[yocto] [meta-raspberrypi][PATCH 2/2] python-sense-hat: Add recipe to support Raspberry Pi Sense HAT
Leon Anavi
leon at anavi.org
Sun Dec 20 14:19:31 PST 2015
On 2015-12-21 00:01, Khem Raj wrote:
> On Sun, Dec 20, 2015 at 2:00 PM, Leon Anavi <leon at anavi.org> wrote:
>> On 2015-12-20 23:43, Khem Raj wrote:
>>>
>>> On Sun, Dec 20, 2015 at 12:53 PM, Leon Anavi <leon at anavi.org> wrote:
>>>>
>>>> Python module to control the Raspberry Pi Sense HAT used in
>>>> the Astro Pi mission. This recipe provides the officially
>>>> supported library for the Sense HAT with access to all of the
>>>> on-board sensors and the LED matrix.
>>>>
>>>> Signed-off-by: Leon Anavi <leon at anavi.org>
>>>> ---
>>>> recipes-devtools/python/python-sense-hat_2.1.0.bb | 31
>>>> +++++++++++++++++++++++
>>>> 1 file changed, 31 insertions(+)
>>>> create mode 100644
>>>> recipes-devtools/python/python-sense-hat_2.1.0.bb
>>>>
>>>> diff --git a/recipes-devtools/python/python-sense-hat_2.1.0.bb
>>>> b/recipes-devtools/python/python-sense-hat_2.1.0.bb
>>>> new file mode 100644
>>>> index 0000000..0665536
>>>> --- /dev/null
>>>> +++ b/recipes-devtools/python/python-sense-hat_2.1.0.bb
>>>> @@ -0,0 +1,31 @@
>>>> +SUMMARY = "Python module to control the Raspberry Pi Sense HAT used
>>>> in
>>>> the Astro Pi mission"
>>>> +HOMEPAGE = "https://github.com/RPi-Distro/python-sense-hat"
>>>> +SECTION = "devel/python"
>>>> +LICENSE = "BSD"
>>>> +LIC_FILES_CHKSUM =
>>>> "file://LICENCE.txt;md5=d80fe312e1ff5fbd97369b093bf21cda"
>>>> +
>>>> +SRCNAME = "sense-hat"
>>>> +
>>>> +SRC_URI =
>>>> "https://pypi.python.org/packages/source/s/${SRCNAME}/${SRCNAME}-${PV}.tar.gz"
>>>> +
>>>> +SRC_URI[md5sum] = "71217f15ea963040f06e2f50722186ca"
>>>> +SRC_URI[sha256sum] =
>>>> "c6c76707c0ea514e4b0f1f96f1b5b79755875891aae037df7434b6aad7b9dbca"
>>>> +
>>>> +S = "${WORKDIR}/${SRCNAME}-${PV}"
>>>> +
>>>> +inherit setuptools
>>>> +
>>>> +DEPENDS_${PN} += " \
>>>
>>>
>>> Just use DEPENDS here and remove -dev entries below, its implied with
>>> DEPENDS
>>
>>
>> Done. I resubmitted this patch again. Thank you for the help.
>>
>
> Looks good now. Thx
It was my pleasure. Thanks again for the feedback.
Btw a quick and easy way to test the result on Raspberry Pi with a Sense
HAT:
wget
https://github.com/leon-anavi/python-sense-hat-scripts/archive/master.zip
unzip master.zip
cd python-sense-hat-scripts-master/
python python-sense-hat-text.py
If everything is OK you should see red text "Hello" scrolling on the LED
matrix of the Sense HAT.
Best regards,
Leon
>
>> Best regards, Leon
>>
>>
>>>
>>>> + jpeg \
>>>> + jpeg-dev \
>>>> + zlib \
>>>> + zlib-dev \
>>>> + freetype \
>>>> + freetype-dev \
>>>> + "
>>>> +
>>>> +RDEPENDS_${PN} += " \
>>>> + python-numpy \
>>>> + python-rtimu \
>>>> + python-imaging \
>>>> + "
>>>> --
>>>> 2.5.0
>>>>
>>>> --
>>>> _______________________________________________
>>>> yocto mailing list
>>>> yocto at yoctoproject.org
>>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>> --
>> http://anavi.org/
--
http://anavi.org/
More information about the yocto
mailing list