[yocto] Issues on booting cedartrail image

[Sean Liming]

Do you have a serial connections between the D2550 system and your host PC?

 

There is an install for USB to HDD installation. The serial connection is needed to see the console output selection. Modify either the grub.cfg or  syslinux.cfg and change the default to “install”

 

Regards,

 

Sean Liming

Owner

 <http://www.annabooks.com/> ablogo color - 500

Tel: 714-970-7523 / Cell: 858-774-3176

 

From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Diego Sueiro
Sent: Saturday, September 28, 2013 4:40 PM
To: yocto at yoctoproject.org
Subject: [yocto] Issues on booting cedartrail image

 

Folks,

 

I'm having troubles to boot a cedartrail image. I tried both core-image-minimal and core-image-cdv-media-cedartrail. I tried to boot from USB drive and hard disk.

I'm using this hardware: http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-d2550mud2.html

 

I've followed the instructions from:

http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/meta-cedartrail/README?h=danny

https://wiki.yoctoproject.org/wiki/How_do_I#Q:_How_do_I_put_Yocto_on_a_hard_drive.3F

 

For core-image-minimal

Syslinux console output:

SYSLINUX 4.03 2010-10-22  Copyright (C) 1994-2010 H. Peter Anvin et al

boot: 

Loading /vmlinuz.......

Loading /initrd.........ready.

 

Syslinux display outuput (VGA):

SYSLINUX 4.03 2010-10-22  Copyright (C) 1994-2010 H. Peter Anvin et al

boot: 

Loading /vmlinuz.......

Loading /initrd.........ready.

 

Decompressing Linux... Parsing ELF... done.

Booting the kernel.

 

But I cannot see any kernel or system prints after that.

 

For core-image-cdv-media

Syslinux console output:

SYSLINUX 4.03 2010-10-22  Copyright (C9 1994-2010 H. Peter Anvin et al

boot: 

Loading /vmlinuz.......

Load�ng /initrd.........ready.

 

For syslinux display outuput (VGA) it prints kernel boot end the last 3 lines are:

Freeing unusued kernel memory: 500k freed

/init: line 69: udevd: not found

Waiting for removable media

 

 

With GRUB method (second link above) nothing appears on console and display for both images.

 

Here is my build environment:

Build Configuration:

BB_VERSION        = "1.16.0"

TARGET_ARCH       = "i586"

TARGET_OS         = "linux"

MACHINE           = "cedartrail"

DISTRO            = "poky"

DISTRO_VERSION    = "1.3.2"

TUNE_FEATURES     = "m32 core2"

TARGET_FPU        = ""

meta              

meta-yocto        

meta-yocto-bsp    = "danny:70ca9ff6422a03c26cfa78e76f6334bcf3fe47ec"

meta-intel        

meta-cedartrail   = "danny:cc42fb6ec5900ad9f034014c3ddce04223908608"

meta-oe           = "danny:f00028caf257e386c0f3ae46bd4b3ba53dd0729d"

meta-videofone    = "danny:70ca9ff6422a03c26cfa78e76f6334bcf3fe47ec"

 

Someone has some tips?

 

Kind regards,

 

--
*dS
Diego Sueiro

Administrador do Embarcados
www.embarcados.com.br

Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ

/*long live rock 'n roll*/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130928/10bca0af/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 2409 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130928/10bca0af/attachment.jpg>