[yocto] Using uboot to boot a large uimage
Khem Raj
raj.khem at gmail.com
Tue Aug 26 13:03:48 PDT 2014
On 14-08-26 18:41:22, Crast, Nicholas wrote:
> I am currently attempting to boot with an initramfs built into my uimage using uboot.
>
> However, I cannot get it to boot correctly. If I make the uimage totally bare-bones, and just use core-image-minimal-initramfs, then it hangs huring init at the waiting for devices... printout. Going and gutting the init script, I can get to single user mode and it looks like the filesystem is there.
>
> I want a more full system, so I included core-image-boot and core-image-basic. I figured this would initialize better. When I do this, my uImage jumps up to ~50MB. U-boot then hangs at "starting kernel..."
>
core-image-minimal should boot you into shell console. That should have
been enough
> I don't think that the uimage is clobbering the device tree, because the device tree is loaded at 0x100, and the uimage is loaded at 0x8000.
>
make sure that memory is not overlapping and is initiaized
More information about the yocto
mailing list