[yocto] [meta-baryon][PATCH 6/6] netperf: remove
Paul Eggleton
paul.eggleton at linux.intel.com
Fri Oct 4 16:09:19 PDT 2013
This isn't actually needed by baryon; it was only used in some of the
initial performance tests. If needed there is a well-maintained version
now in meta-networking.
Signed-off-by: Paul Eggleton <paul.eggleton at linux.intel.com>
---
.../netperf/netperf-2.4.4/cpu_set.patch | 32 --------------
recipes-connectivity/netperf/netperf-2.4.4/init | 51 ----------------------
.../netperf/netperf-2.4.4/vfork.patch | 35 ---------------
recipes-connectivity/netperf/netperf_2.4.4.bb | 46 -------------------
4 files changed, 164 deletions(-)
delete mode 100644 recipes-connectivity/netperf/netperf-2.4.4/cpu_set.patch
delete mode 100644 recipes-connectivity/netperf/netperf-2.4.4/init
delete mode 100755 recipes-connectivity/netperf/netperf-2.4.4/vfork.patch
delete mode 100644 recipes-connectivity/netperf/netperf_2.4.4.bb
diff --git a/recipes-connectivity/netperf/netperf-2.4.4/cpu_set.patch b/recipes-connectivity/netperf/netperf-2.4.4/cpu_set.patch
deleted file mode 100644
index 9f51c47..0000000
--- a/recipes-connectivity/netperf/netperf-2.4.4/cpu_set.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-Correctly define NETPERF_CPU_* macros
-
-Derived from OpenEmbedded project
-
-Signed-off-by: Dongxiao Xu <dongxiao.xu at intel.com>
-
-Upstream-Status: Pending
-
-Index: netperf-2.4.4/src/netlib.c
-===================================================================
---- netperf-2.4.4.orig/src/netlib.c 2007-10-17 23:16:02.000000000 +0200
-+++ netperf-2.4.4/src/netlib.c 2008-12-03 17:56:32.000000000 +0100
-@@ -1988,10 +1988,15 @@
- fall-back on what we had before, which is to use just the size of
- an unsigned long. raj 2006-09-14 */
-
--#if defined(__CPU_SETSIZE)
--#define NETPERF_CPU_SETSIZE __CPU_SETSIZE
--#define NETPERF_CPU_SET(cpu, cpusetp) __CPU_SET(cpu, cpusetp)
--#define NETPERF_CPU_ZERO(cpusetp) __CPU_ZERO (cpusetp)
-+#if defined(CPU_SETSIZE)
-+#define NETPERF_CPU_SETSIZE CPU_SETSIZE
-+#define NETPERF_CPU_SET(cpu, cpusetp) CPU_SET(cpu, cpusetp)
-+#define NETPERF_CPU_ZERO(cpusetp) CPU_ZERO (cpusetp)
-+ typedef cpu_set_t netperf_cpu_set_t;
-+#elif defined(__CPU_SETSIZE)
-+#define NETPERF_CPU_SETSIZE __CPU_SETSIZE
-+#define NETPERF_CPU_SET(cpu, cpusetp) __CPU_SET (cpu, cpusetp)
-+#define NETPERF_CPU_ZERO(cpusetp) __CPU_ZERO (cpusetp)
- typedef cpu_set_t netperf_cpu_set_t;
- #else
- #define NETPERF_CPU_SETSIZE sizeof(unsigned long)
diff --git a/recipes-connectivity/netperf/netperf-2.4.4/init b/recipes-connectivity/netperf/netperf-2.4.4/init
deleted file mode 100644
index 7cc053a..0000000
--- a/recipes-connectivity/netperf/netperf-2.4.4/init
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-#
-#
-# Written by Miquel van Smoorenburg <miquels at cistron.nl>.
-# Modified for Debian GNU/Linux by Ian Murdock <imurdock at gnu.org>.
-# Modified for Debian by Christoph Lameter <clameter at debian.org>
-# Modified for openembedded by Bruno Randolf <bruno.randolf at 4g-systems.biz>
-
-PATH=/bin:/usr/bin:/sbin:/usr/sbin
-DAEMON=/usr/sbin/netserver
-
-test -f $DAEMON || exit 0
-
-case "$1" in
- start)
- echo -n "Starting network benchmark server: netserver"
- start-stop-daemon -S -x $DAEMON > /dev/null 2>&1
- echo "."
- ;;
- stop)
- echo -n "Stopping network benchmark server: netserver"
- start-stop-daemon -K -x $DAEMON
- echo "."
- ;;
- #reload)
- #
- # If the daemon can reload its config files on the fly
- # for example by sending it SIGHUP, do it here.
- #
- # If the daemon responds to changes in its config file
- # directly anyway, make this a do-nothing entry.
- #
- # start-stop-daemon --stop --signal 1 --verbose --exec $DAEMON
- # ;;
- restart|force-reload)
- #
- # If the "reload" option is implemented, move the "force-reload"
- # option to the "reload" entry above. If not, "force-reload" is
- # just the same as "restart".
- #
- start-stop-daemon -K -x $DAEMON
- sleep 1
- start-stop-daemon -S -x $DAEMON
- ;;
- *)
- echo "Usage: /etc/init.d/netperf {start|stop|restart|force-reload}"
- exit 1
- ;;
-esac
-
-exit 0
diff --git a/recipes-connectivity/netperf/netperf-2.4.4/vfork.patch b/recipes-connectivity/netperf/netperf-2.4.4/vfork.patch
deleted file mode 100755
index dbef553..0000000
--- a/recipes-connectivity/netperf/netperf-2.4.4/vfork.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-If HAVE_FORK is defined, use fork().
-Otherwise, use vfork() instead.
-
-Derived from OpenEmbedded project
-
-Signed-off-by: Dongxiao Xu <dongxiao.xu at intel.com>
-
-Upstream-Status: Pending
-
---- netperf-2.4.4/src/netserver.c 2007-10-17 17:09:12.000000000 -0400
-+++ netperf-2.4.4.new/src/netserver.c 2011-01-23 12:26:39.000000000 -0500
-@@ -567,7 +567,11 @@
- fflush (stdin);
- fflush (stdout);
- fflush (stderr);
-+#if defined(HAVE_FORK)
- switch (fork())
-+#else
-+ switch (vfork())
-+#endif
- {
- case -1:
- perror("netperf server error");
-@@ -712,7 +716,11 @@
- #else
- signal(SIGCLD, SIG_IGN);
-
-+#if defined(HAVE_FORK)
- switch (fork())
-+#else
-+ switch (vfork())
-+#endif
- {
- case -1:
- /* something went wrong */
diff --git a/recipes-connectivity/netperf/netperf_2.4.4.bb b/recipes-connectivity/netperf/netperf_2.4.4.bb
deleted file mode 100644
index 26faba0..0000000
--- a/recipes-connectivity/netperf/netperf_2.4.4.bb
+++ /dev/null
@@ -1,46 +0,0 @@
-DESCRIPTION="Network performance benchmark including tests for TCP, UDP, sockets, ATM and more."
-SECTION = "console/network"
-HOMEPAGE = "http://www.netperf.org/"
-LICENSE = "netperf"
-LIC_FILES_CHKSUM = "file://COPYING;md5=a0ab17253e7a3f318da85382c7d5d5d6"
-PR = "r0"
-
-SRC_URI="ftp://ftp.netperf.org/netperf/archive/netperf-${PV}.tar.bz2 \
- file://cpu_set.patch \
- file://vfork.patch \
- file://init"
-
-inherit update-rc.d autotools
-
-S = "${WORKDIR}/netperf-${PV}"
-
-# cpu_set.patch plus _GNU_SOURCE makes src/netlib.c compile with CPU_ macros
-CFLAGS_append = " -DDO_UNIX -DDO_IPV6 -D_GNU_SOURCE"
-
-do_install() {
- install -d ${D}${sbindir} ${D}${bindir} ${D}${sysconfdir}/init.d
- install -m 4755 src/netperf ${D}${bindir}
- install -m 4755 src/netserver ${D}${sbindir}
- install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/netperf
-
- # man
- install -d ${D}${mandir}/man1/
- install -m 0644 doc/netserver.man ${D}${mandir}/man1/netserver.1
- install -m 0644 doc/netperf.man ${D}${mandir}/man1/netperf.1
-
- # move scripts to examples directory
- install -d ${D}${docdir}/netperf/examples
- install -m 0644 doc/examples/*_script ${D}${docdir}/netperf/examples/
-
- # docs ..
- install -m 0644 COPYING ${D}${docdir}/netperf
- install -m 0644 Release_Notes ${D}${docdir}/netperf
- install -m 0644 README ${D}${docdir}/netperf
- install -m 0644 doc/netperf_old.ps ${D}${docdir}/netperf
-}
-
-INITSCRIPT_NAME="netperf"
-INITSCRIPT_PARAMS="defaults"
-
-SRC_URI[md5sum] = "0e942f22864e601406a994420231075b"
-SRC_URI[sha256sum] = "28e76af491ea3696885e4558ae2f5628a4b9ebdbefc2f1d9cf1b35db2813e497"
--
1.8.1.2
More information about the yocto
mailing list