[yocto] build failure on current

Evade Flow evadeflow at gmail.com
Thu Sep 27 14:55:45 PDT 2012 

Fair enough. And I should mention that the error I reported occurs on
Ubuntu 10.04. It's not like I wasn't warned. :-}

  WARNING: Host distribution "Ubuntu 10.04 LTS" has not been validated
  with this version of the build system; you may possibly experience
  unexpected failures. It is recommended that you use a tested
  distribution.

(Other than this oddity with the perl package, things seem to work fine.)


On Thu, Sep 27, 2012 at 3:56 PM, Rifenbark, Scott M
<scott.m.rifenbark at intel.com> wrote:
> I was told that I hit the server at a busy time thus causing the fetch to fail.  I just re-ran it and ran error free.  I was also told this was a rare occurrence but it does happen.
>
> Scott
>
> -----Original Message-----
> From: Evade Flow [mailto:evadeflow at gmail.com]
> Sent: Thursday, September 27, 2012 12:42 PM
> To: Rifenbark, Scott M
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] build failure on current
>
> I'm new to Yocto, but I've seen similar errors that seem to be due to
> differences in the version of tar on the build server.  Everything's
> fine on this machine:
>
> good% tar --version
> tar (GNU tar) 1.26
>
> but I get CRC errors sometimes on this one:
>
> bad% otp-mmes-build% tar --version
> tar (GNU tar) 1.22
>
> The specific recipe I was having problems with was, I think,
> perl-native. I couldn't untar/uncompress the perl archive in
> build/downloads with tar 1.22, but it worked fine with tar 1.26. (I
> don't have a solution, sorry. Around the same time I noticed this, I
> found out that the image I was building was supposed to be built on
> the denzil branch, so I just switched over to denzil and the problem
> went away.)
>
>
> On Thu, Sep 27, 2012 at 3:20 PM, Rifenbark, Scott M
> <scott.m.rifenbark at intel.com> wrote:
>> I am running through the build example for the QS and  hit a failure when
>> trying to access git://git.yoctoproject.org/libowl;protocol=git.  I started
>> with the tarball here:  http://autobuilder.yoctoproject.org/nightly/CURRENT
>>
>>
>>
>
>
>> Full transcript.
>>
>>
>>
>> srifenbark at scottrif-desktop:~$ cd
>> poky-0b09e50810162a07ef0aecee91ee32b4a36334a3
>> srifenbark at scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3$
>> source oe-init-build-env
>> You had no conf/local.conf file. This configuration file has therefore been
>> created for you with some default values. You may wish to edit it to use a
>> different MACHINE (target hardware) or enable parallel build options to take
>> advantage of multiple cores for example. See the file for more information
>> as
>> common configuration options are commented.
>>
>> The Yocto Project has extensive documentation about OE including a reference
>> manual
>> which can be found at:
>>     http://yoctoproject.org/documentation
>>
>> For more information about OpenEmbedded see their website:
>>     http://www.openembedded.org/
>>
>> You had no conf/bblayers.conf file. The configuration file has been created
>> for
>> you with some default values. To add additional metadata layers into your
>> configuration please add entries to this file.
>>
>> The Yocto Project has extensive documentation about OE including a reference
>> manual
>> which can be found at:
>>     http://yoctoproject.org/documentation
>>
>> For more information about OpenEmbedded see their website:
>>     http://www.openembedded.org/
>>
>>
>>
>> ### Shell environment set up for builds. ###
>>
>> You can now run 'bitbake <target>'
>>
>> Common targets are:
>>     core-image-minimal
>>     core-image-sato
>>     meta-toolchain
>>     meta-toolchain-sdk
>>     adt-installer
>>     meta-ide-support
>>
>> You can also run generated qemu images with a command like 'runqemu qemux86'
>>
>> srifenbark at scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build$
>> bitbake -k core-image-sato
>> Pseudo is not present but is required, building this first before the main
>> build
>> Parsing recipes: 100% |#########################################| Time:
>> 00:00:48
>> Parsing of 825 .bb files complete (0 cached, 825 parsed). 1129 targets, 22
>> skipped, 0 masked, 0 errors.
>>
>> Build Configuration:
>> BB_VERSION        = "1.15.3"
>> TARGET_ARCH       = "i586"
>> TARGET_OS         = "linux"
>> MACHINE           = "qemux86"
>> DISTRO            = "poky"
>> DISTRO_VERSION    = "1.2+snapshot-20120927"
>> TUNE_FEATURES     = "m32 i586"
>> TARGET_FPU        = ""
>> meta
>> meta-yocto
>> meta-yocto-bsp    = "<unknown>:<unknown>"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing SetScene Tasks
>> NOTE: Executing RunQueue Tasks
>> NOTE: Tasks Summary: Attempted 63 tasks of which 0 didn't need to be rerun
>> and all succeeded.
>> Loading cache: 100% |###########################################| ETA:
>> 00:00:00
>> Loaded 1130 entries from dependency cache.
>>
>> Build Configuration:
>> BB_VERSION        = "1.15.3"
>> TARGET_ARCH       = "i586"
>> TARGET_OS         = "linux"
>> MACHINE           = "qemux86"
>> DISTRO            = "poky"
>> DISTRO_VERSION    = "1.2+snapshot-20120927"
>> TUNE_FEATURES     = "m32 i586"
>> TARGET_FPU        = ""
>> meta
>> meta-yocto
>> meta-yocto-bsp    = "<unknown>:<unknown>"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing SetScene Tasks
>> NOTE: Executing RunQueue Tasks
>> NOTE: validating kernel configuration
>>
>> WARNING: The recipe is trying to install files into a shared area when those
>> files already exist. Those files are:
>>
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/x86_64-linux/usr/share/sgml/openjade-1.3.2/catalog
>> WARNING: The recipe is trying to install files into a shared area when those
>> files already exist. Those files are:
>>
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/include/python2.7/pyconfig.h
>>
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/libpython2.7.so
>>
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/libpython2.7.so.1.0
>>
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/python2.7/config/Makefile
>> WARNING: Failed to fetch URL git://git.yoctoproject.org/libowl;protocol=git,
>> attempting MIRRORS if available
>> ERROR: Fetcher failure: Fetch command failed with exit code 2, output:
>>
>> gzip: stdin: invalid compressed data--crc error
>>
>> gzip: stdin: invalid compressed data--length error
>> tar: Skipping to next header
>> tar: Child returned status 1
>> tar: Error is not recoverable: exiting now
>>
>> ERROR: Function failed: Fetcher failure for URL:
>> 'git://git.yoctoproject.org/libowl;protocol=git'. Unable to fetch URL from
>> any source.
>> ERROR: Logfile of failure stored in:
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/work/i586-poky-linux/libowl-0.1+git1+6ebc8ac8f8575278dd40a535cadefa26374e44b1-r0/temp/log.do_fetch.1973
>> ERROR: Task 2306
>> (/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/meta/recipes-sato/libowl/libowl_git.bb,
>> do_fetch) failed with exit code '1'
>> NOTE: Tasks Summary: Attempted 5560 tasks of which 339 didn't need to be
>> rerun and 1 failed.
>>
>> Summary: 1 task failed:
>>
>> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/meta/recipes-sato/libowl/libowl_git.bb,
>> do_fetch
>> Summary: There were 3 WARNING messages shown.
>> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
>> srifenbark at scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build$
>>
>>
>>
>>
>>
>> Scott Rifenbark
>>
>> Intel Corporation
>>
>> Yocto Project Documentation
>>
>> 503.712.2702
>>
>> 503.341.0418 (cell)
>>
>>
>>
>>
>> _______________________________________________
>> yocto mailing list
>> yocto at yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>>

More information about the yocto mailing list