[yocto] raspberrypi image questions
Gary Thomas
gary at mlbassoc.com
Wed Sep 5 11:16:44 PDT 2012
I just built Yocto/Poky for the raspberrypi, following the
recent thread on this list. I noticed that the resulting SD
image is ~4GB, but most of that space seems to be unused:
$ ssh root at 192.168.1.150
Warning: Permanently added '192.168.1.150' (RSA) to the list of known hosts.
root at 192.168.1.150's password:
root at raspberrypi:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 57388 46754 7718 86% /
none 93964 156 93808 0% /dev
/dev/mmcblk0p2 57388 46754 7718 86% /media/mmcblk0p2
/dev/mmcblk0p1 19400 8928 10472 46% /media/mmcblk0p1
tmpfs 93964 56 93908 0% /var/volatile
tmpfs 93964 0 93964 0% /dev/shm
tmpfs 93964 0 93964 0% /media/ram
root at raspberrypi:~# cat /proc/partitions
major minor #blocks name
179 0 3977216 mmcblk0
179 1 19456 mmcblk0p1
179 2 3885056 mmcblk0p2
Notice that the physical partition for /dev/mmcblk0p2 is huge but
the file system is only 57MB.
How can I adjust my build and/or resize the file system to actually
use the rest of the SD card?
Also, is it possible to just build the SD image much like I do for
other devices like the BeagleBoard, albeit with different contents
in /boot? Sloshing around 4GB images is rather painful, plus it
takes forever to DD it to the SD card.
Thanks
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the yocto
mailing list