[yocto] ADT Install Issues
Precipice Development
precipice.development at gmail.com
Wed May 22 10:03:00 PDT 2013
Some progress. Thanks for your help. My notes are below. I found a path
to get it working but not as per documentation
I did use my own rootfs image. In the adt_installer.conf file I had the
following:
YOCTOADT_ROOTFS_mips="minimal-dev sato-sdk"
YOCTOADT_TARGET_SYSROOT_IMAGE_mips="minimal-dev"
YOCTOADT_TARGET_SYSROOT_LOC_mips="$HOME/adt/sysroots/mips"
In my eclipse preferences for ADT, I have sysroot pointed to the
I also
grabbed file:///home/jph/downloads/core-image-minimal-dev-routerstationpro.tar.bz2
and did a runqemu-extract-sdk as a test. Pointed my sysroots to the
extracted folder. I get the same error in Eclipse. I went ahead and
grabbed the sato image for RSPro and repeated. Reconfigure projects worked
and gave me an info message only:
Missing PROG mips-poky-linux-dlltool
Missing PROG dlltool hw3
Missing PROG mips-poky-linux-mt
>From this image the build worked. Not sure why I am getting those errors
with the dev image however (both mine and the downloaded one).
On Tue, May 21, 2013 at 10:40 PM, Rudolf Streif <rstreif at linuxfoundation.org
> wrote:
> What root file system are you using with your Eclipse ADT setup? If you
> are using one of the default ones that you can specify in
> adt_installer.conf or your own?
>
> In any case it looks as if your root file system image is not suitable for
> development work. You would need to use image targets that end in *-dev or
> *-sdk such as core-image-minimal-dev.
>
> Rudi
>
--
Precipice Development International
http://www.precipicedevelopment.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130522/a9f46316/attachment.html>
More information about the yocto
mailing list