[yocto] basic recipe building - iperf
Khem Raj
raj.khem at gmail.com
Mon Jun 18 19:40:01 PDT 2012
On Monday, June 18, 2012, James Abernathy <jfabernathy at gmail.com> wrote:
>
>
> On Mon, Jun 18, 2012 at 5:29 PM, jfabernathy <jfabernathy at gmail.com>
wrote:
>>
>> On 06/18/2012 05:21 PM, Marc Ferland wrote:
>>>
>>> jfabernathy<jfabernathy at gmail.com> writes:
>>>
>>>> I needed to do some network performance testing on a Crownbay board
and
>>>> needed iperf in that environment. Since I had the
core-image-sato-sdk
>>>> image created, I just booted that and took the tarball from
Sourceforge
>>>> and built it per the readme file instructions:
>>>> ./configure
>>>> make
>>>> make install
>>>> After I completed my test, I thought about why not put that in my
list
>>>> of personal recipes. I found the previous version of iperf in the
>>>> openembedded collection of benchmark recipes and just copied it
over.
>>>> It built and worked fine. There were a lot of items in the .bb
that I
>>>> didn't understand, so I thought for fun I'd just try to build a
recipe
>>>> for iperf 2.0.5 and see what happened. My recipe is simple, mostly
>>>> taken from the openembedded 2.0.4 version had stripped down:
>>>
>>> Hi JF,
>>>
>>> I add the same problem you had with the man page stuff, try this patch.
>>>
>>> Marc
>>
>> thanks, that patch fixed it from a build point of view. now I'll build
the image again and see what happens on the hardware.
>>
>> Jim A
>>
> As expected the new image booted and ran the iperf 2.0.5 just fine. Are
there any plans to add this tool to the Yocto project??
>
You could have just looked into meta-oe/recipes-benchmarks
> Jim A
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20120618/3ce35678/attachment.html>
More information about the yocto
mailing list