[yocto] ERROR: QA Issue: Architecture did not match (62 to 3)

[Bruce Ashfield]

On Thu, Jul 26, 2012 at 6:48 PM, Saxena, Rahul <rahul.saxena at intel.com> wrote:
> Hi Bruce,
>
> I think you are right. I do get following warning message:
>
> WARNING: Looked at meta/cfg/standard/rangeley/hdw_frags.txt and meta/cfg/standard/Rangeley/required_frags.txt in
> Directory: meta/cfg/standard.rangeley
>
> However I do find my kernel configuration .cfg and .scc files to be pulled into the build area in tmp/work/rangeley-poky-linux/
> linux-yocto-3.4.4+git2+cxxx.../linux/meta/cfg/kernel-cache/bsp/rangley dir
>
> Hence I am not sure why exactly is the above WARNING occurring..

It may not be finding the new BSP definition, and an automatic one was
generated, which means you
built a defconfig .. which was 32 bit.

If you cat linux-yocto-3.4.4+git2+cxxx.../linux/meta/top_tgt .. what
do you see ?

Bruce



>
>  I am using the master branch.
>
> Rahul
>
> -----Original Message-----
> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
> Sent: Thursday, July 26, 2012 12:08 PM
> To: Saxena, Rahul
> Cc: yocto at yoctoproject.org
> Subject: Re: [yocto] ERROR: QA Issue: Architecture did not match (62 to 3)
>
> On 12-07-26 02:58 PM, Saxena, Rahul wrote:
>> Hmm OK..but not sure what I did wrong.
>>
>> I  just started a new BSP (meta-rangley) by copying over meta-sugarbay
>> (this is a 64-bit bsp) to new layer meta-rangley, renamed all files and variables etc from "sugarbay" to "rangley".
>> Created  new machine standard/common-pc-64 branch in my local clone  of linux-yocto-3.4 and also new meta branch in it.
>>
>> In short I have just copied over all sugarbay stuff to start a new rangley bsp without making any real changes yet.
>> So it seems surprising to get this error message.
>
> If something was dropped from your kernel config when you were working on the BSP, it may have build a default 32 bit, and that could cause the QA error.
>
> Cheers,
>
> Bruce
>
>>
>>
>> Rahul
>>
>> -----Original Message-----
>> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
>> Sent: Thursday, July 26, 2012 11:45 AM
>> To: Saxena, Rahul
>> Cc: yocto at yoctoproject.org
>> Subject: Re: [yocto] ERROR: QA Issue: Architecture did not match (62
>> to 3)
>>
>> On 12-07-26 02:37 PM, Saxena, Rahul wrote:
>>> I get the following error:
>>>
>>> ERROR: QA Issue: Architecture did not match (62 to 3) on
>>> /work/rangeley-poky-linux/linux-yocto-3.4.4+git1+a8cf77018b0faa0d29f1
>>> 4
>>> 83ff4e5a2034dc8edd5_1+6297e4c1d57e1063bfce297c2e12392348598559-r4.0/p
>>> a ckages-split/kernel-vmlinux/boot/vmlinux-3.4.4-yocto-standard
>>>
>>> What does it mean ?
>>
>> You've ended up with a mix of 64 bit and 32 bit objects in a build.
>> So you've got a 64 bit kernel in a 32 bit userspace, or vise versa.
>>
>> Only the x32 kernel has an exception in the QA checker for this.
>>
>> Cheers,
>>
>> Bruce
>>
>>>
>>> I have copied the failure logfile below:
>>>
>>> DEBUG: Executing python function sstate_task_prefunc
>>> DEBUG: Python function sstate_task_prefunc finished
>>> DEBUG: Executing python function do_package
>>> DEBUG: Executing python function package_get_auto_pr
>>> DEBUG: Python function package_get_auto_pr finished
>>> DEBUG: Executing python function perform_packagecopy
>>> DEBUG: Python function perform_packagecopy finished
>>> DEBUG: Executing python function package_do_split_locales
>>> DEBUG: No locale files in this package
>>> DEBUG: Python function package_do_split_locales finished
>>> DEBUG: Executing python function split_and_strip_files
>>> DEBUG: Python function split_and_strip_files finished
>>> DEBUG: Executing python function fixup_perms
>>> DEBUG: Python function fixup_perms finished
>>> DEBUG: Executing python function populate_packages
>>> ERROR: could not open directory
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/work/rangeley-poky-linux/linux-yocto-3.4.4+git1+a8cf77018b0faa0d29f1483ff4e5a2034dc8edd5_1+6297e4c1d57e1063bfce297c2e12392348598559-r4.0/package/lib/modules/3.4.4-yocto-standard:
>>> No such file or directory
>>> FATAL: could not search modules: No such file or directory
>>> DEBUG: Executing python function package_name_hook
>>> DEBUG: Executing python function debian_package_name_hook
>>> DEBUG: LIBNAMES: pkg kernel-vmlinux libs 0 bins 0 sonames []
>>> DEBUG: LIBNAMES: pkg kernel-modules libs 0 bins 0 sonames []
>>> DEBUG: LIBNAMES: pkg kernel-image libs 0 bins 0 sonames []
>>> DEBUG: LIBNAMES: pkg kernel-dev libs 1 bins 1 sonames []
>>> DEBUG: LIBNAMES: pkg kernel-base libs 0 bins 0 sonames []
>>> DEBUG: LIBNAMES: pkg kernel libs 0 bins 0 sonames []
>>> DEBUG: Python function debian_package_name_hook finished
>>> DEBUG: Python function package_name_hook finished
>>> DEBUG: kernel-dev contains dangling link /usr/src/kernel/vmlinux
>>> NOTE: kernel-dev contains dangling symlink to /usr/src/kernel/vmlinux
>>> DEBUG: Python function populate_packages finished
>>> DEBUG: Executing python function package_do_filedeps
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> error: Couldn't exec
>>> /home/rsaxena/YoctoWork2/rangeley1/tmp/sysroots/x86_64-linux/usr/lib/rpm/pythoneggs.py:
>>> No such file or directory
>>> DEBUG: Python function package_do_filedeps finished
>>> DEBUG: Executing python function package_do_shlibs
>>> DEBUG: calculating shlib provides for kernel
>>> DEBUG: calculating shlib provides for kernel-base
>>> DEBUG: calculating shlib provides for kernel-vmlinux
>>> DEBUG: calculating shlib provides for kernel-image
>>> DEBUG: calculating shlib provides for kernel-dev
>>> DEBUG: calculating shlib provides for kernel-modules
>>> DEBUG: calculating shlib requirements for kernel
>>> DEBUG: calculating shlib requirements for kernel-base
>>> DEBUG: calculating shlib requirements for kernel-vmlinux
>>> DEBUG: calculating shlib requirements for kernel-image
>>> DEBUG: calculating shlib requirements for kernel-dev
>>> DEBUG: calculating shlib requirements for kernel-modules
>>> DEBUG: Python function package_do_shlibs finished
>>> DEBUG: Executing python function package_do_pkgconfig
>>> DEBUG: Python function package_do_pkgconfig finished
>>> DEBUG: Executing python function read_shlibdeps
>>> DEBUG: Python function read_shlibdeps finished
>>> DEBUG: Executing python function package_depchains
>>> DEBUG: Python function package_depchains finished
>>> DEBUG: Executing python function emit_pkgdata
>>> DEBUG: Python function emit_pkgdata finished
>>> DEBUG: Executing python function do_package_qa
>>> NOTE: DO PACKAGE QA
>>> NOTE: Checking Package: kernel
>>> NOTE: Checking Package: kernel-base
>>> NOTE: Checking Package: kernel-vmlinux
>>> ERROR: QA Issue: Architecture did not match (62 to 3) on
>>> /work/rangeley-poky-linux/linux-yocto-3.4.4+git1+a8cf77018b0faa0d29f1
>>> 4
>>> 83ff4e5a2034dc8edd5_1+6297e4c1d57e1063bfce297c2e12392348598559-r4.0/p
>>> a ckages-split/kernel-vmlinux/boot/vmlinux-3.4.4-yocto-standard
>>> NOTE: Checking Package: kernel-image
>>> NOTE: Checking Package: kernel-dev
>>> NOTE: Checking Package: kernel-modules
>>> ERROR: QA run found fatal errors. Please consider fixing them.
>>> DEBUG: Python function do_package_qa finished
>>> DEBUG: Python function do_package finished
>>> ERROR: Function failed: do_package_qa
>>>
>>>
>>>
>>> _______________________________________________
>>> yocto mailing list
>>> yocto at yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"