[yocto] Issues on booting cedartrail image

[Diego Sueiro]

2013/9/29 Diego Sueiro <diego.sueiro at gmail.com>

> 2013/9/28 Sean Liming <sean.liming at annabooks.com>
>
>> Do you have a serial connections between the D2550 system and your host
>> PC?****
>>
>> ** **
>>
>> There is an install for USB to HDD installation. The serial connection is
>> needed to see the console output selection. Modify either the grub.cfg or
>> syslinux.cfg and change the default to “install”****
>>
>> ** **
>>
>> Regards,****
>>
>> ** **
>>
>> Sean Liming****
>>
>> Owner****
>>
>> [image: ablogo color - 500] <http://www.annabooks.com/>****
>>
>> Tel: 714-970-7523 / Cell: 858-774-3176****
>>
>> **
>>
> Just a correction I'm using D2500 processor with NM10 Express Chip and
> this motherboard:
>
> http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-d2500hn.html
>
> I'm sorry about the wrong info sent before.
>
> Sean,
>
> Yes, the serial cable is connected between motherboard and the host PC. I
> can get syslinux output from serial console.
>
> Changing "boot" to "install" doesn't resolved the issue. I believe that is
> something wrong with rootfs since init claims about "udevd: not found".
> Here is my syslinux.cfg:
>
> # Automatically created by OE
> serial 0 115200
> ALLOWOPTIONS 1
> DEFAULT install
> TIMEOUT 10
> PROMPT 1
> LABEL boot
> KERNEL /vmlinuz
> APPEND initrd=/initrd LABEL=boot  root=/dev/ram0   console=ttyS0,115200
> console=tty0 video=LVDS-1:d video=VGA-1:e
> LABEL install
> KERNEL /vmlinuz
> APPEND initrd=/initrd LABEL=install  root=/dev/ram0   console=ttyS0,115200
> console=tty0 video=LVDS-1:d video=VGA-1:e
>
>
> Here is my grub.cfg:
>
> # Automatically created by OE
> serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
> default=install
> timeout=10
>
> menuentry 'boot'{
> linux /vmlinuz LABEL=boot root=/dev/ram0   console=ttyS0,115200
> console=tty0 video=LVDS-1:d video=VGA-1:e
> initrd /initrd
> }
>
> menuentry 'install'{
> linux /vmlinuz LABEL=install-efi root=/dev/ram0   console=ttyS0,115200
> console=tty0 video=LVDS-1:d video=VGA-1:e
> initrd /initrd
> }
>
>
>
> Using poky dylan branch and meta-ti-contrib with cdt-vesa machine I can
> boot a core-image-minimal and get logged in just on display. There is
> nothing on serial console after syslinux.
>
>
>
>
Folks,

Serial console issue solved. On this board the DB9 connector is mapped on
ttyS1.

But I can't still get logged on system with images generated with
meta-cedartrail on danny branch.

Any hint about udev reported error?

Regards,

--
*dS
Diego Sueiro

Administrador do Embarcados
www.embarcados.com.br

Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ

/*long live rock 'n roll*/



>
>
>> **
>>
>> *From:* yocto-bounces at yoctoproject.org [mailto:
>> yocto-bounces at yoctoproject.org] *On Behalf Of *Diego Sueiro
>> *Sent:* Saturday, September 28, 2013 4:40 PM
>> *To:* yocto at yoctoproject.org
>> *Subject:* [yocto] Issues on booting cedartrail image****
>>
>> ** **
>>
>> Folks,****
>>
>> ** **
>>
>> I'm having troubles to boot a cedartrail image. I tried both
>> core-image-minimal and core-image-cdv-media-cedartrail. I tried to boot
>> from USB drive and hard disk.****
>>
>> I'm using this hardware:
>> http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-d2550mud2.html
>> ****
>>
>> ** **
>>
>> I've followed the instructions from:****
>>
>>
>> http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/meta-cedartrail/README?h=danny
>> ****
>>
>>
>> https://wiki.yoctoproject.org/wiki/How_do_I#Q:_How_do_I_put_Yocto_on_a_hard_drive.3F
>> ****
>>
>> ** **
>>
>> For core-image-minimal****
>>
>> Syslinux console output:****
>>
>> SYSLINUX 4.03 2010-10-22  Copyright (C) 1994-2010 H. Peter Anvin et al***
>> *
>>
>> boot: ****
>>
>> Loading /vmlinuz.......****
>>
>> Loading /initrd.........ready.****
>>
>> ** **
>>
>> Syslinux display outuput (VGA):****
>>
>> SYSLINUX 4.03 2010-10-22  Copyright (C) 1994-2010 H. Peter Anvin et al***
>> *
>>
>> boot: ****
>>
>> Loading /vmlinuz.......****
>>
>> Loading /initrd.........ready.****
>>
>> ** **
>>
>> Decompressing Linux... Parsing ELF... done.****
>>
>> Booting the kernel.****
>>
>> ** **
>>
>> But I cannot see any kernel or system prints after that.****
>>
>> ** **
>>
>> For core-image-cdv-media****
>>
>> Syslinux console output:****
>>
>> SYSLINUX 4.03 2010-10-22  Copyright (C9 1994-2010 H. Peter Anvin et al***
>> *
>>
>> boot: ****
>>
>> Loading /vmlinuz.......****
>>
>> Load�ng /initrd.........ready.****
>>
>> ** **
>>
>> For syslinux display outuput (VGA) it prints kernel boot end the last 3
>> lines are:****
>>
>> Freeing unusued kernel memory: 500k freed****
>>
>> /init: line 69: udevd: not found****
>>
>> Waiting for removable media****
>>
>> ** **
>>
>> ** **
>>
>> With GRUB method (second link above) nothing appears on console and
>> display for both images.****
>>
>> ** **
>>
>> Here is my build environment:****
>>
>> Build Configuration:****
>>
>> BB_VERSION        = "1.16.0"****
>>
>> TARGET_ARCH       = "i586"****
>>
>> TARGET_OS         = "linux"****
>>
>> MACHINE           = "cedartrail"****
>>
>> DISTRO            = "poky"****
>>
>> DISTRO_VERSION    = "1.3.2"****
>>
>> TUNE_FEATURES     = "m32 core2"****
>>
>> TARGET_FPU        = ""****
>>
>> meta              ****
>>
>> meta-yocto        ****
>>
>> meta-yocto-bsp    = "danny:70ca9ff6422a03c26cfa78e76f6334bcf3fe47ec"****
>>
>> meta-intel        ****
>>
>> meta-cedartrail   = "danny:cc42fb6ec5900ad9f034014c3ddce04223908608"****
>>
>> meta-oe           = "danny:f00028caf257e386c0f3ae46bd4b3ba53dd0729d"****
>>
>> meta-videofone    = "danny:70ca9ff6422a03c26cfa78e76f6334bcf3fe47ec"****
>>
>> ** **
>>
>> Someone has some tips?****
>>
>> ** **
>>
>> Kind regards,****
>>
>> ** **
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> Administrador do Embarcados
>> www.embarcados.com.br
>>
>> Engenheiro de Controle e Automação
>> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>>
>> /*long live rock 'n roll*/****
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130929/137cfe65/attachment.html>