[yocto] Fullpass Test Report for Yocto 1.4 20130115 Build
Saul Wold
saul.wold at intel.com
Fri Jan 25 14:11:21 PST 2013
On 01/25/2013 02:02 PM, Liu, Song wrote:
> Hi Saul/Beth,
>
> What is the issue for the 3 ‘no image’ issue (marked red) in the report?
> Do we have a solution now?
>
That's the preM3 Build. I am looking back in the AB, and I do not see
the master failure for qemumips, we had a problem with PPC due to
oprofile being broken, that has been fixed for M3rc1.
The P1022DS has been failing for a while, I think Matthew needs to give
it some love to make it better.
Sau!
> Thanks!
>
> Song
>
> *From:*Palalau, AlexandruX
> *Sent:* Thursday, January 24, 2013 7:23 AM
> *To:* yocto at yoctoproject.org
> *Cc:* Liu, Song
> *Subject:* Fullpass Test Report for Yocto 1.4 20130115 Build
>
> Hello,
> Here is the fullpass test report for Yocto 1.4 20130115 build. The
> testings for qemuppc, mpc8315e, and p1022ds are blocked since the images
> didn't build out due to some known issues (oprofile and libxml failures).
>
> We have some new bugs regarding CoreBuildSystem (Bug 3745. 3756, 3757).
> Also, there are some problems regarding smart (Bug 3768, 3769). No
> problems under qemu this time.
>
> Attached you can find the full test result.
>
>
>
> *Test Summary
> -------------------------*
>
> *Test Result Summary*
>
> *Component*
>
>
>
> *Target*
>
>
>
> *Status*
>
>
>
> *Comments*
>
> *BSP*
>
>
>
> Beagleboard
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> Routerstationpro
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> Mpc8315e-rdb
>
>
>
> BLOCK
>
>
>
> No image built out
>
>
>
> P1022DS
>
>
>
> BLOCK
>
>
>
> No image built out
>
> *QEMU*
>
>
>
> qemuarm
>
>
>
> GOOD
>
>
>
> Everything runs well
>
> **
>
>
>
> qemux86
>
>
>
> GOOD
>
>
>
> Everything runs well
>
> **
>
>
>
> qemux86-64
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> qemuppc
>
>
>
> GOOD
>
>
>
> Everything runs well
>
>
>
>
>
> qemumips
>
>
>
> BLOCK
>
>
>
> No image built out
>
> *Core Build System*
>
>
>
> BUGGY
>
>
>
> gtk-directfb image build failed; disk space monitoring gives error
> ;Bitbake remake/remake-native check; Compile and load kernel; Crosstap
> script check.
>
> *ADT Toolchain*
>
>
>
> BUGGY
>
>
>
> gtk+-2.0 missing from the userbuilt toolchain; autoreconf run failed
>
> *Compliance*
>
>
>
> Not running
>
> *Stress*
>
>
>
> Beagleboard
>
>
>
> Not running
>
> BLOCK
>
>
>
> Critical bugs, more than 50% test cases are blocked
>
> GOOD
>
>
>
> Only Normal, Minor or Enhancement bugs, less than 10% test cases failed
>
> BUGGY
>
>
>
> Normal, Major and Critical bugs, more than 10% test cases failed
>
> *Detailed Test Result for each component*
>
> *Target*
>
>
>
> *Total TCs*
>
>
>
> *Not Run*
>
>
>
> *Passed*
>
>
>
> *Failed*
>
>
>
> *Not testable (Blocked)*
>
> *Beagleboard Sato-SDK*
>
>
>
> 66
>
>
>
> 0
>
>
>
> 66
>
>
>
> 0
>
>
>
> 0
>
> *Routerstationpro Sato-SDK*
>
>
>
> 43
>
>
>
> 0
>
>
>
> 43
>
>
>
> 0
>
>
>
> 0
>
> *Mpc8315e-rdb Sato-SDK*
>
>
>
> 45
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 45
>
> *P1022DS*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 42 (bug 3476)
>
> *Qemux86*
>
>
>
> 82
>
>
>
> 0
>
>
>
> 82
>
>
>
> 0
>
>
>
> 0
>
> *Qemux86-64*
>
>
>
> 82
>
>
>
> 0
>
>
>
> 82
>
>
>
> 0
>
>
>
> 0
>
> *Qemuarm Sato*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
> *Qemuarm Sato-SDK*
>
>
>
> 47
>
>
>
> 0
>
>
>
> 47
>
>
>
> 0
>
>
>
> 0
>
> *Qemumips Sato*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
> *Qemumips Sato-SDK*
>
>
>
> 47
>
>
>
> 0
>
>
>
> 47
>
>
>
> 0
>
>
>
> 0
>
> *Qemuppc Sato*
>
>
>
> 42
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 42
>
> *Qemuppc Sato-SDK*
>
>
>
> 47
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
>
>
> 47
>
> *Core Build System*
>
>
>
> 78
>
>
>
> 2
>
>
>
> 72
>
>
>
> 4 (bug 3523,3745, 3642)
>
>
>
> 2
>
> *ADT Toolchain*
>
>
>
> 22
>
>
>
> 0
>
>
>
> 20
>
>
>
> 2 (bug 3338, 3758)
>
>
>
> 0
>
> *HOB*
>
>
>
> 38
>
>
>
> 0
>
>
>
> 37
>
>
>
> 1(3001)
>
>
>
> 0
>
> *Compliance*
>
>
>
> 2
>
>
>
> 2
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
> *Stress*
>
>
>
> 2
>
>
>
> 2
>
>
>
> 0
>
>
>
> 0
>
>
>
> 0
>
> *Total*
>
>
>
> 769
>
>
>
> 6
>
>
>
> 580
>
>
>
> 7
>
>
>
> 178
>
>
> * You can check the detailed test result in attachment for each target.
> ** The failed/blocked case number is listed with failed cases’ bug number.
>
>
> *Commit information
> --------------------------------*
> Location: http://autobuilder.yoctoproject.org/pub/nightly/20130115-2
> Tree/Branch: poky/master
> Commit: 9eb88ceb39b7d0b8ddc6487e61ce8edadef10ec4
>
> *
> Issue Summary
> -----------------------------------*
>
> *Component*
>
>
>
> *Bug Number*
>
>
>
> *Target Milestone*
>
> *System & Core OS*
>
>
>
> *System Usage*
>
>
>
> New! 3769 smart: some packages can not be reinstalled
> New! 3768 smart: --yaml option doesn't work
>
>
>
> 1.4
> 1.4
>
> *Others*
>
>
>
> Bug 3476 Autobuilder failing on fsl-ppc
>
>
>
> 1.4 M2
>
> *Core Build System*
>
>
>
> Bug 3642 gtk-demo fails to run for gtk-directfb image
> Bug 3523 Disk space monitoring gives error: Unknown event
> New!Bug 3745 Bitbake remake/remake-native check fail
> New!Bug 3757 Compile and load kernel fail
> New!Bug 3756 Crosstap script fail
>
>
>
> 1.4
> 1.4
> 1.4
> 1.4 M3
> ----
>
> *ADT Toolchain*
>
>
>
> Bug 3338 iptables-1.4.15: autoreconf run failed on gmae-toolchain
> Bug 3758 Package gtk+-2.0 missing from the userbuilt toolchain
>
>
>
> 1.4 M2
> 1.4 M3
>
> *Compliance*
>
>
>
> Not running
>
>
>
> *Stress*
>
>
>
> Not running
>
>
>
>
>
>
>
> *Verified Bugs
> -----------------------------------
> *1. *[Bug 3643]* <http://bugzilla.pokylinux.org/show_bug.cgi?id=3643>:
> smart config --help error: Invalid command 'config'
> 2. *[Bug 3646]* <http://bugzilla.pokylinux.org/show_bug.cgi?id=3646>:
> non GPLv3 build failure with core-image-basic
>
>
> Br,
>
> Alexandru Palalau
>
> QA contractor Yocto Project
>
More information about the yocto
mailing list