[yocto] Sato image runs, but doesn't start its GUI

[Burton, Ross]

On 13 November 2014 13:10, Mike Looijmans <mike.looijmans at topic.nl> wrote:

> Next challenge is to calibrate the touch screen...
>

This is something that regressed, the calibrator doesn't get installed out
of the box properly.  Install xinput-calibrator in your image and it should
start on boot if required.

Ross
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20141113/b410a1cf/attachment.html>