[yocto] [PATCH 02/17][KERNEL] drm-psb: remove the package Makefile and replace it with the kernel Makefile
tom.zanussi at intel.com
tom.zanussi at intel.com
Tue Mar 13 20:57:28 PDT 2012
From: Tom Zanussi <tom.zanussi at intel.com>
The default Makefile is meant for building the modules externally.
Replace it with the normal kernel Makefile (Makefile.kernel).
Signed-off-by: Tom Zanussi <tom.zanussi at intel.com>
---
drivers/gpu/drm-psb/Makefile | 433 ++++++-----------------------------
drivers/gpu/drm-psb/Makefile.kernel | 76 ------
2 files changed, 71 insertions(+), 438 deletions(-)
delete mode 100644 drivers/gpu/drm-psb/Makefile.kernel
diff --git a/drivers/gpu/drm-psb/Makefile b/drivers/gpu/drm-psb/Makefile
index ffb397e..702bf28 100644
--- a/drivers/gpu/drm-psb/Makefile
+++ b/drivers/gpu/drm-psb/Makefile
@@ -1,367 +1,76 @@
-# Makefile -- For the Direct Rendering Manager module (drm)
#
-# Based on David Woodhouse's mtd build.
-#
-# Modified to handle the DRM requirements and builds on a wider range of
-# platforms in a flexible way by David Dawes. It's not clear, however,
-# that this approach is simpler than the old one.
-#
-# The purpose of this Makefile is to handle setting up everything
-# needed for an out-of-kernel source build. Makefile.kernel contains
-# everything required for in-kernel source builds. It is included into
-# this file, so none of that should be duplicated here.
-#
-# $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/Makefile.linux,v 1.40 2003/08/17 17:12:25 dawes Exp $
-#
-
-#
-# By default, the build is done against the running linux kernel source.
-# To build against a different kernel source tree, set LINUXDIR:
-#
-# make LINUXDIR=/path/to/kernel/source
-
-#
-# To build only some modules, either set DRM_MODULES to the list of modules,
-# or specify the modules as targets:
+# Makefile for the drm device driver. This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
-# make r128.o radeon.o
-#
-# or:
+# Based on David Woodhouse's mtd build.
#
-# make DRM_MODULES="r128 radeon"
+# $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/Makefile.kernel,v 1.18 2003/08/16 17:59:17 dawes Exp $
#
-SHELL=/bin/sh
-
-.SUFFIXES:
-
-ifndef LINUXDIR
-RUNNING_REL := $(shell uname -r)
-
-LINUXDIR := $(shell if [ -e /lib/modules/$(RUNNING_REL)/source ]; then \
- echo /lib/modules/$(RUNNING_REL)/source; \
- else echo /lib/modules/$(RUNNING_REL)/build; fi)
-endif
-
-ifndef O
-O := $(shell if [ -e /lib/modules/$(RUNNING_REL)/build ]; then \
- echo /lib/modules/$(RUNNING_REL)/build; \
- else echo ""; fi)
-#O := $(LINUXDIR)
-endif
-
-ifdef ARCH
-MACHINE := $(ARCH)
-else
-MACHINE := $(shell uname -m)
-endif
-
-# Modules for all architectures
-MODULE_LIST := drm.o tdfx.o r128.o radeon.o mga.o sis.o savage.o via.o \
- mach64.o nv.o nouveau.o psb.o xgi.o
-
-# Modules only for ix86 architectures
-ifneq (,$(findstring 86,$(MACHINE)))
-ARCHX86 := 1
-MODULE_LIST += i810.o i915.o
-endif
-
-ifneq (,$(findstring sparc64,$(MACHINE)))
-ARCHSPARC64 := 1
-#MODULE_LIST += ffb.o
-endif
-
-DRM_MODULES ?= $(MODULE_LIST)
-
-# These definitions are for handling dependencies in the out of kernel build.
-
-DRMHEADERS = drmP.h drm_compat.h drm_os_linux.h drm.h drm_sarea.h
-COREHEADERS = drm_core.h drm_sman.h drm_hashtab.h
-
-TDFXHEADERS = tdfx_drv.h $(DRMHEADERS)
-R128HEADERS = r128_drv.h r128_drm.h $(DRMHEADERS)
-RADEONHEADERS = radeon_drv.h radeon_drm.h r300_reg.h $(DRMHEADERS)
-MGAHEADERS = mga_drv.h mga_drm.h mga_ucode.h $(DRMHEADERS)
-I810HEADERS = i810_drv.h i810_drm.h $(DRMHEADERS)
-I915HEADERS = i915_drv.h i915_drm.h $(DRMHEADERS)
-SISHEADERS= sis_drv.h sis_drm.h drm_hashtab.h drm_sman.h $(DRMHEADERS)
-SAVAGEHEADERS= savage_drv.h savage_drm.h $(DRMHEADERS)
-VIAHEADERS = via_drm.h via_drv.h via_3d_reg.h via_verifier.h $(DRMHEADERS)
-MACH64HEADERS = mach64_drv.h mach64_drm.h $(DRMHEADERS)
-NVHEADERS = nv_drv.h $(DRMHEADERS)
-FFBHEADERS = ffb_drv.h $(DRMHEADERS)
-NOUVEAUHEADERS = nouveau_drv.h nouveau_drm.h nouveau_reg.h $(DRMHEADERS)
-PSBHEADERS= psb_drv.h psb_drm.h psb_reg.h psb_kreg.h psb_scene.h \
- psb_schedule.h psb_detear.h $(DRMHEADERS)
-XGIHEADERS = xgi_cmdlist.h xgi_drv.h xgi_misc.h xgi_regs.h $(DRMHEADERS)
-
-PROGS = dristat drmstat
-
-CLEANFILES = *.o *.ko $(PROGS) .depend .*.flags .*.d .*.cmd *.mod.c .tmp_versions
-
-# VERSION is not defined from the initial invocation. It is defined when
-# this Makefile is invoked from the kernel's root Makefile.
-
-ifndef VERSION
-
-ifdef RUNNING_REL
-
-# SuSE has the version.h and autoconf.h headers for the current kernel
-# in /boot as /boot/vmlinuz.version.h and /boot/vmlinuz.autoconf.h.
-# Check these first to see if they match the running kernel.
-
-BOOTVERSION_PREFIX = /boot/vmlinuz.
-
-V := $(shell if [ -f $(BOOTVERSION_PREFIX)version.h ]; then \
- grep UTS_RELEASE $(BOOTVERSION_PREFIX)version.h | \
- cut -d' ' -f3; fi)
-
-ifeq ($(V),"$(RUNNING_REL)")
-HEADERFROMBOOT := 1
-GETCONFIG := MAKEFILES=$(shell pwd)/.config
-HAVECONFIG := y
-endif
-
-# On Red Hat we need to check if there is a .config file in the kernel
-# source directory. If there isn't, we need to check if there's a
-# matching file in the configs subdirectory.
-
-ifneq ($(HAVECONFIG),y)
-HAVECONFIG := $(shell if [ -e $(LINUXDIR)/.config ]; then echo y; fi)
-endif
-
-ifneq ($(HAVECONFIG),y)
-REL_BASE := $(shell echo $(RUNNING_REL) | sed 's/-.*//')
-REL_TYPE := $(shell echo $(RUNNING_REL) | sed 's/[0-9.-]//g')
-ifeq ($(REL_TYPE),)
-RHCONFIG := configs/kernel-$(REL_BASE)-$(MACHINE).config
-else
-RHCONFIG := configs/kernel-$(REL_BASE)-$(MACHINE)-$(REL_TYPE).config
-endif
-HAVECONFIG := $(shell if [ -e $(LINUXDIR)/$(RHCONFIG) ]; then echo y; fi)
-ifneq ($(HAVECONFIG),y)
-RHCONFIG :=
-endif
-endif
-
-ifneq ($(HAVECONFIG),y)
-ifneq ($(0),$(LINUXDIR))
-GETCONFIG += O=$(O)
-endif
-HAVECONFIG := $(shell if [ -e $(O)/.config ]; then echo y; fi)
-endif
-
-ifneq ($(HAVECONFIG),y)
-$(error Cannot find a kernel config file)
-endif
-
-endif
-
-CLEANCONFIG := $(shell if cmp -s $(LINUXDIR)/.config .config; then echo y; fi)
-ifeq ($(CLEANCONFIG),y)
-CLEANFILES += $(LINUXDIR)/.config .config $(LINUXDIR)/tmp_include_depends
-endif
-
-all: modules
-
-modules: includes
- +make -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules
-
-ifeq ($(HEADERFROMBOOT),1)
-
-BOOTHEADERS = version.h autoconf.h
-BOOTCONFIG = .config
-
-CLEANFILES += $(BOOTHEADERS) $(BOOTCONFIG)
-
-includes:: $(BOOTHEADERS) $(BOOTCONFIG)
-
-version.h: $(BOOTVERSION_PREFIX)version.h
- rm -f $@
- ln -s $< $@
-
-autoconf.h: $(BOOTVERSION_PREFIX)autoconf.h
- rm -f $@
- ln -s $< $@
-
-.config: $(BOOTVERSION_PREFIX)config
- rm -f $@
- ln -s $< $@
-endif
-
-# This prepares an unused Red Hat kernel tree for the build.
-ifneq ($(RHCONFIG),)
-includes:: $(LINUXDIR)/.config $(LINUXDIR)/tmp_include_depends .config
-
-$(LINUXDIR)/.config: $(LINUXDIR)/$(RHCONFIG)
- rm -f $@
- ln -s $< $@
-
-.config: $(LINUXDIR)/$(RHCONFIG)
- rm -f $@
- ln -s $< $@
-
-$(LINUXDIR)/tmp_include_depends:
- echo all: > $@
-endif
-
-# Make sure that the shared source files are linked into this directory.
-
-
-SHAREDDIR := .
-
-ifeq ($(shell if [ -d $(SHAREDDIR) ]; then echo y; fi),y)
-includes:: drm_pciids.h
-
-drm_pciids.h: $(SHAREDDIR)/drm_pciids.txt
- sh ./create_linux_pci_lists.sh < $(SHAREDDIR)/drm_pciids.txt
-else
-includes::
-
-endif
-
-clean cleandir:
- rm -rf $(CLEANFILES)
-
-$(MODULE_LIST)::
- make DRM_MODULES=$@ modules
-
-# Build test utilities
-
-PRGCFLAGS = $(CFLAGS) -g -ansi -pedantic -DPOSIX_C_SOURCE=199309L \
- -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE \
- -I. -I../../..
-
-DRMSTATLIBS = -L../../.. -L.. -ldrm -lxf86_os \
- -L../../../../dummylib -ldummy -lm
-
-programs: $(PROGS)
-
-dristat: dristat.c
- $(CC) $(PRGCFLAGS) $< -o $@
-
-drmstat: drmstat.c
- $(CC) $(PRGCFLAGS) $< -o $@ $(DRMSTATLIBS)
-
-install:
- make -C $(LINUXDIR) $(GETCONFIG) SUBDIRS=`pwd` DRMSRCDIR=`pwd` modules_install
-
-else
-
-# Check for kernel versions that we don't support.
-
-BELOW26 := $(shell if [ $(VERSION) -lt 2 -o $(PATCHLEVEL) -lt 6 ]; then \
- echo y; fi)
-
-ifeq ($(BELOW26),y)
-$(error Only 2.6.x and later kernels are supported \
- ($(VERSION).$(PATCHLEVEL).$(SUBLEVEL)))
-endif
-
-ifdef ARCHX86
-ifndef CONFIG_X86_CMPXCHG
-$(error CONFIG_X86_CMPXCHG needs to be enabled in the kernel)
-endif
-endif
-
-# This needs to go before all other include paths.
-CC += -I$(DRMSRCDIR)
-
-# Check for PAGE_AGP definition
-PAGE_AGP := $(shell cat $(LINUXDIR)/include/asm/agp.h 2>/dev/null | \
- grep -c PAGE_AGP)
-
-ifneq ($(PAGE_AGP),0)
-EXTRA_CFLAGS += -DHAVE_PAGE_AGP
-endif
-
-# Start with all modules turned off.
-CONFIG_DRM_GAMMA := n
-CONFIG_DRM_TDFX := n
-CONFIG_DRM_MGA := n
-CONFIG_DRM_I810 := n
-CONFIG_DRM_R128 := n
-CONFIG_DRM_RADEON := n
-CONFIG_DRM_I915 := n
-CONFIG_DRM_SIS := n
-CONFIG_DRM_FFB := n
-CONFIG_DRM_SAVAGE := n
-CONFIG_DRM_VIA := n
-CONFIG_DRM_MACH64 := n
-CONFIG_DRM_NV := n
-CONFIG_DRM_NOUVEAU := n
-CONFIG_DRM_PSB := n
-CONFIG_DRM_XGI := n
-
-# Enable module builds for the modules requested/supported.
-
-ifneq (,$(findstring tdfx,$(DRM_MODULES)))
-CONFIG_DRM_TDFX := m
-endif
-ifneq (,$(findstring r128,$(DRM_MODULES)))
-CONFIG_DRM_R128 := m
-endif
-ifneq (,$(findstring radeon,$(DRM_MODULES)))
-CONFIG_DRM_RADEON := m
-endif
-ifneq (,$(findstring sis,$(DRM_MODULES)))
-CONFIG_DRM_SIS := m
-endif
-ifneq (,$(findstring via,$(DRM_MODULES)))
-CONFIG_DRM_VIA := m
-endif
-ifneq (,$(findstring mach64,$(DRM_MODULES)))
-CONFIG_DRM_MACH64 := m
-endif
-ifneq (,$(findstring ffb,$(DRM_MODULES)))
-CONFIG_DRM_FFB := m
-endif
-ifneq (,$(findstring savage,$(DRM_MODULES)))
-CONFIG_DRM_SAVAGE := m
-endif
-ifneq (,$(findstring mga,$(DRM_MODULES)))
-CONFIG_DRM_MGA := m
-endif
-ifneq (,$(findstring nv,$(DRM_MODULES)))
-CONFIG_DRM_NV := m
-endif
-ifneq (,$(findstring nouveau,$(DRM_MODULES)))
-CONFIG_DRM_NOUVEAU := m
-endif
-ifneq (,$(findstring xgi,$(DRM_MODULES)))
-CONFIG_DRM_XGI := m
-endif
-
-# These require AGP support
-
-ifneq (,$(findstring i810,$(DRM_MODULES)))
-CONFIG_DRM_I810 := m
-endif
-ifneq (,$(findstring i915,$(DRM_MODULES)))
-CONFIG_DRM_I915 := m
-endif
-ifneq (,$(findstring psb,$(DRM_MODULES)))
-CONFIG_DRM_PSB := m
-endif
-include $(DRMSRCDIR)/Makefile.kernel
-
-# Depencencies
-$(drm-objs): $(DRMHEADERS) $(COREHEADERS)
-$(tdfx-objs): $(TDFXHEADERS)
-$(r128-objs): $(R128HEADERS)
-$(mga-objs): $(MGAHEADERS)
-$(i810-objs): $(I810HEADERS)
-$(i915-objs): $(I915HEADERS)
-$(radeon-objs): $(RADEONHEADERS)
-$(sis-objs): $(SISHEADERS)
-$(ffb-objs): $(FFBHEADERS)
-$(savage-objs): $(SAVAGEHEADERS)
-$(via-objs): $(VIAHEADERS)
-$(mach64-objs): $(MACH64HEADERS)
-$(nv-objs): $(NVHEADERS)
-$(nouveau-objs): $(NOUVEAUHEADERS)
-$(psb-objs): $(PSBHEADERS)
-$(xgi-objs): $(XGIHEADERS)
-
-endif
-
+drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \
+ drm_drv.o drm_fops.o drm_ioctl.o drm_irq.o \
+ drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
+ drm_sysfs.o drm_pci.o drm_agpsupport.o drm_scatter.o \
+ drm_memory_debug.o ati_pcigart.o drm_sman.o \
+ drm_hashtab.o drm_mm.o drm_object.o drm_compat.o \
+ drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_crtc.o \
+ drm_edid.o drm_modes.o drm_bo_lock.o drm_regman.o drm_vm_nopage_compat.o
+tdfx-objs := tdfx_drv.o
+r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o
+mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
+i810-objs := i810_drv.o i810_dma.o
+i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_fence.o \
+ i915_buffer.o intel_setup.o intel_i2c.o i915_init.o intel_fb.o \
+ i915_compat.o
+nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \
+ nouveau_object.o nouveau_irq.o nouveau_notifier.o nouveau_swmthd.o \
+ nouveau_sgdma.o nouveau_dma.o nouveau_buffer.o nouveau_fence.o \
+ nv04_timer.o \
+ nv04_mc.o nv40_mc.o nv50_mc.o \
+ nv04_fb.o nv10_fb.o nv40_fb.o \
+ nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
+ nv04_graph.o nv10_graph.o nv20_graph.o \
+ nv40_graph.o nv50_graph.o \
+ nv04_instmem.o nv50_instmem.o
+radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o radeon_fence.o radeon_buffer.o
+sis-objs := sis_drv.o sis_mm.o
+ffb-objs := ffb_drv.o ffb_context.o
+savage-objs := savage_drv.o savage_bci.o savage_state.o
+via-objs := via_irq.o via_drv.o via_map.o via_mm.o via_dma.o via_verifier.o \
+ via_video.o via_dmablit.o via_fence.o via_buffer.o
+mach64-objs := mach64_drv.o mach64_dma.o mach64_irq.o mach64_state.o
+nv-objs := nv_drv.o
+psb-objs := psb_drv.o psb_mmu.o psb_sgx.o psb_irq.o psb_fence.o \
+ psb_buffer.o psb_gtt.o psb_setup.o psb_i2c.o psb_fb.o \
+ psb_schedule.o psb_scene.o psb_reset.o \
+ psb_regman.o psb_xhw.o psb_msvdx.o psb_msvdxinit.o \
+ psb_detear.o
+xgi-objs := xgi_cmdlist.o xgi_drv.o xgi_fb.o xgi_misc.o xgi_pcie.o \
+ xgi_fence.o
+
+ifeq ($(CONFIG_COMPAT),y)
+drm-objs += drm_ioc32.o
+radeon-objs += radeon_ioc32.o
+mga-objs += mga_ioc32.o
+r128-objs += r128_ioc32.o
+i915-objs += i915_ioc32.o
+nouveau-objs += nouveau_ioc32.o
+xgi-objs += xgi_ioc32.o
+endif
+
+obj-m += drm.o
+obj-$(CONFIG_DRM_TDFX) += tdfx.o
+obj-$(CONFIG_DRM_R128) += r128.o
+obj-$(CONFIG_DRM_RADEON)+= radeon.o
+obj-$(CONFIG_DRM_MGA) += mga.o
+obj-$(CONFIG_DRM_I810) += i810.o
+obj-$(CONFIG_DRM_I915) += i915.o
+obj-$(CONFIG_DRM_SIS) += sis.o
+obj-$(CONFIG_DRM_FFB) += ffb.o
+obj-$(CONFIG_DRM_SAVAGE)+= savage.o
+obj-$(CONFIG_DRM_VIA) += via.o
+obj-$(CONFIG_DRM_MACH64)+= mach64.o
+obj-$(CONFIG_DRM_NV) += nv.o
+obj-$(CONFIG_DRM_NOUVEAU) += nouveau.o
+obj-$(CONFIG_DRM_PSB) += psb.o
+obj-$(CONFIG_DRM_XGI) += xgi.o
diff --git a/drivers/gpu/drm-psb/Makefile.kernel b/drivers/gpu/drm-psb/Makefile.kernel
deleted file mode 100644
index 702bf28..0000000
--- a/drivers/gpu/drm-psb/Makefile.kernel
+++ /dev/null
@@ -1,76 +0,0 @@
-#
-# Makefile for the drm device driver. This driver provides support for the
-# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
-#
-# Based on David Woodhouse's mtd build.
-#
-# $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/Makefile.kernel,v 1.18 2003/08/16 17:59:17 dawes Exp $
-#
-
-drm-objs := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \
- drm_drv.o drm_fops.o drm_ioctl.o drm_irq.o \
- drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
- drm_sysfs.o drm_pci.o drm_agpsupport.o drm_scatter.o \
- drm_memory_debug.o ati_pcigart.o drm_sman.o \
- drm_hashtab.o drm_mm.o drm_object.o drm_compat.o \
- drm_fence.o drm_ttm.o drm_bo.o drm_bo_move.o drm_crtc.o \
- drm_edid.o drm_modes.o drm_bo_lock.o drm_regman.o drm_vm_nopage_compat.o
-tdfx-objs := tdfx_drv.o
-r128-objs := r128_drv.o r128_cce.o r128_state.o r128_irq.o
-mga-objs := mga_drv.o mga_dma.o mga_state.o mga_warp.o mga_irq.o
-i810-objs := i810_drv.o i810_dma.o
-i915-objs := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_fence.o \
- i915_buffer.o intel_setup.o intel_i2c.o i915_init.o intel_fb.o \
- i915_compat.o
-nouveau-objs := nouveau_drv.o nouveau_state.o nouveau_fifo.o nouveau_mem.o \
- nouveau_object.o nouveau_irq.o nouveau_notifier.o nouveau_swmthd.o \
- nouveau_sgdma.o nouveau_dma.o nouveau_buffer.o nouveau_fence.o \
- nv04_timer.o \
- nv04_mc.o nv40_mc.o nv50_mc.o \
- nv04_fb.o nv10_fb.o nv40_fb.o \
- nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
- nv04_graph.o nv10_graph.o nv20_graph.o \
- nv40_graph.o nv50_graph.o \
- nv04_instmem.o nv50_instmem.o
-radeon-objs := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o radeon_irq.o r300_cmdbuf.o radeon_fence.o radeon_buffer.o
-sis-objs := sis_drv.o sis_mm.o
-ffb-objs := ffb_drv.o ffb_context.o
-savage-objs := savage_drv.o savage_bci.o savage_state.o
-via-objs := via_irq.o via_drv.o via_map.o via_mm.o via_dma.o via_verifier.o \
- via_video.o via_dmablit.o via_fence.o via_buffer.o
-mach64-objs := mach64_drv.o mach64_dma.o mach64_irq.o mach64_state.o
-nv-objs := nv_drv.o
-psb-objs := psb_drv.o psb_mmu.o psb_sgx.o psb_irq.o psb_fence.o \
- psb_buffer.o psb_gtt.o psb_setup.o psb_i2c.o psb_fb.o \
- psb_schedule.o psb_scene.o psb_reset.o \
- psb_regman.o psb_xhw.o psb_msvdx.o psb_msvdxinit.o \
- psb_detear.o
-xgi-objs := xgi_cmdlist.o xgi_drv.o xgi_fb.o xgi_misc.o xgi_pcie.o \
- xgi_fence.o
-
-ifeq ($(CONFIG_COMPAT),y)
-drm-objs += drm_ioc32.o
-radeon-objs += radeon_ioc32.o
-mga-objs += mga_ioc32.o
-r128-objs += r128_ioc32.o
-i915-objs += i915_ioc32.o
-nouveau-objs += nouveau_ioc32.o
-xgi-objs += xgi_ioc32.o
-endif
-
-obj-m += drm.o
-obj-$(CONFIG_DRM_TDFX) += tdfx.o
-obj-$(CONFIG_DRM_R128) += r128.o
-obj-$(CONFIG_DRM_RADEON)+= radeon.o
-obj-$(CONFIG_DRM_MGA) += mga.o
-obj-$(CONFIG_DRM_I810) += i810.o
-obj-$(CONFIG_DRM_I915) += i915.o
-obj-$(CONFIG_DRM_SIS) += sis.o
-obj-$(CONFIG_DRM_FFB) += ffb.o
-obj-$(CONFIG_DRM_SAVAGE)+= savage.o
-obj-$(CONFIG_DRM_VIA) += via.o
-obj-$(CONFIG_DRM_MACH64)+= mach64.o
-obj-$(CONFIG_DRM_NV) += nv.o
-obj-$(CONFIG_DRM_NOUVEAU) += nouveau.o
-obj-$(CONFIG_DRM_PSB) += psb.o
-obj-$(CONFIG_DRM_XGI) += xgi.o
--
1.7.0.4
More information about the yocto
mailing list