[yocto] SysVinit and psplash

[Kevin Evans]

David,

Thanks for that pointer.  I updated my u-boot ini file to pass the console=tty2 to the kernel command line and it took care of the problem.

-Kevin
________________________________
From: David Welch [djwelch666 at gmail.com]
Sent: Wednesday, March 12, 2014 4:39 AM
To: Kevin Evans
Cc: yocto at yoctoproject.org
Subject: Re: [yocto] SysVinit and psplash

I too found this to be a problem.  Setting console=tty2 made the messages come out on another console and not visible on the screen.


On Mon, Mar 10, 2014 at 4:19 PM, Kevin Evans <Kevin.Evans at rigaku.com<mailto:Kevin.Evans at rigaku.com>> wrote:
Hello all:

I am using yocto denzil release with an IGEPv2 (beagle board clone). It appears the init is ignoring my log level being set to quite and prints the run level 5 messages and they appear between the splash screen and xorg starting.  I am not sure of the best way to suppress the text being displayed here. So far I have used:

1. Set loglevel=quiet in kernel commnand line (this silences the logging before pslash but not after.
2. Set the USE_VT build variable to "0". this only disabled logins through the VT.

Not sure what to try now. Any help would be appreciated.

--
_______________________________________________
yocto mailing list
yocto at yoctoproject.org<mailto:yocto at yoctoproject.org>
https://lists.yoctoproject.org/listinfo/yocto


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20140312/8bca77be/attachment.html>