[yocto] 1.3 RC3 full pass test reports
Liu, Song
song.liu at intel.com
Wed Oct 10 16:34:13 PDT 2012
Hi Laurentiu,
Thanks a lot for the full test report. Great work!
Here’s a quick summary of the bugs in this report:
* Resolved: 3142, 3186, 3201 ,3203
* Release note candidate: 3080, 3100, 2694
* Patch Review: 3199
* 3233: might be a QA machine setup issue. Tom/Jessica cannot recreate. Needs QA verification/feedback
* 3007: it's an enhancement, not a bug.
* 3116: patch merged, needs to be marked as resolved and QA verification.
* All others (2878 2918 3125 and others) are still being worked on. 2878 seems widespread, I’ll check with Mark Hatle. Others don't seem to indicate any special concern, especially for the release at this point.
Please make sure we verify all the resolved bugs here in M4 build and work with Tom/Jessica to clarify 3233.
Thanks!
Song
From: yocto-bounces at yoctoproject.org [mailto:yocto-bounces at yoctoproject.org] On Behalf Of Serban, Laurentiu
Sent: Wednesday, October 10, 2012 1:12 PM
To: yocto at yoctoproject.org
Subject: [yocto] 1.3 RC3 full pass test reports
Hello guys,
Here are the test results for the 1.3 RC3 full pass.
The commit id is: 86c9aa8081f107420cd3763d0566d779daddc2b1
For the performance tests: the build for sato x86 took 88 minutes (a slight decrease in perfomance)
The following issue are encountered. I also updated with comments from Jessica and Saul:
- For the BSPs:
o For qemu x86_64 images - the zypper refresh fails (2694),
o For all the boards there is commos n issue with the Sudoku-savant application (2878)
o Dmesg errors on e-menlow sato image (2866)
o An old problem shutting down and arm qemu machine (684)
- For core build system:
o There are still errors with the do_rootfs fails for lib64-core-image-sato-sdk (2918), there is a small issue with the sstate-cache-management.sh (3116) and there is a problem related to meta-intel BSP creation using yocto-bsp (3142).
o Also there is an issue with dash vs. x32 on Ubuntu (3080) [SW] bash vs dash issue on Ubuntu
- For ADT
o There are issues with the lttng (3203) and meta-toolchain-support (3100). [JZ] This one is the only one that remains as an issue
o There is an issue using the standalone toolchain for ARM and x86 (3201) [JZ] resolved
o An error occurs when selecting kernel 3.4 in Yocto-bsp tool (3233) [JZ] need confirmation for AlexG, maybe a sighting? since both Tom and I can’t reproduce from commandline and eclipse plugin
o iptables 1.4.15 compile failed on qemux86,qemuarm i686 gmae-toolchain (3125)
- For HOB:
o Choosing another toolchain host than x86_64 produces an hob-toolchain error (3199)
o Improve bblayers-hob.conf (3007)
Test Result Summary
Component
Target
Status
Comments
Boards
p1022ds
GOOD
Sudoku-savant issue (2878)
Beagleboard
GOOD
Sudoku-savant issue (2878, 3186)
Routerstationpro
GOOD
Sudoku-savant issue (2878)
Mpc8315e-rdb
GOOD
Sudoku-savant issue (2878)
eMenlow-sato-sdk
BUGGY
Sudoku-savant issue (2878)
dmesg errors on emenlow sato image (2866)
Blacksand-sato-sdk
GOOD
Sudoku-savant issue (2878)
Sugarbay sato-sdk
GOOD
Sudoku-savant issue (2878)
Crownbay-emgd-sato-sdk
GOOD
Sudoku-savant issue (2878)
FRI2-sato
GOOD
Sudoku-savant build issue (2878)
HuronRiver-sato
GOOD
Sudoku-savant issue (2878)
Jasperforest-lsb
GOOD
Sudoku-savant issue (2878), zypper is not installed in core-image-lsb-sdk (3098)
QEMU
Qemuarm
GOOD
Everything runs well
Qemuppc
GOOD
Everything runs well
Qemumips
GOOD
Everything runs well
qemux86
GOOD
Everything runs well
qemux86-64
BUGGY
Zypper issue (2694)
Core build system
BUGGY
incremental RPM generation (3047),
lib64-core-image-sato-sdk fails due to do_rootfs issue (2918)
sstate-cache-management.sh prints some error message when running (3116)
[meta-x32] x32 image fails to build due to no recipes available for eglib_2.15 (3080)
HOB
GOOD
[HOB]toolchain arch in settings is not saved (3199)
Improve bblayers-hob.conf (3007)
ADT
BUGGY
autoreconf run failed on x86-64 gmae-toolchain (3100)
cannot build Hello World Ansi C project using standalone Toolchain for ARM and X86 (3201)
kernel trace type not available in the lttng project (3203)
error when selecting kernel version 3.4 in yocto bsp tool (3233)
iptables 1.4.15 compile failed on qemux86,qemuarm i686 gmae-toolchain (3125)
Stress Testing
GOOD
Both Crashme and Helltest on Jasperforest could pass 24 hours stress testing
Distribution Support
GOOD
Everything runs well for Ubuntu 12.04, Ubuntu 12.10 - nightly, OpenSuse 12.1, OpenSuse 12.2 RC2, Fedora 17, CentOs 6.3, Fedora 16
Power and Performance
GOOD
one qemux86 sato build on a Core i7 machine costs 88 minutes with the packages previously fetched.
Compliance
GOOD
Tests on Huron River and BlackSand passed
Build Appliance
GOOD
Everything runs well on VMWare Player (on Ubuntu). The relevant tests were performed also for qemu-kvm on Fedora 17 libvirt and
VMWare Workstation.(Ubuntu)
Detailed Test Result for each component
Target
Total TCs
Not Run
Passed
Failed
Not testable (Blocked)
Beagleboard Sato-SDK
42
0
37
5(2878, 3186)
0
Routerstationpro Sato-SDK
35
0
34
1(2878)
0
p1022ds-sato-sdk
37
0
36
1(2878)
0
Mpc8315e-rdb Sato-SDK
37
0
36
1(2878)
0
eMenlow Sato-sdk
67
0
64
3 (bug 2878,3091)
0
n450 Sato-sdk
67
0
66
1 (bug 2878)
0
Crownbay-Sato-sdk
65
0
62
3 (2878, 2792, 2386, 1258)
0
FRI2 Sato-sdk
85
0
84
1 (2878)
0
HuronRiver Sato-sdk
68
0
67
1 (2878)
0
Sugarbay sato-sdk
68
0
67
1 (2878)
0
Jasperforest lsb-sdk
34
0
26
8 (2878,3098)
0
Qemuarm Sato
31
0
31
0
0
Qemuarm Sato-SDK
36
0
36
0
0
Qemumips Sato
31
0
31
0
0
Qemumips Sato-SDK
36
0
36
0
0
Qemuppc Sato
31
0
31
0
0
Qemuppc Sato-SDK
36
0
36
0
0
Qemux86-64 Sato
30
0
27
3 (bug 2694)
0
Qemux86-64 Sato-SDK
36
0
32
4 (bug 2694)
0
Qemux86 Sato
30
0
30
0
0
Qemux86 Sato-SDK
36
0
36
0
0
Core build system
64
0
57
7 (3142, 2918, 3116,3080)
0
HOB
39
0
37
2(3199,3007 )
0
ADT
53
0
40
13(3201, 3203, 3100)
0
Build Appliance
14
0
13
1 (3243)
0
Total
1108
0
1052
56
0
Component
Bug Number
Target Milestone
System & Core OS
System Usage
Bug 2878 pkgconfig is missing from sato-sdk image - installing and then trying to removing it leads to rpm crashes/assertions
Bug 2694 [QEMU-X86_64]zypper refresh fail
Bug 3186 BeagleBoard: rpm query package failed due to glibc realloc() error
Core build system
Bug 3142 [yocto-bsp] kernel panic message for yocto-bsp based images.
Bug 3116 sstate-cache-management.sh prints some error message when running
Bug 3080 [meta-x32] x32 image fails to build due to no recipes available for eglib_2.15
Bug 2918 lib64-core-image-sato-sdk fails due to do_rootfs issue.
ADT
Bug 3100 autoreconf run failed on x86-64 gmae-toolchain
Bug 3201 cannot build Hello World Ansi C project using standalone Toolchain for ARM and X86
Bug 3203 kernel trace type not available in the lttng project
Bug 3233 error when selecting kernel version 3.4 in yocto bsp tool
Bug 3125 iptable 1.4.15 compile failed on qemux86,qemuarm i686 gmae-toolchain
HOB
Bug 3199 Choosing another toolchain host than x86_64 produces an hob-toolchain error
Bug 3007 Improve bblayers-hob.conf
Best regards,
Laurentiu Serban
QA Engineer
Open Source Technology Center
System Software Division Romania
Desk: +40 31 8604742
iNET: 88451042
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20121010/564d5bed/attachment.html>
More information about the yocto
mailing list