[yocto] Building on target

[Rick Bianchi]

usbip from /usr/src/kernel/drivers/staging/usbip


On Wed, Mar 12, 2014 at 11:44 AM, Gary Thomas <gary at mlbassoc.com> wrote:

> On 2014-03-12 10:09, Rick Bianchi wrote:
> > I completely agree with regards to the comparison, but I have compiled
> the same exact source on the same target (arm) and it only took 5 minutes
> when running the Linaro image.
> >
> > To clarify, the only difference is the build, one is Linaro (took 5
> minutes to compile source on the target) and the other Yocto (took almost
> 24 hours to compile source on the target).
>
> Sorry, I missed that this was on the same hardware.
>
> What are you building?  I'm going to try and duplicate this here
> on hardware I have that's quite similar to your Gumstix board.
>
> >
> > Is there something that I am missing?
> >
> >
> > On Wed, Mar 12, 2014 at 8:28 AM, Gary Thomas <gary at mlbassoc.com <mailto:
> gary at mlbassoc.com>> wrote:
> >
> >     On 2014-03-12 09:15, Rick Bianchi wrote:
> >     >
> >     > I have the gumstix-console-image with the added packages below.
> When I compile on the target is take a very long time for it to complete,
> over 24 hours. I have compiled the same
> >     > code on the same target, but running Linaro image, and it only
> takes a few minutes. Is there another recipe that I need to add to the
> build to speed up compiling?
> >
> >     Doubtful.  The reason your build on the target takes so long is
> merely
> >     one of horsepower - that little ARM processor just doesn't have it,
> especially
> >     if you are comparing it to a typical desktop environment.
> >
> >     > EXTRA_IMAGE_FEATURES += "dev-pkgs"
> >     > IMAGE_INSTALL_append =" autoconf"
> >     > IMAGE_INSTALL_append =" autofs"
> >     > IMAGE_INSTALL_append =" automake"
> >     > IMAGE_INSTALL_append =" ccache"
> >     > IMAGE_INSTALL_append =" chkconfig"
> >     > IMAGE_INSTALL_append =" dbus-glib"
> >     > IMAGE_INSTALL_append =" gcc"
> >     > IMAGE_INSTALL_append =" glib-2.0"
> >     > IMAGE_INSTALL_append =" glib-networking"
> >     > IMAGE_INSTALL_append =" glibmm"
> >     > IMAGE_INSTALL_append =" packagegroup-core-buildessential"
> >     > IMAGE_INSTALL_append =" pciutils"
> >     > IMAGE_INSTALL_append =" pkgconfig"
> >     > IMAGE_INSTALL_append =" python-scons"
> >     > IMAGE_INSTALL_append =" systemd-compat-units"
> >     > IMAGE_INSTALL_append =" sysfsutils"
> >     > IMAGE_INSTALL_append =" tcp-wrappers"
> >     > IMAGE_INSTALL_append =" usbutils"
> >     > IMAGE_INSTALL_append =" util-macros"
> >     >
> >     >
> >
> >     --
> >     ------------------------------------------------------------
> >     Gary Thomas                 |  Consulting for the
> >     MLB Associates              |    Embedded world
> >     ------------------------------------------------------------
> >     --
> >     _______________________________________________
> >     yocto mailing list
> >     yocto at yoctoproject.org <mailto:yocto at yoctoproject.org>
> >     https://lists.yoctoproject.org/listinfo/yocto
> >
> >
> >
> >
>
> --
> ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> ------------------------------------------------------------
> --
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20140312/d234c896/attachment.html>