[yocto] [meta-yocto-bsp][PATCH] beaglebone.conf: update KERNEL_IMAGETYPE to match u-boot

[Bruce Ashfield]

On 12/09/2014 10:44 AM, Maciej Borzecki wrote:
> U-boot 2014.07 in Poky expects a zImage kernel image, thus a build done with
> current machien config will not be directly useable. Update machine config to
> produce a zImage.

poky's README.hardware should be updated as well. When we wrote the 
instructions
(and tested on 3.14) the uImage worked, so that is what is referenced
in the instructions :)

Bruce

>
> Signed-off-by: Maciej Borzecki <maciej.borzecki at open-rnd.pl>
> Signed-off-by: Maciek Borzecki <maciek.borzecki at gmail.com>
> ---
>   meta-yocto-bsp/conf/machine/beaglebone.conf | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/meta-yocto-bsp/conf/machine/beaglebone.conf b/meta-yocto-bsp/conf/machine/beaglebone.conf
> index a316207..fb0189d 100644
> --- a/meta-yocto-bsp/conf/machine/beaglebone.conf
> +++ b/meta-yocto-bsp/conf/machine/beaglebone.conf
> @@ -24,7 +24,7 @@ SERIAL_CONSOLE = "115200 ttyO0"
>   PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
>   PREFERRED_VERSION_linux-yocto ?= "3.14%"
>
> -KERNEL_IMAGETYPE = "uImage"
> +KERNEL_IMAGETYPE = "zImage"
>   KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"
>   KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
>
>