[yocto] [PATCH 2/6] crownbay: customize the xorg.conf for the flat panel on the corwnbay kit

[Kamble, Nitin A]

> >> On 07/23/2012 03:06 AM, nitin.a.kamble at intel.com wrote:
> >>> From: Nitin A Kamble <nitin.a.kamble at intel.com>
> >>>
> >>> The kit has Auo 800x600 LCD screen. Configuring Xorg for it.
> >>
> >> I presume the crownbay has additional display options? how does this
> >> impact those?
> >>
> > This change sets the resolution of the screen to 800x600. And this is
> > applicable to LCD screen on the kit as well as external monitor.
> >   I will add a note about it in the log.
> 
> I presume that without this change it was able to detect the appropriate
> resolution of the connected monitor, but not of the LCD?
> 
> If so, this change effectively breaks that autodetection and forces everything
> to the 800x600 display which is arguably very low-resolution by today's
> standards. Why should this be the default? When you refer to "the kit", what
> exactly are you referring to?
> 
> Also, is this a discussion you have already had with Tom? I don't want to
> contradict what he has said regarding this BSP.


EMGD driver on crownbay gives few resolutions as options. By default it tries to set 1366x768 resolution for both LCD and external monitor. 
The Crownbay kit is a suitcase kind of box, which has builtin LCD screen of resolution 800x600. This LCD screen shows only 800x600 of the default 1366x768 area. So The LCD is not able to show all the screen, and IMO it is a functional issue.

For my Dell 1704FPTi monitor which has 1280x1024 native resolution; When connected to the crownbay,  X cannot find a working mode for this monitor. But if I set 800x600 in the xorg.conf as this commit does, then both LCD & external monitor can show the X screen without any issues.

I guess if a 1366x768 resolution monitor is connected to crownbay, it will show the X screen fine, but I don't have such monitor now. And also I think a BSP should not have such resolution requirement for the attached monitor, and attached LCD screen of the kit work without issues.

So the point of this commit is, make default config such that it will work for the LCD screen on the kit as well as any monitor attached. And if someone wants to get better resolution with their external monitor then they need to adjust the xorg.conf accordingly.

BTW I did not have much discussion with Tom on this topic.

Thanks,
Nitin