[yocto] meta-qt5 problem in yocto 1.7

[Simon Bolek]

Thanks!
As for the examples. I cannot help directly, but i would read
log.do_configure etc. files for details. You might find the reason there.
Although I have to say, that my knowledge in yocto is at the beginners
stadium at the moment ;-)

cheers
simon :-)

On Sun, Feb 1, 2015 at 6:10 PM, Alex J Lennon <ajlennon at dynamicdevices.co.uk
> wrote:

>
> On 31/01/2015 19:10, peterengcomau001 at adam.com.au wrote:
> >
> > Hi Alex,
> >
> > Thanks for confirming the problem exists.
> > I set QT_MODULE_BRANCH ?= "dev" in
> > meta-qt5/recipes-qt/qt5/qt5-git.inc, but still get the same problem.
> > Do I have the correct file ?
>
> Lachlan,
>
> So I have been building for qemux86 with dizzy,
>
> Build Configuration:
> BB_VERSION        = "1.24.0"
> BUILD_SYS         = "x86_64-linux"
> NATIVELSBSTRING   = "Ubuntu-14.04"
> TARGET_SYS        = "i586-poky-linux"
> MACHINE           = "qemux86"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.7.1"
> TUNE_FEATURES     = "m32 i586"
> TARGET_FPU        = ""
> meta
> meta-yocto        = "dizzy:9fc095a439c36014c73b3a8f240afba09fe0e4d7"
> meta-oe
> meta-efl
> meta-webserver
> meta-networking   = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b"
> meta-mono         = "master:b73fc7c525cc0068b2ed84fc26b5d2d4d87c6c12"
> meta-gnome
> meta-efl          = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b"
> meta-browser.master = "master:14e4829d716db416f62403ddd0941ab97491d707"
> meta-ruby
> meta-python       = "dizzy:200f6cafc878d4c26871fc56d21ecc8eaa9aa61b"
> meta-qt5.dizzy    = "dizzy:8b0ffbd849203d07164ccfad2535bdb107eecd08"
>
> local.conf is here http://pastebin.com/0t2GFWhu
> bblayers.conf is here http://pastebin.com/CK6dF9f5
>
> Build command is
>
> bitbake -k core-image-minimal
>
> So this fails a few times building, which seems to be related to gcc
> issues, and I've seen on and off for some time.
>
> Afer a few restarts I get to the point where most of it is built and I have
>
> ERROR: Function failed: do_configure (log file is located at
>
> /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtwebkit-examples/5.3.2-r0/temp/log.do_configure.26328)
> ERROR: Logfile of failure stored in:
>
> /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtwebkit-examples/5.3.2-r0/temp/log.do_configure.26328
>
> ERROR: Task 842
> (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/
> qtwebkit-examples_5.3.2.bb,
> do_configure) failed with exit code '1'
> WARNING: Failed to fetch URL
> git://qt.gitorious.org/qt/qtsystems.git;branch=5.3, attempting MIRRORS
> if available
> ERROR: Fetcher failure: Unable to find revision
> aa651c73bf7bc57c1b6b1bfcfa9afe901884a102 in branch 5.3 even from upstream
> ERROR: Function failed: Fetcher failure for URL:
> 'git://qt.gitorious.org/qt/qtsystems.git;branch=5.3'. Unable to fetch
> URL from any source.
> ERROR: Logfile of failure stored in:
>
> /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtsystems/5.3.99+5.4.0-beta1+gitAUTOINC+aa651c73bf-r0/temp/log.do_fetch.26325
> ERROR: Task 756
> (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/
> qtsystems_git.bb,
> do_fetch) failed with exit code '1'
>
> ...
>
> Note from the above that qtbase has built ok without modifications to
> meta-qt5
>
> To double check the qtbase and also to get qtwebkit building I
>
> bitbake -f -c cleansstate qtbase
> bitbake qtbase
>
> This builds OK
>
> ...
>
> Then
>
> bitbake -k core-image-minimal
>
> Gives
>
> ERROR: Task 843
> (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/
> qtwebkit-examples_5.3.2.bb,
> do_compile) failed with exit code '1'
> WARNING: Failed to fetch URL
> git://qt.gitorious.org/qt/qtsystems.git;branch=5.3, attempting MIRRORS
> if available
> ERROR: Fetcher failure: Unable to find revision
> aa651c73bf7bc57c1b6b1bfcfa9afe901884a102 in branch 5.3 even from upstream
> ERROR: Function failed: Fetcher failure for URL:
> 'git://qt.gitorious.org/qt/qtsystems.git;branch=5.3'. Unable to fetch
> URL from any source.
> ERROR: Logfile of failure stored in:
>
> /data_drive/imx6/rootfs_builder/qemux86.dizzy/tmp/work/i586-poky-linux/qtsystems/5.3.99+5.4.0-beta1+gitAUTOINC+aa651c73bf-r0/temp/log.do_fetch.21451
> ERROR: Task 756
> (/data_drive/imx6/rootfs_builder/sources/meta-qt5.dizzy/recipes-qt/qt5/
> qtsystems_git.bb,
> do_fetch) failed with exit code '1'
>
> ...
>
> Changing the branch in qtsystems_git gets qtsystems building
>
> #QT_MODULE_BRANCH = "5.3"
> QT_MODULE_BRANCH = "dev"
>
> ...
>
> I then removed the qtwebkit examples from local.conf as there's some
> strange linker problem there
>
> #    qtwebkit-examples-examples \
>
> I then had to remove the qt examples packages as for some reason they
> aren't getting built at all
>
> # qtbase-examples \
>
> ...
>
> That gets me to the point I get a dizzy root filesystem built. Next I
> need to understand why I am not getting the examples packages built.
>
> Hope that helps somewhat.
>
> Cheers,
>
> Alex
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20150201/57e42c08/attachment.html>