[yocto] samba tdb compile error！

[Neil.Wu at Emerson.com]

Hi all,
                I creat the recipes of the samba tdb, compile the x86 package is ok ,but it apper an error when I ‘m compiling  the arm package , like the following :

Build Configuration:
BB_VERSION        = "1.22.0"
BUILD_SYS         = "i686-linux"
NATIVELSBSTRING   = "Ubuntu-14.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "qemuarm"
DISTRO            = "poky"
DISTRO_VERSION    = "1.6.1"
TUNE_FEATURES     = "armv5 thumb dsp"
TARGET_FPU        = "soft"
meta
meta-yocto
meta-yocto-bsp
meta-G4           = "daisy:525ec71e2c8dde72499f4e4cc6766f6db9c83e90"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (log file is located at /home/etcrs/poky/build/tmp/work/armv5te-poky-linux-gnueabi/g4tdb/1.3.1-r0/temp/log.do_configure.20145)
ERROR: Logfile of failure stored in: /home/etcrs/poky/build/tmp/work/armv5te-poky-linux-gnueabi/g4tdb/1.3.1-r0/temp/log.do_configure.20145
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| Checking for program gcc or cc           : ['arm-poky-linux-gnueabi-gcc', '-march=armv5te', '-marm', '-mthumb-interwork', '--sysroot=/home/etcrs/poky/build/tmp/sysroots/qemuarm']
| Checking for program ar                  : arm-poky-linux-gnueabi-ar
| Checking for program ranlib              : arm-poky-linux-gnueabi-ranlib
| Checking for gcc                         : ok
| Checking for program git                 : /opt/poky/1.6.1/sysroots/i686-pokysdk-linux/usr/bin/git
| Check for -MD                            : yes
| Checking for program gdb                 : /usr/bin/gdb
| Checking build system                    : Linux SiteSupervisor 3.13.0-30-generic #54-Ubuntu SMP Mon Jun 9 22:47:59 UTC 2014 i686 i686 i686 GNU/Linux
| Checking for header sys/utsname.h        : yes
| Checking uname sysname type              : Traceback (most recent call last):
|   File "./buildtools/bin/waf", line 76, in <module>
|     Scripting.prepare(t, cwd, VERSION, wafdir)
|   File "/home/etcrs/poky/build/tmp/work/armv5te-poky-linux-gnueabi/g4tdb/1.3.1-r0/tdb-1.3.1/buildtools/wafadmin/Scripting.py", line 145, in prepare

If you know the solution, please help me!

Thank you&Best regards
Neil Wu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20141022/d8729f59/attachment.html>