[yocto] nothing building under denzil-7.0.1

[Tom Zanussi]

On Fri, 2012-07-20 at 16:55 -0500, Tom Zanussi wrote:
> On Fri, 2012-07-20 at 15:39 -0500, Tom Zanussi wrote:
> > On Fri, 2012-07-20 at 16:35 -0400, Jim Abernathy wrote:
> > > On 07/20/2012 04:29 PM, Scott Garman wrote:
> > > > On 07/20/2012 01:11 PM, Jim Abernathy wrote:
> > > >> There must be some basic thing I'm missing.  Nothing that I used to
> > > >> build under denzil 7.0 will now build under denzil 7.0.1 or tracking the
> > > >> denzil branch.  Are all the BSPs required to be updated to 7.0.1 before
> > > >> you can run?
> > > >>
> > > >> I'd thought I'd check before I post a bunch of log files.
> > > >>
> > > >> I just downloaded the poky 7.0.1 tarball and cd'ed to that untarred
> > > >> directory and untarred the 7.0 Intel BSPs.
> > > >>
> > > >> There must be a step I'm missing.  otherwise this would not have gotten
> > > >> thru testing before deployment.
> > > >>
> > > >> Jim A
> > > >
> > > > Hi Jim,
> > > >
> > > > We need more specific information about the error(s) you're seeing. 
> > > > We've done extensive QA with 7.0.1 and meta-intel, so I imagine there 
> > > > must be a step you've forgotten.
> > > >
> > > > For example, you are using the denzil branch of meta-intel, right?
> > > >
> > > > Scott
> > > >
> > > 
> > > I think it maybe that old problem with the n450 SRCREC being blank in 
> > > the linux-yocto bbappend file.  Obviously that BSP didn't get fixed 
> > > before 7.0.1 was deployed.  I'll put in the ones I used to patch in and 
> > > see if it works.
> > > 
> > 
> > I updated the n450 in both the denzil and master meta-intel branches,
> > but the tarball still needs to be updated with that fix.
> > 
> > Is this the problem you're seeing, or are there other problems you're
> > seeing with this and/or the other meta-intel BSPs?
> > 
> 
> As a sanity check, I just now downloaded the denzil-7.0.1 tarball and
> the denzil sugarbay tarball and built successfully without any problems.
> 

Also did a fresh clone of meta-intel, checked out meta-intel/denzil and
successfully built n450 with the denzil-7.0.1 tarball here with no
problems.

Tom


> Tom
> 
> 
> > Tom
> > 
> > > Jim A
> > > 
> > > 
> > > _______________________________________________
> > > yocto mailing list
> > > yocto at yoctoproject.org
> > > https://lists.yoctoproject.org/listinfo/yocto
> > 
> > 
> > _______________________________________________
> > yocto mailing list
> > yocto at yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
>