[yocto] [PATCH] mpc8315: build u-boot by default.

[Paul Gortmaker]

Valdiated on v2011.12 with hardware:

    U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX

    Reset Status: Software Hard, External/Internal Soft, External/Internal Hard

    CPU:   e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
    Board: Freescale MPC8315ERDB Rev 1.0
    I2C:   ready
    DRAM:  128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
    Flash: 8 MiB
    NAND:  32 MiB
    PCIE0: No link
    PCIE1: No link
    In:    serial
    Out:   serial
    Err:   serial
    Net:   eTSEC0, eTSEC1
    Hit any key to stop autoboot:  0
    => ver

    U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
    powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
    GNU ld (GNU Binutils) 2.22
    =>

Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>

diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf b/meta-yocto/conf/machine/mpc8315e-rdb.conf
index d3a5b1c..74ef611 100644
--- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
+++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
@@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
 
 KERNEL_IMAGETYPE = "uImage"
 
+EXTRA_IMAGEDEPENDS += "u-boot"
+UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
+
 SERIAL_CONSOLE = "115200 ttyS0"
 
 MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
-- 
1.7.7