[yocto] [PATCH 1/3] [meta-intel] meta-intel/common:Add a new recipe for Zlib qat_mem Module.
Tom Zanussi
tom.zanussi at intel.com
Mon Oct 22 06:24:22 PDT 2012
On Sun, 2012-10-21 at 23:03 -0500, Tom Zanussi wrote:
> On Sun, 2012-10-21 at 22:15 -0500, Bodke, Kishore K wrote:
> >
> > >-----Original Message-----
> > >From: Zanussi, Tom
> > >Sent: Friday, October 19, 2012 11:49 AM
> > >To: Bodke, Kishore K
> > >Cc: Kamble, Nitin A; yocto at yoctoproject.org
> > >Subject: Re: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new recipe
> > >for Zlib qat_mem Module.
> > >
> > >On Fri, 2012-10-19 at 13:40 -0500, Bodke, Kishore K wrote:
> > >>
> > >> >-----Original Message-----
> > >> >From: Zanussi, Tom
> > >> >Sent: Friday, October 19, 2012 11:35 AM
> > >> >To: Bodke, Kishore K
> > >> >Cc: Kamble, Nitin A; yocto at yoctoproject.org
> > >> >Subject: Re: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new
> > >recipe
> > >> >for Zlib qat_mem Module.
> > >> >
> > >> >Hi Kishore,
> > >> >
> > >> >I've built these and they look ok as far as that goes.
> > >> >
> > >> >But I'm wondering, which kernel did you test with and which kernel(s)
> > >> >are these modules designed for i.e. will they work with all the kernels
> > >> >supported for 1.3?
> > >>
> > >> Hi Tom,
> > >>
> > >> I have tested them for 3.4 Kernel for Yocto, since for Crystal Forest we only
> > >have 3.4 for now.
> > >> Apart from that, it should work with all the kernel versions.
> > >> I have tested 3.0 and 3.5 on Fedora.
> > >>
> > >
> > >OK, for something in common, we have to think about someone using them
> > >with any yocto kernel, not just 3.4. Since you're saying they work with
> > >3.0, 3.4 and 3.5, I guess there's not too much risk that they'll break
> > >with 3.2. If that's not the case, you should probably restrict them to
> > >your BSP (but we don't want multiple copies) either.
> > >
> > >The best thing would be to move them into the linux-yocto kernel(s) they
> > >have been tested with - that way users know those features work and are
> > >safe to use in their BSPs.
> > >
> >
> > These modules just need the configured kernel for them to build with.
> > It is not specific to particular kernel version.
> >
> > Also, every time the Kernel version moves, this whole set needs to be moved too.
> > Instead have it in the BSP and we do not have to run around moving around with the different kernels.
> > Instead it is nice to have one copy in common.
> >
>
> Hmm, I'm not able to build them with linux-yocto-3.2:
>
OK, not sure what happened here, but as a test I tried building them for
jasperforest using a 3.2 kernel and the modules built without problem.
So, pulled into meta-intel/master.
Tom
> [trz at empanada build]$ bitbake core-image-qat
> Loading cache: 100% |######################################################################################| ETA: 00:00:00
> Loaded 1156 entries from dependency cache.
>
> Build Configuration:
> BB_VERSION = "1.16.0"
> TARGET_ARCH = "x86_64"
> TARGET_OS = "linux"
> MACHINE = "crystalforest-shumway"
> DISTRO = "poky"
> DISTRO_VERSION = "1.3"
> TUNE_FEATURES = "m64"
> TARGET_FPU = ""
> meta
> meta-yocto
> meta-yocto-bsp = "danny0:4cce3e4abab65116ca968174e59a049438ec7385"
> meta-intel
> meta-crystalforest = "master0:c94e89507fbab050efa2e326ec92e63fb9dc07a6"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> NOTE: validating kernel configuration
> WARNING: Can't find any BSP hardware or required configuration fragments.
> WARNING: Looked at meta/cfg/standard/crystalforest/hdw_frags.txt and meta/cfg/standard/crystalforest/required_frags.txt in directory: meta/cfg/standard/crystalforest
> WARNING: QA Issue: Architecture did not match (62 to 2) on /work/x86_64-poky-linux/canterbury-corpus-1.0-r0/packages-split/canterbury-corpus/lib/firmware/sum
> ERROR: Function failed: do_compile (see /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/temp/log.do_compile.19389 for further information)
> ERROR: Logfile of failure stored in: /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/temp/log.do_compile.19389
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 16 -e MAKEFLAGS= KERNEL_CC=x86_64-poky-linux-gcc
> | x86_64-poky-linux-gcc -m64 --sysroot=/home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway -g -o qat_mem_test qat_mem_test.c
> | make -C /home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway/usr/src/kernel SUBDIRS=/home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem modules
> | make[1]: Entering directory `/home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway/usr/src/kernel'
> | CC [M] /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.o
> | Building modules, stage 2.
> | MODPOST 1 modules
> | CC /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.o
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:8:1: error: variable '__this_module' has initializer but incomplete type
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:9:2: error: unknown field 'name' specified in initializer
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:9:2: warning: excess elements in struct initializer [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:9:2: warning: (near initialization for '__this_module') [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:10:2: error: unknown field 'init' specified in initializer
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:10:2: warning: excess elements in struct initializer [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:10:2: warning: (near initialization for '__this_module') [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:14:2: error: unknown field 'arch' specified in initializer
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:14:10: error: 'MODULE_ARCH_INIT' undeclared here (not in a function)
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:14:2: warning: excess elements in struct initializer [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.c:14:2: warning: (near initialization for '__this_module') [enabled by default]
> | make[2]: *** [/home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/openssl-1.0.1/engines/qat_engine/qat_mem/qat_mem.mod.o] Error 1
> | make[1]: *** [modules] Error 2
> | make[1]: Leaving directory `/home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway/usr/src/kernel'
> | make: *** [all] Error 2
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (see /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/openssl-qat-module-1.0.1-r0/temp/log.do_compile.19389 for further information)
> ERROR: Task 393 (/home/trz/yocto/isg-test/meta-intel/common/recipes-connectivity/openssl-qat-module/openssl-qat-module.bb, do_compile) failed with exit code '1'
> ERROR: Function failed: do_compile (see /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/temp/log.do_compile.20691 for further information)
> ERROR: Logfile of failure stored in: /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/temp/log.do_compile.20691
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 16 -e MAKEFLAGS= KERNEL_CC=x86_64-poky-linux-gcc
> | x86_64-poky-linux-gcc -m64 --sysroot=/home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway -g -o qat_mem_test qat_mem_test.c
> | make -C /home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway/usr/src/kernel SUBDIRS=/home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem modules
> | make[1]: Entering directory `/home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway/usr/src/kernel'
> | CC [M] /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.o
> | Building modules, stage 2.
> | MODPOST 1 modules
> | CC /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.o
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:8:1: error: variable '__this_module' has initializer but incomplete type
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:9:2: error: unknown field 'name' specified in initializer
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:9:2: warning: excess elements in struct initializer [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:9:2: warning: (near initialization for '__this_module') [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:10:2: error: unknown field 'init' specified in initializer
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:10:2: warning: excess elements in struct initializer [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:10:2: warning: (near initialization for '__this_module') [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:14:2: error: unknown field 'arch' specified in initializer
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:14:10: error: 'MODULE_ARCH_INIT' undeclared here (not in a function)
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:14:2: warning: excess elements in struct initializer [enabled by default]
> | /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.c:14:2: warning: (near initialization for '__this_module') [enabled by default]
> | make[2]: *** [/home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/zlib-1.2.7/contrib/qat/qat_mem/qat_mem.mod.o] Error 1
> | make[1]: *** [modules] Error 2
> | make[1]: Leaving directory `/home/trz/yocto/isg-test/build/tmp/sysroots/crystalforest-shumway/usr/src/kernel'
> | make: *** [all] Error 2
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (see /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/zlib-qat-module-1.2.7-r0/temp/log.do_compile.20691 for further information)
> ERROR: Task 380 (/home/trz/yocto/isg-test/meta-intel/common/recipes-core/zlib-qat-module/zlib-qat-module.bb, do_compile) failed with exit code '1'
> ERROR: QA Issue: Architecture did not match (62 to 3) on /work/crystalforest_shumway-poky-linux/linux-yocto-3.2.18+git1+486f7aec824b4127e91ef53228823e996b3696f0_1+34e3cd8b7a1d18594a63b7b299fce46e32a6c80c-r4.1/packages-split/kernel-vmlinux/boot/vmlinux-3.2.18-yocto-standard
> ERROR: QA run found fatal errors. Please consider fixing them.
> ERROR: Function failed: do_package_qa
> ERROR: Logfile of failure stored in: /home/trz/yocto/isg-test/build/tmp/work/crystalforest_shumway-poky-linux/linux-yocto-3.2.18+git1+486f7aec824b4127e91ef53228823e996b3696f0_1+34e3cd8b7a1d18594a63b7b299fce46e32a6c80c-r4.1/temp/log.do_package.8684
> ERROR: Task 1019 (/home/trz/yocto/isg-test/meta/recipes-kernel/linux/linux-yocto_3.2.bb, do_package) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 3903 tasks of which 346 didn't need to be rerun and 3 failed.
> Waiting for 0 running tasks to finish:
>
> Summary: 3 tasks failed:
> /home/trz/yocto/isg-test/meta-intel/common/recipes-connectivity/openssl-qat-module/openssl-qat-module.bb, do_compile
> /home/trz/yocto/isg-test/meta-intel/common/recipes-core/zlib-qat-module/zlib-qat-module.bb, do_compile
> /home/trz/yocto/isg-test/meta/recipes-kernel/linux/linux-yocto_3.2.bb, do_package
> Summary: There was 1 WARNING message shown.
> Summary: There were 5 ERROR messages shown, returning a non-zero exit code.
>
>
> Can you please verify that these recipes will work with linux-yocto-3.2? So far I'm not seeing that they will.
>
> Tom
>
> > Thanks
> > Kishore.
> >
> > >Tom
> > >
> > >> Thanks
> > >> Kishore.
> > >>
> > >> >
> > >> >Tom
> > >> >
> > >> >On Fri, 2012-10-19 at 13:28 -0500, Bodke, Kishore K wrote:
> > >> >>
> > >> >> >-----Original Message-----
> > >> >> >From: Kamble, Nitin A
> > >> >> >Sent: Friday, October 19, 2012 11:28 AM
> > >> >> >To: Bodke, Kishore K; Zanussi, Tom; yocto at yoctoproject.org
> > >> >> >Subject: RE: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new
> > >> >recipe
> > >> >> >for Zlib qat_mem Module.
> > >> >> >
> > >> >> >Hi Kishore,
> > >> >> > Same here, if it is not used by multiple BSPs yet, then it should go in
> > >the
> > >> >BSP
> > >> >> >specific layer.
> > >> >> >
> > >> >> Yes, these too will be used by both Crystal Forest and Rangely.
> > >> >>
> > >> >> Thanks
> > >> >> Kishore.
> > >> >>
> > >> >> >Thanks,
> > >> >> >Nitin
> > >> >> >
> > >> >> >
> > >> >> >> -----Original Message-----
> > >> >> >> From: Bodke, Kishore K
> > >> >> >> Sent: Thursday, October 18, 2012 11:19 AM
> > >> >> >> To: Zanussi, Tom; Kamble, Nitin A; yocto at yoctoproject.org
> > >> >> >> Cc: Bodke, Kishore K
> > >> >> >> Subject: [PATCH 1/3] [meta-intel] meta-intel/common:Add a new
> > >recipe
> > >> >for
> > >> >> >> Zlib qat_mem Module.
> > >> >> >>
> > >> >> >> From: Kishore Bodke <kishore.k.bodke at intel.com>
> > >> >> >>
> > >> >> >> This adds a new recipe to build the Intel Quick Assist Technology
> > >Memory
> > >> >> >> Management Module for Zlib.
> > >> >> >>
> > >> >> >> Signed-off-by: Kishore Bodke <kishore.k.bodke at intel.com>
> > >> >> >> ---
> > >> >> >> .../zlib-qat-module/zlib-qat-module.bb | 52
> > >> >> >> ++++++++++++++++++++
> > >> >> >> .../zlib-qat-module/zlib_qat_module.patch | 43
> > >> >++++++++++++++++
> > >> >> >> 2 files changed, 95 insertions(+)
> > >> >> >> create mode 100644 common/recipes-core/zlib-qat-module/zlib-qat-
> > >> >> >> module.bb
> > >> >> >> create mode 100644 common/recipes-core/zlib-qat-module/zlib-qat-
> > >> >> >> module/zlib_qat_module.patch
> > >> >> >>
> > >> >> >> diff --git a/common/recipes-core/zlib-qat-module/zlib-qat-module.bb
> > >> >> >> b/common/recipes-core/zlib-qat-module/zlib-qat-module.bb
> > >> >> >> new file mode 100644
> > >> >> >> index 0000000..5ade06e
> > >> >> >> --- /dev/null
> > >> >> >> +++ b/common/recipes-core/zlib-qat-module/zlib-qat-module.bb
> > >> >> >> @@ -0,0 +1,52 @@
> > >> >> >> +SUMMARY="Zlib QAT_MEM Memory Management Module for Intel
> > >> >Quick
> > >> >> >> Assist \
> > >> >> >> +Technology"
> > >> >> >> +DESCRIPTION="This software acelerates the data compression
> > >> >algorithm \
> > >> >> >> +in the zlib software library via the Intel QuickAssist Technology \
> > >> >> >> +implemented on Intel Communications Chipset 89xx Series based
> > >> >> >> platforms."
> > >> >> >> +
> > >> >> >> +HOMEPAGE = "http://zlib.net/"
> > >> >> >> +SECTION = "libs"
> > >> >> >> +LICENSE = "Zlib & GPLv2 & BSD"
> > >> >> >> +
> > >> >> >> +LIC_FILES_CHKSUM = "file://${WORKDIR}/zlib-
> > >> >> >>
> > >>
> > >>${PV}/zlib.h;beginline=4;endline=23;md5=94d1b5a40dadd127f3351471727e6
> > >> >> >> 6a9 \
> > >> >> >> + file://${COMMON_LICENSE_DIR}/GPL-
> > >> >> >> 2.0;md5=801f80980d171dd6425610833a22dbe6 \
> > >> >> >> +
> > >> >> >>
> > > file://${COMMON_LICENSE_DIR}/BSD;md5=3775480a712fc46a696476
> > >> >> >> 78acb234cb"
> > >> >> >> +PV = "1.2.7"
> > >> >> >> +ZLIB_QAT_VERSION = "0.4.0-011"
> > >> >> >> +
> > >> >> >> +PR="r0"
> > >> >> >> +
> > >> >> >> +SRC_URI = "http://www.zlib.net/zlib-${PV}.tar.gz;name=zlib \
> > >> >> >> + http://downloadmirror.intel.com/20294/eng/zlib-${PV}-
> > >> >> >> qat.L.${ZLIB_QAT_VERSION}.tar.gz;name=zlib_qat \
> > >> >> >> + file://zlib_qat_module.patch"
> > >> >> >> +
> > >> >> >> +SRC_URI[zlib.md5sum]="60df6a37c56e7c1366cca812414f7b85"
> > >> >> >>
> > >>
> > >>+SRC_URI[zlib.sha256sum]="fa9c9c8638efb8cb8ef5e4dd5453e455751e1c530
> > >> >> >> b1595eed466e1be9b7e26c5"
> > >> >> >> +
> > >> >> >> +SRC_URI[zlib_qat.md5sum]="88e4140f98d2f9e170bf473f20e1a8d4"
> > >> >> >>
> > >> >>
> > >>
> > >>>+SRC_URI[zlib_qat.sha256sum]="3c360878127f3930e64640ef5a5822719a50
> > >59
> > >> >> >> 143326bb4c396645ae37b704a6"
> > >> >> >> +
> > >> >> >> +S = "${WORKDIR}/zlib-${PV}/contrib/qat/qat_mem"
> > >> >> >> +
> > >> >> >> +inherit module
> > >> >> >> +export KERNEL_SOURCE_ROOT = "${STAGING_KERNEL_DIR}"
> > >> >> >> +
> > >> >> >> +do_patch() {
> > >> >> >> + cd ${WORKDIR}/zlib-${PV}
> > >> >> >> + patch -p0 < ${WORKDIR}/zlib-${PV}-
> > >> >> >> qat.L.${ZLIB_QAT_VERSION}.patch
> > >> >> >> +
> > >> >> >> + cd ${WORKDIR}
> > >> >> >> + patch -p1 < ${WORKDIR}/zlib_qat_module.patch
> > >> >> >> +}
> > >> >> >> +
> > >> >> >> +do_compile() {
> > >> >> >> + cd ${S}
> > >> >> >> + oe_runmake KERNEL_CC="${KERNEL_CC}"
> > >> >> >> +}
> > >> >> >> +
> > >> >> >> +do_install_append() {
> > >> >> >> + install -m 0755 -d ${D}${bindir}
> > >> >> >> + install -m 0755 ${S}/qat_mem_test ${D}${bindir}
> > >> >> >> +}
> > >> >> >> +
> > >> >> >> +FILES_${PN} += "${bindir}/qat_mem_test"
> > >> >> >> diff --git a/common/recipes-core/zlib-qat-module/zlib-qat-
> > >> >> >> module/zlib_qat_module.patch b/common/recipes-core/zlib-qat-
> > >> >> >> module/zlib-qat-module/zlib_qat_module.patch
> > >> >> >> new file mode 100644
> > >> >> >> index 0000000..a30f8b0
> > >> >> >> --- /dev/null
> > >> >> >> +++ b/common/recipes-core/zlib-qat-module/zlib-qat-
> > >> >> >> module/zlib_qat_modul
> > >> >> >> +++ e.patch
> > >> >> >> @@ -0,0 +1,43 @@
> > >> >> >> +Index: zlib-qat-module-1.2.7-r0/zlib-
> > >> >1.2.7/contrib/qat/qat_mem/Makefile
> > >> >> >>
> > >>
> > >>+=========================================================
> > >> >> >> ==========
> > >> >> >> +--- zlib-qat-module-1.2.7-r0.orig/zlib-
> > >> >1.2.7/contrib/qat/qat_mem/Makefile
> > >> >> >> 2012-10-16 13:53:10.258938722 -0700
> > >> >> >> ++++ zlib-qat-module-1.2.7-r0/zlib-
> > >1.2.7/contrib/qat/qat_mem/Makefile
> > >> >> >> 2012-10-16 13:59:18.174944864 -0700
> > >> >> >> +@@ -59,13 +59,10 @@
> > >> >> >> + #
> > >> >> >> + #
> > >> >> >> +
> > >> >> >>
> > >>
> > >>+#########################################################
> > >> >> >> ##############
> > >> >> >> +##
> > >> >> >> +-
> > >> >> >> + MODULENAME := qat_mem
> > >> >> >> +-KDIR := /lib/modules/$(shell uname -r)/build
> > >> >> >> ++KDIR := $(KERNEL_SOURCE_ROOT)
> > >> >> >> + PWD := $(shell pwd)
> > >> >> >> +-
> > >> >> >> +-CC := gcc -Wall -imacros /usr/src/kernels/$(shell uname -
> > >> >> >> r)/include/linux/autoconf.h
> > >> >> >> +-
> > >> >> >> ++CC := $(KERNEL_CC) -Wall -imacros
> > >> >> >> $(KERNEL_SOURCE_ROOT)/include/generated/autoconf.h
> > >> >> >> + ifeq ($(KERNELRELEASE),)
> > >> >> >> + all: $(MODULENAME)_test
> > >> >> >> + all:
> > >> >> >> +@@ -73,20 +70,15 @@
> > >> >> >> + else
> > >> >> >> + obj-m := $(MODULENAME).o
> > >> >> >> + endif
> > >> >> >> +-
> > >> >> >> ++modules_install:
> > >> >> >> ++ $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules_install
> > >> >> >> + $(MODULENAME)_test: $(MODULENAME)_test.c
> > >> >> >> + $(CC) -g -o $(MODULENAME)_test $(MODULENAME)_test.c
> > >> >> >> +-
> > >> >> >> +-
> > >> >> >> + load:
> > >> >> >> + insmod ./$(MODULENAME).ko
> > >> >> >> +-
> > >> >> >> + unload:
> > >> >> >> + rmmod $(MODULENAME)
> > >> >> >> +-
> > >> >> >> + test: all
> > >> >> >> + ./$(MODULENAME)_test
> > >> >> >> +-
> > >> >> >> + clean:
> > >> >> >> + rm -f *.o *.ko Module.symvers modules.order *.mod.c
> > >.*.cmd
> > >> >> >> +$(MODULENAME)_test
> > >> >> >> +-
> > >> >> >> --
> > >> >> >> 1.7.9.5
> > >> >>
> > >> >
> > >>
> > >
> >
>
More information about the yocto
mailing list