[yocto] LIC_FILES_CHKSUM points to an invalid file

[Zafrullah Syed]

I am getting these errors when I try my build. Any Idea?

ERROR: Function failed: hello: LIC_FILES_CHKSUM points to an invalid file:
/home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/hello-1.0/COPYING

ERROR: Logfile of failure stored in:
/home/siguser/yocto2013-05-08/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/hello-1.0-r0/temp/log.do_configure.1985

Screen shot of the above error directory. http://imgur.com/zRLKuYj

hello-1.0 is empty but hello-2.7 has all the files extracted.

Why does hello-1.0 exist when i did not include it in my recipe.

my hello.bb recipe:

DESCRIPTION = "GNU Helloworld application"
SECTION = "examples"
LICENSE = "GPLv3+"
LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504"
PR = "r0"
SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
SRC_URI[sha256sum] =
"fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
inherit autotools gettext

Any ideas about this error?

Thank You,

On Tue, Jun 4, 2013 at 9:45 PM, Zafrullah Syed <zafrullahmehdi at gmail.com>wrote:

> Hi,
>
> I followed all the instructions and i started my build again. Build
> successfully started and struck with Hello md5sum error.
>
> ERROR: Fetcher failure for URL: '
> ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz'. No checksum specified for
> /home/siguser/yocto2013-05-21/build/downloads/hello-2.7.tar.gz, please add
> at least one to the recipe:
> SRC_URI[md5sum] = "fc01b05c7f943d3c42124942a2a9bb3a"
> SRC_URI[sha256sum] =
> "fd593b5bcf6d1bb6d7d1bb7eefdccdc0010cf2c4985ccb445ef490f768b927c0"
>
>
> I downloaded hello-2.7 from ftp://ftp.gnu.org/gnu/hello/ unzipped and ran
> md5sum against COPYING file. Each file has different md5sum, which md5sum
> should I include in my hello.bb file?
>
> *My hello.bb file*:
>
> DESCRIPTION = "GNU Helloworld application"
> SECTION = "examples"
> LICENSE = "GPLv3+"
> LIC_FILES_CHKSUM = "file://COPYING;md5=fc01b05c7f943d3c42124942a2a9bb3a"
> PR = "r0"
> SRC_URI = "ftp://ftp.gnu.org/gnu/hello/hello-2.7.tar.gz"
> inherit autotools gettext
>
> Thank You,
>
>
>
>
> On Tue, Jun 4, 2013 at 3:57 PM, Paul Eggleton <
> paul.eggleton at linux.intel.com> wrote:
>
>> On Tuesday 04 June 2013 15:42:06 Zafrullah Syed wrote:
>> > On Tue, Jun 4, 2013 at 3:26 PM, Paul Eggleton <
>> paul.eggleton at linux.intel.com
>> > wrote:
>> > > Yes, conf/bblayers.conf is supposed to be in the build directory; and
>> > > whichever build directory you are actually using. The build directory
>> can
>> > > be anywhere, but you shouldn't really have two build directories
>> unless
>> > > you know what you are doing - did you perhaps run oe-init-build-env
>> with
>> > > no arguments in two different places? I suspect this is what has
>> happened.
>> >
>> > I think yes. I usually give just *source oe-init-build-env *command,
>> this
>> > is how i used earlier and failed. May be that is the reason it has
>> created
>> > another build directory in /poky.
>> > What should be the command before building? i guess this(
>> > TEMPLATECONF=meta-gumstix-extras/conf
>> > source ./poky/oe-init-build-env ). so, every time i just need to give
>> > TEMPLATECONF  command before building?
>>
>> You need to run oe-init-build-env at the start of every session yes, but
>> you
>> shouldn't need to specify TEMPLATECONF except when you first create the
>> build
>> directory. The important thing is you need to be in the same directory
>> when
>> you run oe-init-build-env *or* specify the path to the build directory as
>> a
>> parameter.
>>
>> > Lastly, my meta-bebot directory should be as following ?
>> >
>> > /poky
>> >   --meta-bebot
>> >       --conf
>> >          --layer.conf
>> >   --recipes-bebot
>> >     --hello
>> >       --hello.bb
>>
>> If you have recipes-bebot under meta-bebot, yes.
>>
>> > and meta-bebot path should be set in bblayers.conf file?
>>
>> Yes.
>>
>> Cheers,
>> Paul
>>
>> --
>>
>> Paul Eggleton
>> Intel Open Source Technology Centre
>>
>
>
>
> --
> Regards,
> Zafrullah Syed
>
>


-- 
Regards,
Zafrullah Syed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130605/99d15e5a/attachment.html>