[yocto] poky-tiny breaks at ncurses and perl (Dylan 9.0.1)
Tom Zanussi
tom.zanussi at intel.com
Mon Dec 9 14:11:27 PST 2013
On Mon, 2013-12-09 at 16:45 -0500, r10kindsofpeople wrote:
> On Mon, Dec 9, 2013 at 4:24 PM, Saul Wold <sgw at linux.intel.com> wrote:
> On 12/09/2013 11:51 AM, r10kindsofpeople wrote:
> On Fri, Dec 6, 2013 at 3:08 PM, Tom Zanussi
> <tom.zanussi at intel.com
> <mailto:tom.zanussi at intel.com>> wrote:
>
> On Fri, 2013-12-06 at 14:08 -0500,
> r10kindsofpeople wrote:
> > After some success building my system
> (crownbay), I'm now trying to
> > optimize boot time, so I read up on poky-tiny,
> created a new
> layer and
> > am trying to build. I think I've pulled most
> of my system
> changes out
> > so that I can at least bitbake
> core-image-minimal, but I'm still not
> > able to get past ncurses config and perl.
> (ncurses reports autoconf
> > errors in widec, perl has undefined references
> to gcvt, I'm also
> > getting complaints about multiple providers for
> the kernel, etc.)
> >
> >
> > Is poky-tiny still active and tested? What are
> the odds of this
> being
> > resolved in Dora versus the odds of running
> into other migration
> > issues?
> >
>
> I haven't tried poky-tiny with dylan, but I have
> with dora and didn't
> run into any build problems - the build errors
> you're running into
> aren't things I've seen either.
>
> So maybe you can try with dora and see what
> happens - if you still run
> into problems, please provide some more details on
> your setup.
>
>
> Thanks, Tom...using Dora, I was able to get the basic
> system to build.
>
> Adding some features (dhcp-server, for instance) still
> breaks the build,
> but I suspect that's just a consequence of -tiny doing
> it's thing.
>
> John, that's probably correct, the tiny configuration uses
> uclibc and if you see bug number 5431
> (https://bugzilla.yoctoproject.org/show_bug.cgi?id=5431),
> there are a number of recipes that will not build correctly
> with the full uclibc, but that was with a full uclibc, where
> as the tiny configuration cuts down ulibc to just support the
> bare minimum.
>
> Hope that helps with your efforts.
>
> Sau!
>
>
> Thanks, Saul, I'll take a look.
>
>
> A "FWIW" for any and all...to get qemu to work with the tiny image, I
> had to do a menuconfig for busybox and add "setsid" and "cttyhack",
> otherwise I was getting "not found" and "error 127" loops on startup.
>
>
>
> (hints on how to do this without menuconfig are welcome...I tried
> creating my own recipe and adding package ${PN}-setsid or including my
> own (edited) defconfig, but neither seemed to work.
I also ran into that problem and sent an initial fix for it:
https://lists.yoctoproject.org/pipermail/poky/2013-November/009378.html
I still need to 'fix' the fix but it works in any case..
Tom
> John
>
>
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
>
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
More information about the yocto
mailing list