[yocto] Mouse Keyboard don't work at sato Beagle Image

[Raul Rosetto Munoz]

Some one have any suggestion?

I think that is a meta-ti configuration.

I did the same for imx53 using meta-fsl and the mouse and keyboard working
fine!

Thanks


2013/1/19 Raul Rosetto Munoz <munoz0raul at gmail.com>

> Hello All,
>
> I compiled a core-image-sato for a BeagleBone and BeagleBoard.
>
> I'm using all layers at danny version.
>
> My bblayer is like this:
>
>
> BBLAYERS ?= " \
>   /home/prjs/video0001/linux/poky/meta \
>   /home/prjs/video0001/linux/poky/meta-yocto \
>   /home/prjs/video0001/linux/meta-ti \
>   /home/prjs/video0001/linux/meta-openembedded/meta-oe  \
>   "
>
> In beagleboard Im using the DVI conector to see the X, and for beaglebone
> I'm using a DVI cape.
>
> At the two cases the video  working very well but for this two situation,
> when I plug some USB keyboard or USB mouse, I see at serial console that
> linux recognize the device, but in video interface, nothing happen.
>
> I dont know if is necessary create a video target for the USB devices.
>
> Here is a USB mouse log example:
>
>
> [   74.651458] usb 1-1: USB disconnect, device number 2
> [   79.874298] usb 1-1: new low-speed USB device number 3 using musb-hdrc
> [   80.016906] usb 1-1: New USB device found, idVendor=15d9, idProduct=0a33
> [   80.023925] usb 1-1: New USB device strings: Mfr=0, Product=1,
> SerialNumber=0
> [   80.031402] usb 1-1: Product: USB Mouse
> [   80.041412] input: USB Mouse as
> /devices/platform/omap/musb-ti81xx/musb-hdrc.1/usb1/1-1/1-1:1.0/input/input1
> [   80.052642] generic-usb 0003:15D9:0A33.0002: input: USB HID v1.10 Mouse
> [USB Mouse] on usb-musb-hdrc.1-1/input0
>
>
> Thanks
>
> --
> *Raul Rosetto Muñoz*
>



-- 
*Raul Rosetto Muñoz*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130121/0c4629c5/attachment.html>