[yocto] Application Development

Mon Jun 10 03:03:35 PDT 2013

Any updates on this matter? Do I need to provide more information?
/Hans

On Fri, Jun 7, 2013 at 4:29 PM, Hans Beckérus <hans.beckerus at gmail.com> wrote:
> On Fri, Jun 7, 2013 at 4:21 PM, Zhang, Jessica <jessica.zhang at intel.com> wrote:
>> When you create your image, what profile did you use.  Are you building one of our existing images, e.g. core-image-minimal, etc. or it's a customized image and if so, how did you customize your image, via layer or install extra packages?  I think x11 is brought in via some package dependency.  You said you were able to build the image, was the x11 packages there?  We're building a toolchain plus the sysroot that matching the rootfs of your target image here so it's not just the toolchain that is built.
>>
>
> Hi Jessica.
>
> I am building my own image recipe that basically does:
>
> require recipes-core/images/core-image-minimal-mtdutils.bb
> IMAGE_FEATURES += " ssh-server-dropbear \
>                   "
>
> Its a console-only type of image for an embedded device with no
> graphic support what so ever.
> Building the the rootfs and booting it up on the device works fine.
> I have had no X11 dependency until I added tools-sdk to IMAGE_FEATURES
> as suggested.
> What I am after is a command-line-only toolchain which will be using
> the sysroot from my rootfs build.
> Maybe I am asking for something that is not supported?
>
> Hans
>
>
>> -----Original Message-----
>> From: Hans Beckérus [mailto:hans.beckerus at gmail.com]
>> Sent: Friday, June 07, 2013 7:09 AM
>> To: Zhang, Jessica
>> Cc: DAMARLA Satya Swaroop; yocto at yoctoproject.org
>> Subject: Re: [yocto] Application Development
>>
>> On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zhang at intel.com> wrote:
>>> Yes, you need those packages in your sysroot for cross development.
>>>
>>>
>> Ok. But out of curiosity, why should I need X11 packages for a simple command-line based toolchain?
>> I assume that none of these X11 packages gets copied to my target device rootfs, or?
>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: satyaswaroop.damarla at gmail.com
>>> [mailto:satyaswaroop.damarla at gmail.com]
>>> On Behalf Of DAMARLA Satya Swaroop
>>> Sent: Friday, June 07, 2013 12:10 AM
>>> To: Zhang, Jessica; yocto at yoctoproject.org
>>> Subject: Re: [yocto] Application Development
>>>
>>>
>>>
>>> SHould we install development and debigging pacakages in the images
>>> when we want to build a toolchain.. I mean this
>>>
>>>
>>>
>>>  "dbg-pkgs"       - add -dbg packages for all installed packages
>>>
>>> #                     (adds symbol information for debugging/profiling)
>>>
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>>
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>>
>>>
>>>
>>> Greets,
>>>
>>> Satya
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> Hi Jessica & Philip,
>>>
>>>
>>>
>>> I have an issue... This is such a long error ... I even did a fresh
>>> build by deleting the "tmp" directory. The image build went very well
>>> but the toolchain is always giving me a error...
>>>
>>>
>>>
>>> | Selecting previously unselected package xz-dev.
>>>
>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>
>>> | The following package disappeared from your system as
>>>
>>> | all files have been overwritten by other packages:
>>>
>>> |   avahi
>>>
>>> | log_check: Using
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> as logfile
>>>
>>> | Logfile is clean
>>>
>>> | Installing NATIVESDK packages
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Get:1 file: ./ Release [24 B]
>>>
>>> | Get:2 file: ./ Release [11 B]
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Reading package lists...
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | Reading package lists...
>>>
>>> | Building dependency tree...
>>>
>>> | Reading state information...
>>>
>>> | Some packages could not be installed. This may mean that you have
>>>
>>> | requested an impossible situation or if you are using the unstable
>>>
>>> | distribution that some required packages have not yet been created
>>>
>>> | or been moved out of Incoming.
>>>
>>> | The following information may help to resolve the situation:
>>>
>>> |
>>>
>>> | The following packages have unmet dependencies:
>>>
>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: gcc-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: meta-environment-arm but
>>> | it is
>>> not installable
>>>
>>> |                                    Depends:
>>> | binutils-cross-canadian-arm
>>> but it is not installable
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | E: Unable to correct problems, you have held broken packages.
>>>
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>> | ERROR: Function failed: populate_sdk_image (see
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> for further information)
>>>
>>> ERROR: Task 10
>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid
>>> ata.bb,
>>> do_populate_sdk) failed with exit code '1'
>>>
>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>> be rerun and 1 failed.
>>>
>>>
>>>
>>> Summary: 1 task failed:
>>>
>>>
>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida
>>> ta.bb,
>>> do_populate_sdk
>>>
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>>
>>> I am not able to install those packages as they say there are no
>>> installation candidate for them...
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica
>>> <jessica.zhang at intel.com>
>>> wrote:
>>>
>>> Hi Satya,
>>>
>>>
>>>
>>> Use bitbake image-name -c populate_sdk, this allows you to create a
>>> toolchain with sysroot that match your target image that allows you to
>>> develop app against...
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: yocto-bounces at yoctoproject.org
>>> [mailto:yocto-bounces at yoctoproject.org]
>>> On Behalf Of Satya Swaroop Damarla
>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>> To: yocto at yoctoproject.org
>>> Subject: [yocto] Application Development
>>>
>>>
>>>
>>> Hi Guys,
>>>
>>>
>>>
>>> I have an issue... I created a custom image based on NVIDIA Tegra2
>>> with a custom kernel. I installed  packages specific Tegra board and
>>> application specific. Now we want to send the baord and the new linux
>>> image for application development...
>>>
>>>
>>>
>>> As I went through ADT manual, I only found qemu based toolchains but I
>>> want to create toolchain based on my rootfs and kernel... so that the
>>> development team can develop a voip application for the board... I am
>>> kind of stuck how to proceed in this issue...
>>>
>>>
>>>
>>> I really need a small way out and hopefully I will catch things
>>> automatically..
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Satya
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>>
>> On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zhang at intel.com> wrote:
>>> Yes, you need those packages in your sysroot for cross development.
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: satyaswaroop.damarla at gmail.com
>>> [mailto:satyaswaroop.damarla at gmail.com]
>>> On Behalf Of DAMARLA Satya Swaroop
>>> Sent: Friday, June 07, 2013 12:10 AM
>>> To: Zhang, Jessica; yocto at yoctoproject.org
>>> Subject: Re: [yocto] Application Development
>>>
>>>
>>>
>>> SHould we install development and debigging pacakages in the images
>>> when we want to build a toolchain.. I mean this
>>>
>>>
>>>
>>>  "dbg-pkgs"       - add -dbg packages for all installed packages
>>>
>>> #                     (adds symbol information for debugging/profiling)
>>>
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>>
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>>
>>>
>>>
>>> Greets,
>>>
>>> Satya
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> Hi Jessica & Philip,
>>>
>>>
>>>
>>> I have an issue... This is such a long error ... I even did a fresh
>>> build by deleting the "tmp" directory. The image build went very well
>>> but the toolchain is always giving me a error...
>>>
>>>
>>>
>>> | Selecting previously unselected package xz-dev.
>>>
>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>
>>> | The following package disappeared from your system as
>>>
>>> | all files have been overwritten by other packages:
>>>
>>> |   avahi
>>>
>>> | log_check: Using
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> as logfile
>>>
>>> | Logfile is clean
>>>
>>> | Installing NATIVESDK packages
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Get:1 file: ./ Release [24 B]
>>>
>>> | Get:2 file: ./ Release [11 B]
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Reading package lists...
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | Reading package lists...
>>>
>>> | Building dependency tree...
>>>
>>> | Reading state information...
>>>
>>> | Some packages could not be installed. This may mean that you have
>>>
>>> | requested an impossible situation or if you are using the unstable
>>>
>>> | distribution that some required packages have not yet been created
>>>
>>> | or been moved out of Incoming.
>>>
>>> | The following information may help to resolve the situation:
>>>
>>> |
>>>
>>> | The following packages have unmet dependencies:
>>>
>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: gcc-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: meta-environment-arm but
>>> | it is
>>> not installable
>>>
>>> |                                    Depends:
>>> | binutils-cross-canadian-arm
>>> but it is not installable
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | E: Unable to correct problems, you have held broken packages.
>>>
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>> | ERROR: Function failed: populate_sdk_image (see
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> for further information)
>>>
>>> ERROR: Task 10
>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid
>>> ata.bb,
>>> do_populate_sdk) failed with exit code '1'
>>>
>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>> be rerun and 1 failed.
>>>
>>>
>>>
>>> Summary: 1 task failed:
>>>
>>>
>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida
>>> ta.bb,
>>> do_populate_sdk
>>>
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>>
>>> I am not able to install those packages as they say there are no
>>> installation candidate for them...
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica
>>> <jessica.zhang at intel.com>
>>> wrote:
>>>
>>> Hi Satya,
>>>
>>>
>>>
>>> Use bitbake image-name -c populate_sdk, this allows you to create a
>>> toolchain with sysroot that match your target image that allows you to
>>> develop app against...
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: yocto-bounces at yoctoproject.org
>>> [mailto:yocto-bounces at yoctoproject.org]
>>> On Behalf Of Satya Swaroop Damarla
>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>> To: yocto at yoctoproject.org
>>> Subject: [yocto] Application Development
>>>
>>>
>>>
>>> Hi Guys,
>>>
>>>
>>>
>>> I have an issue... I created a custom image based on NVIDIA Tegra2
>>> with a custom kernel. I installed  packages specific Tegra board and
>>> application specific. Now we want to send the baord and the new linux
>>> image for application development...
>>>
>>>
>>>
>>> As I went through ADT manual, I only found qemu based toolchains but I
>>> want to create toolchain based on my rootfs and kernel... so that the
>>> development team can develop a voip application for the board... I am
>>> kind of stuck how to proceed in this issue...
>>>
>>>
>>>
>>> I really need a small way out and hopefully I will catch things
>>> automatically..
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Satya
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>
> On Fri, Jun 7, 2013 at 4:21 PM, Zhang, Jessica <jessica.zhang at intel.com> wrote:
>> When you create your image, what profile did you use.  Are you building one of our existing images, e.g. core-image-minimal, etc. or it's a customized image and if so, how did you customize your image, via layer or install extra packages?  I think x11 is brought in via some package dependency.  You said you were able to build the image, was the x11 packages there?  We're building a toolchain plus the sysroot that matching the rootfs of your target image here so it's not just the toolchain that is built.
>>
>> -----Original Message-----
>> From: Hans Beckérus [mailto:hans.beckerus at gmail.com]
>> Sent: Friday, June 07, 2013 7:09 AM
>> To: Zhang, Jessica
>> Cc: DAMARLA Satya Swaroop; yocto at yoctoproject.org
>> Subject: Re: [yocto] Application Development
>>
>> On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zhang at intel.com> wrote:
>>> Yes, you need those packages in your sysroot for cross development.
>>>
>>>
>> Ok. But out of curiosity, why should I need X11 packages for a simple command-line based toolchain?
>> I assume that none of these X11 packages gets copied to my target device rootfs, or?
>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: satyaswaroop.damarla at gmail.com
>>> [mailto:satyaswaroop.damarla at gmail.com]
>>> On Behalf Of DAMARLA Satya Swaroop
>>> Sent: Friday, June 07, 2013 12:10 AM
>>> To: Zhang, Jessica; yocto at yoctoproject.org
>>> Subject: Re: [yocto] Application Development
>>>
>>>
>>>
>>> SHould we install development and debigging pacakages in the images
>>> when we want to build a toolchain.. I mean this
>>>
>>>
>>>
>>>  "dbg-pkgs"       - add -dbg packages for all installed packages
>>>
>>> #                     (adds symbol information for debugging/profiling)
>>>
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>>
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>>
>>>
>>>
>>> Greets,
>>>
>>> Satya
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> Hi Jessica & Philip,
>>>
>>>
>>>
>>> I have an issue... This is such a long error ... I even did a fresh
>>> build by deleting the "tmp" directory. The image build went very well
>>> but the toolchain is always giving me a error...
>>>
>>>
>>>
>>> | Selecting previously unselected package xz-dev.
>>>
>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>
>>> | The following package disappeared from your system as
>>>
>>> | all files have been overwritten by other packages:
>>>
>>> |   avahi
>>>
>>> | log_check: Using
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> as logfile
>>>
>>> | Logfile is clean
>>>
>>> | Installing NATIVESDK packages
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Get:1 file: ./ Release [24 B]
>>>
>>> | Get:2 file: ./ Release [11 B]
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Reading package lists...
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | Reading package lists...
>>>
>>> | Building dependency tree...
>>>
>>> | Reading state information...
>>>
>>> | Some packages could not be installed. This may mean that you have
>>>
>>> | requested an impossible situation or if you are using the unstable
>>>
>>> | distribution that some required packages have not yet been created
>>>
>>> | or been moved out of Incoming.
>>>
>>> | The following information may help to resolve the situation:
>>>
>>> |
>>>
>>> | The following packages have unmet dependencies:
>>>
>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: gcc-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: meta-environment-arm but
>>> | it is
>>> not installable
>>>
>>> |                                    Depends:
>>> | binutils-cross-canadian-arm
>>> but it is not installable
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | E: Unable to correct problems, you have held broken packages.
>>>
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>> | ERROR: Function failed: populate_sdk_image (see
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> for further information)
>>>
>>> ERROR: Task 10
>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid
>>> ata.bb,
>>> do_populate_sdk) failed with exit code '1'
>>>
>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>> be rerun and 1 failed.
>>>
>>>
>>>
>>> Summary: 1 task failed:
>>>
>>>
>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida
>>> ta.bb,
>>> do_populate_sdk
>>>
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>>
>>> I am not able to install those packages as they say there are no
>>> installation candidate for them...
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica
>>> <jessica.zhang at intel.com>
>>> wrote:
>>>
>>> Hi Satya,
>>>
>>>
>>>
>>> Use bitbake image-name -c populate_sdk, this allows you to create a
>>> toolchain with sysroot that match your target image that allows you to
>>> develop app against...
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: yocto-bounces at yoctoproject.org
>>> [mailto:yocto-bounces at yoctoproject.org]
>>> On Behalf Of Satya Swaroop Damarla
>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>> To: yocto at yoctoproject.org
>>> Subject: [yocto] Application Development
>>>
>>>
>>>
>>> Hi Guys,
>>>
>>>
>>>
>>> I have an issue... I created a custom image based on NVIDIA Tegra2
>>> with a custom kernel. I installed  packages specific Tegra board and
>>> application specific. Now we want to send the baord and the new linux
>>> image for application development...
>>>
>>>
>>>
>>> As I went through ADT manual, I only found qemu based toolchains but I
>>> want to create toolchain based on my rootfs and kernel... so that the
>>> development team can develop a voip application for the board... I am
>>> kind of stuck how to proceed in this issue...
>>>
>>>
>>>
>>> I really need a small way out and hopefully I will catch things
>>> automatically..
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Satya
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>
>>
>>
>> On Fri, Jun 7, 2013 at 4:03 PM, Zhang, Jessica <jessica.zhang at intel.com> wrote:
>>> Yes, you need those packages in your sysroot for cross development.
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: satyaswaroop.damarla at gmail.com
>>> [mailto:satyaswaroop.damarla at gmail.com]
>>> On Behalf Of DAMARLA Satya Swaroop
>>> Sent: Friday, June 07, 2013 12:10 AM
>>> To: Zhang, Jessica; yocto at yoctoproject.org
>>> Subject: Re: [yocto] Application Development
>>>
>>>
>>>
>>> SHould we install development and debigging pacakages in the images
>>> when we want to build a toolchain.. I mean this
>>>
>>>
>>>
>>>  "dbg-pkgs"       - add -dbg packages for all installed packages
>>>
>>> #                     (adds symbol information for debugging/profiling)
>>>
>>> #  "dev-pkgs"       - add -dev packages for all installed packages
>>>
>>> #                     (useful if you want to develop against libs in the
>>> image)
>>>
>>>
>>>
>>>
>>>
>>> Greets,
>>>
>>> Satya
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 1:07 PM, DAMARLA Satya Swaroop
>>> <swaroop.damarla at gmail.com> wrote:
>>>
>>> Hi Jessica & Philip,
>>>
>>>
>>>
>>> I have an issue... This is such a long error ... I even did a fresh
>>> build by deleting the "tmp" directory. The image build went very well
>>> but the toolchain is always giving me a error...
>>>
>>>
>>>
>>> | Selecting previously unselected package xz-dev.
>>>
>>> | Unpacking xz-dev (from .../xz-dev_5.1.2alpha-r0_armel.deb) ...
>>>
>>> | The following package disappeared from your system as
>>>
>>> | all files have been overwritten by other packages:
>>>
>>> |   avahi
>>>
>>> | log_check: Using
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> as logfile
>>>
>>> | Logfile is clean
>>>
>>> | Installing NATIVESDK packages
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ InRelease
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Ign file: ./ Release.gpg
>>>
>>> | Get:1 file: ./ Release [24 B]
>>>
>>> | Get:2 file: ./ Release [11 B]
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Ign file: ./ Translation-en
>>>
>>> | Reading package lists...
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | Reading package lists...
>>>
>>> | Building dependency tree...
>>>
>>> | Reading state information...
>>>
>>> | Some packages could not be installed. This may mean that you have
>>>
>>> | requested an impossible situation or if you are using the unstable
>>>
>>> | distribution that some required packages have not yet been created
>>>
>>> | or been moved out of Incoming.
>>>
>>> | The following information may help to resolve the situation:
>>>
>>> |
>>>
>>> | The following packages have unmet dependencies:
>>>
>>> |  packagegroup-cross-canadian-arm : Depends: gdb-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: gcc-cross-canadian-arm
>>> | but it
>>> is not installable
>>>
>>> |                                    Depends: meta-environment-arm but
>>> | it is
>>> not installable
>>>
>>> |                                    Depends:
>>> | binutils-cross-canadian-arm
>>> but it is not installable
>>>
>>> | W: Ignoring Provides line with DepCompareOp for package
>>> nativesdk-pkgconfig__pkg-config__
>>>
>>> | W: You may want to run apt-get update to correct these problems
>>>
>>> | E: Unable to correct problems, you have held broken packages.
>>>
>>> | DEBUG: Python function do_populate_sdk finished
>>>
>>> | ERROR: Function failed: populate_sdk_image (see
>>> /home/damarla/yocto/poky/buildSkidataHarmony/tmp/work/skidata_harmony-
>>> poky-linux-gnueabi/core-image-skidata/1.0-r0/temp/log.do_populate_sdk.
>>> 4066
>>> for further information)
>>>
>>> ERROR: Task 10
>>> (/home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skid
>>> ata.bb,
>>> do_populate_sdk) failed with exit code '1'
>>>
>>> NOTE: Tasks Summary: Attempted 5020 tasks of which 4939 didn't need to
>>> be rerun and 1 failed.
>>>
>>>
>>>
>>> Summary: 1 task failed:
>>>
>>>
>>> /home/damarla/yocto/poky/meta/recipes-graphics/images/core-image-skida
>>> ta.bb,
>>> do_populate_sdk
>>>
>>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>>>
>>>
>>>
>>> I am not able to install those packages as they say there are no
>>> installation candidate for them...
>>>
>>>
>>>
>>> On Thu, Jun 6, 2013 at 6:52 AM, Zhang, Jessica
>>> <jessica.zhang at intel.com>
>>> wrote:
>>>
>>> Hi Satya,
>>>
>>>
>>>
>>> Use bitbake image-name -c populate_sdk, this allows you to create a
>>> toolchain with sysroot that match your target image that allows you to
>>> develop app against...
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Jessica
>>>
>>>
>>>
>>> From: yocto-bounces at yoctoproject.org
>>> [mailto:yocto-bounces at yoctoproject.org]
>>> On Behalf Of Satya Swaroop Damarla
>>> Sent: Wednesday, June 05, 2013 6:05 AM
>>> To: yocto at yoctoproject.org
>>> Subject: [yocto] Application Development
>>>
>>>
>>>
>>> Hi Guys,
>>>
>>>
>>>
>>> I have an issue... I created a custom image based on NVIDIA Tegra2
>>> with a custom kernel. I installed  packages specific Tegra board and
>>> application specific. Now we want to send the baord and the new linux
>>> image for application development...
>>>
>>>
>>>
>>> As I went through ADT manual, I only found qemu based toolchains but I
>>> want to create toolchain based on my rootfs and kernel... so that the
>>> development team can develop a voip application for the board... I am
>>> kind of stuck how to proceed in this issue...
>>>
>>>
>>>
>>> I really need a small way out and hopefully I will catch things
>>> automatically..
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Satya
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>>