[yocto] [PATCH] mpc8315: build u-boot by default.
Darren Hart
dvhart at linux.intel.com
Sun Jan 29 11:41:37 PST 2012
On 01/27/2012 09:40 AM, Paul Gortmaker wrote:
> On 12-01-27 12:11 PM, Darren Hart wrote:
>>
>>
>> On 01/27/2012 08:22 AM, Paul Gortmaker wrote:
>>> Valdiated on v2011.12 with hardware:
>>>
>>> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>>>
>>> Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
>>>
>>> CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
>>> Board: Freescale MPC8315ERDB Rev 1.0
>>> I2C: ready
>>> DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
>>> Flash: 8 MiB
>>> NAND: 32 MiB
>>> PCIE0: No link
>>> PCIE1: No link
>>> In: serial
>>> Out: serial
>>> Err: serial
>>> Net: eTSEC0, eTSEC1
>>> Hit any key to stop autoboot: 0
>>> => ver
>>>
>>> U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
>>> powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
>>> GNU ld (GNU Binutils) 2.22
>>> =>
>>>
>>> Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
>>
>> Hi Paul,
>>
>> Have you verified that the u-boot image this creates functions properly
>> when flashed to the mpc8315? Last time I tried I bricked the board - and
>
> Was there a specific functional test that you had in mind?
>
> I ask that, since for a basic overall "does it work" type question,
> I think I covered that in the commit log above.
Ah, duh. Sorry. Must. Read. More. Carefully.
Acked-by: Darren Hart <dvhart at linux.intel.com>
>
> Thanks,
> Paul.
>
>
>> still haven't got around to unbricking it.
>>
>> --
>> Darren
>>
>>>
>>> diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf
>>> index d3a5b1c..74ef611 100644
>>> --- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
>>> +++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
>>> @@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
>>>
>>> KERNEL_IMAGETYPE = "uImage"
>>>
>>> +EXTRA_IMAGEDEPENDS += "u-boot"
>>> +UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
>>> +
>>> SERIAL_CONSOLE = "115200 ttyS0"
>>>
>>> MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
>>
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
More information about the yocto
mailing list