[yocto] rootfs-ramdisk error
Ni Qingliang
niqingliang at insigma.com.cn
Sun Sep 25 22:03:56 PDT 2011
If changed to jffs2, the resolv.conf error disappear.
On Mon, 2011-09-26 at 10:57 +0800, 倪庆亮 wrote:
> no luck, maybe it is not the order, problem still there.
> and I can't find the /etc/resolv.conf after login.
>
> the console log section:
>
> Checking for -/etc/resolv.conf-.
> Creating link -/etc/resolv.conf- pointing to -/var/run/resolv.conf-.
> Checking for -/etc/resolv.conf-.
> Creating link -/etc/resolv.conf- pointing to -/var/run/resolv.conf-.
> Configuring network interfaces... udhcpc (v1.18.5) started
> Sending discover...
> PHY: mdio at e0024520:02 - Link is Up - 100/Full
> Sending discover...
> Sending select for 192.168.0.108...
> Lease of 192.168.0.108 obtained, lease time 604800
> /etc/udhcpc.d/50default: line 63: /etc/resolv.conf: No space left on
> device
> adding dns 192.168.0.1
> /etc/udhcpc.d/50default: line 67: /etc/resolv.conf: No space left on
> device
> done.
>
>
>
> On Mon, 2011-09-26 at 09:45 +0800, 倪庆亮 wrote:
> > for resolv.conf, maybe /etc/resolv.conf and /var/run/resolv.conf are
> > misordered.
> >
> > in 00_core:
> > l root root 0644 /etc/resolv.conf /var/run/resolv.conf
> > f root root 0644 /var/run/resolv.conf none
> >
> > if no /var/run/resolv.conf, does the first line can be success??
> >
> > maybe we should change the order to:
> >
> > f root root 0644 /var/run/resolv.conf none
> > l root root 0644 /etc/resolv.conf /var/run/resolv.conf
> >
> >
> >
> > On Mon, 2011-09-26 at 09:41 +0800, 倪庆亮 wrote:
> > > I'm using ramdisk, and get some error when booting, the udhcpc can't
> > > write resolv.conf (No space left on device) and the rpm-postinsts fail.
> > >
> > > my analysis:
> > > for the former, I only find some info in ./default/volatiles/00_core,
> > > the /etc/resolv.conf is a link to /var/run/resolv.conf, but I have no
> > > idea about udhcpd's error.
> > >
> > > for the latter, rpm-postinsts, the reason is: in rpm-postinsts, all sh
> > > files have been executed, and moved to *.done,
> > > (through /etc/rcS.d/S98configure), but /etc/rcS.d/S98configure have not
> > > been deleted, so it is executed again when booting, but there is no any
> > > *.sh file, so fail. ( as expected, if the /etc/rpm-postinsts/*.sh is
> > > moved to *.sh.done, the /etc/rcS.d/S98configure should be deleted, but
> > > it does exist in the rootfs)
> > >
> > > the content of /etc/rcS.d/S98configure is:
> > > for i in /etc/rpm-postinsts/*.sh; do
> > > echo "Running postinst $i..."
> > > if [ -f $i ] && sh $i; then
> > > # rm $i
> > > mv $i $i.done
> > > else
> > > echo "ERROR: postinst $i failed."
> > > fi
> > > done
> > > rm -f /etc/rcS.d/S98configure
> > > I think the for sentence is not so robust as expected when no any *.sh
> > > files.
> > >
> > >
> > >
> > > 1. the bootargs in uboot is
> > > root=/dev/ram rw ramdisk_size=65535 console=ttyS1,115200
> > > 2. the image type is
> > > ext2.gz.u-boot
> > > 3. the `df` after login:
> > > root at xx~#df
> > > Filesystem 1K-blocks Used Available Use% Mounted on
> > > /dev/root 16275 11121 4335 72% /
> > > devtmpfs 127664 112 127552 0% /dev
> > > none 127664 112 127552 0% /dev
> > > tmpfs 127664 20 127644 0% /var/volatile
> > > tmpfs 127664 0 127664 0% /media/ram
> > >
> > > the rootfs size is 16M, and the ext2.gz.u-boot is 4.1M.
> > >
> > > 4. indeed, I have encountered one similar problem when using LTIB, that
> > > is:
> > > after login, I can't find the /dev/mtdX, I don't know detail of the
> > > udev, so I checked the auto mount devfs in kernel config, and so get the
> > > expected.
> > >
> > > 5. the bootlog is:
> > > ## Booting kernel from Legacy Image at fc100000 ...
> > > Image Name: Linux-3.0.4
> > > Created: 2011-09-21 8:45:32 UTC
> > > Image Type: PowerPC Linux Kernel Image (gzip compressed)
> > > Data Size: 2262322 Bytes = 2.2 MB
> > > Load Address: 00000000
> > > Entry Point: 00000000
> > > Verifying Checksum ... OK
> > > ## Loading init Ramdisk from Legacy Image at fc500000 ...
> > > Image Name: core-image-sa735-sa735-201109230
> > > Created: 2011-09-23 3:35:58 UTC
> > > Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
> > > Data Size: 4311933 Bytes = 4.1 MB
> > > Load Address: 00000000
> > > Entry Point: 00000000
> > > Verifying Checksum ... OK
> > > ## Flattened Device Tree blob at fc0e0000
> > > Booting using the fdt blob at 0xfc0e0000
> > > Uncompressing Kernel Image ... OK
> > > Loading Ramdisk to 0faf5000, end 0ff11b7d ... OK
> > > Loading Device Tree to 007fa000, end 007ff4ed ... OK
> > > Using MPC831x RDB machine description
> > > Linux version 3.0.4 (ll at myhost) (gcc version 4.6.1 20110627 (prerelease)
> > > (GCC) ) #1 Wed Sep 21 16:45:26 CST 2011
> > > Found initrd at 0xcfaf5000:0xcff11b7d
> > > bootconsole [udbg0] enabled
> > > setup_arch: bootmem
> > > mpc831x_rdb_setup_arch()
> > > Found FSL PCI host bridge at 0x00000000e0008500. Firmware bus number:
> > > 0->0
> > > PCI host bridge /pci at e0008500 (primary) ranges:
> > > MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
> > > MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
> > > Prefetch
> > > IO 0x00000000e0300000..0x00000000e03fffff -> 0x0000000000000000
> > > arch: exit
> > > Zone PFN ranges:
> > > DMA 0x00000000 -> 0x00010000
> > > Normal empty
> > > Movable zone start PFN for each node
> > > early_node_map[1] active PFN ranges
> > > 0: 0x00000000 -> 0x00010000
> > > Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> > > 65024
> > > Kernel command line: root=/dev/ram rw ramdisk_size=65535
> > > console=ttyS1,115200
> > > PID hash table entries: 1024 (order: 0, 4096 bytes)
> > > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> > > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> > > Memory: 249928k/262144k available (4392k kernel code, 12216k reserved,
> > > 156k data, 1111k bss, 172k init)
> > > Kernel virtual memory layout:
> > > * 0xfffdf000..0xfffff000 : fixmap
> > > * 0xfdefd000..0xfe000000 : early ioremap
> > > * 0xd1000000..0xfdefd000 : vmalloc & ioremap
> > > NR_IRQS:512 nr_irqs:512 16
> > > IPIC (128 IRQ sources) at d1000700
> > > clocksource: timebase mult[7800001] shift[22] registered
> > > pid_max: default: 32768 minimum: 301
> > > Mount-cache hash table entries: 512
> > > devtmpfs: initialized
> > > NET: Registered protocol family 16
> > >
> > > PCI: Probing PCI hardware
> > > bio: create slab <bio-0> at 0
> > > Freescale Elo / Elo Plus DMA driver
> > > vgaarb: loaded
> > > usbcore: registered new interface driver usbfs
> > > usbcore: registered new interface driver hub
> > > usbcore: registered new device driver usb
> > > Switching to clocksource timebase
> > > NET: Registered protocol family 2
> > > IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> > > TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> > > TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> > > TCP: Hash tables configured (established 8192 bind 8192)
> > > TCP reno registered
> > > UDP hash table entries: 256 (order: 0, 4096 bytes)
> > > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> > > NET: Registered protocol family 1
> > > RPC: Registered named UNIX socket transport module.
> > > RPC: Registered udp transport module.
> > > RPC: Registered tcp transport module.
> > > RPC: Registered tcp NFSv4.1 backchannel transport module.
> > > Trying to unpack rootfs image as initramfs...
> > > rootfs image is not initramfs (no cpio magic); looks like an initrd
> > > Freeing initrd memory: 4212k freed
> > > WDT driver for MPC8xxx initialized. mode:reset timeout=65535 (32
> > > seconds)
> > > fsl-elo-dma e00082a8.dma: #0 (fsl,elo-dma-channel), irq 71
> > > fsl-elo-dma e00082a8.dma: #1 (fsl,elo-dma-channel), irq 71
> > > fsl-elo-dma e00082a8.dma: #2 (fsl,elo-dma-channel), irq 71
> > > fsl-elo-dma e00082a8.dma: #3 (fsl,elo-dma-channel), irq 71
> > > JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
> > > msgmni has been set to 498
> > > io scheduler noop registered
> > > io scheduler deadline registered
> > > io scheduler cfq registered (default)
> > > Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> > > serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 16) is a 16550A
> > > serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 17) is a 16550A
> > > console [ttyS1] enabled, bootconsole disabled
> > > console [ttyS1] enabled, bootconsole disabled
> > > Freescale QUICC Engine UART device driver
> > > brd: module loaded
> > > loop: module loaded
> > > fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer
> > > ID 0x000089 Chip ID 0x00227e
> > > Amd/Fujitsu Extended Query Table at 0x0040
> > > Amd/Fujitsu Extended Query version 1.3.
> > > number of CFI chips: 1
> > > Creating 7 MTD partitions on "fc000000.flash":
> > > 0x0000000c0000-0x0000000e0000 : "NOR (RO) Platform Version Info"
> > > 0x0000000e0000-0x000000100000 : "NOR (RO) Device Tree Blob"
> > > 0x000000100000-0x000000500000 : "NOR (RO) Linux Kernel Image"
> > > 0x000000500000-0x000002000000 : "NOR (RO) Ramdisk Root File System"
> > > 0x000002000000-0x000004000000 : "NOR (RW) JFFS2 User File System"
> > > 0x000000000000-0x000000080000 : "NOR (RO) U-Boot Image"
> > > 0x000000080000-0x0000000a0000 : "NOR (RO) U-Boot Environment"
> > > Fixed MDIO Bus: probed
> > > eth0: Gianfar Ethernet Controller Version 1.2, 04:00:00:00:00:0a
> > > eth0: Running with NAPI enabled
> > > eth0: RX BD ring size for Q[0]: 256
> > > eth0: TX BD ring size for Q[0]: 256
> > > eth1: Gianfar Ethernet Controller Version 1.2, 04:00:00:00:00:0b
> > > eth1: Running with NAPI enabled
> > > eth1: RX BD ring size for Q[0]: 256
> > > eth1: TX BD ring size for Q[0]: 256
> > > ucc_geth: QE UCC Gigabit Ethernet Controller
> > > Freescale PowerQUICC MII Bus: probed
> > > Freescale PowerQUICC MII Bus: probed
> > > usbmon: debugfs is not available
> > > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > > i2c /dev entries driver
> > > mpc-i2c e0003000.i2c: timeout 1000000 us
> > > at24 0-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
> > > rtc-ds1374 0-0068: rtc core: registered ds1374 as rtc0
> > > at24 0-0051: 256 byte 24c02 EEPROM, writable, 1 bytes/write
> > > pcf857x: probe of 0-0021 failed with error -5
> > > lm75 0-0048: hwmon0: sensor 'tcn75'
> > > lm75: probe of 0-0049 failed with error -5
> > > usbcore: registered new interface driver usbhid
> > > usbhid: USB HID core driver
> > > oprofile: using timer interrupt.
> > > TCP cubic registered
> > > Initializing XFRM netlink socket
> > > NET: Registered protocol family 17
> > > NET: Registered protocol family 15
> > > Registering the dns_resolver key type
> > > rtc-ds1374 0-0068: setting system clock to 2011-09-22 12:17:13 UTC
> > > (1316693833)
> > > RAMDISK: gzip image found at block 0
> > > VFS: Mounted root (ext2 filesystem) on device 1:0.
> > > devtmpfs: mounted
> > > Freeing unused kernel memory: 172k init
> > > INIT: version 2.88 booting
> > > Starting udev
> > > Starting Bootlog daemon: bootlogd.
> > > Configuring network interfaces... udhcpc (v1.18.5) started
> > > Sending discover...
> > > PHY: mdio at e0024520:02 - Link is Up - 100/Full
> > > Sending discover...
> > > Sending select for 192.168.0.108...
> > > Lease of 192.168.0.108 obtained, lease time 604800
> > > /etc/udhcpc.d/50default: line 63: /etc/resolv.conf: No space left on
> > > device
> > > adding dns 192.168.0.1
> > > /etc/udhcpc.d/50default: line 67: /etc/resolv.conf: No space left on
> > > device
> > > done.
> > > Fri Sep 23 03:35:00 UTC 2011
> > > Running postinst /etc/rpm-postinsts/*.sh...
> > > ERROR: postinst /etc/rpm-postinsts/*.sh failed.
> > > INIT: Entering runlevel: 5
> > > Starting internet superserver: inetd.
> > > Starting syslogd/klogd: done
> > > Stopping Bootlog daemon: bootlogd.
> > >
> > >
> > > --
> > > Yi Qingliang
> > > niqingliang at insigma.com.cn
> > > http://niqingliang2003.wordpress.com
> > >
> > >
> >
> > --
> > Yi Qingliang
> > niqingliang at insigma.com.cn
> > http://niqingliang2003.wordpress.com
> >
> >
>
> --
> Yi Qingliang
> niqingliang at insigma.com.cn
> http://niqingliang2003.wordpress.com
>
>
--
Yi Qingliang
niqingliang at insigma.com.cn
http://niqingliang2003.wordpress.com
More information about the yocto
mailing list