[yocto] problem with yocto behind http_proxy
Laurentiu Palcu
laurentiu.palcu at intel.com
Wed Feb 19 06:23:11 PST 2014
On Wed, Feb 19, 2014 at 02:57:49PM +0100, Federico Vitali wrote:
> I've alreay tried, it doesn't accept it ...
Apparently, socat has support for authentication. Try this:
#!/bin/bash
# $1 = hostname, $2 = port
PROXY=myproxy.example.com
exec socat STDIO SOCKS4:$PROXY:$1:$2,proxyauth=user:pass
Above is just an example. You'll probably have to adujust it, depending
on your proxy type. See the manual for details.
laurentiu
>
>
> 2014-02-19 14:51 GMT+01:00 Laurentiu Palcu <laurentiu.palcu at intel.com>:
>
> On Wed, Feb 19, 2014 at 02:24:38PM +0100, Federico Vitali wrote:
> > Thank you Laurentiu. Unfortunately my proxy requires authentication via
> > username and password,
> > but it seems to me that netcat doesn't support it. Or am I wrong?
> Well, the BSD netcat (on my Ubuntu 12.04) appears to support it:
>
> From the man page:
> -P proxy_username
> Specifies a username to present to a proxy server that
> requires authentication. If no username is specified
> then authentication will not be attempted. Proxy
> authentication is only supported for HTTP CONNECT
> proxies at present.
>
> Though I don't know how you specify a password... perhaps -Puser:passwd?
>
> laurentiu
> >
> >
> > 2014-02-19 13:56 GMT+01:00 Laurentiu Palcu <laurentiu.palcu at intel.com>:
> >
> > Hi Federico,
> >
> > You can find more info about setting up Yocto behind proxies here:
> >
> > https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy
> >
> > For git, I recommend the 'nc' method. Works fine for me.
> >
> > laurentiu
> >
> > On Wed, Feb 19, 2014 at 12:12:58PM +0100, Federico Vitali wrote:
> > > sorry I forgot to reply also to yocto at yoctoproject.org. This was
> the
> > reply
> > >
> > > thank you Marco,
> > > I've tried but I'm still having problems:
> > >
> > > WARNING: Failed to fetch URL git://git.yoctoproject.org/
> > yocto-kernel-tools.git,
> > > attempting MIRRORS if available
> > > WARNING: Failed to fetch URL git://git.yoctoproject.org/
> > linux-yocto-3.10.git;
> > > bareclone=1;branch=standard/base,meta;name=machine,meta, attempting
> > MIRRORS if
> > > available
> > > ERROR: Fetcher failure: Fetch command failed with exit code 128,
> output:
> > > fatal: unable to connect to git.yoctoproject.org:
> > > git.yoctoproject.org: Name or service not known
> > >
> > > I noticed that the url https://www.yoctoproject.org/sources is not
> > working.
> > > So I tried http://downloads.yoctoproject.org/sources/, but I get
> this
> > error:
> > >
> > > ERROR: Fetcher failure: Fetch command failed with exit code 128,
> output:
> > > fatal: unable to connect to git.yoctoproject.org:
> > > git.yoctoproject.org: Name or service not known
> > >
> > >
> > >
> > > 2014-02-19 11:49 GMT+01:00 Marco <koansoftware at gmail.com>:
> > >
> > > Il 19/02/2014 11:44, Federico Vitali ha scritto:
> > >
> > > Hi,
> > >
> > > I have problems using yocto behind a firewall. The firewall
> > blocks git,
> > > so I've followed the instructions
> > > given here:
> > >
> > > http://www.yoctoproject.org/docs/1.5.1/ref-manual/
> ref-manual.html
> > #
> > >
> >
> how-does-the-yocto-project-obtain-source-code-and-will-it-work-behind-my-firewall-or-proxy-server
> > >
> > > i.e. adding the following lines to my local.conf:
> > >
> > > PREMIRRORS_prepend = "\
> > > git://.*/.*http://www.yoctoproject.org/sources/ \n \
> > > ftp://.*/.*http://www.yoctoproject.org/sources/ \n \
> > > http://.*/.*http://www.yoctoproject.org/sources/ \n
> \
> > > https://.*/.*http://www.yoctoproject.org/sources/ \
> n"
> > >
> > >
> > > BB_FETCH_PREMIRRORONLY = "1"
> > >
> > >
> > > but I still get the following errors:
> > >
> > > ERROR: Function failed: Network access disabled through
> > BB_NO_NETWORK
> > > (or set indirectly due to use of BB_FETCH_PREMIRRORONLY)
> but
> > access
> > > requested with command git fetch -f --prune git://
> > git.yoctoproject.org/
> > > yocto-kernel-tools.git <http://git.yoctoproject.org/
> > > yocto-kernel-tools.git> refs/*:refs/* (for url git://
> > > git.yoctoproject.org/yocto-kernel-tools.git <http://
> > > git.yoctoproject.org/yocto-kernel-tools.git>)
> > >
> > > ERROR: Logfile of failure stored in: /home/vitalife/yocto/
> > > poky-dora-10.0.1/build/tmp/work/x86_64-linux/
> kern-tools-native/
> > > 0.2+gitAUTOINC+a42509b01c-r12/temp/log.do_fetch.4490
> > >
> > > It seems that bitbake is still trying to access the server
> with
> > git.
> > >
> > > Any suggestion?
> > >
> > > Thank you in advance
> > >
> > > Federico
> > >
> > >
> > >
> > >
> > >
> > > Remove
> > > BB_FETCH_PREMIRRORONLY = "1"
> > >
> > >
> > > --
> > > Marco Cavallini | KOAN sas | Bergamo - Italia
> > > embedded and real-time software engineering
> > > Phone:+39-035-255.235 - Fax:+39-178-22.39.748
> > > http://www.KoanSoftware.com
> > > _______________________________________________
> > > yocto mailing list
> > > yocto at yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/yocto
> > >
> > >
> >
> > > _______________________________________________
> > > yocto mailing list
> > > yocto at yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/yocto
> >
> >
> >
>
>
More information about the yocto
mailing list