[yocto] [meta-yocto][PATCH 1/2] beaglebone.conf: configuration updates

[Bruce Ashfield]

On 14-04-10 11:27 AM, Stanacar, StefanX wrote:
>
>
>
> On Thu, 2014-04-10 at 14:14 +0000, Stanacar, StefanX wrote:
>>
>>
>> On Thu, 2014-04-10 at 13:36 +0000, Stanacar, StefanX wrote:
>>> Hi Denys,
>>>
>>> With this patch applied and the updated README I can boot a Beaglebone
>>> Black (rev A6) with a default yocto image/config (I've used
>>> core-image-sato-sdk FWIW). Everything seems fine, I ran a bunch of tests
>>> on the image, except for X - it doesn't start :(.
>>> I've built with fbdev and omapfb too.
>>>
>>> X log for fbdev:
>>> http://pastebin.com/sqNc35U0
>>>
>>> for omapfb:
>>> http://pastebin.com/fMkzMW8U
>>>
>>> Is there anything else that needs to changed/added? I could add a
>>> xorg.conf on the image too, but then it beats the point...
>>>
>>
>> What I was trying to say is that we are missing a .bbappend for
>> xserver-xf86-config that adds the right xorg.conf (either for fbdev or
>> omapfb). I'll try to come up with one.
>
>
> Okay ignore that it didn't helped, I think I know what's missing.. I
> need the latest SRCREV_meta for kernel.

Which I just sent (and which may have prompted your email), so try
the commits I just sent and see if it helps.

Bruce

>
> Cheers,
> Stefan
>
>
>> Cheers,
>> Stefan
>>
>>> Cheers,
>>> Stefan
>>>
>>>
>>> On Thu, 2014-04-10 at 04:02 -0400, Denys Dmytriyenko wrote:
>>>> From: Denys Dmytriyenko <denys at ti.com>
>>>>
>>>> * Use fbdev video driver for xserver-xorg
>>>> * Recommend installing device tree DTB files into rootfs /boot directory
>>>> * Switch back to uImage kernel format from zImage, as U-boot was not updated
>>>>    - default has changed to zImage in newer U-boot 2013.10+, but we use 2013.07
>>>> * Correct copy/paste typo in serial console
>>>>
>>>> Signed-off-by: Denys Dmytriyenko <denys at ti.com>
>>>> ---
>>>>   meta-yocto-bsp/conf/machine/beaglebone.conf | 10 +++++-----
>>>>   1 file changed, 5 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/meta-yocto-bsp/conf/machine/beaglebone.conf b/meta-yocto-bsp/conf/machine/beaglebone.conf
>>>> index f2ef0cf..4263715 100644
>>>> --- a/meta-yocto-bsp/conf/machine/beaglebone.conf
>>>> +++ b/meta-yocto-bsp/conf/machine/beaglebone.conf
>>>> @@ -6,11 +6,10 @@ PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg"
>>>>   XSERVER ?= "xserver-xorg \
>>>>              xf86-input-evdev \
>>>>              xf86-input-mouse \
>>>> -           xf86-video-omapfb \
>>>> +           xf86-video-fbdev \
>>>>              xf86-input-keyboard"
>>>>
>>>> -# Ship all kernel modules by default
>>>> -MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
>>>> +MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
>>>>
>>>>   EXTRA_IMAGEDEPENDS += "u-boot"
>>>>
>>>> @@ -20,13 +19,14 @@ include conf/machine/include/tune-cortexa8.inc
>>>>   IMAGE_FSTYPES += "tar.bz2 jffs2"
>>>>   EXTRA_IMAGECMD_jffs2 = "-lnp "
>>>>
>>>> -SERIAL_CONSOLE = "115200 ttyO2"
>>>> +SERIAL_CONSOLE = "115200 ttyO0"
>>>>
>>>>   PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
>>>>   PREFERRED_VERSION_linux-yocto ?= "3.14%"
>>>>
>>>> -KERNEL_IMAGETYPE = "zImage"
>>>> +KERNEL_IMAGETYPE = "uImage"
>>>>   KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb"
>>>> +KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
>>>>
>>>>   SPL_BINARY = "MLO"
>>>>   UBOOT_SUFFIX = "img"
>>>> --
>>>> 1.9.1
>>>>
>>>
>>
>