[yocto] Performance improvements and machine build configuration

[Ross Burton]

On Tuesday, 23 October 2012 at 22:19, McClintock Matthew-B29882 wrote:
> On Tue, Oct 23, 2012 at 1:45 PM, Elvis Dowson <elvis.dowson at gmail.com (mailto:elvis.dowson at gmail.com)> wrote:
> > The only curious thing that I've noticed is that I don't see a large performance improvement using a standard 3TB Seagate Barracuda 7200 RPM HDD, and the two Intel Series 330 SSDs in a striped RAID0 configuration. The read (600MB/s) / write (838MB/s) figures are impressive, although I expected the read performance to be higher than write performance, as is normally with a single SSD. I'm using the motherboard's hardware RAID support on a 6GB/s SATA 3 port.
> 
> 
> 
> You probably don't use much disk I/O with 16GB of memory for a build.
My machine has 16G of RAM, and after a good build will have 12G of "cache" (according to /proc), but the disk activity light was frantic.  I can only imagine it would be more frantic with less RAM to act as an over-sized disk cache.

Ross