[yocto] Fwd: Mouse Keyboard don't work at sato Beagle Image

[Raul Rosetto Munoz]

Hello All,

I compiled a core-image-sato for a BeagleBone and BeagleBoard.

I'm using all layers at danny version.

My bblayer is like this:


BBLAYERS ?= " \
  /home/prjs/video0001/linux/poky/meta \
  /home/prjs/video0001/linux/poky/meta-yocto \
  /home/prjs/video0001/linux/meta-ti \
  /home/prjs/video0001/linux/meta-openembedded/meta-oe  \
  "

In beagleboard Im using the DVI conector to see the X, and for beaglebone
I'm using a DVI cape.

At the two cases the video  working very well but for this two situation,
when I plug some USB keyboard or USB mouse, I see at serial console that
linux recognize the device, but in video interface, nothing happen.

I dont know if is necessary create a video target for the USB devices.

Here is a USB mouse log example:


[   74.651458] usb 1-1: USB disconnect, device number 2
[   79.874298] usb 1-1: new low-speed USB device number 3 using musb-hdrc
[   80.016906] usb 1-1: New USB device found, idVendor=15d9, idProduct=0a33
[   80.023925] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[   80.031402] usb 1-1: Product: USB Mouse
[   80.041412] input: USB Mouse as
/devices/platform/omap/musb-ti81xx/musb-hdrc.1/usb1/1-1/1-1:1.0/input/input1
[   80.052642] generic-usb 0003:15D9:0A33.0002: input: USB HID v1.10 Mouse
[USB Mouse] on usb-musb-hdrc.1-1/input0


Thanks

-- 
*Raul Rosetto Muñoz*



-- 
*Raul Rosetto Muñoz*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20130119/9f9c9326/attachment.html>