[yocto] [meta-raspberrypi][PATCH 6/7] userland: Update to 8700279495e266378d36092ccf86424f0ee2539f
Andrei Gherzan
andrei at gherzan.ro
Wed Mar 13 10:44:54 PDT 2013
Merged.
On Sun, Feb 10, 2013 at 12:11 AM, Andrei Gherzan <andrei at gherzan.ro> wrote:
> * install_vmcs not needed anymore
> * By default package is installed in /opt/vc. Move everything in ${prefix}.
> * Move recipe in recipes-graphics
> * Add PACKAGE_ARCH = MACHINE_ARCH
>
> Signed-off-by: Andrei Gherzan <andrei at gherzan.ro>
> ---
> recipes-bcm/userland/userland-git/install_vmcs | 279
> ------------------------
> recipes-bcm/userland/userland_git.bb | 43 ----
> recipes-graphics/userland/userland_git.bb | 39 ++++
> 3 files changed, 39 insertions(+), 322 deletions(-)
> delete mode 100755 recipes-bcm/userland/userland-git/install_vmcs
> delete mode 100644 recipes-bcm/userland/userland_git.bb
> create mode 100644 recipes-graphics/userland/userland_git.bb
>
> diff --git a/recipes-bcm/userland/userland-git/install_vmcs
> b/recipes-bcm/userland/userland-git/install_vmcs
> deleted file mode 100755
> index 980522e..0000000
> --- a/recipes-bcm/userland/userland-git/install_vmcs
> +++ /dev/null
> @@ -1,279 +0,0 @@
> -#!/bin/sh
> -
> -# edit this file only at <vc4>\makefiles\cmake\scripts\install_vmcs
> -# update (via root staging area) using cmake {args} <vc4>, etc.
> -
> -cmd="$0"
> -cmd_dir="`dirname -- "$cmd"`"
> -cmd_dir=`(cd "$cmd_dir">/dev/null;pwd)`
> -cmd_name="`basename -- $cmd`"
> -
> -# this command should be run as root from ${dir_install}/sbin
> -
> -dir_install="`dirname -- "$cmd_dir"`"
> -dir_data="$dir_install/share/install"
> -dir_sd="/sd"
> -
> -do_force=false
> -
> -# install contents of $dir_data into the system
> -
> -if [ "`whoami`" != "root" ]; then
> - echo "$cmd_name: you need to be root to execute this command">&2
> - exit 1
> -fi
> -
> -[ "_$1" = "_-f" -o "_$1" = "_--force" ] && { do_force=true; shift; }
> -
> -
> -# Uninstall script
> -
> -#################################
> -#################################
> -
> -create_uninstall()
> -{ cat <<'EOF'
> -#!/bin/sh
> -
> -####
> -#### WARNING: this script is written and overwritten by $cmd - don't edit
> -####
> -
> -cmd="$0"
> -cmd_dir="`dirname -- "$cmd"`"
> -cmd_dir=`(cd "$cmd_dir">/dev/null;pwd)`
> -cmd_name="`basename -- "$cmd"`"
> -
> -# this command should be run from <dir_install>/sbin
> -
> -if [ "`whoami`" != "root" ]; then
> - echo "$cmd_name: you need to be root to execute this command">&2
> - exit 1
> -fi
> -
> -# uninstall the new libraries
> -
> -if [ -f /etc/ld.so.conf.d/vmcs.conf ]; then
> - rm /etc/ld.so.conf.d/vmcs.conf
> - ldconfig
> -fi
> -
> -vcfiled=/etc/init.d/vcfiled
> -if [ -x $vcfiled ]; then
> - $vcfiled stop
> - if update-rc.d -f vcfiled remove; then
> - rm -f $vcfiled
> - else
> - echo "$cmd_name: failed to install $vcfiled, sorry">&2
> - fi
> -fi
> -
> -EOF
> -}
> -
> -
> -#################################
> -#################################
> -
> -rc=0
> -
> -# install un-installation script
> -
> -if [ -f "$cmd_dir/uninstall_vmcs" ]; then
> - if mv -f "$cmd_dir/uninstall_vmcs" "$cmd_dir/uninstall_last_vmcs";
> then
> - echo "$cmd_name: previous installation's uninstallation script
> saved in">&2
> - echo "$cmd_name: $cmd_dir/uninstall_last_vmcs">&2
> - else
> - echo "$cmd_name: failed to rename previous installation's
> uninstallation script">&2
> - fi
> -fi
> -create_uninstall > "$cmd_dir/uninstall_vmcs"
> -chmod +x "$cmd_dir/uninstall_vmcs"
> -
> -# install the new libraries
> -
> -if $do_force || [ -d /etc/ld.so.conf.d ]; then
> - if $do_force || [ ! -f /etc/ld.so.conf.d/vmcs.conf ]; then
> - if [ ! -f "$dir_data/vmcs.conf" ]; then
> - echo "$cmd_name: expected file missing in
> $dir_data/vmcs.conf">&2
> - rc=1
> - else
> - mkdir -p /etc/ld.so.conf.d
> - cp -af "$dir_data/vmcs.conf" /etc/ld.so.conf.d/vmcs.conf
> - ldconfig
> - fi
> - fi
> -else
> - echo "$cmd_name: don't know how to install libraries, sorry">&2
> - rc=2
> -fi
> -
> -# install VC file daemon
> -
> -if $do_force || [ ! -f /etc/init.d/vcfiled ]; then
> - if [ ! -f "$dir_data/vcfiled" ]; then
> - echo "$cmd_name: expected file missing in $dir_data/vcfiled">&2
> - rc=3
> - else
> - cp -af "$dir_data/vcfiled" /etc/init.d/vcfiled
> - if ! update-rc.d vcfiled defaults 16; then
> - echo "$cmd_name: don't know how to install new
> /etc/init.d/vcfiled, sorry">&2
> - rc=4
> - elif ! update-rc.d vcfiled enable; then
> - echo "$cmd_name: failed to enable new /etc/init.d/vcfiled,
> sorry">&2
> - rc=5
> - fi
> - fi
> -fi
> -
> -# make sure vchiq device finder is installed
> -
> -if $do_force || [ ! -f /etc/init.d/vchiq ]; then
> - if [ ! -f "$dir_data/vchiq" ]; then
> - echo "$cmd_name: expected file missing in $dir_data/vchiq">&2
> - else
> - cp -af "$dir_data/vchiq" /etc/init.d/vchiq
> - if ! update-rc.d vchiq defaults 12; then
> - echo "$cmd_name: don't know how to install new
> /etc/init.d/vchiq, sorry">&2
> - rc=6
> - elif ! update-rc.d vchiq enable; then
> - echo "$cmd_name: failed to enable new /etc/init.d/vchiq,
> sorry">&2
> - rc=7
> - fi
> - fi
> -fi
> -
> -# set up a module directory from SD card if possible
> -
> -current_moddir=/lib/modules
> -pkg_moddir=${dir_install}$current_moddir
> -sd_moddir=/boot$current_moddir
> -
> -if [ -h "$pkg_moddir" ]; then
> - # this should never have been made into a symbolic link - it will mean
> - # different things on the ARM and the build machines
> - # Unfortunately a previous version of this script made it symbolic
> - rm "$pkg_moddir"
> - echo "------------------------"
> - echo "$cmd_name: Damage to $pkg_moddir caused by previous script
> version has"
> - echo "$cmd_name: been corrected. Sorry, but you have to re-build the
> "
> - echo "$cmd_name: vchiq module now"
> - echo "------------------------"
> -fi
> -
> -if $do_force || [ ! -f "$pkg_moddir" ]; then
> - if [ -d "$sd_moddir" ]; then
> - echo "$cmd_name: Installing any newer modules from SD card"
> - cp -auT "$sd_moddir" "$current_moddir"
> - fi
> -fi
> -
> -# install the vchiq module from install dir (if present)
> -
> -current_mod=${current_moddir}/`uname -r`/extra/vchiq.ko
> -pkg_mod=${dir_install}$current_mod
> -
> -if [ -f "$pkg_mod" ]; then
> - if $do_force || \
> - [ ! -f "$current_mod" ] || \
> - [ "$pkg_mod" -nt "$current_mod" ]; then
> - mkdir -p "`dirname -- "$current_mod"`"
> - # copy new vchiq module over - try to keep same date for debugging
> - if cp -af "$pkg_mod" "$current_mod"; then
> - echo "$cmd_name: updated vchiq module taken from
> $pkg_moddir">&2
> - else
> - echo "$cmd_name: couldn't overwrite $current_mod">&2
> - rc=8
> - fi
> - fi
> -fi
> -
> -if [ ! -f "$current_mod" ]; then
> - echo "$cmd_name: no vchiq module found for this kernel (`uname
> -r`)">&2
> - rc=9
> -else
> - # make sure the module is loaded automatically when we reboot
> - # before the vcqhiq script runs by placing its name in /etc/modules
> - # (This is suppose to have been done already in mklinux)
> - if ! grep "^vchiq$" /etc/modules>/dev/null; then
> - echo vchiq >> /etc/modules
> - fi
> -fi
> -
> -if $do_force || [ ! -f "${current_moddir}/`uname -r`/modules.dep" ]; then
> - depmod
> -fi
> -
> -# install vlls
> -
> -if $do_force || [ ! -f "$dir_sd/vlls" ]; then
> - if [ -d /boot/vlls/ ]; then
> - # remove $dir_sd/vlls assuming it is a symbolic link
> - rm -f "$dir_sd/vlls"
> - ln -s /boot/vlls "$dir_sd/vlls"
> - else
> - echo "$cmd_name: Warning - no VLLs in $dir_sd/vlls">&2
> - echo "$cmd_name: installation would normally link this location
> to /boot/vlls"
> - echo "$cmd_name: ensure VLLs are present in /boot/vlls (probably
> the "
> - echo "$cmd_name: DOS partition of your SD card), and rerun this "
> - echo "$cmd_name: installation">&2
> - fi
> -fi
> -
> -# warn about empty media files ... player X needs some
> -
> -if [ -d "$dir_install/mediafiles/" -a ! -d "$dir_sd/mediafiles" ]; then
> - rm -f "$dir_sd/mediafiles"
> - ln -s "$dir_install/mediafiles" "$dir_sd/mediafiles"
> -elif [ ! -d "$dir_sd/mediafiles/" ]; then
> - echo "$cmd_name: warning - $dir_sd/mediafiles does not exist, some
> applications require this">&2
> -else
> - filecount=`ls "$dir_sd/mediafiles/" | wc -l`
> - if [ -z "$filecount" -o $filecount -eq 0 ]; then
> - echo "$cmd_name: warning - /sd/mediafiles is empty, some apps
> need content">&2
> - fi
> -fi
> -
> -
> -# start up anything we rely on
> -
> -if [ -x /sbin/modprobe -a -f /proc/modules ]; then
> - modprobe -q vchiq
> -fi
> -
> -if [ -x /etc/init.d/vchiq ]; then
> - if ! /etc/init.d/vchiq start; then
> - echo "$cmd_name: /etc/init.d/vchiq failed - rc $?"
> - rc=10
> - fi
> -else
> - echo "$cmd_name: couldn't find expected file - /etc/init.d/vchiq">&2
> - rc=11
> -fi
> -
> -if [ -x /etc/init.d/vcfiled ]; then
> - if ! /etc/init.d/vcfiled start; then
> - echo "$cmd_name: /etc/init.d/vcfiled failed - rc $?"
> - rc=12
> - elif ! pidof vcfiled>/dev/null; then
> - echo "$cmd_name: vcfiled daemon not started"
> - if [ ! -x "${dir_install}/sbin/vcfiled" ]; then
> - echo "$cmd_name: ${dir_install}/sbin/vcfiled missing or bad?"
> - rc=13
> - elif ! head -0 /dev/vchiq >/dev/null; then
> - echo "$cmd_name: /dev/vchiq bad?"
> - echo "$cmd_name: vchiq module file information -"
> - ls -l "$current_mod"
> - rc=14
> - else
> - echo "$cmd_name: /etc/init.d/vcfiled bad?"
> - rc=15
> - fi
> - fi
> -else
> - echo "$cmd_name: couldn't find expected file - /etc/init.d/vcfiled">&2
> - rc=16
> -fi
> -
> -exit $rc
> -
> diff --git a/recipes-bcm/userland/userland_git.bb b/recipes-bcm/userland/
> userland_git.bb
> deleted file mode 100644
> index c2c6641..0000000
> --- a/recipes-bcm/userland/userland_git.bb
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -DESCRIPTION = "This repository contains the source code for the ARM side \
> -libraries used on Raspberry Pi. These typically are installed in
> /opt/vc/lib \
> -and includes source for the ARM side code to interface to: EGL, mmal,
> GLESv2,\
> -vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG."
> -LICENSE = "Broadcom"
> -LIC_FILES_CHKSUM = "file://LICENCE;md5=957f6640d5e2d2acfce73a36a56cb32f"
> -
> -PR = "r0"
> -
> -PROVIDES = "virtual/libgles2 \
> - virtual/egl"
> -COMPATIBLE_MACHINE = "raspberrypi"
> -
> -SRCREV = "ef62d33406ee01864d58b80f6d0c0355ed86aaa1"
> -SRC_URI = "git://
> github.com/raspberrypi/userland.git;protocol=git;branch=master \
> - file://install_vmcs \
> - "
> -S = "${WORKDIR}/git"
> -
> -inherit cmake
> -
> -EXTRA_OECMAKE = " \
> - -DCMAKE_BUILD_TYPE=Release \
> - "
> -
> -do_configure_prepend () {
> - sed -i "/10-vchiq.rules/d" ${S}/interface/vchiq_arm/CMakeLists.txt
> - mkdir -p makefiles/cmake/scripts
> - cp ${WORKDIR}/install_vmcs ${S}/makefiles/cmake/scripts
> -}
> -
> -FILES_${PN} = "/opt/vc/lib/*.so \
> - /opt/vc/sbin \
> - /opt/vc/bin \
> - /etc \
> - "
> -FILES_${PN}-dbg += "/opt/vc/lib/.debug \
> - /opt/vc/sbin/.debug \
> - /opt/vc/bin/.debug \
> - "
> -FILES_${PN}-dev = "/opt/vc/include/"
> -FILES_${PN}-staticdev = "/opt/vc/lib/*.a"
> -FILES_${PN}-doc = "/opt/vc/share/"
> \ No newline at end of file
> diff --git a/recipes-graphics/userland/userland_git.bbb/recipes-graphics/userland/
> userland_git.bb
> new file mode 100644
> index 0000000..fe4132a
> --- /dev/null
> +++ b/recipes-graphics/userland/userland_git.bb
> @@ -0,0 +1,39 @@
> +DESCRIPTION = "This repository contains the source code for the ARM side \
> +libraries used on Raspberry Pi. These typically are installed in
> /opt/vc/lib \
> +and includes source for the ARM side code to interface to: EGL, mmal,
> GLESv2,\
> +vcos, openmaxil, vchiq_arm, bcm_host, WFC, OpenVG."
> +LICENSE = "Broadcom"
> +LIC_FILES_CHKSUM = "file://LICENCE;md5=957f6640d5e2d2acfce73a36a56cb32f"
> +
> +PR = "r1"
> +
> +PROVIDES = "virtual/libgles2 \
> + virtual/egl"
> +COMPATIBLE_MACHINE = "raspberrypi"
> +
> +SRCREV = "8700279495e266378d36092ccf86424f0ee2539f"
> +SRC_URI = "git://
> github.com/raspberrypi/userland.git;protocol=git;branch=master \
> + "
> +S = "${WORKDIR}/git"
> +
> +inherit cmake
> +
> +EXTRA_OECMAKE = " \
> + -DCMAKE_BUILD_TYPE=Release \
> + "
> +# The compiled binaries don't provide sonames.
> +SOLIBS = "${SOLIBSDEV}"
> +
> +do_install_append() {
> + mkdir -p ${D}/${prefix}
> + mv ${D}/opt/vc/* ${D}/${prefix}
> + rm -rf ${D}/opt
> +}
> +
> +FILES_${PN} += "${libdir}/*${SOLIBS}"
> +FILES_${PN}-dev = "${includedir} \
> + ${prefix}/src"
> +FILES_${PN}-doc += "${datadir}/install"
> +
> +PACKAGE_ARCH = "${MACHINE_ARCH}"
> +
> --
> 1.7.9.5
>
>
--
*Andrei Gherzan*
m: +40.744.478.414 | f: +40.31.816.28.12
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130313/e83abc98/attachment.html>
More information about the yocto
mailing list