[yocto] BB_NO_NETWORK and own-mirrors not working with meta-systemd
Evade Flow
evadeflow at gmail.com
Thu Sep 20 06:30:19 PDT 2012
> Try doing 'bitbake kmod -c cleansstate;bitbake kmod' - does that still fail?
Thanks for the suggestion. I get this when I try to run 'bitbake kmod -c
cleanslate':
ERROR: Task do_cleanslate does not exist for target kmod
Because I don't know any better, I tried this instead:
% bitbake kmod clean
% bitbake kmod
but it yielded the same result:
NOTE: package kmod-7-r0: task do_fetch: Started
ERROR: Function failed: Network access disabled through BB_NO_NETWORK
but access rquested with command git ls-remote
git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git
8885ced062131214448 (for url None)
I guess I'll try the BFI approach of restarting the build from scratch next.
`:-o. Incidentally, searching the OpenEmbedded manual for 'cleanslate' turns
up no hits. Is this some kind of 'secret' command? Where can I learn about
other such commands?
On Wed, Sep 19, 2012 at 8:13 PM, Gary Thomas <gary at mlbassoc.com> wrote:
> On 2012-09-19 16:30, Evade Flow wrote:
>>>
>>> I'm just trying to build the thing. :-) I'll try converting the tag
>>> name into a commit hash and see if that helps, thanks a lot...
>>
>>
>> ::SIGH:: I changed the SRC_URI var in kmod.inc from this:
>>
>> SRC_URI =
>> "git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git;protocol=git;tag=v${PV}"
>>
>> to this:
>>
>> SRC_URI =
>> "git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git;protocol=git"
>> SRCREV="8885ced062131214448fae056ef453f094303805"
>>
>> This is *still* trying to access the network:
>
>
> Try doing 'bitbake kmod -c cleansstate;bitbake kmod' - does that still fail?
>
>
>> NOTE: package kmod-7-r0: task do_fetch: Started
>> ERROR: Function failed: Network access disabled through BB_NO_NETWORK
>> but access rquested with command git ls-remote
>> git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git
>> 8885ced062131214448 (for url None)
>> ERROR: Logfile of failure stored in:
>>
>> /home/dwolfe/projects/poky-git/build/tmp-eglibc-eglibc/work/armv7a-vfp-neon-oe-linux-gnueabi/kmod-7-r0/temp/log.do_fetch.11168
>> Log data follows:
>> | ERROR: Function failed: Network access disabled through
>> BB_NO_NETWORK but access rquested with command git ls-remote
>> git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git
>> 8885ced062131214448 (for url None)
>> NOTE: package kmod-7-r0: task do_fetch: Failed
>> NOTE: package acl-2.2.51-r3: task do_fetch: Started
>> NOTE: package acl-2.2.51-r3: task do_fetch: Succeeded
>> ERROR: Task 1374
>>
>> (/home/dwolfe/projects/poky-git/meta-systemd/recipes-kernel/kmod/kmod_7.bb,
>> do_fetch) failed with exit code '1'
>> NOTE: Tasks Summary: Attempted 699 tasks of which 697 didn't need to
>> be rerun and 1 failed.
>>
>> Summary: 1 task failed:
>>
>> /home/dwolfe/projects/poky-git/meta-systemd/recipes-kernel/kmod/kmod_7.bb,
>> do_fetch
>> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>> bitbake discovery-image 16.51s user 2.65s system 112% cpu 17.031 total
>>
>>
>> Why is poky/bitbake/whatever running 'git ls-remote'? This seems like a
>> bug....
>>
>>
>> On Wed, Sep 19, 2012 at 1:33 PM, Evade Flow <evadeflow at gmail.com> wrote:
>>>
>>> I'm not sure how to answer your questions, unfortunately, this is all
>>> quite new to me. I'm not the maintainer of said layer, and don't know
>>> anything at all yet about 'layer etiquette'. There does seem to be a
>>> README.md file in meta-systemd, though:
>>>
>>> -
>>> http://git.yoctoproject.org/cgit/cgit.cgi/meta-systemd/tree/README.md
>>>
>>> I'm just trying to build the thing. :-) I'll try converting the tag
>>> name into a commit hash and see if that helps, thanks a lot...
>>>
>>>
>>> On Wed, Sep 19, 2012 at 1:23 PM, Gary Thomas <gary at mlbassoc.com> wrote:
>>>>
>>>> On 2012-09-19 11:15, Evade Flow wrote:
>>>>>>
>>>>>>
>>>>>> Where did you get that meta-systemd layer?
>>>>>
>>>>>
>>>>>
>>>>>> From here:
>>>>>
>>>>>
>>>>>
>>>>> - http://git.yoctoproject.org/cgit/cgit.cgi/meta-systemd/
>>>>
>>>>
>>>>
>>>> Why are there conflicting meta-systemd layers (and pointers thereto)??
>>>> This layer in git.yoctoproject.org doesn't seem even "legal" - where is
>>>> the README that is expected with every layer? Without it, I don't have
>>>> enough info to be able to report problems like yours...
>>>>
>>>> The reason your build fails with BB_NO_NETWORK is that the kmod_7.bb
>>>> recipe refers to a git tag, not a specific revision, which cannot be
>>>> resolved without using the network.
>>>>
>>>>
>>>>>
>>>>>
>>>>> On Wed, Sep 19, 2012 at 12:50 PM, Gary Thomas <gary at mlbassoc.com>
>>>>> wrote:
>>>>>>
>>>>>>
>>>>>> On 2012-09-19 10:34, Evade Flow wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Trying to build the meta-ivi discovery-image behind a firewall is
>>>>>>> proving to be quite a challenge. I tried modifying my conf/local.conf
>>>>>>> file as follows:
>>>>>>>
>>>>>>> CONNECTIVITY_CHECK_URIS=""
>>>>>>> BB_GENERATE_MIRROR_TARBALLS = "1"
>>>>>>> SOURCE_MIRROR_URL ?= "file:///home/evadeflow/projects/poky-mirror/"
>>>>>>> INHERIT += "own-mirrors"
>>>>>>>
>>>>>>> and then ran:
>>>>>>>
>>>>>>> % bitbake discovery-image
>>>>>>>
>>>>>>> in a VM on my home laptop over the weekend. (I'm trying to build
>>>>>>> using
>>>>>>> the meta-ivi layer, per the instructions in its README.) After
>>>>>>> grinding
>>>>>>> and churning for some 60+ hours, it finally succeeded, leaving 11 GB
>>>>>>> of
>>>>>>> 'stuff' in my poky-mirror folder.
>>>>>>>
>>>>>>> Then, I copied the poky-mirror folder to a firewalled machine at work
>>>>>>> and added:
>>>>>>>
>>>>>>> BB_NO_NETWORK="1"
>>>>>>>
>>>>>>> to local.conf. When I tried to bitbake discovery-image on this
>>>>>>> machine,
>>>>>>> I got the following error:
>>>>>>>
>>>>>>>
>>>>>>> NOTE: Running task 697 of 3568 (ID: 1374,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /home/evadeflow/projects/poky-git/meta-systemd/recipes-kernel/kmod/kmod_7.bb,
>>>>>>> do_fetch)
>>>>>>> NOTE: package kmod-7-r0: task do_fetch: Started
>>>>>>> ERROR: Function failed: Network access disabled through BB_NO_NETWORK
>>>>>>> but access rquested with command git ls-remote
>>>>>>> git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git v7 (for url
>>>>>>> None)
>>>>>>> ERROR: Logfile of failure stored in:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /home/evadeflow/projects/poky-git/build/tmp-eglibc-eglibc/work/armv7a-vfp-neon-oe-linux-gnueabi/kmod-7-r0/temp/log.do_fetch.29423
>>>>>>> Log data follows:
>>>>>>> | ERROR: Function failed: Network access disabled through
>>>>>>> BB_NO_NETWORK but access rquested with command git ls-remote
>>>>>>> git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git v7 (for url
>>>>>>> None)
>>>>>>> NOTE: package kmod-7-r0: task do_fetch: Failed
>>>>>>> ERROR: Task 1374
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> (/home/evadeflow/projects/poky-git/meta-systemd/recipes-kernel/kmod/kmod_7.bb,
>>>>>>> do_fetch) failed with exit code '1'
>>>>>>> Waiting for 1 running tasks to finish:
>>>>>>> 0: libusb1-1.0.8-r4 do_compile (pid 29232)
>>>>>>> NOTE: package libusb1-1.0.8-r4: task do_compile: Succeeded
>>>>>>> NOTE: Tasks Summary: Attempted 697 tasks of which 105 didn't need to
>>>>>>> be rerun and 1 failed.
>>>>>>>
>>>>>>> Summary: 1 task failed:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /home/evadeflow/projects/poky-git/meta-systemd/recipes-kernel/kmod/kmod_7.bb,
>>>>>>> do_fetch
>>>>>>> Summary: There was 1 ERROR message shown, returning a non-zero exit
>>>>>>> code.
>>>>>>> bitbake discovery-image 5338.15s user 995.52s system 187% cpu
>>>>>>> 56:12.92
>>>>>>> total
>>>>>>>
>>>>>>> [NOTE: I'm on poky denzil at 65ffa73, meta-ivi denzil at e068388, and
>>>>>>> meta-systemd denzil at 6a358e9. Also, that typo in the output
>>>>>>> isn't mine, i.e., 'rquested' should be 'requested'.]
>>>>>>>
>>>>>>> Can anyone explain what's going on here? If I look in the poky-mirror
>>>>>>> folder for kmod-related stuff, I see:
>>>>>>>
>>>>>>> % ls /home/evadeflow/projects/poky-mirror/*kmod*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /home/evadeflow/projects/poky-mirror/git2_git.kernel.org.pub.scm.utils.kernel.kmod.kmod.git.tar.gz
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> /home/evadeflow/projects/poky-mirror/git2_git.profusion.mobi.kmod.git.tar.gz
>>>>>>>
>>>>>>> I *think* this is what needs to be downloaded for this recipe(?) Why
>>>>>>> is
>>>>>>> `git ls-remote` being run at all? I'm not sure whether this is the
>>>>>>> fault
>>>>>>> of poky/oe-core, or of the meta-systemd layer. I'd just really wish
>>>>>>> it
>>>>>>> worked. `:-} Any advice?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Where did you get that meta-systemd layer? I can't find your
>>>>>> recipe nor that revision (denzil at 6a358e9) in the published version
>>>>>> which is at git://git.openembedded.org/meta-openembedded according
>>>>>> to http://www.openembedded.org/wiki/LayerIndex
>>>>>>
>>>>>> --
>>>>>> ------------------------------------------------------------
>>>>>> Gary Thomas | Consulting for the
>>>>>> MLB Associates | Embedded world
>>>>>> ------------------------------------------------------------
>>>>>> _______________________________________________
>>>>>> yocto mailing list
>>>>>> yocto at yoctoproject.org
>>>>>> https://lists.yoctoproject.org/listinfo/yocto
>>>>
>>>>
>>>>
>>>> --
>>>> ------------------------------------------------------------
>>>> Gary Thomas | Consulting for the
>>>> MLB Associates | Embedded world
>>>> ------------------------------------------------------------
>
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
More information about the yocto
mailing list