[yocto] Trouble building RasberryPi with Yocto/Poky
Gary Thomas
gary at mlbassoc.com
Mon May 21 11:56:04 PDT 2012
On 2012-05-21 12:47, Andrei Gherzan wrote:
> Give some more output please.
That's about all there is - you can see the layer versions, it's breaking during the
kernel install. Looks like there may be some package dependency that's missing - where
does the 'lib/__firmware/ti_3410.fw' file get created?
The full (install) log for the kernel has no other useful info.
Maybe some guidance on how this was built, e.g. how does one build a bootable
image using OE & meta-raspberrypi? what image to build?
>
> On May 21, 2012 8:51 PM, "Gary Thomas" <gary at mlbassoc.com <mailto:gary at mlbassoc.com>> wrote:
>
> I tried to build a simple image using just Poky+meta-raspberrypi
> Build Configuration:
> BB_VERSION = "1.15.2"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "raspberrypi"
> DISTRO = "poky"
> DISTRO_VERSION = "1.2+snapshot-20120521"
> TUNE_FEATURES = "armv6 vfp arm1176jzfs"
> TARGET_FPU = "vfp"
> meta
> meta-yocto = "master:__f24d8df3af52e2a2911233746ad69f__8899bbdf93"
> meta-raspberrypi = "master:__d1e802561ab5c70680fd6ee70a4779__1fe78aa977"
>
> When I ran 'bitbake core-image-sato', I got this error:
>
> | make[1]: *** No rule to make target
> `/local/rpi_poky/tmp/work/__raspberrypi-poky-linux-__gnueabi/linux-raspberrypi-3.1.__9-rpi+r1+__git0ec4154d64ebba48ca2446cde60__a90546311defc-r1/image/lib/__firmware/./',
> needed by
> `/local/rpi_poky/tmp/work/__raspberrypi-poky-linux-__gnueabi/linux-raspberrypi-3.1.__9-rpi+r1+__git0ec4154d64ebba48ca2446cde60__a90546311defc-r1/image/lib/__firmware/ti_3410.fw'.
> Stop.
>
> Any ideas how to move forward?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the yocto
mailing list