[yocto] [PATCH 0/3] [RFC] enable Pegasus touch screen
Zhai, Edwin
edwin.zhai at intel.com
Wed Sep 28 00:01:06 PDT 2011
On 09/28/2011 04:08 AM, Zanussi, Tom wrote:
> On Mon, 2011-09-26 at 18:03 -0700, Zhai, Edwin wrote:
>> From: Zhai Edwin<edwin.zhai at intel.com>
>>
>> Tom,
>> These changes, based on meta-intel/tzanussi/pegasus, are needed to enable
>> eGalax touch screen on Pegasus. Could you pls. help to review?
>>
>
> Hi Edwin,
>
> First, I don't think this is the correct list for meta-intel stuff,
> please use the yocto list.
Change it now:)
>
> Anyway, the first two patches look ok to me, but the 3rd seems to be a
> combination of what it says in the title, enabling touch screen kernel
> config, and updating the BSP to work with the current kernel recipes.
> The latter should I think be squashed into the base BSP, which isn't
> posted.
>
>> When will you push Pegasus changes into meta-intel/master? We can have a common
>> place for people to try pegasus...
>>
>
> The meta-pegasus you pointed to seems to be an old version, basically
> the same prototype version I gave you for the demo. I thought the
> current one had been updated to address the comments from the quick
> review of Aug 9:
>
> - meta-pegasus - commented-out stuff in pegasus.conf, xorg.conf,
> linux-yocto-2.6.37.bbappend, ReleaseNotes are unrelated to the BSP, etc.
>
> Also, it has a blacksand.pdf and has old kernel recipes, etc.
>
> Basically, it needs to be cleaned up a bit before it can be pulled in,
> and should be buildable without relying on later patches.
Do you mean we need rebased against branch of
meta-intel/tzanussi/pegasus-v2?
>
> Also, I'm wondering if there's a reason it's using 2.6.37 - we're at 3.0
> now, and it would be good if it used that.
Have we tested 3.0 on Pegasus or N450 system? I remember your mentioned
graphic crash with linux 3.0...
>
> Finally, please also add yourself or whoever will be the maintainer
> going forward to meta-intel/MAINTAINERS...
Sure.
Tom,
Thanks for your comments!
>
> Thanks,
>
> Tom
>
>> Thanks,
>> Edwin
>>
>> The following changes since commit 59dc67f6e64a836fc01fa91a1200e76264bb954d:
>>
>> meta-pegasus: new layer for Pegasus (N455) systems (2011-06-15 23:27:47 -0500)
>>
>> are available in the git repository at:
>> git://git.pokylinux.org/poky-contrib gzhai/pegasus
>> http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=gzhai/pegasus
>>
>> Zhai Edwin (3):
>> eGalax touchscreen offical xorg driver
>> Config xorg.conf with eGalax touchscreen input driver
>> Enabled kernel module for eGalax touch screen.
>>
>> meta-pegasus/conf/machine/pegasus.conf | 2 +-
>> .../xf86-input-egalax/88eGalaxCalibrate.sh | 5 ++
>> .../xorg-driver/xf86-input-egalax_3.06.5605.bb | 49 ++++++++++++++++++++
>> .../xserver-xf86-config/pegasus/xorg.conf | 10 ++++
>> .../xorg-xserver/xserver-xf86-config_0.1.bbappend | 2 +
>> .../recipes-kernel/linux/linux-yocto/pegasus.cfg | 4 ++
>> .../linux/linux-yocto_2.6.37.bbappend | 12 +++++
>> 7 files changed, 83 insertions(+), 1 deletions(-)
>> create mode 100755 meta-pegasus/recipes-graphics/xorg-driver/xf86-input-egalax/88eGalaxCalibrate.sh
>> create mode 100644 meta-pegasus/recipes-graphics/xorg-driver/xf86-input-egalax_3.06.5605.bb
>> create mode 100644 meta-pegasus/recipes-kernel/linux/linux-yocto/pegasus.cfg
>> create mode 100644 meta-pegasus/recipes-kernel/linux/linux-yocto_2.6.37.bbappend
>>
>
>
More information about the yocto
mailing list