[yocto] [PATCH 2/2] yocto-bsp: clarify help with reference to meta-intel
Tom Zanussi
tom.zanussi at intel.com
Fri Apr 27 17:26:41 PDT 2012
On Fri, 2012-04-27 at 17:01 -0700, Darren Hart wrote:
>
> On 04/27/2012 12:00 PM, tom.zanussi at intel.com wrote:
> > From: Tom Zanussi <tom.zanussi at intel.com>
> >
> > The current yocto-bsp help assumes knowledge that the meta-intel layer
> > needs to be cloned before it's put into the BBLAYERS. Avoid the
> > guesswork and state the details explicitly in the help.
> >
> > Also, the shorter 'usage' string doesn't mention it at all; it would
> > help to at minimum mention it and refer the user to the detailed help.
> >
> > Fixes [YOCTO #2330].
> >
> > Signed-off-by: Tom Zanussi <tom.zanussi at intel.com>
>
> Some minor nits below:
Thanks for catching those, patches resubmitted...
Tom
>
> > ---
> > scripts/lib/bsp/help.py | 40 ++++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 40 insertions(+), 0 deletions(-)
> >
> > diff --git a/scripts/lib/bsp/help.py b/scripts/lib/bsp/help.py
> > index f78b09b..f849833 100644
> > --- a/scripts/lib/bsp/help.py
> > +++ b/scripts/lib/bsp/help.py
> > @@ -115,6 +115,18 @@ yocto_bsp_create_usage = """
> > 'properties' that will be used to fill out the BSP-specific portions
> > of the BSP. The possible values for the 'karch' paramter can be
> > listed via 'yocto-bsp list karch'.
> > +
> > + NOTE: Once created, you should add your new layer to your
> > + bblayers.conf file in order for it to be subsquently seen and
> > + modified by the yocto-kernel tool.
> > +
> > + See 'yocto bsp help create' for more detailed instructions.
> > +
> > + NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> > + presence of the of the meta-intel layer, so you should also have a
> > + meta-intel layer present and added to your bblayers.conf as well.
>
> Consider:
>
> + NOTE: For x86- and x86_64-based BSPs, the generated BSP assumes the
> + presence of the of the meta-intel layer. Ensure the meta-intel layer
> + is present and added to bblayers.conf.
>
>
> > +
> > + See 'yocto bsp help create' for more detailed instructions.
> > """
> >
> > yocto_bsp_create_help = """
> > @@ -159,9 +171,37 @@ DESCRIPTION
> > bblayers.conf file in order for it to be subsquently seen and
> > modified by the yocto-kernel tool.
> >
> > + For example, assuming your poky repo is at /path/to/poky, your
> > + your new BSP layer is at /path/to/poky/meta-mybsp, and your build
>
>
> The word "your" appears twice in a row.
>
>
> > + directory is /path/to/build:
> > +
> > + $ gedit /path/to/build/conf/bblayers.conf
> > +
> > + BBLAYERS ?= " \\
> > + /path/to/poky/meta \\
> > + /path/to/poky/meta-yocto \\
> > + /path/to/poky/meta-mybsp \\
> > + "
> > +
> > NOTE for x86- and x86_64-based BSPs: The generated BSP assumes the
> > presence of the of the meta-intel layer, so you should also have a
> > meta-intel layer present and added to your bblayers.conf as well.
>
> OK, this is just context, but same comment as above.
>
> > +
> > + For example, assuming your poky repo is at /path/to/poky, your
> > + your new BSP layer is at /path/to/poky/meta-mybsp, and your build
>
> Same double "your" here as well.
>
> > + directory is /path/to/build:
> > +
> > + $ cd /path/to/poky
> > + $ git clone git://git.yoctoproject.org/meta-intel.git
> > +
> > + $ gedit /path/to/build/conf/bblayers.conf
> > +
> > + BBLAYERS ?= " \\
> > + /path/to/poky/meta \\
> > + /path/to/poky/meta-yocto \\
> > + /path/to/poky/meta-intel \\
> > + /path/to/poky/meta-mybsp \\
> > + "
> > """
> >
> > yocto_bsp_list_usage = """
>
More information about the yocto
mailing list