[yocto] build failure on current
Evade Flow
evadeflow at gmail.com
Thu Sep 27 12:42:29 PDT 2012
I'm new to Yocto, but I've seen similar errors that seem to be due to
differences in the version of tar on the build server. Everything's
fine on this machine:
good% tar --version
tar (GNU tar) 1.26
but I get CRC errors sometimes on this one:
bad% otp-mmes-build% tar --version
tar (GNU tar) 1.22
The specific recipe I was having problems with was, I think,
perl-native. I couldn't untar/uncompress the perl archive in
build/downloads with tar 1.22, but it worked fine with tar 1.26. (I
don't have a solution, sorry. Around the same time I noticed this, I
found out that the image I was building was supposed to be built on
the denzil branch, so I just switched over to denzil and the problem
went away.)
On Thu, Sep 27, 2012 at 3:20 PM, Rifenbark, Scott M
<scott.m.rifenbark at intel.com> wrote:
> I am running through the build example for the QS and hit a failure when
> trying to access git://git.yoctoproject.org/libowl;protocol=git. I started
> with the tarball here: http://autobuilder.yoctoproject.org/nightly/CURRENT
>
>
>
> Full transcript.
>
>
>
> srifenbark at scottrif-desktop:~$ cd
> poky-0b09e50810162a07ef0aecee91ee32b4a36334a3
> srifenbark at scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3$
> source oe-init-build-env
> You had no conf/local.conf file. This configuration file has therefore been
> created for you with some default values. You may wish to edit it to use a
> different MACHINE (target hardware) or enable parallel build options to take
> advantage of multiple cores for example. See the file for more information
> as
> common configuration options are commented.
>
> The Yocto Project has extensive documentation about OE including a reference
> manual
> which can be found at:
> http://yoctoproject.org/documentation
>
> For more information about OpenEmbedded see their website:
> http://www.openembedded.org/
>
> You had no conf/bblayers.conf file. The configuration file has been created
> for
> you with some default values. To add additional metadata layers into your
> configuration please add entries to this file.
>
> The Yocto Project has extensive documentation about OE including a reference
> manual
> which can be found at:
> http://yoctoproject.org/documentation
>
> For more information about OpenEmbedded see their website:
> http://www.openembedded.org/
>
>
>
> ### Shell environment set up for builds. ###
>
> You can now run 'bitbake <target>'
>
> Common targets are:
> core-image-minimal
> core-image-sato
> meta-toolchain
> meta-toolchain-sdk
> adt-installer
> meta-ide-support
>
> You can also run generated qemu images with a command like 'runqemu qemux86'
>
> srifenbark at scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build$
> bitbake -k core-image-sato
> Pseudo is not present but is required, building this first before the main
> build
> Parsing recipes: 100% |#########################################| Time:
> 00:00:48
> Parsing of 825 .bb files complete (0 cached, 825 parsed). 1129 targets, 22
> skipped, 0 masked, 0 errors.
>
> Build Configuration:
> BB_VERSION = "1.15.3"
> TARGET_ARCH = "i586"
> TARGET_OS = "linux"
> MACHINE = "qemux86"
> DISTRO = "poky"
> DISTRO_VERSION = "1.2+snapshot-20120927"
> TUNE_FEATURES = "m32 i586"
> TARGET_FPU = ""
> meta
> meta-yocto
> meta-yocto-bsp = "<unknown>:<unknown>"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> NOTE: Tasks Summary: Attempted 63 tasks of which 0 didn't need to be rerun
> and all succeeded.
> Loading cache: 100% |###########################################| ETA:
> 00:00:00
> Loaded 1130 entries from dependency cache.
>
> Build Configuration:
> BB_VERSION = "1.15.3"
> TARGET_ARCH = "i586"
> TARGET_OS = "linux"
> MACHINE = "qemux86"
> DISTRO = "poky"
> DISTRO_VERSION = "1.2+snapshot-20120927"
> TUNE_FEATURES = "m32 i586"
> TARGET_FPU = ""
> meta
> meta-yocto
> meta-yocto-bsp = "<unknown>:<unknown>"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> NOTE: validating kernel configuration
>
> WARNING: The recipe is trying to install files into a shared area when those
> files already exist. Those files are:
>
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/x86_64-linux/usr/share/sgml/openjade-1.3.2/catalog
> WARNING: The recipe is trying to install files into a shared area when those
> files already exist. Those files are:
>
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/include/python2.7/pyconfig.h
>
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/libpython2.7.so
>
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/libpython2.7.so.1.0
>
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/sysroots/qemux86/usr/lib/python2.7/config/Makefile
> WARNING: Failed to fetch URL git://git.yoctoproject.org/libowl;protocol=git,
> attempting MIRRORS if available
> ERROR: Fetcher failure: Fetch command failed with exit code 2, output:
>
> gzip: stdin: invalid compressed data--crc error
>
> gzip: stdin: invalid compressed data--length error
> tar: Skipping to next header
> tar: Child returned status 1
> tar: Error is not recoverable: exiting now
>
> ERROR: Function failed: Fetcher failure for URL:
> 'git://git.yoctoproject.org/libowl;protocol=git'. Unable to fetch URL from
> any source.
> ERROR: Logfile of failure stored in:
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build/tmp/work/i586-poky-linux/libowl-0.1+git1+6ebc8ac8f8575278dd40a535cadefa26374e44b1-r0/temp/log.do_fetch.1973
> ERROR: Task 2306
> (/home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/meta/recipes-sato/libowl/libowl_git.bb,
> do_fetch) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 5560 tasks of which 339 didn't need to be
> rerun and 1 failed.
>
> Summary: 1 task failed:
>
> /home/scottrif/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/meta/recipes-sato/libowl/libowl_git.bb,
> do_fetch
> Summary: There were 3 WARNING messages shown.
> Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
> srifenbark at scottrif-desktop:~/poky-0b09e50810162a07ef0aecee91ee32b4a36334a3/build$
>
>
>
>
>
> Scott Rifenbark
>
> Intel Corporation
>
> Yocto Project Documentation
>
> 503.712.2702
>
> 503.341.0418 (cell)
>
>
>
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
More information about the yocto
mailing list