[yocto] Porting of specific Kernel/Driver into yocto.

[Om Prakash PAL]

Hi Bruce,
Yes,its arm board.
Yes, I have verified and kernel bootline is properly passed to the kernel by bootloader.

Best Regards,
Om Prakash Pal
 
-----Original Message-----
From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com] 
Sent: Monday, June 25, 2012 6:38 PM
To: Om Prakash PAL
Cc: Khem Raj; yocto at yoctoproject.org
Subject: Re: [yocto] Porting of specific Kernel/Driver into yocto.

On 12-06-25 08:53 AM, Om Prakash PAL wrote:
> Hi Khem,
> I have build core-image-core. but still this Error:
> ======================================================>
>     11.165466] EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
> [   11.172668] VFS: Mounted root (ext3 filesystem) on device 179:1.
> [   11.179260] Freeing init memory: 316K
> INIT: version 2.88 booting
> Error Cannot open /dev/tty0: No such device or address
> mknod: /dev/console: File exists
>
> =========================================================>
>
> I have set SERIAL_CONSOLE="115200 ttyAMA2"  then why its taking /dev/tty0 ?.

I've lost some of the context on the board you are working with, but
from ttyAMA2, I'm assuming it is an arm board. Have you verified that your
bootloader can pass the kernel bootline properly to the kernel ? It is
(unfortunately) fairly common that it isn't properly passed. If you
modify your configuration to have a built in command line with your
configuration, you may be able to get better setup to debug the
problem.

Cheers,

Bruce

> please help.
>
> Best Regards,
> Om Prakash Pal
> _______________________________________
> From: Khem Raj [raj.khem at gmail.com]
> Sent: Friday, June 22, 2012 11:18 AM
> To: Om Prakash PAL
> Cc: Gary Thomas; yocto at yoctoproject.org
> Subject: Re: [yocto] Porting of specific Kernel/Driver into yocto.
>
> On Thu, Jun 21, 2012 at 10:37 PM, Om Prakash PAL
> <omprakash.pal at stericsson.com>  wrote:
>>
>>>> and then console got  stuck.
>>>
>>>> What do you have SERIAL_CONSOLE set to in your configuration?
>>>
>>> I have set SERIAL_CONSOLE="115200 ttyAMA2". As we are using ttyAMA2 for console.
>>
>>> What is your target device?  Do you really have /dev/ttyAMA2 serial port??.
>>
>> Yes, I have /dev/ttyAMA2 serial port.
>
> Can you try using say poky/master and generate root file system and
> try that out ?
> another option is to try core-image-core
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto