[yocto] Fwd: HOB failure

[Brian Duffy]

Right on Jessica,

The Human Oriented Builder launched successfully with your help. I feel more
human already ;-)

On Wed, Sep 7, 2011 at 1:36 PM, Zhang, Jessica <jessica.zhang at intel.com>wrote:

>  OK, somehow you have issue writing oe-beta/build, which I’m not quite
> sure why.  But to work around the issue with hob, do the same as what you
> did when you built core-image-minimal.  First, do “source oe-init-build-env
>  ~/my-build”, which will setup your bitbake env and swith dir to
> ~/my-build.  Then do hob.  Please don’t make any directory changes between
> these 2 steps.****
>
> ** **
>
> Thanks,****
>
> Jessica****
>
> ** **
>
> *From:* yocto-bounces at yoctoproject.org [mailto:
> yocto-bounces at yoctoproject.org] *On Behalf Of *Brian Duffy
> *Sent:* Wednesday, September 07, 2011 10:29 AM
> *To:* yocto at yoctoproject.org
> *Subject:* [yocto] Fwd: HOB failure****
>
> ** **
>
> ** **
>
> ---------- Forwarded message ----------
> From: *Brian Duffy* <brduffy at gmail.com>
> Date: Wed, Sep 7, 2011 at 1:26 PM
> Subject: Re: [yocto] HOB failure
> To: "Zhang, Jessica" <jessica.zhang at intel.com>
>
>
> Hi Jessica,****
>
> ** **
>
> I already built core-image-minimal last night. I am able to run it in the
> emulator as long as I run ****
>
> run oe-init-build-env first. That complains that it can't write to
> "oe-beta/build" and recommends I pass it a path to my own build directory.
> When building the image I passed it "~/my-build" which worked fine. Then
> when I went to run the emulator I found that certain env variables were not
> set so I ran it again but did not provide a path parameter. It fails with
> the same error but the environment variables work well enough after that to
> run the emulator from the ~/my-build directory. Anyway, that is what I am
> doing before I run hob and you saw the error I am getting. Any suggestions.
> ****
>
> ** **
>
> thnx****
>
> ** **
>
> Brian****
>
> ** **
>
> On Wed, Sep 7, 2011 at 12:24 PM, Zhang, Jessica <jessica.zhang at intel.com>
> wrote:****
>
> Hi Brian,****
>
>  ****
>
> Were you able to build any image using the same build tree, can you do a
> quick “bitbake core-image-minimal” instead of doing hob, seems you have some
> environment setup issue.****
>
>  ****
>
> Thanks,****
>
> Jessica****
>
>  ****
>
> *From:* yocto-bounces at yoctoproject.org [mailto:
> yocto-bounces at yoctoproject.org] *On Behalf Of *Brian Duffy
> *Sent:* Wednesday, September 07, 2011 9:11 AM
> *To:* yocto at yoctoproject.org
> *Subject:* [yocto] HOB failure****
>
>  ****
>
> Hi,****
>
>  ****
>
> I'm having trouble running hob ...****
>
>  ****
>
> [brian at brduffy-PC my-build]$ hob****
>
> You had no conf/hob.local.conf file. An initial version of this
> configuration****
>
> file has therefore been created for you. This file will be used to store
> any****
>
> configuration values you set in hob.****
>
>  ****
>
> Pseudo is not present but is required, building this first before the main
> build****
>
> Loading cache: 100% |###########################################| ETA:
>  00:00:00****
>
> Loaded 1029 entries from dependency cache.****
>
>  ****
>
> OE Build Configuration:****
>
> BB_VERSION        = "1.13.3"****
>
> TARGET_ARCH       = "i586"****
>
> TARGET_OS         = "linux"****
>
> MACHINE           = "qemux86"****
>
> DISTRO            = "poky"****
>
> DISTRO_VERSION    = "1.0+snapshot-20110907"****
>
> TUNE_FEATURES     = "m32 i586"****
>
> TARGET_FPU        = ""****
>
> meta              ****
>
> meta-yocto        = "<unknown>:<unknown>"****
>
>  ****
>
> NOTE: Resolving any missing task queue dependencies****
>
> NOTE: Preparing runqueue****
>
> NOTE: Executing SetScene Tasks****
>
> NOTE: Executing RunQueue Tasks****
>
> NOTE: Tasks Summary: Attempted 70 tasks of which 70 didn't need to be rerun
> and 0 failed.****
>
> /home/brian/oe-beta/scripts/bitbake: line 73:
> /home/brian/oe-beta/build/pseudodone: Permission denied****
>
> cat: /home/brian/oe-beta/build/pseudodone: No such file or directory****
>
> /home/brian/oe-beta/scripts/bitbake: line 82: /pseudo: No such file or
> directory****
>
> [brian at brduffy-PC my-build]$ ****
>
>  ****
>
> Do I just have a permission problem?****
>
>  ****
>
> --
> Duff****
>
>
>
> ****
>
> ** **
>
> --
> Duff****
>
>
>
> ****
>
> ** **
>
> --
> Duff****
>



-- 
Duff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20110907/77a8e236/attachment.html>