[yocto] rootfs-ramdisk error
Ni Qingliang
niqingliang at insigma.com.cn
Sun Sep 25 18:45:20 PDT 2011
for resolv.conf, maybe /etc/resolv.conf and /var/run/resolv.conf are
misordered.
in 00_core:
l root root 0644 /etc/resolv.conf /var/run/resolv.conf
f root root 0644 /var/run/resolv.conf none
if no /var/run/resolv.conf, does the first line can be success??
maybe we should change the order to:
f root root 0644 /var/run/resolv.conf none
l root root 0644 /etc/resolv.conf /var/run/resolv.conf
On Mon, 2011-09-26 at 09:41 +0800, 倪庆亮 wrote:
> I'm using ramdisk, and get some error when booting, the udhcpc can't
> write resolv.conf (No space left on device) and the rpm-postinsts fail.
>
> my analysis:
> for the former, I only find some info in ./default/volatiles/00_core,
> the /etc/resolv.conf is a link to /var/run/resolv.conf, but I have no
> idea about udhcpd's error.
>
> for the latter, rpm-postinsts, the reason is: in rpm-postinsts, all sh
> files have been executed, and moved to *.done,
> (through /etc/rcS.d/S98configure), but /etc/rcS.d/S98configure have not
> been deleted, so it is executed again when booting, but there is no any
> *.sh file, so fail. ( as expected, if the /etc/rpm-postinsts/*.sh is
> moved to *.sh.done, the /etc/rcS.d/S98configure should be deleted, but
> it does exist in the rootfs)
>
> the content of /etc/rcS.d/S98configure is:
> for i in /etc/rpm-postinsts/*.sh; do
> echo "Running postinst $i..."
> if [ -f $i ] && sh $i; then
> # rm $i
> mv $i $i.done
> else
> echo "ERROR: postinst $i failed."
> fi
> done
> rm -f /etc/rcS.d/S98configure
> I think the for sentence is not so robust as expected when no any *.sh
> files.
>
>
>
> 1. the bootargs in uboot is
> root=/dev/ram rw ramdisk_size=65535 console=ttyS1,115200
> 2. the image type is
> ext2.gz.u-boot
> 3. the `df` after login:
> root at xx~#df
> Filesystem 1K-blocks Used Available Use% Mounted on
> /dev/root 16275 11121 4335 72% /
> devtmpfs 127664 112 127552 0% /dev
> none 127664 112 127552 0% /dev
> tmpfs 127664 20 127644 0% /var/volatile
> tmpfs 127664 0 127664 0% /media/ram
>
> the rootfs size is 16M, and the ext2.gz.u-boot is 4.1M.
>
> 4. indeed, I have encountered one similar problem when using LTIB, that
> is:
> after login, I can't find the /dev/mtdX, I don't know detail of the
> udev, so I checked the auto mount devfs in kernel config, and so get the
> expected.
>
> 5. the bootlog is:
> ## Booting kernel from Legacy Image at fc100000 ...
> Image Name: Linux-3.0.4
> Created: 2011-09-21 8:45:32 UTC
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 2262322 Bytes = 2.2 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> ## Loading init Ramdisk from Legacy Image at fc500000 ...
> Image Name: core-image-sa735-sa735-201109230
> Created: 2011-09-23 3:35:58 UTC
> Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
> Data Size: 4311933 Bytes = 4.1 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at fc0e0000
> Booting using the fdt blob at 0xfc0e0000
> Uncompressing Kernel Image ... OK
> Loading Ramdisk to 0faf5000, end 0ff11b7d ... OK
> Loading Device Tree to 007fa000, end 007ff4ed ... OK
> Using MPC831x RDB machine description
> Linux version 3.0.4 (ll at myhost) (gcc version 4.6.1 20110627 (prerelease)
> (GCC) ) #1 Wed Sep 21 16:45:26 CST 2011
> Found initrd at 0xcfaf5000:0xcff11b7d
> bootconsole [udbg0] enabled
> setup_arch: bootmem
> mpc831x_rdb_setup_arch()
> Found FSL PCI host bridge at 0x00000000e0008500. Firmware bus number:
> 0->0
> PCI host bridge /pci at e0008500 (primary) ranges:
> MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
> MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
> Prefetch
> IO 0x00000000e0300000..0x00000000e03fffff -> 0x0000000000000000
> arch: exit
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00010000
> Normal empty
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0x00000000 -> 0x00010000
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 65024
> Kernel command line: root=/dev/ram rw ramdisk_size=65535
> console=ttyS1,115200
> PID hash table entries: 1024 (order: 0, 4096 bytes)
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 249928k/262144k available (4392k kernel code, 12216k reserved,
> 156k data, 1111k bss, 172k init)
> Kernel virtual memory layout:
> * 0xfffdf000..0xfffff000 : fixmap
> * 0xfdefd000..0xfe000000 : early ioremap
> * 0xd1000000..0xfdefd000 : vmalloc & ioremap
> NR_IRQS:512 nr_irqs:512 16
> IPIC (128 IRQ sources) at d1000700
> clocksource: timebase mult[7800001] shift[22] registered
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> devtmpfs: initialized
> NET: Registered protocol family 16
>
> PCI: Probing PCI hardware
> bio: create slab <bio-0> at 0
> Freescale Elo / Elo Plus DMA driver
> vgaarb: loaded
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> Switching to clocksource timebase
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> TCP reno registered
> UDP hash table entries: 256 (order: 0, 4096 bytes)
> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> Trying to unpack rootfs image as initramfs...
> rootfs image is not initramfs (no cpio magic); looks like an initrd
> Freeing initrd memory: 4212k freed
> WDT driver for MPC8xxx initialized. mode:reset timeout=65535 (32
> seconds)
> fsl-elo-dma e00082a8.dma: #0 (fsl,elo-dma-channel), irq 71
> fsl-elo-dma e00082a8.dma: #1 (fsl,elo-dma-channel), irq 71
> fsl-elo-dma e00082a8.dma: #2 (fsl,elo-dma-channel), irq 71
> fsl-elo-dma e00082a8.dma: #3 (fsl,elo-dma-channel), irq 71
> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
> msgmni has been set to 498
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 16) is a 16550A
> serial8250.0: ttyS1 at MMIO 0xe0004600 (irq = 17) is a 16550A
> console [ttyS1] enabled, bootconsole disabled
> console [ttyS1] enabled, bootconsole disabled
> Freescale QUICC Engine UART device driver
> brd: module loaded
> loop: module loaded
> fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer
> ID 0x000089 Chip ID 0x00227e
> Amd/Fujitsu Extended Query Table at 0x0040
> Amd/Fujitsu Extended Query version 1.3.
> number of CFI chips: 1
> Creating 7 MTD partitions on "fc000000.flash":
> 0x0000000c0000-0x0000000e0000 : "NOR (RO) Platform Version Info"
> 0x0000000e0000-0x000000100000 : "NOR (RO) Device Tree Blob"
> 0x000000100000-0x000000500000 : "NOR (RO) Linux Kernel Image"
> 0x000000500000-0x000002000000 : "NOR (RO) Ramdisk Root File System"
> 0x000002000000-0x000004000000 : "NOR (RW) JFFS2 User File System"
> 0x000000000000-0x000000080000 : "NOR (RO) U-Boot Image"
> 0x000000080000-0x0000000a0000 : "NOR (RO) U-Boot Environment"
> Fixed MDIO Bus: probed
> eth0: Gianfar Ethernet Controller Version 1.2, 04:00:00:00:00:0a
> eth0: Running with NAPI enabled
> eth0: RX BD ring size for Q[0]: 256
> eth0: TX BD ring size for Q[0]: 256
> eth1: Gianfar Ethernet Controller Version 1.2, 04:00:00:00:00:0b
> eth1: Running with NAPI enabled
> eth1: RX BD ring size for Q[0]: 256
> eth1: TX BD ring size for Q[0]: 256
> ucc_geth: QE UCC Gigabit Ethernet Controller
> Freescale PowerQUICC MII Bus: probed
> Freescale PowerQUICC MII Bus: probed
> usbmon: debugfs is not available
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> i2c /dev entries driver
> mpc-i2c e0003000.i2c: timeout 1000000 us
> at24 0-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
> rtc-ds1374 0-0068: rtc core: registered ds1374 as rtc0
> at24 0-0051: 256 byte 24c02 EEPROM, writable, 1 bytes/write
> pcf857x: probe of 0-0021 failed with error -5
> lm75 0-0048: hwmon0: sensor 'tcn75'
> lm75: probe of 0-0049 failed with error -5
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> oprofile: using timer interrupt.
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Registering the dns_resolver key type
> rtc-ds1374 0-0068: setting system clock to 2011-09-22 12:17:13 UTC
> (1316693833)
> RAMDISK: gzip image found at block 0
> VFS: Mounted root (ext2 filesystem) on device 1:0.
> devtmpfs: mounted
> Freeing unused kernel memory: 172k init
> INIT: version 2.88 booting
> Starting udev
> Starting Bootlog daemon: bootlogd.
> Configuring network interfaces... udhcpc (v1.18.5) started
> Sending discover...
> PHY: mdio at e0024520:02 - Link is Up - 100/Full
> Sending discover...
> Sending select for 192.168.0.108...
> Lease of 192.168.0.108 obtained, lease time 604800
> /etc/udhcpc.d/50default: line 63: /etc/resolv.conf: No space left on
> device
> adding dns 192.168.0.1
> /etc/udhcpc.d/50default: line 67: /etc/resolv.conf: No space left on
> device
> done.
> Fri Sep 23 03:35:00 UTC 2011
> Running postinst /etc/rpm-postinsts/*.sh...
> ERROR: postinst /etc/rpm-postinsts/*.sh failed.
> INIT: Entering runlevel: 5
> Starting internet superserver: inetd.
> Starting syslogd/klogd: done
> Stopping Bootlog daemon: bootlogd.
>
>
> --
> Yi Qingliang
> niqingliang at insigma.com.cn
> http://niqingliang2003.wordpress.com
>
>
--
Yi Qingliang
niqingliang at insigma.com.cn
http://niqingliang2003.wordpress.com
More information about the yocto
mailing list