[yocto] Eclipse Plugin

[Björn Arnelid]

2013-01-18 13:24, Flavio Castro Alves Filho skrev:
> Hello,
>
> I'm facing similar issue (in fact, Raul and I are working together on
> this deploy).
>
> I'll describe the steps that we followed. Our system is Ubuntu 12.04
> LTS and our Eclipse version is Juno.
>
> 1) We build core-image-minimal using poky 1.3 (danny), meta-ti,
> meta-openembedded/meta-oe
>
> 2) We build toolchain from the build system, using meta-ide-support
>
> 3) We downloaded Eclipse classic from Eclipse's website
>
> 4) We installed the Eclipse's components, according to Yocto dev
> manual instructions
>
> 5) We installed Yocto ADT plugin from the repository (version 1.3)
>
> We extracted the generated root filesystem in another directory, in
> order to properly configure the Eclipse Yocto plugin.
>
> For now, installation worked fine. The problem occurs when we try to
> build the hello world application.
>
> We followed the steps from the Yocto dev manual.
>
> Before starting the build, I lanched the reconfigure option. After,
> when started to build, the error message indicates 'no make target'.
>
> Looking at the files, I could see that autogen.sh was executed, but
> the configure script don't. I believe that there is some isse where
> the IDE is not executing the configure script.
>
> Do you have any clue about how to solve this issue?
>
> Best regards,
>
> Flavio
>
>
> 2013/1/17 Zhang, Jessica <jessica.zhang at intel.com>:
>> Hi Raul,
>>
>>
>>
>> Before we can help you debug your issue, can you provide more info regarding
>> to:
>>
>>
>>
>> 1.       How did you setup your cross toolchain? ADT installer or toolchain
>> tarball (your build if so, how did you build it.  If not, which one did you
>> download?)
>>
>> 2.       And also, please provide more info what’s your toolchain setup in
>> Eclipse, specifically the Yocto Project ADT preference config under Window?
>>
>> Thanks,
>>
>> Jessica
>>
>>
>>
>> From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org]
>> On Behalf Of Raul Rosetto Munoz
>> Sent: Thursday, January 17, 2013 4:10 AM
>> To: yocto at yoctoproject.org
>> Subject: [yocto] Eclipse Plugin
>>
>>
>>
>> Hello All,
>>
>> I followed the ADT manual to create a eclipse environment.
>>
>>
>>
>> After create a default Hello World Yocto project I get some compile errors.
>>
>>
>>
>> At file config.log I saw some errors lines:
>>
>>
>>
>>
>>
>> configure:2861: checking for arm-poky-linux-gnueabi-gcc
>>
>> configure:2888: result: arm-poky-linux-gnueabi-gcc  -march=armv5te  -marm
>> -mthumb-interwork  -mtune=arm926ej-s
>> --sysroot=/home/prjs/compsis0001/philinux/arm
>>
>> configure:3157: checking for C compiler version
>>
>> configure:3166: arm-poky-linux-gnueabi-gcc  -march=armv5te  -marm
>> -mthumb-interwork  -mtune=arm926ej-s
>> --sysroot=/home/prjs/compsis0001/philinux/arm --version >&5
>>
>> arm-poky-linux-gnueabi-gcc (GCC) 4.7.2
>>
>> Copyright (C) 2012 Free Software Foundation, Inc.
>>
>> This is free software; see the source for copying conditions.  There is NO
>>
>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>
>>
>>
>> configure:3177: $? = 0
>>
>> configure:3166: arm-poky-linux-gnueabi-gcc  -march=armv5te  -marm
>> -mthumb-interwork  -mtune=arm926ej-s
>> --sysroot=/home/prjs/compsis0001/philinux/arm -v >&5
>>
>> Using built-in specs.
>>
>> COLLECT_GCC=arm-poky-linux-gnueabi-gcc
>>
>> COLLECT_LTO_WRAPPER=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/lto-wrapper
>>
>> Target: arm-poky-linux-gnueabi
>>
>> Configured with:
>> /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/work-shared/gcc-4.7.2-r13/gcc-4.7.2/configure
>> --build=x86_64-linux --host=i686-pokysdk-linux
>> --target=arm-poky-linux-gnueabi
>> --prefix=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr
>> --exec_prefix=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr
>> --bindir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/bin/armv5te-poky-linux-gnueabi
>> --sbindir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/bin/armv5te-poky-linux-gnueabi
>> --libexecdir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi
>> --datadir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/share
>> --sysconfdir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/etc
>> --sharedstatedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/com
>> --localstatedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/var
>> --libdir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/lib/armv5te-poky-linux-gnueabi
>> --includedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/include
>> --oldincludedir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/include
>> --infodir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/share/info
>> --mandir=/opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/share/man
>> --disable-silent-rules --disable-dependency-tracking
>> --with-libtool-sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/i686-nativesdk-pokysdk-linux
>> --with-gnu-ld --enable-shared --enable-languages=c,c++
>> --enable-threads=posix --disable-multilib --enable-c99 --enable-long-long
>> --enable-symvers=gnu --enable-libstdcxx-pch
>> --program-prefix=arm-poky-linux-gnueabi- --without-local-prefix
>> --enable-target-optspace --enable-lto --enable-libssp --disable-bootstrap
>> --disable-libgomp --disable-libmudflap --with-system-zlib
>> --with-linker-hash-style=gnu --with-ppl=no --with-cloog=no
>> --enable-checking=release --enable-cheaders=c_global --with-float=soft
>> --with-gxx-include-dir=/opt/poky/1.3/sysroots/armv5te-poky-linux-gnueabi/usr/include/c++
>> --with-build-time-tools=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/x86_64-linux/usr/arm-poky-linux-gnueabi/bin
>> --with-sysroot=/opt/poky/1.3/sysroots/armv5te-poky-linux-gnueabi
>> --with-build-sysroot=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/qemuarm
>> --disable-libunwind-exceptions --disable-libssp --disable-libgomp
>> --disable-libmudflap
>> --with-mpfr=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/i686-nativesdk-pokysdk-linux
>> --with-mpc=/srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-arm/build/build/tmp/sysroots/i686-nativesdk-pokysdk-linux
>> --enable-nls
>>
>> Thread model: posix
>>
>> gcc version 4.7.2 (GCC)
>>
>> configure:3177: $? = 0
>>
>> configure:3166: arm-poky-linux-gnueabi-gcc  -march=armv5te  -marm
>> -mthumb-interwork  -mtune=arm926ej-s
>> --sysroot=/home/prjs/compsis0001/philinux/arm -V >&5
>>
>> arm-poky-linux-gnueabi-gcc: error: unrecognized command line option '-V'
>>
>> arm-poky-linux-gnueabi-gcc: fatal error: no input files
>>
>> compilation terminated.
>>
>> configure:3177: $? = 1
>>
>> configure:3166: arm-poky-linux-gnueabi-gcc  -march=armv5te  -marm
>> -mthumb-interwork  -mtune=arm926ej-s
>> --sysroot=/home/prjs/compsis0001/philinux/arm -qversion >&5
>>
>> arm-poky-linux-gnueabi-gcc: error: unrecognized command line option
>> '-qversion'
>>
>> arm-poky-linux-gnueabi-gcc: fatal error: no input files
>>
>> compilation terminated.
>>
>> configure:3177: $? = 1
>>
>> configure:3197: checking whether the C compiler works
>>
>> configure:3219: arm-poky-linux-gnueabi-gcc  -march=armv5te  -marm
>> -mthumb-interwork  -mtune=arm926ej-s
>> --sysroot=/home/prjs/compsis0001/philinux/arm  -g -O0
>> --sysroot=/opt/poky/1.3  --sysroot=/opt/poky/1.3  --sysroot=/opt/poky/1.3
>> conftest.c  >&5
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find crt1.o: No such file or directory
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find crti.o: No such file or directory
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find crtbegin.o: No such file or directory
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find -lgcc
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find -lgcc_s
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find -lc
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find -lgcc
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find -lgcc_s
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find crtend.o: No such file or directory
>>
>> /opt/poky/1.3/sysroots/i686-pokysdk-linux/usr/libexec/armv5te-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.7.2/ld:
>> cannot find crtn.o: No such file or directory
>>
>> collect2: error: ld returned 1 exit status
>>
>> configure:3223: $? = 1
>>
>> configure:3261: result: no
>>
>> configure: failed program was:
>>
>> | /* confdefs.h */
>>
>> | #define PACKAGE_NAME "teste"
>>
>> | #define PACKAGE_TARNAME "teste"
>>
>> | #define PACKAGE_VERSION "0.1.0"
>>
>> | #define PACKAGE_STRING "teste 0.1.0"
>>
>> | #define PACKAGE_BUGREPORT ""
>>
>> | #define PACKAGE_URL ""
>>
>> | #define PACKAGE "teste"
>>
>> | #define VERSION "0.1.0"
>>
>> | /* end confdefs.h.  */
>>
>> |
>>
>> | int
>>
>> | main ()
>>
>> | {
>>
>> |
>>
>> |   ;
>>
>> |   return 0;
>>
>> | }
>>
>> configure:3266: error: in `/home/prjs/compsis0001/workspace/teste':
>>
>> configure:3268: error: C compiler cannot create executables
>>
>> See `config.log' for more details
>>
>>
>>
>> ## ---------------- ##
>>
>> ## Cache variables. ##
>>
>> ## ---------------- ##
>>
>> ...
>>
>> ...
>>
>> ...
>>
>> ## ----------------- ##
>>
>> ## Output variables. ##
>>
>> ## ----------------- ##
>>
>> ...
>>
>> ...
>>
>> ...
>>
>> /* confdefs.h */
>>
>> #define PACKAGE_NAME "teste"
>>
>> #define PACKAGE_TARNAME "teste"
>>
>> #define PACKAGE_VERSION "0.1.0"
>>
>> #define PACKAGE_STRING "teste 0.1.0"
>>
>> #define PACKAGE_BUGREPORT ""
>>
>> #define PACKAGE_URL ""
>>
>> #define PACKAGE "teste"
>>
>> #define VERSION "0.1.0"
>>
>>
>>
>> configure: exit 77
>>
>>
>>
>>
>>
>> Some One can Help me?
>>
>>
>>
>> Thanks
>>
>>
>>
>> --
>> Raul Rosetto Muñoz
>>
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
>
Don't you need to develop against a -sdk image?
Try building a debug image, extract the file-system and point to that 
when developing.

regards,
Björn


-- 
Björn Arnelid | Software Engineer
M: +46-70-971 4459  | björn.arnelid at xdin.com
XDIN AB | Knarrarnäsgatan 7 | SE-164 40 Kista | xdin.com

Xdin develop and deliver expertise through committed engineering and IT consultants.