) *firstlen = (off_t) cablen_u32;
++
++ /* check that the files offset is less than the alleged length of
++ * the cabinet, and that the offset + the alleged length are
++ * 'roughly' within the end of overall file length */
++ if ((foffset_u32 < cablen_u32) &&
++ ((caboff + (off_t) foffset_u32) < (flen + 32)) &&
++ ((caboff + (off_t) cablen_u32) < (flen + 32)) )
++ {
++ /* likely cabinet found -- try reading it */
++ if (!(cab = (struct mscabd_cabinet_p *) sys->alloc(sys, sizeof(struct mscabd_cabinet_p)))) {
++ return MSPACK_ERR_NOMEMORY;
++ }
++ cab->base.filename = filename;
++ if (cabd_read_headers(sys, fh, cab, caboff, 1)) {
++ /* destroy the failed cabinet */
++ cabd_close((struct mscab_decompressor *) self,
++ (struct mscabd_cabinet *) cab);
++ false_cabs++;
++ }
++ else {
++ /* cabinet read correctly! */
++
++ /* link the cab into the list */
++ if (!link) *firstcab = cab;
++ else link->base.next = (struct mscabd_cabinet *) cab;
++ link = cab;
++
++ /* cause the search to restart after this cab's data. */
++ offset = caboff + (off_t) cablen_u32;
++
++#ifndef LARGEFILE_SUPPORT
++ /* detect 32-bit off_t overflow */
++ if (offset < caboff) {
++ sys->message(fh, largefile_msg);
++ return MSPACK_ERR_OK;
++ }
++#endif
++ }
++ }
++
++ /* restart search */
++ if (offset >= flen) return MSPACK_ERR_OK;
++ if (sys->seek(fh, offset, MSPACK_SYS_SEEK_START)) {
++ return MSPACK_ERR_SEEK;
++ }
++ length = 0;
++ p = pend;
++ state = 0;
++ break;
++
++ /* for bytes 4-7 and 12-15, just advance state/pointer */
++ default:
++ p++, state++;
++ } /* switch(state) */
++ } /* for (... p < pend ...) */
++ } /* for (... offset < length ...) */
++
++ if (false_cabs) {
++ D(("%d false cabinets found", false_cabs))
++ }
++
++ return MSPACK_ERR_OK;
++}
++
++/***************************************
++ * CABD_MERGE, CABD_PREPEND, CABD_APPEND
++ ***************************************
++ * joins cabinets together, also merges split folders between these two
++ * cabinets only. This includes freeing the duplicate folder and file(s)
++ * and allocating a further mscabd_folder_data structure to append to the
++ * merged folder's data parts list.
++ */
++static int cabd_prepend(struct mscab_decompressor *base,
++ struct mscabd_cabinet *cab,
++ struct mscabd_cabinet *prevcab)
++{
++ return cabd_merge(base, prevcab, cab);
++}
++
++static int cabd_append(struct mscab_decompressor *base,
++ struct mscabd_cabinet *cab,
++ struct mscabd_cabinet *nextcab)
++{
++ return cabd_merge(base, cab, nextcab);
++}
++
++static int cabd_merge(struct mscab_decompressor *base,
++ struct mscabd_cabinet *lcab,
++ struct mscabd_cabinet *rcab)
++{
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ struct mscabd_folder_data *data, *ndata;
++ struct mscabd_folder_p *lfol, *rfol;
++ struct mscabd_file *fi, *rfi, *lfi;
++ struct mscabd_cabinet *cab;
++ struct mspack_system *sys;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ sys = self->system;
++
++ /* basic args check */
++ if (!lcab || !rcab || (lcab == rcab)) {
++ D(("lcab NULL, rcab NULL or lcab = rcab"))
++ return self->error = MSPACK_ERR_ARGS;
++ }
++
++ /* check there's not already a cabinet attached */
++ if (lcab->nextcab || rcab->prevcab) {
++ D(("cabs already joined"))
++ return self->error = MSPACK_ERR_ARGS;
++ }
++
++ /* do not create circular cabinet chains */
++ for (cab = lcab->prevcab; cab; cab = cab->prevcab) {
++ if (cab == rcab) {D(("circular!")) return self->error = MSPACK_ERR_ARGS;}
++ }
++ for (cab = rcab->nextcab; cab; cab = cab->nextcab) {
++ if (cab == lcab) {D(("circular!")) return self->error = MSPACK_ERR_ARGS;}
++ }
++
++ /* warn about odd set IDs or indices */
++ if (lcab->set_id != rcab->set_id) {
++ sys->message(NULL, "WARNING; merged cabinets with differing Set IDs.");
++ }
++
++ if (lcab->set_index > rcab->set_index) {
++ sys->message(NULL, "WARNING; merged cabinets with odd order.");
++ }
++
++ /* merging the last folder in lcab with the first folder in rcab */
++ lfol = (struct mscabd_folder_p *) lcab->folders;
++ rfol = (struct mscabd_folder_p *) rcab->folders;
++ while (lfol->base.next) lfol = (struct mscabd_folder_p *) lfol->base.next;
++
++ /* do we need to merge folders? */
++ if (!lfol->merge_next && !rfol->merge_prev) {
++ /* no, at least one of the folders is not for merging */
++
++ /* attach cabs */
++ lcab->nextcab = rcab;
++ rcab->prevcab = lcab;
++
++ /* attach folders */
++ lfol->base.next = (struct mscabd_folder *) rfol;
++
++ /* attach files */
++ fi = lcab->files;
++ while (fi->next) fi = fi->next;
++ fi->next = rcab->files;
++ }
++ else {
++ /* folder merge required - do the files match? */
++ if (! cabd_can_merge_folders(sys, lfol, rfol)) {
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* allocate a new folder data structure */
++ if (!(data = (struct mscabd_folder_data *) sys->alloc(sys, sizeof(struct mscabd_folder_data)))) {
++ return self->error = MSPACK_ERR_NOMEMORY;
++ }
++
++ /* attach cabs */
++ lcab->nextcab = rcab;
++ rcab->prevcab = lcab;
++
++ /* append rfol's data to lfol */
++ ndata = &lfol->data;
++ while (ndata->next) ndata = ndata->next;
++ ndata->next = data;
++ *data = rfol->data;
++ rfol->data.next = NULL;
++
++ /* lfol becomes rfol.
++ * NOTE: special case, don't merge if rfol is merge prev and next,
++ * rfol->merge_next is going to be deleted, so keep lfol's version
++ * instead */
++ lfol->base.num_blocks += rfol->base.num_blocks - 1;
++ if ((rfol->merge_next == NULL) ||
++ (rfol->merge_next->folder != (struct mscabd_folder *) rfol))
++ {
++ lfol->merge_next = rfol->merge_next;
++ }
++
++ /* attach the rfol's folder (except the merge folder) */
++ while (lfol->base.next) lfol = (struct mscabd_folder_p *) lfol->base.next;
++ lfol->base.next = rfol->base.next;
++
++ /* free disused merge folder */
++ sys->free(rfol);
++
++ /* attach rfol's files */
++ fi = lcab->files;
++ while (fi->next) fi = fi->next;
++ fi->next = rcab->files;
++
++ /* delete all files from rfol's merge folder */
++ lfi = NULL;
++ for (fi = lcab->files; fi ; fi = rfi) {
++ rfi = fi->next;
++ /* if file's folder matches the merge folder, unlink and free it */
++ if (fi->folder == (struct mscabd_folder *) rfol) {
++ if (lfi) lfi->next = rfi; else lcab->files = rfi;
++ sys->free(fi->filename);
++ sys->free(fi);
++ }
++ else lfi = fi;
++ }
++ }
++
++ /* all done! fix files and folders pointers in all cabs so they all
++ * point to the same list */
++ for (cab = lcab->prevcab; cab; cab = cab->prevcab) {
++ cab->files = lcab->files;
++ cab->folders = lcab->folders;
++ }
++
++ for (cab = lcab->nextcab; cab; cab = cab->nextcab) {
++ cab->files = lcab->files;
++ cab->folders = lcab->folders;
++ }
++
++ return self->error = MSPACK_ERR_OK;
++}
++
++/* decides if two folders are OK to merge */
++static int cabd_can_merge_folders(struct mspack_system *sys,
++ struct mscabd_folder_p *lfol,
++ struct mscabd_folder_p *rfol)
++{
++ struct mscabd_file *lfi, *rfi, *l, *r;
++ int matching = 1;
++
++ /* check that both folders use the same compression method/settings */
++ if (lfol->base.comp_type != rfol->base.comp_type) {
++ D(("folder merge: compression type mismatch"))
++ return 0;
++ }
++
++ if (!(lfi = lfol->merge_next) || !(rfi = rfol->merge_prev)) {
++ D(("folder merge: one cabinet has no files to merge"))
++ return 0;
++ }
++
++ /* for all files in lfol (which is the last folder in whichever cab and
++ * only has files to merge), compare them to the files from rfol. They
++ * should be identical in number and order. to verify this, check the
++ * offset and length of each file. */
++ for (l=lfi, r=rfi; l; l=l->next, r=r->next) {
++ if (!r || (l->offset != r->offset) || (l->length != r->length)) {
++ matching = 0;
++ break;
++ }
++ }
++
++ if (matching) return 1;
++
++ /* if rfol does not begin with an identical copy of the files in lfol, make
++ * make a judgement call; if at least ONE file from lfol is in rfol, allow
++ * the merge with a warning about missing files. */
++ matching = 0;
++ for (l = lfi; l; l = l->next) {
++ for (r = rfi; r; r = r->next) {
++ if (l->offset == r->offset && l->length == r->length) break;
++ }
++ if (r) matching = 1; else sys->message(NULL,
++ "WARNING; merged file %s not listed in both cabinets", l->filename);
++ }
++ return matching;
++}
++
++
++/***************************************
++ * CABD_EXTRACT
++ ***************************************
++ * extracts a file from a cabinet
++ */
++static int cabd_extract(struct mscab_decompressor *base,
++ struct mscabd_file *file, const char *filename)
++{
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ struct mscabd_folder_p *fol;
++ struct mspack_system *sys;
++ struct mspack_file *fh;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ if (!file) return self->error = MSPACK_ERR_ARGS;
++
++ sys = self->system;
++ fol = (struct mscabd_folder_p *) file->folder;
++
++ /* check if file can be extracted */
++ if ((!fol) || (fol->merge_prev) ||
++ (((file->offset + file->length) / CAB_BLOCKMAX) > fol->base.num_blocks))
++ {
++ sys->message(NULL, "ERROR; file \"%s\" cannot be extracted, "
++ "cabinet set is incomplete.", file->filename);
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* allocate generic decompression state */
++ if (!self->d) {
++ self->d = (struct mscabd_decompress_state *) sys->alloc(sys, sizeof(struct mscabd_decompress_state));
++ if (!self->d) return self->error = MSPACK_ERR_NOMEMORY;
++ self->d->folder = NULL;
++ self->d->data = NULL;
++ self->d->sys = *sys;
++ self->d->sys.read = &cabd_sys_read;
++ self->d->sys.write = &cabd_sys_write;
++ self->d->state = NULL;
++ self->d->infh = NULL;
++ self->d->incab = NULL;
++ }
++
++ /* do we need to change folder or reset the current folder? */
++ if ((self->d->folder != fol) || (self->d->offset > file->offset)) {
++ /* do we need to open a new cab file? */
++ if (!self->d->infh || (fol->data.cab != self->d->incab)) {
++ /* close previous file handle if from a different cab */
++ if (self->d->infh) sys->close(self->d->infh);
++ self->d->incab = fol->data.cab;
++ self->d->infh = sys->open(sys, fol->data.cab->base.filename,
++ MSPACK_SYS_OPEN_READ);
++ if (!self->d->infh) return self->error = MSPACK_ERR_OPEN;
++ }
++ /* seek to start of data blocks */
++ if (sys->seek(self->d->infh, fol->data.offset, MSPACK_SYS_SEEK_START)) {
++ return self->error = MSPACK_ERR_SEEK;
++ }
++
++ /* set up decompressor */
++ if (cabd_init_decomp(self, (unsigned int) fol->base.comp_type)) {
++ return self->error;
++ }
++
++ /* initialise new folder state */
++ self->d->folder = fol;
++ self->d->data = &fol->data;
++ self->d->offset = 0;
++ self->d->block = 0;
++ self->d->i_ptr = self->d->i_end = &self->d->input[0];
++
++ /* read_error lasts for the lifetime of a decompressor */
++ self->read_error = MSPACK_ERR_OK;
++ }
++
++ /* open file for output */
++ if (!(fh = sys->open(sys, filename, MSPACK_SYS_OPEN_WRITE))) {
++ return self->error = MSPACK_ERR_OPEN;
++ }
++
++ self->error = MSPACK_ERR_OK;
++
++ /* if file has more than 0 bytes */
++ if (file->length) {
++ off_t bytes;
++ int error;
++ /* get to correct offset.
++ * - use NULL fh to say 'no writing' to cabd_sys_write()
++ * - if cabd_sys_read() has an error, it will set self->read_error
++ * and pass back MSPACK_ERR_READ
++ */
++ self->d->outfh = NULL;
++ if ((bytes = file->offset - self->d->offset)) {
++ error = self->d->decompress(self->d->state, bytes);
++ self->error = (error == MSPACK_ERR_READ) ? self->read_error : error;
++ }
++
++ /* if getting to the correct offset was error free, unpack file */
++ if (!self->error) {
++ self->d->outfh = fh;
++ error = self->d->decompress(self->d->state, (off_t) file->length);
++ self->error = (error == MSPACK_ERR_READ) ? self->read_error : error;
++ }
++ }
++
++ /* close output file */
++ sys->close(fh);
++ self->d->outfh = NULL;
++
++ return self->error;
++}
++
++/***************************************
++ * CABD_INIT_DECOMP, CABD_FREE_DECOMP
++ ***************************************
++ * cabd_init_decomp initialises decompression state, according to which
++ * decompression method was used. relies on self->d->folder being the same
++ * as when initialised.
++ *
++ * cabd_free_decomp frees decompression state, according to which method
++ * was used.
++ */
++static int cabd_init_decomp(struct mscab_decompressor_p *self, unsigned int ct)
++{
++ struct mspack_file *fh = (struct mspack_file *) self;
++
++ assert(self && self->d);
++
++ /* free any existing decompressor */
++ cabd_free_decomp(self);
++
++ self->d->comp_type = ct;
++
++ switch (ct & cffoldCOMPTYPE_MASK) {
++ case cffoldCOMPTYPE_NONE:
++ self->d->decompress = (int (*)(void *, off_t)) &noned_decompress;
++ self->d->state = noned_init(&self->d->sys, fh, fh,
++ self->param[MSCABD_PARAM_DECOMPBUF]);
++ break;
++ case cffoldCOMPTYPE_MSZIP:
++ self->d->decompress = (int (*)(void *, off_t)) &mszipd_decompress;
++ self->d->state = mszipd_init(&self->d->sys, fh, fh,
++ self->param[MSCABD_PARAM_DECOMPBUF],
++ self->param[MSCABD_PARAM_FIXMSZIP]);
++ break;
++ case cffoldCOMPTYPE_QUANTUM:
++ self->d->decompress = (int (*)(void *, off_t)) &qtmd_decompress;
++ self->d->state = qtmd_init(&self->d->sys, fh, fh, (int) (ct >> 8) & 0x1f,
++ self->param[MSCABD_PARAM_DECOMPBUF]);
++ break;
++ case cffoldCOMPTYPE_LZX:
++ self->d->decompress = (int (*)(void *, off_t)) &lzxd_decompress;
++ self->d->state = lzxd_init(&self->d->sys, fh, fh, (int) (ct >> 8) & 0x1f, 0,
++ self->param[MSCABD_PARAM_DECOMPBUF], (off_t)0,0);
++ break;
++ default:
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++ return self->error = (self->d->state) ? MSPACK_ERR_OK : MSPACK_ERR_NOMEMORY;
++}
++
++static void cabd_free_decomp(struct mscab_decompressor_p *self) {
++ if (!self || !self->d || !self->d->folder || !self->d->state) return;
++
++ switch (self->d->comp_type & cffoldCOMPTYPE_MASK) {
++ case cffoldCOMPTYPE_NONE: noned_free((struct noned_state *) self->d->state); break;
++ case cffoldCOMPTYPE_MSZIP: mszipd_free((struct mszipd_stream *) self->d->state); break;
++ case cffoldCOMPTYPE_QUANTUM: qtmd_free((struct qtmd_stream *) self->d->state); break;
++ case cffoldCOMPTYPE_LZX: lzxd_free((struct lzxd_stream *) self->d->state); break;
++ }
++ self->d->decompress = NULL;
++ self->d->state = NULL;
++}
++
++/***************************************
++ * CABD_SYS_READ, CABD_SYS_WRITE
++ ***************************************
++ * cabd_sys_read is the internal reader function which the decompressors
++ * use. will read data blocks (and merge split blocks) from the cabinet
++ * and serve the read bytes to the decompressors
++ *
++ * cabd_sys_write is the internal writer function which the decompressors
++ * use. it either writes data to disk (self->d->outfh) with the real
++ * sys->write() function, or does nothing with the data when
++ * self->d->outfh == NULL. advances self->d->offset
++ */
++static int cabd_sys_read(struct mspack_file *file, void *buffer, int bytes) {
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) file;
++ unsigned char *buf = (unsigned char *) buffer;
++ struct mspack_system *sys = self->system;
++ int avail, todo, outlen, ignore_cksum;
++
++ ignore_cksum = self->param[MSCABD_PARAM_FIXMSZIP] &&
++ ((self->d->comp_type & cffoldCOMPTYPE_MASK) == cffoldCOMPTYPE_MSZIP);
++
++ todo = bytes;
++ while (todo > 0) {
++ avail = self->d->i_end - self->d->i_ptr;
++
++ /* if out of input data, read a new block */
++ if (avail) {
++ /* copy as many input bytes available as possible */
++ if (avail > todo) avail = todo;
++ sys->copy(self->d->i_ptr, buf, (size_t) avail);
++ self->d->i_ptr += avail;
++ buf += avail;
++ todo -= avail;
++ }
++ else {
++ /* out of data, read a new block */
++
++ /* check if we're out of input blocks, advance block counter */
++ if (self->d->block++ >= self->d->folder->base.num_blocks) {
++ self->read_error = MSPACK_ERR_DATAFORMAT;
++ break;
++ }
++
++ /* read a block */
++ self->read_error = cabd_sys_read_block(sys, self->d, &outlen, ignore_cksum);
++ if (self->read_error) return -1;
++
++ /* special Quantum hack -- trailer byte to allow the decompressor
++ * to realign itself. CAB Quantum blocks, unlike LZX blocks, can have
++ * anything from 0 to 4 trailing null bytes. */
++ if ((self->d->comp_type & cffoldCOMPTYPE_MASK)==cffoldCOMPTYPE_QUANTUM) {
++ *self->d->i_end++ = 0xFF;
++ }
++
++ /* is this the last block? */
++ if (self->d->block >= self->d->folder->base.num_blocks) {
++ /* last block */
++ if ((self->d->comp_type & cffoldCOMPTYPE_MASK) == cffoldCOMPTYPE_LZX) {
++ /* special LZX hack -- on the last block, inform LZX of the
++ * size of the output data stream. */
++ lzxd_set_output_length((struct lzxd_stream *) self->d->state, (off_t)
++ ((self->d->block-1) * CAB_BLOCKMAX + outlen));
++ }
++ }
++ else {
++ /* not the last block */
++ if (outlen != CAB_BLOCKMAX) {
++ self->system->message(self->d->infh,
++ "WARNING; non-maximal data block");
++ }
++ }
++ } /* if (avail) */
++ } /* while (todo > 0) */
++ return bytes - todo;
++}
++
++static int cabd_sys_write(struct mspack_file *file, void *buffer, int bytes) {
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) file;
++ self->d->offset += bytes;
++ if (self->d->outfh) {
++ return self->system->write(self->d->outfh, buffer, bytes);
++ }
++ return bytes;
++}
++
++/***************************************
++ * CABD_SYS_READ_BLOCK
++ ***************************************
++ * reads a whole data block from a cab file. the block may span more than
++ * one cab file, if it does then the fragments will be reassembled
++ */
++static int cabd_sys_read_block(struct mspack_system *sys,
++ struct mscabd_decompress_state *d,
++ int *out, int ignore_cksum)
++{
++ unsigned char hdr[cfdata_SIZEOF];
++ unsigned int cksum;
++ int len;
++
++ /* reset the input block pointer and end of block pointer */
++ d->i_ptr = d->i_end = &d->input[0];
++
++ do {
++ /* read the block header */
++ if (sys->read(d->infh, &hdr[0], cfdata_SIZEOF) != cfdata_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* skip any reserved block headers */
++ if (d->data->cab->block_resv &&
++ sys->seek(d->infh, (off_t) d->data->cab->block_resv,
++ MSPACK_SYS_SEEK_CUR))
++ {
++ return MSPACK_ERR_SEEK;
++ }
++
++ /* blocks must not be over CAB_INPUTMAX in size */
++ len = EndGetI16(&hdr[cfdata_CompressedSize]);
++ if (((d->i_end - d->i_ptr) + len) > CAB_INPUTMAX) {
++ D(("block size > CAB_INPUTMAX (%ld + %d)", d->i_end - d->i_ptr, len))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* blocks must not expand to more than CAB_BLOCKMAX */
++ if (EndGetI16(&hdr[cfdata_UncompressedSize]) > CAB_BLOCKMAX) {
++ D(("block size > CAB_BLOCKMAX"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* read the block data */
++ if (sys->read(d->infh, d->i_end, len) != len) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* perform checksum test on the block (if one is stored) */
++ if ((cksum = EndGetI32(&hdr[cfdata_CheckSum]))) {
++ unsigned int sum2 = cabd_checksum(d->i_end, (unsigned int) len, 0);
++ if (cabd_checksum(&hdr[4], 4, sum2) != cksum) {
++ if (!ignore_cksum) return MSPACK_ERR_CHECKSUM;
++ sys->message(d->infh, "WARNING; bad block checksum found");
++ }
++ }
++
++ /* advance end of block pointer to include newly read data */
++ d->i_end += len;
++
++ /* uncompressed size == 0 means this block was part of a split block
++ * and it continues as the first block of the next cabinet in the set.
++ * otherwise, this is the last part of the block, and no more block
++ * reading needs to be done.
++ */
++ /* EXIT POINT OF LOOP -- uncompressed size != 0 */
++ if ((*out = EndGetI16(&hdr[cfdata_UncompressedSize]))) {
++ return MSPACK_ERR_OK;
++ }
++
++ /* otherwise, advance to next cabinet */
++
++ /* close current file handle */
++ sys->close(d->infh);
++ d->infh = NULL;
++
++ /* advance to next member in the cabinet set */
++ if (!(d->data = d->data->next)) {
++ D(("ran out of splits in cabinet set"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* open next cab file */
++ d->incab = d->data->cab;
++ if (!(d->infh = sys->open(sys, d->incab->base.filename,
++ MSPACK_SYS_OPEN_READ)))
++ {
++ return MSPACK_ERR_OPEN;
++ }
++
++ /* seek to start of data blocks */
++ if (sys->seek(d->infh, d->data->offset, MSPACK_SYS_SEEK_START)) {
++ return MSPACK_ERR_SEEK;
++ }
++ } while (1);
++
++ /* not reached */
++ return MSPACK_ERR_OK;
++}
++
++static unsigned int cabd_checksum(unsigned char *data, unsigned int bytes,
++ unsigned int cksum)
++{
++ unsigned int len, ul = 0;
++
++ for (len = bytes >> 2; len--; data += 4) {
++ cksum ^= ((data[0]) | (data[1]<<8) | (data[2]<<16) | (data[3]<<24));
++ }
++
++ switch (bytes & 3) {
++ case 3: ul |= *data++ << 16;
++ case 2: ul |= *data++ << 8;
++ case 1: ul |= *data;
++ }
++ cksum ^= ul;
++
++ return cksum;
++}
++
++/***************************************
++ * NONED_INIT, NONED_DECOMPRESS, NONED_FREE
++ ***************************************
++ * the "not compressed" method decompressor
++ */
++struct noned_state {
++ struct mspack_system *sys;
++ struct mspack_file *i;
++ struct mspack_file *o;
++ unsigned char *buf;
++ int bufsize;
++};
++
++static struct noned_state *noned_init(struct mspack_system *sys,
++ struct mspack_file *in,
++ struct mspack_file *out,
++ int bufsize)
++{
++ struct noned_state *state = (struct noned_state *) sys->alloc(sys, sizeof(struct noned_state));
++ unsigned char *buf = (unsigned char *) sys->alloc(sys, (size_t) bufsize);
++ if (state && buf) {
++ state->sys = sys;
++ state->i = in;
++ state->o = out;
++ state->buf = buf;
++ state->bufsize = bufsize;
++ }
++ else {
++ sys->free(buf);
++ sys->free(state);
++ state = NULL;
++ }
++ return state;
++}
++
++static int noned_decompress(struct noned_state *s, off_t bytes) {
++ int run;
++ while (bytes > 0) {
++ run = (bytes > s->bufsize) ? s->bufsize : (int) bytes;
++ if (s->sys->read(s->i, &s->buf[0], run) != run) return MSPACK_ERR_READ;
++ if (s->sys->write(s->o, &s->buf[0], run) != run) return MSPACK_ERR_WRITE;
++ bytes -= run;
++ }
++ return MSPACK_ERR_OK;
++}
++
++static void noned_free(struct noned_state *state) {
++ struct mspack_system *sys;
++ if (state) {
++ sys = state->sys;
++ sys->free(state->buf);
++ sys->free(state);
++ }
++}
++
++
++/***************************************
++ * CABD_PARAM
++ ***************************************
++ * allows a parameter to be set
++ */
++static int cabd_param(struct mscab_decompressor *base, int param, int value) {
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ if (!self) return MSPACK_ERR_ARGS;
++
++ switch (param) {
++ case MSCABD_PARAM_SEARCHBUF:
++ if (value < 4) return MSPACK_ERR_ARGS;
++ self->param[MSCABD_PARAM_SEARCHBUF] = value;
++ break;
++ case MSCABD_PARAM_FIXMSZIP:
++ self->param[MSCABD_PARAM_FIXMSZIP] = value;
++ break;
++ case MSCABD_PARAM_DECOMPBUF:
++ if (value < 4) return MSPACK_ERR_ARGS;
++ self->param[MSCABD_PARAM_DECOMPBUF] = value;
++ break;
++ default:
++ return MSPACK_ERR_ARGS;
++ }
++ return MSPACK_ERR_OK;
++}
++
++/***************************************
++ * CABD_ERROR
++ ***************************************
++ * returns the last error that occurred
++ */
++static int cabd_error(struct mscab_decompressor *base) {
++ struct mscab_decompressor_p *self = (struct mscab_decompressor_p *) base;
++ return (self) ? self->error : MSPACK_ERR_ARGS;
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/chm.h b/libclamav/libmspack-0.4alpha/mspack/chm.h
+new file mode 100644
+index 000000000000..a85d2e173157
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/chm.h
+@@ -0,0 +1,122 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_CHM_H
++#define MSPACK_CHM_H 1
++
++#include <lzx.h>
++
++/* generic CHM definitions */
++
++#define chmhead_Signature (0x0000)
++#define chmhead_Version (0x0004)
++#define chmhead_HeaderLen (0x0008)
++#define chmhead_Unknown1 (0x000C)
++#define chmhead_Timestamp (0x0010)
++#define chmhead_LanguageID (0x0014)
++#define chmhead_GUID1 (0x0018)
++#define chmhead_GUID2 (0x0028)
++#define chmhead_SIZEOF (0x0038)
++
++#define chmhst_OffsetHS0 (0x0000)
++#define chmhst_LengthHS0 (0x0008)
++#define chmhst_OffsetHS1 (0x0010)
++#define chmhst_LengthHS1 (0x0018)
++#define chmhst_SIZEOF (0x0020)
++#define chmhst3_OffsetCS0 (0x0020)
++#define chmhst3_SIZEOF (0x0028)
++
++#define chmhs0_Unknown1 (0x0000)
++#define chmhs0_Unknown2 (0x0004)
++#define chmhs0_FileLen (0x0008)
++#define chmhs0_Unknown3 (0x0010)
++#define chmhs0_Unknown4 (0x0014)
++#define chmhs0_SIZEOF (0x0018)
++
++#define chmhs1_Signature (0x0000)
++#define chmhs1_Version (0x0004)
++#define chmhs1_HeaderLen (0x0008)
++#define chmhs1_Unknown1 (0x000C)
++#define chmhs1_ChunkSize (0x0010)
++#define chmhs1_Density (0x0014)
++#define chmhs1_Depth (0x0018)
++#define chmhs1_IndexRoot (0x001C)
++#define chmhs1_FirstPMGL (0x0020)
++#define chmhs1_LastPMGL (0x0024)
++#define chmhs1_Unknown2 (0x0028)
++#define chmhs1_NumChunks (0x002C)
++#define chmhs1_LanguageID (0x0030)
++#define chmhs1_GUID (0x0034)
++#define chmhs1_Unknown3 (0x0044)
++#define chmhs1_Unknown4 (0x0048)
++#define chmhs1_Unknown5 (0x004C)
++#define chmhs1_Unknown6 (0x0050)
++#define chmhs1_SIZEOF (0x0054)
++
++#define pmgl_Signature (0x0000)
++#define pmgl_QuickRefSize (0x0004)
++#define pmgl_Unknown1 (0x0008)
++#define pmgl_PrevChunk (0x000C)
++#define pmgl_NextChunk (0x0010)
++#define pmgl_Entries (0x0014)
++#define pmgl_headerSIZEOF (0x0014)
++
++#define pmgi_Signature (0x0000)
++#define pmgi_QuickRefSize (0x0004)
++#define pmgi_Entries (0x0008)
++#define pmgi_headerSIZEOF (0x000C)
++
++#define lzxcd_Length (0x0000)
++#define lzxcd_Signature (0x0004)
++#define lzxcd_Version (0x0008)
++#define lzxcd_ResetInterval (0x000C)
++#define lzxcd_WindowSize (0x0010)
++#define lzxcd_CacheSize (0x0014)
++#define lzxcd_Unknown1 (0x0018)
++#define lzxcd_SIZEOF (0x001C)
++
++#define lzxrt_Unknown1 (0x0000)
++#define lzxrt_NumEntries (0x0004)
++#define lzxrt_EntrySize (0x0008)
++#define lzxrt_TableOffset (0x000C)
++#define lzxrt_UncompLen (0x0010)
++#define lzxrt_CompLen (0x0018)
++#define lzxrt_FrameLen (0x0020)
++#define lzxrt_Entries (0x0028)
++#define lzxrt_headerSIZEOF (0x0028)
++
++/* CHM compression definitions */
++
++struct mschm_compressor_p {
++ struct mschm_compressor base;
++ struct mspack_system *system;
++ char *temp_file;
++ int use_temp_file;
++ int error;
++};
++
++/* CHM decompression definitions */
++struct mschmd_decompress_state {
++ struct mschmd_header *chm; /* CHM file being decompressed */
++ off_t offset; /* uncompressed offset within folder */
++ off_t inoffset; /* offset in input file */
++ struct lzxd_stream *state; /* LZX decompressor state */
++ struct mspack_system sys; /* special I/O code for decompressor */
++ struct mspack_file *infh; /* input file handle */
++ struct mspack_file *outfh; /* output file handle */
++};
++
++struct mschm_decompressor_p {
++ struct mschm_decompressor base;
++ struct mspack_system *system;
++ struct mschmd_decompress_state *d;
++ int error;
++};
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/chmc.c b/libclamav/libmspack-0.4alpha/mspack/chmc.c
+new file mode 100644
+index 000000000000..72f6c5b389e4
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/chmc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* CHM compression implementation */
++
++#include <system.h>
++#include <chm.h>
++
++struct mschm_compressor *
++ mspack_create_chm_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_chm_compressor(struct mschm_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/chmd.c b/libclamav/libmspack-0.4alpha/mspack/chmd.c
+new file mode 100644
+index 000000000000..19dc47b56ec0
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/chmd.c
+@@ -0,0 +1,1392 @@
++/* This file is part of libmspack.
++ * (C) 2003-2011 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* CHM decompression implementation */
++
++#include <system.h>
++#include <chm.h>
++
++/* prototypes */
++static struct mschmd_header * chmd_open(
++ struct mschm_decompressor *base, const char *filename);
++static struct mschmd_header * chmd_fast_open(
++ struct mschm_decompressor *base, const char *filename);
++static struct mschmd_header *chmd_real_open(
++ struct mschm_decompressor *base, const char *filename, int entire);
++static void chmd_close(
++ struct mschm_decompressor *base, struct mschmd_header *chm);
++static int chmd_read_headers(
++ struct mspack_system *sys, struct mspack_file *fh,
++ struct mschmd_header *chm, int entire);
++static int chmd_fast_find(
++ struct mschm_decompressor *base, struct mschmd_header *chm,
++ const char *filename, struct mschmd_file *f_ptr, int f_size);
++static unsigned char *read_chunk(
++ struct mschm_decompressor_p *self, struct mschmd_header *chm,
++ struct mspack_file *fh, unsigned int chunk);
++static int search_chunk(
++ struct mschmd_header *chm, const unsigned char *chunk, const char *filename,
++ const unsigned char **result, const unsigned char **result_end);
++static inline int compare(
++ const char *s1, const char *s2, int l1, int l2);
++static int chmd_extract(
++ struct mschm_decompressor *base, struct mschmd_file *file,
++ const char *filename);
++static int chmd_sys_write(
++ struct mspack_file *file, void *buffer, int bytes);
++static int chmd_init_decomp(
++ struct mschm_decompressor_p *self, struct mschmd_file *file);
++static int read_reset_table(
++ struct mschm_decompressor_p *self, struct mschmd_sec_mscompressed *sec,
++ int entry, off_t *length_ptr, off_t *offset_ptr);
++static int read_spaninfo(
++ struct mschm_decompressor_p *self, struct mschmd_sec_mscompressed *sec,
++ off_t *length_ptr);
++static int find_sys_file(
++ struct mschm_decompressor_p *self, struct mschmd_sec_mscompressed *sec,
++ struct mschmd_file **f_ptr, const char *name);
++static unsigned char *read_sys_file(
++ struct mschm_decompressor_p *self, struct mschmd_file *file);
++static int chmd_error(
++ struct mschm_decompressor *base);
++static int read_off64(
++ off_t *var, unsigned char *mem, struct mspack_system *sys,
++ struct mspack_file *fh);
++
++/* filenames of the system files used for decompression.
++ * Content and ControlData are essential.
++ * ResetTable is preferred, but SpanInfo can be used if not available
++ */
++static const char *content_name = "::DataSpace/Storage/MSCompressed/Content";
++static const char *control_name = "::DataSpace/Storage/MSCompressed/ControlData";
++static const char *spaninfo_name = "::DataSpace/Storage/MSCompressed/SpanInfo";
++static const char *rtable_name = "::DataSpace/Storage/MSCompressed/Transform/"
++ "{7FC28940-9D31-11D0-9B27-00A0C91E9C7C}/InstanceData/ResetTable";
++
++/***************************************
++ * MSPACK_CREATE_CHM_DECOMPRESSOR
++ ***************************************
++ * constructor
++ */
++struct mschm_decompressor *
++ mspack_create_chm_decompressor(struct mspack_system *sys)
++{
++ struct mschm_decompressor_p *self = NULL;
++
++ if (!sys) sys = mspack_default_system;
++ if (!mspack_valid_system(sys)) return NULL;
++
++ if ((self = (struct mschm_decompressor_p *) sys->alloc(sys, sizeof(struct mschm_decompressor_p)))) {
++ self->base.open = &chmd_open;
++ self->base.close = &chmd_close;
++ self->base.extract = &chmd_extract;
++ self->base.last_error = &chmd_error;
++ self->base.fast_open = &chmd_fast_open;
++ self->base.fast_find = &chmd_fast_find;
++ self->system = sys;
++ self->error = MSPACK_ERR_OK;
++ self->d = NULL;
++ }
++ return (struct mschm_decompressor *) self;
++}
++
++/***************************************
++ * MSPACK_DESTROY_CAB_DECOMPRESSOR
++ ***************************************
++ * destructor
++ */
++void mspack_destroy_chm_decompressor(struct mschm_decompressor *base) {
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) base;
++ if (self) {
++ struct mspack_system *sys = self->system;
++ if (self->d) {
++ if (self->d->infh) sys->close(self->d->infh);
++ if (self->d->state) lzxd_free(self->d->state);
++ sys->free(self->d);
++ }
++ sys->free(self);
++ }
++}
++
++/***************************************
++ * CHMD_OPEN
++ ***************************************
++ * opens a file and tries to read it as a CHM file.
++ * Calls chmd_real_open() with entire=1.
++ */
++static struct mschmd_header *chmd_open(struct mschm_decompressor *base,
++ const char *filename)
++{
++ return chmd_real_open(base, filename, 1);
++}
++
++/***************************************
++ * CHMD_FAST_OPEN
++ ***************************************
++ * opens a file and tries to read it as a CHM file, but does not read
++ * the file headers. Calls chmd_real_open() with entire=0
++ */
++static struct mschmd_header *chmd_fast_open(struct mschm_decompressor *base,
++ const char *filename)
++{
++ return chmd_real_open(base, filename, 0);
++}
++
++/***************************************
++ * CHMD_REAL_OPEN
++ ***************************************
++ * the real implementation of chmd_open() and chmd_fast_open(). It simply
++ * passes the "entire" parameter to chmd_read_headers(), which will then
++ * either read all headers, or a bare mininum.
++ */
++static struct mschmd_header *chmd_real_open(struct mschm_decompressor *base,
++ const char *filename, int entire)
++{
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) base;
++ struct mschmd_header *chm = NULL;
++ struct mspack_system *sys;
++ struct mspack_file *fh;
++ int error;
++
++ if (!base) return NULL;
++ sys = self->system;
++
++ if ((fh = sys->open(sys, filename, MSPACK_SYS_OPEN_READ))) {
++ if ((chm = (struct mschmd_header *) sys->alloc(sys, sizeof(struct mschmd_header)))) {
++ chm->filename = filename;
++ error = chmd_read_headers(sys, fh, chm, entire);
++ if (error) {
++ /* if the error is DATAFORMAT, and there are some results, return
++ * partial results with a warning, rather than nothing */
++ if (error == MSPACK_ERR_DATAFORMAT && (chm->files || chm->sysfiles)) {
++ sys->message(fh, "WARNING; contents are corrupt");
++ error = MSPACK_ERR_OK;
++ }
++ else {
++ chmd_close(base, chm);
++ chm = NULL;
++ }
++ }
++ self->error = error;
++ }
++ else {
++ self->error = MSPACK_ERR_NOMEMORY;
++ }
++ sys->close(fh);
++ }
++ else {
++ self->error = MSPACK_ERR_OPEN;
++ }
++ return chm;
++}
++
++/***************************************
++ * CHMD_CLOSE
++ ***************************************
++ * frees all memory associated with a given mschmd_header
++ */
++static void chmd_close(struct mschm_decompressor *base,
++ struct mschmd_header *chm)
++{
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) base;
++ struct mschmd_file *fi, *nfi;
++ struct mspack_system *sys;
++ unsigned int i;
++
++ if (!base) return;
++ sys = self->system;
++
++ self->error = MSPACK_ERR_OK;
++
++ /* free files */
++ for (fi = chm->files; fi; fi = nfi) {
++ nfi = fi->next;
++ sys->free(fi);
++ }
++ for (fi = chm->sysfiles; fi; fi = nfi) {
++ nfi = fi->next;
++ sys->free(fi);
++ }
++
++ /* if this CHM was being decompressed, free decompression state */
++ if (self->d && (self->d->chm == chm)) {
++ if (self->d->infh) sys->close(self->d->infh);
++ if (self->d->state) lzxd_free(self->d->state);
++ sys->free(self->d);
++ self->d = NULL;
++ }
++
++ /* if this CHM had a chunk cache, free it and contents */
++ if (chm->chunk_cache) {
++ for (i = 0; i < chm->num_chunks; i++) sys->free(chm->chunk_cache[i]);
++ sys->free(chm->chunk_cache);
++ }
++
++ sys->free(chm);
++}
++
++/***************************************
++ * CHMD_READ_HEADERS
++ ***************************************
++ * reads the basic CHM file headers. If the "entire" parameter is
++ * non-zero, all file entries will also be read. fills out a pre-existing
++ * mschmd_header structure, allocates memory for files as necessary
++ */
++
++/* The GUIDs found in CHM headers */
++static const unsigned char guids[32] = {
++ /* {7C01FD10-7BAA-11D0-9E0C-00A0-C922-E6EC} */
++ 0x10, 0xFD, 0x01, 0x7C, 0xAA, 0x7B, 0xD0, 0x11,
++ 0x9E, 0x0C, 0x00, 0xA0, 0xC9, 0x22, 0xE6, 0xEC,
++ /* {7C01FD11-7BAA-11D0-9E0C-00A0-C922-E6EC} */
++ 0x11, 0xFD, 0x01, 0x7C, 0xAA, 0x7B, 0xD0, 0x11,
++ 0x9E, 0x0C, 0x00, 0xA0, 0xC9, 0x22, 0xE6, 0xEC
++};
++
++/* reads an encoded integer into a variable; 7 bits of data per byte,
++ * the high bit is used to indicate that there is another byte */
++#define READ_ENCINT(var) do { \
++ (var) = 0; \
++ do { \
++ if (p > end) goto chunk_end; \
++ (var) = ((var) << 7) | (*p & 0x7F); \
++ } while (*p++ & 0x80); \
++} while (0)
++
++static int chmd_read_headers(struct mspack_system *sys, struct mspack_file *fh,
++ struct mschmd_header *chm, int entire)
++{
++ unsigned int section, name_len, x, errors, num_chunks;
++ unsigned char buf[0x54], *chunk = NULL, *name, *p, *end;
++ struct mschmd_file *fi, *link = NULL;
++ off_t offset, length;
++ int num_entries, i;
++
++ /* initialise pointers */
++ chm->files = NULL;
++ chm->sysfiles = NULL;
++ chm->chunk_cache = NULL;
++ chm->sec0.base.chm = chm;
++ chm->sec0.base.id = 0;
++ chm->sec1.base.chm = chm;
++ chm->sec1.base.id = 1;
++ chm->sec1.content = NULL;
++ chm->sec1.control = NULL;
++ chm->sec1.spaninfo = NULL;
++ chm->sec1.rtable = NULL;
++
++ /* read the first header */
++ if (sys->read(fh, &buf[0], chmhead_SIZEOF) != chmhead_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* check ITSF signature */
++ if (EndGetI32(&buf[chmhead_Signature]) != 0x46535449) {
++ return MSPACK_ERR_SIGNATURE;
++ }
++
++ /* check both header GUIDs */
++ if (mspack_memcmp(&buf[chmhead_GUID1], &guids[0], 32L) != 0) {
++ D(("incorrect GUIDs"))
++ return MSPACK_ERR_SIGNATURE;
++ }
++
++ chm->version = EndGetI32(&buf[chmhead_Version]);
++ chm->timestamp = EndGetM32(&buf[chmhead_Timestamp]);
++ chm->language = EndGetI32(&buf[chmhead_LanguageID]);
++ if (chm->version > 3) {
++ sys->message(fh, "WARNING; CHM version > 3");
++ }
++
++ /* read the header section table */
++ if (sys->read(fh, &buf[0], chmhst3_SIZEOF) != chmhst3_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* chmhst3_OffsetCS0 does not exist in version 1 or 2 CHM files.
++ * The offset will be corrected later, once HS1 is read.
++ */
++ if (read_off64(&offset, &buf[chmhst_OffsetHS0], sys, fh) ||
++ read_off64(&chm->dir_offset, &buf[chmhst_OffsetHS1], sys, fh) ||
++ read_off64(&chm->sec0.offset, &buf[chmhst3_OffsetCS0], sys, fh))
++ {
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* seek to header section 0 */
++ if (sys->seek(fh, offset, MSPACK_SYS_SEEK_START)) {
++ return MSPACK_ERR_SEEK;
++ }
++
++ /* read header section 0 */
++ if (sys->read(fh, &buf[0], chmhs0_SIZEOF) != chmhs0_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++ if (read_off64(&chm->length, &buf[chmhs0_FileLen], sys, fh)) {
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* seek to header section 1 */
++ if (sys->seek(fh, chm->dir_offset, MSPACK_SYS_SEEK_START)) {
++ return MSPACK_ERR_SEEK;
++ }
++
++ /* read header section 1 */
++ if (sys->read(fh, &buf[0], chmhs1_SIZEOF) != chmhs1_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ chm->dir_offset = sys->tell(fh);
++ chm->chunk_size = EndGetI32(&buf[chmhs1_ChunkSize]);
++ chm->density = EndGetI32(&buf[chmhs1_Density]);
++ chm->depth = EndGetI32(&buf[chmhs1_Depth]);
++ chm->index_root = EndGetI32(&buf[chmhs1_IndexRoot]);
++ chm->num_chunks = EndGetI32(&buf[chmhs1_NumChunks]);
++ chm->first_pmgl = EndGetI32(&buf[chmhs1_FirstPMGL]);
++ chm->last_pmgl = EndGetI32(&buf[chmhs1_LastPMGL]);
++
++ if (chm->version < 3) {
++ /* versions before 3 don't have chmhst3_OffsetCS0 */
++ chm->sec0.offset = chm->dir_offset + (chm->chunk_size * chm->num_chunks);
++ }
++
++ /* check if content offset or file size is wrong */
++ if (chm->sec0.offset > chm->length) {
++ D(("content section begins after file has ended"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* ensure there are chunks and that chunk size is
++ * large enough for signature and num_entries */
++ if (chm->chunk_size < (pmgl_Entries + 2)) {
++ D(("chunk size not large enough"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++ if (chm->num_chunks == 0) {
++ D(("no chunks"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* The chunk_cache data structure is not great; large values for num_chunks
++ * or num_chunks*chunk_size can exhaust all memory. Until a better chunk
++ * cache is implemented, put arbitrary limits on num_chunks and chunk size.
++ */
++ if (chm->num_chunks > 100000) {
++ D(("more than 100,000 chunks"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++ if ((off_t)chm->chunk_size * (off_t)chm->num_chunks > chm->length) {
++ D(("chunks larger than entire file"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* common sense checks on header section 1 fields */
++ if ((chm->chunk_size & (chm->chunk_size - 1)) != 0) {
++ sys->message(fh, "WARNING; chunk size is not a power of two");
++ }
++ if (chm->first_pmgl != 0) {
++ sys->message(fh, "WARNING; first PMGL chunk is not zero");
++ }
++ if (chm->first_pmgl > chm->last_pmgl) {
++ D(("first pmgl chunk is after last pmgl chunk"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++ if (chm->index_root != 0xFFFFFFFF && chm->index_root > chm->num_chunks) {
++ D(("index_root outside valid range"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* if we are doing a quick read, stop here! */
++ if (!entire) {
++ return MSPACK_ERR_OK;
++ }
++
++ /* seek to the first PMGL chunk, and reduce the number of chunks to read */
++ if ((x = chm->first_pmgl) != 0) {
++ if (sys->seek(fh,(off_t) (x * chm->chunk_size), MSPACK_SYS_SEEK_CUR)) {
++ return MSPACK_ERR_SEEK;
++ }
++ }
++ num_chunks = chm->last_pmgl - x + 1;
++
++ if (!(chunk = (unsigned char *) sys->alloc(sys, (size_t)chm->chunk_size))) {
++ return MSPACK_ERR_NOMEMORY;
++ }
++
++ /* read and process all chunks from FirstPMGL to LastPMGL */
++ errors = 0;
++ while (num_chunks--) {
++ /* read next chunk */
++ if (sys->read(fh, chunk, (int)chm->chunk_size) != (int)chm->chunk_size) {
++ sys->free(chunk);
++ return MSPACK_ERR_READ;
++ }
++
++ /* process only directory (PMGL) chunks */
++ if (EndGetI32(&chunk[pmgl_Signature]) != 0x4C474D50) continue;
++
++ if (EndGetI32(&chunk[pmgl_QuickRefSize]) < 2) {
++ sys->message(fh, "WARNING; PMGL quickref area is too small");
++ }
++ if (EndGetI32(&chunk[pmgl_QuickRefSize]) >
++ ((int)chm->chunk_size - pmgl_Entries))
++ {
++ sys->message(fh, "WARNING; PMGL quickref area is too large");
++ }
++
++ p = &chunk[pmgl_Entries];
++ end = &chunk[chm->chunk_size - 2];
++ num_entries = EndGetI16(end);
++
++ while (num_entries--) {
++ READ_ENCINT(name_len); name = p; p += name_len;
++ READ_ENCINT(section);
++ READ_ENCINT(offset);
++ READ_ENCINT(length);
++
++ /* empty files and directory names are stored as a file entry at
++ * offset 0 with length 0. We want to keep empty files, but not
++ * directory names, which end with a "/" */
++ if ((offset == 0) && (length == 0)) {
++ if ((name_len > 0) && (name[name_len-1] == '/')) continue;
++ }
++
++ if (section > 1) {
++ sys->message(fh, "invalid section number '%u'.", section);
++ continue;
++ }
++
++ if (!(fi = (struct mschmd_file *) sys->alloc(sys, sizeof(struct mschmd_file) + name_len + 1))) {
++ sys->free(chunk);
++ return MSPACK_ERR_NOMEMORY;
++ }
++
++ fi->next = NULL;
++ fi->filename = (char *) &fi[1];
++ fi->section = ((section == 0) ? (struct mschmd_section *) (&chm->sec0)
++ : (struct mschmd_section *) (&chm->sec1));
++ fi->offset = offset;
++ fi->length = length;
++ sys->copy(name, fi->filename, (size_t) name_len);
++ fi->filename[name_len] = '\0';
++
++ if (name[0] == ':' && name[1] == ':') {
++ /* system file */
++ if (mspack_memcmp(&name[2], &content_name[2], 31L) == 0) {
++ if (mspack_memcmp(&name[33], &content_name[33], 8L) == 0) {
++ chm->sec1.content = fi;
++ }
++ else if (mspack_memcmp(&name[33], &control_name[33], 11L) == 0) {
++ chm->sec1.control = fi;
++ }
++ else if (mspack_memcmp(&name[33], &spaninfo_name[33], 8L) == 0) {
++ chm->sec1.spaninfo = fi;
++ }
++ else if (mspack_memcmp(&name[33], &rtable_name[33], 72L) == 0) {
++ chm->sec1.rtable = fi;
++ }
++ }
++ fi->next = chm->sysfiles;
++ chm->sysfiles = fi;
++ }
++ else {
++ /* normal file */
++ if (link) link->next = fi; else chm->files = fi;
++ link = fi;
++ }
++ }
++
++ /* this is reached either when num_entries runs out, or if
++ * reading data from the chunk reached a premature end of chunk */
++ chunk_end:
++ if (num_entries >= 0) {
++ D(("chunk ended before all entries could be read"))
++ errors++;
++ }
++
++ }
++ sys->free(chunk);
++ return (errors > 0) ? MSPACK_ERR_DATAFORMAT : MSPACK_ERR_OK;
++}
++
++/***************************************
++ * CHMD_FAST_FIND
++ ***************************************
++ * uses PMGI index chunks and quickref data to quickly locate a file
++ * directly from the on-disk index.
++ *
++ * TODO: protect against infinite loops in chunks (where pgml_NextChunk
++ * or a PGMI index entry point to an already visited chunk)
++ */
++static int chmd_fast_find(struct mschm_decompressor *base,
++ struct mschmd_header *chm, const char *filename,
++ struct mschmd_file *f_ptr, int f_size)
++{
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) base;
++ struct mspack_system *sys;
++ struct mspack_file *fh;
++ const unsigned char *chunk, *p, *end;
++ int err = MSPACK_ERR_OK, result = -1;
++ unsigned int n, sec;
++
++ if (!self || !chm || !f_ptr || (f_size != sizeof(struct mschmd_file))) {
++ return MSPACK_ERR_ARGS;
++ }
++ sys = self->system;
++
++ /* clear the results structure */
++ memset(f_ptr, 0, f_size);
++
++ if (!(fh = sys->open(sys, chm->filename, MSPACK_SYS_OPEN_READ))) {
++ return MSPACK_ERR_OPEN;
++ }
++
++ /* go through PMGI chunk hierarchy to reach PMGL chunk */
++ if (chm->index_root < chm->num_chunks) {
++ n = chm->index_root;
++ for (;;) {
++ if (!(chunk = read_chunk(self, chm, fh, n))) {
++ sys->close(fh);
++ return self->error;
++ }
++
++ /* search PMGI/PMGL chunk. exit early if no entry found */
++ if ((result = search_chunk(chm, chunk, filename, &p, &end)) <= 0) {
++ break;
++ }
++
++ /* found result. loop around for next chunk if this is PMGI */
++ if (chunk[3] == 0x4C) break; else READ_ENCINT(n);
++ }
++ }
++ else {
++ /* PMGL chunks only, search from first_pmgl to last_pmgl */
++ for (n = chm->first_pmgl; n <= chm->last_pmgl;
++ n = EndGetI32(&chunk[pmgl_NextChunk]))
++ {
++ if (!(chunk = read_chunk(self, chm, fh, n))) {
++ err = self->error;
++ break;
++ }
++
++ /* search PMGL chunk. exit if file found */
++ if ((result = search_chunk(chm, chunk, filename, &p, &end)) > 0) {
++ break;
++ }
++
++ /* stop simple infinite loops: can't visit the same chunk twice */
++ if ((int)n == EndGetI32(&chunk[pmgl_NextChunk])) {
++ break;
++ }
++ }
++ }
++
++ /* if we found a file, read it */
++ if (result > 0) {
++ READ_ENCINT(sec);
++ f_ptr->section = (sec == 0) ? (struct mschmd_section *) &chm->sec0
++ : (struct mschmd_section *) &chm->sec1;
++ READ_ENCINT(f_ptr->offset);
++ READ_ENCINT(f_ptr->length);
++ }
++ else if (result < 0) {
++ err = MSPACK_ERR_DATAFORMAT;
++ }
++
++ sys->close(fh);
++ return self->error = err;
++
++ chunk_end:
++ D(("read beyond end of chunk entries"))
++ sys->close(fh);
++ return self->error = MSPACK_ERR_DATAFORMAT;
++}
++
++/* reads the given chunk into memory, storing it in a chunk cache
++ * so it doesn't need to be read from disk more than once
++ */
++static unsigned char *read_chunk(struct mschm_decompressor_p *self,
++ struct mschmd_header *chm,
++ struct mspack_file *fh,
++ unsigned int chunk_num)
++{
++ struct mspack_system *sys = self->system;
++ unsigned char *buf;
++
++ /* check arguments - most are already checked by chmd_fast_find */
++ if (chunk_num > chm->num_chunks) return NULL;
++
++ /* ensure chunk cache is available */
++ if (!chm->chunk_cache) {
++ size_t size = sizeof(unsigned char *) * chm->num_chunks;
++ if (!(chm->chunk_cache = (unsigned char **) sys->alloc(sys, size))) {
++ self->error = MSPACK_ERR_NOMEMORY;
++ return NULL;
++ }
++ memset(chm->chunk_cache, 0, size);
++ }
++
++ /* try to answer out of chunk cache */
++ if (chm->chunk_cache[chunk_num]) return chm->chunk_cache[chunk_num];
++
++ /* need to read chunk - allocate memory for it */
++ if (!(buf = (unsigned char *) sys->alloc(sys, chm->chunk_size))) {
++ self->error = MSPACK_ERR_NOMEMORY;
++ return NULL;
++ }
++
++ /* seek to block and read it */
++ if (sys->seek(fh, (off_t) (chm->dir_offset + (chunk_num * chm->chunk_size)),
++ MSPACK_SYS_SEEK_START))
++ {
++ self->error = MSPACK_ERR_SEEK;
++ sys->free(buf);
++ return NULL;
++ }
++ if (sys->read(fh, buf, (int)chm->chunk_size) != (int)chm->chunk_size) {
++ self->error = MSPACK_ERR_READ;
++ sys->free(buf);
++ return NULL;
++ }
++
++ /* check the signature. Is is PMGL or PMGI? */
++ if (!((buf[0] == 0x50) && (buf[1] == 0x4D) && (buf[2] == 0x47) &&
++ ((buf[3] == 0x4C) || (buf[3] == 0x49))))
++ {
++ self->error = MSPACK_ERR_SEEK;
++ sys->free(buf);
++ return NULL;
++ }
++
++ /* all OK. Store chunk in cache and return it */
++ return chm->chunk_cache[chunk_num] = buf;
++}
++
++/* searches a PMGI/PMGL chunk for a given filename entry. Returns -1 on
++ * data format error, 0 if entry definitely not found, 1 if entry
++ * found. In the latter case, *result and *result_end are set pointing
++ * to that entry's data (either the "next chunk" ENCINT for a PMGI or
++ * the section, offset and length ENCINTs for a PMGL).
++ *
++ * In the case of PMGL chunks, the entry has definitely been
++ * found. In the case of PMGI chunks, the entry which points to the
++ * chunk that may eventually contain that entry has been found.
++ */
++static int search_chunk(struct mschmd_header *chm,
++ const unsigned char *chunk,
++ const char *filename,
++ const unsigned char **result,
++ const unsigned char **result_end)
++{
++ const unsigned char *start, *end, *p;
++ unsigned int qr_size, num_entries, qr_entries, qr_density, name_len;
++ unsigned int L, R, M, sec, fname_len, entries_off, is_pmgl;
++ int cmp;
++
++ fname_len = strlen(filename);
++
++ /* PMGL chunk or PMGI chunk? (note: read_chunk() has already
++ * checked the rest of the characters in the chunk signature) */
++ if (chunk[3] == 0x4C) {
++ is_pmgl = 1;
++ entries_off = pmgl_Entries;
++ }
++ else {
++ is_pmgl = 0;
++ entries_off = pmgi_Entries;
++ }
++
++ /* Step 1: binary search first filename of each QR entry
++ * - target filename == entry
++ * found file
++ * - target filename < all entries
++ * file not found
++ * - target filename > all entries
++ * proceed to step 2 using final entry
++ * - target filename between two searched entries
++ * proceed to step 2
++ */
++ qr_size = EndGetI32(&chunk[pmgl_QuickRefSize]);
++ start = &chunk[chm->chunk_size - 2];
++ end = &chunk[chm->chunk_size - qr_size];
++ num_entries = EndGetI16(start);
++ qr_density = 1 + (1 << chm->density);
++ qr_entries = (num_entries + qr_density-1) / qr_density;
++
++ if (num_entries == 0) {
++ D(("chunk has no entries"))
++ return -1;
++ }
++
++ if (qr_size > chm->chunk_size) {
++ D(("quickref size > chunk size"))
++ return -1;
++ }
++
++ *result_end = end;
++
++ if (((int)qr_entries * 2) > (start - end)) {
++ D(("WARNING; more quickrefs than quickref space"))
++ qr_entries = 0; /* but we can live with it */
++ }
++
++ if (qr_entries > 0) {
++ L = 0;
++ R = qr_entries - 1;
++ do {
++ /* pick new midpoint */
++ M = (L + R) >> 1;
++
++ /* compare filename with entry QR points to */
++ p = &chunk[entries_off + (M ? EndGetI16(start - (M << 1)) : 0)];
++ READ_ENCINT(name_len);
++ if (p + name_len > end) goto chunk_end;
++ cmp = compare(filename, (char *)p, fname_len, name_len);
++
++ if (cmp == 0) break;
++ else if (cmp < 0) { if (M) R = M - 1; else return 0; }
++ else if (cmp > 0) L = M + 1;
++ } while (L <= R);
++ M = (L + R) >> 1;
++
++ if (cmp == 0) {
++ /* exact match! */
++ p += name_len;
++ *result = p;
++ return 1;
++ }
++
++ /* otherwise, read the group of entries for QR entry M */
++ p = &chunk[entries_off + (M ? EndGetI16(start - (M << 1)) : 0)];
++ num_entries -= (M * qr_density);
++ if (num_entries > qr_density) num_entries = qr_density;
++ }
++ else {
++ p = &chunk[entries_off];
++ }
++
++ /* Step 2: linear search through the set of entries reached in step 1.
++ * - filename == any entry
++ * found entry
++ * - filename < all entries (PMGI) or any entry (PMGL)
++ * entry not found, stop now
++ * - filename > all entries
++ * entry not found (PMGL) / maybe found (PMGI)
++ * -
++ */
++ *result = NULL;
++ while (num_entries-- > 0) {
++ READ_ENCINT(name_len);
++ if (p + name_len > end) goto chunk_end;
++ cmp = compare(filename, (char *)p, fname_len, name_len);
++ p += name_len;
++
++ if (cmp == 0) {
++ /* entry found */
++ *result = p;
++ return 1;
++ }
++
++ if (cmp < 0) {
++ /* entry not found (PMGL) / maybe found (PMGI) */
++ break;
++ }
++
++ /* read and ignore the rest of this entry */
++ if (is_pmgl) {
++ READ_ENCINT(R); /* skip section */
++ READ_ENCINT(R); /* skip offset */
++ READ_ENCINT(R); /* skip length */
++ }
++ else {
++ *result = p; /* store potential final result */
++ READ_ENCINT(R); /* skip chunk number */
++ }
++ }
++
++ /* PMGL? not found. PMGI? maybe found */
++ return (is_pmgl) ? 0 : (*result ? 1 : 0);
++
++ chunk_end:
++ D(("reached end of chunk data while searching"))
++ return -1;
++}
++
++#if HAVE_TOWLOWER
++# if HAVE_WCTYPE_H
++# include <wctype.h>
++# endif
++# define TOLOWER(x) towlower(x)
++#elif HAVE_TOLOWER
++# if HAVE_CTYPE_H
++# include <ctype.h>
++# endif
++# define TOLOWER(x) tolower(x)
++#else
++# define TOLOWER(x) (((x)<0||(x)>256)?(x):mspack_tolower_map[(x)])
++/* Map of char -> lowercase char for the first 256 chars. Generated with:
++ * LC_CTYPE=en_GB.utf-8 perl -Mlocale -le 'print map{ord(lc chr).","} 0..255'
++ */
++static const unsigned char mspack_tolower_map[256] = {
++ 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,
++ 28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,
++ 53,54,55,56,57,58,59,60,61,62,63,64,97,98,99,100,101,102,103,104,105,106,
++ 107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,91,92,93,94,
++ 95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,
++ 115,116,117,118,119,120,121,122,123,124,125,126,127,128,129,130,131,132,133,
++ 134,135,136,137,138,139,140,141,142,143,144,145,146,147,148,149,150,151,152,
++ 153,154,155,156,157,158,159,160,161,162,163,164,165,166,167,168,169,170,171,
++ 172,173,174,175,176,177,178,179,180,181,182,183,184,185,186,187,188,189,190,
++ 191,224,225,226,227,228,229,230,231,232,233,234,235,236,237,238,239,240,241,
++ 242,243,244,245,246,215,248,249,250,251,252,253,254,223,224,225,226,227,228,
++ 229,230,231,232,233,234,235,236,237,238,239,240,241,242,243,244,245,246,247,
++ 248,249,250,251,252,253,254,255
++};
++#endif
++
++/* decodes a UTF-8 character from s[] into c. Will not read past e. */
++#define GET_UTF8_CHAR(s, e, c) do { \
++ unsigned char x = *s++; \
++ if (x < 0x80) c = x; \
++ else if (x < 0xC0) c = -1; \
++ else if (x < 0xE0) { \
++ c = (s >= e) ? -1 : ((x & 0x1F) << 6) | (*s++ & 0x3F); \
++ } \
++ else if (x < 0xF0) { \
++ c = (s+2 > e) ? -1 : ((x & 0x0F) << 12) | ((s[0] & 0x3F) << 6) \
++ | (s[1] & 0x3F); \
++ s += 2; \
++ } \
++ else if (x < 0xF8) { \
++ c = (s+3 > e) ? -1 : ((x & 0x07) << 18) | ((s[0] & 0x3F) << 12) \
++ | ((s[1] & 0x3F) << 6) | (s[2] & 0x3F); \
++ s += 3; \
++ } \
++ else if (x < 0xFC) { \
++ c = (s+4 > e) ? -1 : ((x & 0x03) << 24) | ((s[0] & 0x3F) << 18) \
++ | ((s[1] & 0x3F) << 12)|((s[2] & 0x3F) << 6)|(s[3] & 0x3F); \
++ s += 4; \
++ } \
++ else if (x < 0xFE) { \
++ c = (s+5>e)?-1:((x&1)<<30)|((s[0]&0x3F)<<24)|((s[1]&0x3F)<<18)| \
++ ((s[2] & 0x3F) << 12) | ((s[3] & 0x3F) << 6)|(s[4] & 0x3F); \
++ s += 5; \
++ } \
++ else c = -1; \
++} while (0)
++
++/* case-insensitively compares two UTF8 encoded strings. String length for
++ * both strings must be provided, null bytes are not terminators */
++static inline int compare(const char *s1, const char *s2, int l1, int l2) {
++ register const unsigned char *p1 = (const unsigned char *) s1;
++ register const unsigned char *p2 = (const unsigned char *) s2;
++ register const unsigned char *e1 = p1 + l1, *e2 = p2 + l2;
++ int c1, c2;
++
++ while (p1 < e1 && p2 < e2) {
++ GET_UTF8_CHAR(p1, e1, c1);
++ GET_UTF8_CHAR(p2, e2, c2);
++ if (c1 == c2) continue;
++ c1 = TOLOWER(c1);
++ c2 = TOLOWER(c2);
++ if (c1 != c2) return c1 - c2;
++ }
++ return l1 - l2;
++}
++
++
++/***************************************
++ * CHMD_EXTRACT
++ ***************************************
++ * extracts a file from a CHM helpfile
++ */
++static int chmd_extract(struct mschm_decompressor *base,
++ struct mschmd_file *file, const char *filename)
++{
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) base;
++ struct mspack_system *sys;
++ struct mschmd_header *chm;
++ struct mspack_file *fh;
++ off_t bytes;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ if (!file || !file->section) return self->error = MSPACK_ERR_ARGS;
++ sys = self->system;
++ chm = file->section->chm;
++
++ /* create decompression state if it doesn't exist */
++ if (!self->d) {
++ self->d = (struct mschmd_decompress_state *) sys->alloc(sys, sizeof(struct mschmd_decompress_state));
++ if (!self->d) return self->error = MSPACK_ERR_NOMEMORY;
++ self->d->chm = chm;
++ self->d->offset = 0;
++ self->d->state = NULL;
++ self->d->sys = *sys;
++ self->d->sys.write = &chmd_sys_write;
++ self->d->infh = NULL;
++ self->d->outfh = NULL;
++ }
++
++ /* open input chm file if not open, or the open one is a different chm */
++ if (!self->d->infh || (self->d->chm != chm)) {
++ if (self->d->infh) sys->close(self->d->infh);
++ if (self->d->state) lzxd_free(self->d->state);
++ self->d->chm = chm;
++ self->d->offset = 0;
++ self->d->state = NULL;
++ self->d->infh = sys->open(sys, chm->filename, MSPACK_SYS_OPEN_READ);
++ if (!self->d->infh) return self->error = MSPACK_ERR_OPEN;
++ }
++
++ /* open file for output */
++ if (!(fh = sys->open(sys, filename, MSPACK_SYS_OPEN_WRITE))) {
++ return self->error = MSPACK_ERR_OPEN;
++ }
++
++ /* if file is empty, simply creating it is enough */
++ if (!file->length) {
++ sys->close(fh);
++ return self->error = MSPACK_ERR_OK;
++ }
++
++ self->error = MSPACK_ERR_OK;
++
++ switch (file->section->id) {
++ case 0: /* Uncompressed section file */
++ /* simple seek + copy */
++ if (sys->seek(self->d->infh, file->section->chm->sec0.offset
++ + file->offset, MSPACK_SYS_SEEK_START))
++ {
++ self->error = MSPACK_ERR_SEEK;
++ }
++ else {
++ unsigned char buf[512];
++ off_t length = file->length;
++ while (length > 0) {
++ int run = sizeof(buf);
++ if ((off_t)run > length) run = (int)length;
++ if (sys->read(self->d->infh, &buf[0], run) != run) {
++ self->error = MSPACK_ERR_READ;
++ break;
++ }
++ if (sys->write(fh, &buf[0], run) != run) {
++ self->error = MSPACK_ERR_WRITE;
++ break;
++ }
++ length -= run;
++ }
++ }
++ break;
++
++ case 1: /* MSCompressed section file */
++ /* (re)initialise compression state if we it is not yet initialised,
++ * or we have advanced too far and have to backtrack
++ */
++ if (!self->d->state || (file->offset < self->d->offset)) {
++ if (self->d->state) {
++ lzxd_free(self->d->state);
++ self->d->state = NULL;
++ }
++ if (chmd_init_decomp(self, file)) break;
++ }
++
++ /* seek to input data */
++ if (sys->seek(self->d->infh, self->d->inoffset, MSPACK_SYS_SEEK_START)) {
++ self->error = MSPACK_ERR_SEEK;
++ break;
++ }
++
++ /* get to correct offset. */
++ self->d->outfh = NULL;
++ if ((bytes = file->offset - self->d->offset)) {
++ self->error = lzxd_decompress(self->d->state, bytes);
++ }
++
++ /* if getting to the correct offset was error free, unpack file */
++ if (!self->error) {
++ self->d->outfh = fh;
++ self->error = lzxd_decompress(self->d->state, file->length);
++ }
++
++ /* save offset in input source stream, in case there is a section 0
++ * file between now and the next section 1 file extracted */
++ self->d->inoffset = sys->tell(self->d->infh);
++
++ /* if an LZX error occured, the LZX decompressor is now useless */
++ if (self->error) {
++ if (self->d->state) lzxd_free(self->d->state);
++ self->d->state = NULL;
++ }
++ break;
++ }
++
++ sys->close(fh);
++ return self->error;
++}
++
++/***************************************
++ * CHMD_SYS_WRITE
++ ***************************************
++ * chmd_sys_write is the internal writer function which the decompressor
++ * uses. If either writes data to disk (self->d->outfh) with the real
++ * sys->write() function, or does nothing with the data when
++ * self->d->outfh == NULL. advances self->d->offset.
++ */
++static int chmd_sys_write(struct mspack_file *file, void *buffer, int bytes) {
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) file;
++ self->d->offset += bytes;
++ if (self->d->outfh) {
++ return self->system->write(self->d->outfh, buffer, bytes);
++ }
++ return bytes;
++}
++
++/***************************************
++ * CHMD_INIT_DECOMP
++ ***************************************
++ * Initialises the LZX decompressor to decompress the compressed stream,
++ * from the nearest reset offset and length that is needed for the given
++ * file.
++ */
++static int chmd_init_decomp(struct mschm_decompressor_p *self,
++ struct mschmd_file *file)
++{
++ int window_size, window_bits, reset_interval, entry, err;
++ struct mspack_system *sys = self->system;
++ struct mschmd_sec_mscompressed *sec;
++ unsigned char *data;
++ off_t length, offset;
++
++ sec = (struct mschmd_sec_mscompressed *) file->section;
++
++ /* ensure we have a mscompressed content section */
++ err = find_sys_file(self, sec, &sec->content, content_name);
++ if (err) return self->error = err;
++
++ /* ensure we have a ControlData file */
++ err = find_sys_file(self, sec, &sec->control, control_name);
++ if (err) return self->error = err;
++
++ /* read ControlData */
++ if (sec->control->length < lzxcd_SIZEOF) {
++ D(("ControlData file is too short"))
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++ if (!(data = read_sys_file(self, sec->control))) {
++ D(("can't read mscompressed control data file"))
++ return self->error;
++ }
++
++ /* check LZXC signature */
++ if (EndGetI32(&data[lzxcd_Signature]) != 0x43585A4C) {
++ sys->free(data);
++ return self->error = MSPACK_ERR_SIGNATURE;
++ }
++
++ /* read reset_interval and window_size and validate version number */
++ switch (EndGetI32(&data[lzxcd_Version])) {
++ case 1:
++ reset_interval = EndGetI32(&data[lzxcd_ResetInterval]);
++ window_size = EndGetI32(&data[lzxcd_WindowSize]);
++ break;
++ case 2:
++ reset_interval = EndGetI32(&data[lzxcd_ResetInterval]) * LZX_FRAME_SIZE;
++ window_size = EndGetI32(&data[lzxcd_WindowSize]) * LZX_FRAME_SIZE;
++ break;
++ default:
++ D(("bad controldata version"))
++ sys->free(data);
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* free ControlData */
++ sys->free(data);
++
++ /* find window_bits from window_size */
++ switch (window_size) {
++ case 0x008000: window_bits = 15; break;
++ case 0x010000: window_bits = 16; break;
++ case 0x020000: window_bits = 17; break;
++ case 0x040000: window_bits = 18; break;
++ case 0x080000: window_bits = 19; break;
++ case 0x100000: window_bits = 20; break;
++ case 0x200000: window_bits = 21; break;
++ default:
++ D(("bad controldata window size"))
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* validate reset_interval */
++ if (reset_interval % LZX_FRAME_SIZE) {
++ D(("bad controldata reset interval"))
++ return self->error = MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* which reset table entry would we like? */
++ entry = file->offset / reset_interval;
++ /* convert from reset interval multiple (usually 64k) to 32k frames */
++ entry *= reset_interval / LZX_FRAME_SIZE;
++
++ /* read the reset table entry */
++ if (read_reset_table(self, sec, entry, &length, &offset)) {
++ /* the uncompressed length given in the reset table is dishonest.
++ * the uncompressed data is always padded out from the given
++ * uncompressed length up to the next reset interval */
++ length += reset_interval - 1;
++ length &= -reset_interval;
++ }
++ else {
++ /* if we can't read the reset table entry, just start from
++ * the beginning. Use spaninfo to get the uncompressed length */
++ entry = 0;
++ offset = 0;
++ err = read_spaninfo(self, sec, &length);
++ }
++ if (err) return self->error = err;
++
++ /* get offset of compressed data stream:
++ * = offset of uncompressed section from start of file
++ * + offset of compressed stream from start of uncompressed section
++ * + offset of chosen reset interval from start of compressed stream */
++ self->d->inoffset = file->section->chm->sec0.offset + sec->content->offset + offset;
++
++ /* set start offset and overall remaining stream length */
++ self->d->offset = entry * LZX_FRAME_SIZE;
++ length -= self->d->offset;
++
++ /* initialise LZX stream */
++ self->d->state = lzxd_init(&self->d->sys, self->d->infh,
++ (struct mspack_file *) self, window_bits,
++ reset_interval / LZX_FRAME_SIZE,
++ 4096, length, 0);
++ if (!self->d->state) self->error = MSPACK_ERR_NOMEMORY;
++ return self->error;
++}
++
++/***************************************
++ * READ_RESET_TABLE
++ ***************************************
++ * Reads one entry out of the reset table. Also reads the uncompressed
++ * data length. Writes these to offset_ptr and length_ptr respectively.
++ * Returns non-zero for success, zero for failure.
++ */
++static int read_reset_table(struct mschm_decompressor_p *self,
++ struct mschmd_sec_mscompressed *sec,
++ int entry, off_t *length_ptr, off_t *offset_ptr)
++{
++ struct mspack_system *sys = self->system;
++ unsigned char *data;
++ unsigned int pos, entrysize;
++
++ /* do we have a ResetTable file? */
++ int err = find_sys_file(self, sec, &sec->rtable, rtable_name);
++ if (err) return 0;
++
++ /* read ResetTable file */
++ if (sec->rtable->length < lzxrt_headerSIZEOF) {
++ D(("ResetTable file is too short"))
++ return 0;
++ }
++ if (!(data = read_sys_file(self, sec->rtable))) {
++ D(("can't read reset table"))
++ return 0;
++ }
++
++ /* check sanity of reset table */
++ if (EndGetI32(&data[lzxrt_FrameLen]) != LZX_FRAME_SIZE) {
++ D(("bad reset table frame length"))
++ sys->free(data);
++ return 0;
++ }
++
++ /* get the uncompressed length of the LZX stream */
++ if (read_off64(length_ptr, &data[lzxrt_UncompLen], sys, self->d->infh)) {
++ sys->free(data);
++ return 0;
++ }
++
++ entrysize = EndGetI32(&data[lzxrt_EntrySize]);
++ pos = EndGetI32(&data[lzxrt_TableOffset]) + (entry * entrysize);
++
++ /* ensure reset table entry for this offset exists */
++ if (entry < EndGetI32(&data[lzxrt_NumEntries]) &&
++ pos <= (sec->rtable->length - entrysize))
++ {
++ switch (entrysize) {
++ case 4:
++ *offset_ptr = EndGetI32(&data[pos]);
++ err = 0;
++ break;
++ case 8:
++ err = read_off64(offset_ptr, &data[pos], sys, self->d->infh);
++ break;
++ default:
++ D(("reset table entry size neither 4 nor 8"))
++ err = 1;
++ break;
++ }
++ }
++ else {
++ D(("bad reset interval"))
++ err = 1;
++ }
++
++ /* free the reset table */
++ sys->free(data);
++
++ /* return success */
++ return (err == 0);
++}
++
++/***************************************
++ * READ_SPANINFO
++ ***************************************
++ * Reads the uncompressed data length from the spaninfo file.
++ * Returns zero for success or a non-zero error code for failure.
++ */
++static int read_spaninfo(struct mschm_decompressor_p *self,
++ struct mschmd_sec_mscompressed *sec,
++ off_t *length_ptr)
++{
++ struct mspack_system *sys = self->system;
++ unsigned char *data;
++
++ /* find SpanInfo file */
++ int err = find_sys_file(self, sec, &sec->spaninfo, spaninfo_name);
++ if (err) return MSPACK_ERR_DATAFORMAT;
++
++ /* check it's large enough */
++ if (sec->spaninfo->length != 8) {
++ D(("SpanInfo file is wrong size"))
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* read the SpanInfo file */
++ if (!(data = read_sys_file(self, sec->spaninfo))) {
++ D(("can't read SpanInfo file"))
++ return self->error;
++ }
++
++ /* get the uncompressed length of the LZX stream */
++ err = read_off64(length_ptr, data, sys, self->d->infh);
++
++ sys->free(data);
++ return (err) ? MSPACK_ERR_DATAFORMAT : MSPACK_ERR_OK;
++}
++
++/***************************************
++ * FIND_SYS_FILE
++ ***************************************
++ * Uses chmd_fast_find to locate a system file, and fills out that system
++ * file's entry and links it into the list of system files. Returns zero
++ * for success, non-zero for both failure and the file not existing.
++ */
++static int find_sys_file(struct mschm_decompressor_p *self,
++ struct mschmd_sec_mscompressed *sec,
++ struct mschmd_file **f_ptr, const char *name)
++{
++ struct mspack_system *sys = self->system;
++ struct mschmd_file result;
++
++ /* already loaded */
++ if (*f_ptr) return MSPACK_ERR_OK;
++
++ /* try using fast_find to find the file - return DATAFORMAT error if
++ * it fails, or successfully doesn't find the file */
++ if (chmd_fast_find((struct mschm_decompressor *) self, sec->base.chm,
++ name, &result, (int)sizeof(result)) || !result.section)
++ {
++ return MSPACK_ERR_DATAFORMAT;
++ }
++
++ if (!(*f_ptr = (struct mschmd_file *) sys->alloc(sys, sizeof(result)))) {
++ return MSPACK_ERR_NOMEMORY;
++ }
++
++ /* copy result */
++ *(*f_ptr) = result;
++ (*f_ptr)->filename = (char *) name;
++
++ /* link file into sysfiles list */
++ (*f_ptr)->next = sec->base.chm->sysfiles;
++ sec->base.chm->sysfiles = *f_ptr;
++ return MSPACK_ERR_OK;
++}
++
++/***************************************
++ * READ_SYS_FILE
++ ***************************************
++ * Allocates memory for a section 0 (uncompressed) file and reads it into
++ * memory.
++ */
++static unsigned char *read_sys_file(struct mschm_decompressor_p *self,
++ struct mschmd_file *file)
++{
++ struct mspack_system *sys = self->system;
++ unsigned char *data = NULL;
++ int len;
++
++ if (!file || !file->section || (file->section->id != 0)) {
++ self->error = MSPACK_ERR_DATAFORMAT;
++ return NULL;
++ }
++
++ len = (int) file->length;
++
++ if (!(data = (unsigned char *) sys->alloc(sys, (size_t) len))) {
++ self->error = MSPACK_ERR_NOMEMORY;
++ return NULL;
++ }
++ if (sys->seek(self->d->infh, file->section->chm->sec0.offset
++ + file->offset, MSPACK_SYS_SEEK_START))
++ {
++ self->error = MSPACK_ERR_SEEK;
++ sys->free(data);
++ return NULL;
++ }
++ if (sys->read(self->d->infh, data, len) != len) {
++ self->error = MSPACK_ERR_READ;
++ sys->free(data);
++ return NULL;
++ }
++ return data;
++}
++
++/***************************************
++ * CHMD_ERROR
++ ***************************************
++ * returns the last error that occurred
++ */
++static int chmd_error(struct mschm_decompressor *base) {
++ struct mschm_decompressor_p *self = (struct mschm_decompressor_p *) base;
++ return (self) ? self->error : MSPACK_ERR_ARGS;
++}
++
++/***************************************
++ * READ_OFF64
++ ***************************************
++ * Reads a 64-bit signed integer from memory in Intel byte order.
++ * If running on a system with a 64-bit off_t, this is simply done.
++ * If running on a system with a 32-bit off_t, offsets up to 0x7FFFFFFF
++ * are accepted, offsets beyond that cause an error message.
++ */
++static int read_off64(off_t *var, unsigned char *mem,
++ struct mspack_system *sys, struct mspack_file *fh)
++{
++#ifdef LARGEFILE_SUPPORT
++ *var = EndGetI64(mem);
++#else
++ *var = EndGetI32(mem);
++ if ((*var & 0x80000000) || EndGetI32(mem+4)) {
++ sys->message(fh, (char *)largefile_msg);
++ return 1;
++ }
++#endif
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/crc32.c b/libclamav/libmspack-0.4alpha/mspack/crc32.c
+new file mode 100644
+index 000000000000..4bb0ef49ba29
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/crc32.c
+@@ -0,0 +1,95 @@
++/*
++ * COPYRIGHT (C) 1986 Gary S. Brown. You may use this program, or
++ * code or tables extracted from it, as desired without restriction.
++ *
++ * First, the polynomial itself and its table of feedback terms. The
++ * polynomial is
++ * X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0
++ *
++ * Note that we take it "backwards" and put the highest-order term in
++ * the lowest-order bit. The X^32 term is "implied"; the LSB is the
++ * X^31 term, etc. The X^0 term (usually shown as "+1") results in
++ * the MSB being 1
++ *
++ * Note that the usual hardware shift register implementation, which
++ * is what we're using (we're merely optimizing it by doing eight-bit
++ * chunks at a time) shifts bits into the lowest-order term. In our
++ * implementation, that means shifting towards the right. Why do we
++ * do it this way? Because the calculated CRC must be transmitted in
++ * order from highest-order term to lowest-order term. UARTs transmit
++ * characters in order from LSB to MSB. By storing the CRC this way
++ * we hand it to the UART in the order low-byte to high-byte; the UART
++ * sends each low-bit to hight-bit; and the result is transmission bit
++ * by bit from highest- to lowest-order term without requiring any bit
++ * shuffling on our part. Reception works similarly
++ *
++ * The feedback terms table consists of 256, 32-bit entries. Notes
++ *
++ * The table can be generated at runtime if desired; code to do so
++ * is shown later. It might not be obvious, but the feedback
++ * terms simply represent the results of eight shift/xor opera
++ * tions for all combinations of data and CRC register values
++ *
++ * The values must be right-shifted by eight bits by the "updcrc
++ * logic; the shift must be unsigned (bring in zeroes). On some
++ * hardware you could probably optimize the shift in assembler by
++ * using byte-swap instructions
++ * polynomial $edb88320
++ */
++
++#include "crc32.h"
++
++const unsigned int crc32_table[256] = {
++ 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
++ 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
++ 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
++ 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
++ 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
++ 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
++ 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
++ 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
++ 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
++ 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
++ 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
++ 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
++ 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
++ 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
++ 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
++ 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
++ 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
++ 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
++ 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
++ 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
++ 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
++ 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
++ 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
++ 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
++ 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
++ 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
++ 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
++ 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
++ 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
++ 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
++ 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
++ 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
++ 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
++ 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
++ 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
++ 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
++ 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
++ 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
++ 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
++ 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
++ 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
++ 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
++ 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
++ 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
++ 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
++ 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
++ 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
++ 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
++ 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
++ 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
++ 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
++ 0x2d02ef8dL
++};
+diff --git a/libclamav/libmspack-0.4alpha/mspack/crc32.h b/libclamav/libmspack-0.4alpha/mspack/crc32.h
+new file mode 100644
+index 000000000000..8415f2eef602
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/crc32.h
+@@ -0,0 +1,17 @@
++#ifndef CRC32_H
++#define CRC32_H
++
++extern const unsigned int crc32_table[256];
++
++/* Return a 32-bit CRC of the contents of the buffer. */
++
++static inline unsigned int
++crc32(unsigned int val, const void *ss, int len)
++{
++ const unsigned char *s = ss;
++ while (--len >= 0)
++ val = crc32_table[(val ^ *s++) & 0xff] ^ (val >> 8);
++ return val;
++}
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/des.h b/libclamav/libmspack-0.4alpha/mspack/des.h
+new file mode 100644
+index 000000000000..64a1ed27e4d4
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/des.h
+@@ -0,0 +1,15 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_DES_H
++#define MSPACK_DES_H 1
++
++/* DES encryption / decryption definitions */
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/hlp.h b/libclamav/libmspack-0.4alpha/mspack/hlp.h
+new file mode 100644
+index 000000000000..b7486fa16068
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/hlp.h
+@@ -0,0 +1,33 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_HLP_H
++#define MSPACK_HLP_H 1
++
++#include <lzss.h>
++
++/* generic HLP definitions */
++
++/* HLP compression definitions */
++
++struct mshlp_compressor_p {
++ struct mshlp_compressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++/* HLP decompression definitions */
++
++struct mshlp_decompressor_p {
++ struct mshlp_decompressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/hlpc.c b/libclamav/libmspack-0.4alpha/mspack/hlpc.c
+new file mode 100644
+index 000000000000..60eabfe207d8
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/hlpc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* HLP compression implementation */
++
++#include <system.h>
++#include <hlp.h>
++
++struct mshlp_compressor *
++ mspack_create_hlp_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_hlp_compressor(struct mshlp_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/hlpd.c b/libclamav/libmspack-0.4alpha/mspack/hlpd.c
+new file mode 100644
+index 000000000000..43354f008f4f
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/hlpd.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* HLP decompression implementation */
++
++#include <system.h>
++#include <hlp.h>
++
++struct mshlp_decompressor *
++ mspack_create_hlp_decompressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_hlp_decompressor(struct mshlp_decompressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/kwaj.h b/libclamav/libmspack-0.4alpha/mspack/kwaj.h
+new file mode 100644
+index 000000000000..09673c07793e
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/kwaj.h
+@@ -0,0 +1,118 @@
++/* This file is part of libmspack.
++ * (C) 2003-2010 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_KWAJ_H
++#define MSPACK_KWAJ_H 1
++
++#include <lzss.h>
++
++/* generic KWAJ definitions */
++#define kwajh_Signature1 (0x00)
++#define kwajh_Signature2 (0x04)
++#define kwajh_CompMethod (0x08)
++#define kwajh_DataOffset (0x0a)
++#define kwajh_Flags (0x0c)
++#define kwajh_SIZEOF (0x0e)
++
++/* KWAJ compression definitions */
++
++struct mskwaj_compressor_p {
++ struct mskwaj_compressor base;
++ struct mspack_system *system;
++ /* todo */
++ int param[2]; /* !!! MATCH THIS TO NUM OF PARAMS IN MSPACK.H !!! */
++ int error;
++};
++
++/* KWAJ decompression definitions */
++
++struct mskwaj_decompressor_p {
++ struct mskwaj_decompressor base;
++ struct mspack_system *system;
++ int error;
++};
++
++struct mskwajd_header_p {
++ struct mskwajd_header base;
++ struct mspack_file *fh;
++};
++
++/* input buffer size during decompression - not worth parameterising IMHO */
++#define KWAJ_INPUT_SIZE (2048)
++
++/* huffman codes that are 9 bits or less are decoded immediately */
++#define KWAJ_TABLEBITS (9)
++
++/* number of codes in each huffman table */
++#define KWAJ_MATCHLEN1_SYMS (16)
++#define KWAJ_MATCHLEN2_SYMS (16)
++#define KWAJ_LITLEN_SYMS (32)
++#define KWAJ_OFFSET_SYMS (64)
++#define KWAJ_LITERAL_SYMS (256)
++
++/* define decoding table sizes */
++#define KWAJ_TABLESIZE (1 << KWAJ_TABLEBITS)
++#if KWAJ_TABLESIZE < (KWAJ_MATCHLEN1_SYMS * 2)
++# define KWAJ_MATCHLEN1_TBLSIZE (KWAJ_MATCHLEN1_SYMS * 4)
++#else
++# define KWAJ_MATCHLEN1_TBLSIZE (KWAJ_TABLESIZE + (KWAJ_MATCHLEN1_SYMS * 2))
++#endif
++#if KWAJ_TABLESIZE < (KWAJ_MATCHLEN2_SYMS * 2)
++# define KWAJ_MATCHLEN2_TBLSIZE (KWAJ_MATCHLEN2_SYMS * 4)
++#else
++# define KWAJ_MATCHLEN2_TBLSIZE (KWAJ_TABLESIZE + (KWAJ_MATCHLEN2_SYMS * 2))
++#endif
++#if KWAJ_TABLESIZE < (KWAJ_LITLEN_SYMS * 2)
++# define KWAJ_LITLEN_TBLSIZE (KWAJ_LITLEN_SYMS * 4)
++#else
++# define KWAJ_LITLEN_TBLSIZE (KWAJ_TABLESIZE + (KWAJ_LITLEN_SYMS * 2))
++#endif
++#if KWAJ_TABLESIZE < (KWAJ_OFFSET_SYMS * 2)
++# define KWAJ_OFFSET_TBLSIZE (KWAJ_OFFSET_SYMS * 4)
++#else
++# define KWAJ_OFFSET_TBLSIZE (KWAJ_TABLESIZE + (KWAJ_OFFSET_SYMS * 2))
++#endif
++#if KWAJ_TABLESIZE < (KWAJ_LITERAL_SYMS * 2)
++# define KWAJ_LITERAL_TBLSIZE (KWAJ_LITERAL_SYMS * 4)
++#else
++# define KWAJ_LITERAL_TBLSIZE (KWAJ_TABLESIZE + (KWAJ_LITERAL_SYMS * 2))
++#endif
++
++struct kwajd_stream {
++ /* I/O buffering */
++ struct mspack_system *sys;
++ struct mspack_file *input;
++ struct mspack_file *output;
++ unsigned char *i_ptr, *i_end;
++ unsigned int bit_buffer, bits_left;
++ int input_end;
++
++ /* huffman code lengths */
++ unsigned char MATCHLEN1_len [KWAJ_MATCHLEN1_SYMS];
++ unsigned char MATCHLEN2_len [KWAJ_MATCHLEN2_SYMS];
++ unsigned char LITLEN_len [KWAJ_LITLEN_SYMS];
++ unsigned char OFFSET_len [KWAJ_OFFSET_SYMS];
++ unsigned char LITERAL_len [KWAJ_LITERAL_SYMS];
++
++ /* huffman decoding tables */
++ unsigned short MATCHLEN1_table [KWAJ_MATCHLEN1_TBLSIZE];
++ unsigned short MATCHLEN2_table [KWAJ_MATCHLEN2_TBLSIZE];
++ unsigned short LITLEN_table [KWAJ_LITLEN_TBLSIZE];
++ unsigned short OFFSET_table [KWAJ_OFFSET_TBLSIZE];
++ unsigned short LITERAL_table [KWAJ_LITERAL_TBLSIZE];
++
++ /* input buffer */
++ unsigned char inbuf[KWAJ_INPUT_SIZE];
++
++ /* history window */
++ unsigned char window[LZSS_WINDOW_SIZE];
++};
++
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/kwajc.c b/libclamav/libmspack-0.4alpha/mspack/kwajc.c
+new file mode 100644
+index 000000000000..b88ed7690a8a
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/kwajc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* KWAJ compression implementation */
++
++#include <system.h>
++#include <kwaj.h>
++
++struct mskwaj_compressor *
++ mspack_create_kwaj_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_kwaj_compressor(struct mskwaj_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/kwajd.c b/libclamav/libmspack-0.4alpha/mspack/kwajd.c
+new file mode 100644
+index 000000000000..bd4ee87739a0
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/kwajd.c
+@@ -0,0 +1,561 @@
++/* This file is part of libmspack.
++ * (C) 2003-2011 Stuart Caie.
++ *
++ * KWAJ is a format very similar to SZDD. KWAJ method 3 (LZH) was
++ * written by Jeff Johnson.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* KWAJ decompression implementation */
++
++#include <system.h>
++#include <kwaj.h>
++#include <mszip.h>
++
++/* prototypes */
++static struct mskwajd_header *kwajd_open(
++ struct mskwaj_decompressor *base, const char *filename);
++static void kwajd_close(
++ struct mskwaj_decompressor *base, struct mskwajd_header *hdr);
++static int kwajd_read_headers(
++ struct mspack_system *sys, struct mspack_file *fh,
++ struct mskwajd_header *hdr);
++static int kwajd_extract(
++ struct mskwaj_decompressor *base, struct mskwajd_header *hdr,
++ const char *filename);
++static int kwajd_decompress(
++ struct mskwaj_decompressor *base, const char *input, const char *output);
++static int kwajd_error(
++ struct mskwaj_decompressor *base);
++
++static struct kwajd_stream *lzh_init(
++ struct mspack_system *sys, struct mspack_file *in, struct mspack_file *out);
++static int lzh_decompress(
++ struct kwajd_stream *kwaj);
++static void lzh_free(
++ struct kwajd_stream *kwaj);
++static int lzh_read_lens(
++ struct kwajd_stream *kwaj,
++ unsigned int type, unsigned int numsyms,
++ unsigned char *lens, unsigned short *table);
++static int lzh_read_input(
++ struct kwajd_stream *kwaj);
++
++
++/***************************************
++ * MSPACK_CREATE_KWAJ_DECOMPRESSOR
++ ***************************************
++ * constructor
++ */
++struct mskwaj_decompressor *
++ mspack_create_kwaj_decompressor(struct mspack_system *sys)
++{
++ struct mskwaj_decompressor_p *self = NULL;
++
++ if (!sys) sys = mspack_default_system;
++ if (!mspack_valid_system(sys)) return NULL;
++
++ if ((self = (struct mskwaj_decompressor_p *) sys->alloc(sys, sizeof(struct mskwaj_decompressor_p)))) {
++ self->base.open = &kwajd_open;
++ self->base.close = &kwajd_close;
++ self->base.extract = &kwajd_extract;
++ self->base.decompress = &kwajd_decompress;
++ self->base.last_error = &kwajd_error;
++ self->system = sys;
++ self->error = MSPACK_ERR_OK;
++ }
++ return (struct mskwaj_decompressor *) self;
++}
++
++/***************************************
++ * MSPACK_DESTROY_KWAJ_DECOMPRESSOR
++ ***************************************
++ * destructor
++ */
++void mspack_destroy_kwaj_decompressor(struct mskwaj_decompressor *base)
++{
++ struct mskwaj_decompressor_p *self = (struct mskwaj_decompressor_p *) base;
++ if (self) {
++ struct mspack_system *sys = self->system;
++ sys->free(self);
++ }
++}
++
++/***************************************
++ * KWAJD_OPEN
++ ***************************************
++ * opens a KWAJ file without decompressing, reads header
++ */
++static struct mskwajd_header *kwajd_open(struct mskwaj_decompressor *base,
++ const char *filename)
++{
++ struct mskwaj_decompressor_p *self = (struct mskwaj_decompressor_p *) base;
++ struct mskwajd_header *hdr;
++ struct mspack_system *sys;
++ struct mspack_file *fh;
++
++ if (!self) return NULL;
++ sys = self->system;
++
++ fh = sys->open(sys, filename, MSPACK_SYS_OPEN_READ);
++ hdr = (struct mskwajd_header *) sys->alloc(sys, sizeof(struct mskwajd_header_p));
++ if (fh && hdr) {
++ ((struct mskwajd_header_p *) hdr)->fh = fh;
++ self->error = kwajd_read_headers(sys, fh, hdr);
++ }
++ else {
++ if (!fh) self->error = MSPACK_ERR_OPEN;
++ if (!hdr) self->error = MSPACK_ERR_NOMEMORY;
++ }
++
++ if (self->error) {
++ if (fh) sys->close(fh);
++ if (hdr) sys->free(hdr);
++ hdr = NULL;
++ }
++
++ return hdr;
++}
++
++/***************************************
++ * KWAJD_CLOSE
++ ***************************************
++ * closes a KWAJ file
++ */
++static void kwajd_close(struct mskwaj_decompressor *base,
++ struct mskwajd_header *hdr)
++{
++ struct mskwaj_decompressor_p *self = (struct mskwaj_decompressor_p *) base;
++ struct mskwajd_header_p *hdr_p = (struct mskwajd_header_p *) hdr;
++
++ if (!self || !self->system) return;
++
++ /* close the file handle associated */
++ self->system->close(hdr_p->fh);
++
++ /* free the memory associated */
++ self->system->free(hdr);
++
++ self->error = MSPACK_ERR_OK;
++}
++
++/***************************************
++ * KWAJD_READ_HEADERS
++ ***************************************
++ * reads the headers of a KWAJ format file
++ */
++static int kwajd_read_headers(struct mspack_system *sys,
++ struct mspack_file *fh,
++ struct mskwajd_header *hdr)
++{
++ unsigned char buf[16];
++ int i;
++
++ /* read in the header */
++ if (sys->read(fh, &buf[0], kwajh_SIZEOF) != kwajh_SIZEOF) {
++ return MSPACK_ERR_READ;
++ }
++
++ /* check for "KWAJ" signature */
++ if (((unsigned int) EndGetI32(&buf[kwajh_Signature1]) != 0x4A41574B) ||
++ ((unsigned int) EndGetI32(&buf[kwajh_Signature2]) != 0xD127F088))
++ {
++ return MSPACK_ERR_SIGNATURE;
++ }
++
++ /* basic header fields */
++ hdr->comp_type = EndGetI16(&buf[kwajh_CompMethod]);
++ hdr->data_offset = EndGetI16(&buf[kwajh_DataOffset]);
++ hdr->headers = EndGetI16(&buf[kwajh_Flags]);
++ hdr->length = 0;
++ hdr->filename = NULL;
++ hdr->extra = NULL;
++ hdr->extra_length = 0;
++
++ /* optional headers */
++
++ /* 4 bytes: length of unpacked file */
++ if (hdr->headers & MSKWAJ_HDR_HASLENGTH) {
++ if (sys->read(fh, &buf[0], 4) != 4) return MSPACK_ERR_READ;
++ hdr->length = EndGetI32(&buf[0]);
++ }
++
++ /* 2 bytes: unknown purpose */
++ if (hdr->headers & MSKWAJ_HDR_HASUNKNOWN1) {
++ if (sys->read(fh, &buf[0], 2) != 2) return MSPACK_ERR_READ;
++ }
++
++ /* 2 bytes: length of section, then [length] bytes: unknown purpose */
++ if (hdr->headers & MSKWAJ_HDR_HASUNKNOWN2) {
++ if (sys->read(fh, &buf[0], 2) != 2) return MSPACK_ERR_READ;
++ i = EndGetI16(&buf[0]);
++ if (sys->seek(fh, (off_t)i, MSPACK_SYS_SEEK_CUR)) return MSPACK_ERR_SEEK;
++ }
++
++ /* filename and extension */
++ if (hdr->headers & (MSKWAJ_HDR_HASFILENAME | MSKWAJ_HDR_HASFILEEXT)) {
++ off_t pos = sys->tell(fh);
++ char *fn = (char *) sys->alloc(sys, (size_t) 13);
++
++ /* allocate memory for maximum length filename */
++ if (! fn) return MSPACK_ERR_NOMEMORY;
++ hdr->filename = fn;
++
++ /* copy filename if present */
++ if (hdr->headers & MSKWAJ_HDR_HASFILENAME) {
++ if (sys->read(fh, &buf[0], 9) != 9) return MSPACK_ERR_READ;
++ for (i = 0; i < 9; i++, fn++) if (!(*fn = buf[i])) break;
++ pos += (i < 9) ? i+1 : 9;
++ if (sys->seek(fh, pos, MSPACK_SYS_SEEK_START))
++ return MSPACK_ERR_SEEK;
++ }
++
++ /* copy extension if present */
++ if (hdr->headers & MSKWAJ_HDR_HASFILEEXT) {
++ *fn++ = '.';
++ if (sys->read(fh, &buf[0], 4) != 4) return MSPACK_ERR_READ;
++ for (i = 0; i < 4; i++, fn++) if (!(*fn = buf[i])) break;
++ pos += (i < 4) ? i+1 : 4;
++ if (sys->seek(fh, pos, MSPACK_SYS_SEEK_START))
++ return MSPACK_ERR_SEEK;
++ }
++ *fn = '\0';
++ }
++
++ /* 2 bytes: extra text length then [length] bytes of extra text data */
++ if (hdr->headers & MSKWAJ_HDR_HASEXTRATEXT) {
++ if (sys->read(fh, &buf[0], 2) != 2) return MSPACK_ERR_READ;
++ i = EndGetI16(&buf[0]);
++ hdr->extra = (char *) sys->alloc(sys, (size_t)i+1);
++ if (! hdr->extra) return MSPACK_ERR_NOMEMORY;
++ if (sys->read(fh, hdr->extra, i) != i) return MSPACK_ERR_READ;
++ hdr->extra[i] = '\0';
++ hdr->extra_length = i;
++ }
++ return MSPACK_ERR_OK;
++}
++
++/***************************************
++ * KWAJD_EXTRACT
++ ***************************************
++ * decompresses a KWAJ file
++ */
++static int kwajd_extract(struct mskwaj_decompressor *base,
++ struct mskwajd_header *hdr, const char *filename)
++{
++ struct mskwaj_decompressor_p *self = (struct mskwaj_decompressor_p *) base;
++ struct mspack_system *sys;
++ struct mspack_file *fh, *outfh;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ if (!hdr) return self->error = MSPACK_ERR_ARGS;
++
++ sys = self->system;
++ fh = ((struct mskwajd_header_p *) hdr)->fh;
++
++ /* seek to the compressed data */
++ if (sys->seek(fh, hdr->data_offset, MSPACK_SYS_SEEK_START)) {
++ return self->error = MSPACK_ERR_SEEK;
++ }
++
++ /* open file for output */
++ if (!(outfh = sys->open(sys, filename, MSPACK_SYS_OPEN_WRITE))) {
++ return self->error = MSPACK_ERR_OPEN;
++ }
++
++ self->error = MSPACK_ERR_OK;
++
++ /* decompress based on format */
++ if (hdr->comp_type == MSKWAJ_COMP_NONE ||
++ hdr->comp_type == MSKWAJ_COMP_XOR)
++ {
++ /* NONE is a straight copy. XOR is a copy xored with 0xFF */
++ unsigned char *buf = (unsigned char *) sys->alloc(sys, (size_t) KWAJ_INPUT_SIZE);
++ if (buf) {
++ int read, i;
++ while ((read = sys->read(fh, buf, KWAJ_INPUT_SIZE)) > 0) {
++ if (hdr->comp_type == MSKWAJ_COMP_XOR) {
++ for (i = 0; i < read; i++) buf[i] ^= 0xFF;
++ }
++ if (sys->write(outfh, buf, read) != read) {
++ self->error = MSPACK_ERR_WRITE;
++ break;
++ }
++ }
++ if (read < 0) self->error = MSPACK_ERR_READ;
++ sys->free(buf);
++ }
++ else {
++ self->error = MSPACK_ERR_NOMEMORY;
++ }
++ }
++ else if (hdr->comp_type == MSKWAJ_COMP_SZDD) {
++ self->error = lzss_decompress(sys, fh, outfh, KWAJ_INPUT_SIZE,
++ LZSS_MODE_EXPAND);
++ }
++ else if (hdr->comp_type == MSKWAJ_COMP_LZH) {
++ struct kwajd_stream *lzh = lzh_init(sys, fh, outfh);
++ self->error = (lzh) ? lzh_decompress(lzh) : MSPACK_ERR_NOMEMORY;
++ lzh_free(lzh);
++ }
++ else if (hdr->comp_type == MSKWAJ_COMP_MSZIP) {
++ struct mszipd_stream *zip = mszipd_init(sys,fh,outfh,KWAJ_INPUT_SIZE,0);
++ self->error = (zip) ? mszipd_decompress_kwaj(zip) : MSPACK_ERR_NOMEMORY;
++ mszipd_free(zip);
++ }
++ else {
++ self->error = MSPACK_ERR_DATAFORMAT;
++ }
++
++ /* close output file */
++ sys->close(outfh);
++
++ return self->error;
++}
++
++/***************************************
++ * KWAJD_DECOMPRESS
++ ***************************************
++ * unpacks directly from input to output
++ */
++static int kwajd_decompress(struct mskwaj_decompressor *base,
++ const char *input, const char *output)
++{
++ struct mskwaj_decompressor_p *self = (struct mskwaj_decompressor_p *) base;
++ struct mskwajd_header *hdr;
++ int error;
++
++ if (!self) return MSPACK_ERR_ARGS;
++
++ if (!(hdr = kwajd_open(base, input))) return self->error;
++ error = kwajd_extract(base, hdr, output);
++ kwajd_close(base, hdr);
++ return self->error = error;
++}
++
++/***************************************
++ * KWAJD_ERROR
++ ***************************************
++ * returns the last error that occurred
++ */
++static int kwajd_error(struct mskwaj_decompressor *base)
++{
++ struct mskwaj_decompressor_p *self = (struct mskwaj_decompressor_p *) base;
++ return (self) ? self->error : MSPACK_ERR_ARGS;
++}
++
++/***************************************
++ * LZH_INIT, LZH_DECOMPRESS, LZH_FREE
++ ***************************************
++ * unpacks KWAJ method 3 files
++ */
++
++/* import bit-reading macros and code */
++#define BITS_TYPE struct kwajd_stream
++#define BITS_VAR lzh
++#define BITS_ORDER_MSB
++#define BITS_NO_READ_INPUT
++#define READ_BYTES do { \
++ if (i_ptr >= i_end) { \
++ if ((err = lzh_read_input(lzh))) return err; \
++ i_ptr = lzh->i_ptr; \
++ i_end = lzh->i_end; \
++ } \
++ INJECT_BITS(*i_ptr++, 8); \
++} while (0)
++#include <readbits.h>
++
++/* import huffman-reading macros and code */
++#define TABLEBITS(tbl) KWAJ_TABLEBITS
++#define MAXSYMBOLS(tbl) KWAJ_##tbl##_SYMS
++#define HUFF_TABLE(tbl,idx) lzh->tbl##_table[idx]
++#define HUFF_LEN(tbl,idx) lzh->tbl##_len[idx]
++#define HUFF_ERROR return MSPACK_ERR_DATAFORMAT
++#include <readhuff.h>
++
++/* In the KWAJ LZH format, there is no special 'eof' marker, it just
++ * ends. Depending on how many bits are left in the final byte when
++ * the stream ends, that might be enough to start another literal or
++ * match. The only easy way to detect that we've come to an end is to
++ * guard all bit-reading. We allow fake bits to be read once we reach
++ * the end of the stream, but we check if we then consumed any of
++ * those fake bits, after doing the READ_BITS / READ_HUFFSYM. This
++ * isn't how the default readbits.h read_input() works (it simply lets
++ * 2 fake bytes in then stops), so we implement our own.
++ */
++#define READ_BITS_SAFE(val, n) do { \
++ READ_BITS(val, n); \
++ if (lzh->input_end && bits_left < lzh->input_end) \
++ return MSPACK_ERR_OK; \
++} while (0)
++
++#define READ_HUFFSYM_SAFE(tbl, val) do { \
++ READ_HUFFSYM(tbl, val); \
++ if (lzh->input_end && bits_left < lzh->input_end) \
++ return MSPACK_ERR_OK; \
++} while (0)
++
++#define BUILD_TREE(tbl, type) \
++ STORE_BITS; \
++ err = lzh_read_lens(lzh, type, MAXSYMBOLS(tbl), \
++ &HUFF_LEN(tbl,0), &HUFF_TABLE(tbl,0)); \
++ if (err) return err; \
++ RESTORE_BITS; \
++ if (make_decode_table(MAXSYMBOLS(tbl), TABLEBITS(tbl), \
++ &HUFF_LEN(tbl,0), &HUFF_TABLE(tbl,0))) \
++ return MSPACK_ERR_DATAFORMAT;
++
++#define WRITE_BYTE do { \
++ if (lzh->sys->write(lzh->output, &lzh->window[pos], 1) != 1) \
++ return MSPACK_ERR_WRITE; \
++} while (0)
++
++static struct kwajd_stream *lzh_init(struct mspack_system *sys,
++ struct mspack_file *in, struct mspack_file *out)
++{
++ struct kwajd_stream *lzh;
++
++ if (!sys || !in || !out) return NULL;
++ if (!(lzh = (struct kwajd_stream *) sys->alloc(sys, sizeof(struct kwajd_stream)))) return NULL;
++
++ lzh->sys = sys;
++ lzh->input = in;
++ lzh->output = out;
++ return lzh;
++}
++
++static int lzh_decompress(struct kwajd_stream *lzh)
++{
++ register unsigned int bit_buffer;
++ register int bits_left, i;
++ register unsigned short sym;
++ unsigned char *i_ptr, *i_end, lit_run = 0;
++ int j, pos = 0, len, offset, err;
++ unsigned int types[6];
++
++ /* reset global state */
++ INIT_BITS;
++ RESTORE_BITS;
++ memset(&lzh->window[0], LZSS_WINDOW_FILL, (size_t) LZSS_WINDOW_SIZE);
++
++ /* read 6 encoding types (for byte alignment) but only 5 are needed */
++ for (i = 0; i < 6; i++) READ_BITS_SAFE(types[i], 4);
++
++ /* read huffman table symbol lengths and build huffman trees */
++ BUILD_TREE(MATCHLEN1, types[0]);
++ BUILD_TREE(MATCHLEN2, types[1]);
++ BUILD_TREE(LITLEN, types[2]);
++ BUILD_TREE(OFFSET, types[3]);
++ BUILD_TREE(LITERAL, types[4]);
++
++ while (!lzh->input_end) {
++ if (lit_run) READ_HUFFSYM_SAFE(MATCHLEN2, len);
++ else READ_HUFFSYM_SAFE(MATCHLEN1, len);
++
++ if (len > 0) {
++ len += 2;
++ lit_run = 0; /* not the end of a literal run */
++ READ_HUFFSYM_SAFE(OFFSET, j); offset = j << 6;
++ READ_BITS_SAFE(j, 6); offset |= j;
++
++ /* copy match as output and into the ring buffer */
++ while (len-- > 0) {
++ lzh->window[pos] = lzh->window[(pos+4096-offset) & 4095];
++ WRITE_BYTE;
++ pos++; pos &= 4095;
++ }
++ }
++ else {
++ READ_HUFFSYM_SAFE(LITLEN, len); len++;
++ lit_run = (len == 32) ? 0 : 1; /* end of a literal run? */
++ while (len-- > 0) {
++ READ_HUFFSYM_SAFE(LITERAL, j);
++ /* copy as output and into the ring buffer */
++ lzh->window[pos] = j;
++ WRITE_BYTE;
++ pos++; pos &= 4095;
++ }
++ }
++ }
++ return MSPACK_ERR_OK;
++}
++
++static void lzh_free(struct kwajd_stream *lzh)
++{
++ struct mspack_system *sys;
++ if (!lzh || !lzh->sys) return;
++ sys = lzh->sys;
++ sys->free(lzh);
++}
++
++static int lzh_read_lens(struct kwajd_stream *lzh,
++ unsigned int type, unsigned int numsyms,
++ unsigned char *lens, unsigned short *table)
++{
++ register unsigned int bit_buffer;
++ register int bits_left;
++ unsigned char *i_ptr, *i_end;
++ unsigned int i, c, sel;
++ int err;
++
++ RESTORE_BITS;
++ switch (type) {
++ case 0:
++ i = numsyms; c = (i==16)?4: (i==32)?5: (i==64)?6: (i==256)?8 :0;
++ for (i = 0; i < numsyms; i++) lens[i] = c;
++ break;
++
++ case 1:
++ READ_BITS_SAFE(c, 4); lens[0] = c;
++ for (i = 1; i < numsyms; i++) {
++ READ_BITS_SAFE(sel, 1); if (sel == 0) lens[i] = c;
++ else { READ_BITS_SAFE(sel, 1); if (sel == 0) lens[i] = ++c;
++ else { READ_BITS_SAFE(c, 4); lens[i] = c; }}
++ }
++ break;
++
++ case 2:
++ READ_BITS_SAFE(c, 4); lens[0] = c;
++ for (i = 1; i < numsyms; i++) {
++ READ_BITS_SAFE(sel, 2);
++ if (sel == 3) READ_BITS_SAFE(c, 4); else c += (char) sel-1;
++ lens[i] = c;
++ }
++ break;
++
++ case 3:
++ for (i = 0; i < numsyms; i++) {
++ READ_BITS_SAFE(c, 4); lens[i] = c;
++ }
++ break;
++ }
++ STORE_BITS;
++ return MSPACK_ERR_OK;
++}
++
++static int lzh_read_input(struct kwajd_stream *lzh) {
++ int read;
++ if (lzh->input_end) {
++ lzh->input_end += 8;
++ lzh->inbuf[0] = 0;
++ read = 1;
++ }
++ else {
++ read = lzh->sys->read(lzh->input, &lzh->inbuf[0], KWAJ_INPUT_SIZE);
++ if (read < 0) return MSPACK_ERR_READ;
++ if (read == 0) {
++ lzh->input_end = 8;
++ lzh->inbuf[0] = 0;
++ read = 1;
++ }
++ }
++
++ /* update i_ptr and i_end */
++ lzh->i_ptr = &lzh->inbuf[0];
++ lzh->i_end = &lzh->inbuf[read];
++ return MSPACK_ERR_OK;
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/lit.h b/libclamav/libmspack-0.4alpha/mspack/lit.h
+new file mode 100644
+index 000000000000..79ba44d87729
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/lit.h
+@@ -0,0 +1,35 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_LIT_H
++#define MSPACK_LIT_H 1
++
++#include <lzx.h>
++#include <des.h>
++#include <sha.h>
++
++/* generic LIT definitions */
++
++/* LIT compression definitions */
++
++struct mslit_compressor_p {
++ struct mslit_compressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++/* LIT decompression definitions */
++
++struct mslit_decompressor_p {
++ struct mslit_decompressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/litc.c b/libclamav/libmspack-0.4alpha/mspack/litc.c
+new file mode 100644
+index 000000000000..a8a709af07af
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/litc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* LIT compression implementation */
++
++#include <system.h>
++#include <lit.h>
++
++struct mslit_compressor *
++ mspack_create_lit_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_lit_compressor(struct mslit_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/litd.c b/libclamav/libmspack-0.4alpha/mspack/litd.c
+new file mode 100644
+index 000000000000..6e0dc9af27c4
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/litd.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* LIT decompression implementation */
++
++#include <system.h>
++#include <lit.h>
++
++struct mslit_decompressor *
++ mspack_create_lit_decompressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_lit_decompressor(struct mslit_decompressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/lzss.h b/libclamav/libmspack-0.4alpha/mspack/lzss.h
+new file mode 100644
+index 000000000000..55e761b5bf91
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/lzss.h
+@@ -0,0 +1,66 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_LZSS_H
++#define MSPACK_LZSS_H 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* LZSS compression / decompression definitions */
++
++#define LZSS_WINDOW_SIZE (4096)
++#define LZSS_WINDOW_FILL (0x20)
++
++#define LZSS_MODE_EXPAND (0)
++#define LZSS_MODE_MSHELP (1)
++#define LZSS_MODE_QBASIC (2)
++
++/**
++ * Decompresses an LZSS stream.
++ *
++ * Input bytes will be read in as necessary using the system->read()
++ * function with the input file handle given. This will continue until
++ * system->read() returns 0 bytes, or an error. Errors will be passed
++ * out of the function as MSPACK_ERR_READ errors. Input streams should
++ * convey an "end of input stream" by refusing to supply all the bytes
++ * that LZSS asks for when they reach the end of the stream, rather
++ * than return an error code.
++ *
++ * Output bytes will be passed to the system->write() function, using
++ * the output file handle given. More than one call may be made to
++ * system->write().
++ *
++ * As EXPAND.EXE (SZDD/KWAJ), Microsoft Help and QBasic have slightly
++ * different encodings for the control byte and matches, a "mode"
++ * parameter is allowed, to choose the encoding.
++ *
++ * @param system an mspack_system structure used to read from
++ * the input stream and write to the output
++ * stream, also to allocate and free memory.
++ * @param input an input stream with the LZSS data.
++ * @param output an output stream to write the decoded data to.
++ * @param input_buffer_size the number of bytes to use as an input
++ * bitstream buffer.
++ * @param mode one of #LZSS_MODE_EXPAND, #LZSS_MODE_MSHELP or
++ * #LZSS_MODE_QBASIC
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++extern int lzss_decompress(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int input_buffer_size,
++ int mode);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/lzssd.c b/libclamav/libmspack-0.4alpha/mspack/lzssd.c
+new file mode 100644
+index 000000000000..df294bc13258
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/lzssd.c
+@@ -0,0 +1,93 @@
++/* This file is part of libmspack.
++ * (C) 2003-2010 Stuart Caie.
++ *
++ * LZSS is a derivative of LZ77 and was created by James Storer and
++ * Thomas Szymanski in 1982. Haruhiko Okumura wrote a very popular C
++ * implementation.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#include <system.h>
++#include <lzss.h>
++
++#define ENSURE_BYTES do { \
++ if (i_ptr >= i_end) { \
++ read = system->read(input, &inbuf[0], \
++ input_buffer_size); \
++ if (read <= 0) { \
++ system->free(window); \
++ return (read < 0) ? MSPACK_ERR_READ \
++ : MSPACK_ERR_OK; \
++ } \
++ i_ptr = &inbuf[0]; i_end = &inbuf[read]; \
++ } \
++} while (0)
++
++#define WRITE_BYTE do { \
++ if (system->write(output, &window[pos], 1) != 1) { \
++ system->free(window); \
++ return MSPACK_ERR_WRITE; \
++ } \
++} while (0)
++
++int lzss_decompress(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int input_buffer_size,
++ int mode)
++{
++ unsigned char *window, *inbuf, *i_ptr, *i_end;
++ unsigned int pos, i, c, invert, mpos, len;
++ int read;
++
++ /* check parameters */
++ if (!system || input_buffer_size < 1 || (mode != LZSS_MODE_EXPAND &&
++ mode != LZSS_MODE_MSHELP && mode != LZSS_MODE_QBASIC))
++ {
++ return MSPACK_ERR_ARGS;
++ }
++
++ /* allocate memory */
++ window = (unsigned char *) system->alloc(system, LZSS_WINDOW_SIZE + input_buffer_size);
++ if (!window) return MSPACK_ERR_NOMEMORY;
++
++ /* initialise decompression */
++ inbuf = &window[LZSS_WINDOW_SIZE];
++ memset(window, LZSS_WINDOW_FILL, (size_t) LZSS_WINDOW_SIZE);
++ pos = LZSS_WINDOW_SIZE - ((mode == LZSS_MODE_QBASIC) ? 18 : 16);
++ invert = (mode == LZSS_MODE_MSHELP) ? ~0 : 0;
++ i_ptr = i_end = &inbuf[0];
++
++ /* loop forever; exit condition is in ENSURE_BYTES macro */
++ for (;;) {
++ ENSURE_BYTES; c = *i_ptr++ ^ invert;
++ for (i = 0x01; i & 0xFF; i <<= 1) {
++ if (c & i) {
++ /* literal */
++ ENSURE_BYTES; window[pos] = *i_ptr++;
++ WRITE_BYTE;
++ pos++; pos &= LZSS_WINDOW_SIZE - 1;
++ }
++ else {
++ /* match */
++ ENSURE_BYTES; mpos = *i_ptr++;
++ ENSURE_BYTES; mpos |= (*i_ptr & 0xF0) << 4;
++ len = (*i_ptr++ & 0x0F) + 3;
++ while (len--) {
++ window[pos] = window[mpos];
++ WRITE_BYTE;
++ pos++; pos &= LZSS_WINDOW_SIZE - 1;
++ mpos++; mpos &= LZSS_WINDOW_SIZE - 1;
++ }
++ }
++ }
++ }
++
++ /* not reached */
++ system->free(window);
++ return MSPACK_ERR_OK;
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/lzx.h b/libclamav/libmspack-0.4alpha/mspack/lzx.h
+new file mode 100644
+index 000000000000..4d3189ea5730
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/lzx.h
+@@ -0,0 +1,221 @@
++/* This file is part of libmspack.
++ * (C) 2003-2013 Stuart Caie.
++ *
++ * The LZX method was created by Jonathan Forbes and Tomi Poutanen, adapted
++ * by Microsoft Corporation.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_LZX_H
++#define MSPACK_LZX_H 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* LZX compression / decompression definitions */
++
++/* some constants defined by the LZX specification */
++#define LZX_MIN_MATCH (2)
++#define LZX_MAX_MATCH (257)
++#define LZX_NUM_CHARS (256)
++#define LZX_BLOCKTYPE_INVALID (0) /* also blocktypes 4-7 invalid */
++#define LZX_BLOCKTYPE_VERBATIM (1)
++#define LZX_BLOCKTYPE_ALIGNED (2)
++#define LZX_BLOCKTYPE_UNCOMPRESSED (3)
++#define LZX_PRETREE_NUM_ELEMENTS (20)
++#define LZX_ALIGNED_NUM_ELEMENTS (8) /* aligned offset tree #elements */
++#define LZX_NUM_PRIMARY_LENGTHS (7) /* this one missing from spec! */
++#define LZX_NUM_SECONDARY_LENGTHS (249) /* length tree #elements */
++
++/* LZX huffman defines: tweak tablebits as desired */
++#define LZX_PRETREE_MAXSYMBOLS (LZX_PRETREE_NUM_ELEMENTS)
++#define LZX_PRETREE_TABLEBITS (6)
++#define LZX_MAINTREE_MAXSYMBOLS (LZX_NUM_CHARS + 290*8)
++#define LZX_MAINTREE_TABLEBITS (12)
++#define LZX_LENGTH_MAXSYMBOLS (LZX_NUM_SECONDARY_LENGTHS+1)
++#define LZX_LENGTH_TABLEBITS (12)
++#define LZX_ALIGNED_MAXSYMBOLS (LZX_ALIGNED_NUM_ELEMENTS)
++#define LZX_ALIGNED_TABLEBITS (7)
++#define LZX_LENTABLE_SAFETY (64) /* table decoding overruns are allowed */
++
++#define LZX_FRAME_SIZE (32768) /* the size of a frame in LZX */
++
++struct lzxd_stream {
++ struct mspack_system *sys; /* I/O routines */
++ struct mspack_file *input; /* input file handle */
++ struct mspack_file *output; /* output file handle */
++
++ off_t offset; /* number of bytes actually output */
++ off_t length; /* overall decompressed length of stream */
++
++ unsigned char *window; /* decoding window */
++ unsigned int window_size; /* window size */
++ unsigned int ref_data_size; /* LZX DELTA reference data size */
++ unsigned int num_offsets; /* number of match_offset entries in table */
++ unsigned int window_posn; /* decompression offset within window */
++ unsigned int frame_posn; /* current frame offset within in window */
++ unsigned int frame; /* the number of 32kb frames processed */
++ unsigned int reset_interval; /* which frame do we reset the compressor? */
++
++ unsigned int R0, R1, R2; /* for the LRU offset system */
++ unsigned int block_length; /* uncompressed length of this LZX block */
++ unsigned int block_remaining; /* uncompressed bytes still left to decode */
++
++ signed int intel_filesize; /* magic header value used for transform */
++ signed int intel_curpos; /* current offset in transform space */
++
++ unsigned char intel_started; /* has intel E8 decoding started? */
++ unsigned char block_type; /* type of the current block */
++ unsigned char header_read; /* have we started decoding at all yet? */
++ unsigned char input_end; /* have we reached the end of input? */
++ unsigned char is_delta; /* does stream follow LZX DELTA spec? */
++
++ int error;
++
++ /* I/O buffering */
++ unsigned char *inbuf, *i_ptr, *i_end, *o_ptr, *o_end;
++ unsigned int bit_buffer, bits_left, inbuf_size;
++
++ /* huffman code lengths */
++ unsigned char PRETREE_len [LZX_PRETREE_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
++ unsigned char MAINTREE_len [LZX_MAINTREE_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
++ unsigned char LENGTH_len [LZX_LENGTH_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
++ unsigned char ALIGNED_len [LZX_ALIGNED_MAXSYMBOLS + LZX_LENTABLE_SAFETY];
++
++ /* huffman decoding tables */
++ unsigned short PRETREE_table [(1 << LZX_PRETREE_TABLEBITS) +
++ (LZX_PRETREE_MAXSYMBOLS * 2)];
++ unsigned short MAINTREE_table[(1 << LZX_MAINTREE_TABLEBITS) +
++ (LZX_MAINTREE_MAXSYMBOLS * 2)];
++ unsigned short LENGTH_table [(1 << LZX_LENGTH_TABLEBITS) +
++ (LZX_LENGTH_MAXSYMBOLS * 2)];
++ unsigned short ALIGNED_table [(1 << LZX_ALIGNED_TABLEBITS) +
++ (LZX_ALIGNED_MAXSYMBOLS * 2)];
++ unsigned char LENGTH_empty;
++
++ /* this is used purely for doing the intel E8 transform */
++ unsigned char e8_buf[LZX_FRAME_SIZE];
++};
++
++/**
++ * Allocates and initialises LZX decompression state for decoding an LZX
++ * stream.
++ *
++ * This routine uses system->alloc() to allocate memory. If memory
++ * allocation fails, or the parameters to this function are invalid,
++ * NULL is returned.
++ *
++ * @param system an mspack_system structure used to read from
++ * the input stream and write to the output
++ * stream, also to allocate and free memory.
++ * @param input an input stream with the LZX data.
++ * @param output an output stream to write the decoded data to.
++ * @param window_bits the size of the decoding window, which must be
++ * between 15 and 21 inclusive for regular LZX
++ * data, or between 17 and 25 inclusive for
++ * LZX DELTA data.
++ * @param reset_interval the interval at which the LZX bitstream is
++ * reset, in multiples of LZX frames (32678
++ * bytes), e.g. a value of 2 indicates the input
++ * stream resets after every 65536 output bytes.
++ * A value of 0 indicates that the bitstream never
++ * resets, such as in CAB LZX streams.
++ * @param input_buffer_size the number of bytes to use as an input
++ * bitstream buffer.
++ * @param output_length the length in bytes of the entirely
++ * decompressed output stream, if known in
++ * advance. It is used to correctly perform the
++ * Intel E8 transformation, which must stop 6
++ * bytes before the very end of the
++ * decompressed stream. It is not otherwise used
++ * or adhered to. If the full decompressed
++ * length is known in advance, set it here.
++ * If it is NOT known, use the value 0, and call
++ * lzxd_set_output_length() once it is
++ * known. If never set, 4 of the final 6 bytes
++ * of the output stream may be incorrect.
++ * @param is_delta should be zero for all regular LZX data,
++ * non-zero for LZX DELTA encoded data.
++ * @return a pointer to an initialised lzxd_stream structure, or NULL if
++ * there was not enough memory or parameters to the function were wrong.
++ */
++extern struct lzxd_stream *lzxd_init(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int window_bits,
++ int reset_interval,
++ int input_buffer_size,
++ off_t output_length,
++ char is_delta);
++
++/* see description of output_length in lzxd_init() */
++extern void lzxd_set_output_length(struct lzxd_stream *lzx,
++ off_t output_length);
++
++/**
++ * Reads LZX DELTA reference data into the window and allows
++ * lzxd_decompress() to reference it.
++ *
++ * Call this before the first call to lzxd_decompress().
++
++ * @param lzx the LZX stream to apply this reference data to
++ * @param system an mspack_system implementation to use with the
++ * input param. Only read() will be called.
++ * @param input an input file handle to read reference data using
++ * system->read().
++ * @param length the length of the reference data. Cannot be longer
++ * than the LZX window size.
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++extern int lzxd_set_reference_data(struct lzxd_stream *lzx,
++ struct mspack_system *system,
++ struct mspack_file *input,
++ unsigned int length);
++
++/**
++ * Decompresses entire or partial LZX streams.
++ *
++ * The number of bytes of data that should be decompressed is given as the
++ * out_bytes parameter. If more bytes are decoded than are needed, they
++ * will be kept over for a later invocation.
++ *
++ * The output bytes will be passed to the system->write() function given in
++ * lzxd_init(), using the output file handle given in lzxd_init(). More than
++ * one call may be made to system->write().
++
++ * Input bytes will be read in as necessary using the system->read()
++ * function given in lzxd_init(), using the input file handle given in
++ * lzxd_init(). This will continue until system->read() returns 0 bytes,
++ * or an error. Errors will be passed out of the function as
++ * MSPACK_ERR_READ errors. Input streams should convey an "end of input
++ * stream" by refusing to supply all the bytes that LZX asks for when they
++ * reach the end of the stream, rather than return an error code.
++ *
++ * If any error code other than MSPACK_ERR_OK is returned, the stream
++ * should be considered unusable and lzxd_decompress() should not be
++ * called again on this stream.
++ *
++ * @param lzx LZX decompression state, as allocated by lzxd_init().
++ * @param out_bytes the number of bytes of data to decompress.
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++extern int lzxd_decompress(struct lzxd_stream *lzx, off_t out_bytes);
++
++/**
++ * Frees all state associated with an LZX data stream. This will call
++ * system->free() using the system pointer given in lzxd_init().
++ *
++ * @param lzx LZX decompression state to free.
++ */
++void lzxd_free(struct lzxd_stream *lzx);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/lzxc.c b/libclamav/libmspack-0.4alpha/mspack/lzxc.c
+new file mode 100644
+index 000000000000..1207a0d747d5
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/lzxc.c
+@@ -0,0 +1,18 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * The LZX method was created by Jonathan Forbes and Tomi Poutanen, adapted
++ * by Microsoft Corporation.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* LZX compression implementation */
++
++#include <system.h>
++#include <lzx.h>
++
++/* todo */
+diff --git a/libclamav/libmspack-0.4alpha/mspack/lzxd.c b/libclamav/libmspack-0.4alpha/mspack/lzxd.c
+new file mode 100644
+index 000000000000..b552e78414c1
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/lzxd.c
+@@ -0,0 +1,895 @@
++/* This file is part of libmspack.
++ * (C) 2003-2013 Stuart Caie.
++ *
++ * The LZX method was created by Jonathan Forbes and Tomi Poutanen, adapted
++ * by Microsoft Corporation.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* LZX decompression implementation */
++
++#include <system.h>
++#include <lzx.h>
++
++/* Microsoft's LZX document (in cab-sdk.exe) and their implementation
++ * of the com.ms.util.cab Java package do not concur.
++ *
++ * In the LZX document, there is a table showing the correlation between
++ * window size and the number of position slots. It states that the 1MB
++ * window = 40 slots and the 2MB window = 42 slots. In the implementation,
++ * 1MB = 42 slots, 2MB = 50 slots. The actual calculation is 'find the
++ * first slot whose position base is equal to or more than the required
++ * window size'. This would explain why other tables in the document refer
++ * to 50 slots rather than 42.
++ *
++ * The constant NUM_PRIMARY_LENGTHS used in the decompression pseudocode
++ * is not defined in the specification.
++ *
++ * The LZX document does not state the uncompressed block has an
++ * uncompressed length field. Where does this length field come from, so
++ * we can know how large the block is? The implementation has it as the 24
++ * bits following after the 3 blocktype bits, before the alignment
++ * padding.
++ *
++ * The LZX document states that aligned offset blocks have their aligned
++ * offset huffman tree AFTER the main and length trees. The implementation
++ * suggests that the aligned offset tree is BEFORE the main and length
++ * trees.
++ *
++ * The LZX document decoding algorithm states that, in an aligned offset
++ * block, if an extra_bits value is 1, 2 or 3, then that number of bits
++ * should be read and the result added to the match offset. This is
++ * correct for 1 and 2, but not 3, where just a huffman symbol (using the
++ * aligned tree) should be read.
++ *
++ * Regarding the E8 preprocessing, the LZX document states 'No translation
++ * may be performed on the last 6 bytes of the input block'. This is
++ * correct. However, the pseudocode provided checks for the *E8 leader*
++ * up to the last 6 bytes. If the leader appears between -10 and -7 bytes
++ * from the end, this would cause the next four bytes to be modified, at
++ * least one of which would be in the last 6 bytes, which is not allowed
++ * according to the spec.
++ *
++ * The specification states that the huffman trees must always contain at
++ * least one element. However, many CAB files contain blocks where the
++ * length tree is completely empty (because there are no matches), and
++ * this is expected to succeed.
++ *
++ * The errors in LZX documentation appear have been corrected in the
++ * new documentation for the LZX DELTA format.
++ *
++ * http://msdn.microsoft.com/en-us/library/cc483133.aspx
++ *
++ * However, this is a different format, an extension of regular LZX.
++ * I have noticed the following differences, there may be more:
++ *
++ * The maximum window size has increased from 2MB to 32MB. This also
++ * increases the maximum number of position slots, etc.
++ *
++ * If the match length is 257 (the maximum possible), this signals
++ * a further length decoding step, that allows for matches up to
++ * 33024 bytes long.
++ *
++ * The format now allows for "reference data", supplied by the caller.
++ * If match offsets go further back than the number of bytes
++ * decompressed so far, that is them accessing the reference data.
++ */
++
++/* import bit-reading macros and code */
++#define BITS_TYPE struct lzxd_stream
++#define BITS_VAR lzx
++#define BITS_ORDER_MSB
++#define READ_BYTES do { \
++ unsigned char b0, b1; \
++ READ_IF_NEEDED; b0 = *i_ptr++; \
++ READ_IF_NEEDED; b1 = *i_ptr++; \
++ INJECT_BITS((b1 << 8) | b0, 16); \
++} while (0)
++#include <readbits.h>
++
++/* import huffman-reading macros and code */
++#define TABLEBITS(tbl) LZX_##tbl##_TABLEBITS
++#define MAXSYMBOLS(tbl) LZX_##tbl##_MAXSYMBOLS
++#define HUFF_TABLE(tbl,idx) lzx->tbl##_table[idx]
++#define HUFF_LEN(tbl,idx) lzx->tbl##_len[idx]
++#define HUFF_ERROR return lzx->error = MSPACK_ERR_DECRUNCH
++#include <readhuff.h>
++
++/* BUILD_TABLE(tbl) builds a huffman lookup table from code lengths */
++#define BUILD_TABLE(tbl) \
++ if (make_decode_table(MAXSYMBOLS(tbl), TABLEBITS(tbl), \
++ &HUFF_LEN(tbl,0), &HUFF_TABLE(tbl,0))) \
++ { \
++ D(("failed to build %s table", #tbl)) \
++ return lzx->error = MSPACK_ERR_DECRUNCH; \
++ }
++
++#define BUILD_TABLE_MAYBE_EMPTY(tbl) do { \
++ lzx->tbl##_empty = 0; \
++ if (make_decode_table(MAXSYMBOLS(tbl), TABLEBITS(tbl), \
++ &HUFF_LEN(tbl,0), &HUFF_TABLE(tbl,0))) \
++ { \
++ for (i = 0; i < MAXSYMBOLS(tbl); i++) { \
++ if (HUFF_LEN(tbl, i) > 0) { \
++ D(("failed to build %s table", #tbl)) \
++ return lzx->error = MSPACK_ERR_DECRUNCH; \
++ } \
++ } \
++ /* empty tree - allow it, but don't decode symbols with it */ \
++ lzx->tbl##_empty = 1; \
++ } \
++} while (0)
++
++/* READ_LENGTHS(tablename, first, last) reads in code lengths for symbols
++ * first to last in the given table. The code lengths are stored in their
++ * own special LZX way.
++ */
++#define READ_LENGTHS(tbl, first, last) do { \
++ STORE_BITS; \
++ if (lzxd_read_lens(lzx, &HUFF_LEN(tbl, 0), (first), \
++ (unsigned int)(last))) return lzx->error; \
++ RESTORE_BITS; \
++} while (0)
++
++static int lzxd_read_lens(struct lzxd_stream *lzx, unsigned char *lens,
++ unsigned int first, unsigned int last)
++{
++ /* bit buffer and huffman symbol decode variables */
++ register unsigned int bit_buffer;
++ register int bits_left, i;
++ register unsigned short sym;
++ unsigned char *i_ptr, *i_end;
++
++ unsigned int x, y;
++ int z;
++
++ RESTORE_BITS;
++
++ /* read lengths for pretree (20 symbols, lengths stored in fixed 4 bits) */
++ for (x = 0; x < 20; x++) {
++ READ_BITS(y, 4);
++ lzx->PRETREE_len[x] = y;
++ }
++ BUILD_TABLE(PRETREE);
++
++ for (x = first; x < last; ) {
++ READ_HUFFSYM(PRETREE, z);
++ if (z == 17) {
++ /* code = 17, run of ([read 4 bits]+4) zeros */
++ READ_BITS(y, 4); y += 4;
++ while (y--) lens[x++] = 0;
++ }
++ else if (z == 18) {
++ /* code = 18, run of ([read 5 bits]+20) zeros */
++ READ_BITS(y, 5); y += 20;
++ while (y--) lens[x++] = 0;
++ }
++ else if (z == 19) {
++ /* code = 19, run of ([read 1 bit]+4) [read huffman symbol] */
++ READ_BITS(y, 1); y += 4;
++ READ_HUFFSYM(PRETREE, z);
++ z = lens[x] - z; if (z < 0) z += 17;
++ while (y--) lens[x++] = z;
++ }
++ else {
++ /* code = 0 to 16, delta current length entry */
++ z = lens[x] - z; if (z < 0) z += 17;
++ lens[x++] = z;
++ }
++ }
++
++ STORE_BITS;
++
++ return MSPACK_ERR_OK;
++}
++
++/* LZX static data tables:
++ *
++ * LZX uses 'position slots' to represent match offsets. For every match,
++ * a small 'position slot' number and a small offset from that slot are
++ * encoded instead of one large offset.
++ *
++ * The number of slots is decided by how many are needed to encode the
++ * largest offset for a given window size. This is easy when the gap between
++ * slots is less than 128Kb, it's a linear relationship. But when extra_bits
++ * reaches its limit of 17 (because LZX can only ensure reading 17 bits of
++ * data at a time), we can only jump 128Kb at a time and have to start
++ * using more and more position slots as each window size doubles.
++ *
++ * position_base[] is an index to the position slot bases
++ *
++ * extra_bits[] states how many bits of offset-from-base data is needed.
++ *
++ * They are calculated as follows:
++ * extra_bits[i] = 0 where i < 4
++ * extra_bits[i] = floor(i/2)-1 where i >= 4 && i < 36
++ * extra_bits[i] = 17 where i >= 36
++ * position_base[0] = 0
++ * position_base[i] = position_base[i-1] + (1 << extra_bits[i-1])
++ */
++static const unsigned int position_slots[11] = {
++ 30, 32, 34, 36, 38, 42, 50, 66, 98, 162, 290
++};
++static const unsigned char extra_bits[36] = {
++ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8,
++ 9, 9, 10, 10, 11, 11, 12, 12, 13, 13, 14, 14, 15, 15, 16, 16
++};
++static const unsigned int position_base[290] = {
++ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512,
++ 768, 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576, 32768,
++ 49152, 65536, 98304, 131072, 196608, 262144, 393216, 524288, 655360,
++ 786432, 917504, 1048576, 1179648, 1310720, 1441792, 1572864, 1703936,
++ 1835008, 1966080, 2097152, 2228224, 2359296, 2490368, 2621440, 2752512,
++ 2883584, 3014656, 3145728, 3276800, 3407872, 3538944, 3670016, 3801088,
++ 3932160, 4063232, 4194304, 4325376, 4456448, 4587520, 4718592, 4849664,
++ 4980736, 5111808, 5242880, 5373952, 5505024, 5636096, 5767168, 5898240,
++ 6029312, 6160384, 6291456, 6422528, 6553600, 6684672, 6815744, 6946816,
++ 7077888, 7208960, 7340032, 7471104, 7602176, 7733248, 7864320, 7995392,
++ 8126464, 8257536, 8388608, 8519680, 8650752, 8781824, 8912896, 9043968,
++ 9175040, 9306112, 9437184, 9568256, 9699328, 9830400, 9961472, 10092544,
++ 10223616, 10354688, 10485760, 10616832, 10747904, 10878976, 11010048,
++ 11141120, 11272192, 11403264, 11534336, 11665408, 11796480, 11927552,
++ 12058624, 12189696, 12320768, 12451840, 12582912, 12713984, 12845056,
++ 12976128, 13107200, 13238272, 13369344, 13500416, 13631488, 13762560,
++ 13893632, 14024704, 14155776, 14286848, 14417920, 14548992, 14680064,
++ 14811136, 14942208, 15073280, 15204352, 15335424, 15466496, 15597568,
++ 15728640, 15859712, 15990784, 16121856, 16252928, 16384000, 16515072,
++ 16646144, 16777216, 16908288, 17039360, 17170432, 17301504, 17432576,
++ 17563648, 17694720, 17825792, 17956864, 18087936, 18219008, 18350080,
++ 18481152, 18612224, 18743296, 18874368, 19005440, 19136512, 19267584,
++ 19398656, 19529728, 19660800, 19791872, 19922944, 20054016, 20185088,
++ 20316160, 20447232, 20578304, 20709376, 20840448, 20971520, 21102592,
++ 21233664, 21364736, 21495808, 21626880, 21757952, 21889024, 22020096,
++ 22151168, 22282240, 22413312, 22544384, 22675456, 22806528, 22937600,
++ 23068672, 23199744, 23330816, 23461888, 23592960, 23724032, 23855104,
++ 23986176, 24117248, 24248320, 24379392, 24510464, 24641536, 24772608,
++ 24903680, 25034752, 25165824, 25296896, 25427968, 25559040, 25690112,
++ 25821184, 25952256, 26083328, 26214400, 26345472, 26476544, 26607616,
++ 26738688, 26869760, 27000832, 27131904, 27262976, 27394048, 27525120,
++ 27656192, 27787264, 27918336, 28049408, 28180480, 28311552, 28442624,
++ 28573696, 28704768, 28835840, 28966912, 29097984, 29229056, 29360128,
++ 29491200, 29622272, 29753344, 29884416, 30015488, 30146560, 30277632,
++ 30408704, 30539776, 30670848, 30801920, 30932992, 31064064, 31195136,
++ 31326208, 31457280, 31588352, 31719424, 31850496, 31981568, 32112640,
++ 32243712, 32374784, 32505856, 32636928, 32768000, 32899072, 33030144,
++ 33161216, 33292288, 33423360
++};
++
++static void lzxd_reset_state(struct lzxd_stream *lzx) {
++ int i;
++
++ lzx->R0 = 1;
++ lzx->R1 = 1;
++ lzx->R2 = 1;
++ lzx->header_read = 0;
++ lzx->block_remaining = 0;
++ lzx->block_type = LZX_BLOCKTYPE_INVALID;
++
++ /* initialise tables to 0 (because deltas will be applied to them) */
++ for (i = 0; i < LZX_MAINTREE_MAXSYMBOLS; i++) lzx->MAINTREE_len[i] = 0;
++ for (i = 0; i < LZX_LENGTH_MAXSYMBOLS; i++) lzx->LENGTH_len[i] = 0;
++}
++
++/*-------- main LZX code --------*/
++
++struct lzxd_stream *lzxd_init(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int window_bits,
++ int reset_interval,
++ int input_buffer_size,
++ off_t output_length,
++ char is_delta)
++{
++ unsigned int window_size = 1 << window_bits;
++ struct lzxd_stream *lzx;
++
++ if (!system) return NULL;
++
++ /* LZX DELTA window sizes are between 2^17 (128KiB) and 2^25 (32MiB),
++ * regular LZX windows are between 2^15 (32KiB) and 2^21 (2MiB)
++ */
++ if (is_delta) {
++ if (window_bits < 17 || window_bits > 25) return NULL;
++ }
++ else {
++ if (window_bits < 15 || window_bits > 21) return NULL;
++ }
++
++ input_buffer_size = (input_buffer_size + 1) & -2;
++ if (!input_buffer_size) return NULL;
++
++ /* allocate decompression state */
++ if (!(lzx = (struct lzxd_stream *) system->alloc(system, sizeof(struct lzxd_stream)))) {
++ return NULL;
++ }
++
++ /* allocate decompression window and input buffer */
++ lzx->window = (unsigned char *) system->alloc(system, (size_t) window_size);
++ lzx->inbuf = (unsigned char *) system->alloc(system, (size_t) input_buffer_size);
++ if (!lzx->window || !lzx->inbuf) {
++ system->free(lzx->window);
++ system->free(lzx->inbuf);
++ system->free(lzx);
++ return NULL;
++ }
++
++ /* initialise decompression state */
++ lzx->sys = system;
++ lzx->input = input;
++ lzx->output = output;
++ lzx->offset = 0;
++ lzx->length = output_length;
++
++ lzx->inbuf_size = input_buffer_size;
++ lzx->window_size = 1 << window_bits;
++ lzx->ref_data_size = 0;
++ lzx->window_posn = 0;
++ lzx->frame_posn = 0;
++ lzx->frame = 0;
++ lzx->reset_interval = reset_interval;
++ lzx->intel_filesize = 0;
++ lzx->intel_curpos = 0;
++ lzx->intel_started = 0;
++ lzx->error = MSPACK_ERR_OK;
++ lzx->num_offsets = position_slots[window_bits - 15] << 3;
++ lzx->is_delta = is_delta;
++
++ lzx->o_ptr = lzx->o_end = &lzx->e8_buf[0];
++ lzxd_reset_state(lzx);
++ INIT_BITS;
++ return lzx;
++}
++
++int lzxd_set_reference_data(struct lzxd_stream *lzx,
++ struct mspack_system *system,
++ struct mspack_file *input,
++ unsigned int length)
++{
++ if (!lzx) return MSPACK_ERR_ARGS;
++
++ if (!lzx->is_delta) {
++ D(("only LZX DELTA streams support reference data"))
++ return MSPACK_ERR_ARGS;
++ }
++ if (lzx->offset) {
++ D(("too late to set reference data after decoding starts"))
++ return MSPACK_ERR_ARGS;
++ }
++ if (length > lzx->window_size) {
++ D(("reference length (%u) is longer than the window", length))
++ return MSPACK_ERR_ARGS;
++ }
++ if (length > 0 && (!system || !input)) {
++ D(("length > 0 but no system or input"))
++ return MSPACK_ERR_ARGS;
++ }
++
++ lzx->ref_data_size = length;
++ if (length > 0) {
++ /* copy reference data */
++ unsigned char *pos = &lzx->window[lzx->window_size - length];
++ int bytes = system->read(input, pos, length);
++ /* length can't be more than 2^25, so no signedness problem */
++ if (bytes < (int)length) return MSPACK_ERR_READ;
++ }
++ lzx->ref_data_size = length;
++ return MSPACK_ERR_OK;
++}
++
++void lzxd_set_output_length(struct lzxd_stream *lzx, off_t out_bytes) {
++ if (lzx) lzx->length = out_bytes;
++}
++
++int lzxd_decompress(struct lzxd_stream *lzx, off_t out_bytes) {
++ /* bitstream and huffman reading variables */
++ register unsigned int bit_buffer;
++ register int bits_left, i=0;
++ unsigned char *i_ptr, *i_end;
++ register unsigned short sym;
++
++ int match_length, length_footer, extra, verbatim_bits, bytes_todo;
++ int this_run, main_element, aligned_bits, j;
++ unsigned char *window, *runsrc, *rundest, buf[12];
++ unsigned int frame_size=0, end_frame, match_offset, window_posn;
++ unsigned int R0, R1, R2;
++
++ /* easy answers */
++ if (!lzx || (out_bytes < 0)) return MSPACK_ERR_ARGS;
++ if (lzx->error) return lzx->error;
++
++ /* flush out any stored-up bytes before we begin */
++ i = lzx->o_end - lzx->o_ptr;
++ if ((off_t) i > out_bytes) i = (int) out_bytes;
++ if (i) {
++ if (lzx->sys->write(lzx->output, lzx->o_ptr, i) != i) {
++ return lzx->error = MSPACK_ERR_WRITE;
++ }
++ lzx->o_ptr += i;
++ lzx->offset += i;
++ out_bytes -= i;
++ }
++ if (out_bytes == 0) return MSPACK_ERR_OK;
++
++ /* restore local state */
++ RESTORE_BITS;
++ window = lzx->window;
++ window_posn = lzx->window_posn;
++ R0 = lzx->R0;
++ R1 = lzx->R1;
++ R2 = lzx->R2;
++
++ end_frame = (unsigned int)((lzx->offset + out_bytes) / LZX_FRAME_SIZE) + 1;
++
++ while (lzx->frame < end_frame) {
++ /* have we reached the reset interval? (if there is one?) */
++ if (lzx->reset_interval && ((lzx->frame % lzx->reset_interval) == 0)) {
++ if (lzx->block_remaining) {
++ D(("%d bytes remaining at reset interval", lzx->block_remaining))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* re-read the intel header and reset the huffman lengths */
++ lzxd_reset_state(lzx);
++ R0 = lzx->R0;
++ R1 = lzx->R1;
++ R2 = lzx->R2;
++ }
++
++ /* LZX DELTA format has chunk_size, not present in LZX format */
++ if (lzx->is_delta) {
++ ENSURE_BITS(16);
++ REMOVE_BITS(16);
++ }
++
++ /* read header if necessary */
++ if (!lzx->header_read) {
++ /* read 1 bit. if bit=0, intel filesize = 0.
++ * if bit=1, read intel filesize (32 bits) */
++ j = 0; READ_BITS(i, 1); if (i) { READ_BITS(i, 16); READ_BITS(j, 16); }
++ lzx->intel_filesize = (i << 16) | j;
++ lzx->header_read = 1;
++ }
++
++ /* calculate size of frame: all frames are 32k except the final frame
++ * which is 32kb or less. this can only be calculated when lzx->length
++ * has been filled in. */
++ frame_size = LZX_FRAME_SIZE;
++ if (lzx->length && (lzx->length - lzx->offset) < (off_t)frame_size) {
++ frame_size = lzx->length - lzx->offset;
++ }
++
++ /* decode until one more frame is available */
++ bytes_todo = lzx->frame_posn + frame_size - window_posn;
++ while (bytes_todo > 0) {
++ /* initialise new block, if one is needed */
++ if (lzx->block_remaining == 0) {
++ /* realign if previous block was an odd-sized UNCOMPRESSED block */
++ if ((lzx->block_type == LZX_BLOCKTYPE_UNCOMPRESSED) &&
++ (lzx->block_length & 1))
++ {
++ READ_IF_NEEDED;
++ i_ptr++;
++ }
++
++ /* read block type (3 bits) and block length (24 bits) */
++ READ_BITS(lzx->block_type, 3);
++ READ_BITS(i, 16); READ_BITS(j, 8);
++ lzx->block_remaining = lzx->block_length = (i << 8) | j;
++ /*D(("new block t%d len %u", lzx->block_type, lzx->block_length))*/
++
++ /* read individual block headers */
++ switch (lzx->block_type) {
++ case LZX_BLOCKTYPE_ALIGNED:
++ /* read lengths of and build aligned huffman decoding tree */
++ for (i = 0; i < 8; i++) { READ_BITS(j, 3); lzx->ALIGNED_len[i] = j; }
++ BUILD_TABLE(ALIGNED);
++ /* no break -- rest of aligned header is same as verbatim */
++ case LZX_BLOCKTYPE_VERBATIM:
++ /* read lengths of and build main huffman decoding tree */
++ READ_LENGTHS(MAINTREE, 0, 256);
++ READ_LENGTHS(MAINTREE, 256, LZX_NUM_CHARS + lzx->num_offsets);
++ BUILD_TABLE(MAINTREE);
++ /* if the literal 0xE8 is anywhere in the block... */
++ if (lzx->MAINTREE_len[0xE8] != 0) lzx->intel_started = 1;
++ /* read lengths of and build lengths huffman decoding tree */
++ READ_LENGTHS(LENGTH, 0, LZX_NUM_SECONDARY_LENGTHS);
++ BUILD_TABLE_MAYBE_EMPTY(LENGTH);
++ break;
++
++ case LZX_BLOCKTYPE_UNCOMPRESSED:
++ /* because we can't assume otherwise */
++ lzx->intel_started = 1;
++
++ /* read 1-16 (not 0-15) bits to align to bytes */
++ ENSURE_BITS(16);
++ if (bits_left > 16) i_ptr -= 2;
++ bits_left = 0; bit_buffer = 0;
++
++ /* read 12 bytes of stored R0 / R1 / R2 values */
++ for (rundest = &buf[0], i = 0; i < 12; i++) {
++ READ_IF_NEEDED;
++ *rundest++ = *i_ptr++;
++ }
++ R0 = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
++ R1 = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
++ R2 = buf[8] | (buf[9] << 8) | (buf[10] << 16) | (buf[11] << 24);
++ break;
++
++ default:
++ D(("bad block type"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ }
++
++ /* decode more of the block:
++ * run = min(what's available, what's needed) */
++ this_run = lzx->block_remaining;
++ if (this_run > bytes_todo) this_run = bytes_todo;
++
++ /* assume we decode exactly this_run bytes, for now */
++ bytes_todo -= this_run;
++ lzx->block_remaining -= this_run;
++
++ /* decode at least this_run bytes */
++ switch (lzx->block_type) {
++ case LZX_BLOCKTYPE_VERBATIM:
++ while (this_run > 0) {
++ READ_HUFFSYM(MAINTREE, main_element);
++ if (main_element < LZX_NUM_CHARS) {
++ /* literal: 0 to LZX_NUM_CHARS-1 */
++ window[window_posn++] = main_element;
++ this_run--;
++ }
++ else {
++ /* match: LZX_NUM_CHARS + ((slot<<3) | length_header (3 bits)) */
++ main_element -= LZX_NUM_CHARS;
++
++ /* get match length */
++ match_length = main_element & LZX_NUM_PRIMARY_LENGTHS;
++ if (match_length == LZX_NUM_PRIMARY_LENGTHS) {
++ if (lzx->LENGTH_empty) {
++ D(("LENGTH symbol needed but tree is empty"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ READ_HUFFSYM(LENGTH, length_footer);
++ match_length += length_footer;
++ }
++ match_length += LZX_MIN_MATCH;
++
++ /* get match offset */
++ switch ((match_offset = (main_element >> 3))) {
++ case 0: match_offset = R0; break;
++ case 1: match_offset = R1; R1=R0; R0 = match_offset; break;
++ case 2: match_offset = R2; R2=R0; R0 = match_offset; break;
++ case 3: match_offset = 1; R2=R1; R1=R0; R0 = match_offset; break;
++ default:
++ extra = (match_offset >= 36) ? 17 : extra_bits[match_offset];
++ READ_BITS(verbatim_bits, extra);
++ match_offset = position_base[match_offset] - 2 + verbatim_bits;
++ R2 = R1; R1 = R0; R0 = match_offset;
++ }
++
++ /* LZX DELTA uses max match length to signal even longer match */
++ if (match_length == LZX_MAX_MATCH && lzx->is_delta) {
++ int extra_len = 0;
++ ENSURE_BITS(3); /* 4 entry huffman tree */
++ if (PEEK_BITS(1) == 0) {
++ REMOVE_BITS(1); /* '0' -> 8 extra length bits */
++ READ_BITS(extra_len, 8);
++ }
++ else if (PEEK_BITS(2) == 2) {
++ REMOVE_BITS(2); /* '10' -> 10 extra length bits + 0x100 */
++ READ_BITS(extra_len, 10);
++ extra_len += 0x100;
++ }
++ else if (PEEK_BITS(3) == 6) {
++ REMOVE_BITS(3); /* '110' -> 12 extra length bits + 0x500 */
++ READ_BITS(extra_len, 12);
++ extra_len += 0x500;
++ }
++ else {
++ REMOVE_BITS(3); /* '111' -> 15 extra length bits */
++ READ_BITS(extra_len, 15);
++ }
++ match_length += extra_len;
++ }
++
++ if ((window_posn + match_length) > lzx->window_size) {
++ D(("match ran over window wrap"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* copy match */
++ rundest = &window[window_posn];
++ i = match_length;
++ /* does match offset wrap the window? */
++ if (match_offset > window_posn) {
++ if (match_offset > lzx->offset &&
++ (match_offset - window_posn) > lzx->ref_data_size)
++ {
++ D(("match offset beyond LZX stream"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ /* j = length from match offset to end of window */
++ j = match_offset - window_posn;
++ if (j > (int) lzx->window_size) {
++ D(("match offset beyond window boundaries"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ runsrc = &window[lzx->window_size - j];
++ if (j < i) {
++ /* if match goes over the window edge, do two copy runs */
++ i -= j; while (j-- > 0) *rundest++ = *runsrc++;
++ runsrc = window;
++ }
++ while (i-- > 0) *rundest++ = *runsrc++;
++ }
++ else {
++ runsrc = rundest - match_offset;
++ while (i-- > 0) *rundest++ = *runsrc++;
++ }
++
++ this_run -= match_length;
++ window_posn += match_length;
++ }
++ } /* while (this_run > 0) */
++ break;
++
++ case LZX_BLOCKTYPE_ALIGNED:
++ while (this_run > 0) {
++ READ_HUFFSYM(MAINTREE, main_element);
++ if (main_element < LZX_NUM_CHARS) {
++ /* literal: 0 to LZX_NUM_CHARS-1 */
++ window[window_posn++] = main_element;
++ this_run--;
++ }
++ else {
++ /* match: LZX_NUM_CHARS + ((slot<<3) | length_header (3 bits)) */
++ main_element -= LZX_NUM_CHARS;
++
++ /* get match length */
++ match_length = main_element & LZX_NUM_PRIMARY_LENGTHS;
++ if (match_length == LZX_NUM_PRIMARY_LENGTHS) {
++ if (lzx->LENGTH_empty) {
++ D(("LENGTH symbol needed but tree is empty"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ READ_HUFFSYM(LENGTH, length_footer);
++ match_length += length_footer;
++ }
++ match_length += LZX_MIN_MATCH;
++
++ /* get match offset */
++ switch ((match_offset = (main_element >> 3))) {
++ case 0: match_offset = R0; break;
++ case 1: match_offset = R1; R1 = R0; R0 = match_offset; break;
++ case 2: match_offset = R2; R2 = R0; R0 = match_offset; break;
++ default:
++ extra = (match_offset >= 36) ? 17 : extra_bits[match_offset];
++ match_offset = position_base[match_offset] - 2;
++ if (extra > 3) {
++ /* verbatim and aligned bits */
++ extra -= 3;
++ READ_BITS(verbatim_bits, extra);
++ match_offset += (verbatim_bits << 3);
++ READ_HUFFSYM(ALIGNED, aligned_bits);
++ match_offset += aligned_bits;
++ }
++ else if (extra == 3) {
++ /* aligned bits only */
++ READ_HUFFSYM(ALIGNED, aligned_bits);
++ match_offset += aligned_bits;
++ }
++ else if (extra > 0) { /* extra==1, extra==2 */
++ /* verbatim bits only */
++ READ_BITS(verbatim_bits, extra);
++ match_offset += verbatim_bits;
++ }
++ else /* extra == 0 */ {
++ /* ??? not defined in LZX specification! */
++ match_offset = 1;
++ }
++ /* update repeated offset LRU queue */
++ R2 = R1; R1 = R0; R0 = match_offset;
++ }
++
++ /* LZX DELTA uses max match length to signal even longer match */
++ if (match_length == LZX_MAX_MATCH && lzx->is_delta) {
++ int extra_len = 0;
++ ENSURE_BITS(3); /* 4 entry huffman tree */
++ if (PEEK_BITS(1) == 0) {
++ REMOVE_BITS(1); /* '0' -> 8 extra length bits */
++ READ_BITS(extra_len, 8);
++ }
++ else if (PEEK_BITS(2) == 2) {
++ REMOVE_BITS(2); /* '10' -> 10 extra length bits + 0x100 */
++ READ_BITS(extra_len, 10);
++ extra_len += 0x100;
++ }
++ else if (PEEK_BITS(3) == 6) {
++ REMOVE_BITS(3); /* '110' -> 12 extra length bits + 0x500 */
++ READ_BITS(extra_len, 12);
++ extra_len += 0x500;
++ }
++ else {
++ REMOVE_BITS(3); /* '111' -> 15 extra length bits */
++ READ_BITS(extra_len, 15);
++ }
++ match_length += extra_len;
++ }
++
++ if ((window_posn + match_length) > lzx->window_size) {
++ D(("match ran over window wrap"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* copy match */
++ rundest = &window[window_posn];
++ i = match_length;
++ /* does match offset wrap the window? */
++ if (match_offset > window_posn) {
++ if (match_offset > lzx->offset &&
++ (match_offset - window_posn) > lzx->ref_data_size)
++ {
++ D(("match offset beyond LZX stream"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ /* j = length from match offset to end of window */
++ j = match_offset - window_posn;
++ if (j > (int) lzx->window_size) {
++ D(("match offset beyond window boundaries"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ runsrc = &window[lzx->window_size - j];
++ if (j < i) {
++ /* if match goes over the window edge, do two copy runs */
++ i -= j; while (j-- > 0) *rundest++ = *runsrc++;
++ runsrc = window;
++ }
++ while (i-- > 0) *rundest++ = *runsrc++;
++ }
++ else {
++ runsrc = rundest - match_offset;
++ while (i-- > 0) *rundest++ = *runsrc++;
++ }
++
++ this_run -= match_length;
++ window_posn += match_length;
++ }
++ } /* while (this_run > 0) */
++ break;
++
++ case LZX_BLOCKTYPE_UNCOMPRESSED:
++ /* as this_run is limited not to wrap a frame, this also means it
++ * won't wrap the window (as the window is a multiple of 32k) */
++ rundest = &window[window_posn];
++ window_posn += this_run;
++ while (this_run > 0) {
++ if ((i = i_end - i_ptr) == 0) {
++ READ_IF_NEEDED;
++ }
++ else {
++ if (i > this_run) i = this_run;
++ lzx->sys->copy(i_ptr, rundest, (size_t) i);
++ rundest += i;
++ i_ptr += i;
++ this_run -= i;
++ }
++ }
++ break;
++
++ default:
++ return lzx->error = MSPACK_ERR_DECRUNCH; /* might as well */
++ }
++
++ /* did the final match overrun our desired this_run length? */
++ if (this_run < 0) {
++ if ((unsigned int)(-this_run) > lzx->block_remaining) {
++ D(("overrun went past end of block by %d (%d remaining)",
++ -this_run, lzx->block_remaining ))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++ lzx->block_remaining -= -this_run;
++ }
++ } /* while (bytes_todo > 0) */
++
++ /* streams don't extend over frame boundaries */
++ if ((window_posn - lzx->frame_posn) != frame_size) {
++ D(("decode beyond output frame limits! %d != %d",
++ window_posn - lzx->frame_posn, frame_size))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* re-align input bitstream */
++ if (bits_left > 0) ENSURE_BITS(16);
++ if (bits_left & 15) REMOVE_BITS(bits_left & 15);
++
++ /* check that we've used all of the previous frame first */
++ if (lzx->o_ptr != lzx->o_end) {
++ D(("%ld avail bytes, new %d frame", lzx->o_end-lzx->o_ptr, frame_size))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* does this intel block _really_ need decoding? */
++ if (lzx->intel_started && lzx->intel_filesize &&
++ (lzx->frame <= 32768) && (frame_size > 10))
++ {
++ unsigned char *data = &lzx->e8_buf[0];
++ unsigned char *dataend = &lzx->e8_buf[frame_size - 10];
++ signed int curpos = lzx->intel_curpos;
++ signed int filesize = lzx->intel_filesize;
++ signed int abs_off, rel_off;
++
++ /* copy e8 block to the e8 buffer and tweak if needed */
++ lzx->o_ptr = data;
++ lzx->sys->copy(&lzx->window[lzx->frame_posn], data, frame_size);
++
++ while (data < dataend) {
++ if (*data++ != 0xE8) { curpos++; continue; }
++ abs_off = data[0] | (data[1]<<8) | (data[2]<<16) | (data[3]<<24);
++ if ((abs_off >= -curpos) && (abs_off < filesize)) {
++ rel_off = (abs_off >= 0) ? abs_off - curpos : abs_off + filesize;
++ data[0] = (unsigned char) rel_off;
++ data[1] = (unsigned char) (rel_off >> 8);
++ data[2] = (unsigned char) (rel_off >> 16);
++ data[3] = (unsigned char) (rel_off >> 24);
++ }
++ data += 4;
++ curpos += 5;
++ }
++ lzx->intel_curpos += frame_size;
++ }
++ else {
++ lzx->o_ptr = &lzx->window[lzx->frame_posn];
++ if (lzx->intel_filesize) lzx->intel_curpos += frame_size;
++ }
++ lzx->o_end = &lzx->o_ptr[frame_size];
++
++ /* write a frame */
++ i = (out_bytes < (off_t)frame_size) ? (unsigned int)out_bytes : frame_size;
++ if (lzx->sys->write(lzx->output, lzx->o_ptr, i) != i) {
++ return lzx->error = MSPACK_ERR_WRITE;
++ }
++ lzx->o_ptr += i;
++ lzx->offset += i;
++ out_bytes -= i;
++
++ /* advance frame start position */
++ lzx->frame_posn += frame_size;
++ lzx->frame++;
++
++ /* wrap window / frame position pointers */
++ if (window_posn == lzx->window_size) window_posn = 0;
++ if (lzx->frame_posn == lzx->window_size) lzx->frame_posn = 0;
++
++ } /* while (lzx->frame < end_frame) */
++
++ if (out_bytes) {
++ D(("bytes left to output"))
++ return lzx->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* store local state */
++ STORE_BITS;
++ lzx->window_posn = window_posn;
++ lzx->R0 = R0;
++ lzx->R1 = R1;
++ lzx->R2 = R2;
++
++ return MSPACK_ERR_OK;
++}
++
++void lzxd_free(struct lzxd_stream *lzx) {
++ struct mspack_system *sys;
++ if (lzx) {
++ sys = lzx->sys;
++ sys->free(lzx->inbuf);
++ sys->free(lzx->window);
++ sys->free(lzx);
++ }
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/mspack.h b/libclamav/libmspack-0.4alpha/mspack/mspack.h
+new file mode 100755
+index 000000000000..9d05e23fec35
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/mspack.h
+@@ -0,0 +1,2353 @@
++/* libmspack -- a library for working with Microsoft compression formats.
++ * (C) 2003-2013 Stuart Caie <kyzer at 4u.net>
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU Lesser General Public License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++/** \mainpage
++ *
++ * \section intro Introduction
++ *
++ * libmspack is a library which provides compressors and decompressors,
++ * archivers and dearchivers for Microsoft compression formats.
++ *
++ * \section formats Formats supported
++ *
++ * The following file formats are supported:
++ * - SZDD files, which use LZSS compression
++ * - KWAJ files, which use LZSS, LZSS+Huffman or deflate compression
++ * - .HLP (MS Help) files, which use LZSS compression
++ * - .CAB (MS Cabinet) files, which use deflate, LZX or Quantum compression
++ * - .CHM (HTML Help) files, which use LZX compression
++ * - .LIT (MS EBook) files, which use LZX compression and DES encryption
++ * - .LZX (Exchange Offline Addressbook) files, which use LZX compression
++ *
++ * To determine the capabilities of the library, and the binary
++ * compatibility version of any particular compressor or decompressor, use
++ * the mspack_version() function. The UNIX library interface version is
++ * defined as the highest-versioned library component.
++ *
++ * \section starting Getting started
++ *
++ * The macro MSPACK_SYS_SELFTEST() should be used to ensure the library can
++ * be used. In particular, it checks if the caller is using 32-bit file I/O
++ * when the library is compiled for 64-bit file I/O and vice versa.
++ *
++ * If compiled normally, the library includes basic file I/O and memory
++ * management functionality using the standard C library. This can be
++ * customised and replaced entirely by creating a mspack_system structure.
++ *
++ * A compressor or decompressor for the required format must be
++ * instantiated before it can be used. Each construction function takes
++ * one parameter, which is either a pointer to a custom mspack_system
++ * structure, or NULL to use the default. The instantiation returned, if
++ * not NULL, contains function pointers (methods) to work with the given
++ * file format.
++ *
++ * For compression:
++ * - mspack_create_cab_compressor() creates a mscab_compressor
++ * - mspack_create_chm_compressor() creates a mschm_compressor
++ * - mspack_create_lit_compressor() creates a mslit_compressor
++ * - mspack_create_hlp_compressor() creates a mshlp_compressor
++ * - mspack_create_szdd_compressor() creates a msszdd_compressor
++ * - mspack_create_kwaj_compressor() creates a mskwaj_compressor
++ * - mspack_create_oab_compressor() creates a msoab_compressor
++ *
++ * For decompression:
++ * - mspack_create_cab_decompressor() creates a mscab_decompressor
++ * - mspack_create_chm_decompressor() creates a mschm_decompressor
++ * - mspack_create_lit_decompressor() creates a mslit_decompressor
++ * - mspack_create_hlp_decompressor() creates a mshlp_decompressor
++ * - mspack_create_szdd_decompressor() creates a msszdd_decompressor
++ * - mspack_create_kwaj_decompressor() creates a mskwaj_decompressor
++ * - mspack_create_oab_decompressor() creates a msoab_decompressor
++ *
++ * Once finished working with a format, each kind of
++ * compressor/decompressor has its own specific destructor:
++ * - mspack_destroy_cab_compressor()
++ * - mspack_destroy_cab_decompressor()
++ * - mspack_destroy_chm_compressor()
++ * - mspack_destroy_chm_decompressor()
++ * - mspack_destroy_lit_compressor()
++ * - mspack_destroy_lit_decompressor()
++ * - mspack_destroy_hlp_compressor()
++ * - mspack_destroy_hlp_decompressor()
++ * - mspack_destroy_szdd_compressor()
++ * - mspack_destroy_szdd_decompressor()
++ * - mspack_destroy_kwaj_compressor()
++ * - mspack_destroy_kwaj_decompressor()
++ * - mspack_destroy_oab_compressor()
++ * - mspack_destroy_oab_decompressor()
++ *
++ * Destroying a compressor or decompressor does not destroy any objects,
++ * structures or handles that have been created using that compressor or
++ * decompressor. Ensure that everything created or opened is destroyed or
++ * closed before compressor/decompressor is itself destroyed.
++ *
++ * \section errors Error codes
++ *
++ * All compressors and decompressors use the same set of error codes. Most
++ * methods return an error code directly. For methods which do not
++ * return error codes directly, the error code can be obtained with the
++ * last_error() method.
++ *
++ * - #MSPACK_ERR_OK is used to indicate success. This error code is defined
++ * as zero, all other code are non-zero.
++ * - #MSPACK_ERR_ARGS indicates that a method was called with inappropriate
++ * arguments.
++ * - #MSPACK_ERR_OPEN indicates that mspack_system::open() failed.
++ * - #MSPACK_ERR_READ indicates that mspack_system::read() failed.
++ * - #MSPACK_ERR_WRITE indicates that mspack_system::write() failed.
++ * - #MSPACK_ERR_SEEK indicates that mspack_system::seek() failed.
++ * - #MSPACK_ERR_NOMEMORY indicates that mspack_system::alloc() failed.
++ * - #MSPACK_ERR_SIGNATURE indicates that the file being read does not
++ * have the correct "signature". It is probably not a valid file for
++ * whatever format is being read.
++ * - #MSPACK_ERR_DATAFORMAT indicates that the file being used or read
++ * is corrupt.
++ * - #MSPACK_ERR_CHECKSUM indicates that a data checksum has failed.
++ * - #MSPACK_ERR_CRUNCH indicates an error occured during compression.
++ * - #MSPACK_ERR_DECRUNCH indicates an error occured during decompression.
++ *
++ * \section threading Multi-threading
++ *
++ * libmspack methods are reentrant and multithreading-safe when each
++ * thread has its own compressor or decompressor.
++
++ * You should not call multiple methods simultaneously on a single
++ * compressor or decompressor instance.
++ *
++ * If this may happen, you can either use one compressor or
++ * decompressor per thread, or you can use your preferred lock,
++ * semaphore or mutex library to ensure no more than one method on a
++ * compressor/decompressor is called simultaneously. libmspack will
++ * not do this locking for you.
++ *
++ * Example of incorrect behaviour:
++ * - thread 1 calls mspack_create_cab_decompressor()
++ * - thread 1 calls open()
++ * - thread 1 calls extract() for one file
++ * - thread 2 simultaneously calls extract() for another file
++ *
++ * Correct behaviour:
++ * - thread 1 calls mspack_create_cab_decompressor()
++ * - thread 2 calls mspack_create_cab_decompressor()
++ * - thread 1 calls its own open() / extract()
++ * - thread 2 simultaneously calls its own open() / extract()
++ *
++ * Also correct behaviour:
++ * - thread 1 calls mspack_create_cab_decompressor()
++ * - thread 1 locks a mutex for with the decompressor before
++ * calling any methods on it, and unlocks the mutex after each
++ * method returns.
++ * - thread 1 can share the results of open() with thread 2, and both
++ * can call extract(), provided they both guard against simultaneous
++ * use of extract(), and any other methods, with the mutex
++ */
++
++#ifndef LIB_MSPACK_H
++#define LIB_MSPACK_H 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include <sys/types.h>
++#include <stdlib.h>
++
++/**
++ * System self-test function, to ensure both library and calling program
++ * can use one another.
++ *
++ * A result of MSPACK_ERR_OK means the library and caller are
++ * compatible. Any other result indicates that the library and caller are
++ * not compatible and should not be used. In particular, a value of
++ * MSPACK_ERR_SEEK means the library and caller use different off_t
++ * datatypes.
++ *
++ * It should be used like so:
++ *
++ * @code
++ * int selftest_result;
++ * MSPACK_SYS_SELFTEST(selftest_result);
++ * if (selftest_result != MSPACK_ERR_OK) {
++ * fprintf(stderr, "incompatible with this build of libmspack\n");
++ * exit(0);
++ * }
++ * @endcode
++ *
++ * @param result an int variable to store the result of the self-test
++ */
++#define MSPACK_SYS_SELFTEST(result) do { \
++ (result) = mspack_sys_selftest_internal(sizeof(off_t)); \
++} while (0)
++
++/** Part of the MSPACK_SYS_SELFTEST() macro, must not be used directly. */
++extern int mspack_sys_selftest_internal(int);
++
++/**
++ * Enquire about the binary compatibility version of a specific interface in
++ * the library. Currently, the following interfaces are defined:
++ *
++ * - #MSPACK_VER_LIBRARY: the overall library
++ * - #MSPACK_VER_SYSTEM: the mspack_system interface
++ * - #MSPACK_VER_MSCABD: the mscab_decompressor interface
++ * - #MSPACK_VER_MSCABC: the mscab_compressor interface
++ * - #MSPACK_VER_MSCHMD: the mschm_decompressor interface
++ * - #MSPACK_VER_MSCHMC: the mschm_compressor interface
++ * - #MSPACK_VER_MSLITD: the mslit_decompressor interface
++ * - #MSPACK_VER_MSLITC: the mslit_compressor interface
++ * - #MSPACK_VER_MSHLPD: the mshlp_decompressor interface
++ * - #MSPACK_VER_MSHLPC: the mshlp_compressor interface
++ * - #MSPACK_VER_MSSZDDD: the msszdd_decompressor interface
++ * - #MSPACK_VER_MSSZDDC: the msszdd_compressor interface
++ * - #MSPACK_VER_MSKWAJD: the mskwaj_decompressor interface
++ * - #MSPACK_VER_MSKWAJC: the mskwaj_compressor interface
++ * - #MSPACK_VER_MSOABD: the msoab_decompressor interface
++ * - #MSPACK_VER_MSOABC: the msoab_compressor interface
++ *
++ * The result of the function should be interpreted as follows:
++ * - -1: this interface is completely unknown to the library
++ * - 0: this interface is known, but non-functioning
++ * - 1: this interface has all basic functionality
++ * - 2, 3, ...: this interface has additional functionality, clearly marked
++ * in the documentation as "version 2", "version 3" and so on.
++ *
++ * @param entity the interface to request current version of
++ * @return the version of the requested interface
++ */
++extern int mspack_version(int entity);
++
++/** Pass to mspack_version() to get the overall library version */
++#define MSPACK_VER_LIBRARY (0)
++/** Pass to mspack_version() to get the mspack_system version */
++#define MSPACK_VER_SYSTEM (1)
++/** Pass to mspack_version() to get the mscab_decompressor version */
++#define MSPACK_VER_MSCABD (2)
++/** Pass to mspack_version() to get the mscab_compressor version */
++#define MSPACK_VER_MSCABC (3)
++/** Pass to mspack_version() to get the mschm_decompressor version */
++#define MSPACK_VER_MSCHMD (4)
++/** Pass to mspack_version() to get the mschm_compressor version */
++#define MSPACK_VER_MSCHMC (5)
++/** Pass to mspack_version() to get the mslit_decompressor version */
++#define MSPACK_VER_MSLITD (6)
++/** Pass to mspack_version() to get the mslit_compressor version */
++#define MSPACK_VER_MSLITC (7)
++/** Pass to mspack_version() to get the mshlp_decompressor version */
++#define MSPACK_VER_MSHLPD (8)
++/** Pass to mspack_version() to get the mshlp_compressor version */
++#define MSPACK_VER_MSHLPC (9)
++/** Pass to mspack_version() to get the msszdd_decompressor version */
++#define MSPACK_VER_MSSZDDD (10)
++/** Pass to mspack_version() to get the msszdd_compressor version */
++#define MSPACK_VER_MSSZDDC (11)
++/** Pass to mspack_version() to get the mskwaj_decompressor version */
++#define MSPACK_VER_MSKWAJD (12)
++/** Pass to mspack_version() to get the mskwaj_compressor version */
++#define MSPACK_VER_MSKWAJC (13)
++/** Pass to mspack_version() to get the msoab_decompressor version */
++#define MSPACK_VER_MSOABD (14)
++/** Pass to mspack_version() to get the msoab_compressor version */
++#define MSPACK_VER_MSOABC (15)
++
++/* --- file I/O abstraction ------------------------------------------------ */
++
++/**
++ * A structure which abstracts file I/O and memory management.
++ *
++ * The library always uses the mspack_system structure for interaction
++ * with the file system and to allocate, free and copy all memory. It also
++ * uses it to send literal messages to the library user.
++ *
++ * When the library is compiled normally, passing NULL to a compressor or
++ * decompressor constructor will result in a default mspack_system being
++ * used, where all methods are implemented with the standard C library.
++ * However, all constructors support being given a custom created
++ * mspack_system structure, with the library user's own methods. This
++ * allows for more abstract interaction, such as reading and writing files
++ * directly to memory, or from a network socket or pipe.
++ *
++ * Implementors of an mspack_system structure should read all
++ * documentation entries for every structure member, and write methods
++ * which conform to those standards.
++ */
++struct mspack_system {
++ /**
++ * Opens a file for reading, writing, appending or updating.
++ *
++ * @param self a self-referential pointer to the mspack_system
++ * structure whose open() method is being called. If
++ * this pointer is required by close(), read(), write(),
++ * seek() or tell(), it should be stored in the result
++ * structure at this time.
++ * @param filename the file to be opened. It is passed directly from the
++ * library caller without being modified, so it is up to
++ * the caller what this parameter actually represents.
++ * @param mode one of #MSPACK_SYS_OPEN_READ (open an existing file
++ * for reading), #MSPACK_SYS_OPEN_WRITE (open a new file
++ * for writing), #MSPACK_SYS_OPEN_UPDATE (open an existing
++ * file for reading/writing from the start of the file) or
++ * #MSPACK_SYS_OPEN_APPEND (open an existing file for
++ * reading/writing from the end of the file)
++ * @return a pointer to a mspack_file structure. This structure officially
++ * contains no members, its true contents are up to the
++ * mspack_system implementor. It should contain whatever is needed
++ * for other mspack_system methods to operate. Returning the NULL
++ * pointer indicates an error condition.
++ * @see close(), read(), write(), seek(), tell(), message()
++ */
++ struct mspack_file * (*open)(struct mspack_system *self,
++ const char *filename,
++ int mode);
++
++ /**
++ * Closes a previously opened file. If any memory was allocated for this
++ * particular file handle, it should be freed at this time.
++ *
++ * @param file the file to close
++ * @see open()
++ */
++ void (*close)(struct mspack_file *file);
++
++ /**
++ * Reads a given number of bytes from an open file.
++ *
++ * @param file the file to read from
++ * @param buffer the location where the read bytes should be stored
++ * @param bytes the number of bytes to read from the file.
++ * @return the number of bytes successfully read (this can be less than
++ * the number requested), zero to mark the end of file, or less
++ * than zero to indicate an error.
++ * @see open(), write()
++ */
++ int (*read)(struct mspack_file *file,
++ void *buffer,
++ int bytes);
++
++ /**
++ * Writes a given number of bytes to an open file.
++ *
++ * @param file the file to write to
++ * @param buffer the location where the written bytes should be read from
++ * @param bytes the number of bytes to write to the file.
++ * @return the number of bytes successfully written, this can be less
++ * than the number requested. Zero or less can indicate an error
++ * where no bytes at all could be written. All cases where less
++ * bytes were written than requested are considered by the library
++ * to be an error.
++ * @see open(), read()
++ */
++ int (*write)(struct mspack_file *file,
++ void *buffer,
++ int bytes);
++
++ /**
++ * Seeks to a specific file offset within an open file.
++ *
++ * Sometimes the library needs to know the length of a file. It does
++ * this by seeking to the end of the file with seek(file, 0,
++ * MSPACK_SYS_SEEK_END), then calling tell(). Implementations may want
++ * to make a special case for this.
++ *
++ * Due to the potentially varying 32/64 bit datatype off_t on some
++ * architectures, the #MSPACK_SYS_SELFTEST macro MUST be used before
++ * using the library. If not, the error caused by the library passing an
++ * inappropriate stackframe to seek() is subtle and hard to trace.
++ *
++ * @param file the file to be seeked
++ * @param offset an offset to seek, measured in bytes
++ * @param mode one of #MSPACK_SYS_SEEK_START (the offset should be
++ * measured from the start of the file), #MSPACK_SYS_SEEK_CUR
++ * (the offset should be measured from the current file offset)
++ * or #MSPACK_SYS_SEEK_END (the offset should be measured from
++ * the end of the file)
++ * @return zero for success, non-zero for an error
++ * @see open(), tell()
++ */
++ int (*seek)(struct mspack_file *file,
++ off_t offset,
++ int mode);
++
++ /**
++ * Returns the current file position (in bytes) of the given file.
++ *
++ * @param file the file whose file position is wanted
++ * @return the current file position of the file
++ * @see open(), seek()
++ */
++ off_t (*tell)(struct mspack_file *file);
++
++ /**
++ * Used to send messages from the library to the user.
++ *
++ * Occasionally, the library generates warnings or other messages in
++ * plain english to inform the human user. These are informational only
++ * and can be ignored if not wanted.
++ *
++ * @param file may be a file handle returned from open() if this message
++ * pertains to a specific open file, or NULL if not related to
++ * a specific file.
++ * @param format a printf() style format string. It does NOT include a
++ * trailing newline.
++ * @see open()
++ */
++ void (*message)(struct mspack_file *file,
++ const char *format,
++ ...);
++
++ /**
++ * Allocates memory.
++ *
++ * @param self a self-referential pointer to the mspack_system
++ * structure whose alloc() method is being called.
++ * @param bytes the number of bytes to allocate
++ * @result a pointer to the requested number of bytes, or NULL if
++ * not enough memory is available
++ * @see free()
++ */
++ void * (*alloc)(struct mspack_system *self,
++ size_t bytes);
++
++ /**
++ * Frees memory.
++ *
++ * @param ptr the memory to be freed.
++ * @see alloc()
++ */
++ void (*free)(void *ptr);
++
++ /**
++ * Copies from one region of memory to another.
++ *
++ * The regions of memory are guaranteed not to overlap, are usually less
++ * than 256 bytes, and may not be aligned. Please note that the source
++ * parameter comes before the destination parameter, unlike the standard
++ * C function memcpy().
++ *
++ * @param src the region of memory to copy from
++ * @param dest the region of memory to copy to
++ * @param bytes the size of the memory region, in bytes
++ */
++ void (*copy)(void *src,
++ void *dest,
++ size_t bytes);
++
++ /**
++ * A null pointer to mark the end of mspack_system. It must equal NULL.
++ *
++ * Should the mspack_system structure extend in the future, this NULL
++ * will be seen, rather than have an invalid method pointer called.
++ */
++ void *null_ptr;
++};
++
++/** mspack_system::open() mode: open existing file for reading. */
++#define MSPACK_SYS_OPEN_READ (0)
++/** mspack_system::open() mode: open new file for writing */
++#define MSPACK_SYS_OPEN_WRITE (1)
++/** mspack_system::open() mode: open existing file for writing */
++#define MSPACK_SYS_OPEN_UPDATE (2)
++/** mspack_system::open() mode: open existing file for writing */
++#define MSPACK_SYS_OPEN_APPEND (3)
++
++/** mspack_system::seek() mode: seek relative to start of file */
++#define MSPACK_SYS_SEEK_START (0)
++/** mspack_system::seek() mode: seek relative to current offset */
++#define MSPACK_SYS_SEEK_CUR (1)
++/** mspack_system::seek() mode: seek relative to end of file */
++#define MSPACK_SYS_SEEK_END (2)
++
++/**
++ * A structure which represents an open file handle. The contents of this
++ * structure are determined by the implementation of the
++ * mspack_system::open() method.
++ */
++struct mspack_file {
++ int dummy;
++};
++
++/* --- error codes --------------------------------------------------------- */
++
++/** Error code: no error */
++#define MSPACK_ERR_OK (0)
++/** Error code: bad arguments to method */
++#define MSPACK_ERR_ARGS (1)
++/** Error code: error opening file */
++#define MSPACK_ERR_OPEN (2)
++/** Error code: error reading file */
++#define MSPACK_ERR_READ (3)
++/** Error code: error writing file */
++#define MSPACK_ERR_WRITE (4)
++/** Error code: seek error */
++#define MSPACK_ERR_SEEK (5)
++/** Error code: out of memory */
++#define MSPACK_ERR_NOMEMORY (6)
++/** Error code: bad "magic id" in file */
++#define MSPACK_ERR_SIGNATURE (7)
++/** Error code: bad or corrupt file format */
++#define MSPACK_ERR_DATAFORMAT (8)
++/** Error code: bad checksum or CRC */
++#define MSPACK_ERR_CHECKSUM (9)
++/** Error code: error during compression */
++#define MSPACK_ERR_CRUNCH (10)
++/** Error code: error during decompression */
++#define MSPACK_ERR_DECRUNCH (11)
++
++/* --- functions available in library -------------------------------------- */
++
++/** Creates a new CAB compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mscab_compressor or NULL
++ */
++extern struct mscab_compressor *
++ mspack_create_cab_compressor(struct mspack_system *sys);
++
++/** Creates a new CAB decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mscab_decompressor or NULL
++ */
++extern struct mscab_decompressor *
++ mspack_create_cab_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing CAB compressor.
++ * @param self the #mscab_compressor to destroy
++ */
++extern void mspack_destroy_cab_compressor(struct mscab_compressor *self);
++
++/** Destroys an existing CAB decompressor.
++ * @param self the #mscab_decompressor to destroy
++ */
++extern void mspack_destroy_cab_decompressor(struct mscab_decompressor *self);
++
++
++/** Creates a new CHM compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mschm_compressor or NULL
++ */
++extern struct mschm_compressor *
++ mspack_create_chm_compressor(struct mspack_system *sys);
++
++/** Creates a new CHM decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mschm_decompressor or NULL
++ */
++extern struct mschm_decompressor *
++ mspack_create_chm_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing CHM compressor.
++ * @param self the #mschm_compressor to destroy
++ */
++extern void mspack_destroy_chm_compressor(struct mschm_compressor *self);
++
++/** Destroys an existing CHM decompressor.
++ * @param self the #mschm_decompressor to destroy
++ */
++extern void mspack_destroy_chm_decompressor(struct mschm_decompressor *self);
++
++
++/** Creates a new LIT compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mslit_compressor or NULL
++ */
++extern struct mslit_compressor *
++ mspack_create_lit_compressor(struct mspack_system *sys);
++
++/** Creates a new LIT decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mslit_decompressor or NULL
++ */
++extern struct mslit_decompressor *
++ mspack_create_lit_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing LIT compressor.
++ * @param self the #mslit_compressor to destroy
++ */
++extern void mspack_destroy_lit_compressor(struct mslit_compressor *self);
++
++/** Destroys an existing LIT decompressor.
++ * @param self the #mslit_decompressor to destroy
++ */
++extern void mspack_destroy_lit_decompressor(struct mslit_decompressor *self);
++
++
++/** Creates a new HLP compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mshlp_compressor or NULL
++ */
++extern struct mshlp_compressor *
++ mspack_create_hlp_compressor(struct mspack_system *sys);
++
++/** Creates a new HLP decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mshlp_decompressor or NULL
++ */
++extern struct mshlp_decompressor *
++ mspack_create_hlp_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing hlp compressor.
++ * @param self the #mshlp_compressor to destroy
++ */
++extern void mspack_destroy_hlp_compressor(struct mshlp_compressor *self);
++
++/** Destroys an existing hlp decompressor.
++ * @param self the #mshlp_decompressor to destroy
++ */
++extern void mspack_destroy_hlp_decompressor(struct mshlp_decompressor *self);
++
++
++/** Creates a new SZDD compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #msszdd_compressor or NULL
++ */
++extern struct msszdd_compressor *
++ mspack_create_szdd_compressor(struct mspack_system *sys);
++
++/** Creates a new SZDD decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #msszdd_decompressor or NULL
++ */
++extern struct msszdd_decompressor *
++ mspack_create_szdd_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing SZDD compressor.
++ * @param self the #msszdd_compressor to destroy
++ */
++extern void mspack_destroy_szdd_compressor(struct msszdd_compressor *self);
++
++/** Destroys an existing SZDD decompressor.
++ * @param self the #msszdd_decompressor to destroy
++ */
++extern void mspack_destroy_szdd_decompressor(struct msszdd_decompressor *self);
++
++
++/** Creates a new KWAJ compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mskwaj_compressor or NULL
++ */
++extern struct mskwaj_compressor *
++ mspack_create_kwaj_compressor(struct mspack_system *sys);
++
++/** Creates a new KWAJ decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #mskwaj_decompressor or NULL
++ */
++extern struct mskwaj_decompressor *
++ mspack_create_kwaj_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing KWAJ compressor.
++ * @param self the #mskwaj_compressor to destroy
++ */
++extern void mspack_destroy_kwaj_compressor(struct mskwaj_compressor *self);
++
++/** Destroys an existing KWAJ decompressor.
++ * @param self the #mskwaj_decompressor to destroy
++ */
++extern void mspack_destroy_kwaj_decompressor(struct mskwaj_decompressor *self);
++
++
++/** Creates a new OAB compressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #msoab_compressor or NULL
++ */
++extern struct msoab_compressor *
++ mspack_create_oab_compressor(struct mspack_system *sys);
++
++/** Creates a new OAB decompressor.
++ * @param sys a custom mspack_system structure, or NULL to use the default
++ * @return a #msoab_decompressor or NULL
++ */
++extern struct msoab_decompressor *
++ mspack_create_oab_decompressor(struct mspack_system *sys);
++
++/** Destroys an existing OAB compressor.
++ * @param self the #msoab_compressor to destroy
++ */
++extern void mspack_destroy_oab_compressor(struct msoab_compressor *self);
++
++/** Destroys an existing OAB decompressor.
++ * @param self the #msoab_decompressor to destroy
++ */
++extern void mspack_destroy_oab_decompressor(struct msoab_decompressor *self);
++
++
++/* --- support for .CAB (MS Cabinet) file format --------------------------- */
++
++/**
++ * A structure which represents a single cabinet file.
++ *
++ * All fields are READ ONLY.
++ *
++ * If this cabinet is part of a merged cabinet set, the #files and #folders
++ * fields are common to all cabinets in the set, and will be identical.
++ *
++ * @see mscab_decompressor::open(), mscab_decompressor::close(),
++ * mscab_decompressor::search()
++ */
++struct mscabd_cabinet {
++ /**
++ * The next cabinet in a chained list, if this cabinet was opened with
++ * mscab_decompressor::search(). May be NULL to mark the end of the
++ * list.
++ */
++ struct mscabd_cabinet *next;
++
++ /**
++ * The filename of the cabinet. More correctly, the filename of the
++ * physical file that the cabinet resides in. This is given by the
++ * library user and may be in any format.
++ */
++ const char *filename;
++
++ /** The file offset of cabinet within the physical file it resides in. */
++ off_t base_offset;
++
++ /** The length of the cabinet file in bytes. */
++ unsigned int length;
++
++ /** The previous cabinet in a cabinet set, or NULL. */
++ struct mscabd_cabinet *prevcab;
++
++ /** The next cabinet in a cabinet set, or NULL. */
++ struct mscabd_cabinet *nextcab;
++
++ /** The filename of the previous cabinet in a cabinet set, or NULL. */
++ char *prevname;
++
++ /** The filename of the next cabinet in a cabinet set, or NULL. */
++ char *nextname;
++
++ /** The name of the disk containing the previous cabinet in a cabinet
++ * set, or NULL.
++ */
++ char *previnfo;
++
++ /** The name of the disk containing the next cabinet in a cabinet set,
++ * or NULL.
++ */
++ char *nextinfo;
++
++ /** A list of all files in the cabinet or cabinet set. */
++ struct mscabd_file *files;
++
++ /** A list of all folders in the cabinet or cabinet set. */
++ struct mscabd_folder *folders;
++
++ /**
++ * The set ID of the cabinet. All cabinets in the same set should have
++ * the same set ID.
++ */
++ unsigned short set_id;
++
++ /**
++ * The index number of the cabinet within the set. Numbering should
++ * start from 0 for the first cabinet in the set, and increment by 1 for
++ * each following cabinet.
++ */
++ unsigned short set_index;
++
++ /**
++ * The number of bytes reserved in the header area of the cabinet.
++ *
++ * If this is non-zero and flags has MSCAB_HDR_RESV set, this data can
++ * be read by the calling application. It is of the given length,
++ * located at offset (base_offset + MSCAB_HDR_RESV_OFFSET) in the
++ * cabinet file.
++ *
++ * @see flags
++ */
++ unsigned short header_resv;
++
++ /**
++ * Header flags.
++ *
++ * - MSCAB_HDR_PREVCAB indicates the cabinet is part of a cabinet set, and
++ * has a predecessor cabinet.
++ * - MSCAB_HDR_NEXTCAB indicates the cabinet is part of a cabinet set, and
++ * has a successor cabinet.
++ * - MSCAB_HDR_RESV indicates the cabinet has reserved header space.
++ *
++ * @see prevname, previnfo, nextname, nextinfo, header_resv
++ */
++ int flags;
++};
++
++/** Offset from start of cabinet to the reserved header data (if present). */
++#define MSCAB_HDR_RESV_OFFSET (0x28)
++
++/** Cabinet header flag: cabinet has a predecessor */
++#define MSCAB_HDR_PREVCAB (0x01)
++/** Cabinet header flag: cabinet has a successor */
++#define MSCAB_HDR_NEXTCAB (0x02)
++/** Cabinet header flag: cabinet has reserved header space */
++#define MSCAB_HDR_RESV (0x04)
++
++/**
++ * A structure which represents a single folder in a cabinet or cabinet set.
++ *
++ * All fields are READ ONLY.
++ *
++ * A folder is a single compressed stream of data. When uncompressed, it
++ * holds the data of one or more files. A folder may be split across more
++ * than one cabinet.
++ */
++struct mscabd_folder {
++ /**
++ * A pointer to the next folder in this cabinet or cabinet set, or NULL
++ * if this is the final folder.
++ */
++ struct mscabd_folder *next;
++
++ /**
++ * The compression format used by this folder.
++ *
++ * The macro MSCABD_COMP_METHOD() should be used on this field to get
++ * the algorithm used. The macro MSCABD_COMP_LEVEL() should be used to get
++ * the "compression level".
++ *
++ * @see MSCABD_COMP_METHOD(), MSCABD_COMP_LEVEL()
++ */
++ int comp_type;
++
++ /**
++ * The total number of data blocks used by this folder. This includes
++ * data blocks present in other files, if this folder spans more than
++ * one cabinet.
++ */
++ unsigned int num_blocks;
++};
++
++/**
++ * Returns the compression method used by a folder.
++ *
++ * @param comp_type a mscabd_folder::comp_type value
++ * @return one of #MSCAB_COMP_NONE, #MSCAB_COMP_MSZIP, #MSCAB_COMP_QUANTUM
++ * or #MSCAB_COMP_LZX
++ */
++#define MSCABD_COMP_METHOD(comp_type) ((comp_type) & 0x0F)
++/**
++ * Returns the compression level used by a folder.
++ *
++ * @param comp_type a mscabd_folder::comp_type value
++ * @return the compression level. This is only defined by LZX and Quantum
++ * compression
++ */
++#define MSCABD_COMP_LEVEL(comp_type) (((comp_type) >> 8) & 0x1F)
++
++/** Compression mode: no compression. */
++#define MSCAB_COMP_NONE (0)
++/** Compression mode: MSZIP (deflate) compression. */
++#define MSCAB_COMP_MSZIP (1)
++/** Compression mode: Quantum compression */
++#define MSCAB_COMP_QUANTUM (2)
++/** Compression mode: LZX compression */
++#define MSCAB_COMP_LZX (3)
++
++/**
++ * A structure which represents a single file in a cabinet or cabinet set.
++ *
++ * All fields are READ ONLY.
++ */
++struct mscabd_file {
++ /**
++ * The next file in the cabinet or cabinet set, or NULL if this is the
++ * final file.
++ */
++ struct mscabd_file *next;
++
++ /**
++ * The filename of the file.
++ *
++ * A null terminated string of up to 255 bytes in length, it may be in
++ * either ISO-8859-1 or UTF8 format, depending on the file attributes.
++ *
++ * @see attribs
++ */
++ char *filename;
++
++ /** The uncompressed length of the file, in bytes. */
++ unsigned int length;
++
++ /**
++ * File attributes.
++ *
++ * The following attributes are defined:
++ * - #MSCAB_ATTRIB_RDONLY indicates the file is write protected.
++ * - #MSCAB_ATTRIB_HIDDEN indicates the file is hidden.
++ * - #MSCAB_ATTRIB_SYSTEM indicates the file is a operating system file.
++ * - #MSCAB_ATTRIB_ARCH indicates the file is "archived".
++ * - #MSCAB_ATTRIB_EXEC indicates the file is an executable program.
++ * - #MSCAB_ATTRIB_UTF_NAME indicates the filename is in UTF8 format rather
++ * than ISO-8859-1.
++ */
++ int attribs;
++
++ /** File's last modified time, hour field. */
++ char time_h;
++ /** File's last modified time, minute field. */
++ char time_m;
++ /** File's last modified time, second field. */
++ char time_s;
++
++ /** File's last modified date, day field. */
++ char date_d;
++ /** File's last modified date, month field. */
++ char date_m;
++ /** File's last modified date, year field. */
++ int date_y;
++
++ /** A pointer to the folder that contains this file. */
++ struct mscabd_folder *folder;
++
++ /** The uncompressed offset of this file in its folder. */
++ unsigned int offset;
++};
++
++/** mscabd_file::attribs attribute: file is read-only. */
++#define MSCAB_ATTRIB_RDONLY (0x01)
++/** mscabd_file::attribs attribute: file is hidden. */
++#define MSCAB_ATTRIB_HIDDEN (0x02)
++/** mscabd_file::attribs attribute: file is an operating system file. */
++#define MSCAB_ATTRIB_SYSTEM (0x04)
++/** mscabd_file::attribs attribute: file is "archived". */
++#define MSCAB_ATTRIB_ARCH (0x20)
++/** mscabd_file::attribs attribute: file is an executable program. */
++#define MSCAB_ATTRIB_EXEC (0x40)
++/** mscabd_file::attribs attribute: filename is UTF8, not ISO-8859-1. */
++#define MSCAB_ATTRIB_UTF_NAME (0x80)
++
++/** mscab_decompressor::set_param() parameter: search buffer size. */
++#define MSCABD_PARAM_SEARCHBUF (0)
++/** mscab_decompressor::set_param() parameter: repair MS-ZIP streams? */
++#define MSCABD_PARAM_FIXMSZIP (1)
++/** mscab_decompressor::set_param() parameter: size of decompression buffer */
++#define MSCABD_PARAM_DECOMPBUF (2)
++
++/** TODO */
++struct mscab_compressor {
++ int dummy;
++};
++
++/**
++ * A decompressor for .CAB (Microsoft Cabinet) files
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_cab_decompressor(), mspack_destroy_cab_decompressor()
++ */
++struct mscab_decompressor {
++ /**
++ * Opens a cabinet file and reads its contents.
++ *
++ * If the file opened is a valid cabinet file, all headers will be read
++ * and a mscabd_cabinet structure will be returned, with a full list of
++ * folders and files.
++ *
++ * In the case of an error occuring, NULL is returned and the error code
++ * is available from last_error().
++ *
++ * The filename pointer should be considered "in use" until close() is
++ * called on the cabinet.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param filename the filename of the cabinet file. This is passed
++ * directly to mspack_system::open().
++ * @return a pointer to a mscabd_cabinet structure, or NULL on failure
++ * @see close(), search(), last_error()
++ */
++ struct mscabd_cabinet * (*open) (struct mscab_decompressor *self,
++ const char *filename);
++
++ /**
++ * Closes a previously opened cabinet or cabinet set.
++ *
++ * This closes a cabinet, all cabinets associated with it via the
++ * mscabd_cabinet::next, mscabd_cabinet::prevcab and
++ * mscabd_cabinet::nextcab pointers, and all folders and files. All
++ * memory used by these entities is freed.
++ *
++ * The cabinet pointer is now invalid and cannot be used again. All
++ * mscabd_folder and mscabd_file pointers from that cabinet or cabinet
++ * set are also now invalid, and cannot be used again.
++ *
++ * If the cabinet pointer given was created using search(), it MUST be
++ * the cabinet pointer returned by search() and not one of the later
++ * cabinet pointers further along the mscabd_cabinet::next chain.
++
++ * If extra cabinets have been added using append() or prepend(), these
++ * will all be freed, even if the cabinet pointer given is not the first
++ * cabinet in the set. Do NOT close() more than one cabinet in the set.
++ *
++ * The mscabd_cabinet::filename is not freed by the library, as it is
++ * not allocated by the library. The caller should free this itself if
++ * necessary, before it is lost forever.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param cab the cabinet to close
++ * @see open(), search(), append(), prepend()
++ */
++ void (*close)(struct mscab_decompressor *self,
++ struct mscabd_cabinet *cab);
++
++ /**
++ * Searches a regular file for embedded cabinets.
++ *
++ * This opens a normal file with the given filename and will search the
++ * entire file for embedded cabinet files
++ *
++ * If any cabinets are found, the equivalent of open() is called on each
++ * potential cabinet file at the offset it was found. All successfully
++ * open()ed cabinets are kept in a list.
++ *
++ * The first cabinet found will be returned directly as the result of
++ * this method. Any further cabinets found will be chained in a list
++ * using the mscabd_cabinet::next field.
++ *
++ * In the case of an error occuring anywhere other than the simulated
++ * open(), NULL is returned and the error code is available from
++ * last_error().
++ *
++ * If no error occurs, but no cabinets can be found in the file, NULL is
++ * returned and last_error() returns MSPACK_ERR_OK.
++ *
++ * The filename pointer should be considered in use until close() is
++ * called on the cabinet.
++ *
++ * close() should only be called on the result of search(), not on any
++ * subsequent cabinets in the mscabd_cabinet::next chain.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param filename the filename of the file to search for cabinets. This
++ * is passed directly to mspack_system::open().
++ * @return a pointer to a mscabd_cabinet structure, or NULL
++ * @see close(), open(), last_error()
++ */
++ struct mscabd_cabinet * (*search) (struct mscab_decompressor *self,
++ const char *filename);
++
++ /**
++ * Appends one mscabd_cabinet to another, forming or extending a cabinet
++ * set.
++ *
++ * This will attempt to append one cabinet to another such that
++ * <tt>(cab->nextcab == nextcab) && (nextcab->prevcab == cab)</tt> and
++ * any folders split between the two cabinets are merged.
++ *
++ * The cabinets MUST be part of a cabinet set -- a cabinet set is a
++ * cabinet that spans more than one physical cabinet file on disk -- and
++ * must be appropriately matched.
++ *
++ * It can be determined if a cabinet has further parts to load by
++ * examining the mscabd_cabinet::flags field:
++ *
++ * - if <tt>(flags & MSCAB_HDR_PREVCAB)</tt> is non-zero, there is a
++ * predecessor cabinet to open() and prepend(). Its MS-DOS
++ * case-insensitive filename is mscabd_cabinet::prevname
++ * - if <tt>(flags & MSCAB_HDR_NEXTCAB)</tt> is non-zero, there is a
++ * successor cabinet to open() and append(). Its MS-DOS case-insensitive
++ * filename is mscabd_cabinet::nextname
++ *
++ * If the cabinets do not match, an error code will be returned. Neither
++ * cabinet has been altered, and both should be closed seperately.
++ *
++ * Files and folders in a cabinet set are a single entity. All cabinets
++ * in a set use the same file list, which is updated as cabinets in the
++ * set are added. All pointers to mscabd_folder and mscabd_file
++ * structures in either cabinet must be discarded and re-obtained after
++ * merging.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param cab the cabinet which will be appended to,
++ * predecessor of nextcab
++ * @param nextcab the cabinet which will be appended,
++ * successor of cab
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see prepend(), open(), close()
++ */
++ int (*append) (struct mscab_decompressor *self,
++ struct mscabd_cabinet *cab,
++ struct mscabd_cabinet *nextcab);
++
++ /**
++ * Prepends one mscabd_cabinet to another, forming or extending a
++ * cabinet set.
++ *
++ * This will attempt to prepend one cabinet to another, such that
++ * <tt>(cab->prevcab == prevcab) && (prevcab->nextcab == cab)</tt>. In
++ * all other respects, it is identical to append(). See append() for the
++ * full documentation.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param cab the cabinet which will be prepended to,
++ * successor of prevcab
++ * @param prevcab the cabinet which will be prepended,
++ * predecessor of cab
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see append(), open(), close()
++ */
++ int (*prepend) (struct mscab_decompressor *self,
++ struct mscabd_cabinet *cab,
++ struct mscabd_cabinet *prevcab);
++
++ /**
++ * Extracts a file from a cabinet or cabinet set.
++ *
++ * This extracts a compressed file in a cabinet and writes it to the given
++ * filename.
++ *
++ * The MS-DOS filename of the file, mscabd_file::filename, is NOT USED
++ * by extract(). The caller must examine this MS-DOS filename, copy and
++ * change it as necessary, create directories as necessary, and provide
++ * the correct filename as a parameter, which will be passed unchanged
++ * to the decompressor's mspack_system::open()
++ *
++ * If the file belongs to a split folder in a multi-part cabinet set,
++ * and not enough parts of the cabinet set have been loaded and appended
++ * or prepended, an error will be returned immediately.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param file the file to be decompressed
++ * @param filename the filename of the file being written to
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*extract)(struct mscab_decompressor *self,
++ struct mscabd_file *file,
++ const char *filename);
++
++ /**
++ * Sets a CAB decompression engine parameter.
++ *
++ * The following parameters are defined:
++ * - #MSCABD_PARAM_SEARCHBUF: How many bytes should be allocated as a
++ * buffer when using search()? The minimum value is 4. The default
++ * value is 32768.
++ * - #MSCABD_PARAM_FIXMSZIP: If non-zero, extract() will ignore bad
++ * checksums and recover from decompression errors in MS-ZIP
++ * compressed folders. The default value is 0 (don't recover).
++ * - #MSCABD_PARAM_DECOMPBUF: How many bytes should be used as an input
++ * bit buffer by decompressors? The minimum value is 4. The default
++ * value is 4096.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @param param the parameter to set
++ * @param value the value to set the parameter to
++ * @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS if there
++ * is a problem with either parameter or value.
++ * @see search(), extract()
++ */
++ int (*set_param)(struct mscab_decompressor *self,
++ int param,
++ int value);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * This is useful for open() and search(), which do not return an error
++ * code directly.
++ *
++ * @param self a self-referential pointer to the mscab_decompressor
++ * instance being called
++ * @return the most recent error code
++ * @see open(), search()
++ */
++ int (*last_error)(struct mscab_decompressor *self);
++};
++
++/* --- support for .CHM (HTMLHelp) file format ----------------------------- */
++
++/**
++ * A structure which represents a file to be placed in a CHM helpfile.
++ *
++ * A contiguous array of these structures should be passed to
++ * mschm_compressor::generate(). The array list is terminated with an
++ * entry whose mschmc_file::section field is set to #MSCHMC_ENDLIST, the
++ * other fields in this entry are ignored.
++ */
++struct mschmc_file {
++ /** One of #MSCHMC_ENDLIST, #MSCHMC_UNCOMP or #MSCHMC_MSCOMP. */
++ int section;
++
++ /** The filename of the source file that will be added to the CHM. This
++ * is passed directly to mspack_system::open(). */
++ const char *filename;
++
++ /** The full path and filename of the file within the CHM helpfile, a
++ * UTF-1 encoded null-terminated string. */
++ char *chm_filename;
++
++ /** The length of the file, in bytes. This will be adhered to strictly
++ * and a read error will be issued if this many bytes cannot be read
++ * from the real file at CHM generation time. */
++ off_t length;
++};
++
++/**
++ * A structure which represents a section of a CHM helpfile.
++ *
++ * All fields are READ ONLY.
++ *
++ * Not used directly, but used as a generic base type for
++ * mschmd_sec_uncompressed and mschmd_sec_mscompressed.
++ */
++struct mschmd_section {
++ /** A pointer to the CHM helpfile that contains this section. */
++ struct mschmd_header *chm;
++
++ /**
++ * The section ID. Either 0 for the uncompressed section
++ * mschmd_sec_uncompressed, or 1 for the LZX compressed section
++ * mschmd_sec_mscompressed. No other section IDs are known.
++ */
++ unsigned int id;
++};
++
++/**
++ * A structure which represents the uncompressed section of a CHM helpfile.
++ *
++ * All fields are READ ONLY.
++ */
++struct mschmd_sec_uncompressed {
++ /** Generic section data. */
++ struct mschmd_section base;
++
++ /** The file offset of where this section begins in the CHM helpfile. */
++ off_t offset;
++};
++
++/**
++ * A structure which represents the LZX compressed section of a CHM helpfile.
++ *
++ * All fields are READ ONLY.
++ */
++struct mschmd_sec_mscompressed {
++ /** Generic section data. */
++ struct mschmd_section base;
++
++ /** A pointer to the meta-file which represents all LZX compressed data. */
++ struct mschmd_file *content;
++
++ /** A pointer to the file which contains the LZX control data. */
++ struct mschmd_file *control;
++
++ /** A pointer to the file which contains the LZX reset table. */
++ struct mschmd_file *rtable;
++
++ /** A pointer to the file which contains the LZX span information.
++ * Available only in CHM decoder version 2 and above.
++ */
++ struct mschmd_file *spaninfo;
++};
++
++/**
++ * A structure which represents a CHM helpfile.
++ *
++ * All fields are READ ONLY.
++ */
++struct mschmd_header {
++ /** The version of the CHM file format used in this file. */
++ unsigned int version;
++
++ /**
++ * The "timestamp" of the CHM helpfile.
++ *
++ * It is the lower 32 bits of a 64-bit value representing the number of
++ * centiseconds since 1601-01-01 00:00:00 UTC, plus 42. It is not useful
++ * as a timestamp, but it is useful as a semi-unique ID.
++ */
++ unsigned int timestamp;
++
++ /**
++ * The default Language and Country ID (LCID) of the user who ran the
++ * HTMLHelp Compiler. This is not the language of the CHM file itself.
++ */
++ unsigned int language;
++
++ /**
++ * The filename of the CHM helpfile. This is given by the library user
++ * and may be in any format.
++ */
++ const char *filename;
++
++ /** The length of the CHM helpfile, in bytes. */
++ off_t length;
++
++ /** A list of all non-system files in the CHM helpfile. */
++ struct mschmd_file *files;
++
++ /**
++ * A list of all system files in the CHM helpfile.
++ *
++ * System files are files which begin with "::". They are meta-files
++ * generated by the CHM creation process.
++ */
++ struct mschmd_file *sysfiles;
++
++ /** The section 0 (uncompressed) data in this CHM helpfile. */
++ struct mschmd_sec_uncompressed sec0;
++
++ /** The section 1 (MSCompressed) data in this CHM helpfile. */
++ struct mschmd_sec_mscompressed sec1;
++
++ /** The file offset of the first PMGL/PMGI directory chunk. */
++ off_t dir_offset;
++
++ /** The number of PMGL/PMGI directory chunks in this CHM helpfile. */
++ unsigned int num_chunks;
++
++ /** The size of each PMGL/PMGI chunk, in bytes. */
++ unsigned int chunk_size;
++
++ /** The "density" of the quick-reference section in PMGL/PMGI chunks. */
++ unsigned int density;
++
++ /** The depth of the index tree.
++ *
++ * - if 1, there are no PMGI chunks, only PMGL chunks.
++ * - if 2, there is 1 PMGI chunk. All chunk indices point to PMGL chunks.
++ * - if 3, the root PMGI chunk points to secondary PMGI chunks, which in
++ * turn point to PMGL chunks.
++ * - and so on...
++ */
++ unsigned int depth;
++
++ /**
++ * The number of the root PMGI chunk.
++ *
++ * If there is no index in the CHM helpfile, this will be 0xFFFFFFFF.
++ */
++ unsigned int index_root;
++
++ /**
++ * The number of the first PMGL chunk. Usually zero.
++ * Available only in CHM decoder version 2 and above.
++ */
++ unsigned int first_pmgl;
++
++ /**
++ * The number of the last PMGL chunk. Usually num_chunks-1.
++ * Available only in CHM decoder version 2 and above.
++ */
++ unsigned int last_pmgl;
++
++ /**
++ * A cache of loaded chunks, filled in by mschm_decoder::fast_find().
++ * Available only in CHM decoder version 2 and above.
++ */
++ unsigned char **chunk_cache;
++};
++
++/**
++ * A structure which represents a file stored in a CHM helpfile.
++ *
++ * All fields are READ ONLY.
++ */
++struct mschmd_file {
++ /**
++ * A pointer to the next file in the list, or NULL if this is the final
++ * file.
++ */
++ struct mschmd_file *next;
++
++ /**
++ * A pointer to the section that this file is located in. Indirectly,
++ * it also points to the CHM helpfile the file is located in.
++ */
++ struct mschmd_section *section;
++
++ /** The offset within the section data that this file is located at. */
++ off_t offset;
++
++ /** The length of this file, in bytes */
++ off_t length;
++
++ /** The filename of this file -- a null terminated string in UTF-8. */
++ char *filename;
++};
++
++/** mschmc_file::section value: end of CHM file list */
++#define MSCHMC_ENDLIST (0)
++/** mschmc_file::section value: this file is in the Uncompressed section */
++#define MSCHMC_UNCOMP (1)
++/** mschmc_file::section value: this file is in the MSCompressed section */
++#define MSCHMC_MSCOMP (2)
++
++/** mschm_compressor::set_param() parameter: "timestamp" header */
++#define MSCHMC_PARAM_TIMESTAMP (0)
++/** mschm_compressor::set_param() parameter: "language" header */
++#define MSCHMC_PARAM_LANGUAGE (1)
++/** mschm_compressor::set_param() parameter: LZX window size */
++#define MSCHMC_PARAM_LZXWINDOW (2)
++/** mschm_compressor::set_param() parameter: intra-chunk quickref density */
++#define MSCHMC_PARAM_DENSITY (3)
++/** mschm_compressor::set_param() parameter: whether to create indices */
++#define MSCHMC_PARAM_INDEX (4)
++
++/**
++ * A compressor for .CHM (Microsoft HTMLHelp) files.
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_chm_compressor(), mspack_destroy_chm_compressor()
++ */
++struct mschm_compressor {
++ /**
++ * Generates a CHM help file.
++ *
++ * The help file will contain up to two sections, an Uncompressed
++ * section and potentially an MSCompressed (LZX compressed)
++ * section.
++ *
++ * While the contents listing of a CHM file is always in lexical order,
++ * the file list passed in will be taken as the correct order for files
++ * within the sections. It is in your interest to place similar files
++ * together for better compression.
++ *
++ * There are two modes of generation, to use a temporary file or not to
++ * use one. See use_temporary_file() for the behaviour of generate() in
++ * these two different modes.
++ *
++ * @param self a self-referential pointer to the mschm_compressor
++ * instance being called
++ * @param file_list an array of mschmc_file structures, terminated
++ * with an entry whose mschmc_file::section field is
++ * #MSCHMC_ENDLIST. The order of the list is
++ * preserved within each section. The length of any
++ * mschmc_file::chm_filename string cannot exceed
++ * roughly 4096 bytes. Each source file must be able
++ * to supply as many bytes as given in the
++ * mschmc_file::length field.
++ * @param output_file the file to write the generated CHM helpfile to.
++ * This is passed directly to mspack_system::open()
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see use_temporary_file() set_param()
++ */
++ int (*generate)(struct mschm_compressor *self,
++ struct mschmc_file file_list[],
++ const char *output_file);
++
++ /**
++ * Specifies whether a temporary file is used during CHM generation.
++ *
++ * The CHM file format includes data about the compressed section (such
++ * as its overall size) that is stored in the output CHM file prior to
++ * the compressed section itself. This unavoidably requires that the
++ * compressed section has to be generated, before these details can be
++ * set. There are several ways this can be handled. Firstly, the
++ * compressed section could be generated entirely in memory before
++ * writing any of the output CHM file. This approach is not used in
++ * libmspack, as the compressed section can exceed the addressable
++ * memory space on most architectures.
++ *
++ * libmspack has two options, either to write these unknowable sections
++ * with blank data, generate the compressed section, then re-open the
++ * output file for update once the compressed section has been
++ * completed, or to write the compressed section to a temporary file,
++ * then write the entire output file at once, performing a simple
++ * file-to-file copy for the compressed section.
++ *
++ * The simple solution of buffering the entire compressed section in
++ * memory can still be used, if desired. As the temporary file's
++ * filename is passed directly to mspack_system::open(), it is possible
++ * for a custom mspack_system implementation to hold this file in memory,
++ * without writing to a disk.
++ *
++ * If a temporary file is set, generate() performs the following
++ * sequence of events: the temporary file is opened for writing, the
++ * compression algorithm writes to the temporary file, the temporary
++ * file is closed. Then the output file is opened for writing and the
++ * temporary file is re-opened for reading. The output file is written
++ * and the temporary file is read from. Both files are then closed. The
++ * temporary file itself is not deleted. If that is desired, the
++ * temporary file should be deleted after the completion of generate(),
++ * if it exists.
++ *
++ * If a temporary file is set not to be used, generate() performs the
++ * following sequence of events: the output file is opened for writing,
++ * then it is written and closed. The output file is then re-opened for
++ * update, the appropriate sections are seek()ed to and re-written, then
++ * the output file is closed.
++ *
++ * @param self a self-referential pointer to the
++ * mschm_compressor instance being called
++ * @param use_temp_file non-zero if the temporary file should be used,
++ * zero if the temporary file should not be used.
++ * @param temp_file a file to temporarily write compressed data to,
++ * before opening it for reading and copying the
++ * contents to the output file. This is passed
++ * directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see generate()
++ */
++ int (*use_temporary_file)(struct mschm_compressor *self,
++ int use_temp_file,
++ const char *temp_file);
++ /**
++ * Sets a CHM compression engine parameter.
++ *
++ * The following parameters are defined:
++
++ * - #MSCHMC_PARAM_TIMESTAMP: Sets the "timestamp" of the CHM file
++ * generated. This is not a timestamp, see mschmd_header::timestamp
++ * for a description. If this timestamp is 0, generate() will use its
++ * own algorithm for making a unique ID, based on the lengths and
++ * names of files in the CHM itself. Defaults to 0, any value between
++ * 0 and (2^32)-1 is valid.
++ * - #MSCHMC_PARAM_LANGUAGE: Sets the "language" of the CHM file
++ * generated. This is not the language used in the CHM file, but the
++ * language setting of the user who ran the HTMLHelp compiler. It
++ * defaults to 0x0409. The valid range is between 0x0000 and 0x7F7F.
++ * - #MSCHMC_PARAM_LZXWINDOW: Sets the size of the LZX history window,
++ * which is also the interval at which the compressed data stream can be
++ * randomly accessed. The value is not a size in bytes, but a power of
++ * two. The default value is 16 (which makes the window 2^16 bytes, or
++ * 64 kilobytes), the valid range is from 15 (32 kilobytes) to 21 (2
++ * megabytes).
++ * - #MSCHMC_PARAM_DENSITY: Sets the "density" of quick reference
++ * entries stored at the end of directory listing chunk. Each chunk is
++ * 4096 bytes in size, and contains as many file entries as there is
++ * room for. At the other end of the chunk, a list of "quick reference"
++ * pointers is included. The offset of every 'N'th file entry is given a
++ * quick reference, where N = (2^density) + 1. The default density is
++ * 2. The smallest density is 0 (N=2), the maximum is 10 (N=1025). As
++ * each file entry requires at least 5 bytes, the maximum number of
++ * entries in a single chunk is roughly 800, so the maximum value 10
++ * can be used to indicate there are no quickrefs at all.
++ * - #MSCHMC_PARAM_INDEX: Sets whether or not to include quick lookup
++ * index chunk(s), in addition to normal directory listing chunks. A
++ * value of zero means no index chunks will be created, a non-zero value
++ * means index chunks will be created. The default is zero, "don't
++ * create an index".
++ *
++ * @param self a self-referential pointer to the mschm_compressor
++ * instance being called
++ * @param param the parameter to set
++ * @param value the value to set the parameter to
++ * @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS if there
++ * is a problem with either parameter or value.
++ * @see generate()
++ */
++ int (*set_param)(struct mschm_compressor *self,
++ int param,
++ unsigned int value);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * @param self a self-referential pointer to the mschm_compressor
++ * instance being called
++ * @return the most recent error code
++ * @see set_param(), generate()
++ */
++ int (*last_error)(struct mschm_compressor *self);
++};
++
++/**
++ * A decompressor for .CHM (Microsoft HTMLHelp) files
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_chm_decompressor(), mspack_destroy_chm_decompressor()
++ */
++struct mschm_decompressor {
++ /**
++ * Opens a CHM helpfile and reads its contents.
++ *
++ * If the file opened is a valid CHM helpfile, all headers will be read
++ * and a mschmd_header structure will be returned, with a full list of
++ * files.
++ *
++ * In the case of an error occuring, NULL is returned and the error code
++ * is available from last_error().
++ *
++ * The filename pointer should be considered "in use" until close() is
++ * called on the CHM helpfile.
++ *
++ * @param self a self-referential pointer to the mschm_decompressor
++ * instance being called
++ * @param filename the filename of the CHM helpfile. This is passed
++ * directly to mspack_system::open().
++ * @return a pointer to a mschmd_header structure, or NULL on failure
++ * @see close()
++ */
++ struct mschmd_header *(*open)(struct mschm_decompressor *self,
++ const char *filename);
++
++ /**
++ * Closes a previously opened CHM helpfile.
++ *
++ * This closes a CHM helpfile, frees the mschmd_header and all
++ * mschmd_file structures associated with it (if any). This works on
++ * both helpfiles opened with open() and helpfiles opened with
++ * fast_open().
++ *
++ * The CHM header pointer is now invalid and cannot be used again. All
++ * mschmd_file pointers referencing that CHM are also now invalid, and
++ * cannot be used again.
++ *
++ * @param self a self-referential pointer to the mschm_decompressor
++ * instance being called
++ * @param chm the CHM helpfile to close
++ * @see open(), fast_open()
++ */
++ void (*close)(struct mschm_decompressor *self,
++ struct mschmd_header *chm);
++
++ /**
++ * Extracts a file from a CHM helpfile.
++ *
++ * This extracts a file from a CHM helpfile and writes it to the given
++ * filename. The filename of the file, mscabd_file::filename, is not
++ * used by extract(), but can be used by the caller as a guide for
++ * constructing an appropriate filename.
++ *
++ * This method works both with files found in the mschmd_header::files
++ * and mschmd_header::sysfiles list and mschmd_file structures generated
++ * on the fly by fast_find().
++ *
++ * @param self a self-referential pointer to the mschm_decompressor
++ * instance being called
++ * @param file the file to be decompressed
++ * @param filename the filename of the file being written to
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*extract)(struct mschm_decompressor *self,
++ struct mschmd_file *file,
++ const char *filename);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * This is useful for open() and fast_open(), which do not return an
++ * error code directly.
++ *
++ * @param self a self-referential pointer to the mschm_decompressor
++ * instance being called
++ * @return the most recent error code
++ * @see open(), extract()
++ */
++ int (*last_error)(struct mschm_decompressor *self);
++
++ /**
++ * Opens a CHM helpfile quickly.
++ *
++ * If the file opened is a valid CHM helpfile, only essential headers
++ * will be read. A mschmd_header structure will be still be returned, as
++ * with open(), but the mschmd_header::files field will be NULL. No
++ * files details will be automatically read. The fast_find() method
++ * must be used to obtain file details.
++ *
++ * In the case of an error occuring, NULL is returned and the error code
++ * is available from last_error().
++ *
++ * The filename pointer should be considered "in use" until close() is
++ * called on the CHM helpfile.
++ *
++ * @param self a self-referential pointer to the mschm_decompressor
++ * instance being called
++ * @param filename the filename of the CHM helpfile. This is passed
++ * directly to mspack_system::open().
++ * @return a pointer to a mschmd_header structure, or NULL on failure
++ * @see open(), close(), fast_find(), extract()
++ */
++ struct mschmd_header *(*fast_open)(struct mschm_decompressor *self,
++ const char *filename);
++
++ /**
++ * Finds file details quickly.
++ *
++ * Instead of reading all CHM helpfile headers and building a list of
++ * files, fast_open() and fast_find() are intended for finding file
++ * details only when they are needed. The CHM file format includes an
++ * on-disk file index to allow this.
++ *
++ * Given a case-sensitive filename, fast_find() will search the on-disk
++ * index for that file.
++ *
++ * If the file was found, the caller-provided mschmd_file structure will
++ * be filled out like so:
++ * - section: the correct value for the found file
++ * - offset: the correct value for the found file
++ * - length: the correct value for the found file
++ * - all other structure elements: NULL or 0
++ *
++ * If the file was not found, MSPACK_ERR_OK will still be returned as the
++ * result, but the caller-provided structure will be filled out like so:
++ * - section: NULL
++ * - offset: 0
++ * - length: 0
++ * - all other structure elements: NULL or 0
++ *
++ * This method is intended to be used in conjunction with CHM helpfiles
++ * opened with fast_open(), but it also works with helpfiles opened
++ * using the regular open().
++ *
++ * @param self a self-referential pointer to the mschm_decompressor
++ * instance being called
++ * @param chm the CHM helpfile to search for the file
++ * @param filename the filename of the file to search for
++ * @param f_ptr a pointer to a caller-provded mschmd_file structure
++ * @param f_size <tt>sizeof(struct mschmd_file)</tt>
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see open(), close(), fast_find(), extract()
++ */
++ int (*fast_find)(struct mschm_decompressor *self,
++ struct mschmd_header *chm,
++ const char *filename,
++ struct mschmd_file *f_ptr,
++ int f_size);
++};
++
++/* --- support for .LIT (EBook) file format -------------------------------- */
++
++/** TODO */
++struct mslit_compressor {
++ int dummy;
++};
++
++/** TODO */
++struct mslit_decompressor {
++ int dummy;
++};
++
++
++/* --- support for .HLP (MS Help) file format ------------------------------ */
++
++/** TODO */
++struct mshlp_compressor {
++ int dummy;
++};
++
++/** TODO */
++struct mshlp_decompressor {
++ int dummy;
++};
++
++
++/* --- support for SZDD file format ---------------------------------------- */
++
++/** msszdd_compressor::set_param() parameter: the missing character */
++#define MSSZDDC_PARAM_MISSINGCHAR (0)
++
++/** msszddd_header::format value - a regular SZDD file */
++#define MSSZDD_FMT_NORMAL (0)
++
++/** msszddd_header::format value - a special QBasic SZDD file */
++#define MSSZDD_FMT_QBASIC (1)
++
++/**
++ * A structure which represents an SZDD compressed file.
++ *
++ * All fields are READ ONLY.
++ */
++struct msszddd_header {
++ /** The file format; either #MSSZDD_FMT_NORMAL or #MSSZDD_FMT_QBASIC */
++ int format;
++
++ /** The amount of data in the SZDD file once uncompressed. */
++ off_t length;
++
++ /**
++ * The last character in the filename, traditionally replaced with an
++ * underscore to show the file is compressed. The null character is used
++ * to show that this character has not been stored (e.g. because the
++ * filename is not known). Generally, only characters that may appear in
++ * an MS-DOS filename (except ".") are valid.
++ */
++ char missing_char;
++};
++
++/**
++ * A compressor for the SZDD file format.
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_szdd_compressor(), mspack_destroy_szdd_compressor()
++ */
++struct msszdd_compressor {
++ /**
++ * Reads an input file and creates a compressed output file in the
++ * SZDD compressed file format. The SZDD compression format is quick
++ * but gives poor compression. It is possible for the compressed output
++ * file to be larger than the input file.
++ *
++ * Conventionally, SZDD compressed files have the final character in
++ * their filename replaced with an underscore, to show they are
++ * compressed. The missing character is stored in the compressed file
++ * itself. This is due to the restricted filename conventions of MS-DOS,
++ * most operating systems, such as UNIX, simply append another file
++ * extension to the existing filename. As mspack does not deal with
++ * filenames, this is left up to you. If you wish to set the missing
++ * character stored in the file header, use set_param() with the
++ * #MSSZDDC_PARAM_MISSINGCHAR parameter.
++ *
++ * "Stream" compression (where the length of the input data is not
++ * known) is not possible. The length of the input data is stored in the
++ * header of the SZDD file and must therefore be known before any data
++ * is compressed. Due to technical limitations of the file format, the
++ * maximum size of uncompressed file that will be accepted is 2147483647
++ * bytes.
++ *
++ * @param self a self-referential pointer to the msszdd_compressor
++ * instance being called
++ * @param input the name of the file to compressed. This is passed
++ * passed directly to mspack_system::open()
++ * @param output the name of the file to write compressed data to.
++ * This is passed directly to mspack_system::open().
++ * @param length the length of the uncompressed file, or -1 to indicate
++ * that this should be determined automatically by using
++ * mspack_system::seek() on the input file.
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see set_param()
++ */
++ int (*compress)(struct msszdd_compressor *self,
++ const char *input,
++ const char *output,
++ off_t length);
++
++ /**
++ * Sets an SZDD compression engine parameter.
++ *
++ * The following parameters are defined:
++
++ * - #MSSZDDC_PARAM_CHARACTER: the "missing character", the last character
++ * in the uncompressed file's filename, which is traditionally replaced
++ * with an underscore to show the file is compressed. Traditionally,
++ * this can only be a character that is a valid part of an MS-DOS,
++ * filename, but libmspack permits any character between 0x00 and 0xFF
++ * to be stored. 0x00 is the default, and it represents "no character
++ * stored".
++ *
++ * @param self a self-referential pointer to the msszdd_compressor
++ * instance being called
++ * @param param the parameter to set
++ * @param value the value to set the parameter to
++ * @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS if there
++ * is a problem with either parameter or value.
++ * @see compress()
++ */
++ int (*set_param)(struct msszdd_compressor *self,
++ int param,
++ unsigned int value);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * @param self a self-referential pointer to the msszdd_compressor
++ * instance being called
++ * @return the most recent error code
++ * @see compress()
++ */
++ int (*last_error)(struct mschm_decompressor *self);
++};
++
++/**
++ * A decompressor for SZDD compressed files.
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_szdd_decompressor(), mspack_destroy_szdd_decompressor()
++ */
++struct msszdd_decompressor {
++ /**
++ * Opens a SZDD file and reads the header.
++ *
++ * If the file opened is a valid SZDD file, all headers will be read and
++ * a msszddd_header structure will be returned.
++ *
++ * In the case of an error occuring, NULL is returned and the error code
++ * is available from last_error().
++ *
++ * The filename pointer should be considered "in use" until close() is
++ * called on the SZDD file.
++ *
++ * @param self a self-referential pointer to the msszdd_decompressor
++ * instance being called
++ * @param filename the filename of the SZDD compressed file. This is
++ * passed directly to mspack_system::open().
++ * @return a pointer to a msszddd_header structure, or NULL on failure
++ * @see close()
++ */
++ struct msszddd_header *(*open)(struct msszdd_decompressor *self,
++ const char *filename);
++
++ /**
++ * Closes a previously opened SZDD file.
++ *
++ * This closes a SZDD file and frees the msszddd_header associated with
++ * it.
++ *
++ * The SZDD header pointer is now invalid and cannot be used again.
++ *
++ * @param self a self-referential pointer to the msszdd_decompressor
++ * instance being called
++ * @param szdd the SZDD file to close
++ * @see open()
++ */
++ void (*close)(struct msszdd_decompressor *self,
++ struct msszddd_header *szdd);
++
++ /**
++ * Extracts the compressed data from a SZDD file.
++ *
++ * This decompresses the compressed SZDD data stream and writes it to
++ * an output file.
++ *
++ * @param self a self-referential pointer to the msszdd_decompressor
++ * instance being called
++ * @param szdd the SZDD file to extract data from
++ * @param filename the filename to write the decompressed data to. This
++ * is passed directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*extract)(struct msszdd_decompressor *self,
++ struct msszddd_header *szdd,
++ const char *filename);
++
++ /**
++ * Decompresses an SZDD file to an output file in one step.
++ *
++ * This opens an SZDD file as input, reads the header, then decompresses
++ * the compressed data immediately to an output file, finally closing
++ * both the input and output file. It is more convenient to use than
++ * open() then extract() then close(), if you do not need to know the
++ * SZDD output size or missing character.
++ *
++ * @param self a self-referential pointer to the msszdd_decompressor
++ * instance being called
++ * @param input the filename of the input SZDD file. This is passed
++ * directly to mspack_system::open().
++ * @param output the filename to write the decompressed data to. This
++ * is passed directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*decompress)(struct msszdd_decompressor *self,
++ const char *input,
++ const char *output);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * This is useful for open() which does not return an
++ * error code directly.
++ *
++ * @param self a self-referential pointer to the msszdd_decompressor
++ * instance being called
++ * @return the most recent error code
++ * @see open(), extract(), decompress()
++ */
++ int (*last_error)(struct msszdd_decompressor *self);
++};
++
++/* --- support for KWAJ file format ---------------------------------------- */
++
++/** mskwaj_compressor::set_param() parameter: compression type */
++#define MSKWAJC_PARAM_COMP_TYPE (0)
++
++/** mskwaj_compressor::set_param() parameter: include the length of the
++ * uncompressed file in the header?
++ */
++#define MSKWAJC_PARAM_INCLUDE_LENGTH (1)
++
++/** KWAJ compression type: no compression. */
++#define MSKWAJ_COMP_NONE (0)
++/** KWAJ compression type: no compression, 0xFF XOR "encryption". */
++#define MSKWAJ_COMP_XOR (1)
++/** KWAJ compression type: LZSS (same method as SZDD) */
++#define MSKWAJ_COMP_SZDD (2)
++/** KWAJ compression type: LZ+Huffman compression */
++#define MSKWAJ_COMP_LZH (3)
++/** KWAJ compression type: MSZIP */
++#define MSKWAJ_COMP_MSZIP (4)
++
++/** KWAJ optional header flag: decompressed file length is included */
++#define MSKWAJ_HDR_HASLENGTH (0x01)
++
++/** KWAJ optional header flag: unknown 2-byte structure is included */
++#define MSKWAJ_HDR_HASUNKNOWN1 (0x02)
++
++/** KWAJ optional header flag: unknown multi-sized structure is included */
++#define MSKWAJ_HDR_HASUNKNOWN2 (0x04)
++
++/** KWAJ optional header flag: file name (no extension) is included */
++#define MSKWAJ_HDR_HASFILENAME (0x08)
++
++/** KWAJ optional header flag: file extension is included */
++#define MSKWAJ_HDR_HASFILEEXT (0x10)
++
++/** KWAJ optional header flag: extra text is included */
++#define MSKWAJ_HDR_HASEXTRATEXT (0x20)
++
++/**
++ * A structure which represents an KWAJ compressed file.
++ *
++ * All fields are READ ONLY.
++ */
++struct mskwajd_header {
++ /** The compression type; should be one of #MSKWAJ_COMP_NONE,
++ * #MSKWAJ_COMP_XOR, #MSKWAJ_COMP_SZDD or #MSKWAJ_COMP_LZH
++ */
++ unsigned short comp_type;
++
++ /** The offset in the file where the compressed data stream begins */
++ off_t data_offset;
++
++ /** Flags indicating which optional headers were included. */
++ int headers;
++
++ /** The amount of uncompressed data in the file, or 0 if not present. */
++ off_t length;
++
++ /** output filename, or NULL if not present */
++ char *filename;
++
++ /** extra uncompressed data (usually text) in the header.
++ * This data can contain nulls so use extra_length to get the size.
++ */
++ char *extra;
++
++ /** length of extra uncompressed data in the header */
++ unsigned short extra_length;
++};
++
++/**
++ * A compressor for the KWAJ file format.
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_kwaj_compressor(), mspack_destroy_kwaj_compressor()
++ */
++struct mskwaj_compressor {
++ /**
++ * Reads an input file and creates a compressed output file in the
++ * KWAJ compressed file format. The KWAJ compression format is quick
++ * but gives poor compression. It is possible for the compressed output
++ * file to be larger than the input file.
++ *
++ * @param self a self-referential pointer to the mskwaj_compressor
++ * instance being called
++ * @param input the name of the file to compressed. This is passed
++ * passed directly to mspack_system::open()
++ * @param output the name of the file to write compressed data to.
++ * This is passed directly to mspack_system::open().
++ * @param length the length of the uncompressed file, or -1 to indicate
++ * that this should be determined automatically by using
++ * mspack_system::seek() on the input file.
++ * @return an error code, or MSPACK_ERR_OK if successful
++ * @see set_param()
++ */
++ int (*compress)(struct mskwaj_compressor *self,
++ const char *input,
++ const char *output,
++ off_t length);
++
++ /**
++ * Sets an KWAJ compression engine parameter.
++ *
++ * The following parameters are defined:
++ *
++ * - #MSKWAJC_PARAM_COMP_TYPE: the compression method to use. Must
++ * be one of #MSKWAJC_COMP_NONE, #MSKWAJC_COMP_XOR, #MSKWAJ_COMP_SZDD
++ * or #MSKWAJ_COMP_LZH. The default is #MSKWAJ_COMP_LZH.
++ *
++ * - #MSKWAJC_PARAM_INCLUDE_LENGTH: a boolean; should the compressed
++ * output file should include the uncompressed length of the input
++ * file in the header? This adds 4 bytes to the size of the output
++ * file. A value of zero says "no", non-zero says "yes". The default
++ * is "no".
++ *
++ * @param self a self-referential pointer to the mskwaj_compressor
++ * instance being called
++ * @param param the parameter to set
++ * @param value the value to set the parameter to
++ * @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS if there
++ * is a problem with either parameter or value.
++ * @see generate()
++ */
++ int (*set_param)(struct mskwaj_compressor *self,
++ int param,
++ unsigned int value);
++
++
++ /**
++ * Sets the original filename of the file before compression,
++ * which will be stored in the header of the output file.
++ *
++ * The filename should be a null-terminated string, it must be an
++ * MS-DOS "8.3" type filename (up to 8 bytes for the filename, then
++ * optionally a "." and up to 3 bytes for a filename extension).
++ *
++ * If NULL is passed as the filename, no filename is included in the
++ * header. This is the default.
++ *
++ * @param self a self-referential pointer to the mskwaj_compressor
++ * instance being called
++ * @param filename the original filename to use
++ * @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS if the
++ * filename is too long
++ */
++ int (*set_filename)(struct mskwaj_compressor *self,
++ const char *filename);
++
++ /**
++ * Sets arbitrary data that will be stored in the header of the
++ * output file, uncompressed. It can be up to roughly 64 kilobytes,
++ * as the overall size of the header must not exceed 65535 bytes.
++ * The data can contain null bytes if desired.
++ *
++ * If NULL is passed as the data pointer, or zero is passed as the
++ * length, no extra data is included in the header. This is the
++ * default.
++ *
++ * @param self a self-referential pointer to the mskwaj_compressor
++ * instance being called
++ * @param data a pointer to the data to be stored in the header
++ * @param bytes the length of the data in bytes
++ * @return MSPACK_ERR_OK if all is OK, or MSPACK_ERR_ARGS extra data
++ * is too long
++ */
++ int (*set_extra_data)(struct mskwaj_compressor *self,
++ void *data,
++ size_t bytes);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * @param self a self-referential pointer to the mskwaj_compressor
++ * instance being called
++ * @return the most recent error code
++ * @see compress()
++ */
++ int (*last_error)(struct mschm_decompressor *self);
++};
++
++/**
++ * A decompressor for KWAJ compressed files.
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_kwaj_decompressor(), mspack_destroy_kwaj_decompressor()
++ */
++struct mskwaj_decompressor {
++ /**
++ * Opens a KWAJ file and reads the header.
++ *
++ * If the file opened is a valid KWAJ file, all headers will be read and
++ * a mskwajd_header structure will be returned.
++ *
++ * In the case of an error occuring, NULL is returned and the error code
++ * is available from last_error().
++ *
++ * The filename pointer should be considered "in use" until close() is
++ * called on the KWAJ file.
++ *
++ * @param self a self-referential pointer to the mskwaj_decompressor
++ * instance being called
++ * @param filename the filename of the KWAJ compressed file. This is
++ * passed directly to mspack_system::open().
++ * @return a pointer to a mskwajd_header structure, or NULL on failure
++ * @see close()
++ */
++ struct mskwajd_header *(*open)(struct mskwaj_decompressor *self,
++ const char *filename);
++
++ /**
++ * Closes a previously opened KWAJ file.
++ *
++ * This closes a KWAJ file and frees the mskwajd_header associated
++ * with it. The KWAJ header pointer is now invalid and cannot be
++ * used again.
++ *
++ * @param self a self-referential pointer to the mskwaj_decompressor
++ * instance being called
++ * @param kwaj the KWAJ file to close
++ * @see open()
++ */
++ void (*close)(struct mskwaj_decompressor *self,
++ struct mskwajd_header *kwaj);
++
++ /**
++ * Extracts the compressed data from a KWAJ file.
++ *
++ * This decompresses the compressed KWAJ data stream and writes it to
++ * an output file.
++ *
++ * @param self a self-referential pointer to the mskwaj_decompressor
++ * instance being called
++ * @param kwaj the KWAJ file to extract data from
++ * @param filename the filename to write the decompressed data to. This
++ * is passed directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*extract)(struct mskwaj_decompressor *self,
++ struct mskwajd_header *kwaj,
++ const char *filename);
++
++ /**
++ * Decompresses an KWAJ file to an output file in one step.
++ *
++ * This opens an KWAJ file as input, reads the header, then decompresses
++ * the compressed data immediately to an output file, finally closing
++ * both the input and output file. It is more convenient to use than
++ * open() then extract() then close(), if you do not need to know the
++ * KWAJ output size or output filename.
++ *
++ * @param self a self-referential pointer to the mskwaj_decompressor
++ * instance being called
++ * @param input the filename of the input KWAJ file. This is passed
++ * directly to mspack_system::open().
++ * @param output the filename to write the decompressed data to. This
++ * is passed directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*decompress)(struct mskwaj_decompressor *self,
++ const char *input,
++ const char *output);
++
++ /**
++ * Returns the error code set by the most recently called method.
++ *
++ * This is useful for open() which does not return an
++ * error code directly.
++ *
++ * @param self a self-referential pointer to the mskwaj_decompressor
++ * instance being called
++ * @return the most recent error code
++ * @see open(), search()
++ */
++ int (*last_error)(struct mskwaj_decompressor *self);
++};
++
++/* --- support for .LZX (Offline Address Book) file format ----------------- */
++
++/**
++ * A compressor for the Offline Address Book (OAB) format.
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_oab_compressor(), mspack_destroy_oab_compressor()
++ */
++struct msoab_compressor {
++ /**
++ * Compress a full OAB file.
++ *
++ * The input file will be read and the compressed contents written to the
++ * output file.
++ *
++ * @param self a self-referential pointer to the msoab_decompressor
++ * instance being called
++ * @param input the filename of the input file. This is passed
++ * directly to mspack_system::open().
++ * @param output the filename of the output file. This is passed
++ * directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*compress) (struct msoab_compressor *self,
++ const char *input,
++ const char *output);
++
++ /**
++ * Generate a compressed incremental OAB patch file.
++ *
++ * The two uncompressed files "input" and "base" will be read, and an
++ * incremental patch to generate "input" from "base" will be written to
++ * the output file.
++ *
++ * @param self a self-referential pointer to the msoab_compressor
++ * instance being called
++ * @param input the filename of the input file containing the new
++ * version of its contents. This is passed directly
++ * to mspack_system::open().
++ * @param base the filename of the original base file containing
++ * the old version of its contents, against which the
++ * incremental patch shall generated. This is passed
++ * directly to mspack_system::open().
++ * @param output the filename of the output file. This is passed
++ * directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*compress_incremental) (struct msoab_compressor *self,
++ const char *input,
++ const char *base,
++ const char *output);
++};
++
++/**
++ * A decompressor for .LZX (Offline Address Book) files
++ *
++ * All fields are READ ONLY.
++ *
++ * @see mspack_create_oab_decompressor(), mspack_destroy_oab_decompressor()
++ */
++struct msoab_decompressor {
++ /**
++ * Decompresses a full Offline Address Book file.
++ *
++ * If the input file is a valid compressed Offline Address Book file,
++ * it will be read and the decompressed contents will be written to
++ * the output file.
++ *
++ * @param self a self-referential pointer to the msoab_decompressor
++ * instance being called
++ * @param input the filename of the input file. This is passed
++ * directly to mspack_system::open().
++ * @param output the filename of the output file. This is passed
++ * directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*decompress) (struct msoab_decompressor *self,
++ const char *input,
++ const char *output);
++
++ /**
++ * Decompresses an Offline Address Book with an incremental patch file.
++ *
++ * This requires both a full UNCOMPRESSED Offline Address Book file to
++ * act as the "base", and a compressed incremental patch file as input.
++ * If the input file is valid, it will be decompressed with reference to
++ * the base file, and the decompressed contents will be written to the
++ * output file.
++ *
++ * There is no way to tell what the right base file is for the given
++ * incremental patch, but if you get it wrong, this will usually result
++ * in incorrect data being decompressed, which will then fail a checksum
++ * test.
++ *
++ * @param self a self-referential pointer to the msoab_decompressor
++ * instance being called
++ * @param input the filename of the input file. This is passed
++ * directly to mspack_system::open().
++ * @param base the filename of the base file to which the
++ * incremental patch shall be applied. This is passed
++ * directly to mspack_system::open().
++ * @param output the filename of the output file. This is passed
++ * directly to mspack_system::open().
++ * @return an error code, or MSPACK_ERR_OK if successful
++ */
++ int (*decompress_incremental) (struct msoab_decompressor *self,
++ const char *input,
++ const char *base,
++ const char *output);
++};
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/mszip.h b/libclamav/libmspack-0.4alpha/mspack/mszip.h
+new file mode 100644
+index 000000000000..0fe79e4af516
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/mszip.h
+@@ -0,0 +1,126 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * The deflate method was created by Phil Katz. MSZIP is equivalent to the
++ * deflate method.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_MSZIP_H
++#define MSPACK_MSZIP_H 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* MSZIP (deflate) compression / (inflate) decompression definitions */
++
++#define MSZIP_FRAME_SIZE (32768) /* size of LZ history window */
++#define MSZIP_LITERAL_MAXSYMBOLS (288) /* literal/length huffman tree */
++#define MSZIP_LITERAL_TABLEBITS (9)
++#define MSZIP_DISTANCE_MAXSYMBOLS (32) /* distance huffman tree */
++#define MSZIP_DISTANCE_TABLEBITS (6)
++
++/* if there are less direct lookup entries than symbols, the longer
++ * code pointers will be <= maxsymbols. This must not happen, or we
++ * will decode entries badly */
++#if (1 << MSZIP_LITERAL_TABLEBITS) < (MSZIP_LITERAL_MAXSYMBOLS * 2)
++# define MSZIP_LITERAL_TABLESIZE (MSZIP_LITERAL_MAXSYMBOLS * 4)
++#else
++# define MSZIP_LITERAL_TABLESIZE ((1 << MSZIP_LITERAL_TABLEBITS) + \
++ (MSZIP_LITERAL_MAXSYMBOLS * 2))
++#endif
++
++#if (1 << MSZIP_DISTANCE_TABLEBITS) < (MSZIP_DISTANCE_MAXSYMBOLS * 2)
++# define MSZIP_DISTANCE_TABLESIZE (MSZIP_DISTANCE_MAXSYMBOLS * 4)
++#else
++# define MSZIP_DISTANCE_TABLESIZE ((1 << MSZIP_DISTANCE_TABLEBITS) + \
++ (MSZIP_DISTANCE_MAXSYMBOLS * 2))
++#endif
++
++struct mszipd_stream {
++ struct mspack_system *sys; /* I/O routines */
++ struct mspack_file *input; /* input file handle */
++ struct mspack_file *output; /* output file handle */
++ unsigned int window_posn; /* offset within window */
++
++ /* inflate() will call this whenever the window should be emptied. */
++ int (*flush_window)(struct mszipd_stream *, unsigned int);
++
++ int error, repair_mode, bytes_output;
++
++ /* I/O buffering */
++ unsigned char *inbuf, *i_ptr, *i_end, *o_ptr, *o_end, input_end;
++ unsigned int bit_buffer, bits_left, inbuf_size;
++
++
++ /* huffman code lengths */
++ unsigned char LITERAL_len[MSZIP_LITERAL_MAXSYMBOLS];
++ unsigned char DISTANCE_len[MSZIP_DISTANCE_MAXSYMBOLS];
++
++ /* huffman decoding tables */
++ unsigned short LITERAL_table [MSZIP_LITERAL_TABLESIZE];
++ unsigned short DISTANCE_table[MSZIP_DISTANCE_TABLESIZE];
++
++ /* 32kb history window */
++ unsigned char window[MSZIP_FRAME_SIZE];
++};
++
++/* allocates MS-ZIP decompression stream for decoding the given stream.
++ *
++ * - uses system->alloc() to allocate memory
++ *
++ * - returns NULL if not enough memory
++ *
++ * - input_buffer_size is how many bytes to use as an input bitstream buffer
++ *
++ * - if repair_mode is non-zero, errors in decompression will be skipped
++ * and 'holes' left will be filled with zero bytes. This allows at least
++ * a partial recovery of erroneous data.
++ */
++extern struct mszipd_stream *mszipd_init(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int input_buffer_size,
++ int repair_mode);
++
++/* decompresses, or decompresses more of, an MS-ZIP stream.
++ *
++ * - out_bytes of data will be decompressed and the function will return
++ * with an MSPACK_ERR_OK return code.
++ *
++ * - decompressing will stop as soon as out_bytes is reached. if the true
++ * amount of bytes decoded spills over that amount, they will be kept for
++ * a later invocation of mszipd_decompress().
++ *
++ * - the output bytes will be passed to the system->write() function given in
++ * mszipd_init(), using the output file handle given in mszipd_init(). More
++ * than one call may be made to system->write()
++ *
++ * - MS-ZIP will read input bytes as necessary using the system->read()
++ * function given in mszipd_init(), using the input file handle given in
++ * mszipd_init(). This will continue until system->read() returns 0 bytes,
++ * or an error.
++ */
++extern int mszipd_decompress(struct mszipd_stream *zip, off_t out_bytes);
++
++/* decompresses an entire MS-ZIP stream in a KWAJ file. Acts very much
++ * like mszipd_decompress(), but doesn't take an out_bytes parameter
++ */
++extern int mszipd_decompress_kwaj(struct mszipd_stream *zip);
++
++/* frees all stream associated with an MS-ZIP data stream
++ *
++ * - calls system->free() using the system pointer given in mszipd_init()
++ */
++void mszipd_free(struct mszipd_stream *zip);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/mszipc.c b/libclamav/libmspack-0.4alpha/mspack/mszipc.c
+new file mode 100644
+index 000000000000..2f1ecb2e8757
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/mszipc.c
+@@ -0,0 +1,18 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * The deflate method was created by Phil Katz. MSZIP is equivalent to the
++ * deflate method.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* MS-ZIP compression implementation */
++
++#include <system.h>
++#include <mszip.h>
++
++/* todo */
+diff --git a/libclamav/libmspack-0.4alpha/mspack/mszipd.c b/libclamav/libmspack-0.4alpha/mspack/mszipd.c
+new file mode 100644
+index 000000000000..cd85bb9fa1ca
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/mszipd.c
+@@ -0,0 +1,514 @@
++/* This file is part of libmspack.
++ * (C) 2003-2010 Stuart Caie.
++ *
++ * The deflate method was created by Phil Katz. MSZIP is equivalent to the
++ * deflate method.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* MS-ZIP decompression implementation. */
++
++#include <system.h>
++#include <mszip.h>
++
++/* import bit-reading macros and code */
++#define BITS_TYPE struct mszipd_stream
++#define BITS_VAR zip
++#define BITS_ORDER_LSB
++#define BITS_LSB_TABLE
++#define READ_BYTES do { \
++ READ_IF_NEEDED; \
++ INJECT_BITS(*i_ptr++, 8); \
++} while (0)
++#include <readbits.h>
++
++/* import huffman macros and code */
++#define TABLEBITS(tbl) MSZIP_##tbl##_TABLEBITS
++#define MAXSYMBOLS(tbl) MSZIP_##tbl##_MAXSYMBOLS
++#define HUFF_TABLE(tbl,idx) zip->tbl##_table[idx]
++#define HUFF_LEN(tbl,idx) zip->tbl##_len[idx]
++#define HUFF_ERROR return INF_ERR_HUFFSYM
++#include <readhuff.h>
++
++#define FLUSH_IF_NEEDED do { \
++ if (zip->window_posn == MSZIP_FRAME_SIZE) { \
++ if (zip->flush_window(zip, MSZIP_FRAME_SIZE)) { \
++ return INF_ERR_FLUSH; \
++ } \
++ zip->window_posn = 0; \
++ } \
++} while (0)
++
++/* match lengths for literal codes 257.. 285 */
++static const unsigned short lit_lengths[29] = {
++ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27,
++ 31, 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258
++};
++
++/* match offsets for distance codes 0 .. 29 */
++static const unsigned short dist_offsets[30] = {
++ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385,
++ 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577
++};
++
++/* extra bits required for literal codes 257.. 285 */
++static const unsigned char lit_extrabits[29] = {
++ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2,
++ 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0
++};
++
++/* extra bits required for distance codes 0 .. 29 */
++static const unsigned char dist_extrabits[30] = {
++ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6,
++ 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13
++};
++
++/* the order of the bit length Huffman code lengths */
++static const unsigned char bitlen_order[19] = {
++ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
++};
++
++/* inflate() error codes */
++#define INF_ERR_BLOCKTYPE (-1) /* unknown block type */
++#define INF_ERR_COMPLEMENT (-2) /* block size complement mismatch */
++#define INF_ERR_FLUSH (-3) /* error from flush_window() callback */
++#define INF_ERR_BITBUF (-4) /* too many bits in bit buffer */
++#define INF_ERR_SYMLENS (-5) /* too many symbols in blocktype 2 header */
++#define INF_ERR_BITLENTBL (-6) /* failed to build bitlens huffman table */
++#define INF_ERR_LITERALTBL (-7) /* failed to build literals huffman table */
++#define INF_ERR_DISTANCETBL (-8) /* failed to build distance huffman table */
++#define INF_ERR_BITOVERRUN (-9) /* bitlen RLE code goes over table size */
++#define INF_ERR_BADBITLEN (-10) /* invalid bit-length code */
++#define INF_ERR_LITCODE (-11) /* out-of-range literal code */
++#define INF_ERR_DISTCODE (-12) /* out-of-range distance code */
++#define INF_ERR_DISTANCE (-13) /* somehow, distance is beyond 32k */
++#define INF_ERR_HUFFSYM (-14) /* out of bits decoding huffman symbol */
++
++static int zip_read_lens(struct mszipd_stream *zip) {
++ /* for the bit buffer and huffman decoding */
++ register unsigned int bit_buffer;
++ register int bits_left;
++ unsigned char *i_ptr, *i_end;
++
++ /* bitlen Huffman codes -- immediate lookup, 7 bit max code length */
++ unsigned short bl_table[(1 << 7)];
++ unsigned char bl_len[19];
++
++ unsigned char lens[MSZIP_LITERAL_MAXSYMBOLS + MSZIP_DISTANCE_MAXSYMBOLS];
++ unsigned int lit_codes, dist_codes, code, last_code=0, bitlen_codes, i, run;
++
++ RESTORE_BITS;
++
++ /* read the number of codes */
++ READ_BITS(lit_codes, 5); lit_codes += 257;
++ READ_BITS(dist_codes, 5); dist_codes += 1;
++ READ_BITS(bitlen_codes, 4); bitlen_codes += 4;
++ if (lit_codes > MSZIP_LITERAL_MAXSYMBOLS) return INF_ERR_SYMLENS;
++ if (dist_codes > MSZIP_DISTANCE_MAXSYMBOLS) return INF_ERR_SYMLENS;
++
++ /* read in the bit lengths in their unusual order */
++ for (i = 0; i < bitlen_codes; i++) READ_BITS(bl_len[bitlen_order[i]], 3);
++ while (i < 19) bl_len[bitlen_order[i++]] = 0;
++
++ /* create decoding table with an immediate lookup */
++ if (make_decode_table(19, 7, &bl_len[0], &bl_table[0])) {
++ return INF_ERR_BITLENTBL;
++ }
++
++ /* read literal / distance code lengths */
++ for (i = 0; i < (lit_codes + dist_codes); i++) {
++ /* single-level huffman lookup */
++ ENSURE_BITS(7);
++ code = bl_table[PEEK_BITS(7)];
++ REMOVE_BITS(bl_len[code]);
++
++ if (code < 16) lens[i] = last_code = code;
++ else {
++ switch (code) {
++ case 16: READ_BITS(run, 2); run += 3; code = last_code; break;
++ case 17: READ_BITS(run, 3); run += 3; code = 0; break;
++ case 18: READ_BITS(run, 7); run += 11; code = 0; break;
++ default: D(("bad code!: %u", code)) return INF_ERR_BADBITLEN;
++ }
++ if ((i + run) > (lit_codes + dist_codes)) return INF_ERR_BITOVERRUN;
++ while (run--) lens[i++] = code;
++ i--;
++ }
++ }
++
++ /* copy LITERAL code lengths and clear any remaining */
++ i = lit_codes;
++ zip->sys->copy(&lens[0], &zip->LITERAL_len[0], i);
++ while (i < MSZIP_LITERAL_MAXSYMBOLS) zip->LITERAL_len[i++] = 0;
++
++ i = dist_codes;
++ zip->sys->copy(&lens[lit_codes], &zip->DISTANCE_len[0], i);
++ while (i < MSZIP_DISTANCE_MAXSYMBOLS) zip->DISTANCE_len[i++] = 0;
++
++ STORE_BITS;
++ return 0;
++}
++
++/* a clean implementation of RFC 1951 / inflate */
++static int inflate(struct mszipd_stream *zip) {
++ unsigned int last_block, block_type, distance, length, this_run, i;
++
++ /* for the bit buffer and huffman decoding */
++ register unsigned int bit_buffer;
++ register int bits_left;
++ register unsigned short sym;
++ unsigned char *i_ptr, *i_end;
++
++ RESTORE_BITS;
++
++ do {
++ /* read in last block bit */
++ READ_BITS(last_block, 1);
++
++ /* read in block type */
++ READ_BITS(block_type, 2);
++
++ if (block_type == 0) {
++ /* uncompressed block */
++ unsigned char lens_buf[4];
++
++ /* go to byte boundary */
++ i = bits_left & 7; REMOVE_BITS(i);
++
++ /* read 4 bytes of data, emptying the bit-buffer if necessary */
++ for (i = 0; (bits_left >= 8); i++) {
++ if (i == 4) return INF_ERR_BITBUF;
++ lens_buf[i] = PEEK_BITS(8);
++ REMOVE_BITS(8);
++ }
++ if (bits_left != 0) return INF_ERR_BITBUF;
++ while (i < 4) {
++ READ_IF_NEEDED;
++ lens_buf[i++] = *i_ptr++;
++ }
++
++ /* get the length and its complement */
++ length = lens_buf[0] | (lens_buf[1] << 8);
++ i = lens_buf[2] | (lens_buf[3] << 8);
++ if (length != (~i & 0xFFFF)) return INF_ERR_COMPLEMENT;
++
++ /* read and copy the uncompressed data into the window */
++ while (length > 0) {
++ READ_IF_NEEDED;
++
++ this_run = length;
++ if (this_run > (unsigned int)(i_end - i_ptr)) this_run = i_end - i_ptr;
++ if (this_run > (MSZIP_FRAME_SIZE - zip->window_posn))
++ this_run = MSZIP_FRAME_SIZE - zip->window_posn;
++
++ zip->sys->copy(i_ptr, &zip->window[zip->window_posn], this_run);
++ zip->window_posn += this_run;
++ i_ptr += this_run;
++ length -= this_run;
++ FLUSH_IF_NEEDED;
++ }
++ }
++ else if ((block_type == 1) || (block_type == 2)) {
++ /* Huffman-compressed LZ77 block */
++ unsigned int match_posn, code;
++
++ if (block_type == 1) {
++ /* block with fixed Huffman codes */
++ i = 0;
++ while (i < 144) zip->LITERAL_len[i++] = 8;
++ while (i < 256) zip->LITERAL_len[i++] = 9;
++ while (i < 280) zip->LITERAL_len[i++] = 7;
++ while (i < 288) zip->LITERAL_len[i++] = 8;
++ for (i = 0; i < 32; i++) zip->DISTANCE_len[i] = 5;
++ }
++ else {
++ /* block with dynamic Huffman codes */
++ STORE_BITS;
++ if ((i = zip_read_lens(zip))) return i;
++ RESTORE_BITS;
++ }
++
++ /* now huffman lengths are read for either kind of block,
++ * create huffman decoding tables */
++ if (make_decode_table(MSZIP_LITERAL_MAXSYMBOLS, MSZIP_LITERAL_TABLEBITS,
++ &zip->LITERAL_len[0], &zip->LITERAL_table[0]))
++ {
++ return INF_ERR_LITERALTBL;
++ }
++
++ if (make_decode_table(MSZIP_DISTANCE_MAXSYMBOLS,MSZIP_DISTANCE_TABLEBITS,
++ &zip->DISTANCE_len[0], &zip->DISTANCE_table[0]))
++ {
++ return INF_ERR_DISTANCETBL;
++ }
++
++ /* decode forever until end of block code */
++ for (;;) {
++ READ_HUFFSYM(LITERAL, code);
++ if (code < 256) {
++ zip->window[zip->window_posn++] = (unsigned char) code;
++ FLUSH_IF_NEEDED;
++ }
++ else if (code == 256) {
++ /* END OF BLOCK CODE: loop break point */
++ break;
++ }
++ else {
++ code -= 257; /* codes 257-285 are matches */
++ if (code >= 29) return INF_ERR_LITCODE; /* codes 286-287 are illegal */
++ READ_BITS_T(length, lit_extrabits[code]);
++ length += lit_lengths[code];
++
++ READ_HUFFSYM(DISTANCE, code);
++ if (code > 30) return INF_ERR_DISTCODE;
++ READ_BITS_T(distance, dist_extrabits[code]);
++ distance += dist_offsets[code];
++
++ /* match position is window position minus distance. If distance
++ * is more than window position numerically, it must 'wrap
++ * around' the frame size. */
++ match_posn = ((distance > zip->window_posn) ? MSZIP_FRAME_SIZE : 0)
++ + zip->window_posn - distance;
++
++ /* copy match */
++ if (length < 12) {
++ /* short match, use slower loop but no loop setup code */
++ while (length--) {
++ zip->window[zip->window_posn++] = zip->window[match_posn++];
++ match_posn &= MSZIP_FRAME_SIZE - 1;
++ FLUSH_IF_NEEDED;
++ }
++ }
++ else {
++ /* longer match, use faster loop but with setup expense */
++ unsigned char *runsrc, *rundest;
++ do {
++ this_run = length;
++ if ((match_posn + this_run) > MSZIP_FRAME_SIZE)
++ this_run = MSZIP_FRAME_SIZE - match_posn;
++ if ((zip->window_posn + this_run) > MSZIP_FRAME_SIZE)
++ this_run = MSZIP_FRAME_SIZE - zip->window_posn;
++
++ rundest = &zip->window[zip->window_posn]; zip->window_posn += this_run;
++ runsrc = &zip->window[match_posn]; match_posn += this_run;
++ length -= this_run;
++ while (this_run--) *rundest++ = *runsrc++;
++ if (match_posn == MSZIP_FRAME_SIZE) match_posn = 0;
++ FLUSH_IF_NEEDED;
++ } while (length > 0);
++ }
++
++ } /* else (code >= 257) */
++
++ } /* for(;;) -- break point at 'code == 256' */
++ }
++ else {
++ /* block_type == 3 -- bad block type */
++ return INF_ERR_BLOCKTYPE;
++ }
++ } while (!last_block);
++
++ /* flush the remaining data */
++ if (zip->window_posn) {
++ if (zip->flush_window(zip, zip->window_posn)) return INF_ERR_FLUSH;
++ }
++ STORE_BITS;
++
++ /* return success */
++ return 0;
++}
++
++/* inflate() calls this whenever the window should be flushed. As
++ * MSZIP only expands to the size of the window, the implementation used
++ * simply keeps track of the amount of data flushed, and if more than 32k
++ * is flushed, an error is raised.
++ */
++static int mszipd_flush_window(struct mszipd_stream *zip,
++ unsigned int data_flushed)
++{
++ zip->bytes_output += data_flushed;
++ if (zip->bytes_output > MSZIP_FRAME_SIZE) {
++ D(("overflow: %u bytes flushed, total is now %u",
++ data_flushed, zip->bytes_output))
++ return 1;
++ }
++ return 0;
++}
++
++struct mszipd_stream *mszipd_init(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int input_buffer_size,
++ int repair_mode)
++{
++ struct mszipd_stream *zip;
++
++ if (!system) return NULL;
++
++ input_buffer_size = (input_buffer_size + 1) & -2;
++ if (!input_buffer_size) return NULL;
++
++ /* allocate decompression state */
++ if (!(zip = (struct mszipd_stream *) system->alloc(system, sizeof(struct mszipd_stream)))) {
++ return NULL;
++ }
++
++ /* allocate input buffer */
++ zip->inbuf = (unsigned char *) system->alloc(system, (size_t) input_buffer_size);
++ if (!zip->inbuf) {
++ system->free(zip);
++ return NULL;
++ }
++
++ /* initialise decompression state */
++ zip->sys = system;
++ zip->input = input;
++ zip->output = output;
++ zip->inbuf_size = input_buffer_size;
++ zip->input_end = 0;
++ zip->error = MSPACK_ERR_OK;
++ zip->repair_mode = repair_mode;
++ zip->flush_window = &mszipd_flush_window;
++
++ zip->i_ptr = zip->i_end = &zip->inbuf[0];
++ zip->o_ptr = zip->o_end = NULL;
++ zip->bit_buffer = 0; zip->bits_left = 0;
++ return zip;
++}
++
++int mszipd_decompress(struct mszipd_stream *zip, off_t out_bytes) {
++ /* for the bit buffer */
++ register unsigned int bit_buffer;
++ register int bits_left;
++ unsigned char *i_ptr, *i_end;
++
++ int i, state, error;
++
++ /* easy answers */
++ if (!zip || (out_bytes < 0)) return MSPACK_ERR_ARGS;
++ if (zip->error) return zip->error;
++
++ /* flush out any stored-up bytes before we begin */
++ i = zip->o_end - zip->o_ptr;
++ if ((off_t) i > out_bytes) i = (int) out_bytes;
++ if (i) {
++ if (zip->sys->write(zip->output, zip->o_ptr, i) != i) {
++ return zip->error = MSPACK_ERR_WRITE;
++ }
++ zip->o_ptr += i;
++ out_bytes -= i;
++ }
++ if (out_bytes == 0) return MSPACK_ERR_OK;
++
++
++ while (out_bytes > 0) {
++ /* unpack another block */
++ RESTORE_BITS;
++
++ /* skip to next read 'CK' header */
++ i = bits_left & 7; REMOVE_BITS(i); /* align to bytestream */
++ state = 0;
++ do {
++ READ_BITS(i, 8);
++ if (i == 'C') state = 1;
++ else if ((state == 1) && (i == 'K')) state = 2;
++ else state = 0;
++ } while (state != 2);
++
++ /* inflate a block, repair and realign if necessary */
++ zip->window_posn = 0;
++ zip->bytes_output = 0;
++ STORE_BITS;
++ if ((error = inflate(zip))) {
++ D(("inflate error %d", error))
++ if (zip->repair_mode) {
++ /* recover partially-inflated buffers */
++ if (zip->bytes_output == 0 && zip->window_posn > 0) {
++ zip->flush_window(zip, zip->window_posn);
++ }
++ zip->sys->message(NULL, "MSZIP error, %u bytes of data lost.",
++ MSZIP_FRAME_SIZE - zip->bytes_output);
++ for (i = zip->bytes_output; i < MSZIP_FRAME_SIZE; i++) {
++ zip->window[i] = '\0';
++ }
++ zip->bytes_output = MSZIP_FRAME_SIZE;
++ }
++ else {
++ return zip->error = (error > 0) ? error : MSPACK_ERR_DECRUNCH;
++ }
++ }
++ zip->o_ptr = &zip->window[0];
++ zip->o_end = &zip->o_ptr[zip->bytes_output];
++
++ /* write a frame */
++ i = (out_bytes < (off_t)zip->bytes_output) ?
++ (int)out_bytes : zip->bytes_output;
++ if (zip->sys->write(zip->output, zip->o_ptr, i) != i) {
++ return zip->error = MSPACK_ERR_WRITE;
++ }
++
++ /* mspack errors (i.e. read errors) are fatal and can't be recovered */
++ if ((error > 0) && zip->repair_mode) return error;
++
++ zip->o_ptr += i;
++ out_bytes -= i;
++ }
++
++ if (out_bytes) {
++ D(("bytes left to output"))
++ return zip->error = MSPACK_ERR_DECRUNCH;
++ }
++ return MSPACK_ERR_OK;
++}
++
++int mszipd_decompress_kwaj(struct mszipd_stream *zip) {
++ /* for the bit buffer */
++ register unsigned int bit_buffer;
++ register int bits_left;
++ unsigned char *i_ptr, *i_end;
++
++ int i, error, block_len;
++
++ /* unpack blocks until block_len == 0 */
++ for (;;) {
++ RESTORE_BITS;
++
++ /* align to bytestream, read block_len */
++ i = bits_left & 7; REMOVE_BITS(i);
++ READ_BITS(block_len, 8);
++ READ_BITS(i, 8); block_len |= i << 8;
++
++ if (block_len == 0) break;
++
++ /* read "CK" header */
++ READ_BITS(i, 8); if (i != 'C') return MSPACK_ERR_DATAFORMAT;
++ READ_BITS(i, 8); if (i != 'K') return MSPACK_ERR_DATAFORMAT;
++
++ /* inflate block */
++ zip->window_posn = 0;
++ zip->bytes_output = 0;
++ STORE_BITS;
++ if ((error = inflate(zip))) {
++ D(("inflate error %d", error))
++ return zip->error = (error > 0) ? error : MSPACK_ERR_DECRUNCH;
++ }
++
++ /* write inflated block */
++ if (zip->sys->write(zip->output, &zip->window[0], zip->bytes_output)
++ != zip->bytes_output) return zip->error = MSPACK_ERR_WRITE;
++ }
++ return MSPACK_ERR_OK;
++}
++
++void mszipd_free(struct mszipd_stream *zip) {
++ struct mspack_system *sys;
++ if (zip) {
++ sys = zip->sys;
++ sys->free(zip->inbuf);
++ sys->free(zip);
++ }
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/oab.h b/libclamav/libmspack-0.4alpha/mspack/oab.h
+new file mode 100644
+index 000000000000..565220888097
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/oab.h
+@@ -0,0 +1,60 @@
++/* This file is part of libmspack.
++ * © 2013 Intel Corporation
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_OAB_H
++#define MSPACK_OAB_H 1
++
++#include <system.h>
++
++/* generic OAB definitions */
++
++/* OAB compression definitions */
++
++struct msoab_compressor_p {
++ struct msoab_compressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++/* OAB decompression definitions */
++
++struct msoab_decompressor_p {
++ struct msoab_decompressor base;
++ struct mspack_system *system;
++ /* todo */
++};
++
++#define oabhead_VersionHi (0x0000)
++#define oabhead_VersionLo (0x0004)
++#define oabhead_BlockMax (0x0008)
++#define oabhead_TargetSize (0x000c)
++#define oabhead_SIZEOF (0x0010)
++
++#define oabblk_Flags (0x0000)
++#define oabblk_CompSize (0x0004)
++#define oabblk_UncompSize (0x0008)
++#define oabblk_CRC (0x000c)
++#define oabblk_SIZEOF (0x0010)
++
++#define patchhead_VersionHi (0x0000)
++#define patchhead_VersionLo (0x0004)
++#define patchhead_BlockMax (0x0008)
++#define patchhead_SourceSize (0x000c)
++#define patchhead_TargetSize (0x0010)
++#define patchhead_SourceCRC (0x0014)
++#define patchhead_TargetCRC (0x0018)
++#define patchhead_SIZEOF (0x001c)
++
++#define patchblk_PatchSize (0x0000)
++#define patchblk_TargetSize (0x0004)
++#define patchblk_SourceSize (0x0008)
++#define patchblk_CRC (0x000c)
++#define patchblk_SIZEOF (0x0010)
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/oabc.c b/libclamav/libmspack-0.4alpha/mspack/oabc.c
+new file mode 100644
+index 000000000000..327ce61ba12c
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/oabc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * © 2013 Intel Corporation
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* OAB compression implementation */
++
++#include <system.h>
++#include <oab.h>
++
++struct msoab_compressor *
++ mspack_create_oab_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_oab_compressor(struct msoab_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/oabd.c b/libclamav/libmspack-0.4alpha/mspack/oabd.c
+new file mode 100644
+index 000000000000..e4b9e4bbc084
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/oabd.c
+@@ -0,0 +1,408 @@
++/* This file is part of libmspack.
++ * © 2013 Intel Corporation
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* The Exchange Online Addressbook (OAB or sometimes OAL) is distributed
++ * as a .LZX file in one of two forms. Either a "full download" containing
++ * the entire address list, or an incremental binary patch which should be
++ * applied to a previous version of the full decompressed data.
++ *
++ * The contents and format of the decompressed OAB are not handled here.
++ *
++ * For a complete description of the format, see the MSDN site:
++ *
++ * http://msdn.microsoft.com/en-us/library/cc463914 - [MS-OXOAB].pdf
++ * http://msdn.microsoft.com/en-us/library/cc483133 - [MS-PATCH].pdf
++ */
++
++/* OAB decompression implementation */
++
++#include <system.h>
++#include <oab.h>
++#include <lzx.h>
++#include <crc32.h>
++
++/* prototypes */
++static int oabd_decompress(struct msoab_decompressor *self, const char *input,
++ const char *output);
++static int oabd_decompress_incremental(struct msoab_decompressor *self,
++ const char *input, const char *base,
++ const char *output);
++
++struct msoab_decompressor *
++ mspack_create_oab_decompressor(struct mspack_system *sys)
++{
++ struct msoab_decompressor_p *self = NULL;
++
++ if (!sys) sys = mspack_default_system;
++ if (!mspack_valid_system(sys)) return NULL;
++
++ if ((self = (struct msoab_decompressor_p *) sys->alloc(sys, sizeof(struct msoab_decompressor_p)))) {
++ self->base.decompress = &oabd_decompress;
++ self->base.decompress_incremental = &oabd_decompress_incremental;
++ self->system = sys;
++ }
++ return (struct msoab_decompressor *) self;
++}
++
++void mspack_destroy_oab_decompressor(struct msoab_decompressor *base) {
++ struct msoab_decompressor_p *self = (struct msoab_decompressor_p *)base;
++ if (self) {
++ struct mspack_system *sys = self->system;
++ sys->free(self);
++ }
++}
++
++struct oabd_file {
++ struct mspack_system *orig_sys;
++ struct mspack_file *orig_file;
++ unsigned int crc;
++ size_t available;
++};
++
++
++static int oabd_sys_read (struct mspack_file *base_file, void *buf, int size)
++{
++ struct oabd_file *file = (struct oabd_file *)base_file;
++ int bytes_read;
++
++ if ((size_t)size > file->available)
++ size = file->available;
++
++ bytes_read = file->orig_sys->read(file->orig_file, buf, size);
++ if (bytes_read < 0)
++ return bytes_read;
++
++ file->available -= bytes_read;
++ return bytes_read;
++}
++
++static int oabd_sys_write (struct mspack_file *base_file, void *buf, int size)
++{
++ struct oabd_file *file = (struct oabd_file *)base_file;
++ int bytes_written = file->orig_sys->write(file->orig_file, buf, size);
++
++ if (bytes_written > 0)
++ file->crc = crc32(file->crc, buf, bytes_written);
++
++ return bytes_written;
++}
++
++static int oabd_decompress(struct msoab_decompressor *_self, const char *input,
++ const char *output)
++{
++ struct msoab_decompressor_p *self = (struct msoab_decompressor_p *) _self;
++ struct mspack_system *sys;
++ struct mspack_file *infh = NULL;
++ struct mspack_file *outfh = NULL;
++ unsigned char *buf = NULL;
++ unsigned char hdrbuf[oabhead_SIZEOF];
++ unsigned int block_max, target_size;
++ struct lzxd_stream *lzx = NULL;
++ struct mspack_system oabd_sys;
++ struct oabd_file in_ofh, out_ofh;
++ unsigned int window_bits;
++ int ret = MSPACK_ERR_OK;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ sys = self->system;
++
++ infh = sys->open(sys, input, MSPACK_SYS_OPEN_READ);
++ if (!infh) {
++ ret = MSPACK_ERR_OPEN;
++ goto out;
++ }
++
++ if (sys->read(infh, hdrbuf, oabhead_SIZEOF) != oabhead_SIZEOF) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++
++ if (EndGetI32(&hdrbuf[oabhead_VersionHi]) != 3 ||
++ EndGetI32(&hdrbuf[oabhead_VersionLo]) != 1) {
++ ret = MSPACK_ERR_SIGNATURE;
++ goto out;
++ }
++
++ block_max = EndGetI32(&hdrbuf[oabhead_BlockMax]);
++ target_size = EndGetI32(&hdrbuf[oabhead_TargetSize]);
++
++ /* We use it for reading block headers too */
++ if (block_max < oabblk_SIZEOF)
++ block_max = oabblk_SIZEOF;
++
++ outfh = sys->open(sys, output, MSPACK_SYS_OPEN_WRITE);
++ if (!outfh) {
++ ret = MSPACK_ERR_OPEN;
++ goto out;
++ }
++
++ buf = sys->alloc(sys, block_max);
++ if (!buf) {
++ ret = MSPACK_ERR_NOMEMORY;
++ goto out;
++ }
++
++ oabd_sys = *sys;
++ oabd_sys.read = oabd_sys_read;
++ oabd_sys.write = oabd_sys_write;
++
++ in_ofh.orig_sys = sys;
++ in_ofh.orig_file = infh;
++
++ out_ofh.orig_sys = sys;
++ out_ofh.orig_file = outfh;
++
++ while (target_size) {
++ unsigned int blk_csize, blk_dsize, blk_crc, blk_flags;
++
++ if (sys->read(infh, buf, oabblk_SIZEOF) != oabblk_SIZEOF) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++ blk_flags = EndGetI32(&buf[oabblk_Flags]);
++ blk_csize = EndGetI32(&buf[oabblk_CompSize]);
++ blk_dsize = EndGetI32(&buf[oabblk_UncompSize]);
++ blk_crc = EndGetI32(&buf[oabblk_CRC]);
++
++ if (blk_dsize > block_max || blk_dsize > target_size || blk_flags > 1) {
++ ret = MSPACK_ERR_DATAFORMAT;
++ goto out;
++ }
++
++ if (!blk_flags) {
++ /* Uncompressed block */
++ if (blk_dsize != blk_csize) {
++ ret = MSPACK_ERR_DATAFORMAT;
++ goto out;
++ }
++ if (sys->read(infh, buf, blk_dsize) != (int)blk_dsize) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++ if (sys->write(outfh, buf, blk_dsize) != (int)blk_dsize) {
++ ret = MSPACK_ERR_WRITE;
++ goto out;
++ }
++ } else {
++ /* LZX compressed block */
++ window_bits = 17;
++
++ while (window_bits < 25 && (1U << window_bits) < blk_dsize)
++ window_bits++;
++
++ in_ofh.available = blk_csize;
++ out_ofh.crc = 0xffffffff;
++
++ lzx = lzxd_init(&oabd_sys, (void *)&in_ofh, (void *)&out_ofh, window_bits,
++ 0, 4096, blk_dsize, 1);
++ if (!lzx) {
++ ret = MSPACK_ERR_NOMEMORY;
++ goto out;
++ }
++
++ ret = lzxd_decompress(lzx, blk_dsize);
++ if (ret != MSPACK_ERR_OK)
++ goto out;
++
++ lzxd_free(lzx);
++ lzx = NULL;
++
++ /* Consume any trailing padding bytes before the next block */
++ while (in_ofh.available) {
++ int count = block_max;
++ if ((size_t)count > in_ofh.available)
++ count = in_ofh.available;
++
++ count = sys->read(infh, buf, count);
++ if (count < 0) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++ in_ofh.available -= count;
++ }
++
++ if (out_ofh.crc != blk_crc) {
++ ret = MSPACK_ERR_CHECKSUM;
++ goto out;
++ }
++ }
++ target_size -= blk_dsize;
++ }
++
++ out:
++ if (lzx)
++ lzxd_free(lzx);
++ if (buf)
++ sys->free(buf);
++ if (outfh)
++ sys->close(outfh);
++ if (infh)
++ sys->close(infh);
++
++ return ret;
++}
++
++static int oabd_decompress_incremental(struct msoab_decompressor *_self,
++ const char *input, const char *base,
++ const char *output)
++{
++ struct msoab_decompressor_p *self = (struct msoab_decompressor_p *) _self;
++ struct mspack_system *sys;
++ struct mspack_file *infh = NULL;
++ struct mspack_file *basefh = NULL;
++ struct mspack_file *outfh = NULL;
++ unsigned char *buf = NULL;
++ unsigned char hdrbuf[patchhead_SIZEOF];
++ unsigned int block_max, source_size, target_size, source_crc, target_crc;
++ struct lzxd_stream *lzx = NULL;
++ struct mspack_system oabd_sys;
++ struct oabd_file in_ofh, out_ofh;
++ unsigned int window_bits, window_size;
++ int ret = MSPACK_ERR_OK;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ sys = self->system;
++
++ infh = sys->open(sys, input, MSPACK_SYS_OPEN_READ);
++ if (!infh) {
++ ret = MSPACK_ERR_OPEN;
++ goto out;
++ }
++
++ if (sys->read(infh, hdrbuf, patchhead_SIZEOF) != patchhead_SIZEOF) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++
++ if (EndGetI32(&hdrbuf[patchhead_VersionHi]) != 3 ||
++ EndGetI32(&hdrbuf[patchhead_VersionLo]) != 2) {
++ ret = MSPACK_ERR_SIGNATURE;
++ goto out;
++ }
++
++ block_max = EndGetI32(&hdrbuf[patchhead_BlockMax]);
++ source_size = EndGetI32(&hdrbuf[patchhead_SourceSize]);
++ target_size = EndGetI32(&hdrbuf[patchhead_TargetSize]);
++ source_crc = EndGetI32(&hdrbuf[patchhead_SourceCRC]);
++ target_crc = EndGetI32(&hdrbuf[patchhead_TargetCRC]);
++
++ /* We use it for reading block headers too */
++ if (block_max < patchblk_SIZEOF)
++ block_max = patchblk_SIZEOF;
++
++ basefh = sys->open(sys, base, MSPACK_SYS_OPEN_READ);
++ if (!basefh) {
++ ret = MSPACK_ERR_OPEN;
++ goto out;
++ }
++
++ outfh = sys->open(sys, output, MSPACK_SYS_OPEN_WRITE);
++ if (!outfh) {
++ ret = MSPACK_ERR_OPEN;
++ goto out;
++ }
++
++ buf = sys->alloc(sys, block_max);
++ if (!buf) {
++ ret = MSPACK_ERR_NOMEMORY;
++ goto out;
++ }
++
++ oabd_sys = *sys;
++ oabd_sys.read = oabd_sys_read;
++ oabd_sys.write = oabd_sys_write;
++
++ in_ofh.orig_sys = sys;
++ in_ofh.orig_file = infh;
++
++ out_ofh.orig_sys = sys;
++ out_ofh.orig_file = outfh;
++
++ while (target_size) {
++ unsigned int blk_csize, blk_dsize, blk_ssize, blk_crc;
++
++ if (sys->read(infh, buf, patchblk_SIZEOF) != patchblk_SIZEOF) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++ blk_csize = EndGetI32(&buf[patchblk_PatchSize]);
++ blk_dsize = EndGetI32(&buf[patchblk_TargetSize]);
++ blk_ssize = EndGetI32(&buf[patchblk_SourceSize]);
++ blk_crc = EndGetI32(&buf[patchblk_CRC]);
++
++ if (blk_dsize > block_max || blk_dsize > target_size ||
++ blk_ssize > block_max) {
++ ret = MSPACK_ERR_DATAFORMAT;
++ goto out;
++ }
++
++
++ window_size = (blk_ssize + 32767) & ~32767;
++ window_size += blk_dsize;
++ window_bits = 17;
++
++ while (window_bits < 25 && (1U << window_bits) < window_size)
++ window_bits++;
++
++ in_ofh.available = blk_csize;
++ out_ofh.crc = 0xffffffff;
++
++ lzx = lzxd_init(&oabd_sys, (void *)&in_ofh, (void *)&out_ofh, window_bits,
++ 0, 4096, blk_dsize, 1);
++ if (!lzx) {
++ ret = MSPACK_ERR_NOMEMORY;
++ goto out;
++ }
++ ret = lzxd_set_reference_data(lzx, sys, basefh, blk_ssize);
++ if (ret != MSPACK_ERR_OK)
++ goto out;
++
++ ret = lzxd_decompress(lzx, blk_dsize);
++ if (ret != MSPACK_ERR_OK)
++ goto out;
++
++ lzxd_free(lzx);
++ lzx = NULL;
++
++ /* Consume any trailing padding bytes before the next block */
++ while (in_ofh.available) {
++ int count = block_max;
++ if ((size_t)count > in_ofh.available)
++ count = in_ofh.available;
++
++ count = sys->read(infh, buf, count);
++ if (count < 0) {
++ ret = MSPACK_ERR_READ;
++ goto out;
++ }
++ in_ofh.available -= count;
++ }
++
++ if (out_ofh.crc != blk_crc) {
++ ret = MSPACK_ERR_CHECKSUM;
++ goto out;
++ }
++
++ target_size -= blk_dsize;
++ }
++
++ out:
++ if (lzx)
++ lzxd_free(lzx);
++ if (buf)
++ sys->free(buf);
++ if (outfh)
++ sys->close(outfh);
++ if (basefh)
++ sys->close(basefh);
++ if (infh)
++ sys->close(infh);
++
++ return ret;
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/qtm.h b/libclamav/libmspack-0.4alpha/mspack/qtm.h
+new file mode 100644
+index 000000000000..ab0bb4c32cc2
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/qtm.h
+@@ -0,0 +1,128 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * The Quantum method was created by David Stafford, adapted by Microsoft
++ * Corporation.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_QTM_H
++#define MSPACK_QTM_H 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* Quantum compression / decompression definitions */
++
++#define QTM_FRAME_SIZE (32768)
++
++struct qtmd_modelsym {
++ unsigned short sym, cumfreq;
++};
++
++struct qtmd_model {
++ int shiftsleft, entries;
++ struct qtmd_modelsym *syms;
++};
++
++struct qtmd_stream {
++ struct mspack_system *sys; /* I/O routines */
++ struct mspack_file *input; /* input file handle */
++ struct mspack_file *output; /* output file handle */
++
++ unsigned char *window; /* decoding window */
++ unsigned int window_size; /* window size */
++ unsigned int window_posn; /* decompression offset within window */
++ unsigned int frame_todo; /* bytes remaining for current frame */
++
++ unsigned short H, L, C; /* high/low/current: arith coding state */
++ unsigned char header_read; /* have we started decoding a new frame? */
++
++ int error;
++
++ /* I/O buffers */
++ unsigned char *inbuf, *i_ptr, *i_end, *o_ptr, *o_end;
++ unsigned int bit_buffer, inbuf_size;
++ unsigned char bits_left, input_end;
++
++ /* four literal models, each representing 64 symbols
++ * model0 for literals from 0 to 63 (selector = 0)
++ * model1 for literals from 64 to 127 (selector = 1)
++ * model2 for literals from 128 to 191 (selector = 2)
++ * model3 for literals from 129 to 255 (selector = 3) */
++ struct qtmd_model model0, model1, model2, model3;
++
++ /* three match models.
++ * model4 for match with fixed length of 3 bytes
++ * model5 for match with fixed length of 4 bytes
++ * model6 for variable length match, encoded with model6len model */
++ struct qtmd_model model4, model5, model6, model6len;
++
++ /* selector model. 0-6 to say literal (0,1,2,3) or match (4,5,6) */
++ struct qtmd_model model7;
++
++ /* symbol arrays for all models */
++ struct qtmd_modelsym m0sym[64 + 1];
++ struct qtmd_modelsym m1sym[64 + 1];
++ struct qtmd_modelsym m2sym[64 + 1];
++ struct qtmd_modelsym m3sym[64 + 1];
++ struct qtmd_modelsym m4sym[24 + 1];
++ struct qtmd_modelsym m5sym[36 + 1];
++ struct qtmd_modelsym m6sym[42 + 1], m6lsym[27 + 1];
++ struct qtmd_modelsym m7sym[7 + 1];
++};
++
++/* allocates Quantum decompression state for decoding the given stream.
++ *
++ * - returns NULL if window_bits is outwith the range 10 to 21 (inclusive).
++ *
++ * - uses system->alloc() to allocate memory
++ *
++ * - returns NULL if not enough memory
++ *
++ * - window_bits is the size of the Quantum window, from 1Kb (10) to 2Mb (21).
++ *
++ * - input_buffer_size is the number of bytes to use to store bitstream data.
++ */
++extern struct qtmd_stream *qtmd_init(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int window_bits,
++ int input_buffer_size);
++
++/* decompresses, or decompresses more of, a Quantum stream.
++ *
++ * - out_bytes of data will be decompressed and the function will return
++ * with an MSPACK_ERR_OK return code.
++ *
++ * - decompressing will stop as soon as out_bytes is reached. if the true
++ * amount of bytes decoded spills over that amount, they will be kept for
++ * a later invocation of qtmd_decompress().
++ *
++ * - the output bytes will be passed to the system->write() function given in
++ * qtmd_init(), using the output file handle given in qtmd_init(). More
++ * than one call may be made to system->write()
++ *
++ * - Quantum will read input bytes as necessary using the system->read()
++ * function given in qtmd_init(), using the input file handle given in
++ * qtmd_init(). This will continue until system->read() returns 0 bytes,
++ * or an error.
++ */
++extern int qtmd_decompress(struct qtmd_stream *qtm, off_t out_bytes);
++
++/* frees all state associated with a Quantum data stream
++ *
++ * - calls system->free() using the system pointer given in qtmd_init()
++ */
++void qtmd_free(struct qtmd_stream *qtm);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/qtmd.c b/libclamav/libmspack-0.4alpha/mspack/qtmd.c
+new file mode 100644
+index 000000000000..12b27f5608c4
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/qtmd.c
+@@ -0,0 +1,489 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * The Quantum method was created by David Stafford, adapted by Microsoft
++ * Corporation.
++ *
++ * This decompressor is based on an implementation by Matthew Russotto, used
++ * with permission.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* Quantum decompression implementation */
++
++/* This decompressor was researched and implemented by Matthew Russotto. It
++ * has since been tidied up by Stuart Caie. More information can be found at
++ * http://www.speakeasy.org/~russotto/quantumcomp.html
++ */
++
++#include <system.h>
++#include <qtm.h>
++
++/* import bit-reading macros and code */
++#define BITS_TYPE struct qtmd_stream
++#define BITS_VAR qtm
++#define BITS_ORDER_MSB
++#define READ_BYTES do { \
++ unsigned char b0, b1; \
++ READ_IF_NEEDED; b0 = *i_ptr++; \
++ READ_IF_NEEDED; b1 = *i_ptr++; \
++ INJECT_BITS((b0 << 8) | b1, 16); \
++} while (0)
++#include <readbits.h>
++
++/* Quantum static data tables:
++ *
++ * Quantum uses 'position slots' to represent match offsets. For every
++ * match, a small 'position slot' number and a small offset from that slot
++ * are encoded instead of one large offset.
++ *
++ * position_base[] is an index to the position slot bases
++ *
++ * extra_bits[] states how many bits of offset-from-base data is needed.
++ *
++ * length_base[] and length_extra[] are equivalent in function, but are
++ * used for encoding selector 6 (variable length match) match lengths,
++ * instead of match offsets.
++ *
++ * They are generated with the following code:
++ * unsigned int i, offset;
++ * for (i = 0, offset = 0; i < 42; i++) {
++ * position_base[i] = offset;
++ * extra_bits[i] = ((i < 2) ? 0 : (i - 2)) >> 1;
++ * offset += 1 << extra_bits[i];
++ * }
++ * for (i = 0, offset = 0; i < 26; i++) {
++ * length_base[i] = offset;
++ * length_extra[i] = (i < 2 ? 0 : i - 2) >> 2;
++ * offset += 1 << length_extra[i];
++ * }
++ * length_base[26] = 254; length_extra[26] = 0;
++ */
++static const unsigned int position_base[42] = {
++ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
++ 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576, 32768, 49152,
++ 65536, 98304, 131072, 196608, 262144, 393216, 524288, 786432, 1048576, 1572864
++};
++static const unsigned char extra_bits[42] = {
++ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10,
++ 11, 11, 12, 12, 13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 19, 19
++};
++static const unsigned char length_base[27] = {
++ 0, 1, 2, 3, 4, 5, 6, 8, 10, 12, 14, 18, 22, 26,
++ 30, 38, 46, 54, 62, 78, 94, 110, 126, 158, 190, 222, 254
++};
++static const unsigned char length_extra[27] = {
++ 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
++ 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0
++};
++
++
++/* Arithmetic decoder:
++ *
++ * GET_SYMBOL(model, var) fetches the next symbol from the stated model
++ * and puts it in var.
++ *
++ * If necessary, qtmd_update_model() is called.
++ */
++#define GET_SYMBOL(model, var) do { \
++ range = ((H - L) & 0xFFFF) + 1; \
++ symf = ((((C - L + 1) * model.syms[0].cumfreq)-1) / range) & 0xFFFF; \
++ \
++ for (i = 1; i < model.entries; i++) { \
++ if (model.syms[i].cumfreq <= symf) break; \
++ } \
++ (var) = model.syms[i-1].sym; \
++ \
++ range = (H - L) + 1; \
++ symf = model.syms[0].cumfreq; \
++ H = L + ((model.syms[i-1].cumfreq * range) / symf) - 1; \
++ L = L + ((model.syms[i].cumfreq * range) / symf); \
++ \
++ do { model.syms[--i].cumfreq += 8; } while (i > 0); \
++ if (model.syms[0].cumfreq > 3800) qtmd_update_model(&model); \
++ \
++ while (1) { \
++ if ((L & 0x8000) != (H & 0x8000)) { \
++ if ((L & 0x4000) && !(H & 0x4000)) { \
++ /* underflow case */ \
++ C ^= 0x4000; L &= 0x3FFF; H |= 0x4000; \
++ } \
++ else break; \
++ } \
++ L <<= 1; H = (H << 1) | 1; \
++ ENSURE_BITS(1); \
++ C = (C << 1) | PEEK_BITS(1); \
++ REMOVE_BITS(1); \
++ } \
++} while (0)
++
++static void qtmd_update_model(struct qtmd_model *model) {
++ struct qtmd_modelsym tmp;
++ int i, j;
++
++ if (--model->shiftsleft) {
++ for (i = model->entries - 1; i >= 0; i--) {
++ /* -1, not -2; the 0 entry saves this */
++ model->syms[i].cumfreq >>= 1;
++ if (model->syms[i].cumfreq <= model->syms[i+1].cumfreq) {
++ model->syms[i].cumfreq = model->syms[i+1].cumfreq + 1;
++ }
++ }
++ }
++ else {
++ model->shiftsleft = 50;
++ for (i = 0; i < model->entries; i++) {
++ /* no -1, want to include the 0 entry */
++ /* this converts cumfreqs into frequencies, then shifts right */
++ model->syms[i].cumfreq -= model->syms[i+1].cumfreq;
++ model->syms[i].cumfreq++; /* avoid losing things entirely */
++ model->syms[i].cumfreq >>= 1;
++ }
++
++ /* now sort by frequencies, decreasing order -- this must be an
++ * inplace selection sort, or a sort with the same (in)stability
++ * characteristics */
++ for (i = 0; i < model->entries - 1; i++) {
++ for (j = i + 1; j < model->entries; j++) {
++ if (model->syms[i].cumfreq < model->syms[j].cumfreq) {
++ tmp = model->syms[i];
++ model->syms[i] = model->syms[j];
++ model->syms[j] = tmp;
++ }
++ }
++ }
++
++ /* then convert frequencies back to cumfreq */
++ for (i = model->entries - 1; i >= 0; i--) {
++ model->syms[i].cumfreq += model->syms[i+1].cumfreq;
++ }
++ }
++}
++
++/* Initialises a model to decode symbols from [start] to [start]+[len]-1 */
++static void qtmd_init_model(struct qtmd_model *model,
++ struct qtmd_modelsym *syms, int start, int len)
++{
++ int i;
++
++ model->shiftsleft = 4;
++ model->entries = len;
++ model->syms = syms;
++
++ for (i = 0; i <= len; i++) {
++ syms[i].sym = start + i; /* actual symbol */
++ syms[i].cumfreq = len - i; /* current frequency of that symbol */
++ }
++}
++
++
++/*-------- main Quantum code --------*/
++
++struct qtmd_stream *qtmd_init(struct mspack_system *system,
++ struct mspack_file *input,
++ struct mspack_file *output,
++ int window_bits, int input_buffer_size)
++{
++ unsigned int window_size = 1 << window_bits;
++ struct qtmd_stream *qtm;
++ int i;
++
++ if (!system) return NULL;
++
++ /* Quantum supports window sizes of 2^10 (1Kb) through 2^21 (2Mb) */
++ if (window_bits < 10 || window_bits > 21) return NULL;
++
++ input_buffer_size = (input_buffer_size + 1) & -2;
++ if (input_buffer_size < 2) return NULL;
++
++ /* allocate decompression state */
++ if (!(qtm = (struct qtmd_stream *) system->alloc(system, sizeof(struct qtmd_stream)))) {
++ return NULL;
++ }
++
++ /* allocate decompression window and input buffer */
++ qtm->window = (unsigned char *) system->alloc(system, (size_t) window_size);
++ qtm->inbuf = (unsigned char *) system->alloc(system, (size_t) input_buffer_size);
++ if (!qtm->window || !qtm->inbuf) {
++ system->free(qtm->window);
++ system->free(qtm->inbuf);
++ system->free(qtm);
++ return NULL;
++ }
++
++ /* initialise decompression state */
++ qtm->sys = system;
++ qtm->input = input;
++ qtm->output = output;
++ qtm->inbuf_size = input_buffer_size;
++ qtm->window_size = window_size;
++ qtm->window_posn = 0;
++ qtm->frame_todo = QTM_FRAME_SIZE;
++ qtm->header_read = 0;
++ qtm->error = MSPACK_ERR_OK;
++
++ qtm->i_ptr = qtm->i_end = &qtm->inbuf[0];
++ qtm->o_ptr = qtm->o_end = &qtm->window[0];
++ qtm->input_end = 0;
++ qtm->bits_left = 0;
++ qtm->bit_buffer = 0;
++
++ /* initialise arithmetic coding models
++ * - model 4 depends on window size, ranges from 20 to 24
++ * - model 5 depends on window size, ranges from 20 to 36
++ * - model 6pos depends on window size, ranges from 20 to 42
++ */
++ i = window_bits * 2;
++ qtmd_init_model(&qtm->model0, &qtm->m0sym[0], 0, 64);
++ qtmd_init_model(&qtm->model1, &qtm->m1sym[0], 64, 64);
++ qtmd_init_model(&qtm->model2, &qtm->m2sym[0], 128, 64);
++ qtmd_init_model(&qtm->model3, &qtm->m3sym[0], 192, 64);
++ qtmd_init_model(&qtm->model4, &qtm->m4sym[0], 0, (i > 24) ? 24 : i);
++ qtmd_init_model(&qtm->model5, &qtm->m5sym[0], 0, (i > 36) ? 36 : i);
++ qtmd_init_model(&qtm->model6, &qtm->m6sym[0], 0, i);
++ qtmd_init_model(&qtm->model6len, &qtm->m6lsym[0], 0, 27);
++ qtmd_init_model(&qtm->model7, &qtm->m7sym[0], 0, 7);
++
++ /* all ok */
++ return qtm;
++}
++
++int qtmd_decompress(struct qtmd_stream *qtm, off_t out_bytes) {
++ unsigned int frame_todo, frame_end, window_posn, match_offset, range;
++ unsigned char *window, *i_ptr, *i_end, *runsrc, *rundest;
++ int i, j, selector, extra, sym, match_length;
++ unsigned short H, L, C, symf;
++
++ register unsigned int bit_buffer;
++ register unsigned char bits_left;
++
++ /* easy answers */
++ if (!qtm || (out_bytes < 0)) return MSPACK_ERR_ARGS;
++ if (qtm->error) return qtm->error;
++
++ /* flush out any stored-up bytes before we begin */
++ i = qtm->o_end - qtm->o_ptr;
++ if ((off_t) i > out_bytes) i = (int) out_bytes;
++ if (i) {
++ if (qtm->sys->write(qtm->output, qtm->o_ptr, i) != i) {
++ return qtm->error = MSPACK_ERR_WRITE;
++ }
++ qtm->o_ptr += i;
++ out_bytes -= i;
++ }
++ if (out_bytes == 0) return MSPACK_ERR_OK;
++
++ /* restore local state */
++ RESTORE_BITS;
++ window = qtm->window;
++ window_posn = qtm->window_posn;
++ frame_todo = qtm->frame_todo;
++ H = qtm->H;
++ L = qtm->L;
++ C = qtm->C;
++
++ /* while we do not have enough decoded bytes in reserve: */
++ while ((qtm->o_end - qtm->o_ptr) < out_bytes) {
++ /* read header if necessary. Initialises H, L and C */
++ if (!qtm->header_read) {
++ H = 0xFFFF; L = 0; READ_BITS(C, 16);
++ qtm->header_read = 1;
++ }
++
++ /* decode more, up to the number of bytes needed, the frame boundary,
++ * or the window boundary, whichever comes first */
++ frame_end = window_posn + (out_bytes - (qtm->o_end - qtm->o_ptr));
++ if ((window_posn + frame_todo) < frame_end) {
++ frame_end = window_posn + frame_todo;
++ }
++ if (frame_end > qtm->window_size) {
++ frame_end = qtm->window_size;
++ }
++
++ while (window_posn < frame_end) {
++ GET_SYMBOL(qtm->model7, selector);
++ if (selector < 4) {
++ /* literal byte */
++ struct qtmd_model *mdl = (selector == 0) ? &qtm->model0 :
++ ((selector == 1) ? &qtm->model1 :
++ ((selector == 2) ? &qtm->model2 :
++ &qtm->model3));
++ GET_SYMBOL((*mdl), sym);
++ window[window_posn++] = sym;
++ frame_todo--;
++ }
++ else {
++ /* match repeated string */
++ switch (selector) {
++ case 4: /* selector 4 = fixed length match (3 bytes) */
++ GET_SYMBOL(qtm->model4, sym);
++ READ_MANY_BITS(extra, extra_bits[sym]);
++ match_offset = position_base[sym] + extra + 1;
++ match_length = 3;
++ break;
++
++ case 5: /* selector 5 = fixed length match (4 bytes) */
++ GET_SYMBOL(qtm->model5, sym);
++ READ_MANY_BITS(extra, extra_bits[sym]);
++ match_offset = position_base[sym] + extra + 1;
++ match_length = 4;
++ break;
++
++ case 6: /* selector 6 = variable length match */
++ GET_SYMBOL(qtm->model6len, sym);
++ READ_MANY_BITS(extra, length_extra[sym]);
++ match_length = length_base[sym] + extra + 5;
++
++ GET_SYMBOL(qtm->model6, sym);
++ READ_MANY_BITS(extra, extra_bits[sym]);
++ match_offset = position_base[sym] + extra + 1;
++ break;
++
++ default:
++ /* should be impossible, model7 can only return 0-6 */
++ D(("got %d from selector", selector))
++ return qtm->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ rundest = &window[window_posn];
++ frame_todo -= match_length;
++
++ /* does match destination wrap the window? This situation is possible
++ * where the window size is less than the 32k frame size, but matches
++ * must not go beyond a frame boundary */
++ if ((window_posn + match_length) > qtm->window_size) {
++ /* copy first part of match, before window end */
++ i = qtm->window_size - window_posn;
++ j = window_posn - match_offset;
++ while (i--) *rundest++ = window[j++ & (qtm->window_size - 1)];
++
++ /* flush currently stored data */
++ i = (&window[qtm->window_size] - qtm->o_ptr);
++
++ /* this should not happen, but if it does then this code
++ * can't handle the situation (can't flush up to the end of
++ * the window, but can't break out either because we haven't
++ * finished writing the match). bail out in this case */
++ if (i > out_bytes) {
++ D(("during window-wrap match; %d bytes to flush but only need %d",
++ i, (int) out_bytes))
++ return qtm->error = MSPACK_ERR_DECRUNCH;
++ }
++ if (qtm->sys->write(qtm->output, qtm->o_ptr, i) != i) {
++ return qtm->error = MSPACK_ERR_WRITE;
++ }
++ out_bytes -= i;
++ qtm->o_ptr = &window[0];
++ qtm->o_end = &window[0];
++
++ /* copy second part of match, after window wrap */
++ rundest = &window[0];
++ i = match_length - (qtm->window_size - window_posn);
++ while (i--) *rundest++ = window[j++ & (qtm->window_size - 1)];
++ window_posn = window_posn + match_length - qtm->window_size;
++
++ break; /* because "window_posn < frame_end" has now failed */
++ }
++ else {
++ /* normal match - output won't wrap window or frame end */
++ i = match_length;
++
++ /* does match _offset_ wrap the window? */
++ if (match_offset > window_posn) {
++ /* j = length from match offset to end of window */
++ j = match_offset - window_posn;
++ if (j > (int) qtm->window_size) {
++ D(("match offset beyond window boundaries"))
++ return qtm->error = MSPACK_ERR_DECRUNCH;
++ }
++ runsrc = &window[qtm->window_size - j];
++ if (j < i) {
++ /* if match goes over the window edge, do two copy runs */
++ i -= j; while (j-- > 0) *rundest++ = *runsrc++;
++ runsrc = window;
++ }
++ while (i-- > 0) *rundest++ = *runsrc++;
++ }
++ else {
++ runsrc = rundest - match_offset;
++ while (i-- > 0) *rundest++ = *runsrc++;
++ }
++ window_posn += match_length;
++ }
++ } /* if (window_posn+match_length > frame_end) */
++ } /* while (window_posn < frame_end) */
++
++ qtm->o_end = &window[window_posn];
++
++ /* if we subtracted too much from frame_todo, it will
++ * wrap around past zero and go above its max value */
++ if (frame_todo > QTM_FRAME_SIZE) {
++ D(("overshot frame alignment"))
++ return qtm->error = MSPACK_ERR_DECRUNCH;
++ }
++
++ /* another frame completed? */
++ if (frame_todo == 0) {
++ /* re-align input */
++ if (bits_left & 7) REMOVE_BITS(bits_left & 7);
++
++ /* special Quantum hack -- cabd.c injects a trailer byte to allow the
++ * decompressor to realign itself. CAB Quantum blocks, unlike LZX
++ * blocks, can have anything from 0 to 4 trailing null bytes. */
++ do { READ_BITS(i, 8); } while (i != 0xFF);
++
++ qtm->header_read = 0;
++
++ frame_todo = QTM_FRAME_SIZE;
++ }
++
++ /* window wrap? */
++ if (window_posn == qtm->window_size) {
++ /* flush all currently stored data */
++ i = (qtm->o_end - qtm->o_ptr);
++ /* break out if we have more than enough to finish this request */
++ if (i >= out_bytes) break;
++ if (qtm->sys->write(qtm->output, qtm->o_ptr, i) != i) {
++ return qtm->error = MSPACK_ERR_WRITE;
++ }
++ out_bytes -= i;
++ qtm->o_ptr = &window[0];
++ qtm->o_end = &window[0];
++ window_posn = 0;
++ }
++
++ } /* while (more bytes needed) */
++
++ if (out_bytes) {
++ i = (int) out_bytes;
++ if (qtm->sys->write(qtm->output, qtm->o_ptr, i) != i) {
++ return qtm->error = MSPACK_ERR_WRITE;
++ }
++ qtm->o_ptr += i;
++ }
++
++ /* store local state */
++
++ STORE_BITS;
++ qtm->window_posn = window_posn;
++ qtm->frame_todo = frame_todo;
++ qtm->H = H;
++ qtm->L = L;
++ qtm->C = C;
++
++ return MSPACK_ERR_OK;
++}
++
++void qtmd_free(struct qtmd_stream *qtm) {
++ struct mspack_system *sys;
++ if (qtm) {
++ sys = qtm->sys;
++ sys->free(qtm->window);
++ sys->free(qtm->inbuf);
++ sys->free(qtm);
++ }
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/readbits.h b/libclamav/libmspack-0.4alpha/mspack/readbits.h
+new file mode 100644
+index 000000000000..457cbdd7d4cc
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/readbits.h
+@@ -0,0 +1,207 @@
++/* This file is part of libmspack.
++ * (C) 2003-2010 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_READBITS_H
++#define MSPACK_READBITS_H 1
++
++/* this header defines macros that read data streams by
++ * the individual bits
++ *
++ * INIT_BITS initialises bitstream state in state structure
++ * STORE_BITS stores bitstream state in state structure
++ * RESTORE_BITS restores bitstream state from state structure
++ * ENSURE_BITS(n) ensure there are at least N bits in the bit buffer
++ * READ_BITS(var,n) takes N bits from the buffer and puts them in var
++ * PEEK_BITS(n) extracts without removing N bits from the bit buffer
++ * REMOVE_BITS(n) removes N bits from the bit buffer
++ *
++ * READ_BITS simply calls ENSURE_BITS, PEEK_BITS and REMOVE_BITS,
++ * which means it's limited to reading the number of bits you can
++ * ensure at any one time. It also fails if asked to read zero bits.
++ * If you need to read zero bits, or more bits than can be ensured in
++ * one go, use READ_MANY_BITS instead.
++ *
++ * These macros have variable names baked into them, so to use them
++ * you have to define some macros:
++ * - BITS_TYPE: the type name of your state structure
++ * - BITS_VAR: the variable that points to your state structure
++ * - define BITS_ORDER_MSB if bits are read from the MSB, or
++ * define BITS_ORDER_LSB if bits are read from the LSB
++ * - READ_BYTES: some code that reads more data into the bit buffer,
++ * it should use READ_IF_NEEDED (calls read_input if the byte buffer
++ * is empty), then INJECT_BITS(data,n) to put data from the byte
++ * buffer into the bit buffer.
++ *
++ * You also need to define some variables and structure members:
++ * - unsigned char *i_ptr; // current position in the byte buffer
++ * - unsigned char *i_end; // end of the byte buffer
++ * - unsigned int bit_buffer; // the bit buffer itself
++ * - unsigned int bits_left; // number of bits remaining
++ *
++ * If you use read_input() and READ_IF_NEEDED, they also expect these
++ * structure members:
++ * - struct mspack_system *sys; // to access sys->read()
++ * - unsigned int error; // to record/return read errors
++ * - unsigned char input_end; // to mark reaching the EOF
++ * - unsigned char *inbuf; // the input byte buffer
++ * - unsigned int inbuf_size; // the size of the input byte buffer
++ *
++ * Your READ_BYTES implementation should read data from *i_ptr and
++ * put them in the bit buffer. READ_IF_NEEDED will call read_input()
++ * if i_ptr reaches i_end, and will fill up inbuf and set i_ptr to
++ * the start of inbuf and i_end to the end of inbuf.
++ *
++ * If you're reading in MSB order, the routines work by using the area
++ * beyond the MSB and the LSB of the bit buffer as a free source of
++ * zeroes when shifting. This avoids having to mask any bits. So we
++ * have to know the bit width of the bit buffer variable. We use
++ * <limits.h> and CHAR_BIT to find the size of the bit buffer in bits.
++ *
++ * If you are reading in LSB order, bits need to be masked. Normally
++ * this is done by computing the mask: N bits are masked by the value
++ * (1<<N)-1). However, you can define BITS_LSB_TABLE to use a lookup
++ * table instead of computing this. This adds two new macros,
++ * PEEK_BITS_T and READ_BITS_T which work the same way as PEEK_BITS
++ * and READ_BITS, except they use this lookup table. This is useful if
++ * you need to look up a number of bits that are only known at
++ * runtime, so the bit mask can't be turned into a constant by the
++ * compiler.
++
++ * The bit buffer datatype should be at least 32 bits wide: it must be
++ * possible to ENSURE_BITS(17), so it must be possible to add 16 new bits
++ * to the bit buffer when the bit buffer already has 1 to 15 bits left.
++ */
++
++#ifndef BITS_VAR
++# error "define BITS_VAR as the state structure poiner variable name"
++#endif
++#ifndef BITS_TYPE
++# error "define BITS_TYPE as the state structure type"
++#endif
++#if defined(BITS_ORDER_MSB) && defined(BITS_ORDER_LSB)
++# error "you must define either BITS_ORDER_MSB or BITS_ORDER_LSB"
++#else
++# if !(defined(BITS_ORDER_MSB) || defined(BITS_ORDER_LSB))
++# error "you must define BITS_ORDER_MSB or BITS_ORDER_LSB"
++# endif
++#endif
++
++#if HAVE_LIMITS_H
++# include <limits.h>
++#endif
++#ifndef CHAR_BIT
++# define CHAR_BIT (8)
++#endif
++#define BITBUF_WIDTH (sizeof(bit_buffer) * CHAR_BIT)
++
++#define INIT_BITS do { \
++ BITS_VAR->i_ptr = &BITS_VAR->inbuf[0]; \
++ BITS_VAR->i_end = &BITS_VAR->inbuf[0]; \
++ BITS_VAR->bit_buffer = 0; \
++ BITS_VAR->bits_left = 0; \
++ BITS_VAR->input_end = 0; \
++} while (0)
++
++#define STORE_BITS do { \
++ BITS_VAR->i_ptr = i_ptr; \
++ BITS_VAR->i_end = i_end; \
++ BITS_VAR->bit_buffer = bit_buffer; \
++ BITS_VAR->bits_left = bits_left; \
++} while (0)
++
++#define RESTORE_BITS do { \
++ i_ptr = BITS_VAR->i_ptr; \
++ i_end = BITS_VAR->i_end; \
++ bit_buffer = BITS_VAR->bit_buffer; \
++ bits_left = BITS_VAR->bits_left; \
++} while (0)
++
++#define ENSURE_BITS(nbits) do { \
++ while (bits_left < (nbits)) READ_BYTES; \
++} while (0)
++
++#define READ_BITS(val, nbits) do { \
++ ENSURE_BITS(nbits); \
++ (val) = PEEK_BITS(nbits); \
++ REMOVE_BITS(nbits); \
++} while (0)
++
++#define READ_MANY_BITS(val, bits) do { \
++ unsigned char needed = (bits), bitrun; \
++ (val) = 0; \
++ while (needed > 0) { \
++ if (bits_left <= (BITBUF_WIDTH - 16)) READ_BYTES; \
++ bitrun = (bits_left < needed) ? bits_left : needed; \
++ (val) = ((val) << bitrun) | PEEK_BITS(bitrun); \
++ REMOVE_BITS(bitrun); \
++ needed -= bitrun; \
++ } \
++} while (0)
++
++#ifdef BITS_ORDER_MSB
++# define PEEK_BITS(nbits) (bit_buffer >> (BITBUF_WIDTH - (nbits)))
++# define REMOVE_BITS(nbits) ((bit_buffer <<= (nbits)), (bits_left -= (nbits)))
++# define INJECT_BITS(bitdata,nbits) ((bit_buffer |= \
++ (bitdata) << (BITBUF_WIDTH - (nbits) - bits_left)), (bits_left += (nbits)))
++#else /* BITS_ORDER_LSB */
++# define PEEK_BITS(nbits) (bit_buffer & ((1 << (nbits))-1))
++# define REMOVE_BITS(nbits) ((bit_buffer >>= (nbits)), (bits_left -= (nbits)))
++# define INJECT_BITS(bitdata,nbits) ((bit_buffer |= \
++ (bitdata) << bits_left), (bits_left += (nbits)))
++#endif
++
++#ifdef BITS_LSB_TABLE
++/* lsb_bit_mask[n] = (1 << n) - 1 */
++static const unsigned short lsb_bit_mask[17] = {
++ 0x0000, 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
++ 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
++};
++# define PEEK_BITS_T(nbits) (bit_buffer & lsb_bit_mask[(nbits)])
++# define READ_BITS_T(val, nbits) do { \
++ ENSURE_BITS(nbits); \
++ (val) = PEEK_BITS_T(nbits); \
++ REMOVE_BITS(nbits); \
++} while (0)
++#endif
++
++#ifndef BITS_NO_READ_INPUT
++# define READ_IF_NEEDED do { \
++ if (i_ptr >= i_end) { \
++ if (read_input(BITS_VAR)) \
++ return BITS_VAR->error; \
++ i_ptr = BITS_VAR->i_ptr; \
++ i_end = BITS_VAR->i_end; \
++ } \
++} while (0)
++
++static int read_input(BITS_TYPE *p) {
++ int read = p->sys->read(p->input, &p->inbuf[0], (int)p->inbuf_size);
++ if (read < 0) return p->error = MSPACK_ERR_READ;
++
++ /* we might overrun the input stream by asking for bits we don't use,
++ * so fake 2 more bytes at the end of input */
++ if (read == 0) {
++ if (p->input_end) {
++ D(("out of input bytes"))
++ return p->error = MSPACK_ERR_READ;
++ }
++ else {
++ read = 2;
++ p->inbuf[0] = p->inbuf[1] = 0;
++ p->input_end = 1;
++ }
++ }
++
++ /* update i_ptr and i_end */
++ p->i_ptr = &p->inbuf[0];
++ p->i_end = &p->inbuf[read];
++ return MSPACK_ERR_OK;
++}
++#endif
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/readhuff.h b/libclamav/libmspack-0.4alpha/mspack/readhuff.h
+new file mode 100644
+index 000000000000..bb15c0a12362
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/readhuff.h
+@@ -0,0 +1,173 @@
++/* This file is part of libmspack.
++ * (C) 2003-2010 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_READHUFF_H
++#define MSPACK_READHUFF_H 1
++
++/* This implements a fast Huffman tree decoding system.
++ */
++
++#if !(defined(BITS_ORDER_MSB) || defined(BITS_ORDER_LSB))
++# error "readhuff.h is used in conjunction with readbits.h, include that first"
++#endif
++#if !(defined(TABLEBITS) && defined(MAXSYMBOLS))
++# error "define TABLEBITS(tbl) and MAXSYMBOLS(tbl) before using readhuff.h"
++#endif
++#if !(defined(HUFF_TABLE) && defined(HUFF_LEN))
++# error "define HUFF_TABLE(tbl) and HUFF_LEN(tbl) before using readhuff.h"
++#endif
++#ifndef HUFF_ERROR
++# error "define HUFF_ERROR before using readhuff.h"
++#endif
++#ifndef HUFF_MAXBITS
++# define HUFF_MAXBITS 16
++#endif
++
++/* Decodes the next huffman symbol from the input bitstream into var.
++ * Do not use this macro on a table unless build_decode_table() succeeded.
++ */
++#define READ_HUFFSYM(tbl, var) do { \
++ ENSURE_BITS(HUFF_MAXBITS); \
++ sym = HUFF_TABLE(tbl, PEEK_BITS(TABLEBITS(tbl))); \
++ if (sym >= MAXSYMBOLS(tbl)) HUFF_TRAVERSE(tbl); \
++ (var) = sym; \
++ i = HUFF_LEN(tbl, sym); \
++ REMOVE_BITS(i); \
++} while (0)
++
++#ifdef BITS_ORDER_LSB
++# define HUFF_TRAVERSE(tbl) do { \
++ i = TABLEBITS(tbl) - 1; \
++ do { \
++ if (i++ > HUFF_MAXBITS) HUFF_ERROR; \
++ sym = HUFF_TABLE(tbl, \
++ (sym << 1) | ((bit_buffer >> i) & 1)); \
++ } while (sym >= MAXSYMBOLS(tbl)); \
++} while (0)
++#else
++#define HUFF_TRAVERSE(tbl) do { \
++ i = 1 << (BITBUF_WIDTH - TABLEBITS(tbl)); \
++ do { \
++ if ((i >>= 1) == 0) HUFF_ERROR; \
++ sym = HUFF_TABLE(tbl, \
++ (sym << 1) | ((bit_buffer & i) ? 1 : 0)); \
++ } while (sym >= MAXSYMBOLS(tbl)); \
++} while (0)
++#endif
++
++/* make_decode_table(nsyms, nbits, length[], table[])
++ *
++ * This function was originally coded by David Tritscher.
++ * It builds a fast huffman decoding table from
++ * a canonical huffman code lengths table.
++ *
++ * nsyms = total number of symbols in this huffman tree.
++ * nbits = any symbols with a code length of nbits or less can be decoded
++ * in one lookup of the table.
++ * length = A table to get code lengths from [0 to nsyms-1]
++ * table = The table to fill up with decoded symbols and pointers.
++ * Should be ((1<<nbits) + (nsyms*2)) in length.
++ *
++ * Returns 0 for OK or 1 for error
++ */
++static int make_decode_table(unsigned int nsyms, unsigned int nbits,
++ unsigned char *length, unsigned short *table)
++{
++ register unsigned short sym, next_symbol;
++ register unsigned int leaf, fill;
++#ifdef BITS_ORDER_LSB
++ register unsigned int reverse;
++#endif
++ register unsigned char bit_num;
++ unsigned int pos = 0; /* the current position in the decode table */
++ unsigned int table_mask = 1 << nbits;
++ unsigned int bit_mask = table_mask >> 1; /* don't do 0 length codes */
++
++ /* fill entries for codes short enough for a direct mapping */
++ for (bit_num = 1; bit_num <= nbits; bit_num++) {
++ for (sym = 0; sym < nsyms; sym++) {
++ if (length[sym] != bit_num) continue;
++#ifdef BITS_ORDER_MSB
++ leaf = pos;
++#else
++ /* reverse the significant bits */
++ fill = length[sym]; reverse = pos >> (nbits - fill); leaf = 0;
++ do {leaf <<= 1; leaf |= reverse & 1; reverse >>= 1;} while (--fill);
++#endif
++
++ if((pos += bit_mask) > table_mask) return 1; /* table overrun */
++
++ /* fill all possible lookups of this symbol with the symbol itself */
++#ifdef BITS_ORDER_MSB
++ for (fill = bit_mask; fill-- > 0;) table[leaf++] = sym;
++#else
++ fill = bit_mask; next_symbol = 1 << bit_num;
++ do { table[leaf] = sym; leaf += next_symbol; } while (--fill);
++#endif
++ }
++ bit_mask >>= 1;
++ }
++
++ /* exit with success if table is now complete */
++ if (pos == table_mask) return 0;
++
++ /* mark all remaining table entries as unused */
++ for (sym = pos; sym < table_mask; sym++) {
++#ifdef BITS_ORDER_MSB
++ table[sym] = 0xFFFF;
++#else
++ reverse = sym; leaf = 0; fill = nbits;
++ do { leaf <<= 1; leaf |= reverse & 1; reverse >>= 1; } while (--fill);
++ table[leaf] = 0xFFFF;
++#endif
++ }
++
++ /* next_symbol = base of allocation for long codes */
++ next_symbol = ((table_mask >> 1) < nsyms) ? nsyms : (table_mask >> 1);
++
++ /* give ourselves room for codes to grow by up to 16 more bits.
++ * codes now start at bit nbits+16 and end at (nbits+16-codelength) */
++ pos <<= 16;
++ table_mask <<= 16;
++ bit_mask = 1 << 15;
++
++ for (bit_num = nbits+1; bit_num <= HUFF_MAXBITS; bit_num++) {
++ for (sym = 0; sym < nsyms; sym++) {
++ if (length[sym] != bit_num) continue;
++
++#ifdef BITS_ORDER_MSB
++ leaf = pos >> 16;
++#else
++ /* leaf = the first nbits of the code, reversed */
++ reverse = pos >> 16; leaf = 0; fill = nbits;
++ do {leaf <<= 1; leaf |= reverse & 1; reverse >>= 1;} while (--fill);
++#endif
++ for (fill = 0; fill < (bit_num - nbits); fill++) {
++ /* if this path hasn't been taken yet, 'allocate' two entries */
++ if (table[leaf] == 0xFFFF) {
++ table[(next_symbol << 1) ] = 0xFFFF;
++ table[(next_symbol << 1) + 1 ] = 0xFFFF;
++ table[leaf] = next_symbol++;
++ }
++
++ /* follow the path and select either left or right for next bit */
++ leaf = table[leaf] << 1;
++ if ((pos >> (15-fill)) & 1) leaf++;
++ }
++ table[leaf] = sym;
++
++ if ((pos += bit_mask) > table_mask) return 1; /* table overflow */
++ }
++ bit_mask >>= 1;
++ }
++
++ /* full table? */
++ return (pos == table_mask) ? 0 : 1;
++}
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/sha.h b/libclamav/libmspack-0.4alpha/mspack/sha.h
+new file mode 100644
+index 000000000000..360521519beb
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/sha.h
+@@ -0,0 +1,15 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_LZSS_H
++#define MSPACK_LZSS_H 1
++
++/* SHA-1 message digest definitions */
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/system.c b/libclamav/libmspack-0.4alpha/mspack/system.c
+new file mode 100644
+index 000000000000..978a4d7e2357
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/system.c
+@@ -0,0 +1,239 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include <system.h>
++
++#ifndef LARGEFILE_SUPPORT
++const char *largefile_msg = "library not compiled to support large files.";
++#endif
++
++
++int mspack_version(int entity) {
++ switch (entity) {
++ /* CHM decoder version 1 -> 2 changes:
++ * - added mschmd_sec_mscompressed::spaninfo
++ * - added mschmd_header::first_pmgl
++ * - added mschmd_header::last_pmgl
++ * - added mschmd_header::chunk_cache;
++ */
++ case MSPACK_VER_MSCHMD:
++ return 2;
++ case MSPACK_VER_LIBRARY:
++ case MSPACK_VER_SYSTEM:
++ case MSPACK_VER_MSCABD:
++ case MSPACK_VER_MSSZDDD:
++ case MSPACK_VER_MSKWAJD:
++ case MSPACK_VER_MSOABD:
++ return 1;
++ case MSPACK_VER_MSCABC:
++ case MSPACK_VER_MSCHMC:
++ case MSPACK_VER_MSLITD:
++ case MSPACK_VER_MSLITC:
++ case MSPACK_VER_MSHLPD:
++ case MSPACK_VER_MSHLPC:
++ case MSPACK_VER_MSSZDDC:
++ case MSPACK_VER_MSKWAJC:
++ case MSPACK_VER_MSOABC:
++ return 0;
++ }
++ return -1;
++}
++
++int mspack_sys_selftest_internal(int offt_size) {
++ return (sizeof(off_t) == offt_size) ? MSPACK_ERR_OK : MSPACK_ERR_SEEK;
++}
++
++/* validates a system structure */
++int mspack_valid_system(struct mspack_system *sys) {
++ return (sys != NULL) && (sys->open != NULL) && (sys->close != NULL) &&
++ (sys->read != NULL) && (sys->write != NULL) && (sys->seek != NULL) &&
++ (sys->tell != NULL) && (sys->message != NULL) && (sys->alloc != NULL) &&
++ (sys->free != NULL) && (sys->copy != NULL) && (sys->null_ptr == NULL);
++}
++
++/* returns the length of a file opened for reading */
++int mspack_sys_filelen(struct mspack_system *system,
++ struct mspack_file *file, off_t *length)
++{
++ off_t current;
++
++ if (!system || !file || !length) return MSPACK_ERR_OPEN;
++
++ /* get current offset */
++ current = system->tell(file);
++
++ /* seek to end of file */
++ if (system->seek(file, (off_t) 0, MSPACK_SYS_SEEK_END)) {
++ return MSPACK_ERR_SEEK;
++ }
++
++ /* get offset of end of file */
++ *length = system->tell(file);
++
++ /* seek back to original offset */
++ if (system->seek(file, current, MSPACK_SYS_SEEK_START)) {
++ return MSPACK_ERR_SEEK;
++ }
++
++ return MSPACK_ERR_OK;
++}
++
++
++
++/* definition of mspack_default_system -- if the library is compiled with
++ * MSPACK_NO_DEFAULT_SYSTEM, no default system will be provided. Otherwise,
++ * an appropriate default system (e.g. the standard C library, or some native
++ * API calls)
++ */
++
++#ifdef MSPACK_NO_DEFAULT_SYSTEM
++struct mspack_system *mspack_default_system = NULL;
++#else
++
++/* implementation of mspack_default_system for standard C library */
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <stdarg.h>
++
++struct mspack_file_p {
++ FILE *fh;
++ const char *name;
++};
++
++static struct mspack_file *msp_open(struct mspack_system *self,
++ const char *filename, int mode)
++{
++ struct mspack_file_p *fh;
++ const char *fmode;
++
++ switch (mode) {
++ case MSPACK_SYS_OPEN_READ: fmode = "rb"; break;
++ case MSPACK_SYS_OPEN_WRITE: fmode = "wb"; break;
++ case MSPACK_SYS_OPEN_UPDATE: fmode = "r+b"; break;
++ case MSPACK_SYS_OPEN_APPEND: fmode = "ab"; break;
++ default: return NULL;
++ }
++
++ if ((fh = (struct mspack_file_p *) malloc(sizeof(struct mspack_file_p)))) {
++ fh->name = filename;
++ if ((fh->fh = fopen(filename, fmode))) return (struct mspack_file *) fh;
++ free(fh);
++ }
++ return NULL;
++}
++
++static void msp_close(struct mspack_file *file) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self) {
++ fclose(self->fh);
++ free(self);
++ }
++}
++
++static int msp_read(struct mspack_file *file, void *buffer, int bytes) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self && buffer && bytes >= 0) {
++ size_t count = fread(buffer, 1, (size_t) bytes, self->fh);
++ if (!ferror(self->fh)) return (int) count;
++ }
++ return -1;
++}
++
++static int msp_write(struct mspack_file *file, void *buffer, int bytes) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self && buffer && bytes >= 0) {
++ size_t count = fwrite(buffer, 1, (size_t) bytes, self->fh);
++ if (!ferror(self->fh)) return (int) count;
++ }
++ return -1;
++}
++
++static int msp_seek(struct mspack_file *file, off_t offset, int mode) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self) {
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START: mode = SEEK_SET; break;
++ case MSPACK_SYS_SEEK_CUR: mode = SEEK_CUR; break;
++ case MSPACK_SYS_SEEK_END: mode = SEEK_END; break;
++ default: return -1;
++ }
++#ifdef HAVE_FSEEKO
++ return fseeko(self->fh, offset, mode);
++#else
++ return fseek(self->fh, offset, mode);
++#endif
++ }
++ return -1;
++}
++
++static off_t msp_tell(struct mspack_file *file) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++#ifdef HAVE_FSEEKO
++ return (self) ? (off_t) ftello(self->fh) : 0;
++#else
++ return (self) ? (off_t) ftell(self->fh) : 0;
++#endif
++}
++
++static void msp_msg(struct mspack_file *file, const char *format, ...) {
++ va_list ap;
++ if (file) fprintf(stderr, "%s: ", ((struct mspack_file_p *) file)->name);
++ va_start(ap, format);
++ vfprintf(stderr, format, ap);
++ va_end(ap);
++ fputc((int) '\n', stderr);
++ fflush(stderr);
++}
++
++static void *msp_alloc(struct mspack_system *self, size_t bytes) {
++#ifdef DEBUG
++ /* make uninitialised data obvious */
++ char *buf = malloc(bytes + 8);
++ if (buf) memset(buf, 0xDC, bytes);
++ *((size_t *)buf) = bytes;
++ return &buf[8];
++#else
++ return malloc(bytes);
++#endif
++}
++
++static void msp_free(void *buffer) {
++#ifdef DEBUG
++ char *buf = buffer;
++ size_t bytes;
++ if (buf) {
++ buf -= 8;
++ bytes = *((size_t *)buf);
++ /* make freed data obvious */
++ memset(buf, 0xED, bytes);
++ free(buf);
++ }
++#else
++ free(buffer);
++#endif
++}
++
++static void msp_copy(void *src, void *dest, size_t bytes) {
++ memcpy(dest, src, bytes);
++}
++
++static struct mspack_system msp_system = {
++ &msp_open, &msp_close, &msp_read, &msp_write, &msp_seek,
++ &msp_tell, &msp_msg, &msp_alloc, &msp_free, &msp_copy, NULL
++};
++
++struct mspack_system *mspack_default_system = &msp_system;
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/system.h b/libclamav/libmspack-0.4alpha/mspack/system.h
+new file mode 100644
+index 000000000000..4a400850aa52
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/system.h
+@@ -0,0 +1,124 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_SYSTEM_H
++#define MSPACK_SYSTEM_H 1
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* ensure config.h is read before mspack.h */
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include <mspack.h>
++
++/* fix for problem with GCC 4 and glibc (thanks to Ville Skytta)
++ * http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=150429
++ */
++#ifdef read
++# undef read
++#endif
++
++#ifdef DEBUG
++# include <stdio.h>
++/* Old GCCs don't have __func__, but __FUNCTION__:
++ * http://gcc.gnu.org/onlinedocs/gcc/Function-Names.html
++ */
++# if __STDC_VERSION__ < 199901L
++# if __GNUC__ >= 2
++# define __func__ __FUNCTION__
++# else
++# define __func__ "<unknown>"
++# endif
++# endif
++# define D(x) do { printf("%s:%d (%s) ",__FILE__, __LINE__, __func__); \
++ printf x ; fputc('\n', stdout); fflush(stdout);} while (0);
++#else
++# define D(x)
++#endif
++
++/* CAB supports searching through files over 4GB in size, and the CHM file
++ * format actively uses 64-bit offsets. These can only be fully supported
++ * if the system the code runs on supports large files. If not, the library
++ * will work as normal using only 32-bit arithmetic, but if an offset
++ * greater than 2GB is detected, an error message indicating the library
++ * can't support the file should be printed.
++ */
++#ifdef HAVE_LIMITS_H
++# include <limits.h>
++#endif
++
++#if ((defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS >= 64) || \
++ (defined(FILESIZEBITS) && FILESIZEBITS >= 64) || \
++ (defined(SIZEOF_OFF_T) && SIZEOF_OFF_T >= 8) || \
++ defined(_LARGEFILE_SOURCE) || defined(_LARGEFILE64_SOURCE))
++# define LARGEFILE_SUPPORT
++# define LD "lld"
++# define LU "llu"
++#else
++extern const char *largefile_msg;
++# define LD "ld"
++# define LU "lu"
++#endif
++
++/* endian-neutral reading of little-endian data */
++#define __egi32(a,n) ( ((((unsigned char *) a)[n+3]) << 24) | \
++ ((((unsigned char *) a)[n+2]) << 16) | \
++ ((((unsigned char *) a)[n+1]) << 8) | \
++ ((((unsigned char *) a)[n+0])))
++#define EndGetI64(a) ((((unsigned long long int) __egi32(a,4)) << 32) | \
++ ((unsigned int) __egi32(a,0)))
++#define EndGetI32(a) __egi32(a,0)
++#define EndGetI16(a) ((((a)[1])<<8)|((a)[0]))
++
++/* endian-neutral reading of big-endian data */
++#define EndGetM32(a) (((((unsigned char *) a)[0]) << 24) | \
++ ((((unsigned char *) a)[1]) << 16) | \
++ ((((unsigned char *) a)[2]) << 8) | \
++ ((((unsigned char *) a)[3])))
++#define EndGetM16(a) ((((a)[0])<<8)|((a)[1]))
++
++extern struct mspack_system *mspack_default_system;
++
++/* returns the length of a file opened for reading */
++extern int mspack_sys_filelen(struct mspack_system *system,
++ struct mspack_file *file, off_t *length);
++
++/* validates a system structure */
++extern int mspack_valid_system(struct mspack_system *sys);
++
++#if HAVE_STRINGS_H
++# include <strings.h>
++#endif
++
++#if HAVE_STRING_H
++# include <string.h>
++#endif
++
++#if HAVE_MEMCMP
++# define mspack_memcmp memcmp
++#else
++/* inline memcmp() */
++static inline int mspack_memcmp(const void *s1, const void *s2, size_t n) {
++ unsigned char *c1 = (unsigned char *) s1;
++ unsigned char *c2 = (unsigned char *) s2;
++ if (n == 0) return 0;
++ while (--n && (*c1 == *c2)) c1++, c2++;
++ return *c1 - *c2;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/szdd.h b/libclamav/libmspack-0.4alpha/mspack/szdd.h
+new file mode 100644
+index 000000000000..e07c6b7c8edd
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/szdd.h
+@@ -0,0 +1,39 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++#ifndef MSPACK_SZDD_H
++#define MSPACK_SZDD_H 1
++
++#include <lzss.h>
++
++/* input buffer size during decompression - not worth parameterising IMHO */
++#define SZDD_INPUT_SIZE (2048)
++
++/* SZDD compression definitions */
++
++struct msszdd_compressor_p {
++ struct msszdd_compressor base;
++ struct mspack_system *system;
++ int error;
++};
++
++/* SZDD decompression definitions */
++
++struct msszdd_decompressor_p {
++ struct msszdd_decompressor base;
++ struct mspack_system *system;
++ int error;
++};
++
++struct msszddd_header_p {
++ struct msszddd_header base;
++ struct mspack_file *fh;
++};
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/mspack/szddc.c b/libclamav/libmspack-0.4alpha/mspack/szddc.c
+new file mode 100644
+index 000000000000..cdd39a630532
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/szddc.c
+@@ -0,0 +1,24 @@
++/* This file is part of libmspack.
++ * (C) 2003-2004 Stuart Caie.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* SZDD compression implementation */
++
++#include <system.h>
++#include <szdd.h>
++
++struct msszdd_compressor *
++ mspack_create_szdd_compressor(struct mspack_system *sys)
++{
++ /* todo */
++ return NULL;
++}
++
++void mspack_destroy_szdd_compressor(struct msszdd_compressor *self) {
++ /* todo */
++}
+diff --git a/libclamav/libmspack-0.4alpha/mspack/szddd.c b/libclamav/libmspack-0.4alpha/mspack/szddd.c
+new file mode 100644
+index 000000000000..99c5aa465852
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/mspack/szddd.c
+@@ -0,0 +1,247 @@
++/* This file is part of libmspack.
++ * (C) 2003-2010 Stuart Caie.
++ *
++ * SZDD is a format used in the MS-DOS commands COMPRESS.EXE and
++ * EXPAND.EXE. The compression method is attributed to Steven Zeck,
++ * however it's pretty much identical to LZSS.
++ *
++ * libmspack is free software; you can redistribute it and/or modify it under
++ * the terms of the GNU Lesser General Public License (LGPL) version 2.1
++ *
++ * For further details, see the file COPYING.LIB distributed with libmspack
++ */
++
++/* SZDD decompression implementation */
++
++#include <system.h>
++#include <szdd.h>
++
++/* prototypes */
++static struct msszddd_header *szddd_open(
++ struct msszdd_decompressor *base, const char *filename);
++static void szddd_close(
++ struct msszdd_decompressor *base, struct msszddd_header *hdr);
++static int szddd_read_headers(
++ struct mspack_system *sys, struct mspack_file *fh,
++ struct msszddd_header *hdr);
++static int szddd_extract(
++ struct msszdd_decompressor *base, struct msszddd_header *hdr,
++ const char *filename);
++static int szddd_decompress(
++ struct msszdd_decompressor *base, const char *input, const char *output);
++static int szddd_error(
++ struct msszdd_decompressor *base);
++
++/***************************************
++ * MSPACK_CREATE_SZDD_DECOMPRESSOR
++ ***************************************
++ * constructor
++ */
++struct msszdd_decompressor *
++ mspack_create_szdd_decompressor(struct mspack_system *sys)
++{
++ struct msszdd_decompressor_p *self = NULL;
++
++ if (!sys) sys = mspack_default_system;
++ if (!mspack_valid_system(sys)) return NULL;
++
++ if ((self = (struct msszdd_decompressor_p *) sys->alloc(sys, sizeof(struct msszdd_decompressor_p)))) {
++ self->base.open = &szddd_open;
++ self->base.close = &szddd_close;
++ self->base.extract = &szddd_extract;
++ self->base.decompress = &szddd_decompress;
++ self->base.last_error = &szddd_error;
++ self->system = sys;
++ self->error = MSPACK_ERR_OK;
++ }
++ return (struct msszdd_decompressor *) self;
++}
++
++/***************************************
++ * MSPACK_DESTROY_SZDD_DECOMPRESSOR
++ ***************************************
++ * destructor
++ */
++void mspack_destroy_szdd_decompressor(struct msszdd_decompressor *base)
++{
++ struct msszdd_decompressor_p *self = (struct msszdd_decompressor_p *) base;
++ if (self) {
++ struct mspack_system *sys = self->system;
++ sys->free(self);
++ }
++}
++
++/***************************************
++ * SZDDD_OPEN
++ ***************************************
++ * opens an SZDD file without decompressing, reads header
++ */
++static struct msszddd_header *szddd_open(struct msszdd_decompressor *base,
++ const char *filename)
++{
++ struct msszdd_decompressor_p *self = (struct msszdd_decompressor_p *) base;
++ struct msszddd_header *hdr;
++ struct mspack_system *sys;
++ struct mspack_file *fh;
++
++ if (!self) return NULL;
++ sys = self->system;
++
++ fh = sys->open(sys, filename, MSPACK_SYS_OPEN_READ);
++ hdr = (struct msszddd_header *) sys->alloc(sys, sizeof(struct msszddd_header_p));
++ if (fh && hdr) {
++ ((struct msszddd_header_p *) hdr)->fh = fh;
++ self->error = szddd_read_headers(sys, fh, hdr);
++ }
++ else {
++ if (!fh) self->error = MSPACK_ERR_OPEN;
++ if (!hdr) self->error = MSPACK_ERR_NOMEMORY;
++ }
++
++ if (self->error) {
++ if (fh) sys->close(fh);
++ if (hdr) sys->free(hdr);
++ hdr = NULL;
++ }
++
++ return hdr;
++}
++
++/***************************************
++ * SZDDD_CLOSE
++ ***************************************
++ * closes an SZDD file
++ */
++static void szddd_close(struct msszdd_decompressor *base,
++ struct msszddd_header *hdr)
++{
++ struct msszdd_decompressor_p *self = (struct msszdd_decompressor_p *) base;
++ struct msszddd_header_p *hdr_p = (struct msszddd_header_p *) hdr;
++
++ if (!self || !self->system) return;
++
++ /* close the file handle associated */
++ self->system->close(hdr_p->fh);
++
++ /* free the memory associated */
++ self->system->free(hdr);
++
++ self->error = MSPACK_ERR_OK;
++}
++
++/***************************************
++ * SZDDD_READ_HEADERS
++ ***************************************
++ * reads the headers of an SZDD format file
++ */
++static unsigned char szdd_signature_expand[8] = {
++ 0x53, 0x5A, 0x44, 0x44, 0x88, 0xF0, 0x27, 0x33
++};
++static unsigned char szdd_signature_qbasic[8] = {
++ 0x53, 0x5A, 0x20, 0x88, 0xF0, 0x27, 0x33, 0xD1
++};
++
++static int szddd_read_headers(struct mspack_system *sys,
++ struct mspack_file *fh,
++ struct msszddd_header *hdr)
++{
++ unsigned char buf[8];
++
++ /* read and check signature */
++ if (sys->read(fh, buf, 8) != 8) return MSPACK_ERR_READ;
++
++ if ((mspack_memcmp(buf, szdd_signature_expand, 8) == 0)) {
++ /* common SZDD */
++ hdr->format = MSSZDD_FMT_NORMAL;
++
++ /* read the rest of the header */
++ if (sys->read(fh, buf, 6) != 6) return MSPACK_ERR_READ;
++ if (buf[0] != 0x41) return MSPACK_ERR_DATAFORMAT;
++ hdr->missing_char = buf[1];
++ hdr->length = EndGetI32(&buf[2]);
++ }
++ else if ((mspack_memcmp(buf, szdd_signature_qbasic, 8) == 0)) {
++ /* special QBasic SZDD */
++ hdr->format = MSSZDD_FMT_QBASIC;
++ if (sys->read(fh, buf, 4) != 4) return MSPACK_ERR_READ;
++ hdr->missing_char = '\0';
++ hdr->length = EndGetI32(buf);
++ }
++ else {
++ return MSPACK_ERR_SIGNATURE;
++ }
++ return MSPACK_ERR_OK;
++}
++
++/***************************************
++ * SZDDD_EXTRACT
++ ***************************************
++ * decompresses an SZDD file
++ */
++static int szddd_extract(struct msszdd_decompressor *base,
++ struct msszddd_header *hdr, const char *filename)
++{
++ struct msszdd_decompressor_p *self = (struct msszdd_decompressor_p *) base;
++ struct mspack_file *fh, *outfh;
++ struct mspack_system *sys;
++ off_t data_offset;
++
++ if (!self) return MSPACK_ERR_ARGS;
++ if (!hdr) return self->error = MSPACK_ERR_ARGS;
++ sys = self->system;
++
++ fh = ((struct msszddd_header_p *) hdr)->fh;
++
++ /* seek to the compressed data */
++ data_offset = (hdr->format == MSSZDD_FMT_NORMAL) ? 14 : 12;
++ if (sys->seek(fh, data_offset, MSPACK_SYS_SEEK_START)) {
++ return self->error = MSPACK_ERR_SEEK;
++ }
++
++ /* open file for output */
++ if (!(outfh = sys->open(sys, filename, MSPACK_SYS_OPEN_WRITE))) {
++ return self->error = MSPACK_ERR_OPEN;
++ }
++
++ /* decompress the data */
++ self->error = lzss_decompress(sys, fh, outfh, SZDD_INPUT_SIZE,
++ hdr->format == MSSZDD_FMT_NORMAL
++ ? LZSS_MODE_EXPAND
++ : LZSS_MODE_QBASIC);
++
++ /* close output file */
++ sys->close(outfh);
++
++ return self->error;
++}
++
++/***************************************
++ * SZDDD_DECOMPRESS
++ ***************************************
++ * unpacks directly from input to output
++ */
++static int szddd_decompress(struct msszdd_decompressor *base,
++ const char *input, const char *output)
++{
++ struct msszdd_decompressor_p *self = (struct msszdd_decompressor_p *) base;
++ struct msszddd_header *hdr;
++ int error;
++
++ if (!self) return MSPACK_ERR_ARGS;
++
++ if (!(hdr = szddd_open(base, input))) return self->error;
++ error = szddd_extract(base, hdr, output);
++ szddd_close(base, hdr);
++ return self->error = error;
++}
++
++/***************************************
++ * SZDDD_ERROR
++ ***************************************
++ * returns the last error that occurred
++ */
++static int szddd_error(struct msszdd_decompressor *base)
++{
++ struct msszdd_decompressor_p *self = (struct msszdd_decompressor_p *) base;
++ return (self) ? self->error : MSPACK_ERR_ARGS;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/cabd_md5.c b/libclamav/libmspack-0.4alpha/test/cabd_md5.c
+new file mode 100644
+index 000000000000..6a00dbda3f0d
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/cabd_md5.c
+@@ -0,0 +1,161 @@
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++#include <sys/stat.h>
++#include <dirent.h>
++
++#include <md5_fh.h>
++#include <error.h>
++
++/**
++ * Matches a cabinet's filename case-insensitively in the filesystem and
++ * returns the case-correct form.
++ *
++ * @param origcab if this is non-NULL, the pathname part of this filename
++ * will be extracted, and the search will be conducted in
++ * that directory.
++ * @param cabname the internal CAB filename to search for.
++ * @return a copy of the full, case-correct filename of the given cabinet
++ * filename, or NULL if the specified filename does not exist on disk.
++ */
++static char *find_cabinet_file(char *origcab, char *cabname) {
++ struct dirent *entry;
++ struct stat st_buf;
++ int found = 0, len;
++ char *tail, *cab;
++ DIR *dir;
++
++ /* ensure we have a cabinet name at all */
++ if (!cabname || !cabname[0]) return NULL;
++
++ /* find if there's a directory path in the origcab */
++ tail = origcab ? strrchr(origcab, '/') : NULL;
++ len = (tail - origcab) + 1;
++
++ /* allocate memory for our copy */
++ if (!(cab = (char *) malloc((tail ? len : 2) + strlen(cabname) + 1))) return NULL;
++
++ /* add the directory path from the original cabinet name, or "." */
++ if (tail) memcpy(cab, origcab, (size_t) len);
++ else cab[0]='.', cab[1]='/', len=2;
++ cab[len] = '\0';
++
++ /* try accessing the cabinet with its current name (case-sensitive) */
++ strcpy(&cab[len], cabname);
++ if (stat(cab, &st_buf) == 0) {
++ found = 1;
++ }
++ else {
++ /* cabinet was not found, look for it in the current dir */
++ cab[len] = '\0';
++ if ((dir = opendir(cab))) {
++ while ((entry = readdir(dir))) {
++ if (strcasecmp(cabname, entry->d_name) == 0) {
++ strcat(cab, entry->d_name);
++ found = (stat(cab, &st_buf) == 0);
++ break;
++ }
++ }
++ closedir(dir);
++ }
++ }
++
++ if (!found || !S_ISREG(st_buf.st_mode)) {
++ /* cabinet not found, or not a regular file */
++ free(cab);
++ cab = NULL;
++ }
++
++ return cab;
++}
++
++
++int main(int argc, char *argv[]) {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab, *c, *c2;
++ struct mscabd_file *file;
++ char *cabname, *newname;
++ int err;
++
++ setbuf(stdout, NULL);
++ setbuf(stderr, NULL);
++
++ /* if self-test reveals an error */
++ MSPACK_SYS_SELFTEST(err);
++ if (err) return 1;
++
++ if (!(cabd = mspack_create_cab_decompressor(&read_files_write_md5))) {
++ fprintf(stderr, "can't make decompressor\n");
++ return 1;
++ }
++
++ for (argv++; (cabname = *argv); argv++) {
++ printf("*** %s\n", cabname);
++
++ if (!(cab = cabd->open(cabd, cabname))) {
++ fprintf(stderr, "cab open error: %s\n", ERROR(cabd));
++ continue;
++ }
++
++ /* prepend any spanning cabinets */
++ for (c = cab; c && (c->flags & MSCAB_HDR_PREVCAB); c = c->prevcab) {
++ if (!(newname = find_cabinet_file(cabname, c->prevname))) {
++ fprintf(stderr, "%s: can't find \"%s\" to prepend\n",
++ cabname, c->prevname);
++ break;
++ }
++ if (!(c2 = cabd->open(cabd, newname))) {
++ fprintf(stderr, "%s: error opening \"%s\" for prepend: %s\n",
++ cabname, newname, ERROR(cabd));
++ break;
++ }
++ if (cabd->prepend(cabd, c, c2) != MSPACK_ERR_OK) {
++ fprintf(stderr, "%s: error prepending \"%s\": %s\n",
++ cabname, newname, ERROR(cabd));
++ break;
++ }
++ }
++
++ /* append any spanning cabinets */
++ for (c = cab; c && (c->flags & MSCAB_HDR_NEXTCAB); c = c->nextcab) {
++ if (!(newname = find_cabinet_file(cabname, c->nextname))) {
++ fprintf(stderr, "%s: can't find \"%s\" to append\n",
++ cabname, c->nextname);
++ break;
++ }
++ if (!(c2 = cabd->open(cabd, newname))) {
++ fprintf(stderr, "%s: error opening \"%s\" for append: %s\n",
++ cabname, newname, ERROR(cabd));
++ break;
++ }
++ if (cabd->append(cabd, c, c2) != MSPACK_ERR_OK) {
++ fprintf(stderr, "%s: error appending \"%s\": %s\n",
++ cabname, newname, ERROR(cabd));
++ break;
++ }
++ }
++
++ /* extract files */
++ for (file = cab->files; file; file = file->next ) {
++ if (cabd->extract(cabd, file, NULL) == MSPACK_ERR_OK) {
++ printf("%s %s\n", md5_string, file->filename);
++ }
++ else {
++ fprintf(stderr, "%s: error extracting \"%s\": %s\n",
++ cabname, file->filename, ERROR(cabd));
++ }
++ }
++
++ /* free all resources */
++ for (c2 = cab->prevcab; c2; c2 = c2->prevcab) free((void*)c2->filename);
++ for (c2 = cab->nextcab; c2; c2 = c2->nextcab) free((void*)c2->filename);
++ cabd->close(cabd, cab);
++ }
++ mspack_destroy_cab_decompressor(cabd);
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/cabd_memory.c b/libclamav/libmspack-0.4alpha/test/cabd_memory.c
+new file mode 100644
+index 000000000000..f7a78972c8e4
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/cabd_memory.c
+@@ -0,0 +1,179 @@
++/* An implementation of the mspack_system interface using only memory */
++
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++
++/* use a pointer to a mem_buf structure as "filenames" */
++struct mem_buf {
++ void *data;
++ size_t length;
++};
++
++struct mem_file {
++ char *data;
++ size_t length, posn;
++};
++
++static void *mem_alloc(struct mspack_system *self, size_t bytes) {
++ /* put your memory allocator here */
++ return malloc(bytes);
++}
++
++static void mem_free(void *buffer) {
++ /* put your memory deallocator here */
++ free(buffer);
++}
++
++static void mem_copy(void *src, void *dest, size_t bytes) {
++ /* put your own memory copy routine here */
++ memcpy(dest, src, bytes);
++}
++
++static void mem_msg(struct mem_file *file, const char *format, ...) {
++ /* put your own printf-type routine here, or leave it empty */
++}
++
++static struct mem_file *mem_open(struct mspack_system *self,
++ struct mem_buf *fn, int mode)
++{
++ struct mem_file *fh;
++ if (!fn || !fn->data || !fn->length) return NULL;
++ if ((fh = (struct mem_file *) mem_alloc(self, sizeof(struct mem_file)))) {
++ fh->data = (char *) fn->data;
++ fh->length = fn->length;
++ fh->posn = (mode == MSPACK_SYS_OPEN_APPEND) ? fn->length : 0;
++ }
++ return fh;
++}
++
++static void mem_close(struct mem_file *fh) {
++ if (fh) mem_free(fh);
++}
++
++static int mem_read(struct mem_file *fh, void *buffer, int bytes) {
++ int todo;
++ if (!fh || !buffer || bytes < 0) return -1;
++ todo = fh->length - fh->posn;
++ if (todo > bytes) todo = bytes;
++ if (todo > 0) mem_copy(&fh->data[fh->posn], buffer, (size_t) todo);
++ fh->posn += todo; return todo;
++}
++
++static int mem_write(struct mem_file *fh, void *buffer, int bytes) {
++ int todo;
++ if (!fh || !buffer || bytes < 0) return -1;
++ todo = fh->length - fh->posn;
++ if (todo > bytes) todo = bytes;
++ if (todo > 0) mem_copy(buffer, &fh->data[fh->posn], (size_t) todo);
++ fh->posn += todo; return todo;
++}
++
++static int mem_seek(struct mem_file *fh, off_t offset, int mode) {
++ if (!fh) return 1;
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START: break;
++ case MSPACK_SYS_SEEK_CUR: offset += (off_t) fh->posn; break;
++ case MSPACK_SYS_SEEK_END: offset += (off_t) fh->length; break;
++ default: return 1;
++ }
++ if ((offset < 0) || (offset > (off_t) fh->length)) return 1;
++ fh->posn = (size_t) offset;
++ return 0;
++}
++
++static off_t mem_tell(struct mem_file *fh) {
++ return (fh) ? (off_t) fh->posn : -1;
++}
++
++static struct mspack_system mem_system = {
++ (struct mspack_file * (*)(struct mspack_system *, const char *, int)) &mem_open,
++ (void (*)(struct mspack_file *)) &mem_close,
++ (int (*)(struct mspack_file *, void *, int)) &mem_read,
++ (int (*)(struct mspack_file *, void *, int)) &mem_write,
++ (int (*)(struct mspack_file *, off_t, int)) &mem_seek,
++ (off_t (*)(struct mspack_file *)) &mem_tell,
++ (void (*)(struct mspack_file *, const char *, ...)) &mem_msg,
++ &mem_alloc,
++ &mem_free,
++ &mem_copy,
++ NULL
++};
++
++/* example of usage with mscab_decompressor */
++
++/* a simple cabinet */
++static unsigned char embedded_cab[] = {
++ 0x4D,0x53,0x43,0x46,0x00,0x00,0x00,0x00,0xFD,0x00,0x00,0x00,0x00,0x00,0x00,
++ 0x00,0x2C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0x01,0x00,0x02,0x00,
++ 0x00,0x00,0x22,0x06,0x00,0x00,0x5E,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x4D,
++ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x6C,0x22,0xBA,0x59,0x20,0x00,
++ 0x68,0x65,0x6C,0x6C,0x6F,0x2E,0x63,0x00,0x4A,0x00,0x00,0x00,0x4D,0x00,0x00,
++ 0x00,0x00,0x00,0x6C,0x22,0xE7,0x59,0x20,0x00,0x77,0x65,0x6C,0x63,0x6F,0x6D,
++ 0x65,0x2E,0x63,0x00,0xBD,0x5A,0xA6,0x30,0x97,0x00,0x97,0x00,0x23,0x69,0x6E,
++ 0x63,0x6C,0x75,0x64,0x65,0x20,0x3C,0x73,0x74,0x64,0x69,0x6F,0x2E,0x68,0x3E,
++ 0x0D,0x0A,0x0D,0x0A,0x76,0x6F,0x69,0x64,0x20,0x6D,0x61,0x69,0x6E,0x28,0x76,
++ 0x6F,0x69,0x64,0x29,0x0D,0x0A,0x7B,0x0D,0x0A,0x20,0x20,0x20,0x20,0x70,0x72,
++ 0x69,0x6E,0x74,0x66,0x28,0x22,0x48,0x65,0x6C,0x6C,0x6F,0x2C,0x20,0x77,0x6F,
++ 0x72,0x6C,0x64,0x21,0x5C,0x6E,0x22,0x29,0x3B,0x0D,0x0A,0x7D,0x0D,0x0A,0x23,
++ 0x69,0x6E,0x63,0x6C,0x75,0x64,0x65,0x20,0x3C,0x73,0x74,0x64,0x69,0x6F,0x2E,
++ 0x68,0x3E,0x0D,0x0A,0x0D,0x0A,0x76,0x6F,0x69,0x64,0x20,0x6D,0x61,0x69,0x6E,
++ 0x28,0x76,0x6F,0x69,0x64,0x29,0x0D,0x0A,0x7B,0x0D,0x0A,0x20,0x20,0x20,0x20,
++ 0x70,0x72,0x69,0x6E,0x74,0x66,0x28,0x22,0x57,0x65,0x6C,0x63,0x6F,0x6D,0x65,
++ 0x21,0x5C,0x6E,0x22,0x29,0x3B,0x0D,0x0A,0x7D,0x0D,0x0A,0x0D,0x0A
++};
++
++int main() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++ struct mscabd_file *file;
++ struct mem_buf source = { &embedded_cab[0], sizeof(embedded_cab) };
++ struct mem_buf output;
++ int err;
++
++ /* if self-test reveals an error */
++ MSPACK_SYS_SELFTEST(err);
++ if (err) return 1;
++
++ /* create a cab decompressor using our custom mspack_system interface */
++ if ((cabd = mspack_create_cab_decompressor(&mem_system))) {
++
++ /* open a cab file direct from memory */
++ if ((cab = cabd->open(cabd, (char *) &source))) {
++
++ /* for all files */
++ for (file = cab->files; file; file = file->next) {
++ /* fill out our "filename" (memory pointer and length) */
++ output.data = (char *) malloc(file->length);
++ output.length = file->length;
++
++ /* let cabd extract this file to our memory buffer */
++ if (output.data && cabd->extract(cabd, file, (char *) &output)) {
++ exit(1);
++ }
++
++ /* dump the memory buffer to stdout (for display purposes) */
++ printf("Filename: %s\nContents:\n", file->filename);
++ fwrite(output.data, 1, output.length, stdout);
++
++ /* free our buffer */
++ free(output.data);
++ }
++ cabd->close(cabd, cab);
++ }
++ else {
++ fprintf(stderr, "can't open cabinet (%d)\n", cabd->last_error(cabd));
++ }
++ mspack_destroy_cab_decompressor(cabd);
++ }
++ else {
++ fprintf(stderr, "can't make decompressor\n");
++ }
++ return 0;
++
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/cabd_test.c b/libclamav/libmspack-0.4alpha/test/cabd_test.c
+new file mode 100644
+index 000000000000..5e8851ce9f0e
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/cabd_test.c
+@@ -0,0 +1,386 @@
++/* cabinet decompression regression test suite */
++
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++
++unsigned int test_count = 0;
++
++#define TEST(x) do {\
++ test_count++; \
++ if (!(x)) {printf("%s:%d FAILED %s\n",__FUNCTION__,__LINE__,#x);exit(1);} \
++} while (0)
++
++/* open where cab file doesn't exist */
++void cabd_open_test_01() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cab = cabd->open(cabd, "!!!FILE_WHICH_DOES_NOT_EXIST");
++ TEST(cab == NULL);
++ TEST(cabd->last_error(cabd) == MSPACK_ERR_OPEN);
++
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* normal cab file with 2 files and one folder.
++ * check ALL headers are read correctly */
++void cabd_open_test_02() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++ struct mscabd_folder *folder;
++ struct mscabd_file *file;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cab = cabd->open(cabd, "test_files/cabd/normal_2files_1folder.cab");
++ TEST(cab != NULL);
++
++ TEST(cab->next == NULL);
++ TEST(cab->base_offset == 0);
++ TEST(cab->length == 253);
++ TEST(cab->prevcab == NULL); TEST(cab->nextcab == NULL);
++ TEST(cab->prevname == NULL); TEST(cab->nextname == NULL);
++ TEST(cab->previnfo == NULL); TEST(cab->nextinfo == NULL);
++ TEST(cab->set_id = 1570); TEST(cab->set_index == 0);
++ TEST(cab->header_resv == 0);
++ TEST(cab->flags == 0);
++
++ folder = cab->folders;
++ TEST(folder != NULL);
++ TEST(folder->next == NULL);
++ TEST(folder->comp_type == 0);
++ TEST(folder->num_blocks == 1);
++
++ file = cab->files;
++ TEST(file != NULL);
++ TEST(strcmp(file->filename, "hello.c") == 0);
++ TEST(file->length == 77);
++ TEST(file->attribs == 0x20);
++ TEST(file->time_h == 11);TEST(file->time_m == 13);TEST(file->time_s == 52);
++ TEST(file->date_d == 12);TEST(file->date_m == 3);TEST(file->date_y == 1997);
++ TEST(file->folder == folder); TEST(file->offset == 0);
++
++ file = file->next;
++ TEST(file != NULL);
++ TEST(strcmp(file->filename, "welcome.c") == 0);
++ TEST(file->length == 74);
++ TEST(file->attribs == 0x20);
++ TEST(file->time_h == 11);TEST(file->time_m == 15);TEST(file->time_s == 14);
++ TEST(file->date_d == 12);TEST(file->date_m == 3);TEST(file->date_y == 1997);
++ TEST(file->folder == folder); TEST(file->offset == 77);
++
++ cabd->close(cabd, cab);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* cabs with reserve headers set, ensure they all load correctly */
++void cabd_open_test_03() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++ unsigned int i;
++ const char *files[] = {
++ "test_files/cabd/reserve_---.cab",
++ "test_files/cabd/reserve_--D.cab",
++ "test_files/cabd/reserve_-F-.cab",
++ "test_files/cabd/reserve_-FD.cab",
++ "test_files/cabd/reserve_H--.cab",
++ "test_files/cabd/reserve_H-D.cab",
++ "test_files/cabd/reserve_HF-.cab",
++ "test_files/cabd/reserve_HFD.cab"
++ };
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ for (i = 0; i < (sizeof(files)/sizeof(char *)); i++) {
++ cab = cabd->open(cabd, files[i]);
++ TEST(cab != NULL);
++ TEST(cab->files != NULL);
++ TEST(cab->files->next != NULL);
++ TEST(strcmp(cab->files->filename, "test1.txt") == 0);
++ TEST(strcmp(cab->files->next->filename, "test2.txt") == 0);
++ cabd->close(cabd, cab);
++ }
++
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* some bad cabs, should not load */
++void cabd_open_test_04() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ /* cab has enough data for a header, but does not contain real cab data
++ * result should be MSPACK_ERR_SIGNATURE */
++ cab = cabd->open(cabd, "test_files/cabd/bad_signature.cab");
++ TEST(cab == NULL);
++
++ /* cab has 0 folders */
++ cab = cabd->open(cabd, "test_files/cabd/bad_nofolders.cab");
++ TEST(cab == NULL);
++
++ /* cab has 0 files */
++ cab = cabd->open(cabd, "test_files/cabd/bad_nofiles.cab");
++ TEST(cab == NULL);
++
++ /* second file in the cab has a folder index for a non-existant folder */
++ cab = cabd->open(cabd, "test_files/cabd/bad_folderindex.cab");
++ TEST(cab == NULL);
++
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* cabs which have been cut short
++ * result should be MSPACK_ERR_READ for missing headers or
++ * MSPACK_ERR_DATAFORMAT for missing/partial strings.
++ * If only data blocks are missing, the cab should open()
++ */
++void cabd_open_test_05() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++ unsigned int i;
++ const char *files[] = {
++ "test_files/cabd/partial_shortheader.cab",
++ "test_files/cabd/partial_shortextheader.cab",
++ "test_files/cabd/partial_nofolder.cab",
++ "test_files/cabd/partial_shortfolder.cab",
++ "test_files/cabd/partial_nofiles.cab",
++ "test_files/cabd/partial_shortfile1.cab",
++ "test_files/cabd/partial_shortfile2.cab"
++ };
++ const char *str_files[] = {
++ "test_files/cabd/partial_str_nopname.cab",
++ "test_files/cabd/partial_str_shortpname.cab",
++ "test_files/cabd/partial_str_nopinfo.cab",
++ "test_files/cabd/partial_str_shortpinfo.cab",
++ "test_files/cabd/partial_str_nonname.cab",
++ "test_files/cabd/partial_str_shortnname.cab",
++ "test_files/cabd/partial_str_noninfo.cab",
++ "test_files/cabd/partial_str_shortninfo.cab",
++ "test_files/cabd/partial_str_nofname.cab",
++ "test_files/cabd/partial_str_shortfname.cab",
++ };
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ for (i = 0; i < (sizeof(files)/sizeof(char *)); i++) {
++ cab = cabd->open(cabd, files[i]);
++ TEST(cab == NULL);
++ TEST(cabd->last_error(cabd) == MSPACK_ERR_READ);
++ }
++
++ for (i = 0; i < (sizeof(str_files)/sizeof(char *)); i++) {
++ cab = cabd->open(cabd, str_files[i]);
++ TEST(cab == NULL);
++ TEST(cabd->last_error(cabd) == MSPACK_ERR_DATAFORMAT);
++ }
++
++ /* lack of data blocks should NOT be a problem for merely reading */
++ cab = cabd->open(cabd, "test_files/cabd/partial_nodata.cab");
++ TEST(cab != NULL);
++
++ cabd->close(cabd, cab);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* open cab with 255 character filename (maximum allowed) */
++void cabd_open_test_06() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cab = cabd->open(cabd, "test_files/cabd/normal_255c_filename.cab");
++ TEST(cab != NULL);
++
++ cabd->close(cabd, cab);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++
++/* open where search file doesn't exist */
++void cabd_search_test_01() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cab = cabd->search(cabd, "!!!FILE_WHICH_DOES_NOT_EXIST");
++ TEST(cab == NULL);
++ TEST(cabd->last_error(cabd) == MSPACK_ERR_OPEN);
++
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* search file using 1-byte buffer */
++void cabd_search_test_02() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cabd->set_param(cabd, MSCABD_PARAM_SEARCHBUF, 1);
++ cab = cabd->search(cabd, "test_files/cabd/search_basic.cab");
++ cabd->set_param(cabd, MSCABD_PARAM_SEARCHBUF, 32768);
++
++ TEST(cab != NULL);
++ TEST(cab->files != NULL);
++ TEST(cab->base_offset == 6);
++ TEST(cab->files->next != NULL);
++ TEST(strcmp(cab->files->filename, "hello.c") == 0);
++ TEST(strcmp(cab->files->next->filename, "welcome.c") == 0);
++
++ TEST(cab->next != NULL);
++ TEST(cab->next->base_offset == 265);
++ TEST(cab->next->files != NULL);
++ TEST(cab->next->files->next != NULL);
++ TEST(strcmp(cab->next->files->filename, "hello.c") == 0);
++ TEST(strcmp(cab->next->files->next->filename, "welcome.c") == 0);
++
++ TEST(cab->next->next == NULL);
++
++ cabd->close(cabd, cab);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* tricky searches */
++void cabd_search_test_03() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ /* there is only ONE cab in this file. it is prepended by 4 bytes, "MSCF"
++ * (heh) and reserved fields in the real cab are filled in so the fake one
++ * looks real to the scanner but not the real reader
++ */
++ cab = cabd->search(cabd, "test_files/cabd/search_tricky1.cab");
++ TEST(cab != NULL);
++ TEST(cab->next == NULL);
++ TEST(cab->files != NULL);
++ TEST(cab->base_offset == 4);
++ TEST(cab->files->next != NULL);
++ TEST(strcmp(cab->files->filename, "hello.c") == 0);
++ TEST(strcmp(cab->files->next->filename, "welcome.c") == 0);
++
++ cabd->close(cabd, cab);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* basic parameter failures */
++void cabd_merge_test_01() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab1, *cab2;
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cab1 = cabd->open(cabd, "test_files/cabd/multi_basic_pt1.cab");
++ cab2 = cabd->open(cabd, "test_files/cabd/multi_basic_pt2.cab");
++ TEST(cab1 != NULL);
++ TEST(cab2 != NULL);
++ TEST(cabd->append(cabd, cab1, NULL) != MSPACK_ERR_OK);
++ TEST(cabd->append(cabd, NULL, cab1) != MSPACK_ERR_OK);
++ TEST(cabd->append(cabd, cab1, cab1) != MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, cab1, NULL) != MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, NULL, cab1) != MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, cab1, cab1) != MSPACK_ERR_OK);
++
++ /* merge cabs, then try merging again every other way */
++ TEST(cabd->append(cabd, cab1, cab2) == MSPACK_ERR_OK);
++ TEST(cabd->append(cabd, cab2, cab1) != MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, cab1, cab2) != MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, cab2, cab1) != MSPACK_ERR_OK);
++ TEST(cabd->append(cabd, cab1, cab2) != MSPACK_ERR_OK);
++
++ cabd->close(cabd, cab1);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++/* test merging a normal 5 part single folder cabinet set with slightly
++ * haphazard ordering. should still merge fine */
++void cabd_merge_test_02() {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab[5];
++
++ cabd = mspack_create_cab_decompressor(NULL);
++ TEST(cabd != NULL);
++
++ cab[0] = cabd->open(cabd, "test_files/cabd/multi_basic_pt1.cab");
++ cab[1] = cabd->open(cabd, "test_files/cabd/multi_basic_pt2.cab");
++ cab[2] = cabd->open(cabd, "test_files/cabd/multi_basic_pt3.cab");
++ cab[3] = cabd->open(cabd, "test_files/cabd/multi_basic_pt4.cab");
++ cab[4] = cabd->open(cabd, "test_files/cabd/multi_basic_pt5.cab");
++ TEST(cab[0] != NULL);
++ TEST(cab[1] != NULL);
++ TEST(cab[2] != NULL);
++ TEST(cab[3] != NULL);
++ TEST(cab[4] != NULL);
++ TEST(cabd->append(cabd, cab[0], cab[1]) == MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, cab[2], cab[1]) == MSPACK_ERR_OK);
++ TEST(cabd->append(cabd, cab[3], cab[4]) == MSPACK_ERR_OK);
++ TEST(cabd->prepend(cabd, cab[3], cab[2]) == MSPACK_ERR_OK);
++
++ TEST(cab[0]->files != NULL);
++ TEST(cab[0]->files->next != NULL);
++ TEST(cab[0]->files->next->next != NULL);
++ TEST(cab[0]->files->next->next->next == NULL);
++ TEST(cab[0]->files == cab[1]->files);
++ TEST(cab[1]->files == cab[2]->files);
++ TEST(cab[2]->files == cab[3]->files);
++ TEST(cab[3]->files == cab[4]->files);
++
++ TEST(cab[0]->folders != NULL);
++ TEST(cab[0]->folders->next == NULL);
++ TEST(cab[0]->folders == cab[1]->folders);
++ TEST(cab[1]->folders == cab[2]->folders);
++ TEST(cab[2]->folders == cab[3]->folders);
++ TEST(cab[3]->folders == cab[4]->folders);
++
++ cabd->close(cabd, cab[0]);
++ mspack_destroy_cab_decompressor(cabd);
++}
++
++int main() {
++ int selftest;
++
++ MSPACK_SYS_SELFTEST(selftest);
++ TEST(selftest == MSPACK_ERR_OK);
++
++ cabd_open_test_01();
++ cabd_open_test_02();
++ cabd_open_test_03();
++ cabd_open_test_04();
++ cabd_open_test_05();
++ cabd_open_test_06();
++
++ cabd_search_test_01();
++ cabd_search_test_02();
++ cabd_search_test_03();
++
++ cabd_merge_test_01();
++ cabd_merge_test_02();
++
++ /* extract() tests */
++
++ printf("ALL %d TESTS PASSED.\n", test_count);
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/cabrip.c b/libclamav/libmspack-0.4alpha/test/cabrip.c
+new file mode 100644
+index 000000000000..5df9a44b3920
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/cabrip.c
+@@ -0,0 +1,81 @@
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <sys/stat.h>
++#include <mspack.h>
++#include <system.h>
++
++#define BUF_SIZE (1024*4096)
++char buf[BUF_SIZE];
++
++void rip(char *fname, off_t offset, unsigned int length) {
++ static unsigned int counter = 1;
++ struct stat st_buf;
++ char outname[13];
++ FILE *in, *out;
++
++ do {
++ snprintf(outname, 13, "%08u.cab", counter++);
++ } while (stat(outname, &st_buf) == 0);
++
++ printf("ripping %s offset %" LD " length %u to %s\n",
++ fname, offset, length, outname);
++
++ if ((in = fopen(fname, "rb"))) {
++#ifdef HAVE_FSEEKO
++ if (!fseeko(in, offset, SEEK_SET)) {
++#else
++ if (!fseek(in, offset, SEEK_SET)) {
++#endif
++ if ((out = fopen(outname, "wb"))) {
++ while (length > 0) {
++ unsigned int run = BUF_SIZE;
++ if (run > length) run = length;
++ if (fread(&buf[0], 1, run, in) != run) {
++ perror(fname);
++ break;
++ }
++ if (fwrite(&buf[0], 1, run, out) != run) {
++ perror(outname);
++ break;
++ }
++ length -= run;
++ }
++ fclose(out);
++ }
++ else {
++ perror(outname);
++ }
++ }
++ else {
++ perror(fname);
++ }
++ fclose(in);
++ }
++ else {
++ perror(fname);
++ }
++}
++
++int main(int argc, char *argv[]) {
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab, *c;
++ int err;
++
++ MSPACK_SYS_SELFTEST(err);
++ if (err) return 0;
++
++ if ((cabd = mspack_create_cab_decompressor(NULL))) {
++ for (argv++; *argv; argv++) {
++ if ((cab = cabd->search(cabd, *argv))) {
++ for (c = cab; c; c = c->next) rip(*argv, c->base_offset, c->length);
++ cabd->close(cabd, cab);
++ }
++ }
++ mspack_destroy_cab_decompressor(cabd);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/chmd_find.c b/libclamav/libmspack-0.4alpha/test/chmd_find.c
+new file mode 100644
+index 000000000000..c30a972c57d8
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/chmd_find.c
+@@ -0,0 +1,95 @@
++/* chmd_find: tests fast-find functionality
++ */
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++
++#include <error.h>
++#include <system.h>
++
++void find(struct mschm_decompressor *chmd, struct mschmd_header *chm,
++ char *archive, char *filename, struct mschmd_file *compare)
++{
++ struct mschmd_file result;
++ if (chmd->fast_find(chmd, chm, filename, &result, sizeof(result))) {
++ fprintf(stderr, "%s: find error on \"%s\": %s\n",
++ archive, filename, ERROR(chmd));
++ }
++ else if (!result.section) {
++ if (compare) {
++ fprintf(stderr, "%s: file \"%s\" not found\n", archive, filename);
++ }
++ else {
++ printf("%s: file \"%s\" not found\n", archive, filename);
++ }
++ }
++ else {
++ printf("%s\n", filename);
++ printf(" section: %d\n", result.section->id);
++ printf(" offset: %" LD "\n", result.offset);
++ printf(" length: %" LD "\n", result.length);
++ if (compare) {
++ if (result.section->id != compare->section->id) {
++ fprintf(stderr, "%s: found file \"%s\" section is wrong "
++ "(%d vs %d)\n", archive, filename,
++ result.section->id, compare->section->id);
++ }
++
++ if (result.offset != compare->offset) {
++ fprintf(stderr, "%s: found file \"%s\" offset is wrong "
++ "(%" LD " vs %" LD ")\n", archive, filename,
++ result.offset, compare->offset);
++ }
++
++ if (result.length != compare->length) {
++ fprintf(stderr, "%s: found file \"%s\" length is wrong "
++ "(%" LD " vs %" LD ")\n", archive, filename,
++ result.length, compare->length);
++ }
++ }
++ }
++}
++
++int main(int argc, char *argv[]) {
++ struct mschm_decompressor *chmd;
++ struct mschmd_header *chm, *chm2;
++ unsigned int i;
++
++ if (argc < 2 || argc > 3) {
++ printf("Usage: %s <file.chm> [filename to find]\n", argv[0]);
++ return 1;
++ }
++
++ MSPACK_SYS_SELFTEST(i);
++ if (i) return 0;
++
++ if ((chmd = mspack_create_chm_decompressor(NULL))) {
++ if ((chm = chmd->fast_open(chmd, argv[1]))) {
++ if (argv[2]) {
++ find(chmd, chm, argv[1], argv[2], NULL);
++ }
++ else {
++ if ((chm2 = chmd->open(chmd, argv[1]))) {
++ struct mschmd_file *file;
++ for (file = chm2->files; file; file = file->next) {
++ find(chmd, chm, argv[1], file->filename, file);
++ }
++ }
++ else {
++ printf("%s: can't open -- %s\n", argv[1], ERROR(chmd));
++ }
++ }
++ chmd->close(chmd, chm);
++ }
++ else {
++ printf("%s: can't open -- %s\n", argv[1], ERROR(chmd));
++ }
++ mspack_destroy_chm_decompressor(chmd);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/chmd_md5.c b/libclamav/libmspack-0.4alpha/test/chmd_md5.c
+new file mode 100644
+index 000000000000..6187fa460914
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/chmd_md5.c
+@@ -0,0 +1,67 @@
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++
++#include <md5_fh.h>
++#include <error.h>
++
++static int sortfunc(const void *a, const void *b) {
++ off_t diff =
++ ((* ((struct mschmd_file **) a))->offset) -
++ ((* ((struct mschmd_file **) b))->offset);
++ return (diff < 0) ? -1 : ((diff > 0) ? 1 : 0);
++}
++
++int main(int argc, char *argv[]) {
++ struct mschm_decompressor *chmd;
++ struct mschmd_header *chm;
++ struct mschmd_file *file, **f;
++ unsigned int numf, i;
++ int err;
++
++ setbuf(stdout, NULL);
++ setbuf(stderr, NULL);
++
++ MSPACK_SYS_SELFTEST(err);
++ if (err) return 0;
++
++ if ((chmd = mspack_create_chm_decompressor(&read_files_write_md5))) {
++ for (argv++; *argv; argv++) {
++ printf("*** %s\n", *argv);
++ if ((chm = chmd->open(chmd, *argv))) {
++
++ /* extract in order of the offset into content section - faster */
++ for (numf=0, file=chm->files; file; file = file->next) numf++;
++ if ((f = (struct mschmd_file **) calloc(numf, sizeof(struct mschmd_file *)))) {
++ for (i=0, file=chm->files; file; file = file->next) f[i++] = file;
++ qsort(f, numf, sizeof(struct mschmd_file *), &sortfunc);
++ for (i = 0; i < numf; i++) {
++ if (chmd->extract(chmd, f[i], NULL)) {
++ fprintf(stderr, "%s: extract error on \"%s\": %s\n",
++ *argv, f[i]->filename, ERROR(chmd));
++ }
++ else {
++ printf("%s %s\n", md5_string, f[i]->filename);
++ }
++ }
++ free(f);
++ }
++
++ chmd->close(chmd, chm);
++ }
++ else {
++ fprintf(stderr, "%s: can't open -- %s\n", *argv, ERROR(chmd));
++ }
++ }
++ mspack_destroy_chm_decompressor(chmd);
++ }
++ else {
++ fprintf(stderr, "%s: can't make CHM decompressor\n", *argv);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/chmd_order.c b/libclamav/libmspack-0.4alpha/test/chmd_order.c
+new file mode 100644
+index 000000000000..cb7f47d0e99f
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/chmd_order.c
+@@ -0,0 +1,144 @@
++/* chmd_order: test that extracting a CHM file in different ways works
++ * and all give the same results:
++ * - extracting files in the order they're listed (generally alphabetical)
++ * - extracting files ordered by their content section offset
++ * - extracting files using fast_find() to find them
++ * - extracting files from two chms at the same time with one decompressor
++ */
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++
++#include <md5_fh.h>
++#include <error.h>
++
++struct my_file {
++ struct mschmd_file *file;
++ struct mschmd_file result;
++ char ordered[32], sorted[32], fast_find[32], mixed[32];
++};
++
++static int sortfunc(const void *a, const void *b) {
++ off_t diff =
++ ((struct my_file *) a)->file->offset -
++ ((struct my_file *) b)->file->offset;
++ return (diff < 0) ? -1 : ((diff > 0) ? 1 : 0);
++}
++
++int main(int argc, char *argv[]) {
++ struct mschm_decompressor *chmd;
++ struct mschmd_header *chm, *chm2;
++ struct mschmd_file *file;
++ struct my_file *f;
++ unsigned int N, i;
++
++ MSPACK_SYS_SELFTEST(i);
++ if (i) return 0;
++
++ if ((chmd = mspack_create_chm_decompressor(&read_files_write_md5))) {
++ for (argv++; *argv; argv++) {
++ printf("%s\n", *argv);
++
++ if ((chm = chmd->open(chmd, *argv))) {
++ if ((chm2 = chmd->fast_open(chmd, *argv))) {
++
++ /* count the number of files, allocate a results structure */
++ for (N=0, file = chm->files; file; file = file->next) N++;
++ if ((f = (struct my_file *) calloc(N, sizeof(struct my_file)))) {
++
++ /* fill out results structure while doing ordered extraction */
++ for (i = 0, file = chm->files; file; file = file->next, i++) {
++ printf("OX %s\n", file->filename);
++ f[i].file = file;
++ if (chmd->extract(chmd, file, NULL)) {
++ fprintf(stderr, "%s: O extract error on \"%s\": %s\n",
++ *argv, file->filename, ERROR(chmd));
++ continue;
++ }
++ memcpy(&f[i].ordered[0], md5_string, 32);
++ }
++
++ /* sort the list into offset order */
++ qsort(f, N, sizeof(struct my_file), &sortfunc);
++
++ /* extract in offset order */
++ for (i = 0; i < N; i++) {
++ printf("SX %s\n", f[i].file->filename);
++ if (chmd->extract(chmd, f[i].file, NULL)) {
++ fprintf(stderr, "%s: S extract error on \"%s\": %s\n",
++ *argv, f[i].file->filename, ERROR(chmd));
++ continue;
++ }
++ memcpy(&f[i].sorted[0], md5_string, 32);
++ }
++
++ /* extract using fast_find */
++ for (i = 0; i < N; i++) {
++ printf("FX %s\n", f[i].file->filename);
++
++ if (chmd->fast_find(chmd, chm2,
++ f[i].file->filename,
++ &f[i].result, sizeof(struct mschmd_file)))
++ {
++ fprintf(stderr, "%s: find error on \"%s\": %s\n",
++ *argv, f[i].file->filename, ERROR(chmd));
++ continue;
++ }
++ if (!f[i].result.section) {
++ fprintf(stderr, "%s: can't find file \"%s\"\n",
++ *argv, f[i].file->filename);
++ continue;
++ }
++ if (chmd->extract(chmd, &f[i].result, NULL)) {
++ fprintf(stderr, "%s: F extract error on \"%s\": %s\n",
++ *argv, f[i].file->filename, ERROR(chmd));
++ continue;
++ }
++ memcpy(&f[i].fast_find[0], md5_string, 32);
++ }
++
++ /* extract two chms at once */
++ for (i = 0; i < N; i++) {
++ printf("MX %s\n", f[i].file->filename);
++ chmd->extract(chmd, f[i].file, NULL);
++ if (chmd->extract(chmd, &f[i].result, NULL)) {
++ fprintf(stderr, "%s: M extract error on \"%s\": %s\n",
++ *argv, f[i].file->filename, ERROR(chmd));
++ continue;
++ }
++ memcpy(&f[i].mixed[0], md5_string, 32);
++ }
++
++ /* check all the MD5 sums match */
++ for (i = 0; i < N; i++) {
++ if (memcmp(&f[i].ordered, &f[i].sorted, 32) ||
++ memcmp(&f[i].ordered, &f[i].fast_find, 32) ||
++ memcmp(&f[i].ordered, &f[i].mixed, 32))
++ {
++ fprintf(stderr, "%s: sums mismatch on %s "
++ "(O=%32.32s,S=%32.32s,F=%32.32s,M=%32.32s)\n",
++ *argv, f[i].file->filename,
++ &f[i].ordered[0], &f[i].sorted[0],
++ &f[i].fast_find[0], &f[i].mixed[0]);
++ }
++ }
++
++ free(f);
++ }
++ chmd->close(chmd, chm2);
++ }
++ chmd->close(chmd, chm);
++ }
++ else {
++ printf("%s: can't open -- %s\n", *argv, ERROR(chmd));
++ }
++ }
++ mspack_destroy_chm_decompressor(chmd);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/chminfo.c b/libclamav/libmspack-0.4alpha/test/chminfo.c
+new file mode 100644
+index 000000000000..b21ec6427b42
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/chminfo.c
+@@ -0,0 +1,284 @@
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <string.h>
++#include <mspack.h>
++#include <system.h>
++
++#define FILENAME ".chminfo-temp"
++
++unsigned char *load_sys_data(struct mschm_decompressor *chmd,
++ struct mschmd_header *chm,
++ const char *filename,
++ off_t *length_ptr)
++{
++ struct mschmd_file *file;
++ unsigned char *data;
++ FILE *fh;
++
++ for (file = chm->sysfiles; file; file = file->next) {
++ if (strcmp(file->filename, filename) == 0) break;
++ }
++ if (!file || file->section->id != 0) return NULL;
++ if (chmd->extract(chmd, file, FILENAME)) return NULL;
++ if (length_ptr) *length_ptr = file->length;
++ if (!(data = (unsigned char *) malloc((size_t) file->length))) return NULL;
++ if ((fh = fopen(FILENAME, "rb"))) {
++ fread(data, (size_t) file->length, 1, fh);
++ fclose(fh);
++ }
++ else {
++ free(data);
++ data = NULL;
++ }
++ unlink(FILENAME);
++ return data;
++}
++
++char *guid(unsigned char *data) {
++ static char result[43];
++ snprintf(result, sizeof(result),
++ "{%08X-%04X-%04X-%04X-%02X%02X%02X%02X%02X%02X%02X%02X}",
++ EndGetI32(&data[0]),
++ data[4] | (data[5] << 8),
++ data[6] | (data[7] << 8),
++ data[8] | (data[9] << 8),
++ data[10], data[11], data[12], data[13],
++ data[14], data[15], data[16], data[17]);
++ return result;
++}
++
++#define READ_ENCINT(var, label) do { \
++ (var) = 0; \
++ do { \
++ if (p > &chunk[chm->chunk_size-2]) goto label; \
++ (var) = ((var) << 7) | (*p & 0x7F); \
++ } while (*p++ & 0x80); \
++} while (0)
++
++void print_dir(struct mschmd_header *chm, char *filename) {
++ unsigned char dir[0x54], *chunk;
++ unsigned int i;
++ FILE *fh;
++
++ if (!(chunk = (unsigned char *) malloc(chm->chunk_size))) return;
++
++ if ((fh = fopen(filename, "rb"))) {
++#ifdef HAVE_FSEEKO
++ fseeko(fh, chm->dir_offset - 84, SEEK_SET);
++#else
++ fseek(fh, chm->dir_offset - 84, SEEK_SET);
++#endif
++ fread(&dir[0], 84, 1, fh);
++ printf(" chmhs1_Signature = %4.4s\n", &dir[0]);
++ printf(" chmhs1_Version = %d\n", EndGetI32(&dir[4]));
++ printf(" chmhs1_HeaderLen = %d\n", EndGetI32(&dir[8]));
++ printf(" chmhs1_Unknown1 = %d\n", EndGetI32(&dir[12]));
++ printf(" chmhs1_ChunkSize = %d\n", EndGetI32(&dir[16]));
++ printf(" chmhs1_Density = %d\n", EndGetI32(&dir[20]));
++ printf(" chmhs1_Depth = %d\n", EndGetI32(&dir[24]));
++ printf(" chmhs1_IndexRoot = %d\n", EndGetI32(&dir[28]));
++ printf(" chmhs1_FirstPMGL = %d\n", EndGetI32(&dir[32]));
++ printf(" chmhs1_LastPMGL = %d\n", EndGetI32(&dir[36]));
++ printf(" chmhs1_Unknown2 = %d\n", EndGetI32(&dir[40]));
++ printf(" chmhs1_NumChunks = %d\n", EndGetI32(&dir[44]));
++ printf(" chmhs1_LanguageID = %d\n", EndGetI32(&dir[48]));
++ printf(" chmhs1_GUID = %s\n", guid(&dir[52]));
++ printf(" chmhs1_Unknown3 = %d\n", EndGetI32(&dir[68]));
++ printf(" chmhs1_Unknown4 = %d\n", EndGetI32(&dir[72]));
++ printf(" chmhs1_Unknown5 = %d\n", EndGetI32(&dir[76]));
++ printf(" chmhs1_Unknown6 = %d\n", EndGetI32(&dir[80]));
++
++ for (i = 0; i < chm->num_chunks; i++) {
++ unsigned int num_entries, quickref_size, j, k;
++ unsigned char *p, *name;
++ printf(" CHUNK %u:\n", i);
++ fread(chunk, chm->chunk_size, 1, fh);
++
++ if ((chunk[0] == 'P') && (chunk[1] == 'M') &&
++ (chunk[2] == 'G') && (chunk[3] == 'L'))
++ {
++ k = chm->chunk_size - 2;
++ num_entries = chunk[k] | (chunk[k+1] << 8);
++ quickref_size = EndGetI32(&chunk[4]);
++ if (quickref_size > (chm->chunk_size - 20)) {
++ printf(" QR size of %d too large (max is %d)\n",
++ quickref_size, chm->chunk_size - 20);
++ quickref_size = chm->chunk_size - 20;
++ }
++ printf(" PMGL entries=%u qrsize=%u zero=%u prev=%d next=%d\n",
++ num_entries, quickref_size, EndGetI32(&chunk[8]),
++ EndGetI32(&chunk[12]), EndGetI32(&chunk[16]));
++
++ printf(" QR: entry %4u = offset %u\n", 0, 20);
++ j = (1 << chm->density) + 1;
++ while (j < num_entries) {
++ k -= 2;
++ if (k < (chm->chunk_size - quickref_size)) break;
++ printf(" QR: entry %4u = offset %u\n",
++ j, (chunk[k] | (chunk[k+1] << 8)) + 20);
++ j += (1 << chm->density) + 1;
++ }
++
++ p = &chunk[20];
++ for (j = 0; j < num_entries; j++) {
++ unsigned int name_len = 0, section = 0, offset = 0, length = 0;
++ printf(" %4d: ", (int) (p - &chunk[0]));
++ READ_ENCINT(name_len, PMGL_end); name = p; p += name_len;
++ READ_ENCINT(section, PMGL_end);
++ READ_ENCINT(offset, PMGL_end);
++ READ_ENCINT(length, PMGL_end);
++ printf("sec=%u off=%-10u len=%-10u name=\"",section,offset,length);
++ if (name_len) fwrite(name, 1, name_len, stdout);
++ printf("\"\n");
++ }
++ PMGL_end:
++ if (j != num_entries) printf("premature end of chunk\n");
++
++ }
++ else if ((chunk[0] == 'P') && (chunk[1] == 'M') &&
++ (chunk[2] == 'G') && (chunk[3] == 'I'))
++ {
++ k = chm->chunk_size - 2;
++ num_entries = chunk[k] | (chunk[k+1] << 8);
++ quickref_size = EndGetI32(&chunk[4]);
++ printf(" PMGI entries=%u free=%u\n", num_entries, quickref_size);
++
++ printf(" QR: entry %4u = offset %u\n", 0, 8);
++ j = (1 << chm->density) + 1;
++ while (j < num_entries) {
++ k -= 2;
++ printf(" QR: entry %4u = offset %u\n",
++ j, (chunk[k] | (chunk[k+1] << 8)) + 8);
++ j += (1 << chm->density) + 1;
++ }
++
++ p = &chunk[8];
++ for (j = 0; j < num_entries; j++) {
++ unsigned int name_len, section;
++ printf(" %4d: ", (int) (p - &chunk[0]));
++ READ_ENCINT(name_len, PMGI_end); name = p; p += name_len;
++ READ_ENCINT(section, PMGI_end);
++ printf("chunk=%-4u name=\"",section);
++ if (name_len) fwrite(name, 1, name_len, stdout);
++ printf("\"\n");
++ }
++ PMGI_end:
++ if (j != num_entries) printf("premature end of chunk\n");
++ }
++ else {
++ printf(" unknown format\n");
++ }
++ }
++
++ fclose(fh);
++ }
++}
++
++
++int main(int argc, char *argv[]) {
++ struct mschm_decompressor *chmd;
++ struct mschmd_header *chm;
++ struct mschmd_file *file;
++ unsigned int numf, i;
++ unsigned char *data;
++ off_t pos, len;
++
++ setbuf(stdout, NULL);
++ setbuf(stderr, NULL);
++
++ MSPACK_SYS_SELFTEST(i);
++ if (i) return 0;
++
++ if ((chmd = mspack_create_chm_decompressor(NULL))) {
++ for (argv++; *argv; argv++) {
++ printf("%s\n", *argv);
++ if ((chm = chmd->open(chmd, *argv))) {
++ printf(" chmhead_Version %u\n", chm->version);
++ printf(" chmhead_Timestamp %u\n", chm->timestamp);
++ printf(" chmhead_LanguageID %u\n", chm->language);
++ printf(" chmhs0_FileLen %" LD "\n", chm->length);
++ printf(" chmhst_OffsetHS1 %" LD "\n", chm->dir_offset);
++ printf(" chmhst3_OffsetCS0 %" LD "\n", chm->sec0.offset);
++
++ print_dir(chm, *argv);
++
++ if ((data = load_sys_data(chmd, chm,
++ "::DataSpace/Storage/MSCompressed/ControlData", &len)))
++ {
++ printf(" lzxcd_Length %u\n", EndGetI32(&data[0]));
++ printf(" lzxcd_Signature %4.4s\n", &data[4]);
++ printf(" lzxcd_Version %u\n", EndGetI32(&data[8]));
++ printf(" lzxcd_ResetInterval %u\n", EndGetI32(&data[12]));
++ printf(" lzxcd_WindowSize %u\n", EndGetI32(&data[16]));
++ printf(" lzxcd_CacheSize %u\n", EndGetI32(&data[20]));
++ printf(" lzxcd_Unknown1 %u\n", EndGetI32(&data[24]));
++ free(data);
++ }
++
++ if ((data = load_sys_data(chmd, chm,
++ "::DataSpace/Storage/MSCompressed/Transform/{7FC28940-"
++ "9D31-11D0-9B27-00A0C91E9C7C}/InstanceData/ResetTable", &len)))
++ {
++ off_t contents = chm->sec0.offset;
++ printf(" lzxrt_Unknown1 %u\n", EndGetI32(&data[0]));
++ printf(" lzxrt_NumEntries %u\n", EndGetI32(&data[4]));
++ printf(" lzxrt_EntrySize %u\n", EndGetI32(&data[8]));
++ printf(" lzxrt_TableOffset %u\n", EndGetI32(&data[12]));
++ printf(" lzxrt_UncompLen %" LU "\n", EndGetI64(&data[16]));
++ printf(" lzxrt_CompLen %" LU "\n", EndGetI64(&data[24]));
++ printf(" lzxrt_FrameLen %u\n", EndGetI32(&data[32]));
++
++ for (file = chm->sysfiles; file; file = file->next) {
++ if (strcmp(file->filename,
++ "::DataSpace/Storage/MSCompressed/Content") == 0)
++ {
++ contents += file->offset;
++ break;
++ }
++ }
++
++ printf(" - reset table (uncomp offset -> stream offset "
++ "[real offset, length in file]\n");
++
++ numf = EndGetI32(&data[4]);
++ pos = ((unsigned int) EndGetI32(&data[12]));
++ switch (EndGetI32(&data[8])) {
++ case 4:
++ for (i = 0; i < numf && pos < len; i++, pos += 4) {
++ unsigned int rtdata = EndGetI32(&data[pos]);
++ printf(" %-10u -> %-10u [ %" LU " %u ]\n",
++ i * EndGetI32(&data[32]),
++ rtdata,
++ contents + rtdata,
++ (i == (numf-1))
++ ? (EndGetI32(&data[24]) - rtdata)
++ : (EndGetI32(&data[pos + 4]) - rtdata)
++ );
++ }
++ break;
++ case 8:
++ for (i = 0; i < numf && pos < len; i++, pos += 8) {
++ unsigned long long int rtdata = EndGetI64(&data[pos]);
++ printf(" %-10" LU " -> %-10" LU " [ %" LU " %" LU " ]\n",
++ i * EndGetI64(&data[32]), rtdata, contents + rtdata,
++ (i == (numf-1))
++ ? (EndGetI64(&data[24]) - rtdata)
++ : (EndGetI64(&data[pos + 8]) - rtdata)
++ );
++ }
++ break;
++ }
++ free(data);
++ }
++ chmd->close(chmd, chm);
++ }
++ }
++ mspack_destroy_chm_decompressor(chmd);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/chmx.c b/libclamav/libmspack-0.4alpha/test/chmx.c
+new file mode 100644
+index 000000000000..0d0b3c2221ef
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/chmx.c
+@@ -0,0 +1,216 @@
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++#include <ctype.h>
++#include <sys/stat.h>
++
++#include <error.h>
++
++mode_t user_umask;
++
++#define FILENAME ".test.chmx"
++
++/**
++ * Ensures that all directory components in a filepath exist. New directory
++ * components are created, if necessary.
++ *
++ * @param path the filepath to check
++ * @return non-zero if all directory components in a filepath exist, zero
++ * if components do not exist and cannot be created
++ */
++static int ensure_filepath(char *path) {
++ struct stat st_buf;
++ char *p;
++ int ok;
++
++ for (p = &path[1]; *p; p++) {
++ if (*p != '/') continue;
++ *p = '\0';
++ ok = (stat(path, &st_buf) == 0) && S_ISDIR(st_buf.st_mode);
++ if (!ok) ok = (mkdir(path, 0777 & ~user_umask) == 0);
++ *p = '/';
++ if (!ok) return 0;
++ }
++ return 1;
++}
++
++/**
++ * Creates a UNIX filename from the internal CAB filename and the given
++ * parameters.
++ *
++ * @param fname the internal CAB filename.
++ * @param dir a directory path to prepend to the output filename.
++ * @param lower if non-zero, filename should be made lower-case.
++ * @param isunix if zero, MS-DOS path seperators are used in the internal
++ * CAB filename. If non-zero, UNIX path seperators are used.
++ * @param utf8 if non-zero, the internal CAB filename is encoded in UTF8.
++ * @return a freshly allocated and created filename, or NULL if there was
++ * not enough memory.
++ * @see unix_path_seperators()
++ */
++static char *create_output_name(unsigned char *fname, unsigned char *dir,
++ int lower, int isunix, int utf8)
++{
++ unsigned char *p, *name, c, *fe, sep, slash;
++ unsigned int x;
++
++ sep = (isunix) ? '/' : '\\'; /* the path-seperator */
++ slash = (isunix) ? '\\' : '/'; /* the other slash */
++
++ /* length of filename */
++ x = strlen((char *) fname);
++ /* UTF8 worst case scenario: tolower() expands all chars from 1 to 3 bytes */
++ if (utf8) x *= 3;
++ /* length of output directory */
++ if (dir) x += strlen((char *) dir);
++
++ if (!(name = (unsigned char *) malloc(x + 2))) {
++ fprintf(stderr, "out of memory!\n");
++ return NULL;
++ }
++
++ /* start with blank name */
++ *name = '\0';
++
++ /* add output directory if needed */
++ if (dir) {
++ strcpy((char *) name, (char *) dir);
++ strcat((char *) name, "/");
++ }
++
++ /* remove leading slashes */
++ while (*fname == sep) fname++;
++
++ /* copy from fi->filename to new name, converting MS-DOS slashes to UNIX
++ * slashes as we go. Also lowercases characters if needed.
++ */
++ p = &name[strlen((char *)name)];
++ fe = &fname[strlen((char *)fname)];
++
++ if (utf8) {
++ /* UTF8 translates two-byte unicode characters into 1, 2 or 3 bytes.
++ * %000000000xxxxxxx -> %0xxxxxxx
++ * %00000xxxxxyyyyyy -> %110xxxxx %10yyyyyy
++ * %xxxxyyyyyyzzzzzz -> %1110xxxx %10yyyyyy %10zzzzzz
++ *
++ * Therefore, the inverse is as follows:
++ * First char:
++ * 0x00 - 0x7F = one byte char
++ * 0x80 - 0xBF = invalid
++ * 0xC0 - 0xDF = 2 byte char (next char only 0x80-0xBF is valid)
++ * 0xE0 - 0xEF = 3 byte char (next 2 chars only 0x80-0xBF is valid)
++ * 0xF0 - 0xFF = invalid
++ */
++ do {
++ if (fname >= fe) {
++ free(name);
++ return NULL;
++ }
++
++ /* get next UTF8 char */
++ if ((c = *fname++) < 0x80) x = c;
++ else {
++ if ((c >= 0xC0) && (c < 0xE0)) {
++ x = (c & 0x1F) << 6;
++ x |= *fname++ & 0x3F;
++ }
++ else if ((c >= 0xE0) && (c < 0xF0)) {
++ x = (c & 0xF) << 12;
++ x |= (*fname++ & 0x3F) << 6;
++ x |= *fname++ & 0x3F;
++ }
++ else x = '?';
++ }
++
++ /* whatever is the path seperator -> '/'
++ * whatever is the other slash -> '\\'
++ * otherwise, if lower is set, the lowercase version */
++ if (x == sep) x = '/';
++ else if (x == slash) x = '\\';
++ else if (lower) x = (unsigned int) tolower((int) x);
++
++ /* integer back to UTF8 */
++ if (x < 0x80) {
++ *p++ = (unsigned char) x;
++ }
++ else if (x < 0x800) {
++ *p++ = 0xC0 | (x >> 6);
++ *p++ = 0x80 | (x & 0x3F);
++ }
++ else {
++ *p++ = 0xE0 | (x >> 12);
++ *p++ = 0x80 | ((x >> 6) & 0x3F);
++ *p++ = 0x80 | (x & 0x3F);
++ }
++ } while (x);
++ }
++ else {
++ /* regular non-utf8 version */
++ do {
++ c = *fname++;
++ if (c == sep) c = '/';
++ else if (c == slash) c = '\\';
++ else if (lower) c = (unsigned char) tolower((int) c);
++ } while ((*p++ = c));
++ }
++ return (char *) name;
++}
++
++static int sortfunc(const void *a, const void *b) {
++ off_t diff =
++ ((* ((struct mschmd_file **) a))->offset) -
++ ((* ((struct mschmd_file **) b))->offset);
++ return (diff < 0) ? -1 : ((diff > 0) ? 1 : 0);
++}
++
++int main(int argc, char *argv[]) {
++ struct mschm_decompressor *chmd;
++ struct mschmd_header *chm;
++ struct mschmd_file *file, **f;
++ unsigned int numf, i;
++
++ setbuf(stdout, NULL);
++ setbuf(stderr, NULL);
++ user_umask = umask(0); umask(user_umask);
++
++ MSPACK_SYS_SELFTEST(i);
++ if (i) return 0;
++
++ if ((chmd = mspack_create_chm_decompressor(NULL))) {
++ for (argv++; *argv; argv++) {
++ printf("%s\n", *argv);
++ if ((chm = chmd->open(chmd, *argv))) {
++
++ /* build an ordered list of files for maximum extraction speed */
++ for (numf=0, file=chm->files; file; file = file->next) numf++;
++ if ((f = (struct mschmd_file **) calloc(numf, sizeof(struct mschmd_file *)))) {
++ for (i=0, file=chm->files; file; file = file->next) f[i++] = file;
++ qsort(f, numf, sizeof(struct mschmd_file *), &sortfunc);
++
++ for (i = 0; i < numf; i++) {
++ char *outname = create_output_name((unsigned char *)f[i]->filename,NULL,0,1,0);
++ printf("Extracting %s\n", outname);
++ ensure_filepath(outname);
++ if (chmd->extract(chmd, f[i], outname)) {
++ printf("%s: extract error on \"%s\": %s\n",
++ *argv, f[i]->filename, ERROR(chmd));
++ }
++ free(outname);
++ }
++ free(f);
++ }
++ chmd->close(chmd, chm);
++ }
++ else {
++ printf("%s: can't open -- %s\n", *argv, ERROR(chmd));
++ }
++ }
++ mspack_destroy_chm_decompressor(chmd);
++ }
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/error.h b/libclamav/libmspack-0.4alpha/test/error.h
+new file mode 100644
+index 000000000000..b1d627b27c09
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/error.h
+@@ -0,0 +1,22 @@
++#define ERROR(base) error_msg(base->last_error(base))
++
++const char *error_msg(int error) {
++ static char buf[32];
++ switch (error) {
++ case MSPACK_ERR_OK: return "no error";
++ case MSPACK_ERR_ARGS: return "bad arguments to library function";
++ case MSPACK_ERR_OPEN: return "error opening file";
++ case MSPACK_ERR_READ: return "read error";
++ case MSPACK_ERR_WRITE: return "write error";
++ case MSPACK_ERR_SEEK: return "seek error";
++ case MSPACK_ERR_NOMEMORY: return "out of memory";
++ case MSPACK_ERR_SIGNATURE: return "bad signature";
++ case MSPACK_ERR_DATAFORMAT: return "error in data format";
++ case MSPACK_ERR_CHECKSUM: return "checksum error";
++ case MSPACK_ERR_CRUNCH: return "compression error";
++ case MSPACK_ERR_DECRUNCH: return "decompression error";
++ }
++
++ snprintf(buf, sizeof(buf), "unknown error %d", error);
++ return buf;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/expand.c b/libclamav/libmspack-0.4alpha/test/expand.c
+new file mode 100644
+index 000000000000..215ef7ba17d5
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/expand.c
+@@ -0,0 +1,79 @@
++/* acts like Microsoft's EXPAND.EXE */
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++
++#include <mspack.h>
++#include <error.h>
++
++int main(int argc, char *argv[]) {
++ struct msszdd_decompressor *szddd;
++ struct mskwaj_decompressor *kwajd;
++ struct msszddd_header *szdd;
++ struct mskwajd_header *kwaj;
++ int err;
++
++ if (argc != 3) {
++ fprintf(stderr, "Usage: %s <input file> <output file>\n", argv[0]);
++ return 1;
++ }
++
++ /* if self-test reveals an error */
++ MSPACK_SYS_SELFTEST(err);
++ if (err) return 1;
++
++ szddd = mspack_create_szdd_decompressor(NULL);
++ kwajd = mspack_create_kwaj_decompressor(NULL);
++
++ if (!szddd || !kwajd) {
++ fprintf(stderr, "can't make either SZDD or KWAJ decompressor\n");
++ mspack_destroy_szdd_decompressor(szddd);
++ mspack_destroy_kwaj_decompressor(kwajd);
++ return 1;
++ }
++
++ /* open then extract; try SZDD */
++ if ((szdd = szddd->open(szddd, argv[1]))) {
++ if (szddd->extract(szddd, szdd, argv[2]) != MSPACK_ERR_OK) {
++ fprintf(stderr, "%s: SZDD extract error: %s\n", argv[2], ERROR(szddd));
++ }
++ szddd->close(szddd, szdd);
++ }
++ else {
++ if (szddd->last_error(szddd) == MSPACK_ERR_SIGNATURE) {
++ /* try KWAJ */
++ if ((kwaj = kwajd->open(kwajd, argv[1]))) {
++ if (kwajd->extract(kwajd, kwaj, argv[2]) != MSPACK_ERR_OK) {
++ fprintf(stderr, "%s: KWAJ extract error: %s\n", argv[2], ERROR(kwajd));
++ }
++ kwajd->close(kwajd, kwaj);
++ }
++ else {
++ fprintf(stderr, "%s: KWAJ open error: %s\n", argv[1], ERROR(kwajd));
++ }
++ }
++ else {
++ fprintf(stderr, "%s: SZDD open error: %s\n", argv[1], ERROR(szddd));
++ }
++ }
++
++ /* decompress in a single step; try KWAJ */
++ if (kwajd->decompress(kwajd, argv[1], argv[2]) != MSPACK_ERR_OK) {
++ if (kwajd->last_error(kwajd) == MSPACK_ERR_SIGNATURE) {
++ if (szddd->decompress(szddd, argv[1], argv[2]) != MSPACK_ERR_OK) {
++ fprintf(stderr, "%s -> %s: SZDD decompress error: %s\n", argv[1], argv[2], ERROR(szddd));
++ }
++ }
++ else {
++ fprintf(stderr, "%s -> %s: KWAJ decompress error: %s\n", argv[1], argv[2], ERROR(kwajd));
++ }
++ }
++
++ mspack_destroy_szdd_decompressor(szddd);
++ mspack_destroy_kwaj_decompressor(kwajd);
++ return 0;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/md5.c b/libclamav/libmspack-0.4alpha/test/md5.c
+new file mode 100644
+index 000000000000..208740689392
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/md5.c
+@@ -0,0 +1,457 @@
++/* md5.c - Functions to compute MD5 message digest of files or memory blocks
++ according to the definition of MD5 in RFC 1321 from April 1992.
++ Copyright (C) 1995, 1996, 2001, 2003 Free Software Foundation, Inc.
++ NOTE: The canonical source of this file is maintained with the GNU C
++ Library. Bugs can be reported to bug-glibc at prep.ai.mit.edu.
++
++ This program is free software; you can redistribute it and/or modify it
++ under the terms of the GNU General Public License as published by the
++ Free Software Foundation; either version 2, or (at your option) any
++ later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software Foundation,
++ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
++
++/* Written by Ulrich Drepper <drepper at gnu.ai.mit.edu>, 1995. */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include <sys/types.h>
++
++#if STDC_HEADERS || defined _LIBC
++# include <stdlib.h>
++# include <string.h>
++#else
++# ifndef HAVE_MEMCPY
++# define memcpy(d, s, n) bcopy ((s), (d), (n))
++# endif
++#endif
++
++#include <md5.h>
++
++#ifdef _LIBC
++# include <endian.h>
++# if __BYTE_ORDER == __BIG_ENDIAN
++# define WORDS_BIGENDIAN 1
++# endif
++/* We need to keep the namespace clean so define the MD5 function
++ protected using leading __ . */
++# define md5_init_ctx __md5_init_ctx
++# define md5_process_block __md5_process_block
++# define md5_process_bytes __md5_process_bytes
++# define md5_finish_ctx __md5_finish_ctx
++# define md5_read_ctx __md5_read_ctx
++# define md5_stream __md5_stream
++# define md5_buffer __md5_buffer
++#endif
++
++#ifdef WORDS_BIGENDIAN
++# define SWAP(n) \
++ (((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
++#else
++# define SWAP(n) (n)
++#endif
++
++#define BLOCKSIZE 4096
++/* Ensure that BLOCKSIZE is a multiple of 64. */
++#if BLOCKSIZE % 64 != 0
++/* FIXME-someday (soon?): use #error instead of this kludge. */
++"invalid BLOCKSIZE"
++#endif
++
++/* This array contains the bytes used to pad the buffer to the next
++ 64-byte boundary. (RFC 1321, 3.1: Step 1) */
++static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ };
++
++
++/* Initialize structure containing state of computation.
++ (RFC 1321, 3.3: Step 3) */
++void
++md5_init_ctx (struct md5_ctx *ctx)
++{
++ ctx->A = 0x67452301;
++ ctx->B = 0xefcdab89;
++ ctx->C = 0x98badcfe;
++ ctx->D = 0x10325476;
++
++ ctx->total[0] = ctx->total[1] = 0;
++ ctx->buflen = 0;
++}
++
++/* Put result from CTX in first 16 bytes following RESBUF. The result
++ must be in little endian byte order.
++
++ IMPORTANT: On some systems it is required that RESBUF is correctly
++ aligned for a 32 bits value. */
++void *
++md5_read_ctx (const struct md5_ctx *ctx, void *resbuf)
++{
++ ((md5_uint32 *) resbuf)[0] = SWAP (ctx->A);
++ ((md5_uint32 *) resbuf)[1] = SWAP (ctx->B);
++ ((md5_uint32 *) resbuf)[2] = SWAP (ctx->C);
++ ((md5_uint32 *) resbuf)[3] = SWAP (ctx->D);
++
++ return resbuf;
++}
++
++/* Process the remaining bytes in the internal buffer and the usual
++ prolog according to the standard and write the result to RESBUF.
++
++ IMPORTANT: On some systems it is required that RESBUF is correctly
++ aligned for a 32 bits value. */
++void *
++md5_finish_ctx (struct md5_ctx *ctx, void *resbuf)
++{
++ /* Take yet unprocessed bytes into account. */
++ md5_uint32 bytes = ctx->buflen;
++ size_t pad;
++
++ /* Now count remaining bytes. */
++ ctx->total[0] += bytes;
++ if (ctx->total[0] < bytes)
++ ++ctx->total[1];
++
++ pad = bytes >= 56 ? 64 + 56 - bytes : 56 - bytes;
++ memcpy (&ctx->buffer[bytes], fillbuf, pad);
++
++ /* Put the 64-bit file length in *bits* at the end of the buffer. */
++ *(md5_uint32 *) &ctx->buffer[bytes + pad] = SWAP (ctx->total[0] << 3);
++ *(md5_uint32 *) &ctx->buffer[bytes + pad + 4] = SWAP ((ctx->total[1] << 3) |
++ (ctx->total[0] >> 29));
++
++ /* Process last bytes. */
++ md5_process_block (ctx->buffer, bytes + pad + 8, ctx);
++
++ return md5_read_ctx (ctx, resbuf);
++}
++
++/* Compute MD5 message digest for bytes read from STREAM. The
++ resulting message digest number will be written into the 16 bytes
++ beginning at RESBLOCK. */
++int
++md5_stream (FILE *stream, void *resblock)
++{
++ struct md5_ctx ctx;
++ char buffer[BLOCKSIZE + 72];
++ size_t sum;
++
++ /* Initialize the computation context. */
++ md5_init_ctx (&ctx);
++
++ /* Iterate over full file contents. */
++ while (1)
++ {
++ /* We read the file in blocks of BLOCKSIZE bytes. One call of the
++ computation function processes the whole buffer so that with the
++ next round of the loop another block can be read. */
++ size_t n;
++ sum = 0;
++
++ /* Read block. Take care for partial reads. */
++ while (1)
++ {
++ n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
++
++ sum += n;
++
++ if (sum == BLOCKSIZE)
++ break;
++
++ if (n == 0)
++ {
++ /* Check for the error flag IFF N == 0, so that we don't
++ exit the loop after a partial read due to e.g., EAGAIN
++ or EWOULDBLOCK. */
++ if (ferror (stream))
++ return 1;
++ goto process_partial_block;
++ }
++
++ /* We've read at least one byte, so ignore errors. But always
++ check for EOF, since feof may be true even though N > 0.
++ Otherwise, we could end up calling fread after EOF. */
++ if (feof (stream))
++ goto process_partial_block;
++ }
++
++ /* Process buffer with BLOCKSIZE bytes. Note that
++ BLOCKSIZE % 64 == 0
++ */
++ md5_process_block (buffer, BLOCKSIZE, &ctx);
++ }
++
++ process_partial_block:;
++
++ /* Process any remaining bytes. */
++ if (sum > 0)
++ md5_process_bytes (buffer, sum, &ctx);
++
++ /* Construct result in desired memory. */
++ md5_finish_ctx (&ctx, resblock);
++ return 0;
++}
++
++/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The
++ result is always in little endian byte order, so that a byte-wise
++ output yields to the wanted ASCII representation of the message
++ digest. */
++void *
++md5_buffer (const char *buffer, size_t len, void *resblock)
++{
++ struct md5_ctx ctx;
++
++ /* Initialize the computation context. */
++ md5_init_ctx (&ctx);
++
++ /* Process whole buffer but last len % 64 bytes. */
++ md5_process_bytes (buffer, len, &ctx);
++
++ /* Put result in desired memory area. */
++ return md5_finish_ctx (&ctx, resblock);
++}
++
++
++void
++md5_process_bytes ( const void *buffer, size_t len, struct md5_ctx *ctx)
++{
++ /* When we already have some bits in our internal buffer concatenate
++ both inputs first. */
++ if (ctx->buflen != 0)
++ {
++ size_t left_over = ctx->buflen;
++ size_t add = 128 - left_over > len ? len : 128 - left_over;
++
++ memcpy (&ctx->buffer[left_over], buffer, add);
++ ctx->buflen += add;
++
++ if (ctx->buflen > 64)
++ {
++ md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
++
++ ctx->buflen &= 63;
++ /* The regions in the following copy operation cannot overlap. */
++ memcpy (ctx->buffer, &ctx->buffer[(left_over + add) & ~63],
++ ctx->buflen);
++ }
++
++ buffer = (const char *) buffer + add;
++ len -= add;
++ }
++
++ /* Process available complete blocks. */
++ if (len >= 64)
++ {
++#if !_STRING_ARCH_unaligned
++/* To check alignment gcc has an appropriate operator. Other
++ compilers don't. */
++# if __GNUC__ >= 2
++# define UNALIGNED_P(p) (((md5_uintptr) p) % __alignof__ (md5_uint32) != 0)
++# else
++# define UNALIGNED_P(p) (((md5_uintptr) p) % sizeof (md5_uint32) != 0)
++# endif
++ if (UNALIGNED_P (buffer))
++ while (len > 64)
++ {
++ memcpy (ctx->buffer, buffer, 64);
++ md5_process_block (ctx->buffer, 64, ctx);
++ buffer = (const char *) buffer + 64;
++ len -= 64;
++ }
++ else
++#endif
++ {
++ md5_process_block (buffer, len & ~63, ctx);
++ buffer = (const char *) buffer + (len & ~63);
++ len &= 63;
++ }
++ }
++
++ /* Move remaining bytes in internal buffer. */
++ if (len > 0)
++ {
++ size_t left_over = ctx->buflen;
++
++ memcpy (&ctx->buffer[left_over], buffer, len);
++ left_over += len;
++ if (left_over >= 64)
++ {
++ md5_process_block (ctx->buffer, 64, ctx);
++ left_over -= 64;
++ memcpy (ctx->buffer, &ctx->buffer[64], left_over);
++ }
++ ctx->buflen = left_over;
++ }
++}
++
++
++/* These are the four functions used in the four steps of the MD5 algorithm
++ and defined in the RFC 1321. The first function is a little bit optimized
++ (as found in Colin Plumbs public domain implementation). */
++/* #define FF(b, c, d) ((b & c) | (~b & d)) */
++#define FF(b, c, d) (d ^ (b & (c ^ d)))
++#define FG(b, c, d) FF (d, b, c)
++#define FH(b, c, d) (b ^ c ^ d)
++#define FI(b, c, d) (c ^ (b | ~d))
++
++/* Process LEN bytes of BUFFER, accumulating context into CTX.
++ It is assumed that LEN % 64 == 0. */
++
++void
++md5_process_block (const void *buffer, size_t len, struct md5_ctx *ctx)
++{
++ md5_uint32 correct_words[16];
++ const md5_uint32 *words = (const md5_uint32 *) buffer;
++ size_t nwords = len / sizeof (md5_uint32);
++ const md5_uint32 *endp = words + nwords;
++ md5_uint32 A = ctx->A;
++ md5_uint32 B = ctx->B;
++ md5_uint32 C = ctx->C;
++ md5_uint32 D = ctx->D;
++
++ /* First increment the byte count. RFC 1321 specifies the possible
++ length of the file up to 2^64 bits. Here we only compute the
++ number of bytes. Do a double word increment. */
++ ctx->total[0] += len;
++ if (ctx->total[0] < len)
++ ++ctx->total[1];
++
++ /* Process all bytes in the buffer with 64 bytes in each round of
++ the loop. */
++ while (words < endp)
++ {
++ md5_uint32 *cwp = correct_words;
++ md5_uint32 A_save = A;
++ md5_uint32 B_save = B;
++ md5_uint32 C_save = C;
++ md5_uint32 D_save = D;
++
++ /* First round: using the given function, the context and a constant
++ the next context is computed. Because the algorithms processing
++ unit is a 32-bit word and it is determined to work on words in
++ little endian byte order we perhaps have to change the byte order
++ before the computation. To reduce the work for the next steps
++ we store the swapped words in the array CORRECT_WORDS. */
++
++#define OP(a, b, c, d, s, T) \
++ do \
++ { \
++ a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
++ ++words; \
++ a = rol (a, s); \
++ a += b; \
++ } \
++ while (0)
++
++ /* Before we start, one word to the strange constants.
++ They are defined in RFC 1321 as
++
++ T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64, or
++ perl -e 'foreach(1..64){printf "0x%08x\n", int (4294967296 * abs (sin $_))}'
++ */
++
++ /* Round 1. */
++ OP (A, B, C, D, 7, 0xd76aa478);
++ OP (D, A, B, C, 12, 0xe8c7b756);
++ OP (C, D, A, B, 17, 0x242070db);
++ OP (B, C, D, A, 22, 0xc1bdceee);
++ OP (A, B, C, D, 7, 0xf57c0faf);
++ OP (D, A, B, C, 12, 0x4787c62a);
++ OP (C, D, A, B, 17, 0xa8304613);
++ OP (B, C, D, A, 22, 0xfd469501);
++ OP (A, B, C, D, 7, 0x698098d8);
++ OP (D, A, B, C, 12, 0x8b44f7af);
++ OP (C, D, A, B, 17, 0xffff5bb1);
++ OP (B, C, D, A, 22, 0x895cd7be);
++ OP (A, B, C, D, 7, 0x6b901122);
++ OP (D, A, B, C, 12, 0xfd987193);
++ OP (C, D, A, B, 17, 0xa679438e);
++ OP (B, C, D, A, 22, 0x49b40821);
++
++ /* For the second to fourth round we have the possibly swapped words
++ in CORRECT_WORDS. Redefine the macro to take an additional first
++ argument specifying the function to use. */
++#undef OP
++#define OP(f, a, b, c, d, k, s, T) \
++ do \
++ { \
++ a += f (b, c, d) + correct_words[k] + T; \
++ a = rol (a, s); \
++ a += b; \
++ } \
++ while (0)
++
++ /* Round 2. */
++ OP (FG, A, B, C, D, 1, 5, 0xf61e2562);
++ OP (FG, D, A, B, C, 6, 9, 0xc040b340);
++ OP (FG, C, D, A, B, 11, 14, 0x265e5a51);
++ OP (FG, B, C, D, A, 0, 20, 0xe9b6c7aa);
++ OP (FG, A, B, C, D, 5, 5, 0xd62f105d);
++ OP (FG, D, A, B, C, 10, 9, 0x02441453);
++ OP (FG, C, D, A, B, 15, 14, 0xd8a1e681);
++ OP (FG, B, C, D, A, 4, 20, 0xe7d3fbc8);
++ OP (FG, A, B, C, D, 9, 5, 0x21e1cde6);
++ OP (FG, D, A, B, C, 14, 9, 0xc33707d6);
++ OP (FG, C, D, A, B, 3, 14, 0xf4d50d87);
++ OP (FG, B, C, D, A, 8, 20, 0x455a14ed);
++ OP (FG, A, B, C, D, 13, 5, 0xa9e3e905);
++ OP (FG, D, A, B, C, 2, 9, 0xfcefa3f8);
++ OP (FG, C, D, A, B, 7, 14, 0x676f02d9);
++ OP (FG, B, C, D, A, 12, 20, 0x8d2a4c8a);
++
++ /* Round 3. */
++ OP (FH, A, B, C, D, 5, 4, 0xfffa3942);
++ OP (FH, D, A, B, C, 8, 11, 0x8771f681);
++ OP (FH, C, D, A, B, 11, 16, 0x6d9d6122);
++ OP (FH, B, C, D, A, 14, 23, 0xfde5380c);
++ OP (FH, A, B, C, D, 1, 4, 0xa4beea44);
++ OP (FH, D, A, B, C, 4, 11, 0x4bdecfa9);
++ OP (FH, C, D, A, B, 7, 16, 0xf6bb4b60);
++ OP (FH, B, C, D, A, 10, 23, 0xbebfbc70);
++ OP (FH, A, B, C, D, 13, 4, 0x289b7ec6);
++ OP (FH, D, A, B, C, 0, 11, 0xeaa127fa);
++ OP (FH, C, D, A, B, 3, 16, 0xd4ef3085);
++ OP (FH, B, C, D, A, 6, 23, 0x04881d05);
++ OP (FH, A, B, C, D, 9, 4, 0xd9d4d039);
++ OP (FH, D, A, B, C, 12, 11, 0xe6db99e5);
++ OP (FH, C, D, A, B, 15, 16, 0x1fa27cf8);
++ OP (FH, B, C, D, A, 2, 23, 0xc4ac5665);
++
++ /* Round 4. */
++ OP (FI, A, B, C, D, 0, 6, 0xf4292244);
++ OP (FI, D, A, B, C, 7, 10, 0x432aff97);
++ OP (FI, C, D, A, B, 14, 15, 0xab9423a7);
++ OP (FI, B, C, D, A, 5, 21, 0xfc93a039);
++ OP (FI, A, B, C, D, 12, 6, 0x655b59c3);
++ OP (FI, D, A, B, C, 3, 10, 0x8f0ccc92);
++ OP (FI, C, D, A, B, 10, 15, 0xffeff47d);
++ OP (FI, B, C, D, A, 1, 21, 0x85845dd1);
++ OP (FI, A, B, C, D, 8, 6, 0x6fa87e4f);
++ OP (FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
++ OP (FI, C, D, A, B, 6, 15, 0xa3014314);
++ OP (FI, B, C, D, A, 13, 21, 0x4e0811a1);
++ OP (FI, A, B, C, D, 4, 6, 0xf7537e82);
++ OP (FI, D, A, B, C, 11, 10, 0xbd3af235);
++ OP (FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
++ OP (FI, B, C, D, A, 9, 21, 0xeb86d391);
++
++ /* Add the starting values of the context. */
++ A += A_save;
++ B += B_save;
++ C += C_save;
++ D += D_save;
++ }
++
++ /* Put checksum in context given as argument. */
++ ctx->A = A;
++ ctx->B = B;
++ ctx->C = C;
++ ctx->D = D;
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/md5.h b/libclamav/libmspack-0.4alpha/test/md5.h
+new file mode 100644
+index 000000000000..0d22a70a2ccd
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/md5.h
+@@ -0,0 +1,165 @@
++/* md5.h - Declaration of functions and data types used for MD5 sum
++ computing library functions.
++ Copyright (C) 1995, 1996, 1999 Free Software Foundation, Inc.
++ NOTE: The canonical source of this file is maintained with the GNU C
++ Library. Bugs can be reported to bug-glibc at prep.ai.mit.edu.
++
++ This program is free software; you can redistribute it and/or modify it
++ under the terms of the GNU General Public License as published by the
++ Free Software Foundation; either version 2, or (at your option) any
++ later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software Foundation,
++ Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
++
++#ifndef _MD5_H
++#define _MD5_H 1
++
++#include <stdio.h>
++
++#if defined HAVE_LIMITS_H || _LIBC
++# include <limits.h>
++#endif
++
++/* The following contortions are an attempt to use the C preprocessor
++ to determine an unsigned integral type that is 32 bits wide. An
++ alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
++ doing that would require that the configure script compile and *run*
++ the resulting executable. Locally running cross-compiled executables
++ is usually not possible. */
++
++#ifdef _LIBC
++# include <stdint.h>
++typedef uint32_t md5_uint32;
++typedef uintptr_t md5_uintptr;
++#else
++# if defined __STDC__ && __STDC__
++# define UINT_MAX_32_BITS 4294967295U
++# else
++# define UINT_MAX_32_BITS 0xFFFFFFFF
++# endif
++
++/* If UINT_MAX isn't defined, assume it's a 32-bit type.
++ This should be valid for all systems GNU cares about because
++ that doesn't include 16-bit systems, and only modern systems
++ (that certainly have <limits.h>) have 64+-bit integral types. */
++
++# ifndef UINT_MAX
++# define UINT_MAX UINT_MAX_32_BITS
++# endif
++
++# if UINT_MAX == UINT_MAX_32_BITS
++ typedef unsigned int md5_uint32;
++# else
++# if USHRT_MAX == UINT_MAX_32_BITS
++ typedef unsigned short md5_uint32;
++# else
++# if ULONG_MAX == UINT_MAX_32_BITS
++ typedef unsigned long md5_uint32;
++# else
++ /* The following line is intended to evoke an error.
++ Using #error is not portable enough. */
++ "Cannot determine unsigned 32-bit data type."
++# endif
++# endif
++# endif
++/* We have to make a guess about the integer type equivalent in size
++ to pointers which should always be correct. */
++typedef unsigned long int md5_uintptr;
++#endif
++
++#undef __P
++#if defined (__STDC__) && __STDC__
++#define __P(x) x
++#else
++#define __P(x) ()
++#endif
++
++/* Structure to save state of computation between the single steps. */
++struct md5_ctx
++{
++ md5_uint32 A;
++ md5_uint32 B;
++ md5_uint32 C;
++ md5_uint32 D;
++
++ md5_uint32 total[2];
++ md5_uint32 buflen;
++ char buffer[128];
++};
++
++/*
++ * The following three functions are build up the low level used in
++ * the functions `md5_stream' and `md5_buffer'.
++ */
++
++/* Initialize structure containing state of computation.
++ (RFC 1321, 3.3: Step 3) */
++extern void md5_init_ctx __P ((struct md5_ctx *ctx));
++
++/* Starting with the result of former calls of this function (or the
++ initialization function update the context for the next LEN bytes
++ starting at BUFFER.
++ It is necessary that LEN is a multiple of 64!!! */
++extern void md5_process_block __P ((const void *buffer, size_t len,
++ struct md5_ctx *ctx));
++
++/* Starting with the result of former calls of this function (or the
++ initialization function update the context for the next LEN bytes
++ starting at BUFFER.
++ It is NOT required that LEN is a multiple of 64. */
++extern void md5_process_bytes __P ((const void *buffer, size_t len,
++ struct md5_ctx *ctx));
++
++/* Process the remaining bytes in the buffer and put result from CTX
++ in first 16 bytes following RESBUF. The result is always in little
++ endian byte order, so that a byte-wise output yields to the wanted
++ ASCII representation of the message digest.
++
++ IMPORTANT: On some systems it is required that RESBUF be correctly
++ aligned for a 32 bits value. */
++extern void *md5_finish_ctx __P ((struct md5_ctx *ctx, void *resbuf));
++
++
++/* Put result from CTX in first 16 bytes following RESBUF. The result is
++ always in little endian byte order, so that a byte-wise output yields
++ to the wanted ASCII representation of the message digest.
++
++ IMPORTANT: On some systems it is required that RESBUF is correctly
++ aligned for a 32 bits value. */
++extern void *md5_read_ctx __P ((const struct md5_ctx *ctx, void *resbuf));
++
++
++/* Compute MD5 message digest for bytes read from STREAM. The
++ resulting message digest number will be written into the 16 bytes
++ beginning at RESBLOCK. */
++extern int md5_stream __P ((FILE *stream, void *resblock));
++
++/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The
++ result is always in little endian byte order, so that a byte-wise
++ output yields to the wanted ASCII representation of the message
++ digest. */
++extern void *md5_buffer __P ((const char *buffer, size_t len, void *resblock));
++
++/* The following is from gnupg-1.0.2's cipher/bithelp.h. */
++/* Rotate a 32 bit integer by n bytes */
++#if defined __GNUC__ && defined __i386__
++static inline md5_uint32
++rol(md5_uint32 x, int n)
++{
++ __asm__("roll %%cl,%0"
++ :"=r" (x)
++ :"0" (x),"c" (n));
++ return x;
++}
++#else
++# define rol(x,n) ( ((x) << (n)) | ((x) >> (32-(n))) )
++#endif
++
++#endif
+diff --git a/libclamav/libmspack-0.4alpha/test/md5_fh.h b/libclamav/libmspack-0.4alpha/test/md5_fh.h
+new file mode 100644
+index 000000000000..385426e2e81f
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/md5_fh.h
+@@ -0,0 +1,123 @@
++/* an mspack_system implementation which reads one or more files, and
++ * only writes to one file; the file is not actually written to, but
++ * an MD5 sum is computed and is available once the written-to file is
++ * closed. You can use anything for the written-to filename, NULL is
++ * probably the most obvious. The code is not multithreadable.
++ */
++
++#include <md5.h>
++#include <stdio.h>
++#include <stdarg.h>
++
++struct md5_ctx md5_context;
++char md5_string[33];
++
++struct mspack_file_p {
++ FILE *fh;
++};
++
++static struct mspack_file *m_open(struct mspack_system *self, const char *filename, int mode) {
++ struct mspack_file_p *fh;
++ if (mode != MSPACK_SYS_OPEN_WRITE &&
++ mode != MSPACK_SYS_OPEN_READ) return NULL;
++
++ if ((fh = (struct mspack_file_p *) malloc(sizeof(struct mspack_file_p)))) {
++ if (mode == MSPACK_SYS_OPEN_WRITE) {
++ fh->fh = NULL;
++ md5_init_ctx(&md5_context);
++ return (struct mspack_file *) fh;
++ }
++ else {
++ if ((fh->fh = fopen(filename, "rb")))
++ return (struct mspack_file *) fh;
++ }
++ /* error - free file handle and return NULL */
++ free(fh);
++ }
++ return NULL;
++}
++
++static void m_close(struct mspack_file *file) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self) {
++ if (self->fh) fclose(self->fh);
++ else {
++ unsigned char md5[16];
++ md5_finish_ctx(&md5_context, (void *) &md5);
++ snprintf(md5_string, sizeof(md5_string),
++ "%02x%02x%02x%02x%02x%02x%02x%02x"
++ "%02x%02x%02x%02x%02x%02x%02x%02x",
++ md5[0], md5[1], md5[2], md5[3],
++ md5[4], md5[5], md5[6], md5[7],
++ md5[8], md5[9], md5[10], md5[11],
++ md5[12], md5[13], md5[14], md5[15]);
++ }
++ free(self);
++ }
++}
++
++static int m_read(struct mspack_file *file, void *buffer, int bytes) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self && self->fh && buffer && bytes >= 0) {
++ size_t count = fread(buffer, 1, bytes, self->fh);
++ if (!ferror(self->fh)) return (int) count;
++ }
++ return -1;
++}
++
++static int m_write(struct mspack_file *file, void *buffer, int bytes) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (!self || self->fh || !buffer || bytes < 0) return -1;
++ md5_process_bytes(buffer, bytes, &md5_context);
++ return bytes;
++}
++
++static int m_seek(struct mspack_file *file, off_t offset, int mode) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++ if (self && self->fh) {
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START: mode = SEEK_SET; break;
++ case MSPACK_SYS_SEEK_CUR: mode = SEEK_CUR; break;
++ case MSPACK_SYS_SEEK_END: mode = SEEK_END; break;
++ default: return -1;
++ }
++#if HAVE_FSEEKO
++ return fseeko(self->fh, offset, mode);
++#else
++ return fseek(self->fh, offset, mode);
++#endif
++ }
++ return -1;
++}
++
++static off_t m_tell(struct mspack_file *file) {
++ struct mspack_file_p *self = (struct mspack_file_p *) file;
++#if HAVE_FSEEKO
++ return (self && self->fh) ? (off_t) ftello(self->fh) : 0;
++#else
++ return (self && self->fh) ? (off_t) ftell(self->fh) : 0;
++#endif
++}
++
++static void m_msg(struct mspack_file *file, const char *format, ...) {
++ va_list ap;
++ va_start(ap, format);
++ vfprintf(stderr, format, ap);
++ va_end(ap);
++ fputc((int) '\n', stderr);
++ fflush(stderr);
++}
++static void *m_alloc(struct mspack_system *self, size_t bytes) {
++ return malloc(bytes);
++}
++static void m_free(void *buffer) {
++ free(buffer);
++}
++static void m_copy(void *src, void *dest, size_t bytes) {
++ memcpy(dest, src, bytes);
++}
++
++static struct mspack_system read_files_write_md5 = {
++ &m_open, &m_close, &m_read, &m_write, &m_seek,
++ &m_tell, &m_msg, &m_alloc, &m_free, &m_copy, NULL
++};
+diff --git a/libclamav/libmspack-0.4alpha/test/multifh.c b/libclamav/libmspack-0.4alpha/test/multifh.c
+new file mode 100644
+index 000000000000..f7ed758c4da1
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/multifh.c
+@@ -0,0 +1,435 @@
++/* An implementation of the mspack_system interface which can access many
++ * things:
++ * - regular disk files
++ * - already opened stdio FILE* file pointers
++ * - open file descriptors
++ * - blocks of memory
++ */
++
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <stdarg.h>
++#include <string.h>
++#include <mspack.h>
++
++/* definitions */
++
++#define MTYPE_DISKFILE (0x01)
++#define MTYPE_STDIOFH (0x02)
++#define MTYPE_FILEDESC (0x03)
++#define MTYPE_MEMORY (0x04)
++
++struct m_filename {
++ unsigned char type; /* one of MTYPE_DISKFILE, STDIOFH, FILEDESC or MEMORY */
++ const char *filename; /* the user-friendly printable filename (may be NULL) */
++ union {
++ const char *diskfile; /* char *filename for MTYPE_DISKFILE */
++ FILE *stdiofh; /* FILE *existing_fh for MTYPE_STDIOFH */
++ int filedesc; /* int file_descriptor for MTYPE_FILEDESC */
++ struct {
++ unsigned char *data;
++ size_t length;
++ } memory;
++ } x;
++};
++
++struct m_file {
++ struct m_filename *file; /* pointer back to the m_filename data */
++ union {
++ FILE *fh; /* only used in DISKFILE, STDIOFH and FILEDESC types */
++ size_t position; /* only used in MEMORY types */
++ } x;
++};
++
++/* ------------------------------------------------------------------------ */
++/* mspack_system implementation */
++
++static void *m_alloc(struct mspack_system *self, size_t bytes) {
++ return malloc(bytes);
++}
++
++static void m_free(void *buffer) {
++ free(buffer);
++}
++
++static void m_copy(void *src, void *dest, size_t bytes) {
++ memcpy(dest, src, bytes);
++}
++
++/* A message printer that prints to stderr */
++static void m_msg(struct m_file *file, const char *format, ...) {
++ va_list ap;
++ if (file && file->file && file->file->filename) {
++ fprintf(stderr, "%s: ", file->file->filename);
++ }
++ va_start(ap, format);
++ vfprintf(stderr, format, ap);
++ va_end(ap);
++ fputc((int) '\n', stderr);
++ fflush(stderr);
++}
++
++
++static struct m_file *m_open_mem(struct mspack_system *self,
++ struct m_filename *fn, int mode)
++{
++ struct m_file *fh;
++
++ /* validate arguments of the filename */
++ if (!fn->x.memory.data) return NULL;
++ if (!fn->x.memory.length) return NULL;
++
++ if ((fh = (struct m_file *) m_alloc(self, sizeof(struct m_file)))) {
++ fh->x.position = (mode == MSPACK_SYS_OPEN_APPEND) ?
++ fn->x.memory.length : 0;
++ fh->file = fn;
++ }
++ return fh;
++}
++
++static struct m_file *m_open_file(struct mspack_system *self,
++ struct m_filename *fn, int mode)
++{
++ struct m_file *fh;
++ const char *fmode;
++ int fd;
++
++ switch (mode) {
++ case MSPACK_SYS_OPEN_READ: fmode = "rb"; break;
++ case MSPACK_SYS_OPEN_WRITE: fmode = "wb"; break;
++ case MSPACK_SYS_OPEN_UPDATE: fmode = "r+b"; break;
++ case MSPACK_SYS_OPEN_APPEND: fmode = "ab"; break;
++ default: return NULL;
++ }
++
++ /* validate the arguments in the provided filename */
++ switch (fn->type) {
++ case MTYPE_DISKFILE: if (!fn->x.diskfile) return NULL; break;
++ case MTYPE_STDIOFH: if (!fn->x.stdiofh) return NULL; break;
++ case MTYPE_FILEDESC: if (fn->x.filedesc < 0) return NULL; break;
++ }
++
++ /* allocate memory for the file handle */
++ if (!(fh = (struct m_file *) m_alloc(self, sizeof(struct m_file)))) return NULL;
++
++ /* open or duplicate the filehandle */
++ switch (fn->type) {
++ case MTYPE_DISKFILE:
++ fh->x.fh = fopen(fn->x.diskfile, fmode);
++ break;
++
++ case MTYPE_STDIOFH:
++ fd = fileno(fn->x.stdiofh);
++ fh->x.fh = (fd >= 0) ? fdopen(fd, fmode) : NULL;
++ break;
++
++ case MTYPE_FILEDESC:
++ fh->x.fh = fdopen(fn->x.filedesc, fmode);
++ break;
++ }
++
++ /* validate the new stdio filehandle */
++ if (fh->x.fh) {
++ fh->file = fn;
++ }
++ else {
++ free(fh);
++ fh = NULL;
++ }
++
++ return fh;
++}
++
++static struct m_file *m_open(struct mspack_system *self,
++ struct m_filename *fn, int mode)
++{
++ if (!self || !fn) return NULL;
++
++ switch (fn->type) {
++ case MTYPE_DISKFILE:
++ case MTYPE_STDIOFH:
++ case MTYPE_FILEDESC:
++ return m_open_file(self, fn, mode);
++
++ case MTYPE_MEMORY:
++ return m_open_mem(self, fn, mode);
++ }
++ return NULL;
++}
++
++static void m_close(struct m_file *fh) {
++ if (!fh || !fh->file) return;
++ if (fh->file->type != MTYPE_MEMORY) fclose(fh->x.fh);
++ m_free(fh);
++}
++
++
++static int m_read(struct m_file *fh, void *buffer, int bytes) {
++ if (!fh || !fh->file || !buffer || bytes < 0) return -1;
++
++ if (fh->file->type == MTYPE_MEMORY) {
++ int count = fh->file->x.memory.length - fh->x.position;
++ if (count > bytes) count = bytes;
++ if (count > 0) {
++ m_copy(&fh->file->x.memory.data[fh->x.position], buffer, (size_t) count);
++ }
++ fh->x.position += count;
++ return count;
++ }
++ else {
++ size_t count = fread(buffer, 1, (size_t) bytes, fh->x.fh);
++ if (!ferror(fh->x.fh)) return (int) count;
++ }
++ return -1;
++}
++
++
++static int m_write(struct m_file *fh, void *buffer, int bytes) {
++ if (!fh || !fh->file || !buffer || bytes < 0) return -1;
++
++ if (fh->file->type == MTYPE_MEMORY) {
++ int count = fh->file->x.memory.length - fh->x.position;
++ if (count > bytes) count = bytes;
++ if (count > 0) {
++ m_copy(buffer, &fh->file->x.memory.data[fh->x.position], (size_t) count);
++ }
++ fh->x.position += count;
++ return count;
++ }
++ else {
++ size_t count = fwrite(buffer, 1, (size_t) bytes, fh->x.fh);
++ if (!ferror(fh->x.fh)) return (int) count;
++ }
++ return -1;
++}
++
++
++static int m_seek(struct m_file *fh, off_t offset, int mode) {
++ if (!fh || !fh->file) return 1;
++
++ if (fh->file->type == MTYPE_MEMORY) {
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START:
++ break;
++ case MSPACK_SYS_SEEK_CUR:
++ offset += (off_t) fh->x.position;
++ break;
++ case MSPACK_SYS_SEEK_END:
++ offset += (off_t) fh->file->x.memory.length;
++ break;
++ default:
++ return 1;
++ }
++
++ if (offset < 0) return 1;
++ if (offset > (off_t) fh->file->x.memory.length) return 1;
++ fh->x.position = (size_t) offset;
++ return 0;
++ }
++
++ /* file IO based method */
++ switch (mode) {
++ case MSPACK_SYS_SEEK_START: mode = SEEK_SET; break;
++ case MSPACK_SYS_SEEK_CUR: mode = SEEK_CUR; break;
++ case MSPACK_SYS_SEEK_END: mode = SEEK_END; break;
++ default: return 1;
++ }
++#if HAVE_FSEEKO
++ return fseeko(fh->x.fh, offset, mode);
++#else
++ return fseek(fh->x.fh, offset, mode);
++#endif
++}
++
++
++static off_t m_tell(struct m_file *fh) {
++ if (!fh || !fh->file) return -1;
++ if (fh->file->type == MTYPE_MEMORY) {
++ return (off_t) fh->x.position;
++ }
++#if HAVE_FSEEKO
++ return (off_t) ftello(fh->x.fh);
++#else
++ return (off_t) ftell(fh->x.fh);
++#endif
++}
++
++
++static struct mspack_system multi_system = {
++ (struct mspack_file * (*)(struct mspack_system *, const char *, int)) &m_open,
++ (void (*)(struct mspack_file *)) &m_close,
++ (int (*)(struct mspack_file *, void *, int)) &m_read,
++ (int (*)(struct mspack_file *, void *, int)) &m_write,
++ (int (*)(struct mspack_file *, off_t, int)) &m_seek,
++ (off_t (*)(struct mspack_file *)) &m_tell,
++ (void (*)(struct mspack_file *, const char *, ...)) &m_msg,
++ &m_alloc,
++ &m_free,
++ &m_copy,
++ NULL
++};
++
++/* ------------------------------------------------------------------------ */
++/* constructors and destructor */
++
++const char *create_filename(const char *filename) {
++ struct m_filename *fn;
++
++ if (!filename) return NULL; /* filename must not be null */
++
++ if ((fn = (struct m_filename *) malloc(sizeof(struct m_filename)))) {
++ fn->type = MTYPE_DISKFILE;
++ fn->filename = filename; /* pretty-printable filename */
++ fn->x.diskfile = filename;
++ }
++ return (const char *) fn;
++}
++
++const char *create_filename_from_handle(FILE *fh) {
++ struct m_filename *fn;
++
++ if (!fh) return NULL; /* file handle must not be null */
++
++ if ((fn = (struct m_filename *) malloc(sizeof(struct m_filename)))) {
++ fn->type = MTYPE_STDIOFH;
++ fn->filename = NULL; /* pretty-printable filename */
++ fn->x.stdiofh = fh;
++ }
++ return (const char *) fn;
++}
++
++const char *create_filename_from_descriptor(int fd) {
++ struct m_filename *fn;
++
++ if (fd < 0) return NULL; /* file descriptor must be valid */
++
++ if ((fn = (struct m_filename *) malloc(sizeof(struct m_filename)))) {
++ fn->type = MTYPE_FILEDESC;
++ fn->filename = NULL; /* pretty-printable filename */
++ fn->x.filedesc = fd;
++ }
++ return (const char *) fn;
++}
++
++const char *create_filename_from_memory(void *data, size_t length) {
++ struct m_filename *fn;
++
++ if (!data) return NULL; /* data pointer must not be NULL */
++ if (length == 0) return NULL; /* length must not be zero */
++
++ if ((fn = (struct m_filename *) malloc(sizeof(struct m_filename)))) {
++ fn->type = MTYPE_MEMORY;
++ fn->filename = NULL; /* pretty-printable filename */
++ fn->x.memory.data = (unsigned char *) data;
++ fn->x.memory.length = length;
++ }
++ return (const char *) fn;
++}
++
++void set_filename_printable_name(const char *filename, const char *name) {
++ struct m_filename *fn = (struct m_filename *) filename;
++ if (!fn) return;
++ /* very basic validation of structure */
++ if ((fn->type < MTYPE_DISKFILE) || (fn->type > MTYPE_MEMORY)) return;
++ fn->filename = name;
++}
++
++void free_filename(const char *filename) {
++ free((void *) filename);
++}
++
++/* ------------------------------------------------------------------------ */
++/* example of usage with mscab_decompressor */
++
++/* a simple cabinet */
++static unsigned char memory_cab[] = {
++ 0x4D,0x53,0x43,0x46,0x00,0x00,0x00,0x00,0xFD,0x00,0x00,0x00,0x00,0x00,0x00,
++ 0x00,0x2C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x01,0x01,0x00,0x02,0x00,
++ 0x00,0x00,0x22,0x06,0x00,0x00,0x5E,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x4D,
++ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x6C,0x22,0xBA,0x59,0x20,0x00,
++ 0x68,0x65,0x6C,0x6C,0x6F,0x2E,0x63,0x00,0x4A,0x00,0x00,0x00,0x4D,0x00,0x00,
++ 0x00,0x00,0x00,0x6C,0x22,0xE7,0x59,0x20,0x00,0x77,0x65,0x6C,0x63,0x6F,0x6D,
++ 0x65,0x2E,0x63,0x00,0xBD,0x5A,0xA6,0x30,0x97,0x00,0x97,0x00,0x23,0x69,0x6E,
++ 0x63,0x6C,0x75,0x64,0x65,0x20,0x3C,0x73,0x74,0x64,0x69,0x6F,0x2E,0x68,0x3E,
++ 0x0D,0x0A,0x0D,0x0A,0x76,0x6F,0x69,0x64,0x20,0x6D,0x61,0x69,0x6E,0x28,0x76,
++ 0x6F,0x69,0x64,0x29,0x0D,0x0A,0x7B,0x0D,0x0A,0x20,0x20,0x20,0x20,0x70,0x72,
++ 0x69,0x6E,0x74,0x66,0x28,0x22,0x48,0x65,0x6C,0x6C,0x6F,0x2C,0x20,0x77,0x6F,
++ 0x72,0x6C,0x64,0x21,0x5C,0x6E,0x22,0x29,0x3B,0x0D,0x0A,0x7D,0x0D,0x0A,0x23,
++ 0x69,0x6E,0x63,0x6C,0x75,0x64,0x65,0x20,0x3C,0x73,0x74,0x64,0x69,0x6F,0x2E,
++ 0x68,0x3E,0x0D,0x0A,0x0D,0x0A,0x76,0x6F,0x69,0x64,0x20,0x6D,0x61,0x69,0x6E,
++ 0x28,0x76,0x6F,0x69,0x64,0x29,0x0D,0x0A,0x7B,0x0D,0x0A,0x20,0x20,0x20,0x20,
++ 0x70,0x72,0x69,0x6E,0x74,0x66,0x28,0x22,0x57,0x65,0x6C,0x63,0x6F,0x6D,0x65,
++ 0x21,0x5C,0x6E,0x22,0x29,0x3B,0x0D,0x0A,0x7D,0x0D,0x0A,0x0D,0x0A
++};
++
++int main() {
++ const char *mem_cab, *std_out, *std_err, *example;
++ struct mscab_decompressor *cabd;
++ struct mscabd_cabinet *cab;
++ struct mscabd_file *file;
++ int err;
++
++ mem_cab = create_filename_from_memory(&memory_cab[0], sizeof(memory_cab));
++ if (!mem_cab) exit(1);
++
++ std_out = create_filename_from_descriptor(1);
++ if (!std_out) exit(1);
++
++ std_err = create_filename_from_handle(stderr);
++ if (!std_err) exit(1);
++
++ example = create_filename("example.txt");
++ if (!example) exit(1);
++
++ set_filename_printable_name(mem_cab, "internal");
++ set_filename_printable_name(std_out, "stdout");
++ set_filename_printable_name(std_err, "stderr");
++
++ /* if self-test reveals an error */
++ MSPACK_SYS_SELFTEST(err);
++ if (err) exit(1);
++
++ /* create a cab decompressor using our custom mspack_system interface */
++ if ((cabd = mspack_create_cab_decompressor(&multi_system))) {
++
++ /* open a cab file direct from memory */
++ if ((cab = cabd->open(cabd, mem_cab))) {
++
++ /* first file in the cabinet: print it to stdout */
++ file = cab->files;
++ if (cabd->extract(cabd, file, std_out)) {
++ exit(1);
++ }
++
++ /* second file in the cabinet: print it to stderr */
++ file = file->next;
++ if (cabd->extract(cabd, file, std_err)) {
++ exit(1);
++ }
++ /* also write it to "example.txt" */
++ if (cabd->extract(cabd, file, example)) {
++ exit(1);
++ }
++ cabd->close(cabd, cab);
++ }
++ else {
++ fprintf(stderr, "can't open cabinet (%d)\n", cabd->last_error(cabd));
++ }
++ mspack_destroy_cab_decompressor(cabd);
++ }
++ else {
++ fprintf(stderr, "can't make decompressor\n");
++ }
++
++ free_filename(example);
++ free_filename(std_err);
++ free_filename(std_out);
++ free_filename(mem_cab);
++
++ return 0;
++
++}
+diff --git a/libclamav/libmspack-0.4alpha/test/oabx.c b/libclamav/libmspack-0.4alpha/test/oabx.c
+new file mode 100644
+index 000000000000..53f675c68219
+--- /dev/null
++++ b/libclamav/libmspack-0.4alpha/test/oabx.c
+@@ -0,0 +1,41 @@
++#ifdef HAVE_CONFIG_H
++#include <config.h>
++#endif
++
++#include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
++#include <mspack.h>
++
++#include <error.h>
++
++int main(int argc, char *argv[]) {
++ struct msoab_decompressor *oabd;
++ int err;
++
++ setbuf(stdout, NULL);
++ setbuf(stderr, NULL);
++
++ MSPACK_SYS_SELFTEST(err);
++ if (err) return 0;
++
++ if ((oabd = mspack_create_oab_decompressor(NULL))) {
++ if (argc == 3) {
++ err = oabd->decompress(oabd, argv[1], argv[2]);
++ if (err) fprintf(stderr, "%s -> %s: %s\n", argv[1], argv[2], error_msg(err));
++ }
++ else if (argc == 4) {
++ err = oabd->decompress_incremental(oabd, argv[2], argv[1], argv[3]);
++ if (err) fprintf(stderr, "%s + %s -> %s: %s\n", argv[1], argv[2], argv[3], error_msg(err));
++ }
++ else {
++ fprintf(stderr, "Usage: %s <input> <output>\n", *argv);
++ fprintf(stderr, " or %s <base> <patch> <output>\n", *argv);
++ }
++ mspack_destroy_oab_decompressor(oabd);
++ }
++ else {
++ fprintf(stderr, "%s: can't make OAB decompressor\n", *argv);
++ }
++ return 0;
++}
diff --git a/recipes-security/clamav/clamav-0.98.5/0012-allow-to-use-internal-libmspack-if-the-external-is-n.patch b/recipes-security/clamav/clamav-0.98.5/0012-allow-to-use-internal-libmspack-if-the-external-is-n.patch
new file mode 100644
index 0000000..798aeba
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0012-allow-to-use-internal-libmspack-if-the-external-is-n.patch
@@ -0,0 +1,106 @@
+From 2bb998ed68841356499fe5c5cde875e87563572c Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Wed, 30 Jul 2014 21:59:17 +0200
+Subject: allow to use internal libmspack if the external is not available
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ configure.ac | 16 ++++++++++++++--
+ libclamav/Makefile.am | 30 +++++++++++++++++++++++++++++-
+ 2 files changed, 43 insertions(+), 3 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index 02caad29410a..5abe018a00b0 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -131,6 +131,18 @@ m4_include([m4/reorganization/libs/curl.m4])
+
+ m4_include([m4/reorganization/substitutions.m4])
+
++PKG_CHECK_MODULES([LIBMSPACK], [libmspack],
++ use_internal_mspack=no, use_internal_mspack=yes)
++
++AM_CONDITIONAL([USE_INTERNAL_MSPACK], test "x$use_internal_mspack" = "xyes")
++
++if test "x$use_internal_mspack" = "xyes"; then
++ mspack_msg="Internal"
++ AC_CONFIG_SUBDIRS([libclamav/libmspack-0.4alpha])
++else
++ mspack_msg="External, $LIBMSPACK_CFLAGS $LIBMSPACK_LIBS"
++fi
++
+ AM_CONDITIONAL([ENABLE_CLAMSUBMIT], [test "$have_curl" = "yes"])
+
+ AC_CONFIG_FILES([
+@@ -178,8 +190,6 @@ fi
+ AM_CONDITIONAL([ENABLE_LLVM],
+ [test "$subdirfailed" != "yes" && test "$enable_llvm" != "no"])
+
+-PKG_CHECK_MODULES([LIBMSPACK], [libmspack])
+-
+ no_recursion="yes";
+ AC_OUTPUT([libclamav/Makefile])
+
+@@ -236,6 +246,8 @@ if test "x$PCRE_HOME" = "x"; then
+ else
+ CL_MSG_STATUS([pcre ],[$PCRE_HOME],[$have_pcre])
+ fi
++CL_MSG_STATUS([preclass ],[$LIBJSON_HOME],[$have_json])
++CL_MSG_STATUS([libmspack ],[yes],[$mspack_msg])
+ if test "x$XML_LIBS" = "x"; then
+ CL_MSG_STATUS([dmg and xar ],[no],[])
+ else
+diff --git a/libclamav/Makefile.am b/libclamav/Makefile.am
+index 538e83dcdd03..6d2cf920d6e2 100644
+--- a/libclamav/Makefile.am
++++ b/libclamav/Makefile.am
+@@ -122,11 +122,12 @@ libclamav_internal_utils_nothreads_la_SOURCES=str.c\
+ libclamav_internal_utils_nothreads_la_LDFLAGS=-static @SSL_LDFLAGS@ @JSON_LDFLAGS@
+ libclamav_internal_utils_nothreads_la_CFLAGS=$(AM_CFLAGS) -DCL_NOTHREADS @SSL_CPPFLAGS@ @JSON_CPPFLAGS@
+ libclamav_internal_utils_nothreads_la_LIBADD=@SSL_LIBS@ @JSON_LIBS@
++SUBDIRS=
+
+ if ENABLE_LLVM
+ LLVMLIBADD=c++/libclamavcxx.la -lstdc++ -lm
+ LLVMDEP=c++/libclamavcxx.la
+-SUBDIRS=c++
++SUBDIRS+=c++
+ else
+ LLVMLIBADD=libclamav_nocxx.la
+ LLVMDEP=libclamav_nocxx.la
+@@ -147,8 +148,35 @@ if VERSIONSCRIPT
+ libclamav_la_LDFLAGS += -Wl, at VERSIONSCRIPTFLAG@, at top_srcdir@/libclamav/libclamav.map
+ endif
+
++if USE_INTERNAL_MSPACK
++SUBDIRS += libmspack-0.4alpha
++libclamav_la_CFLAGS += -I at top_srcdir@/libclamav/libmspack-0.4alpha/mspack
++libclamav_la_LIBADD += @top_builddir@/libclamav/libmspack-0.4alpha/.libs/cabc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/system.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/kwajd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/hlpc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/chmd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/qtmd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/litc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/oabc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/lzxd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/litd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/crc32.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/lzssd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/kwajc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/cabd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/szddd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/lzxc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/mszipd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/szddc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/oabd.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/chmc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/mszipc.o \
++ @top_builddir@/libclamav/libmspack-0.4alpha/.libs/hlpd.o
++else
+ libclamav_la_CFLAGS += $(LIBMSPACK_CFLAGS)
+ libclamav_la_LDFLAGS += $(LIBMSPACK_LIBS)
++endif
+
+ include_HEADERS = clamav.h
+
diff --git a/recipes-security/clamav/clamav-0.98.5/0013-fix-autoreconf-with-embedded-libmspack.patch b/recipes-security/clamav/clamav-0.98.5/0013-fix-autoreconf-with-embedded-libmspack.patch
new file mode 100644
index 0000000..f7175d3
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0013-fix-autoreconf-with-embedded-libmspack.patch
@@ -0,0 +1,27 @@
+From b1ab1a88f38c9d9cea2433dac33b8ecb31b3c799 Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Mon, 22 Sep 2014 21:50:05 +0200
+Subject: fix autoreconf with embedded libmspack
+
+---
+ libclamav/libmspack-0.4alpha/NEWS | 1 +
+ libclamav/libmspack-0.4alpha/configure.ac | 2 +-
+ 2 files changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/libclamav/libmspack-0.4alpha/NEWS b/libclamav/libmspack-0.4alpha/NEWS
+index e69de29bb2d1..8d1c8b69c3fc 100644
+--- a/libclamav/libmspack-0.4alpha/NEWS
++++ b/libclamav/libmspack-0.4alpha/NEWS
+@@ -0,0 +1 @@
++
+diff --git a/libclamav/libmspack-0.4alpha/configure.ac b/libclamav/libmspack-0.4alpha/configure.ac
+index 55fb6ce5ee9d..1fc98577f152 100644
+--- a/libclamav/libmspack-0.4alpha/configure.ac
++++ b/libclamav/libmspack-0.4alpha/configure.ac
+@@ -46,5 +46,5 @@ AC_SYS_LARGEFILE
+ AC_FUNC_FSEEKO
+
+ # Checks for library functions.
+-AC_CONFIG_FILES([Makefile doc/Makefile doc/Doxyfile libmspack.pc])
++AC_CONFIG_FILES([Makefile libmspack.pc])
+ AC_OUTPUT
diff --git a/recipes-security/clamav/clamav-0.98.5/0014-remove-AC_CONFIG_SRCDIR-llvm-configure-from-libclama.patch b/recipes-security/clamav/clamav-0.98.5/0014-remove-AC_CONFIG_SRCDIR-llvm-configure-from-libclama.patch
new file mode 100644
index 0000000..8bd2491
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0014-remove-AC_CONFIG_SRCDIR-llvm-configure-from-libclama.patch
@@ -0,0 +1,23 @@
+From 573da4644d9dbcff3107c4bc3a8a346a5ba0b84d Mon Sep 17 00:00:00 2001
+From: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
+Date: Tue, 14 Oct 2014 20:16:04 +0200
+Subject: remove AC_CONFIG_SRCDIR([llvm/configure]) from
+ libclamav/c++/configure.ac to allow compilation without the
+ libclamav/c++/llvm directory
+
+---
+ libclamav/c++/configure.ac | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/libclamav/c++/configure.ac b/libclamav/c++/configure.ac
+index 3c7c7e26fbf8..43e187ff1f56 100644
+--- a/libclamav/c++/configure.ac
++++ b/libclamav/c++/configure.ac
+@@ -16,7 +16,6 @@ dnl MA 02110-1301, USA.
+ AC_PREREQ([2.59])
+ AC_INIT([libclamavc++],[devel],[http://bugs.clamav.net])
+ AC_CONFIG_AUX_DIR([config])
+-AC_CONFIG_SRCDIR([llvm/configure])
+ AC_CONFIG_MACRO_DIR([m4])
+ AC_CONFIG_HEADER([clamavcxx-config.h])
+ AC_CANONICAL_TARGET
diff --git a/recipes-security/clamav/clamav-0.98.5/0015-bb-10731-Allow-to-specificy-a-group-for-the-socket-o.patch b/recipes-security/clamav/clamav-0.98.5/0015-bb-10731-Allow-to-specificy-a-group-for-the-socket-o.patch
new file mode 100644
index 0000000..8619a51
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0015-bb-10731-Allow-to-specificy-a-group-for-the-socket-o.patch
@@ -0,0 +1,229 @@
+From 9ba0bd8840f8be4cccaf8134b65a012dffdd8ae0 Mon Sep 17 00:00:00 2001
+From: Shawn Webb <swebb at sourcefire.com>
+Date: Thu, 31 Jul 2014 11:50:23 -0400
+Subject: bb#10731 - Allow to specificy a group for the socket of which the
+ user is not a member
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ clamav-milter/clamav-milter.c | 193 +++++++++++++++++++++---------------------
+ 1 file changed, 98 insertions(+), 95 deletions(-)
+
+diff --git a/clamav-milter/clamav-milter.c b/clamav-milter/clamav-milter.c
+index 2c7a4d7d3414..99e7fe7fac04 100644
+--- a/clamav-milter/clamav-milter.c
++++ b/clamav-milter/clamav-milter.c
+@@ -116,6 +116,104 @@ int main(int argc, char **argv) {
+ }
+ }
+
++ if(!(my_socket = optget(opts, "MilterSocket")->strarg)) {
++ logg("!Please configure the MilterSocket directive\n");
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++
++ if(smfi_setconn(my_socket) == MI_FAILURE) {
++ logg("!smfi_setconn failed\n");
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ if(smfi_register(descr) == MI_FAILURE) {
++ logg("!smfi_register failed\n");
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ opt = optget(opts, "FixStaleSocket");
++ umsk = umask(0777); /* socket is created with 000 to avoid races */
++ if(smfi_opensocket(opt->enabled) == MI_FAILURE) {
++ logg("!Failed to create socket %s\n", my_socket);
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ umask(umsk); /* restore umask */
++ if(strncmp(my_socket, "inet:", 5) && strncmp(my_socket, "inet6:", 6)) {
++ /* set group ownership and perms on the local socket */
++ char *sock_name = my_socket;
++ mode_t sock_mode;
++ if(!strncmp(my_socket, "unix:", 5))
++ sock_name += 5;
++ if(!strncmp(my_socket, "local:", 6))
++ sock_name += 6;
++ if(*my_socket == ':')
++ sock_name ++;
++
++ if(optget(opts, "MilterSocketGroup")->enabled) {
++ char *gname = optget(opts, "MilterSocketGroup")->strarg, *end;
++ gid_t sock_gid = strtol(gname, &end, 10);
++ if(*end) {
++ struct group *pgrp = getgrnam(gname);
++ if(!pgrp) {
++ logg("!Unknown group %s\n", gname);
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ sock_gid = pgrp->gr_gid;
++ }
++ if(chown(sock_name, -1, sock_gid)) {
++ logg("!Failed to change socket ownership to group %s\n", gname);
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ }
++
++ if ((opt = optget(opts, "User"))->enabled) {
++ struct passwd *user;
++ if ((user = getpwnam(opt->strarg)) == NULL) {
++ logg("ERROR: Can't get information about user %s.\n",
++ opt->strarg);
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++
++ if(chown(sock_name, user->pw_uid, -1)) {
++ logg("!Failed to change socket ownership to user %s\n", user->pw_name);
++ optfree(opts);
++ logg_close();
++ return 1;
++ }
++ }
++
++ if(optget(opts, "MilterSocketMode")->enabled) {
++ char *end;
++ sock_mode = strtol(optget(opts, "MilterSocketMode")->strarg, &end, 8);
++ if(*end) {
++ logg("!Invalid MilterSocketMode %s\n", optget(opts, "MilterSocketMode")->strarg);
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ } else
++ sock_mode = 0777 & ~umsk;
++
++ if(chmod(sock_name, sock_mode & 0666)) {
++ logg("!Cannot set milter socket permission to %s\n", optget(opts, "MilterSocketMode")->strarg);
++ logg_close();
++ optfree(opts);
++ return 1;
++ }
++ }
++
+ if(geteuid() == 0 && (opt = optget(opts, "User"))->enabled) {
+ struct passwd *user = NULL;
+ if((user = getpwnam(opt->strarg)) == NULL) {
+@@ -248,15 +346,6 @@ int main(int argc, char **argv) {
+
+ multircpt = optget(opts, "SupportMultipleRecipients")->enabled;
+
+- if(!(my_socket = optget(opts, "MilterSocket")->strarg)) {
+- logg("!Please configure the MilterSocket directive\n");
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+-
+ if(!optget(opts, "Foreground")->enabled) {
+ if(daemonize() == -1) {
+ logg("!daemonize() failed\n");
+@@ -271,92 +360,6 @@ int main(int argc, char **argv) {
+ logg("^Can't change current working directory to root\n");
+ }
+
+- if(smfi_setconn(my_socket) == MI_FAILURE) {
+- logg("!smfi_setconn failed\n");
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- if(smfi_register(descr) == MI_FAILURE) {
+- logg("!smfi_register failed\n");
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- opt = optget(opts, "FixStaleSocket");
+- umsk = umask(0777); /* socket is created with 000 to avoid races */
+- if(smfi_opensocket(opt->enabled) == MI_FAILURE) {
+- logg("!Failed to create socket %s\n", my_socket);
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- umask(umsk); /* restore umask */
+- if(strncmp(my_socket, "inet:", 5) && strncmp(my_socket, "inet6:", 6)) {
+- /* set group ownership and perms on the local socket */
+- char *sock_name = my_socket;
+- mode_t sock_mode;
+- if(!strncmp(my_socket, "unix:", 5))
+- sock_name += 5;
+- if(!strncmp(my_socket, "local:", 6))
+- sock_name += 6;
+- if(*my_socket == ':')
+- sock_name ++;
+-
+- if(optget(opts, "MilterSocketGroup")->enabled) {
+- char *gname = optget(opts, "MilterSocketGroup")->strarg, *end;
+- gid_t sock_gid = strtol(gname, &end, 10);
+- if(*end) {
+- struct group *pgrp = getgrnam(gname);
+- if(!pgrp) {
+- logg("!Unknown group %s\n", gname);
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- sock_gid = pgrp->gr_gid;
+- }
+- if(chown(sock_name, -1, sock_gid)) {
+- logg("!Failed to change socket ownership to group %s\n", gname);
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- }
+- if(optget(opts, "MilterSocketMode")->enabled) {
+- char *end;
+- sock_mode = strtol(optget(opts, "MilterSocketMode")->strarg, &end, 8);
+- if(*end) {
+- logg("!Invalid MilterSocketMode %s\n", optget(opts, "MilterSocketMode")->strarg);
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- } else
+- sock_mode = 0777 & ~umsk;
+-
+- if(chmod(sock_name, sock_mode & 0666)) {
+- logg("!Cannot set milter socket permission to %s\n", optget(opts, "MilterSocketMode")->strarg);
+- localnets_free();
+- whitelist_free();
+- logg_close();
+- optfree(opts);
+- return 1;
+- }
+- }
+-
+ maxfilesize = optget(opts, "MaxFileSize")->numarg;
+ if(!maxfilesize) {
+ logg("^Invalid MaxFileSize, using default (%d)\n", CLI_DEFAULT_MAXFILESIZE);
diff --git a/recipes-security/clamav/clamav-0.98.5/0016-clamav-milter-add-additinal-SMFIF_-flags-before-invo.patch b/recipes-security/clamav/clamav-0.98.5/0016-clamav-milter-add-additinal-SMFIF_-flags-before-invo.patch
new file mode 100644
index 0000000..621c6dc
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0016-clamav-milter-add-additinal-SMFIF_-flags-before-invo.patch
@@ -0,0 +1,86 @@
+From dbc72db36eced2d3ca7c5b7f14970528c435429e Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Sun, 26 Oct 2014 12:11:09 +0100
+Subject: clamav-milter: add additinal SMFIF_* flags before invoking
+ smfi_register()
+
+unfortunately after the shifting of the code (so that the socket could
+be part of a group which is not part of the clamav user) I forgot (or
+did not see it) to have the header flags added before the
+smfi_register() was invoked. As a result the socket was working but it
+was unable to add the X-Virus-Scanned & X-Virus-Status flags. This
+patch fixes the issue.
+
+https://bugzilla.clamav.net/show_bug.cgi?id=10731
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ clamav-milter/clamav-milter.c | 48 ++++++++++++++++++++++++-------------------
+ 1 file changed, 27 insertions(+), 21 deletions(-)
+
+diff --git a/clamav-milter/clamav-milter.c b/clamav-milter/clamav-milter.c
+index 99e7fe7fac04..22db98ab7c5e 100644
+--- a/clamav-milter/clamav-milter.c
++++ b/clamav-milter/clamav-milter.c
+@@ -116,6 +116,33 @@ int main(int argc, char **argv) {
+ }
+ }
+
++ pt = optget(opts, "AddHeader")->strarg;
++ if (strcasecmp(pt, "No")) {
++ char myname[255];
++
++ if (((opt = optget(opts, "ReportHostname"))->enabled &&
++ strncpy(myname, opt->strarg, sizeof(myname))) ||
++ !gethostname(myname, sizeof(myname))) {
++
++ myname[sizeof(myname)-1] = '\0';
++ snprintf(xvirushdr, sizeof(xvirushdr), "clamav-milter %s at %s",
++ get_version(), myname);
++ } else {
++ snprintf(xvirushdr, sizeof(xvirushdr), "clamav-milter %s",
++ get_version());
++ }
++ xvirushdr[sizeof(xvirushdr)-1] = '\0';
++
++ descr.xxfi_flags |= SMFIF_ADDHDRS;
++
++ if (strcasecmp(pt, "Add")) { /* Replace or Yes */
++ descr.xxfi_flags |= SMFIF_CHGHDRS;
++ addxvirus = 1;
++ } else { /* Add */
++ addxvirus = 2;
++ }
++ }
++
+ if(!(my_socket = optget(opts, "MilterSocket")->strarg)) {
+ logg("!Please configure the MilterSocket directive\n");
+ logg_close();
+@@ -323,27 +350,6 @@ int main(int argc, char **argv) {
+ return 1;
+ }
+
+- pt = optget(opts, "AddHeader")->strarg;
+- if(strcasecmp(pt, "No")) {
+- char myname[255];
+-
+- if(((opt = optget(opts, "ReportHostname"))->enabled && strncpy(myname, opt->strarg, sizeof(myname))) || !gethostname(myname, sizeof(myname))) {
+- myname[sizeof(myname)-1] = '\0';
+- snprintf(xvirushdr, sizeof(xvirushdr), "clamav-milter %s at %s", get_version(), myname);
+- } else
+- snprintf(xvirushdr, sizeof(xvirushdr), "clamav-milter %s", get_version());
+- xvirushdr[sizeof(xvirushdr)-1] = '\0';
+-
+- descr.xxfi_flags |= SMFIF_ADDHDRS;
+-
+- if(strcasecmp(pt, "Add")) { /* Replace or Yes */
+- descr.xxfi_flags |= SMFIF_CHGHDRS;
+- addxvirus = 1;
+- } else { /* Add */
+- addxvirus = 2;
+- }
+- }
+-
+ multircpt = optget(opts, "SupportMultipleRecipients")->enabled;
+
+ if(!optget(opts, "Foreground")->enabled) {
diff --git a/recipes-security/clamav/clamav-0.98.5/0017-Bump-.so-version-number.patch b/recipes-security/clamav/clamav-0.98.5/0017-Bump-.so-version-number.patch
new file mode 100644
index 0000000..2af0d0e
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0017-Bump-.so-version-number.patch
@@ -0,0 +1,22 @@
+From 6569ca8a084191f9fedde16abf8fa15b6ebef4fe Mon Sep 17 00:00:00 2001
+From: Shawn Webb <swebb at sourcefire.com>
+Date: Wed, 19 Nov 2014 11:51:22 -0500
+Subject: Bump .so version number
+
+---
+ m4/reorganization/version.m4 | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/m4/reorganization/version.m4 b/m4/reorganization/version.m4
+index ea263b28e647..f4fe8b1e150e 100644
+--- a/m4/reorganization/version.m4
++++ b/m4/reorganization/version.m4
+@@ -3,7 +3,7 @@ dnl VERSION="devel-`date +%Y%m%d`"
+ VERSION="0.98.5"
+
+ LC_CURRENT=7
+-LC_REVISION=22
++LC_REVISION=24
+ LC_AGE=1
+ LIBCLAMAV_VERSION="$LC_CURRENT":"$LC_REVISION":"$LC_AGE"
+ AC_SUBST([LIBCLAMAV_VERSION])
diff --git a/recipes-security/clamav/clamav-0.98.5/0018-llvm-don-t-use-system-libs.patch b/recipes-security/clamav/clamav-0.98.5/0018-llvm-don-t-use-system-libs.patch
new file mode 100644
index 0000000..5b1a606
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/0018-llvm-don-t-use-system-libs.patch
@@ -0,0 +1,26 @@
+From 169677f7699f78d483c84b4ab54943ea622535c8 Mon Sep 17 00:00:00 2001
+From: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+Date: Wed, 19 Nov 2014 23:04:32 +0100
+Subject: llvm: don't use --system-libs
+
+this continues the saga of not linking the .a files so we don't care
+about the libs llvm links against (like -ledit)
+
+Signed-off-by: Sebastian Andrzej Siewior <sebastian at breakpoint.cc>
+---
+ libclamav/c++/configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/libclamav/c++/configure.ac b/libclamav/c++/configure.ac
+index 43e187ff1f56..2d2d47b9d24c 100644
+--- a/libclamav/c++/configure.ac
++++ b/libclamav/c++/configure.ac
+@@ -115,7 +115,7 @@ if test "x$llvmconfig" != "x"; then
+ if test $llvmver_test -ge 350; then
+ dnl LLVM 3.5.0 and after splits linker flags into two sets
+ ldflags=`$llvmconfig --ldflags`
+- syslibs=`$llvmconfig --system-libs`
++ syslibs=
+ AC_SUBST(LLVMCONFIG_LDFLAGS, ["$ldflags $syslibs"])
+ else
+ AC_SUBST(LLVMCONFIG_LDFLAGS, [`$llvmconfig --ldflags`])
diff --git a/recipes-security/clamav/clamav-0.98.5/clamav-0001-clamdscan.patch b/recipes-security/clamav/clamav-0.98.5/clamav-0001-clamdscan.patch
new file mode 100644
index 0000000..2effdeb
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/clamav-0001-clamdscan.patch
@@ -0,0 +1,21 @@
+Fixes build error
+
+proto.c: In function 'dconnect':
+proto.c:86:67: error: invalid application of 'sizeof' to incomplete type 'struct sockaddr_un'
+if (connect(sockd, (struct sockaddr *)&nixsock, sizeof(nixsock)) == 0)
+
+Patch sent upstream: http://lurker.clamav.net/message/20140928.130829.5494fd68.en.html
+
+Signed-off-by: Bernd Kuhls <bernd.kuhls at t-online.de>
+
+diff -uNr a/clamdscan/proto.c b/clamdscan/proto.c
+--- a/clamdscan/proto.c 2014-05-06 20:39:56.000000000 +0200
++++ b/clamdscan/proto.c 2014-05-10 10:41:44.000000000 +0200
+@@ -35,6 +35,7 @@
+ #include <sys/stat.h>
+ #include <fcntl.h>
+ #include <sys/types.h>
++#include <sys/un.h>
+ #ifdef HAVE_SYS_SELECT_H
+ #include <sys/select.h>
+ #endif
diff --git a/recipes-security/clamav/clamav-0.98.5/clamav-freshclam.service b/recipes-security/clamav/clamav-0.98.5/clamav-freshclam.service
new file mode 100644
index 0000000..0c909fb
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/clamav-freshclam.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=ClamAV virus database updater
+Documentation=man:freshclam(1) man:freshclam.conf(5) http://www.clamav.net/lang/en/doc/
+# If user wants it run from cron, don't start the daemon.
+ConditionPathExists=!/etc/cron.d/clamav-freshclam
+
+[Service]
+ExecStart=/usr/bin/freshclam -d --foreground=true
+StandardOutput=syslog
+
+[Install]
+WantedBy=multi-user.target
diff --git a/recipes-security/clamav/clamav-0.98.5/clamav-milter.conf.sample b/recipes-security/clamav/clamav-0.98.5/clamav-milter.conf.sample
new file mode 100644
index 0000000..ed0d519
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/clamav-milter.conf.sample
@@ -0,0 +1,293 @@
+##
+## Example config file for clamav-milter
+##
+
+# Comment or remove the line below.
+Example
+
+
+##
+## Main options
+##
+
+# Define the interface through which we communicate with sendmail
+# This option is mandatory! Possible formats are:
+# [[unix|local]:]/path/to/file - to specify a unix domain socket
+# inet:port@[hostname|ip-address] - to specify an ipv4 socket
+# inet6:port@[hostname|ip-address] - to specify an ipv6 socket
+#
+# Default: no default
+#MilterSocket /tmp/clamav-milter.socket
+#MilterSocket inet:7357
+
+# Define the group ownership for the (unix) milter socket.
+# Default: disabled (the primary group of the user running clamd)
+#MilterSocketGroup virusgroup
+
+# Sets the permissions on the (unix) milter socket to the specified mode.
+# Default: disabled (obey umask)
+#MilterSocketMode 660
+
+# Remove stale socket after unclean shutdown.
+#
+# Default: yes
+#FixStaleSocket yes
+
+# Run as another user (clamav-milter must be started by root for this option to work)
+#
+# Default: unset (don't drop privileges)
+#User clamav
+
+# Initialize supplementary group access (clamav-milter must be started by root).
+#
+# Default: no
+#AllowSupplementaryGroups no
+
+# Waiting for data from clamd will timeout after this time (seconds).
+# Value of 0 disables the timeout.
+#
+# Default: 120
+#ReadTimeout 300
+
+# Don't fork into background.
+#
+# Default: no
+#Foreground yes
+
+# Chroot to the specified directory.
+# Chrooting is performed just after reading the config file and before dropping privileges.
+#
+# Default: unset (don't chroot)
+#Chroot /newroot
+
+# This option allows you to save a process identifier of the listening
+# daemon (main thread).
+#
+# Default: disabled
+#PidFile /var/run/clamav/clamav-milter.pid
+
+# Optional path to the global temporary directory.
+# Default: system specific (usually /tmp or /var/tmp).
+#
+#TemporaryDirectory /var/tmp
+
+##
+## Clamd options
+##
+
+# Define the clamd socket to connect to for scanning.
+# This option is mandatory! Syntax:
+# ClamdSocket unix:path
+# ClamdSocket tcp:host:port
+# The first syntax specifies a local unix socket (needs an absolute path) e.g.:
+# ClamdSocket unix:/var/run/clamd/clamd.socket
+# The second syntax specifies a tcp local or remote tcp socket: the
+# host can be a hostname or an ip address; the ":port" field is only required
+# for IPv6 addresses, otherwise it defaults to 3310, e.g.:
+# ClamdSocket tcp:192.168.0.1
+#
+# This option can be repeated several times with different sockets or even
+# with the same socket: clamd servers will be selected in a round-robin fashion.
+#
+# Default: no default
+ClamdSocket /var/run/clamav/clamd
+
+
+##
+## Exclusions
+##
+
+# Messages originating from these hosts/networks will not be scanned
+# This option takes a host(name)/mask pair in CIRD notation and can be
+# repeated several times. If "/mask" is omitted, a host is assumed.
+# To specify a locally orignated, non-smtp, email use the keyword "local"
+#
+# Default: unset (scan everything regardless of the origin)
+#LocalNet local
+#LocalNet 192.168.0.0/24
+#LocalNet 1111:2222:3333::/48
+
+# This option specifies a file which contains a list of basic POSIX regular
+# expressions. Addresses (sent to or from - see below) matching these regexes
+# will not be scanned. Optionally each line can start with the string "From:"
+# or "To:" (note: no whitespace after the colon) indicating if it is,
+# respectively, the sender or recipient that is to be whitelisted.
+# If the field is missing, "To:" is assumed.
+# Lines starting with #, : or ! are ignored.
+#
+# Default unset (no exclusion applied)
+#Whitelist /etc/whitelisted_addresses
+
+# Messages from authenticated SMTP users matching this extended POSIX
+# regular expression (egrep-like) will not be scanned.
+# As an alternative, a file containing a plain (not regex) list of names (one
+# per line) can be specified using the prefix "file:".
+# e.g. SkipAuthenticated file:/etc/good_guys
+#
+# Note: this is the AUTH login name!
+#
+# Default: unset (no whitelisting based on SMTP auth)
+#SkipAuthenticated ^(tom|dick|henry)$
+
+# Messages larger than this value won't be scanned.
+# Make sure this value is lower or equal than StreamMaxLength in clamd.conf
+#
+# Default: 25M
+#MaxFileSize 10M
+
+
+##
+## Actions
+##
+
+# The following group of options controls the delievery process under
+# different circumstances.
+# The following actions are available:
+# - Accept
+# The message is accepted for delievery
+# - Reject
+# Immediately refuse delievery (a 5xx error is returned to the peer)
+# - Defer
+# Return a temporary failure message (4xx) to the peer
+# - Blackhole (not available for OnFail)
+# Like Accept but the message is sent to oblivion
+# - Quarantine (not available for OnFail)
+# Like Accept but message is quarantined instead of being delivered
+#
+# NOTE: In Sendmail the quarantine queue can be examined via mailq -qQ
+# For Postfix this causes the message to be placed on hold
+#
+# Action to be performed on clean messages (mostly useful for testing)
+# Default: Accept
+#OnClean Accept
+
+# Action to be performed on infected messages
+# Default: Quarantine
+#OnInfected Quarantine
+
+# Action to be performed on error conditions (this includes failure to
+# allocate data structures, no scanners available, network timeouts,
+# unknown scanner replies and the like)
+# Default: Defer
+#OnFail Defer
+
+# This option allows to set a specific rejection reason for infected messages
+# and it's therefore only useful together with "OnInfected Reject"
+# The string "%v", if present, will be replaced with the virus name.
+# Default: MTA specific
+#RejectMsg
+
+# If this option is set to "Replace" (or "Yes"), an "X-Virus-Scanned" and an
+# "X-Virus-Status" headers will be attached to each processed message, possibly
+# replacing existing headers.
+# If it is set to Add, the X-Virus headers are added possibly on top of the
+# existing ones.
+# Note that while "Replace" can potentially break DKIM signatures, "Add" may
+# confuse procmail and similar filters.
+# Default: no
+#AddHeader Replace
+
+# When AddHeader is in use, this option allows to arbitrary set the reported
+# hostname. This may be desirable in order to avoid leaking internal names.
+# If unset the real machine name is used.
+# Default: disabled
+#ReportHostname my.mail.server.name
+
+# Execute a command (possibly searching PATH) when an infected message is found.
+# The following parameters are passed to the invoked program in this order:
+# virus name, queue id, sender, destination, subject, message id, message date.
+# Note #1: this requires MTA macroes to be available (see LogInfected below)
+# Note #2: the process is invoked in the context of clamav-milter
+# Note #3: clamav-milter will wait for the process to exit. Be quick or fork to
+# avoid unnecessary delays in email delievery
+# Default: disabled
+#VirusAction /usr/local/bin/my_infected_message_handler
+
+##
+## Logging options
+##
+
+# Uncomment this option to enable logging.
+# LogFile must be writable for the user running daemon.
+# A full path is required.
+#
+# Default: disabled
+#LogFile /var/log/clamav/clamav-milter.log
+
+# By default the log file is locked for writing - the lock protects against
+# running clamav-milter multiple times.
+# This option disables log file locking.
+#
+# Default: no
+#LogFileUnlock yes
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
+# rotation (the LogRotate option) will always be enabled.
+#
+# Default: 1M
+#LogFileMaxSize 2M
+
+# Log time with each message.
+#
+# Default: no
+#LogTime yes
+
+# Use system logger (can work together with LogFile).
+#
+# Default: no
+#LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+#
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable verbose logging.
+#
+# Default: no
+#LogVerbose yes
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# This option allows to tune what is logged when a message is infected.
+# Possible values are Off (the default - nothing is logged),
+# Basic (minimal info logged), Full (verbose info logged)
+# Note:
+# For this to work properly in sendmail, make sure the msg_id, mail_addr,
+# rcpt_addr and i macroes are available in eom. In other words add a line like:
+# Milter.macros.eom={msg_id}, {mail_addr}, {rcpt_addr}, i
+# to your .cf file. Alternatively use the macro:
+# define(`confMILTER_MACROS_EOM', `{msg_id}, {mail_addr}, {rcpt_addr}, i')
+# Postfix should be working fine with the default settings.
+#
+# Default: disabled
+#LogInfected Basic
+
+# This option allows to tune what is logged when no threat is found in a scanned message.
+# See LogInfected for possible values and caveats.
+# Useful in debugging but drastically increases the log size.
+# Default: disabled
+#LogClean Basic
+
+# This option affects the behaviour of LogInfected, LogClean and VirusAction
+# when a message with multiple recipients is scanned:
+# If SupportMultipleRecipients is off (the default)
+# then one single log entry is generated for the message and, in case the
+# message is determined to be malicious, the command indicated by VirusAction
+# is executed just once. In both cases only the last recipient is reported.
+# If SupportMultipleRecipients is on:
+# then one line is logged for each recipient and the command indicated
+# by VirusAction is also executed once for each recipient.
+#
+# Note: although it's probably a good idea to enable this option, the default value
+# is currently set to off for legacy reasons.
+# Default: no
+#SupportMultipleRecipients yes
+
diff --git a/recipes-security/clamav/clamav-0.98.5/clamav.service b/recipes-security/clamav/clamav-0.98.5/clamav.service
new file mode 100644
index 0000000..f13191f
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/clamav.service
@@ -0,0 +1,17 @@
+[Unit]
+Description=Clam AntiVirus userspace daemon
+Documentation=man:clamd(8) man:clamd.conf(5) http://www.clamav.net/lang/en/doc/
+Requires=clamav-daemon.socket
+# Check for database existence
+ConditionPathExistsGlob=/usr/share/clamav/main.{c[vl]d,inc}
+ConditionPathExistsGlob=/usr/share/clamav/daily.{c[vl]d,inc}
+
+[Service]
+ExecStart=/usr/sbin/clamd --foreground=true
+# Reload the database
+ExecReload=/bin/kill -USR2 $MAINPID
+StandardOutput=syslog
+
+[Install]
+WantedBy=multi-user.target
+Also=clamav-daemon.socket
diff --git a/recipes-security/clamav/clamav-0.98.5/clamd.conf b/recipes-security/clamav/clamav-0.98.5/clamd.conf
new file mode 100644
index 0000000..0457785
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/clamd.conf
@@ -0,0 +1,595 @@
+# Uncomment this option to enable logging.
+# LogFile must be writable for the user running daemon.
+# A full path is required.
+# Default: disabled
+LogFile /tmp/clamd.log
+
+# By default the log file is locked for writing - the lock protects against
+# running clamd multiple times (if want to run another clamd, please
+# copy the configuration file, change the LogFile variable, and run
+# the daemon with --config-file option).
+# This option disables log file locking.
+# Default: no
+LogFileUnlock yes
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
+# rotation (the LogRotate option) will always be enabled.
+# Default: 1M
+LogFileMaxSize 2M
+
+# Log time with each message.
+# Default: no
+LogTime yes
+
+# Also log clean files. Useful in debugging but drastically increases the
+# log size.
+# Default: no
+#LogClean yes
+
+# Use system logger (can work together with LogFile).
+# Default: no
+#LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# Log additional information about the infected file, such as its
+# size and hash, together with the virus name.
+ExtendedDetectionInfo yes
+
+# This option allows you to save a process identifier of the listening
+# daemon (main thread).
+# Default: disabled
+PidFile /var/run/clamd.pid
+
+# Optional path to the global temporary directory.
+# Default: system specific (usually /tmp or /var/tmp).
+TemporaryDirectory /var/tmp
+
+# Path to the database directory.
+# Default: hardcoded (depends on installation options)
+DatabaseDirectory /var/lib/clamav
+
+# Only load the official signatures published by the ClamAV project.
+# Default: no
+#OfficialDatabaseOnly no
+
+# The daemon can work in local mode, network mode or both.
+# Due to security reasons we recommend the local mode.
+
+# Path to a local socket file the daemon will listen on.
+# Default: disabled (must be specified by a user)
+LocalSocket /tmp/clamd.socket
+
+# Sets the group ownership on the unix socket.
+# Default: disabled (the primary group of the user running clamd)
+#LocalSocketGroup virusgroup
+
+# Sets the permissions on the unix socket to the specified mode.
+# Default: disabled (socket is world accessible)
+#LocalSocketMode 660
+
+# Remove stale socket after unclean shutdown.
+# Default: yes
+#FixStaleSocket yes
+
+# TCP port address.
+# Default: no
+#TCPSocket 3310
+
+# TCP address.
+# By default we bind to INADDR_ANY, probably not wise.
+# Enable the following to provide some degree of protection
+# from the outside world. This option can be specified multiple
+# times if you want to listen on multiple IPs. IPv6 is now supported.
+# Default: no
+#TCPAddr 127.0.0.1
+
+# Maximum length the queue of pending connections may grow to.
+# Default: 200
+#MaxConnectionQueueLength 30
+
+# Clamd uses FTP-like protocol to receive data from remote clients.
+# If you are using clamav-milter to balance load between remote clamd daemons
+# on firewall servers you may need to tune the options below.
+
+# Close the connection when the data size limit is exceeded.
+# The value should match your MTA's limit for a maximum attachment size.
+# Default: 25M
+#StreamMaxLength 10M
+
+# Limit port range.
+# Default: 1024
+#StreamMinPort 30000
+# Default: 2048
+#StreamMaxPort 32000
+
+# Maximum number of threads running at the same time.
+# Default: 10
+#MaxThreads 20
+
+# Waiting for data from a client socket will timeout after this time (seconds).
+# Default: 120
+#ReadTimeout 300
+
+# This option specifies the time (in seconds) after which clamd should
+# timeout if a client doesn't provide any initial command after connecting.
+# Default: 5
+#CommandReadTimeout 5
+
+# This option specifies how long to wait (in miliseconds) if the send buffer is full.
+# Keep this value low to prevent clamd hanging
+#
+# Default: 500
+#SendBufTimeout 200
+
+# Maximum number of queued items (including those being processed by MaxThreads threads)
+# It is recommended to have this value at least twice MaxThreads if possible.
+# WARNING: you shouldn't increase this too much to avoid running out of file descriptors,
+# the following condition should hold:
+# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
+#
+# Default: 100
+#MaxQueue 200
+
+# Waiting for a new job will timeout after this time (seconds).
+# Default: 30
+#IdleTimeout 60
+
+# Don't scan files and directories matching regex
+# This directive can be used multiple times
+# Default: scan all
+#ExcludePath ^/proc/
+#ExcludePath ^/sys/
+
+# Maximum depth directories are scanned at.
+# Default: 15
+#MaxDirectoryRecursion 20
+
+# Follow directory symlinks.
+# Default: no
+#FollowDirectorySymlinks yes
+
+# Follow regular file symlinks.
+# Default: no
+#FollowFileSymlinks yes
+
+# Scan files and directories on other filesystems.
+# Default: yes
+#CrossFilesystems yes
+
+# Perform a database check.
+# Default: 600 (10 min)
+#SelfCheck 600
+
+# Execute a command when virus is found. In the command string %v will
+# be replaced with the virus name.
+# Default: no
+#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
+
+# Run as another user (clamd must be started by root for this option to work)
+# Default: don't drop privileges
+User clamav
+
+# Initialize supplementary group access (clamd must be started by root).
+# Default: no
+#AllowSupplementaryGroups no
+
+# Stop daemon when libclamav reports out of memory condition.
+#ExitOnOOM yes
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Do not remove temporary files (for debug purposes).
+# Default: no
+#LeaveTemporaryFiles yes
+
+# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
+# any ALLMATCHSCAN command as invalid.
+# Default: yes
+#AllowAllMatchScan no
+
+# Detect Possibly Unwanted Applications.
+# Default: no
+#DetectPUA yes
+
+# Exclude a specific PUA category. This directive can be used multiple times.
+# See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for
+# the complete list of PUA categories.
+# Default: Load all categories (if DetectPUA is activated)
+#ExcludePUA NetTool
+#ExcludePUA PWTool
+
+# Only include a specific PUA category. This directive can be used multiple
+# times.
+# Default: Load all categories (if DetectPUA is activated)
+#IncludePUA Spy
+#IncludePUA Scanner
+#IncludePUA RAT
+
+# In some cases (eg. complex malware, exploits in graphic files, and others),
+# ClamAV uses special algorithms to provide accurate detection. This option
+# controls the algorithmic detection.
+# Default: yes
+#AlgorithmicDetection yes
+
+# This option causes memory or nested map scans to dump the content to disk.
+# If you turn on this option, more data is written to disk and is available
+# when the LeaveTemporaryFiles option is enabled.
+#ForceToDisk yes
+
+# This option allows you to disable the caching feature of the engine. By
+# default, the engine will store an MD5 in a cache of any files that are
+# not flagged as virus or that hit limits checks. Disabling the cache will
+# have a negative performance impact on large scans.
+# Default: no
+#DisableCache yes
+
+##
+## Executable files
+##
+
+# PE stands for Portable Executable - it's an executable file format used
+# in all 32 and 64-bit versions of Windows operating systems. This option allows
+# ClamAV to perform a deeper analysis of executable files and it's also
+# required for decompression of popular executable packers such as UPX, FSG,
+# and Petite. If you turn off this option, the original files will still be
+# scanned, but without additional processing.
+# Default: yes
+#ScanPE yes
+
+# Certain PE files contain an authenticode signature. By default, we check
+# the signature chain in the PE file against a database of trusted and
+# revoked certificates if the file being scanned is marked as a virus.
+# If any certificate in the chain validates against any trusted root, but
+# does not match any revoked certificate, the file is marked as whitelisted.
+# If the file does match a revoked certificate, the file is marked as virus.
+# The following setting completely turns off authenticode verification.
+# Default: no
+#DisableCertCheck yes
+
+# Executable and Linking Format is a standard format for UN*X executables.
+# This option allows you to control the scanning of ELF files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+#ScanELF yes
+
+# With this option clamav will try to detect broken executables (both PE and
+# ELF) and mark them as Broken.Executable.
+# Default: no
+#DetectBrokenExecutables yes
+
+
+##
+## Documents
+##
+
+# This option enables scanning of OLE2 files, such as Microsoft Office
+# documents and .msi files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+#ScanOLE2 yes
+
+# With this option enabled OLE2 files with VBA macros, which were not
+# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
+# Default: no
+#OLE2BlockMacros no
+
+# This option enables scanning within PDF files.
+# If you turn off this option, the original files will still be scanned, but
+# without decoding and additional processing.
+# Default: yes
+#ScanPDF yes
+
+# This option enables scanning within SWF files.
+# If you turn off this option, the original files will still be scanned, but
+# without decoding and additional processing.
+# Default: yes
+#ScanSWF yes
+
+
+##
+## Mail files
+##
+
+# Enable internal e-mail scanner.
+# If you turn off this option, the original files will still be scanned, but
+# without parsing individual messages/attachments.
+# Default: yes
+#ScanMail yes
+
+# Scan RFC1341 messages split over many emails.
+# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
+# WARNING: This option may open your system to a DoS attack.
+# Never use it on loaded servers.
+# Default: no
+#ScanPartialMessages yes
+
+# With this option enabled ClamAV will try to detect phishing attempts by using
+# signatures.
+# Default: yes
+#PhishingSignatures yes
+
+# Scan URLs found in mails for phishing attempts using heuristics.
+# Default: yes
+#PhishingScanURLs yes
+
+# Always block SSL mismatches in URLs, even if the URL isn't in the database.
+# This can lead to false positives.
+#
+# Default: no
+#PhishingAlwaysBlockSSLMismatch no
+
+# Always block cloaked URLs, even if URL isn't in database.
+# This can lead to false positives.
+#
+# Default: no
+#PhishingAlwaysBlockCloak no
+
+# Detect partition intersections in raw disk images using heuristics.
+# Default: no
+#PartitionIntersection no
+
+# Allow heuristic match to take precedence.
+# When enabled, if a heuristic scan (such as phishingScan) detects
+# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
+# scan-time.
+# When disabled, virus/phish detected by heuristic scans will be reported only at
+# the end of a scan. If an archive contains both a heuristically detected
+# virus/phish, and a real malware, the real malware will be reported
+#
+# Keep this disabled if you intend to handle "*.Heuristics.*" viruses
+# differently from "real" malware.
+# If a non-heuristically-detected virus (signature-based) is found first,
+# the scan is interrupted immediately, regardless of this config option.
+#
+# Default: no
+#HeuristicScanPrecedence yes
+
+
+##
+## Data Loss Prevention (DLP)
+##
+
+# Enable the DLP module
+# Default: No
+#StructuredDataDetection yes
+
+# This option sets the lowest number of Credit Card numbers found in a file
+# to generate a detect.
+# Default: 3
+#StructuredMinCreditCardCount 5
+
+# This option sets the lowest number of Social Security Numbers found
+# in a file to generate a detect.
+# Default: 3
+#StructuredMinSSNCount 5
+
+# With this option enabled the DLP module will search for valid
+# SSNs formatted as xxx-yy-zzzz
+# Default: yes
+#StructuredSSNFormatNormal yes
+
+# With this option enabled the DLP module will search for valid
+# SSNs formatted as xxxyyzzzz
+# Default: no
+#StructuredSSNFormatStripped yes
+
+
+##
+## HTML
+##
+
+# Perform HTML normalisation and decryption of MS Script Encoder code.
+# Default: yes
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+#ScanHTML yes
+
+
+##
+## Archives
+##
+
+# ClamAV can scan within archives and compressed files.
+# If you turn off this option, the original files will still be scanned, but
+# without unpacking and additional processing.
+# Default: yes
+#ScanArchive yes
+
+# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
+# Default: no
+#ArchiveBlockEncrypted no
+
+
+##
+## Limits
+##
+
+# The options below protect your system against Denial of Service attacks
+# using archive bombs.
+
+# This option sets the maximum amount of data to be scanned for each input file.
+# Archives and other containers are recursively extracted and scanned up to this
+# value.
+# Value of 0 disables the limit
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 100M
+#MaxScanSize 150M
+
+# Files larger than this limit won't be scanned. Affects the input file itself
+# as well as files contained inside it (when the input file is an archive, a
+# document or some other kind of container).
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 25M
+#MaxFileSize 30M
+
+# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
+# file, all files within it will also be scanned. This options specifies how
+# deeply the process should be continued.
+# Note: setting this limit too high may result in severe damage to the system.
+# Default: 16
+#MaxRecursion 10
+
+# Number of files to be scanned within an archive, a document, or any other
+# container file.
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10000
+#MaxFiles 15000
+
+# Maximum size of a file to check for embedded PE. Files larger than this value
+# will skip the additional analysis step.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10M
+#MaxEmbeddedPE 10M
+
+# Maximum size of a HTML file to normalize. HTML files larger than this value
+# will not be normalized or scanned.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10M
+#MaxHTMLNormalize 10M
+
+# Maximum size of a normalized HTML file to scan. HTML files larger than this
+# value after normalization will not be scanned.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 2M
+#MaxHTMLNoTags 2M
+
+# Maximum size of a script file to normalize. Script content larger than this
+# value will not be normalized or scanned.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 5M
+#MaxScriptNormalize 5M
+
+# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
+# than this value will skip the step to potentially reanalyze as PE.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 1M
+#MaxZipTypeRcg 1M
+
+# This option sets the maximum number of partitions of a raw disk image to be scanned.
+# Raw disk images with more partitions than this value will have up to the value number
+# partitions scanned. Negative values are not allowed.
+# Note: setting this limit too high may result in severe damage or impact performance.
+# Default: 50
+#MaxPartitions 128
+
+# This option sets the maximum number of icons within a PE to be scanned.
+# PE files with more icons than this value will have up to the value number icons scanned.
+# Negative values are not allowed.
+# WARNING: setting this limit too high may result in severe damage or impact performance.
+# Default: 100
+#MaxIconsPE 200
+
+##
+## On-access Scan Settings
+##
+
+# Enable on-access scanning. Currently, this is supported via fanotify.
+# Clamuko/Dazuko support has been deprecated.
+# Default: no
+#ScanOnAccess yes
+
+# Don't scan files larger than OnAccessMaxFileSize
+# Value of 0 disables the limit.
+# Default: 5M
+#OnAccessMaxFileSize 10M
+
+# Set the include paths (all files inside them will be scanned). You can have
+# multiple OnAccessIncludePath directives but each directory must be added
+# in a separate line. (On-access scan only)
+# Default: disabled
+#OnAccessIncludePath /home
+#OnAccessIncludePath /students
+
+# Set the exclude paths. All subdirectories are also excluded.
+# (On-access scan only)
+# Default: disabled
+#OnAccessExcludePath /home/bofh
+
+# With this option you can whitelist specific UIDs. Processes with these UIDs
+# will be able to access all files.
+# This option can be used multiple times (one per line).
+# Default: disabled
+#OnAccessExcludeUID 0
+
+
+##
+## Bytecode
+##
+
+# With this option enabled ClamAV will load bytecode from the database.
+# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
+# Default: yes
+#Bytecode yes
+
+# Set bytecode security level.
+# Possible values:
+# None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
+# This value is only available if clamav was built with --enable-debug!
+# TrustSigned - trust bytecode loaded from signed .c[lv]d files,
+# insert runtime safety checks for bytecode loaded from other sources
+# Paranoid - don't trust any bytecode, insert runtime checks for all
+# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
+# Note that by default only signed bytecode is loaded, currently you can only
+# load unsigned bytecode in --enable-debug mode.
+#
+# Default: TrustSigned
+#BytecodeSecurity TrustSigned
+
+# Set bytecode timeout in miliseconds.
+#
+# Default: 5000
+# BytecodeTimeout 1000
+
+##
+## Statistics gathering and submitting
+##
+
+# Enable statistical reporting.
+# Default: no
+#StatsEnabled yes
+
+# Disable submission of individual PE sections for files flagged as malware.
+# Default: no
+#StatsPEDisabled yes
+
+# HostID in the form of an UUID to use when submitting statistical information.
+# Default: auto
+#StatsHostID auto
+
+# Time in seconds to wait for the stats server to come back with a response
+# Default: 10
+#StatsTimeout 10
diff --git a/recipes-security/clamav/clamav-0.98.5/freshclam.conf b/recipes-security/clamav/clamav-0.98.5/freshclam.conf
new file mode 100644
index 0000000..100724f
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/freshclam.conf
@@ -0,0 +1,224 @@
+# Path to the database directory.
+# WARNING: It must match clamd.conf's directive!
+# Default: hardcoded (depends on installation options)
+DatabaseDirectory /var/lib/clamav
+
+# Path to the log file (make sure it has proper permissions)
+# Default: disabled
+UpdateLogFile /var/log/clamav/freshclam.log
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled,
+# log rotation (the LogRotate option) will always be enabled.
+# Default: 1M
+LogFileMaxSize 2M
+
+# Log time with each message.
+# Default: no
+LogTime yes
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Use system logger (can work together with UpdateLogFile).
+# Default: no
+#LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# This option allows you to save the process identifier of the daemon
+# Default: disabled
+PidFile /var/run/freshclam.pid
+
+# By default when started freshclam drops privileges and switches to the
+# "clamav" user. This directive allows you to change the database owner.
+# Default: clamav (may depend on installation options)
+DatabaseOwner clamav
+
+# Initialize supplementary group access (freshclam must be started by root).
+# Default: no
+#AllowSupplementaryGroups yes
+
+# Use DNS to verify virus database version. Freshclam uses DNS TXT records
+# to verify database and software versions. With this directive you can change
+# the database verification domain.
+# WARNING: Do not touch it unless you're configuring freshclam to use your
+# own database verification domain.
+# Default: current.cvd.clamav.net
+#DNSDatabaseInfo current.cvd.clamav.net
+
+# Uncomment the following line and replace XY with your country
+# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
+# You can use db.XY.ipv6.clamav.net for IPv6 connections.
+#DatabaseMirror db.XY.clamav.net
+
+# database.clamav.net is a round-robin record which points to our most
+# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
+# not working. DO NOT TOUCH the following line unless you know what you
+# are doing.
+DatabaseMirror database.clamav.net
+
+# How many attempts to make before giving up.
+# Default: 3 (per mirror)
+#MaxAttempts 5
+
+# With this option you can control scripted updates. It's highly recommended
+# to keep it enabled.
+# Default: yes
+#ScriptedUpdates yes
+
+# By default freshclam will keep the local databases (.cld) uncompressed to
+# make their handling faster. With this option you can enable the compression;
+# the change will take effect with the next database update.
+# Default: no
+#CompressLocalDatabase no
+
+# With this option you can provide custom sources (http:// or file://) for
+# database files. This option can be used multiple times.
+# Default: no custom URLs
+#DatabaseCustomURL http://myserver.com/mysigs.ndb
+#DatabaseCustomURL file:///mnt/nfs/local.hdb
+
+# This option allows you to easily point freshclam to private mirrors.
+# If PrivateMirror is set, freshclam does not attempt to use DNS
+# to determine whether its databases are out-of-date, instead it will
+# use the If-Modified-Since request or directly check the headers of the
+# remote database files. For each database, freshclam first attempts
+# to download the CLD file. If that fails, it tries to download the
+# CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
+# and ScriptedUpdates. It can be used multiple times to provide
+# fall-back mirrors.
+# Default: disabled
+#PrivateMirror mirror1.mynetwork.com
+#PrivateMirror mirror2.mynetwork.com
+
+# Number of database checks per day.
+# Default: 12 (every two hours)
+#Checks 24
+
+# Proxy settings
+# Default: disabled
+#HTTPProxyServer myproxy.com
+#HTTPProxyPort 1234
+#HTTPProxyUsername myusername
+#HTTPProxyPassword mypass
+
+# If your servers are behind a firewall/proxy which applies User-Agent
+# filtering you can use this option to force the use of a different
+# User-Agent header.
+# Default: clamav/version_number
+#HTTPUserAgent SomeUserAgentIdString
+
+# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
+# multi-homed systems.
+# Default: Use OS'es default outgoing IP address.
+#LocalIPAddress aaa.bbb.ccc.ddd
+
+# Send the RELOAD command to clamd.
+# Default: no
+#NotifyClamd /path/to/clamd.conf
+
+# Run command after successful database update.
+# Default: disabled
+#OnUpdateExecute command
+
+# Run command when database update process fails.
+# Default: disabled
+#OnErrorExecute command
+
+# Run command when freshclam reports outdated version.
+# In the command string %v will be replaced by the new version number.
+# Default: disabled
+#OnOutdatedExecute command
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Timeout in seconds when connecting to database server.
+# Default: 30
+#ConnectTimeout 60
+
+# Timeout in seconds when reading from database server.
+# Default: 30
+#ReceiveTimeout 60
+
+# With this option enabled, freshclam will attempt to load new
+# databases into memory to make sure they are properly handled
+# by libclamav before replacing the old ones.
+# Default: yes
+#TestDatabases yes
+
+# When enabled freshclam will submit statistics to the ClamAV Project about
+# the latest virus detections in your environment. The ClamAV maintainers
+# will then use this data to determine what types of malware are the most
+# detected in the field and in what geographic area they are.
+# Freshclam will connect to clamd in order to get recent statistics.
+# Default: no
+#SubmitDetectionStats /path/to/clamd.conf
+
+# Country of origin of malware/detection statistics (for statistical
+# purposes only). The statistics collector at ClamAV.net will look up
+# your IP address to determine the geographical origin of the malware
+# reported by your installation. If this installation is mainly used to
+# scan data which comes from a different location, please enable this
+# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
+# of the country of origin.
+# Default: disabled
+#DetectionStatsCountry country-code
+
+# This option enables support for our "Personal Statistics" service.
+# When this option is enabled, the information on malware detected by
+# your clamd installation is made available to you through our website.
+# To get your HostID, log on http://www.stats.clamav.net and add a new
+# host to your host list. Once you have the HostID, uncomment this option
+# and paste the HostID here. As soon as your freshclam starts submitting
+# information to our stats collecting service, you will be able to view
+# the statistics of this clamd installation by logging into
+# http://www.stats.clamav.net with the same credentials you used to
+# generate the HostID. For more information refer to:
+# http://www.clamav.net/documentation.html#cctts
+# This feature requires SubmitDetectionStats to be enabled.
+# Default: disabled
+#DetectionStatsHostID unique-id
+
+# This option enables support for Google Safe Browsing. When activated for
+# the first time, freshclam will download a new database file (safebrowsing.cvd)
+# which will be automatically loaded by clamd and clamscan during the next
+# reload, provided that the heuristic phishing detection is turned on. This
+# database includes information about websites that may be phishing sites or
+# possible sources of malware. When using this option, it's mandatory to run
+# freshclam at least every 30 minutes.
+# Freshclam uses the ClamAV's mirror infrastructure to distribute the
+# database and its updates but all the contents are provided under Google's
+# terms of use. See http://www.google.com/transparencyreport/safebrowsing
+# and http://www.clamav.net/documentation.html#safebrowsing
+# for more information.
+# Default: disabled
+#SafeBrowsing yes
+
+# This option enables downloading of bytecode.cvd, which includes additional
+# detection mechanisms and improvements to the ClamAV engine.
+# Default: enabled
+#Bytecode yes
+
+# Download an additional 3rd party signature database distributed through
+# the ClamAV mirrors.
+# This option can be used multiple times.
+#ExtraDatabase dbname1
+#ExtraDatabase dbname2
diff --git a/recipes-security/clamav/clamav-0.98.5/series b/recipes-security/clamav/clamav-0.98.5/series
new file mode 100644
index 0000000..3b09681
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/series
@@ -0,0 +1,18 @@
+0001-Change-paths-in-sample-conf-file-to-match-Debian.patch
+0002-Add-an-additional-n-after-the-number-in-the-pidfile.patch
+0003-unit_tests-increment-test-timeout-from-40secs-to-5mi.patch
+0004-Fix-compiling-on-Hurd.patch
+0005-Workaround-a-bug-in-libc-on-Hurd.patch
+0006-remove-unnecessary-harmful-flags-from-libclamav.pc.patch
+0007-libclamav-use-libmspack.patch
+0008-Add-upstream-systemd-support-for-clamav-daemon-and-c.patch
+0009-fix-ssize_t-size_t-off_t-printf-modifier.patch
+0010-hardcode-LLVM-linker-flag-because-llvm-config-return.patch
+0011-Add-libmspack-library-from-upstream-without-unnecess.patch
+0012-allow-to-use-internal-libmspack-if-the-external-is-n.patch
+0013-fix-autoreconf-with-embedded-libmspack.patch
+0014-remove-AC_CONFIG_SRCDIR-llvm-configure-from-libclama.patch
+0015-bb-10731-Allow-to-specificy-a-group-for-the-socket-o.patch
+0016-clamav-milter-add-additinal-SMFIF_-flags-before-invo.patch
+0017-Bump-.so-version-number.patch
+0018-llvm-don-t-use-system-libs.patch
diff --git a/recipes-security/clamav/clamav-0.98.5/volatiles.03_clamav b/recipes-security/clamav/clamav-0.98.5/volatiles.03_clamav
new file mode 100644
index 0000000..ee2153c
--- /dev/null
+++ b/recipes-security/clamav/clamav-0.98.5/volatiles.03_clamav
@@ -0,0 +1,3 @@
+# <type> <owner> <group> <mode> <path> <linksource>
+d clamav clamav 0755 /var/log/clamav none
+f clamav clamav 0655 /var/log/clamav/freshclam.log none
diff --git a/recipes-security/clamav/clamav_0.98.5.bb b/recipes-security/clamav/clamav_0.98.5.bb
new file mode 100644
index 0000000..73c9ab2
--- /dev/null
+++ b/recipes-security/clamav/clamav_0.98.5.bb
@@ -0,0 +1,135 @@
+SUMMARY = "ClamAV anti-virus utility for Unix - command-line interface"
+DESCRIPTION = "ClamAV is an open source antivirus engine for detecting trojans, viruses, malware & other malicious threats."
+HOMEPAGE = "http://www.clamav.net/index.html"
+SECTION = "security"
+LICENSE = "LGPL-2.1"
+DEPENDS = "libtool db openssl zlib ncurses bzip2"
+
+LIC_FILES_CHKSUM = "file://COPYING.LGPL;beginline=2;endline=3;md5=4b89c05acc71195e9a06edfa2fa7d092"
+
+SRC_URI = "${DEBIAN_MIRROR}/main/c/${BPN}/${BPN}_${PV}+dfsg.orig.tar.xz;name=archive \
+ file://0001-Change-paths-in-sample-conf-file-to-match-Debian.patch \
+ file://0002-Add-an-additional-n-after-the-number-in-the-pidfile.patch \
+ file://0003-unit_tests-increment-test-timeout-from-40secs-to-5mi.patch \
+ file://0004-Fix-compiling-on-Hurd.patch \
+ file://0005-Workaround-a-bug-in-libc-on-Hurd.patch \
+ file://0006-remove-unnecessary-harmful-flags-from-libclamav.pc.patch \
+ file://0007-libclamav-use-libmspack.patch \
+ file://0008-Add-upstream-systemd-support-for-clamav-daemon-and-c.patch \
+ file://0009-fix-ssize_t-size_t-off_t-printf-modifier.patch \
+ file://0010-hardcode-LLVM-linker-flag-because-llvm-config-return.patch \
+ file://0011-Add-libmspack-library-from-upstream-without-unnecess.patch \
+ file://0012-allow-to-use-internal-libmspack-if-the-external-is-n.patch \
+ file://0013-fix-autoreconf-with-embedded-libmspack.patch \
+ file://0014-remove-AC_CONFIG_SRCDIR-llvm-configure-from-libclama.patch \
+ file://0015-bb-10731-Allow-to-specificy-a-group-for-the-socket-o.patch \
+ file://0016-clamav-milter-add-additinal-SMFIF_-flags-before-invo.patch \
+ file://0017-Bump-.so-version-number.patch \
+ file://0018-llvm-don-t-use-system-libs.patch \
+ file://clamav-0001-clamdscan.patch \
+ file://clamd.conf \
+ file://freshclam.conf \
+ file://volatiles.03_clamav \
+"
+
+SRC_URI[archive.md5sum] = "34d5e8698e57ce45c4a8c3c2cb211cf3"
+SRC_URI[archive.sha256sum] = "0e353f646a0add17ca42e75ccfc7edf4f8b7c1acc972a86c317543f6b365db2d"
+
+inherit autotools-brokensep pkgconfig useradd
+
+S = "${WORKDIR}/${BPN}-${PV}+dfsg"
+
+PACKAGECONFIG ??= ""
+PACKAGECONFIG += " ${@bb.utils.contains("DISTRO_FEATURES", "ipv6", "ipv6", "", d)}"
+PACKAGECONFIG[xml] = "--with-xml=${STAGING_LIBDIR}/.., --with-xml=no, libxml2,"
+PACKAGECONFIG[json] = "--with-libjson=${STAGING_LIBDIR}, --without-libjson, json,"
+PACKAGECONFIG[curl] = "--with-libcurl=${STAGING_LIBDIR}, --without-libcurl, curl,"
+PACKAGECONFIG[ipv6] = "--enable-ipv6, --disable-ipv6"
+
+UID = "clamav"
+GID = "clamav"
+
+EXTRA_OECONF += " --with-user=${UID} --with-group=${GID} \
+ --without-libcheck-prefix \
+ --disable-unrar \
+ --disable-llvm \
+ --with-openssl=${STAGING_LIBDIR}/.. \
+ --with-zlib=${STAGING_LIBDIR}/.. \
+ --with-libbz2-prefix=${STAGING_DIR}${prefix} \
+ --with-libcurses-prefix=${STAGING_LIBDIR}/.. \
+"
+
+do_install_append () {
+ install -d ${D}/${sysconfdir}
+ install -d ${D}/${localstatedir}/lib/clamav
+ install -d ${D}${sysconfdir}/clamav ${D}${sysconfdir}/default/volatiles
+
+ install -m 644 ${WORKDIR}/clamd.conf ${D}/${sysconfdir}
+ install -m 644 ${WORKDIR}/freshclam.conf ${D}/${sysconfdir}
+ install -m 0644 ${WORKDIR}/volatiles.03_clamav ${D}${sysconfdir}/default/volatiles/volatiles.03_clamav
+}
+
+pkg_postinst_${PN} () {
+ if [ -z "$D" ] && [ -e /etc/init.d/populate-volatile.sh ] ; then
+ ${sysconfdir}/init.d/populate-volatile.sh update
+ fi
+ chown ${UID}:${GID} ${localstatedir}/lib/clamav
+}
+
+
+PACKAGES = "${PN} ${PN}-dev ${PN}-dbg ${PN}-daemon ${PN}-doc \
+ ${PN}-clamdscan ${PN}-freshclam ${PN}-libclamav6 ${PN}-staticdev"
+
+FILES_${PN} = "${bindir}/clambc ${bindir}/clamscan ${bibdir}/clamsubmit \
+ ${bindir}/sigtool ${mandir}/man1/clambc* ${mandir}/man1/clamscan* \
+ ${mandir}/man1/sigtool* ${mandir}/man1/clambsubmit* \
+ ${docdir}/clamav/* "
+
+FILES_${PN}-clamdscan = " ${bindir}/clamdscan \
+ ${docdir}/clamdscan/* \
+ ${mandir}/man1/clamdscan* \
+ "
+
+FILES_${PN}-daemon = "${bindir}/clamconf ${bindir}/clamdtop ${sbindir}/clamd \
+ ${mandir}/man1/clamconf* ${mandir}/man1/clamdtop* \
+ ${mandir}/man5/clamd* ${mandir}/man8/clamd* \
+ ${sysconfdir}/clamd.conf* \
+ ${systemd_unitdir}/system/clamav-daemon/* \
+ ${docdir}/clamav-daemon/* ${sysconfdir}/clamav-daemon \
+ ${sysconfdir}/logcheck/ignore.d.server/clamav-daemon "
+
+FILES_${PN}-freshclam = "${bindir}/freshclam \
+ ${sysconfdir}/freshclam.conf* \
+ ${sysconfdir}/clamav ${sysconfdir}/default/volatiles \
+ ${localstatedir}/lib/clamav \
+ ${docdir}/${PN}-freshclam ${mandir}/man1/freshclam.* \
+ ${mandir}/man5/freshclam.conf.*"
+
+FILES_${PN}-dev = " ${bindir}/clamav-config ${libdir}/*.la \
+ ${libdir}/pkgconfig/*.pc \
+ ${mandir}/man1/clamav-config.* \
+ ${includedir}/*.h ${docdir}/libclamav* "
+
+FILES_${PN}-staticdev = "${libdir}/*.a"
+
+FILES_${PN}-libclamav6 = "${libdir}/libclamav.so* ${libdir}/libmspack.so*\
+ ${docdir}/libclamav6/* "
+
+FILES_${PN}-doc = "${mandir}/man/* \
+ ${datadir}/man/* \
+ ${docdir}/* "
+
+INSANE_SKIP_${PN}-libclamav6 = "dev-so"
+
+USERADD_PACKAGES = "${PN}"
+GROUPADD_PARAM_${PN} = "--system ${UID}"
+USERADD_PARAM_${PN} = "--system -g ${GID} --home-dir \
+ ${localstatedir}/spool/${BPN} \
+ --no-create-home --shell /bin/false ${BPN}"
+
+RPROVIDES_${PN} += "${PN}-systemd"
+RREPLACES_${PN} += "${PN}-systemd"
+RCONFLICTS_${PN} += "${PN}-systemd"
+SYSTEMD_SERVICE_${PN} = "${BPN}.service"
+
+RDEPENDS_${PN} += "openssl ncurses-libncurses libbz2 ncurses-libtinfo clamav-freshclam clamav-libclamav6"
--
1.9.1
More information about the yocto
mailing list