[yocto] problem with yocto behind http_proxy
Federico Vitali
fede.vitali at gmail.com
Thu Feb 20 01:55:21 PST 2014
Thank you again Laurentiu. I gave it a try, but unfortunately I get an error
message from socat telling that authentication is not supported with SOCKS4.
Reading the man page I saw that athentication is only supported with TCP.
2014-02-19 15:23 GMT+01:00 Laurentiu Palcu <laurentiu.palcu at intel.com>:
> On Wed, Feb 19, 2014 at 02:57:49PM +0100, Federico Vitali wrote:
> > I've alreay tried, it doesn't accept it ...
> Apparently, socat has support for authentication. Try this:
>
> #!/bin/bash
> # $1 = hostname, $2 = port
> PROXY=myproxy.example.com
> exec socat STDIO SOCKS4:$PROXY:$1:$2,proxyauth=user:pass
>
> Above is just an example. You'll probably have to adujust it, depending
> on your proxy type. See the manual for details.
>
> laurentiu
> >
> >
> > 2014-02-19 14:51 GMT+01:00 Laurentiu Palcu <laurentiu.palcu at intel.com>:
> >
> > On Wed, Feb 19, 2014 at 02:24:38PM +0100, Federico Vitali wrote:
> > > Thank you Laurentiu. Unfortunately my proxy requires
> authentication via
> > > username and password,
> > > but it seems to me that netcat doesn't support it. Or am I wrong?
> > Well, the BSD netcat (on my Ubuntu 12.04) appears to support it:
> >
> > From the man page:
> > -P proxy_username
> > Specifies a username to present to a proxy server
> that
> > requires authentication. If no username is
> specified
> > then authentication will not be attempted. Proxy
> > authentication is only supported for HTTP CONNECT
> > proxies at present.
> >
> > Though I don't know how you specify a password... perhaps
> -Puser:passwd?
> >
> > laurentiu
> > >
> > >
> > > 2014-02-19 13:56 GMT+01:00 Laurentiu Palcu <
> laurentiu.palcu at intel.com>:
> > >
> > > Hi Federico,
> > >
> > > You can find more info about setting up Yocto behind proxies
> here:
> > >
> > >
> https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
> > >
> > > For git, I recommend the 'nc' method. Works fine for me.
> > >
> > > laurentiu
> > >
> > > On Wed, Feb 19, 2014 at 12:12:58PM +0100, Federico Vitali
> wrote:
> > > > sorry I forgot to reply also to yocto at yoctoproject.org.
> This was
> > the
> > > reply
> > > >
> > > > thank you Marco,
> > > > I've tried but I'm still having problems:
> > > >
> > > > WARNING: Failed to fetch URL git://git.yoctoproject.org/
> > > yocto-kernel-tools.git,
> > > > attempting MIRRORS if available
> > > > WARNING: Failed to fetch URL git://git.yoctoproject.org/
> > > linux-yocto-3.10.git;
> > > > bareclone=1;branch=standard/base,meta;name=machine,meta,
> attempting
> > > MIRRORS if
> > > > available
> > > > ERROR: Fetcher failure: Fetch command failed with exit code
> 128,
> > output:
> > > > fatal: unable to connect to git.yoctoproject.org:
> > > > git.yoctoproject.org: Name or service not known
> > > >
> > > > I noticed that the url https://www.yoctoproject.org/sourcesis not
> > > working.
> > > > So I tried http://downloads.yoctoproject.org/sources/, but
> I get
> > this
> > > error:
> > > >
> > > > ERROR: Fetcher failure: Fetch command failed with exit code
> 128,
> > output:
> > > > fatal: unable to connect to git.yoctoproject.org:
> > > > git.yoctoproject.org: Name or service not known
> > > >
> > > >
> > > >
> > > > 2014-02-19 11:49 GMT+01:00 Marco <koansoftware at gmail.com>:
> > > >
> > > > Il 19/02/2014 11:44, Federico Vitali ha scritto:
> > > >
> > > > Hi,
> > > >
> > > > I have problems using yocto behind a firewall. The
> firewall
> > > blocks git,
> > > > so I've followed the instructions
> > > > given here:
> > > >
> > > > http://www.yoctoproject.org/docs/1.5.1/ref-manual/
> > ref-manual.html
> > > #
> > > >
> > >
> >
> how-does-the-yocto-project-obtain-source-code-and-will-it-work-behind-my-firewall-or-proxy-server
> > > >
> > > > i.e. adding the following lines to my local.conf:
> > > >
> > > > PREMIRRORS_prepend = "\
> > > > git://.*/.*
> http://www.yoctoproject.org/sources/ \n \
> > > > ftp://.*/.*
> http://www.yoctoproject.org/sources/ \n \
> > > > http://.*/.*
> http://www.yoctoproject.org/sources/ \n
> > \
> > > > https://.*/.*
> http://www.yoctoproject.org/sources/ \
> > n"
> > > >
> > > >
> > > > BB_FETCH_PREMIRRORONLY = "1"
> > > >
> > > >
> > > > but I still get the following errors:
> > > >
> > > > ERROR: Function failed: Network access disabled
> through
> > > BB_NO_NETWORK
> > > > (or set indirectly due to use of
> BB_FETCH_PREMIRRORONLY)
> > but
> > > access
> > > > requested with command git fetch -f --prune git://
> > > git.yoctoproject.org/
> > > > yocto-kernel-tools.git <
> http://git.yoctoproject.org/
> > > > yocto-kernel-tools.git> refs/*:refs/* (for url
> git://
> > > > git.yoctoproject.org/yocto-kernel-tools.git <http://
> > > > git.yoctoproject.org/yocto-kernel-tools.git>)
> > > >
> > > > ERROR: Logfile of failure stored in:
> /home/vitalife/yocto/
> > > > poky-dora-10.0.1/build/tmp/work/x86_64-linux/
> > kern-tools-native/
> > > > 0.2+gitAUTOINC+a42509b01c-r12/temp/log.do_fetch.4490
> > > >
> > > > It seems that bitbake is still trying to access the
> server
> > with
> > > git.
> > > >
> > > > Any suggestion?
> > > >
> > > > Thank you in advance
> > > >
> > > > Federico
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Remove
> > > > BB_FETCH_PREMIRRORONLY = "1"
> > > >
> > > >
> > > > --
> > > > Marco Cavallini | KOAN sas | Bergamo - Italia
> > > > embedded and real-time software engineering
> > > > Phone:+39-035-255.235 - Fax:+39-178-22.39.748
> > > > http://www.KoanSoftware.com
> > > > _______________________________________________
> > > > yocto mailing list
> > > > yocto at yoctoproject.org
> > > > https://lists.yoctoproject.org/listinfo/yocto
> > > >
> > > >
> > >
> > > > _______________________________________________
> > > > yocto mailing list
> > > > yocto at yoctoproject.org
> > > > https://lists.yoctoproject.org/listinfo/yocto
> > >
> > >
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20140220/a8d1a619/attachment.html>
More information about the yocto
mailing list