[yocto] Fwd: Re: BeagleBone...bitbake -v core-image-sato stops

[kaffeesurrogat]

-------- Forwarded Message --------
Subject: 	Re: [yocto] BeagleBone...bitbake -v core-image-sato stops
Date: 	Mon, 28 Dec 2015 10:09:09 +0100
From: 	Nico Mock <nico.mock at posteo.de>
To: 	yocto at yoctoproject.org



On 28.12.2015 09:58, kaffeesurrogat at posteo.de wrote:
> Sorry guys .....
>
> I thought I was done. Actually I'm not a bit smarter then before ;-)
>
> I'm still trying to build a yocto-image for a beaglebone. I believed,
> that the reason why yocto stopped compiling at attr-native-2.4.47-r0
> was the missing gcc-multilib support. I've tried the same build on a
> gentoo machine at work, which had a multilib environment, and it
> finished.
>
> I've setup a new gentoo with multilib environment on my laptop but
> ...... bitbake stops again at attr-native. So this was not the trick.
> The  log.do_compile in
>
> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/temp
>
>
> says nothing special, at least for me.  Here is the quote:
>
> -----------------------------------------------------------------------------------------------------
>
>
> x86_64-linux-libtool: link: gcc -o .libs/setfattr -Wl,-rpath-link
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath-link
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
> -Wl,-rpath
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
> -Wl,-O1 -Wl,-rpath-link
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath-link
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
> -Wl,-rpath
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
> -Wl,-O1 -Wl,-rpath-link
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath-link
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/lib
> -Wl,-rpath
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysroots/x86_64-linux/usr/lib
> -Wl,-rpath
> -Wl,/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/sysrootgmake[2]:
> Leaving directory
> '/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/setfattr'
>
> o fr.mo fr.po
>
> -------------------------------------------------------------------------------------------------------
>
>

ADD-ON:

I've had a look in the log.do-compile-file on my machine at work. It
says .....

-----------------------------------------------------------------------------------------------------------

o fr.mo fr.po
gmake[3]: Nothing to be done for 'default'.
gmake[3]: Leaving directory
'/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/x86_64-linux/attr-native/2.4.47-r0/attr-2.4.47/man/man1'
/usr/bin/gmake -C man2
gmake[2]: o: Command not found
../include/buildrules:66: recipe for target 'fr.mo' failed
gmake[2]: [fr.mo] Error 127 (ignored)

-----------------------------------------------------------------------------------------------------------

Well ..... ????????????????




> It will stay at this point forever.
>
>
> The last output messages of bitbake:
>
>
> --------------------------------------------------------------------------------------------------------
>
>
> + rm -rf
> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/sstate-build-populate_lic/
>
> + ret=0
> + trap '' 0
> + exit 0
>
> [INFO] Pre-processed cfg file beaglebone-standard-config-3.14.4 created.
> [INFO] processing of raw cfg data completed.
>
>
> ********************************************************************************
>
>   Configuration stored in
> /home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build/.config
> ********************************************************************************
>
>
>   To build with this kernel configuration, ensure a suitable toolchain
>   is in your path for arm, note its common command prefix, and do:
>
>    make
> O=/home/nico/yocto_bbb_daisy/poky/build_bbb/tmp/work/beaglebone-poky-linux-gnueabi/linux-yocto/3.14.4+gitAUTOINC+183622e809_0143c6ebb4-r0/linux-beaglebone-standard-build
> ARCH=arm \
>         CROSS_COMPILE=<cross-compile-prefix>
>
>
> + '[' 0 -ne 0 ']'
>
> + echo '# Global settings from linux recipe'
> + echo 'CONFIG_LOCALVERSION="-yocto-standard"'
> + ret=0
> + trap '' 0
> + exit 0
>
> Currently 1 running tasks (1040 of 1770):
> 0: attr-native-2.4.47-r0 do_compile (pid 1778)
>
> -------------------------------------------------------------------------------------------------
>
>
> To be honest, I'm lost ....
>
> Would be happy about some help,
>
> kaffeesurrogat
>
>
> On 07.12.2015 21:16, kaffeesurrogat at posteo.de wrote:
>> cd
>> /home/nico/yocto_bb/poky/build_bbb/tmp/work/cortexa8hf-vfp-neon-poky-linux-gnueabi/gcc-cross-initial/4.8.2-r0/gcc-4.8.2/build.i686-linux.arm-poky-linux-gnueabi
>